--- nickle-2.79.orig/ChangeLog +++ nickle-2.79/ChangeLog @@ -1,3 +1,11 @@ +commit 62538ae681138311fdb0d60419049dee291e4b4e +Author: Keith Packard +Date: Thu Mar 23 06:45:53 2017 +0100 + + Update to version 2.79 + + Signed-off-by: Keith Packard + commit fb25c7d70763848f4bbb110c747ece6a0a667c29 Author: Keith Packard Date: Thu Mar 16 10:51:13 2017 -0700 --- nickle-2.79.orig/debian/changelog +++ nickle-2.79/debian/changelog @@ -0,0 +1,414 @@ +nickle (2.79-2) unstable; urgency=low + + * Update to standards 3.9.8 + * Switch to 3.0 (quilt) format + * Update to dh version 10 + * Avoid installing COPYING files which duplicate copyright data + * Make examples which are scripts executable + + -- Keith Packard Thu, 23 Mar 2017 07:45:52 +0100 + +nickle (2.79-1) unstable; urgency=low + + * Fix bus error on sparc64 due to unaligned DataCache. + + -- Keith Packard Thu, 16 Mar 2017 10:52:49 -0700 + +nickle (2.78-1) unstable; urgency=low + + * Add sudoku generator and solver example. + * Fix write order of large queued data. + * Add JSON input/output library. + * Use release date in configure.in instead of `date` + * Initialize 'replace' in NewTypedBox. (Closes: #857840, #857814, #857815) + * Adapt test to new automake. + + -- Keith Packard Wed, 15 Mar 2017 09:35:37 -0700 + +nickle (2.77-1) unstable; urgency=low + + * Build tutorial when docbook2pdf is available + * tutorial: Use sgml entities instead of < and > + * Tutorial: twixt doesn't have an optional 'else' block + * Rename nickle tutorial to nickle-tutorial + * Corrected some Nickle Tour nits + * Handle OpFarJump in CompileReachable + + -- Keith Packard Tue, 06 Nov 2012 11:04:49 -0800 + +nickle (2.76-1) unstable; urgency=low + + * Fix FTBS on Hurd-i386. + * Don't crash when using initializer with forward ref type + * Fix crashes when MemCollect occurs during Twixt execution + + -- Keith Packard Mon, 11 Jun 2012 13:29:18 -0700 + +nickle (2.75-1) unstable; urgency=low + + * Fix ref types in array pointer operations (&foo->bar) + * Shorten value printing in stack traces + * Switch to 'dh' for building package. Closes: #666356 + + -- Keith Packard Fri, 30 Mar 2012 08:42:02 -0700 + +nickle (2.74-1) unstable; urgency=low + + * Fix Semaphore::wait to not deadlock + * Switch debian package building to use pdebuild + + -- Keith Packard Sat, 03 Mar 2012 17:16:35 -0800 + +nickle (2.73-1) unstable; urgency=low + + * add gamma function + * fix readline interaction when using pipes + * add sort and skiplist to library + * add is_type and has_member built-ins + * typecheck switch statements + + -- Keith Packard Wed, 29 Feb 2012 17:00:25 +1300 + +nickle (2.72-1) unstable; urgency=low + + * wait3 returns 0 when there's nothing left to do + * Rename configure.in to configure.ac + * Block in select instead of sigsuspend when waiting for I/O + * Keep readline from catching signals + + -- Keith Packard Sun, 29 Jan 2012 22:03:44 -0800 + +nickle (2.71-1) unstable; urgency=low + + * Update old-school variable length struct allocation to ansi-C + * Replace most parameterized macros in nickle.h and value.h with + static inline functions. + * Clean up a pile of build warnings + * Catch attempts to use uninitialized pointer contents + * Exit after two consecutive interrupts + * Cleanup struct type changes + + -- Keith Packard Fri, 25 Nov 2011 11:43:31 -0800 + +nickle (2.70-1) unstable; urgency=low + + * Make parse_csv_t type public + * Throw 'bad_csv_parse' exception on unclosed quotes + * Add factorial tests + * Repliace naïve factorial algorithm with the prime swing + algorithm defined by Peter Luschny + * Update to standard 3.8.4 + + -- Keith Packard Tue, 06 Jul 2010 01:22:30 -0400 + +nickle (2.69-1) unstable; urgency=low + + * Make debian build depend on libreadline-dev not libreadline5-dev. + * Get math-tables.5c built before tests are run + * Fix trig boundary conditions. + * Add tests for math functions. + * math.5c: fix quadrant errors in atan/asin/acos + + -- Keith Packard Thu, 17 Sep 2009 14:30:42 -0700 + +nickle (2.68-1) unstable; urgency=low + + * Add README.release + * Bump debian standards to 3.8.0 + * Allow background nickle to not poll on tty ownership + * Remove support for non-SIGIO pipes + * Fix floating point printing to correctly round output + + -- Keith Packard Sat, 21 Jun 2008 02:17:49 -0700 + +nickle (2.67-1) unstable; urgency=low + * Don't require string to be first param on builtin exceptions + * Add io_eof exceptions when reading at EOF + * Add unix-domain socket support + * Make SIGINT raise signal exception + * Add pid/uid/gid builtins + * Add unlink/rename/mkdir/rmdir builtins + * Autoimport works better on nested namespaces + + -- Keith Packard Wed, 19 Mar 2008 16:09:04 -0700 + +nickle (2.66-1) unstable; urgency=low + * Support autoload/autoimport of nested namespaces. + * Allow 'print' to find unpublished names + + -- Keith Packard Sun, 13 Jan 2008 17:39:49 -0800 + +nickle (2.65-1) unstable; urgency=low + * Add new '+' type operator for subtyping struct/union + * Eliminate segfault when pretty printing func declarations + * Check for duplicate func param/struct member names + + -- Keith Packard Sun, 06 Jan 2008 16:38:51 -0800 + +nickle (2.64-1) unstable; urgency=low + * Fix float floor/ceil with small values + * Copy hash key/value on insert + * Bump to version 2.64 + + -- Keith Packard Fri, 04 Jan 2008 00:41:15 -0800 + +nickle (2.63-1) unstable; urgency=low + * Avoid using extra libraries unless necessary + * Fix -Wl,-E testing by using AC_LINK_IFELSE + * Make foreign objects equal when they point at the same data + * Bump to version 2.63 + + -- Keith Packard Sat, 29 Dec 2007 16:02:57 -0800 + +nickle (2.62-1) unstable; urgency=low + * Add modulus test case + * Fix % and // operators to follow modulus rules + * Update manual to fix // and % documentation + * Bump to version 2.62 + + -- Keith Packard Sun, 09 Dec 2007 21:14:27 -0800 + +nickle (2.61-1) unstable; urgency=low + * Allow '.' before struct elt in initializers + * Update builtins, tests and examples to use the new syntax + * Bump to version 2.61 + + -- Keith Packard Sun, 25 Nov 2007 21:57:24 -0800 + +nickle (2.60-1) unstable; urgency=low + * Bump to version 2.60 + * Flush file output on exit call. + * Extend Ctype namespace to latin-1. + * Manage file buffer chains with explicit malloc/free. + + -- Keith Packard Tue, 02 Oct 2007 01:55:20 -0700 + +nickle (2.59-1) unstable; urgency=low + * Bump to version 2.59 + * Have git ignore nickle binary + * Clean up some autotools warnings + * Make default rational display not include braces + * Clean up some lintian warnings + * Construct ChangeLog from git history for distribution. + * No tail calls without a parent frame + + -- Keith Packard Sun, 23 Sep 2007 21:16:34 -0700 + +nickle (2.58-1) unstable; urgency=low + * CCITT/ITU CRC-32 computation example + * changed import PRNG to autoimport + * get rid of archaic "v" print and scan functions + * fixed signededness bug in integer carry calculation + + -- Keith Packard Thu, 26 Apr 2007 07:58:34 -0700 + +nickle (2.57-1) unstable; urgency=low + * example/fourfours was using xor instead of exponentiation + * De-macroize allocator. + * Merge IntBinaryOperate into BinaryOperate. + * PRNG is no longer loaded by default, tests need to load it. + * Avoid broken GCC signed integer changes using -fwrapv. + * Move version number to configure.in script and out of ChangeLog. + + -- Keith Packard Fri, 23 Mar 2007 12:10:39 -0700 + +nickle (2.56-1) unstable; urgency=low + * Fix Catch object initialization order to avoid segfault + + -- Keith Packard Tue, 5 Dec 2006 12:57:06 -0800 + +nickle (2.55-1) unstable; urgency=low + * Fix mismatching catch nesting depth in multi-peer try/catch + * Add fourfours.5c example + * Update debian-policy version to 3.7.2.1 + + -- Keith Packard Tue, 5 Dec 2006 03:39:50 -0800 + +nickle (2.54-1) unstable; urgency=low + * time() builtin needs to return all 32 bits + * Update standards to 3.7.2 + * Compute NICKLELIBDIR at build time + + -- Keith Packard Sat, 20 May 2006 10:39:38 -0500 + +nickle (2.53-1) unstable; urgency=low + * Use rpmbuild instead of rpm to build rpms (Keith Packard) + * Permit {} in numbers to allow exact rational input + (Keith Packard) + + -- Bart Massey Sat, 28 Jan 2006 12:05:26 -0800 + +nickle (2.52-1) unstable; urgency=low + * Add needed autoloads/autoimports to fix + bugs introduced in examples, library (Bart Massey) + + -- Bart Massey Sat, 11 Dec 2005 23:05:49 -0800 + +nickle (2.51-1) unstable; urgency=low + * Don't load every random library; make the user autoload or + autoimport them if they want them instead (Bart Massey) + * Fixed bug introduced in copy function (Bart Massey) + * Added &&= and ||= operators (Bart Massey) + + -- Bart Massey Fri, 10 Dec 2005 14:11:45 -0800 + +nickle (2.50-1) unstable; urgency=low + * Solaris build fixes (Bart Massey) + * Various argument parsing buglets, including mis-parsing single character + options (Bart Massey) + * Permit any numeric type to TypeBinaryIntegral as required by + unified numeric types. Representation errors will be caught by + runtime system (Keith Packard) + * Add system() popen() and run_process() (Bart Massey) + * cbrt must use more intermediate precision to hit the + specified error bound (Keith Packard) + + -- Keith Packard Tue, 6 Dec 2005 20:25:02 -0800 + +nickle (2.49-1) unstable; urgency=low + * Fix &foo() return type to be pointer rather than reference. + * Always set SO_BROADCAST for UDP sockets + * Rewrite parse-args module to be more useful (Bart Massey) + * Replace ad-hoc argument parsing code with parse-args (Bart Massey) + + -- Keith Packard Tue, 2 Aug 2005 23:10:30 -0700 + +nickle (2.48-1) unstable; urgency=low + * Reference valued functions assigned to references need to avoid copy + * avoid use of 'long long' type in rational.c, use 'signed_digit' instead + * add 'π' as an alias for pi. + + -- Keith Packard Thu, 16 Jun 2005 13:53:06 -0700 + +nickle (2.47-1) unstable; urgency=low + * Make builtin functions return pointers instead of references. + * Check for NULL hash value in a valid hash element. + * Initialize base.func pointer to NULL (Eric Anholt) + * Functions returning reference type need to auto-dereference on return + + -- Keith Packard Tue, 15 Mar 2005 11:29:22 -0800 + +nickle (2.46-1) unstable; urgency=low + * Fix error state confusion about nl handling + * Make File builtins use error_type typedef instead of the union directly + * Fix DoublePart to survive invalid value representations + + -- Keith Packard Thu, 13 Jan 2005 21:46:26 -0800 + +nickle (2.45-1) unstable; urgency=low + * Add foreign function interface + * Fix floating point printing a bit + + -- Keith Packard Fri, 24 Dec 2004 01:02:01 -0800 + +nickle (2.44-1) unstable; urgency=low + * Add copyrights and eliminate non-DFSG examples. Closes: 275277. + * Fix seg fault when copying large stacks + * Replace natural and string hash function with crc32 + * Make compatible with automake 1.9 + * Fix several minor resizable array bugs + + -- Keith Packard Wed, 1 Dec 2004 20:28:17 -0800 + +nickle (2.43-1) unstable; urgency=low + * rewrite garbage collector to use simpler data structures + + -- Keith Packard Thu, 12 Aug 2004 21:21:28 -0700 + +nickle (2.42-1) unstable; urgency=low + * unlimit stack to avoid crashes in recursive GC marking + * add skiplists as an example + * fix precedence of ** so that ++x**2 works + * fix crash in HashEqual + * fix minor newline tracking bug in lexer + * add do_make_uninit (Bart Massey) + * fix nasty allocator crash with continuations + * fix handling of parallel catch blocks + * fix tail call to longjmp + + -- Keith Packard Wed, 4 Aug 2004 11:30:08 -0700 + +nickle (2.41-1) unstable; urgency=low + * Make a few grammar tweaks to improve NL handling + * Fix crash with empty array/hash initializers + * Add doc string support -- a comment following a function + or exception. + * Eliminate visible uses of nasty implicit unions. + * Accept ** and && as unary operators + * Fix some uses of & in lvalues + + -- Keith Packard Thu, 17 Jun 2004 17:02:13 -0700 + +nickle (2.38-1) unstable; urgency=low + * fix manual to include correct version and date + + -- Keith Packard Thu, 27 May 2004 23:40:13 -0700 + +nickle (2.37-1) unstable; urgency=low + * Negative left shifts gave off-by-one often (need ceil, not round) + * 30-bit integer add/subtract overflow detection broken. + + -- Keith Packard Thu, 27 May 2004 22:58:14 -0700 + +nickle (2.36-1) unstable; urgency=low + * distinguish between array types of static variables and + initializers within static scope -- dimension storage is different + + -- Keith Packard Wed, 26 May 2004 01:50:58 -0700 + +nickle (2.35-1) unstable; urgency=low + * new string parsing functions added + * fix substr to allow zero-length at end of string + * Change strings to counted to allow embedded nulls + * fix profile tracking code (was generating garbage) + * fix 'make check' to actually fail on error + * Add argument parser library + * Permit for (a; b) to skip initializer + * Compute type of & expressions correctly + * Allow &rvalue and have it automatically box the value + + -- Keith Packard Tue, 25 May 2004 20:32:09 -0700 + +nickle (2.31-1) unstable; urgency=low + * Change resizable array representation to handle shrinking + * Make File::end peek to check + + -- Keith Packard Thu, 15 Apr 2004 22:57:54 -0700 + +nickle (2.30-1) unstable; urgency=low + * Document hashes + * Add unresizable arrays and new resizable array type syntax + * Fix a couple of multi-dimensional array dim ordering bugs + * Add default hash table values + * Oops. Poly couldn't be a ref + + -- Keith Packard Sat, 10 Apr 2004 23:45:56 -0700 + +nickle (2.29-1) unstable; urgency=low + + * Add casts to avoid warnings where sizeof (int) != sizeof (void *) + * Catch File::open_error when loading files and print + reasonable message. Closes: #241417. + * exit(1) immediately if an file or library from the + command line fails load. + + -- Keith Packard Thu, 1 Apr 2004 11:52:51 -0800 + +nickle (2.28-2) unstable; urgency=low + + * Separate build dependencies with commas + + -- Keith Packard Tue, 2 Mar 2004 19:08:52 -0800 + +nickle (2.28-1) unstable; urgency=low + + * Add ilog function (Bart Massey) + + -- Keith Packard Thu, 26 Feb 2004 21:15:05 -0800 + +nickle (2.27-1) unstable; urgency=low + + * Original debian packaging exporting version 2.27. + + -- Keith Packard Sun, 15 Feb 2004 13:56:38 -0800 + --- nickle-2.79.orig/debian/compat +++ nickle-2.79/debian/compat @@ -0,0 +1 @@ +10 --- nickle-2.79.orig/debian/control +++ nickle-2.79/debian/control @@ -0,0 +1,17 @@ +Source: nickle +Section: interpreters +Priority: optional +Maintainer: Keith Packard +Build-Depends: debhelper (>= 10), libreadline-dev, autotools-dev, docbook-utils, bison, flex +Standards-Version: 3.9.8 + +Package: nickle +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: desk calculator language + Nickle is a language with powerful programming and scripting capabilities. + Nickle supports a variety of datatypes, especially arbitrary precision + integers, rationals, and imprecise reals. The input language vaguely + resembles C. Some things in C which do not translate easily are different, + some design choices have been made differently, and a very few features are + simply missing. --- nickle-2.79.orig/debian/copyright +++ nickle-2.79/debian/copyright @@ -0,0 +1,40 @@ +This package was debianized by Keith Packard on 18 Feb 2004. + +Original source can be found at: http://nickle.org + +Upstream Authors: Bart Massey , Keith Packard + +Nickle is distributed under the MIT license: + +Copyright © 1988-2004 Keith Packard and Bart Massey. All Rights Reserved. +Copyright © 2001 Keith Packard and Carl Worth. All Rights Reserved. +Copyright © 2001 Bart Massey. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person +obtaining a copy of this software and associated +documentation files (the "Software"), to deal in the +Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, +sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall +be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE +WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR +PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS +BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the names of the authors +or their institutions shall not be used in advertising or +otherwise to promote the sale, use or other dealings in this +Software without prior written authorization from the +authors. + --- nickle-2.79.orig/debian/lintian.override +++ nickle-2.79/debian/lintian.override @@ -0,0 +1,4 @@ +nickle: extra-license-file usr/share/nickle/examples/smlng/COPYING +nickle: extra-license-file usr/share/nickle/examples/turtle/COPYING +nickle: extra-license-file usr/share/nickle/examples/COPYING +nickle: extra-license-file usr/share/nickle/COPYING --- nickle-2.79.orig/debian/rules +++ nickle-2.79/debian/rules @@ -0,0 +1,26 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +export DH_VERBOSE=1 + +configure_flags = --mandir='$${prefix}/share/man' + +%: + dh $@ --with autotools-dev + +override_dh_auto_configure: + dh_auto_configure -- $(configure_flags) + + +# Don't install duplicate copyright info from COPYING files +# Make examples which happen to start with #! executable + +override_dh_auto_install: + dh_auto_install && (find debian/nickle -name COPYING -print0 | xargs -0 rm) + find debian/nickle/usr/share/nickle -type f -print0 | xargs -0 grep -l '^#!.*nickle' | xargs -d '\n' chmod +x --- nickle-2.79.orig/depcomp +++ nickle-2.79/depcomp @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2005-07-09.11 +scriptversion=2013-05-30.07; # UTC -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999-2014 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,9 +16,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -29,9 +27,9 @@ case $1 in '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] @@ -41,11 +39,11 @@ Environment variables: depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. + tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to . @@ -58,6 +56,66 @@ ;; esac +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 @@ -70,6 +128,9 @@ rm -f "$tmpdepfile" +# Avoid interferences from the environment. +gccflag= dashmflag= + # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case @@ -81,9 +142,32 @@ fi if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc fi case "$depmode" in @@ -91,10 +175,22 @@ ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi @@ -102,13 +198,17 @@ ;; gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then @@ -116,31 +216,31 @@ fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. + # The second -e expression handles DOS-style file names with drive + # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. +## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory +## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as -## well. +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -158,8 +258,7 @@ "$@" -MDupdate "$tmpdepfile" fi stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi @@ -167,99 +266,156 @@ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" - # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the + # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" + make_dummy_depfile fi rm -f "$tmpdepfile" ;; +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the + # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" + set_dir_from "$object" + set_base_from "$object" if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u "$@" -M fi stat=$? - - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat fi - if test $stat -eq 0; then : - else + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi - - if test -f "$tmpdepfile"; then - outname="$stripped.o" - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : + # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi @@ -271,68 +427,141 @@ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + echo >> "$depfile" # make sure the fragment doesn't end with a backslash + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; #nosideeffect) # This comment above is used by automake to tell side-effect @@ -345,13 +574,13 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -371,18 +600,18 @@ done test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' + # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -396,41 +625,51 @@ "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift - cleared=no - for arg in "$@"; do + cleared=no eat=no + for arg + do case $cleared in no) set ""; shift cleared=yes ;; esac + if test $eat = yes; then + eat=no + continue + fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done - obj_suffix="`echo $object | sed 's/^.*\././'`" + obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; @@ -441,13 +680,13 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -466,10 +705,10 @@ esac done - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" @@ -479,35 +718,56 @@ msvisualcpp) # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. + # always write the preprocessed file to stdout. "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + IFS=" " for arg do case "$arg" in + -o) + shift + ;; + $object) + shift + ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; + set fnord "$@" + shift + shift + ;; *) - set fnord "$@" "$arg" - shift - shift - ;; + set fnord "$@" "$arg" + shift + shift + ;; esac done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + none) exec "$@" ;; @@ -526,5 +786,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: --- nickle-2.79.orig/install-sh +++ nickle-2.79/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2005-05-14.22 +scriptversion=2014-09-12.12; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -35,42 +35,57 @@ # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. -# set DOITPROG to echo to test this script +tab=' ' +nl=' +' +IFS=" $tab$nl" + +# Set DOITPROG to "echo" to test this script. + +doit=${DOITPROG-} +doit_exec=${doit:-exec} + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" +posix_mkdir= -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +# Desired mode of installed file. +mode=0755 -chmodcmd="$chmodprog 0755" -chowncmd= chgrpcmd= -stripcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog rmcmd="$rmprog -f" -mvcmd="$mvprog" +stripcmd= + src= dst= dir_arg= -dstarg= -no_target_directory= +dst_arg= + +copy_on_change=false +is_target_a_directory=possibly -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... @@ -80,108 +95,168 @@ In the 4th, create DIRECTORIES. Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG " -while test -n "$1"; do +while test $# -ne 0; do case $1 in - -c) shift - continue;; + -c) ;; - -d) dir_arg=true - shift - continue;; + -C) copy_on_change=true;; + + -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; + shift;; --help) echo "$usage"; exit $?;; - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; + -m) mode=$2 + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; + shift;; + + -s) stripcmd=$stripprog;; + + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done - break;; + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; esac + shift done -if test -z "$1"; then +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi - # It's OK to call `install-sh -d' without argument. + # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi +if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + for src do - # Protect names starting with `-'. + # Protect names problematic for 'test' and other utilities. case $src in - -*) src=./$src ;; + -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. @@ -190,71 +265,173 @@ exit 1 fi - if test -z "$dstarg"; then + if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac + dst=$dst_arg # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi - dst=$dst/`basename "$src"` + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + dstdir=`dirname "$dst"` + test -d "$dstdir" + dstdir_status=$? fi fi - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` - - # Make sure that the destination directory exists. + obsolete_mkdir_used=false - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + # $RANDOM is not portable (e.g. dash); use it when possible to + # lower collision chance + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + + # As "mkdir -p" follows symlinks and we work in /tmp possibly; so + # create the $tmpdir first (and fail if unsuccessful) to make sure + # that nobody tries to guess the $tmpdir name. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null + fi + trap '' 0;; + esac;; + esac - pathcomp= + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + oIFS=$IFS + IFS=/ + set -f + set fnord $dstdir shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit + set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi - pathcomp=$pathcomp/ - done + fi fi if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else - dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ @@ -262,10 +439,9 @@ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -273,51 +449,60 @@ # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } -done + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + set +f && + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: --- nickle-2.79.orig/missing +++ nickle-2.79/missing @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2005-06-08.21 +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -18,9 +17,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -28,63 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: +case $1 in -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to ." exit $? @@ -96,265 +70,146 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar) - shift +# Run the given program, remember its exit status. +"$@"; st=$? - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: --- nickle-2.79.orig/ylwrap +++ nickle-2.79/ylwrap @@ -1,10 +1,9 @@ #! /bin/sh # ylwrap - wrapper for lex/yacc invocations. -scriptversion=2007-11-22.22 +scriptversion=2013-01-12.17; # UTC -# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005, -# 2007 Free Software Foundation, Inc. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. # # Written by Tom Tromey . # @@ -19,9 +18,7 @@ # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -32,9 +29,41 @@ # bugs to or send patches to # . +get_dirname () +{ + case $1 in + */*|*\\*) printf '%s\n' "$1" | sed -e 's|\([\\/]\)[^\\/]*$|\1|';; + # Otherwise, we want the empty string (not "."). + esac +} + +# guard FILE +# ---------- +# The CPP macro used to guard inclusion of FILE. +guard () +{ + printf '%s\n' "$1" \ + | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ + -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g' \ + -e 's/__*/_/g' +} + +# quote_for_sed [STRING] +# ---------------------- +# Return STRING (or stdin) quoted to be used as a sed pattern. +quote_for_sed () +{ + case $# in + 0) cat;; + 1) printf '%s\n' "$1";; + esac \ + | sed -e 's|[][\\.*]|\\&|g' +} + case "$1" in '') - echo "$0: No files given. Try \`$0 --help' for more information." 1>&2 + echo "$0: No files given. Try '$0 --help' for more information." 1>&2 exit 1 ;; --basedir) @@ -67,41 +96,77 @@ # The input. -input="$1" +input=$1 shift -case "$input" in +# We'll later need for a correct munging of "#line" directives. +input_sub_rx=`get_dirname "$input" | quote_for_sed` +case $input in [\\/]* | ?:[\\/]*) # Absolute path; do nothing. ;; *) # Relative path. Make it absolute. - input="`pwd`/$input" + input=`pwd`/$input ;; esac +input_rx=`get_dirname "$input" | quote_for_sed` + +# Since DOS filename conventions don't allow two dots, +# the DOS version of Bison writes out y_tab.c instead of y.tab.c +# and y_tab.h instead of y.tab.h. Test to see if this is the case. +y_tab_nodot=false +if test -f y_tab.c || test -f y_tab.h; then + y_tab_nodot=true +fi + +# The parser itself, the first file, is the destination of the .y.c +# rule in the Makefile. +parser=$1 + +# A sed program to s/FROM/TO/g for all the FROM/TO so that, for +# instance, we rename #include "y.tab.h" into #include "parse.h" +# during the conversion from y.tab.c to parse.c. +sed_fix_filenames= + +# Also rename header guards, as Bison 2.7 for instance uses its header +# guard in its implementation file. +sed_fix_header_guards= -pairlist= -while test "$#" -ne 0; do - if test "$1" = "--"; then +while test $# -ne 0; do + if test x"$1" = x"--"; then shift break fi - pairlist="$pairlist $1" + from=$1 + # Handle y_tab.c and y_tab.h output by DOS + if $y_tab_nodot; then + case $from in + "y.tab.c") from=y_tab.c;; + "y.tab.h") from=y_tab.h;; + esac + fi + shift + to=$1 shift + sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;" + sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;" done # The program to run. -prog="$1" +prog=$1 shift # Make any relative path in $prog absolute. -case "$prog" in +case $prog in [\\/]* | ?:[\\/]*) ;; - *[\\/]*) prog="`pwd`/$prog" ;; + *[\\/]*) prog=`pwd`/$prog ;; esac -# FIXME: add hostname here for parallel makes that run commands on -# other machines. But that might take us over the 14-char limit. dirname=ylwrap$$ -trap "cd '`pwd`'; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15 +do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret' +trap "ret=129; $do_exit" 1 +trap "ret=130; $do_exit" 2 +trap "ret=141; $do_exit" 13 +trap "ret=143; $do_exit" 15 mkdir $dirname || exit 1 cd $dirname @@ -113,98 +178,56 @@ ret=$? if test $ret -eq 0; then - set X $pairlist - shift - first=yes - # Since DOS filename conventions don't allow two dots, - # the DOS version of Bison writes out y_tab.c instead of y.tab.c - # and y_tab.h instead of y.tab.h. Test to see if this is the case. - y_tab_nodot="no" - if test -f y_tab.c || test -f y_tab.h; then - y_tab_nodot="yes" - fi - - # The directory holding the input. - input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'` - # Quote $INPUT_DIR so we can use it in a regexp. - # FIXME: really we should care about more than `.' and `\'. - input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'` - - while test "$#" -ne 0; do - from="$1" - # Handle y_tab.c and y_tab.h output by DOS - if test $y_tab_nodot = "yes"; then - if test $from = "y.tab.c"; then - from="y_tab.c" - else - if test $from = "y.tab.h"; then - from="y_tab.h" - fi - fi - fi + for from in * + do + to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"` if test -f "$from"; then # If $2 is an absolute path name, then just use that, - # otherwise prepend `../'. - case "$2" in - [\\/]* | ?:[\\/]*) target="$2";; - *) target="../$2";; + # otherwise prepend '../'. + case $to in + [\\/]* | ?:[\\/]*) target=$to;; + *) target=../$to;; esac - # We do not want to overwrite a header file if it hasn't - # changed. This avoid useless recompilations. However the - # parser itself (the first file) should always be updated, - # because it is the destination of the .y.c rule in the - # Makefile. Divert the output of all other files to a temporary - # file so we can compare them to existing versions. - if test $first = no; then - realtarget="$target" - target="tmp-`echo $target | sed s/.*[\\/]//g`" + # Do not overwrite unchanged header files to avoid useless + # recompilations. Always update the parser itself: it is the + # destination of the .y.c rule in the Makefile. Divert the + # output of all other files to a temporary file so we can + # compare them to existing versions. + if test $from != $parser; then + realtarget=$target + target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'` fi - # Edit out `#line' or `#' directives. - # - # We don't want the resulting debug information to point at - # an absolute srcdir; it is better for it to just mention the - # .y file with no path. - # - # We want to use the real output file name, not yy.lex.c for - # instance. - # - # We want the include guards to be adjusted too. - FROM=`echo "$from" | sed \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\ - -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'` - TARGET=`echo "$2" | sed \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\ - -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'` - - sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \ - -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$? - - # Check whether header files must be updated. - if test $first = no; then - if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then - echo "$2" is unchanged - rm -f "$target" - else - echo updating "$2" + + # Munge "#line" or "#" directives. Don't let the resulting + # debug information point at an absolute srcdir. Use the real + # output file name, not yy.lex.c for instance. Adjust the + # include guards too. + sed -e "/^#/!b" \ + -e "s|$input_rx|$input_sub_rx|" \ + -e "$sed_fix_filenames" \ + -e "$sed_fix_header_guards" \ + "$from" >"$target" || ret=$? + + # Check whether files must be updated. + if test "$from" != "$parser"; then + if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then + echo "$to is unchanged" + rm -f "$target" + else + echo "updating $to" mv -f "$target" "$realtarget" fi fi else - # A missing file is only an error for the first file. This - # is a blatant hack to let us support using "yacc -d". If -d - # is not specified, we don't want an error when the header - # file is "missing". - if test $first = yes; then + # A missing file is only an error for the parser. This is a + # blatant hack to let us support using "yacc -d". If -d is not + # specified, don't fail when the header file is "missing". + if test "$from" = "$parser"; then ret=1 fi fi - shift - shift - first=no done -else - ret=$? fi # Remove the directory. @@ -219,5 +242,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: