--- mgetty-1.1.36.orig/debian/README.debian +++ mgetty-1.1.36/debian/README.debian @@ -0,0 +1,72 @@ +You can find documentation through + +1. info mgetty + +2. reading/printing the manual in this directory + +The only thing you usually need to do is customize the configuration +files in /etc/mgetty and /etc/inittab. + +Inittab entries +--------------- +You can find examples of inittab entries in: +/usr/share/doc/mgetty/examples/inittab.DEBIAN (provided mgetty-docs is +installed). + +Faxing (if mgetty-fax installed) +-------------------------------- +In order for faxrunqd to be run by /etc/init.d/mgetty-fax, you will need +to specify the port(s) to be used, in /etc/mgetty/faxrunqd.config + +Customize /etc/mgetty/faxheader to have your phone number on all faxes. + +The receiving script is stored as /etc/mgetty/new_fax. It receives four +parameters or more: the hangup code, the remote id, the number of pages, +the file names. + +If you are going to be using sendfax directly, then you'll probably +want to tell it which ports to use in /etc/mgetty/sendfax.config + +-------------------------- +Some modems have a bug wherein they refuse to receive FAXes at any speed +other than 19200 bps. Many modern modems do not have this problem, so the +default behavior of mgetty now is *not* to switch the speed to 19200 bps. + +IF you are having troubles with receiving FAXes, add the following line to +your /etc/mgetty/mgetty.config: + +switchbd 19200 + +This will put you back to the default behavior of mgetty prior to the +release of version 1.1.0-2. + +PAP-Dialup +---------- +mgetty's /etc/mgetty config files are preconfigured to allow easy access +for dialup without a dialin script using PAP authentication. +If you install the pppd package then dialup from Win95 or other compatible +dialers is a snap. See win95.ppp in this directory. + +FIDO EMSI Handling +------------------ +mgetty comes with FIDO support enabled. A sequence of characters is send +before the login prompt to detect and EMSI session and later erased with +backspace. If this causes problems then switch EMSI off in mgetty.config. +This can be done by placing a line "fido-send-emsi n" in /etc/mgetty.config. + +mgetty-voice Documentation and Examples +--------------------------------------- +Can be found under /usr/share/doc/mgetty/voice once mgetty-docs has +been installed. + +Windoze Client +-------------- +There is a W9x/WNT client, which allows you to send faxes from windows +to a server running mgetty, to be faxed: + + http://www.itex.co.za/mgetty + + +Philip Hands +Christoph Lameter +John Goerzen --- mgetty-1.1.36.orig/debian/TODO +++ mgetty-1.1.36/debian/TODO @@ -0,0 +1,16 @@ +This file notes what should be done (and what warnings we currently accept) +for the Debian package. + +The current tree of example files should be re-visited and re-packaged. +The goal is to throw all working-and-not-deprecated files at a script place, +and mark all other as not working. However, the way to do this is to first +create a scripting system, and then (as the next step) re-visit the scripts. +So we ignore linda/lintian warnings and errors about the example scripts at +the moment. + +We also need an rewrite of the upstream make system. This is on the way. +So, if something is more or less an aesthetical problem, we ignore it if +if needs changes in debian/rules. We'll do that direct after the +implementation of the new makefiles. + +Andreas Barth, 2003-09-28 --- mgetty-1.1.36.orig/debian/changelog +++ mgetty-1.1.36/debian/changelog @@ -0,0 +1,1025 @@ +mgetty (1.1.36-3) unstable; urgency=medium + + * Add build-arch and build-indep targets in debian/rules. Closes: #822056 + * Replace the list of 64-bit architectures by __LP64__. Closes: #775518 + Thanks to James Cowgill for the fix. + * Add debian/watch with signatures. Closes: #747491 + Thanks to David Gilman. + * Add pt_BR translation. Closes: #795379 + Thanks to Eder L. Marques. + + -- Andreas Barth Fri, 08 Jul 2016 14:45:43 +0200 + +mgetty (1.1.36-2.1) unstable; urgency=medium + + * Non-maintainer upload. + * Add arm64 to the list of 64-bit architectures. Closes: #764924 + + -- Peter Michael Green Sun, 12 Oct 2014 02:09:38 +0000 + +mgetty (1.1.36-2) unstable; urgency=medium + + * Don't ship folders within /var/run or /var/lock anymore. Closes: #689899 + * fix FTBFS with perl 5.18. Closes: #719501 + * faxspool: convert pdf file directly with ghostscript + + -- Andreas Barth Wed, 15 Jan 2014 20:58:29 +0000 + +mgetty (1.1.36-1.6) unstable; urgency=low + + * Non-maintainer upload. + * Bump debhelper compatibility to 7 + * As a consequence, replace "dh_clean -k" calls by "dh_prep" + * Add ${misc:Depends} to packages dependencies to properly insert + dependencies implied by the use of debhelper + * Depend on "dpkg (>= 1.15.4) | install-info" for install-info + transition + * Remove empty mgetty-docs.{postinst|prerm} files + * Fix pending l10n issues. Debconf translations: + - Finnish (Esko Arajärvi). Closes: #536518 + + -- Christian Perrier Sat, 20 Mar 2010 17:22:11 +0100 + +mgetty (1.1.36-1.5) unstable; urgency=low + + * Non-maintainer upload. + * Fix pending l10n issues. Debconf translations: + - Russian. Closes: #494718 + - Spanish. Closes: #501805 + - Basque. Closes: #503226 + + -- Christian Perrier Mon, 27 Oct 2008 06:15:19 +0100 + +mgetty (1.1.36-1.4) unstable; urgency=low + + * Non-maintainer upload. + * Update debian/patches/78-insecure-tmp-usage to not create the spool + directory already created by mktemp (Closes: #498705). + + -- Nico Golde Sat, 13 Sep 2008 16:33:39 +0200 + +mgetty (1.1.36-1.3) unstable; urgency=high + + * Non-maintainer upload by the Security Team. + * Fix insecure use of temporary file names that could lead to a symlink + attack. + (debian/patches/78-insecure-tmp-usage; No CVE id yet; Closes: #496403) + + -- Nico Golde Fri, 05 Sep 2008 17:52:42 +0200 + +mgetty (1.1.36-1.2) unstable; urgency=medium + + * Non-maintainer upload. + * Fix bashism in debian/rules (Closes: #484406) + * debian/control: + - Bump Standards-Version to 3.8.0. + - Use new upstream URL in Homepage field, remove old URL from long + description. + - Use ${binary:Version} relations instead of deprecated ${Source-Version}. + - Replace numerous dependencies on gs-* with ghostscript. + - Replace tetex-bin Build-Depends with texlive. + - Remove xlibs-dev from Build-Depends. + * Replace deprecated "user.group" usage of chown in mgetty-voice.postinst. + + -- Chris Lamb Sat, 12 Jul 2008 01:12:21 +0100 + +mgetty (1.1.36-1.1) unstable; urgency=low + + * Non-maintainer upload to solve release goal. + * Add LSB dependency header to init.d scripts (Closes: #464067). + * Create /var/run/mgetty-fax and /var/lock/fax if necessary + (Closes: #456986). Patch from Scott James Remnant and Ubuntu. + * Added debconf translation for Italian from Luca Monducci + (Closes: #456553). + * Add po-debconf as build-depend as suggested by lintian. + + -- Petter Reinholdtsen Fri, 28 Mar 2008 11:56:49 +0100 + +mgetty (1.1.36-1) unstable; urgency=low + + * New Upstream version, adjust patches (and patch 62 is upstream now). + * Dropping woody compatibility hack for po-debconf, and run + debconf-updatepo in clean. Thanks, Christian Perrier. Closes: #412350 + * Fix fax-by-lpr.txt - use /var/spool instead of /usr/spool. + Closes: #432080 + * l10n: + - Add gl. Thanks, Jacobo Tarrio. Closes: #412675 + - Fix filename of pt. + + -- Andreas Barth Mon, 13 Aug 2007 10:35:35 +0000 + +mgetty (1.1.35-3) unstable; urgency=low + + * remove /var/spool/fax on purge. Closes: #382777 + * remove the useless debian/mgetty-viewfax.postrm. + * drop the old text about new security schema in Sarge. Closes: #388933 + * add l10n: nl, pt. Closes: #366718, #410127 + * replace dependency on mime-encodings by usage of perl. Thanks, Manoj + for the suggestion. And perl is so common we can safely depend on. + Closes: #376906, #309038 + + -- Andreas Barth Sun, 18 Feb 2007 10:13:50 +0000 + +mgetty (1.1.35-2) unstable; urgency=low + + * fix faxrunq script. Closes: #363691 + * fix override disparity. Closes: #363026 + + -- Andreas Barth Thu, 20 Apr 2006 23:44:40 +0200 + +mgetty (1.1.35-1) unstable; urgency=low + + * Catch up with upstream: + - acct.log massively overhauled + - first support for class 1 modems (not enabled however) + * Clean out faxqueue on purge. Closes: #332496 + * more i18n: Vietnamese, Czech, Danish, Swedish. + Closes: #312771, #311981, #319021, #334140, #335351 + * Disable messages in pvftowav. Closes: #344165 + * debhelper level 4. + * Fix FTBFS on kFreeBSD. Closes: #347549 + + -- Andreas Barth Sun, 16 Apr 2006 21:46:25 +0200 + +mgetty (1.1.33-3) unstable; urgency=low + + * depend on debconf | debconf-2.0 + + -- Andreas Barth Sat, 13 Aug 2005 10:32:37 +0200 + +mgetty (1.1.33-2) unstable; urgency=medium + + * faxspool: -u is also honoured for lp and daemon. Closes: #307964 + * log the submitter to acct.log. Closes: #307969 + + -- Andreas Barth Tue, 10 May 2005 20:28:24 +0000 + +mgetty (1.1.33-1) unstable; urgency=high + + * new upstream release + + can send out multi-page faxes again. + + detect the MT5634ZPX-PCI*-variants. Closes: #287289 + + -- Andreas Barth Mon, 11 Apr 2005 09:20:30 +0000 + +mgetty (1.1.32-2) unstable; urgency=medium + + * debian's patches to faxrunqd can cope with "use strict" + + -- Andreas Barth Wed, 30 Mar 2005 20:23:15 +0200 + +mgetty (1.1.32-1) unstable; urgency=medium + + * new upstream release. + + new version of faxview, fixes segfault. Closes: #245719 + * added Czech, Danish and Japanese translation. + Closes: #258696, #261792, #269307. + * fixed vgettys location in the man page. Closes: #290710 + + -- Andreas Barth Wed, 23 Mar 2005 00:03:54 +0100 + +mgetty (1.1.31-1) unstable; urgency=low + + * new upstream release. + + added sff2g3 + + moved some patches from debian to upstream + + Add support for Lucent Venus v.90. Closes: #254404 + * typo in README.Debian. Closes: #256937 + * updated the french docu, added german. Closes: #247378 + * corrected comaintainers email + * depend on libx11-dev instead of xlibs-dev + + -- Andreas Barth Sun, 25 Jul 2004 10:52:08 +0200 + +mgetty (1.1.30-10) unstable; urgency=low + + * adjusted so that updates from woody don't fall at the first try. + Closes: #246328 + * french translation update. Closes: #246199 + + -- Andreas Barth Wed, 28 Apr 2004 23:03:24 +0200 + +mgetty (1.1.30-9) unstable; urgency=low + + * use appropriate sigs in /etc/init.d; this could also mean a delay + at shutdown of the system. Closes: #235196 + * Using gettext-based debconf templates in the woody-compatible way. + Closes: #235813 + * provide man pages for vm and newslock (and move newslock to -fax). + Closes: #200418 + * use dpatch instead of classic patch files + * bump version to 3.6.1.0 (no changes needed) + + -- Andreas Barth Fri, 9 Apr 2004 20:28:26 +0200 + +mgetty (1.1.30-8) unstable; urgency=low + + * now users can have default coverpages and faxheaders + * help is now available in viewfax. Closes: #228440 + + -- Andreas Barth Fri, 23 Jan 2004 19:49:16 +0100 + +mgetty (1.1.30-7) unstable; urgency=low + + * make.coverpg is now in /etc. Closes: #28716 + * Enhanced and reworked the descriptions of all packages. Closes: #210021 + * Starting to use NEWS.Debian, and so upgraded debhelper to 4.1.51. + * again moved patches from and to upstream; this is now almost 1.1.31. + * build all with -g, as upstream does. + * another fix for Lucent chipsets. Closes: #216573 + * mgetty.info is now in package mgetty. + * removed debian/watch; we don't need it. + * login.config, mgetty.config, dialin.config, faxheader, faxrunq.config, + sendfax.config and voice.conf are not longer conffiles + + -- Andreas Barth Wed, 31 Dec 2003 22:33:44 +0100 + +mgetty (1.1.30-6) unstable; urgency=low + + * New maintainer team; we approve our own NMU of course. + * packages mostly linda/lintian clean, except causes given in debian/TODO + * updated to the most current upstream pre-version + * moved patches from and to upstream; removed now included patches and + one irrelevant one (suppression of action names in caller id strings) + * added fix for voice on Zoom 2949C / 2949L. Closes: #209140, #210465 + * show also time at faxq. Closes: #209230 + * removed recommendation on metamail. Closes: #212346 + * fixed pid-file-path in mgetty-fax's init.d. Closes: #214479 + + -- Andreas Barth Wed, 8 Oct 2003 20:01:01 +0200 + +mgetty (1.1.30-5.1) unstable; urgency=low + + * NMU under the "we want sarge RSN"-policy, see + http://lists.debian.org/debian-devel-announce/2003/debian-devel-announce-200308/msg00010.html + * mgetty: removes old log rotation in /etc/cron.daily/mgetty in postinst + (Closes: #202759) + * mgetty-fax: fixed permissions problem the way upstream recommends + (Closes: #201681) + * FTBFS fix (Closes: #201675) + * removed executable-bit from documentation + * removed leftovers from patches. + + -- Andreas Barth Fri, 25 Jul 2003 10:35:34 +0200 + +mgetty (1.1.30-5) unstable; urgency=low + + * mgetty-fax: fix mgetty-fax.prerm to remove hidden files properly by testing for + "remove" instead of "purge". + * mgetty-fax: Reference faxrunq.config instead of faxrunqd.config in init script. + * mgetty-fax: faxrunqd's now runs as uucp most of the time but regains + and drops root priviledges as needed for logfile handling. Logfiles + are owned by root.adm and created with 0640 permissions. (Closes: #201282) + * mgetty-fax: Put faxrunqd's pidfile back into /var/run. + * mgetty-fax: faxrunqd now accepts -D and -g correctly. (Closes: #200815) + * mgetty-fax: faxrunqd accepts both ids and user-/groupnames as + parameters to -u and -g. (Thanks to Andreas Barth ) + * mgetty-fax: faxrunqd takes 7 logfiles into account when SIGUSR1 is + caught (instead of 3). + * mgetty-fax: faxrunqd does not display anything when SIGUSR2 (graceful + exit) is caught. This happens when "/etc/init.d/mgetty-fax stop" is + invoked. + * mgetty-fax: remove "-e" from init script execution since it is useless + and causes the configuration process to die when faxrunq.config is not + configured. + + -- Wolfgang Sourdeau Tue, 15 Jul 2003 16:10:15 -0400 + +mgetty (1.1.30-4) unstable; urgency=low + + * New patch to create correct info section information from doc/mgetty.texi. + * Fix permissions for the new security scheme of mgetty-fax. Notify the + administrator about those changes during postinst. (Closes: #195179) + * Ensure correct permissions are set during execution of the postinst + script of mgetty-voice since we messed them up with the last release. + + -- Wolfgang Sourdeau Tue, 8 Jul 2003 01:31:00 -0400 + +mgetty (1.1.30-3) unstable; urgency=low + + * Override permissions of /usr/lib/mgetty-fax/faxq-helper, /var/lock/fax + and /var/spool/fax/outgoing with dpkg-statoverride. + * /etc/mgetty/faxrunqd_should_not_be_run renamed to + faxrunqd_should_not_be_run to hide it. Removed during prerm phase of + mgetty-fax. + + -- Wolfgang Sourdeau Fri, 4 Jul 2003 11:34:15 -0400 + +mgetty (1.1.30-2) unstable; urgency=low + + * Fixed some package descriptions. + * Install faxrunqd back into /usr/sbin/. + * Documentation for /etc/issue updated. Thanks to Andreas Barth + . (Closes: #72269) + * Adapted faxrunq.conf to give example paths more compliant with the FHS. + * Remove useless warning from mgetty-fax.init.d. Make the start of + faxrunqd an installation option with debconf. (Closes: #68714) + * mgetty-fax now depends on debconf. Dependency on gs OR'd with + gs-aladdin and gs-esp for completion. + * Standards version set to 3.5.8 in debian/control. + * Permissions of binaries and directories set with post-installation + scripts instead of from debian/rules. + * README.Debian more accurate regarding /etc/mgetty/new_fax. (Closes: #197966) + * Obsolete bug reports. (Closes: #13540, #22156) + * Useless bug report. (Closes: #191623) + * Documentation fix. (Closes: #191525) + * Do not provide cron scripts anymore. Depends on logrotate instead. + (Closes: #127304) + * Merge of debian/postinst with debian/mgetty.postinst. + * Produce better tiff files. (Closes: #86917) + * New security scheme. Old bug closed. Security enhancements correctly + adapted to Debian. (Closes: #11478, #195179) + + -- Wolfgang Sourdeau Tue, 1 Jul 2003 23:55:30 -0400 + +mgetty (1.1.30-1) unstable; urgency=low + + * New upstream release. + * Close this. (Closes: #170304) + * New modems: GVC MD 0340 and Multitech's MT5634ZBAV-V92. (Closes: #175498, #182923) + + -- Wolfgang Sourdeau Mon, 28 Apr 2003 00:20:04 -0400 + +mgetty (1.1.28-5) unstable; urgency=low + + * mgetty-fax: stupid typo, be burning in hell! (Closes: #171251) + + -- Wolfgang Sourdeau Sun, 1 Dec 2002 10:08:48 -0500 + +mgetty (1.1.28-4) unstable; urgency=low + + * This bug seems to have disappeared since 1.1.18. Reopen if needed + (Closes: #32808) + * mgetty-fax: erase /var/spool/fax/outgoing/.last_run when purging. + (Closes: #94283) + * No answer, seems to no more happen anyway. Reopen if needed + (Closes: #105459) + * Fix put in patch #12. Do not output anything when catching TERM or + HUP. (Closes: #139907) + * Patch #44: unclear char signedness fixed in faxinput.c. + (Closes: #169455) + * mgetty-fax: prerm/postrm running with '-e'. + * Patch #45: removed references to deprecated variables sys_nerr and + sys_errlist, using strerror instead. + + -- Wolfgang Sourdeau Wed, 27 Nov 2002 19:13:52 -0500 + +mgetty (1.1.28-3) unstable; urgency=low + + * faxspool now accepts parameters with spaces. (Closes: 70081) + * This does not seem to happen anymore. (Closes: #93762) + * This bug does not occur anymore with recent versions of KDE. + (Closes: #101750) + * Recognize CallerID info from gsm modems. Thanks to Erwan MAS + for his patch. (Closes: #112163) + * Fixes related to CallerID info handling. Thanks to Paul Miller + for his patch. (Closes: #128668) + * /bin/bash used to execute shell scripts. (Closes: #149851) + * Support for another Zoom modem software revision. Thanks to Jim + Winstead for his patch. (Closes: #156106) + * Stop faxrunqd gracefully. (Closes: #156665) + + -- Wolfgang Sourdeau Mon, 28 Oct 2002 01:11:56 -0500 + +mgetty (1.1.28-2) unstable; urgency=low + + * Slightly optimized debian/rules with make tricks. + * mgetty-viewfax: viewfax.tif goes into /usr/share/doc/mgetty-viewfax/ + since it's part of the documentation. + * mgetty-docs: both PS and HTML documentation is provided, texinfo is + kept if people need it (Closes: #47086) + * mgetty-fax: this feature has been supported in recent versions + (Closes: #60866) + * Viewfax's buffer run fixed in upstream 2.5 (Closes: #69971, #69974) + * mgetty-fax: this bug should not occur with current Perl 5.6.1. Reopen + if *really* needed (Closes: #77327) + * mgetty-fax: mime info provided, optional handling of unconverted g3 + files provided in new_fax (Closes: #135277) + * mgetty-fax: stupid typo fixed now (Closes: #152246) + * mgetty: Respect Debian lock file standard naming + convention. (Closes: #153394) + + -- Wolfgang Sourdeau Sat, 3 Aug 2002 17:26:56 -0400 + +mgetty (1.1.28-1) unstable; urgency=low + + * New Upstream Release. + * confirm bug close from NMU. (Closes: #140179) + * Splitted the main patch and put the resulting patches in + debian/patches for easier handling. The resulting diff should only + contain the Debian subdirectory now. Added "patch" as a + build-dependency. + * mgetty-fax: logs go into /var/log/mgetty. + * Depends on gs only (the gs-compatible packages should provide 'gs'). + * Do not depend on perl5 anymore. Do not depend on perl at all since + perl-base should provide everything required. + + -- Wolfgang Sourdeau Tue, 30 Jul 2002 04:23:29 -0400 + +mgetty (1.1.27-4.1) unstable; urgency=high + + * debian/rules: + - Install login.config with mode 600 instead of 644 (Closes: #140179) + + -- Colin Walters Thu, 4 Apr 2002 23:18:06 -0500 + +mgetty (1.1.27-4) unstable; urgency=low + + * Fix spelling error in description for mgetty-docs. (Closes: #125130) + * Fix implicit declarations during compilation. (Closes: #125385) + * mgetty-pvftools: new package containing the pvftools stripped from the + mgetty-voice package. + * Put voice/ChangeLog into /usr/share/doc/mgetty/ChangeLog.voice. + + -- Wolfgang Sourdeau Mon, 17 Dec 2001 22:03:32 -0500 + +mgetty (1.1.27-3) unstable; urgency=low + + * mgetty-voice: do not put value for voice_shell_log between quotes in + /etc/mgetty/voice.conf (Closes: #120456) + + -- Wolfgang Sourdeau Thu, 22 Nov 2001 22:07:15 -0500 + +mgetty (1.1.27-2) unstable; urgency=low + + * mgetty-fax: fixes a security hole in /etc/mgetty/new_fax and depends + on debianutils (>= 1.6) for /bin/tempfile. (Closes: #111271) + * Depends on either gs or gs-aladdin. (Closes: #93640) + + -- Wolfgang Sourdeau Tue, 20 Nov 2001 06:01:17 -0500 + +mgetty (1.1.27-1) unstable; urgency=low + + * New Upstream Release. + + -- Wolfgang Sourdeau Tue, 20 Nov 2001 05:24:31 -0500 + +mgetty (1.1.26-4) unstable; urgency=low + + * faxrunqd doesn't automatically start as a daemon. (Closes: #115187) + * Bug fixed in NMU's (Closes: #36965, #56446, #70741, #46315, #50173, + #67453, #87922, #94689, #41874) + + -- Wolfgang Sourdeau Wed, 10 Oct 2001 23:43:23 -0400 + +mgetty (1.1.26-3) unstable; urgency=low + + * Don't exit with code != 0 if info documentation is not found. + (Closes: 114942, 114612) + + -- Wolfgang Sourdeau Wed, 10 Oct 2001 02:51:01 -0400 + +mgetty (1.1.26-2) unstable; urgency=low + + * New Maintainer. + * Bug fix in the daily cronjob which could cause severe disk consumption + under certain circumstances. (Closes: #75140, #74995) + * 1.1.26 does build on ia64. (Closes: #104828, #105089) + * Doc fix. (Closes: #46214, #47514) + * Suggests gs but do not depend on it (Closes: #69340) + * Obsolete bugs. (Closes: #54218, #88900, #36965, #56446, #111205, + #81521, #111170, #38918, #47705, #27336) + + -- Wolfgang Sourdeau Fri, 5 Oct 2001 03:48:39 -0400 + +mgetty (1.1.26-1.1) unstable; urgency=low + + * NMU. + * Added build-dependency on xlibs-dev, groff. (Closes: #111205) + * Removed "-g" from CFLAGS in g3/Makefile. + * Put custom header files (policy.h, voice-defs.h) in debian/. + * mgetty.info is now put in /usr/share/info instead of /usr/info/. + * mgetty-docs.postrm to mgetty-docs.prerm (for uninstalling mgetty.info at + the correct time). + * /etc/mgetty/login.config chmod'd to 0644. + * /var/spool/fax/outgoing, /var/lock/fax, + /var/spool/voice/{incoming,messages} chmod'd to 2775. + + -- Wolfgang Sourdeau Fri, 7 Sep 2001 04:44:53 -0400 + +mgetty (1.1.26-1) unstable; urgency=low + + * NMU. + * Updated to version 1.1.26. (Closes: #41874, #46315, #50173, #67453, #69971, #69974, #81521, #87922, #94689) + * Missing manpages are marked as undocumented (debian/rules). + * .o files from the viewfax contributed package are not installed anymore. + * Removed references to dh_suidregister (debian/rules). + * mgetty.asc and mgetty.ms are not generated since texi2roff is not + packaged for Debian. + * added dependencies on debhelper, texi2html, texinfo, tetex-bin. + * removed "-g" from CFLAGS in certain Makefiles. + + -- Wolfgang Sourdeau Sun, 2 Sep 2001 19:30:53 -0400 + +mgetty (1.1.21-3.1) unstable; urgency=low + + * Non-maintainer upload. + * Changed chown invocation in debian/rules to fix build. + * Rebuilt on and for upload to sid. (Closes: #80640) + + -- Robert McQueen Thu, 25 Jan 2001 22:48:15 +0000 + +mgetty (1.1.21-3potato1) stable; urgency=high + + * SECURITY: fix for insecure tempfile handling + * disables fall-back delivery to /tmp + + -- Michael Stone Mon, 8 Jan 2001 23:03:10 -0500 + +mgetty (1.1.21-3) stable; urgency=low + + * make mgetty-fax's postinst create /var/spool/fax/outgoing/.last_run + to close a potential symlink exploit by members of the fax group + that is otherwise possible until that file is created + + -- Philip Hands Thu, 31 Aug 2000 19:05:13 +0100 + +mgetty (1.1.21-2.1) frozen unstable; urgency=medium + + * Fixes new_fax file issue (Closes: #56446) + * NMU + + -- Ivan E. Moore II Mon, 14 Feb 2000 12:15:10 -0700 + +mgetty (1.1.21-2) unstable; urgency=medium + + * add test in prerm to work round old prerm problem (really closes: 47439) + + -- Philip Hands Mon, 1 Nov 1999 12:14:10 +0000 + +mgetty (1.1.21-1.1) unstable; urgency=low + + * Non-maintainer upload + * Add --oknodo to init.d script so we don't fail miserably during + package removal. Closes: 47439 + + -- Wichert Akkerman Sat, 30 Oct 1999 20:25:22 +0200 + +mgetty (1.1.21-1) unstable; urgency=low + + * New upstream release (closes: #41871, #41873, #41872) + * make cron.daily's execution conditional (closes: #34034) + * eliminate globbing in debhelper calls (closes: #32028) + * use new_fax.mime4 as the default new_fax (closes: #35984, #32545, #29117) + * move /usr/lib/mgetty+sendfax to /usr/lib/mgetty-fax + * document faxrunqd's options (closes: #31524) + * move fax receipt bits into mgetty (closes: #32020) + * add -D (daemon mode) option to faxrunqd + * move to using /usr/share/... for docs. + + -- Philip Hands Sun, 26 Sep 1999 17:59:25 +0100 + +mgetty (1.1.20-1) unstable; urgency=low + + * New upstream release + * move most of mgetty-docs to /usr/doc/mgetty + + -- Philip Hands Sat, 3 Apr 1999 20:53:24 +0100 + +mgetty (1.1.18-2) unstable; urgency=low + + * add /var/spool/fax/incoming directory to mgetty-fax + (closes: #25466, #24973) + * use giftopnm in faxspool (closes: #22135) + * add mgetty-fax dependency for ``gs'' (closes: #27336) + * include docs from voice section in mgetty-docs (closes: #27718) + + -- Philip Hands Thu, 19 Nov 1998 14:48:15 +0000 + +mgetty (1.1.18-1) unstable; urgency=low + + * New upstream release + + -- Philip Hands Mon, 28 Sep 1998 19:41:00 +0100 + +mgetty (1.1.17-1) unstable; urgency=low + + * New upstream release + * add mgetty-docs.post{inst,rm} to call install-info (closes: #22448) + * fix /FIDO/ entry in login.config to work with ifcico (closes: #24550) + * enable dialin.conf Caller ID (closes: #23652) + + -- Philip Hands Wed, 26 Aug 1998 18:17:31 +0100 + +mgetty (1.1.16-1) unstable; urgency=low + + * New upstream release + + -- Philip Hands Tue, 4 Aug 1998 10:44:33 +0100 + +mgetty (1.1.14-4) unstable; urgency=low + + * Fix several documentation/script mistakes pointed out by The Man + Himself -- Gert Doering. + + -- Philip Hands Fri, 19 Jun 1998 22:48:48 +0100 + +mgetty (1.1.14-3) unstable; urgency=low + + * fix debian/rules so the it does not refer to arch indep stuff in the + arch dep section (closes: #22800, #22539) + * fix g32pbm reference in new_fax (closes: #22615) + * recompile after installing makeinfo (closes: #22448) + + -- Philip Hands Fri, 15 May 1998 01:14:41 +0100 + +mgetty (1.1.14-2) frozen unstable; urgency=low + + * fix faxspool locking problem (# 9273) + + -- Philip Hands Fri, 15 May 1998 01:14:41 +0100 + +mgetty (1.1.14-1) frozen unstable; urgency=low + + * New upstream release + * Add CONFDIR= bit to make install in debian/rules (closes: #20922) + * move over to debhelper + * stop postinst editing /etc/crontab & /etc/inittab (closes: #20651) + * include magic files in /usr/doc/ (closes: #13183) + * build mgetty-docs in binary-indep (closes: #16693) + * fix FIDO line in /etc/mgetty/login.config (closes: #21031) + + -- Philip Hands Fri, 3 Apr 1998 10:27:11 +0100 + +mgetty (1.1.12-1) unstable; urgency=low + + * New upstream release + * recompiling seems to have fixed the sendfax segfault problem. + (closes: #17825, #18209, #16684) + * split viewfax out into mgetty-viewfax (closes: #18194) + * exclude .bz2 files from savelog in cron.daily (closes: #16463) + + -- Philip Hands Fri, 6 Feb 1998 09:45:05 +0000 + +mgetty (1.1.9-3) unstable; urgency=low + + * ensure HAVE_SIGINTERRUPT gets defined for glibc2, which should stop + lockups apparently caused by changes to signal()'s behaviour. + + -- Philip Hands Sat, 29 Nov 1997 14:30:41 +0000 + +mgetty (1.1.9-2) unstable; urgency=low + + * Include man1/mgetty-fax.1 in mgetty-fax (was in mgetty-voice briefly) + * get rid of viewfax stuff mistakenly included in mgetty-docs (fixes: #11475) + * make faxrunqd a conffile (fixes #11476) + * fix paths in faxrunqd (fixes: #11477,#12057) + + -- Philip Hands Wed, 26 Nov 1997 23:44:57 +0000 + +mgetty (1.1.9-1) unstable; urgency=low + + * New upstream release + * add cron scripts to conffiles (#7384) + * fix permissions on some doc files (#11285) + * fix permissions for /var/spool/fax/outgoing/locks (#11466) + + -- Philip Hands Mon, 3 Nov 1997 18:02:06 +0000 + +mgetty (1.1.8-1) stable; urgency=medium + + * New maintainer + * New upstream release (fixes ``become root'' security bug in scripts) + * #11488 Fix bug in /etc/cron.daily/mgetty (postinst tidies up after this) + * compiled with libc5 (so it can go into bo) + + -- Philip Hands Thu, 31 Jul 1997 11:42:21 +0100 + +mgetty (1.1.7-3) unstable; urgency=low + + * fixed it. :) recompiled with libc6 + + -- Paul Haggart Sat, 21 Jun 1997 19:58:16 -0400 + +mgetty (1.1.7-2) unstable; urgency=low + + * forced into libc5 until I get around to fixing it + * fax.1 manpage renamed to mgetty-fax.1 + * policy.h: init string changed to "AT" + + -- Paul Haggart Thu, 12 Jun 1997 15:10:05 -0400 + +mgetty (1.1.7-1) unstable; urgency=low + + * new maintainer + * new upstream release + * mgetty-voice added + * policy.h, voice/include/paths.h: all log files generated by {m,v}getty + are now located in /var/log/mgetty/* + * policy.h: logging to syslog enabled + * policy.h: mgetty uses /usr/sbin/sendmail instead of /usr/lib + + -- Paul Haggart Mon, 9 Jun 1997 18:22:44 -0400 + +mgetty (1.1.2-1) unstable; urgency=low + + * New upstream release + * Upgraded from debmake 2.72 to debmake 3.2.1 + * Closed bug reports filed against an older mgetty that have already + been fixed: + * #7426 (/var/log/mgetty) + * #7497 (permissions) + * #7724 (permissions) + (fixed permissions on /etc/mgetty/login.config, also mentioned + in this one) + * #7745 (permissions) + * Now only suggests (instead of reccommends) mgetty-fax; closes + bug #7700 + * Closed bug #7498. I agree with the upstream author that a modification + to PATH is good, but I have changed it to insert the extra directory + *after* the user's PATH variable instead of before it. + + -- John Goerzen Sun, 2 Mar 1997 17:03:06 -0600 + +mgetty (1.1.1-1) unstable; urgency=low + + * New upstream release + * Bug against previous releases of mgetty closed: + #7213 + * Fixed permissions on /var/spool/fax/outgoing/locks (fixing bug #7231) + and /var/spool/fax/outgoing + * Daily cron scripts now listed as conffiles (fixes bug #7384) + + -- John Goerzen Fri, 14 Feb 1997 21:20:03 -0600 + +mgetty (1.1.0-2) unstable; urgency=low + + * Added info to README.debian explicitly spelling out how to disable + EMSI. + * Added symlinks from /usr/doc/mgetty-docs and /usr/doc/mgetty-fax to + the mgetty directory, fixing bugs #6305, #6363 + * Bug #6662 has already been fixed in version 0.99.8-2; now closing it. + * Bug #6112 closed: maintainer cannot duplicate it and the submittor + hasn't responded to request for more information. If the submittor + (or anyone else) can duplicate it, please send another report to + submit@bugs.debian.org and open a new report. + * Changed FAXREC_FLOW from FLOW_SOFT to FLOW_BOTH + * Changed FAXSEND_FLOW from FLOW_SOFT to FLOW_BOTH + * Now compiled by default to **NOT** switch port speed on FAX receive. + Added documentation to README.debian explaining how to set it up + to revert to the old default behavior. + * Bug #6873 closed -- /var/log/mgetty *does* exist and maintainer + cannot duplicate the problem. Submittor of the bug did not elaborate + on problem upon request. Bug will be re-openened if submittor will + provide contact me. + * Bug #6897 closed -- apparently the problem is the cable and/or + the Mac. + + -- John Goerzen Wed, 29 Jan 1997 22:36:51 -0600 + +mgetty (1.1.0-1) unstable; urgency=low + + * Some fixes to the source package; fixes bug #6817 + * New upstream release + + -- John Goerzen Fri, 24 Jan 1997 01:17:30 -0600 + +mgetty (1.0.0-3) stable unstable; urgency=low + + * Updated the copyright file to reflect the latest copyright/license + * Upon feedback from previous maintainer , reverted + to previous directory scheme even though ``dpkg-source -x'' cannot (yet) + properly unpack it. (This particular change has no effect on users + using only the binary package.) + [there are some directories created beneath the debian directory + in the source package] + + -- John Goerzen Sat, 18 Jan 1997 00:35:50 -0600 + +mgetty (1.0.0-2) stable unstable; urgency=low + + * New maintainer: John Goerzen + * Now makes a valid source-package -- no extra directories created + Also hacked to work with debstd + * Minor modifications to various files in debian directory + + -- John Goerzen Fri, 17 Jan 1997 04:04:20 -0600 + +mgetty (1.0.0-1) stable unstable; urgency=low + + * New upstream non-beta release. Voice Part removed since considered unstable + + -- Christoph Lameter Mon, 13 Jan 1997 21:08:12 -0800 + +mgetty (0.99.9-2) unstable; urgency=low + + * mgetty-fax: rotate sendfax.log weekly. + + -- Christoph Lameter Fri, 10 Jan 1997 08:39:00 -0800 + +mgetty (0.99.9-1) unstable; urgency=low + + * /etc/mgetty/new_fax supplied instead of it being a symlink + * allow installation of pbm supplements again since names do not conflict + anymore with netbpm. + * New upstream release + + -- Christoph Lameter Sun, 5 Jan 1997 20:35:21 -0800 + +mgetty (0.99.8-2) unstable; urgency=low + + * /etc/mgetty/new_fax made a conffile + * debian/watch file supplied + + -- Christoph Lameter Wed, 25 Dec 1996 14:13:19 -0800 + +mgetty (0.99.8-1) stable unstable; urgency=low + + * Upstream update + + -- Christoph Lameter Tue, 24 Dec 1996 19:34:34 -0800 + +mgetty (0.99.7-1) stable unstable; urgency=low + + * Changelog renamed to changelog.upstream + * Upstream update. Newest Standards. + * mgetty-fax: depend on netpbm + * mgetty-fax: do not install /usr/bin/g3topbm and pbmtog3 + * mgetty-fax: remove diversions that made g3topbm/pbmtog3 unusable if + netpbm not installed. + + -- Christoph Lameter Thu, 19 Dec 1996 13:24:08 -0800 + +mgetty (0.99.6-1) unstable; urgency=low + + * New upstream release. Note that mgetty contains FIDO dialin support since + 0.99.3-2 + + -- Christoph Lameter Sat, 7 Dec 1996 11:09:09 -0800 + +mgetty (0.99.4-1) unstable; urgency=low + + * New upstream release + + -- Christoph Lameter Tue, 19 Nov 1996 19:07:01 -0800 + +mgetty (0.99.3-2) unstable; urgency=low + + * FIDO support enabled. New directive in mgetty.config (patch from Author) + which controls the sending of the EMSI string. On by default. + Switch it off if you get into problems with ppp connections and have + users complain about strange things on the screen. + * policy.h was doubled in last release ?? + + -- Christoph Lameter Fri, 8 Nov 1996 10:19:06 -0800 + +mgetty (0.99.3-1) unstable; urgency=low + + * allow mgetty-fax to depend on X libraries. + * upstream update + + -- Christoph Lameter Thu, 7 Nov 1996 12:13:38 -0800 + +mgetty (0.99.2-7) unstable; urgency=low + + * Split up package in mgetty, mgetty-fax, mgetty-voice, mgetty-docs + * /FIDO/ enabled in login.config but still compiled without FIDO support + enabled since it generates weird characters on login. + + -- Christoph Lameter Wed, 6 Nov 1996 21:46:34 -0800 + +mgetty (0.99.2-6) unstable; urgency=low + + * viewfax included in distribution + * depend on cron + + -- Christoph Lameter Thu, 31 Oct 1996 08:21:19 -0800 + +mgetty (0.99.2-5) unstable; urgency=low + + * bug in postrm script + + -- Christoph Lameter Wed, 30 Oct 1996 17:48:35 -0800 + +mgetty (0.99.2-4) unstable; urgency=low + + * stripped newslock + * guina pig for debmake 1.03 + + -- Christoph Lameter Sat, 26 Oct 1996 19:12:22 -0700 + +mgetty (0.99.2-3) unstable; urgency=low + + * postinst wrote some stuff to output that it should not have + + -- Christoph Lameter Fri, 25 Oct 1996 09:11:26 -0700 + +mgetty (0.99.2-2) unstable; urgency=low + + * debmake 0.91 gets rid of most scripts + + -- Christoph Lameter Tue, 22 Oct 1996 17:09:28 -0700 + +mgetty (0.99.2-1) unstable; urgency=low + + * New upstream release + * include frontends section in /usr/doc/mgetty + * include callback binary + manpage + * Fixed the echo command problems + + -- Christoph Lameter Sat, 19 Oct 1996 14:26:16 -0800 + +mgetty (0.99-12) unstable; urgency=low + + * debmake bug: scripts not included in -11 + + -- Christoph Lameter Thu, 17 Oct 1996 06:54:41 -0800 + +mgetty (0.99-11) unstable; urgency=low + + * Added g3tolj and g3toxwd to distribution + * switched to using debmake for generating the package so I dont forget + or mess up permissions in the future. + * Script to implement log rotation had wrong name and wrong permissions. + + -- Christoph Lameter Sat, 12 Oct 1996 21:30:15 -0800 + +mgetty (0.99-10) unstable; urgency=low + + * Added log rotation + * Added changelog.Debian in /usr/doc/mgetty + + -- Christoph Lameter Sat, 12 Oct 1996 09:00:00 -0800 + +mgetty (0.99-9) unstable;urgency=low + + * bug in postinst: wrong location of inittab.DEBIAN + + -- Christoph Lameter Mon, 7 Oct 1996 09:00:00 -0800 + +mgetty (0.99-8) unstable;urgency=low + + * /etc/mgetty/login.config: Disabled /FIDO/ line. Provided a sane pppd + invocation line. + * script in /etc/mgetty/new_fax moved to /usr/lib/mgetty+sendfax since + dpkg does not seem to allow executable scripts in /etc. + /etc/mgetty/new_fax made a symlink to /usr/lib/mgetty+sendfax/new_fax. + Change the symlink to a modified script if you need to. + * Documentation in README.debian updated. + + -- Christoph Lameter Sat, 5 Oct 1996 09:00:00 -0800 + +mgetty (0.99-7) unstable;urgency=low + + * updated Documentation + * Made new_fax executable + * Removed the /etc/init.d/fax stuff again since running a perl + binary all the time is not very resource friendly. Plus the + stopping of that daemon did not work. + * Automatically add an entry to crontab to run faxrunq every half hour. + + -- Christoph Lameter Thu, 3 Oct 1996 09:00:00 -0800 + +mgetty (0.99-6) unstable;urgency=low + + * Fax is created with group fax instead of uucp + * Diversions added for g3topbm and pbmtog3 for the netpbm package + * /etc/init.d/fax script provided for fax queue runs. postinst, postrm + modified accordingly + * New upstream 0.99 beta release from September 15, 1996 from ftp.leo.org + * Installation adds examples to /etc/inittab and also a new documentation + file inittab.DEBIAN is included. The mgetty section in /etc/inittab + will be removed on purging the packet. + + -- Christoph Lameter Tue, 24 Sep 1996 09:00:00 -0800 + +mgetty (0.99-5) unstable;urgency=low + + * info files, manpages and big doc files gzipped + * Added voice.conf file and a lot of information that was missing + regarding using mgetty as an answering machine etc. Someone please + test the voice part since I dont use that part of mgetty. + * Moved faxrunq* to /usr/sbin + + -- Christoph Lameter Fri, 20 Sep 1996 09:00:00 -0800 + +mgetty (0.99-4) unstable;urgency=low + + * Added Doc on how to do dialup from win95 with mgetty/ppp + * New upstream 0.99 beta release from August 07. + + -- Christoph Lameter Sat, 7 Sep 1996 09:00:00 -0800 + +mgetty (0.99-3) unstable;urgency=high + + * Updated to new standards 2.1.0.0 (big change, please test everything!) + * Removes /var/log/mgetty on deinstallation + * Fixes permission issue + * Available Documentation in /usr/doc/mgetty included + * Available Samples in /usr/doc/examples/mgetty included + * new_fax script automatically preconfigured + * README.debian included with known problems + * Sane Makefile behaviour + * faxheader and new_fax moved to /etc/mgetty as they are config files + +Thy Jul 25 Christoph Lameter + + * upgrade to 0.99 version of July 23, 1996 + * some locations / names of files in voice section + were changed and resultet in minor changes to installation procedure + +Fri Nov 3 21:53:03 1995 Nils Rennebarth + + * Created a new package + + --- mgetty-1.1.36.orig/debian/compat +++ mgetty-1.1.36/debian/compat @@ -0,0 +1 @@ +7 --- mgetty-1.1.36.orig/debian/control +++ mgetty-1.1.36/debian/control @@ -0,0 +1,86 @@ +Source: mgetty +Section: comm +Priority: optional +Maintainer: Andreas Barth +Build-Depends: debhelper (>= 7), texi2html, texinfo, texlive, groff, libx11-dev, patch, perl, dpatch, po-debconf +Standards-Version: 3.8.0 +Homepage: http://mgetty.greenie.net/ + +Package: mgetty +Suggests: mgetty-fax +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, logrotate (>= 3.5.4-1), dpkg (>= 1.15.4) | install-info +Conflicts: mgetty-docs (<= 1.1.30-6) +Replaces: mgetty-docs +Description: Smart Modem getty replacement + Mgetty is a versatile program to handle all aspects of a modem under Unix. + . + The program 'mgetty' allows you to use a modem for handling external + logins, receiving faxes and using the modem as a answering machine without + interfering with outgoing calls. + . + This package includes basic modem data capabilities. Install mgetty-fax to + get the additional functionality for fax. Install mgetty-voice to get the + functionality to operate voice modems. + . + Mgetty is also configurable to select programs other than login for special + connections (eg: uucico, fido or other programs) depending on the login + userid. It also supports caller-id if the modem and phone line supply it, + and can deny connections based on originating telephone number. + +Package: mgetty-fax +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, cron, mgetty (= ${binary:Version}), perl +Suggests: debianutils (>= 1.6), netpbm, ghostscript, mgetty-viewfax (>= ${binary:Version}) +Replaces: mgetty +Conflicts: mgetty (<= 1.1.30-9) +Description: Faxing tools for mgetty + The fax subsystem of the mgetty package. + . + This subsystems has the enhancements that are needed to send and receive + faxes with mgetty and a Class 2 faxmodem. + . + The program 'mgetty' allows you to use a fax modem for receiving faxes + and handling external logins without interfering with outgoing calls. + +Package: mgetty-viewfax +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Program for displaying Group-3 Fax files under X + The program 'viewfax' allows you to view Group-3 fax files in an X window. + Group-3 is the "standard" format for faxes. + +Package: mgetty-voice +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, mgetty (= ${binary:Version}) +Suggests: mgetty-pvftools +Description: Voicemail handler for mgetty + Vgetty allows you to add answering machine / voicemail capability to all + the other normal mgetty functions. + . + The program 'mgetty' allows you to use a voice modem as an answering + machine and handling external logins without interfering with outgoing + calls. + . + To create and manipulate voice messages, you need the mgetty-pvftools + package. + +Package: mgetty-pvftools +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Conflicts: mgetty-voice (<= 1.1.27-3), ${misc:Depends} +Description: Programs for listening and manipulating pvf and rmd files + This package contains different utilities from the vgetty package which + permit to create, listen and manipulate rmd or pvf files. These files are + the recorded "message files" for using a voice modem as an answering + machine. + . + You will want to install this package to create your greeting messages. + +Package: mgetty-docs +Section: doc +Architecture: all +Depends: ${misc:Depends} +Description: Documentation Package for mgetty + Sample files and lots of documentation for mgetty. Additional source code + for programs included that allow to set up a user interface for mgetty. --- mgetty-1.1.36.orig/debian/copyright +++ mgetty-1.1.36/debian/copyright @@ -0,0 +1,32 @@ +This is the Debian GNU/Linux prepackaged version of mgetty+sendfax +Mgetty was written by Gert Doering +or + +You can find the source here: + + ftp://alpha.greenie.net/pub/mgetty/source/ + +This package was originally put together by: + Nils Rennebarth +and was subsequently been maintained by: + Christoph Lameter, John Goerzen, and briefly Paul Haggart +at which point Philip Hands took over (Mid 1997). + +Since version 1.1.22, mgetty (and vgetty) is distributed under the GNU +GPL. On Debian GNU/Linux systems, the text of the GPL can be found in +the directory /usr/share/common-licenses/. + +In the frontends directories (/usr/share/doc/mgetty/frontends/...): + viewfax-2.5: + Copyright (C) 1990, 1995 Frank D. Cringle + Distributed under the GNU GPL (see above) + + faxview-0.2: + Copyright (C) 1994--1996 Ralph Schleicher + Distributed under the GNU GPL (see above) + + the "rs" utilities for Emacs: + Copyright (C) 1995 Ralph Schleicher + Distributed under the GNU GPL (see above) + + Many others whose distribution terms are explained in their source code... --- mgetty-1.1.36.orig/debian/faxheader +++ mgetty-1.1.36/debian/faxheader @@ -0,0 +1,2 @@ + + FAX FROM: **not configured** TO: @T@ PAGE: @P@ OF @M@ --- mgetty-1.1.36.orig/debian/fixpaths.pl +++ mgetty-1.1.36/debian/fixpaths.pl @@ -0,0 +1,35 @@ +#! /usr/bin/perl -w + +# fix path/programmname for the list of files +# /usr/local/bin/perl -> perl +# /usr/lib/sendmail -> /usr/sbin/sendmail +# /bin/ksh -> /bin/bash +# /usr/local/bin/vm -> /usr/bin/vm + +@fix=( +'debian/mgetty-docs/usr/share/doc/mgetty/contrib/faxmail-smail', +'debian/mgetty-docs/usr/share/doc/mgetty/frontends/faxmail/faxmail', +'debian/mgetty-docs/usr/share/doc/mgetty/contrib/watchit.pl', +'debian/mgetty-docs/usr/share/doc/mgetty/frontends/mail2fax/mail2fax.rc', +'debian/mgetty-docs/usr/share/doc/mgetty/frontends/mmdf-mail2fax/faxgate.pl', +'debian/mgetty-docs/usr/share/doc/mgetty/examples/fax', +'debian/mgetty-docs/usr/share/doc/mgetty/examples/new_fax.hpa', +'debian/mgetty-docs/usr/share/doc/mgetty/examples/new_fax.mime1', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/button.sh', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/demo.pl', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/demo.sh', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/dtmf.sh', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/events.sh', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/message.sh', +'debian/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts/vmtest.sh' ); + +foreach $i (@fix) { + print `sed ' \ + s|/usr/local/bin/perl5|/usr/bin/perl|; \ + s|/usr/local/bin/perl|/usr/bin/perl|; \ + s|/usr/lib/sendmail|/usr/sbin/sendmail|; \ + s|/bin/ksh|/bin/bash|; \ + s|/usr/local/bin/vm|/usr/bin/vm|; \ + ' < $i > $i.fixed && mv $i.fixed $i`; + exit ($? >> 8) if ($? >> 8); +} --- mgetty-1.1.36.orig/debian/inittab +++ mgetty-1.1.36/debian/inittab @@ -0,0 +1,15 @@ +# The following are examples on how to use mgetty for your modem lines. + +# Standard case: Full featured mgetty controlled from /etc/mgetty/mgetty.config +#s0:23:respawn:/sbin/mgetty ttyS0 + +# A modem that does only data. Modems often have trouble distinguishing data +# calls from fax call. You might want to use this with those troublesome modems. +#s1:23:respawn:/sbin/mgetty -D ttyS1 + +# A special modem that displays a different issue file. +#s2:23:respawn:/sbin/mgetty -i /etc/issue.special ttyS2 + +# A modem that only supports 19200 baud and we would like it to only pick up +# after the 4th ring. +#s3:23:respawn:/sbin/mgetty -n4 -s19200 -D ttyS3 --- mgetty-1.1.36.orig/debian/issue.mgetty +++ mgetty-1.1.36/debian/issue.mgetty @@ -0,0 +1 @@ +Debian GNU/\s \P \S (\I) --- mgetty-1.1.36.orig/debian/mgetty-docs.dirs +++ mgetty-1.1.36/debian/mgetty-docs.dirs @@ -0,0 +1,4 @@ +usr/share/doc/mgetty/examples +usr/share/doc/mgetty/voice/examples/perl +usr/share/doc/mgetty/voice/examples/scripts +usr/share/info --- mgetty-1.1.36.orig/debian/mgetty-docs.preinst +++ mgetty-1.1.36/debian/mgetty-docs.preinst @@ -0,0 +1,17 @@ +#!/bin/bash +# The first version of mgetty-doc shipped with a real doc dir +# rather than a link to mgetty +REAL_DOC="1.1.14-1" +case "$1" in + upgrade) + if /usr/bin/dpkg --compare-versions $2 lt $REAL_DOC && + test -L /usr/doc/mgetty-docs && + expr "`ls -ld /usr/doc/mgetty-docs`" : '.* /usr/doc/mgetty-docs -> mgetty$' >/dev/null + then + echo "Removing obsolete /usr/doc/mgetty-docs symlink." + rm -f /usr/doc/mgetty-docs + fi + ;; +esac + +#DEBHELPER# --- mgetty-1.1.36.orig/debian/mgetty-fax.NEWS +++ mgetty-1.1.36/debian/mgetty-fax.NEWS @@ -0,0 +1,16 @@ +mgetty (1.1.35-1) unstable; urgency=low + + acct.log has been massively overhauled. Please see the upstream + documentation on the new format. + + -- Andreas Barth Sun, 16 Apr 2006 21:46:25 +0200 + +mgetty (1.1.30-7) unstable; urgency=low + + outgoing fax has undergone a major change: faxrunqd runs now as non-root + user. This requires some changes. The most notable one is that for + spooling faxes there is now a setuid programm for creating and populating + the spool dir. This change should normally not break your setup, but if + you have problems, you should start looking at this place. + + -- Andreas Barth Wed, 8 Oct 2003 20:01:01 +0200 --- mgetty-1.1.36.orig/debian/mgetty-fax.config +++ mgetty-1.1.36/debian/mgetty-fax.config @@ -0,0 +1,8 @@ +#!/bin/sh -e + +. /usr/share/debconf/confmodule +db_version 2.0 +db_title Configuring mgetty-fax... + +db_input "medium" mgetty-fax/start_faxrunqd || true +db_go --- mgetty-1.1.36.orig/debian/mgetty-fax.dirs +++ mgetty-1.1.36/debian/mgetty-fax.dirs @@ -0,0 +1,9 @@ +usr/share/mgetty/templates/etc +etc/mgetty +usr/share/doc/mgetty +usr/share/doc/mgetty/fax +usr/share/man/man1 +usr/sbin +usr/bin +var/spool/fax/outgoing +var/log/mgetty/fax --- mgetty-1.1.36.orig/debian/mgetty-fax.files +++ mgetty-1.1.36/debian/mgetty-fax.files @@ -0,0 +1,13 @@ +usr/bin/pbm* +usr/bin/*g3* +usr/bin/fax* +usr/sbin/sendfax +usr/share/man/man1/*g3* +usr/share/man/man1/fax* +usr/share/man/man1/mgetty-fax* +usr/share/man/man1/cover* +usr/share/man/man1/pbm* +usr/share/man/man5 +usr/share/man/man8/*fax* +etc/mgetty/*fax* +usr/lib/mgetty-fax --- mgetty-1.1.36.orig/debian/mgetty-fax.init.d +++ mgetty-1.1.36/debian/mgetty-fax.init.d @@ -0,0 +1,88 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: mgetty-fax +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +### END INIT INFO + +PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin +DAEMON=/usr/sbin/faxrunqd +NAME=faxrunqd +DESC="Fax Queue Daemon" + +test -f $DAEMON || exit 0 + +check_for_no_start() { + # (function copied from ssh init script) + # exit if we're trying to start and /etc/mgetty/.faxrunqd_not_to_be_run exists + if [ -e /etc/mgetty/.faxrunqd_not_to_be_run ]; then + exit 0 + fi +} + +if [ ! -d /var/lock/fax ]; then + mkdir /var/lock/fax + chown uucp:root /var/lock/fax +fi +if [ ! -d /var/run/mgetty-fax ]; then + mkdir /var/run/mgetty-fax + chown uucp:root /var/run/mgetty-fax +fi + +case "$1" in + start) + check_for_no_start + if grep -q "^fax-devices" /etc/mgetty/faxrunq.config; then + echo -n "Starting $DESC: " + start-stop-daemon --start --quiet --pidfile /var/run/mgetty-fax/$NAME.pid \ + --exec $DAEMON -- -D -u uucp -g dialout + echo "$NAME." + else + echo "$DESC not yet configured while configured for starting within the debconf database." + echo "Please either edit /etc/mgetty/faxrunq.config or run \"dpkg-reconfigure mgetty-fax\" to fix this problem." + exit 0 + fi + ;; + stop) + echo -n "Stopping $DESC: $NAME." + [ -f /var/run/mgetty-fax/$NAME.pid ] && echo || echo " (not running)" + start-stop-daemon --stop --quiet \ + --retry -HUP/60/-TERM \ + --pidfile /var/run/mgetty-fax/$NAME.pid \ + --oknodo --name $NAME --signal HUP + ;; + #reload) + # + # If the daemon can reload its config files on the fly + # for example by sending it SIGHUP, do it here. + # + # If the daemon responds to changes in its config file + # directly anyway, make this a do-nothing entry. + # + # echo "Reloading $DESC configuration files." + # start-stop-daemon --stop --signal 1 --quiet --pidfile \ + # /var/run/$NAME.pid --exec $DAEMON + #;; + restart|force-reload) + # + # If the "reload" option is implemented, move the "force-reload" + # option to the "reload" entry above. If not, "force-reload" is + # just the same as "restart". + # + echo -n "Restarting $DESC: " + $0 stop + sleep 1 + $0 start + echo "$NAME." + ;; + *) + N=/etc/init.d/$NAME + # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2 + echo "Usage: $N {start|stop|restart|force-reload}" >&2 + exit 1 + ;; +esac + +exit 0 --- mgetty-1.1.36.orig/debian/mgetty-fax.logrotate +++ mgetty-1.1.36/debian/mgetty-fax.logrotate @@ -0,0 +1,9 @@ +/var/log/mgetty/fax/sendfax.log { + daily + rotate 7 + create 640 uucp adm + compress + delaycompress + notifempty + missingok +} --- mgetty-1.1.36.orig/debian/mgetty-fax.postinst +++ mgetty-1.1.36/debian/mgetty-fax.postinst @@ -0,0 +1,77 @@ +#!/bin/sh -e + +# summary of how this script can be called: +# * `configure' +# * `abort-upgrade' +# * `abort-remove' `in-favour' +# +# * `abort-deconfigure' `in-favour' +# `removing' +# +# for details, see /usr/share/doc/packaging-manual/ +# +# quoting from the policy: +# Any necessary prompting should almost always be confined to the +# post-installation script, and should be protected with a conditional +# so that unnecessary prompting doesn't happen if a package's +# installation fails and the `postinst' is called with `abort-upgrade', +# `abort-remove' or `abort-deconfigure'. + +# make sure this file exists to prevent someone from doing a symlink exploit +test -e /var/spool/fax/outgoing/faxqueue_done || + touch /var/spool/fax/outgoing/faxqueue_done +chown uucp:fax /var/spool/fax/outgoing/faxqueue_done + +# ensuring proper permissions +FAX_USER=uucp +FAX_GROUP=fax + +# conditional stuff +case "$1" in + configure) + # place the templates in /etc if they're not there ... + for file in faxheader faxrunq.config sendfax.config; do + if [ ! -f /etc/mgetty/$file ] ; then + cp -a /usr/share/mgetty/templates/etc/$file /etc/mgetty/$file; + fi; + done + + . /usr/share/debconf/confmodule + db_version 2.0 + + db_get "mgetty-fax/start_faxrunqd" + + if [ "$RET" = "true" ]; then + rm -f /etc/mgetty/.faxrunqd_not_to_be_run || true + else + touch /etc/mgetty/.faxrunqd_not_to_be_run + fi + + db_stop + + # ensuring permissions are set correctly + if ! dpkg-statoverride --list /usr/lib/mgetty-fax/faxq-helper >/dev/null; then + dpkg-statoverride --update --add $FAX_USER $FAX_GROUP 4755 /usr/lib/mgetty-fax/faxq-helper; + fi + + for i in /var/spool/fax/outgoing /var/log/mgetty/fax; do + if ! dpkg-statoverride --list $i >/dev/null; then + dpkg-statoverride --update --add $FAX_USER root 0755 $i; + fi + done + + # for upgrades from < 1.1.30-7 (means: woody) + # set new make.coverpg-location + if [ -x /usr/lib/mgetty+sendfax/make.coverpg -a ! -e /etc/mgetty/make.coverpg ]; + then ln -s /usr/lib/mgetty+sendfax/make.coverpg /etc/mgetty/ + fi + ;; + abort-upgrade|abort-remove|abort-deconfigure) + ;; + *) + ;; +esac + +#DEBHELPER# + +exit 0; --- mgetty-1.1.36.orig/debian/mgetty-fax.postrm +++ mgetty-1.1.36/debian/mgetty-fax.postrm @@ -0,0 +1,26 @@ +#!/bin/sh -e + +case "$1" in + purge) + # remove the configuration files in /etc/mgetty + for file in faxheader faxrunq.config sendfax.config; do + if [ -f /etc/mgetty/$file ] ; then + rm -f /etc/mgetty/$file + fi + if [ -f /etc/mgetty/$file.dpkg-old ] ; then + rm -f /etc/mgetty/$file.dpkg-old + fi + if [ -f /etc/mgetty/$file.dpkg-new ] ; then + rm -f /etc/mgetty/$file.dpkg-new + fi + done + rmdir /etc/mgetty || true; + rm -f /var/spool/fax/outgoing/faxqueue_done + rmdir /var/spool/fax/outgoing /var/spool/fax || true; + rm -rf /var/lock/fax /var/run/mgetty-fax + ;; + *) + ;; +esac + +#DEBHELPER# --- mgetty-1.1.36.orig/debian/mgetty-fax.preinst +++ mgetty-1.1.36/debian/mgetty-fax.preinst @@ -0,0 +1,24 @@ +#!/bin/sh + +action=$1 +version=$2 + +case $action in + upgrade|install ) + if [ -n "$version" ] && dpkg --compare-versions "$version" lt 1.1.28-1 + then + # Log files should go in /var/log/mgetty + if [ -f /var/log/acct.log ]; then + echo "Moving /var/log/acct.log to /var/log/mgetty..." + mv /var/log/acct.log /var/log/mgetty/ + fi + if [ -f /var/log/faxrunqd.log ]; then + echo "Moving /var/log/faxrunqd.log to /var/log/mgetty..." + mv /var/log/faxrunqd.log /var/log/mgetty/ + fi + fi + ;; +esac + +#DEBHELPER# + --- mgetty-1.1.36.orig/debian/mgetty-fax.prerm +++ mgetty-1.1.36/debian/mgetty-fax.prerm @@ -0,0 +1,12 @@ +#!/bin/sh -e + +action=$1 +version=$2 + +if [ "$1" = "remove" ] +then + rm -f /etc/mgetty/.faxrunqd_not_to_be_run + rm -f /var/spool/fax/outgoing/.last_run +fi + +#DEBHELPER# --- mgetty-1.1.36.orig/debian/mgetty-fax.templates +++ mgetty-1.1.36/debian/mgetty-fax.templates @@ -0,0 +1,41 @@ +Template: mgetty-fax/start_faxrunqd +Type: boolean +Default: true +Description: Run faxrunqd during system startup? + The mgetty-fax package contains a daemon ("faxrunqd") that can + automatically take in charge the sending of the faxes spooled with + faxspool. This daemon and the faxrunq utility need + /etc/mgetty/faxrunq.config to be configured appropriately in order to run. + If you plan to use faxrunqd, please indicate so. +Description-cs.UTF-8: Spouštět faxrunqd během startu systému? + Balíček mgetty-fax obsahuje démona ("faxrunqd"), který automaticky zařizuje zasílání faxů zařazených do fronty pomocí faxspool. Tento démon a nástroj faxrunq potřebují ke svému běhu náležitě nastavený /etc/mgetty/faxrunq.config. Pokud plánujete používat faxrunqd, potvrďte to. +Description-da.UTF-8: Vil du køre faxrunqd under systemetopstart? + Pakken mgetty-fax indeholder en dæmon ("faxrunqd"), som automatisk kan overtage afsendelsen af fax'er, der er lagt i kø i faxkøen. Denne dæmon og værktøjet faxrunq kræver at /etc/mgetty/faxrunq.config er sat ordentligt op for at kunne køre. Hvis du regner med at køre faxrunqd skal du angive det her. +Description-de.UTF-8: faxrunqd während des Systemstarts starten? + Das mgetty-fax Paket enthält ein Systemprogramm ("faxrunqd"), das automatisch Faxe versenden kann, die mit faxspool zum Senden vorgemerkt werden. Damit Faxen mit diesem oder faxrunq versendet werden können, muß /etc/mgetty/faxrunq.config angepasst werden. Bitte geben Sie an, ob faxrunqd verwendet werden soll. +Description-es.UTF-8: ¿Ejecutar «faxrunqd» durante el inicio del sistema? + El paquete mgetty-fax contiene un demonio («faxrunqd») que puede encargarse automáticamente de enviar los faxes encolados con «faxspool». Este demonio y la herramienta «faxrunq» necesitan configurarse apropiadamente en el archivo «/etc/mgetty/faxrunq.config» para poder ejecutarse. Si planea usar «faxrunqd», por favor indíquelo. +Description-eu.UTF-8: Exekutatu faxrunqd sistema abiaraztean? + mgetty-fax paketeak faxspool bidez hilaran dauden fax-ak bidaltzeko ardura artu dezakeen deabru bat ("fazrunqd") du. Deabru honek eta faxrunq lanabesak /etc/mgetty/faxrunq.config behar dute behar bezala konfiguraturik egon eta funtzionatu ahal izateko. Faxrunqd erabiltzea pentsatzen baduzu, mesedez zehaztu ezazu. +Description-fi.UTF-8: Tulisiko faxrunqd käynnistää järjestelmän käynnistyessä? + Paketti mgetty-fax sisältää taustaohjelman ”faxrunqd”, jonka avulla voidaan faxspoolilla jonoon laitetut faksit lähettää automaattisesti. Tämä taustaohjelman ja faxrunq-työkalun asetukset tulee tehdä tiedostoon /etc/mgetty/faxrunq.config. Valitse otetaanko ohjelma faxrunqd käyttöön. +Description-fr.UTF-8: Souhaitez-vous lancer faxrunqd au démarrage du système ? + Le paquet mgetty-fax contient un démon (« faxrunqd ») qui prend en charge automatiquement l'envoi des fax avec faxspool. Ce démon et l'utilitaire faxrunq ont besoin que le fichier /etc/mgetty/faxrunq.config soit correctement configuré. Veuillez indiquer si vous souhaitez utiliser faxrunqd. +Description-gl.UTF-8: ¿Executar faxrunqd durante o inicio do sistema? + O paquete mgetty-fax contén un servizo ("faxrunqd") que pode encargarse automaticamente do envío dos faxes postos en cola con "faxspool". Este servizo e a utilidade faxrunq precisan de que se configure do xeito apropiado o ficheiro /etc/mgetty/faxrunq.config para poderen funcionar. Se pensa empregar faxrunqd, indíqueo. +Description-it.UTF-8: Eseguire faxrunqd all'avvio del sistema? + Il pacchetto mgetty-fax contiene un demone ("faxrunqd") che si occupa automaticamente dell'invio dei fax lasciati nell'apposito spool da faxspool. Per poter funzionare correttamente il demone e il programma faxrunq devono essere configurati tramite il file /etc/mgetty/faxrunq.config. Indicare se si ha intenzione di utilizzare faxrunqd. +Description-ja.UTF-8: faxrunqd をシステム起動中に起動しますか? + mgetty-fax パッケージは、faxspool に溜められた FAX を自動的に送信可能にするデーモン ("faxrunqd") を含んでいます。このデーモンと faxrunq ユーティリティは、動作するために適切に設定した /etc/mgetty/faxrunq.config ファイルを必要とします。faxrunqd を使う予定がある場合は、そのように設定してください。 +Description-nl.UTF-8: Wilt u faxrunqd uitvoeren tijdens het opstarten van het systeem? + Het 'mgetty-fax'-pakket bevat een achtergronddienst ("faxrunqd") die automatisch het verzenden van de faxen, die door faxspool in de buffer geplaatst werden, kan beheren. Om deze achtergronddienst en het 'faxrunq'-hulpprogramma te laten werken moeten deze juist geconfigureerd worden met het bestand /etc/mgetty/faxrunq.config. Indien u 'faxrunq' wilt gebruiken, dient u met 'ja' te bevestigen. +Description-pt.UTF-8: Correr o faxrunqd durante o arranque do sistema? + O pacote mgetty-fax contém um daemon ("faxrunqd") que pode, automaticamente, tomar conta do envio dos faxes em espera com o faxspool. Este daemon e o utilitário necessitam que o /etc/mgetty/faxrunq.config esteja devidamente configurado para correrem. Se planeia usar o faxrunqd, indique que o deseja. +Description-pt_BR.UTF-8: Executar faxrunqd durante a inicialização do sistema? + O pacote mgetty-fax contém um daemon ("faxrunqd") que pode automaticamente ter no comando o envio de faxes enfileirados com o faxspool. Este daemon e o utilitário faxrunq precisam que o arquivo /etc/mgetty/faxrunq.config seja configurado apropriadamente para para que possam ser executados. Se você planeja usar faxrunqd, por favor indique isso. +Description-ru.UTF-8: Запускать faxrunqd при включении компьютера? + Пакет mgetty-fax содержит службу ("faxrunqd"), которая может автоматически отправлять факсы, отправленные с помощью программы faxspool. Для работы данной службы и утилиты faxrunq требуются правильные настройки в файле /etc/mgetty/faxrunq.config. Если вы планируете использовать faxrunqd, обратите на это внимание. +Description-sv.UTF-8: Köra faxrunqd vid systemets uppstart? + Paketet mgetty-fax innehåller en daemon ("faxrunqd") som automatiskt kan ta hand om sändningen av fax som köats upp av faxspool. Daemonen och verktyget faxrunq behöver /etc/mgetty/faxrunq.config att vara lämpligt konfigurerad för att kunna köra. Om du planerar att använda faxrunqd, välj då detta. +Description-vi.UTF-8: Chạy «faxrunqd» trong khi khởi động hệ thống không? + Gói tin «mgetty-fax» chứa một trình nền (dæmon) được gọi là «faxrunqd» mà có thể tự động quản lý việc gửi các fax do «faxspool» tập hợp. Để chạy cả hai trình nền này và tiện ích «faxrunq» đều thì phải cấu hình tập tin «/etc/mgetty/faxrunq.config» một cách thích hợp. Nếu bạn định sử dụng «faxrunqd», hãy ngụ ý như thế tại đây. --- mgetty-1.1.36.orig/debian/mgetty-fax.templates.master +++ mgetty-1.1.36/debian/mgetty-fax.templates.master @@ -0,0 +1,9 @@ +Template: mgetty-fax/start_faxrunqd +Type: boolean +Default: true +_Description: Run faxrunqd during system startup? + The mgetty-fax package contains a daemon ("faxrunqd") that can + automatically take in charge the sending of the faxes spooled with + faxspool. This daemon and the faxrunq utility need + /etc/mgetty/faxrunq.config to be configured appropriately in order to run. + If you plan to use faxrunqd, please indicate so. --- mgetty-1.1.36.orig/debian/mgetty-viewfax.copyright +++ mgetty-1.1.36/debian/mgetty-viewfax.copyright @@ -0,0 +1,15 @@ +This is the Debian GNU/Linux prepackaged version of viewfax +Viewfax was written by Frank Cringle (fdc@cliwe.ping.de) + +This package was put together by Philip Hands +from sources found as part of the mgetty tarball found at: + + ftp://alpha.greenie.net/pub/mgetty/source/ + +viewfax is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the +Free Software Foundation; either version 2 of the License, or (at your +option) any later version. + +On Debian GNU/Linux systems, the text of the GPL can be found in +the directory /usr/share/common-licenses/. --- mgetty-1.1.36.orig/debian/mgetty-viewfax.dirs +++ mgetty-1.1.36/debian/mgetty-viewfax.dirs @@ -0,0 +1,4 @@ +usr/bin +usr/lib +usr/share/doc +usr/share/man/man1 --- mgetty-1.1.36.orig/debian/mgetty-viewfax.mime +++ mgetty-1.1.36/debian/mgetty-viewfax.mime @@ -0,0 +1,3 @@ +image/fax; viewfax '%s'; test=test -n "$DISPLAY"; description="Fax file" +image/fax-g3; viewfax '%s'; test=test -n "$DISPLAY"; description="G3-encoded Fax file" +image/fax-g4; viewfax '%s'; test=test -n "$DISPLAY"; description="G4-encoded Fax file" --- mgetty-1.1.36.orig/debian/mgetty-viewfax.postinst +++ mgetty-1.1.36/debian/mgetty-viewfax.postinst @@ -0,0 +1,3 @@ +#!/bin/sh -e + +#DEBHELPER# --- mgetty-1.1.36.orig/debian/mgetty-voice.dirs +++ mgetty-1.1.36/debian/mgetty-voice.dirs @@ -0,0 +1,9 @@ +usr/share/mgetty/templates/etc +etc/mgetty +usr/bin +usr/sbin +usr/share/man/man1 +usr/share/man/man8 +usr/share/doc/mgetty +var/spool/voice/incoming +var/spool/voice/messages --- mgetty-1.1.36.orig/debian/mgetty-voice.files +++ mgetty-1.1.36/debian/mgetty-voice.files @@ -0,0 +1 @@ +usr/share/man/man1 --- mgetty-1.1.36.orig/debian/mgetty-voice.postinst +++ mgetty-1.1.36/debian/mgetty-voice.postinst @@ -0,0 +1,24 @@ +#!/bin/sh -e + +case "$1" in + configure) + # place the templates in /etc if they're not there ... + for file in voice.conf; do + if [ ! -f /etc/mgetty/$file ] ; then + cp -a /usr/share/mgetty/templates/etc/$file /etc/mgetty/$file; + fi; + done + + chown -R root:voice /var/spool/voice/incoming /var/spool/voice/messages + chmod 755 /var/spool/voice/messages + chmod 775 /var/spool/voice/incoming + ;; + abort-upgrade|abort-remove|abort-deconfigure) + ;; + *) + ;; +esac + +#DEBHELPER# + +exit 0; --- mgetty-1.1.36.orig/debian/mgetty-voice.postrm +++ mgetty-1.1.36/debian/mgetty-voice.postrm @@ -0,0 +1,24 @@ +#!/bin/sh + + +case "$1" in + purge) + # remove the configuration files in /etc/mgetty + for file in voice.conf; do + if [ -f /etc/mgetty/$file ] ; then + rm -f /etc/mgetty/$file + fi + if [ -f /etc/mgetty/$file.dpkg-old ] ; then + rm -f /etc/mgetty/$file.dpkg-old + fi + if [ -f /etc/mgetty/$file.dpkg-new ] ; then + rm -f /etc/mgetty/$file.dpkg-new + fi + done + rmdir /etc/mgetty || true; + ;; + *) + ;; +esac + +#DEBHELPER# --- mgetty-1.1.36.orig/debian/mgetty.dirs +++ mgetty-1.1.36/debian/mgetty.dirs @@ -0,0 +1,11 @@ +usr/share/mgetty/templates/etc +usr/bin +usr/sbin +sbin +var/spool +var/log/mgetty +etc/mgetty +usr/lib/mgetty-fax +usr/share/doc/mgetty +usr/share/man +var/spool/fax/incoming --- mgetty-1.1.36.orig/debian/mgetty.info +++ mgetty-1.1.36/debian/mgetty.info @@ -0,0 +1 @@ +doc/mgetty.info --- mgetty-1.1.36.orig/debian/mgetty.logrotate +++ mgetty-1.1.36/debian/mgetty.logrotate @@ -0,0 +1,9 @@ +/var/log/mgetty/*.log { + daily + rotate 7 + create 640 root adm + compress + delaycompress + notifempty + missingok +} --- mgetty-1.1.36.orig/debian/mgetty.postinst +++ mgetty-1.1.36/debian/mgetty.postinst @@ -0,0 +1,60 @@ +#!/bin/sh -e + +case "$1" in + configure) + # place the templates in /etc if they're not there ... + for file in mgetty.config dialin.config login.config; do + if [ ! -f /etc/mgetty/$file ] ; then + cp -a /usr/share/mgetty/templates/etc/$file /etc/mgetty/$file; + fi; + done + + if [ -n "$2" ] && dpkg --compare-versions "$2" lt "1.1.27-4.1" + then + ( for pidfile in /var/run/mg-pid* /var/run/mgetty* + do + PID=`cat $pidfile` + kill $PID + done ) || true + fi + + # Remove old style of crontab insertion if present + if grep -qs '^#-- mgetty begin$' /etc/crontab + then + TMP=/etc/crontab.tmp + awk 'BEGIN {found=0} + /^#-- mgetty begin$/ {found = 1} + /^#-- mgetty end$/ {found = -1} + {if (!found) print} + {if (found == -1) found=0} + END {if (found) exit 1}' /etc/crontab >$TMP && + if [ -s $TMP ] + then + mv -f $TMP /etc/crontab + fi + fi + + if [ -f /etc/cron.daily/mgetty ]; then + rm -f /etc/cron.daily/mgetty + fi + +# Tidy up after cron.daily bug + if expr "$OLD_VER" : "1.[01].[0-8]-" >/dev/null + then + echo -n "removing debris from /var/log/mgetty ..." + find /var/log/mgetty -type f -name '*.[0-9].*[0-9]*' -print0 | \ + perl -n0e unlink + echo done. + fi + ;; + abort-upgrade|abort-remove|abort-deconfigure) + ;; + *) + ;; +esac + +chmod 0600 /etc/mgetty/login.config + +#DEBHELPER# + +exit 0; --- mgetty-1.1.36.orig/debian/mgetty.postrm +++ mgetty-1.1.36/debian/mgetty.postrm @@ -0,0 +1,26 @@ +#!/bin/sh -e + +case "$1" in + purge) + # remove the configuration files in /etc/mgetty + for file in mgetty.config dialin.config login.config; do + if [ -f /etc/mgetty/$file ] ; then + rm -f /etc/mgetty/$file + fi + if [ -f /etc/mgetty/$file.dpkg-old ] ; then + rm -f /etc/mgetty/$file.dpkg-old + fi + if [ -f /etc/mgetty/$file.dpkg-new ] ; then + rm -f /etc/mgetty/$file.dpkg-new + fi + done + rmdir /etc/mgetty || true; + rmdir /var/spool/fax/incoming /var/spool/fax || true; + ;; + *) + ;; +esac + +#DEBHELPER# + +exit 0; --- mgetty-1.1.36.orig/debian/newslock.1 +++ mgetty-1.1.36/debian/newslock.1 @@ -0,0 +1,23 @@ +.TH newslock 1 "9 April 2004" +.IX newslock +.SH NAME +newslock - create atomic hard links +.SH USAGE +.TP +.B newslock +.I tempname +.I lockname +create a hard link from +.I tempname +to +.I lockname +if lockname did not exist before. Returns 0 if suceeds, 1 otherwise. + +.SH "SEE ALSO" +faxrunq(1). + + +.SH AUTHORS +Geoffrey Collyer, Henry Spencer +.\" All programms are free (as defined by the DFSG), but have different +.\" licences. Please see for details the individual manpages. --- mgetty-1.1.36.orig/debian/patches/00list +++ mgetty-1.1.36/debian/patches/00list @@ -0,0 +1,31 @@ + +01-adjust-path +03-callback_Makefile +04-new_fax.pbm +09-doc_Makefile +10-doc_faxrunqd.8in +12-fax_faxrunqd.in +13-pending-fax_faxspool.in +14-frontends_X11_viewfax-2.5_Makefile +23-samples_new_fax.mime4 +24-voice_include_paths.h +26-voice_libpvf_usr.c +36-voice_voice.conf-dist +37-Makefile +39-mgetty.cfg.in +40-locks.c_bug153394 +41-ugly-redo-ring.c_bug128668 +43-moreinfo-cnd.c_bug112163 +44-pending-faxexpand.h_bug169455 +45-logfile.c +51-pending-faxq-time +52-pending-metamail +54-location-makecoverpg + +60-fax-user +61-silentwav + +77-kFreeBSD +78-insecure-tmp-usage + +80-ppc64el --- mgetty-1.1.36.orig/debian/patches/01-adjust-path +++ mgetty-1.1.36/debian/patches/01-adjust-path @@ -0,0 +1,149 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.27.orig/frontends/winword2/WinFaxServ.pl ++++ mgetty-1.1.27/frontends/winword2/WinFaxServ.pl +@@ -11,8 +11,8 @@ + # notice if redistributing. + # + +-$MAILER="/usr/lib/sendmail"; +-$DIR="/usr/spool/fax/winword"; ++$MAILER="/usr/sbin/sendmail"; ++$DIR="/var/spool/fax/winword"; + + open(LOG, ">>/usr/adm/errors"); + select LOG; $| = 1;select STDOUT; +--- mgetty-1.1.27.orig/voice/scripts/new_voice.craig_southern ++++ mgetty-1.1.27/voice/scripts/new_voice.craig_southern +@@ -43,7 +43,7 @@ + outputfn=$fn.$extension + + # convert file into correct format +-/usr/local/bin/rmdtopvf $fn | /usr/local/bin/pvftowav 2>/dev/null > $outputfn ++/usr/bin/rmdtopvf $fn | /usr/bin/pvftowav 2>/dev/null > $outputfn + + echo --$seperator >> $tempfn + echo Content-Type: $contenttype\; name=\"$pagefn\" >> $tempfn +--- mgetty-1.1.27.orig/samples/new_fax.all/new_fax ++++ mgetty-1.1.27/samples/new_fax.all/new_fax +@@ -1,4 +1,4 @@ +-#!/bin/ksh ++#!/bin/sh + # + # Written 1996 by Darko Krizic + # +@@ -6,10 +6,11 @@ + # mgetty from Gert Doering. See the README file for more information. + + # Do the settings here +-home=/usr/local/newfax # The home directory +-config=$home/faxlist # The configuration file +-from="Fax Subsystem " # From this user +-log=/var/log/faxlog # logfile ++home=/etc/mgetty/newfax.d/ # The home directory ++config=/etc/mgetty/faxlist # The configuration file ++this_host=`hostname` ++from="Fax Subsystem " # From this user ++log=/var/log/mgetty/faxlog # logfile + + # Usually nothing to configure beyond this line + PATH=/usr/bin:/bin:/usr/local/bin:/usr/bin/X11 +--- mgetty-1.1.27.orig/login.cfg.in ++++ mgetty-1.1.27/login.cfg.in +@@ -30,7 +30,7 @@ + # (Big advantage: tuucp can use the same passwd file for serial dial-in + # and tcp dial-in [uucico running as in.uucpd]). Works from 1.05 up. + # +-#U* uucp @ /usr/lib/uucp/uucico -l -u @ ++#U* uucp @ /usr/sbin/uucico -l -u @ + + # + # Use this one for fido calls (login name /FIDO/ is handled specially) +@@ -39,7 +39,7 @@ + # mgetty has to be compiled with "-DFIDO", otherwise a fido call won't + # be detected. + # +-#/FIDO/ uucp fido /usr/local/lib/fnet/ifcico @ ++#/FIDO/ uucp fido /usr/lib/fnet/ifcico @ + + # + # Automatic PPP startup on receipt of LCP configure request (AutoPPP). +@@ -57,7 +57,7 @@ + # + # NOTE4: max. 9 arguments allowed. + # +-#/AutoPPP/ - a_ppp /usr/sbin/pppd auth -chap +pap login debug ++/AutoPPP/ - a_ppp /usr/sbin/pppd auth -chap +pap login debug + + # + # +--- mgetty-1.1.30.old/faxrunq.config 1998-11-12 10:26:00.000000000 -0500 ++++ mgetty-1.1.30/faxrunq.config 2003-07-01 19:14:55.000000000 -0400 +@@ -42,7 +42,7 @@ + #delete-sent-jobs y + + # accounting log file (default: see beginning of faxrunq/faxrunqd script) +-#acct-log /var/log/acct.log ++#acct-log /var/log/mgetty/fax/acct.log + + # The following options are for faxrunqd only: + +@@ -51,14 +51,14 @@ + #fax-devices ttyS0:ttyS1 + + # log file for faxrunqd (default: see beginning of faxrunqd script) +-#faxrunqd-log /var/log/faxrunqd.log ++#faxrunqd-log /var/log/mgetty/fax/faxrunqd.log + + # number of logfiles to keep around when rolling (default: 3) + #faxrunqd-keep-logs 5 + + # configuration file for policy routing, see faxrunqd man page for + # details (default: none, i.e. don't use policy routing) +-#policy-config /usr/local/lib/mgetty+sendfax/policy.config ++#policy-config /etc/mgetty/policy.config + + # call an external script if the fax queue length goes over threshold + # (default: off) +--- mgetty-1.1.27.orig/callback/README ++++ mgetty-1.1.27/callback/README +@@ -5,7 +5,7 @@ + # + # callback experiments + # +-cback-gert - - /usr/local/sbin/callback -S 11223344 ++cback-gert - - /usr/sbin/callback -S 11223344 + + to call you back on "11223344" upon entering of a login name of + "cback-gert". If you don't specify a number on the command line, +--- mgetty-1.1.27.orig/voice/man/man8/vgetty.8 2 Mar 2004 21:05:08 -0000 1.1.1.1 ++++ mgetty-1.1.27/voice/man/man8/vgetty.8 25 Mar 2005 17:48:20 -0000 +@@ -14,7 +14,7 @@ + run from the /etc/inittab file so it can respawn after each + call. Here is a typical inittab entry: + +-S0:345:respawn:/usr/local/sbin/vgetty ttyS0 ++S0:345:respawn:/usr/sbin/vgetty ttyS0 + + If you already have a line in your inittab file which invokes + .B mgetty, --- mgetty-1.1.36.orig/debian/patches/03-callback_Makefile +++ mgetty-1.1.36/debian/patches/03-callback_Makefile @@ -0,0 +1,33 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.27.orig/callback/Makefile ++++ mgetty-1.1.27/callback/Makefile +@@ -40,7 +40,7 @@ + # install programs + # + install: all +- $(INSTALL) -s -m 700 -o root callback $(SBINDIR) ++ $(INSTALL) -s -m 755 -o root callback $(SBINDIR) + $(INSTALL) -s -m 4711 -o root ct $(BINDIR) + + # source modules --- mgetty-1.1.36.orig/debian/patches/04-new_fax.pbm +++ mgetty-1.1.36/debian/patches/04-new_fax.pbm @@ -0,0 +1,30 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/samples/new_fax.pbm Thu Jan 2 15:40:12 1997 ++++ mgetty-1.1.30/samples/new_fax.pbm Sun Sep 28 16:46:09 2003 +@@ -1,4 +1,4 @@ +-#!/bin/sh ++#!/bin/bash + # From: michael@hal6000.thp.uni-duisburg.de (Michael Staats) + # Subject: Re: Fax notify without in/output redirection? + # To: mgetty@greenie.muc.de --- mgetty-1.1.36.orig/debian/patches/09-doc_Makefile +++ mgetty-1.1.36/debian/patches/09-doc_Makefile @@ -0,0 +1,92 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.28.copy/doc/Makefile 1997-11-27 15:33:26.000000000 -0500 ++++ mgetty-1.1.28/doc/Makefile 2002-07-30 03:27:31.000000000 -0400 +@@ -4,6 +4,8 @@ + # + + NROFF=nroff ++ ++INSTALL=install + # + # + MAN1PAGES=g32pbm.1 g3cat.1 pbm2g3.1 fax.1 \ +@@ -12,11 +14,11 @@ + MAN5PAGES=faxqueue.5 + MAN8PAGES=sendfax.8 mgetty.8 callback.8 faxrunqd.8 + MANSRC=$(MAN1PAGES) $(MAN4PAGES) $(MAN5PAGES) $(MAN8PAGES) +-MAN1DIR=/usr/local/man/man1 +-MAN4DIR=/usr/local/man/man4 +-MAN5DIR=/usr/local/man/man5 +-MAN8DIR=/usr/local/man/man8 +-INFODIR=/usr/local/info ++MAN1DIR=$(PREFIX)/usr/share/man/man1 ++MAN4DIR=$(PREFIX)/usr/share/man/man4 ++MAN5DIR=$(PREFIX)/usr/share/man/man5 ++MAN8DIR=$(PREFIX)/usr/share/man/man8 ++INFODIR=$(PREFIX)/usr/share/info + + # + # formatted man pages +@@ -26,18 +28,19 @@ + + all: + +-doc-all: mgetty.asc mgetty.info mgetty.dvi mgetty.ps fmt-manpages $(MANSRC) ++doc-all: mgetty.info mgetty.dvi mgetty.ps fmt-manpages $(MANSRC) # mgetty.asc + + manpages: $(MANSRC) + + fmt-manpages: + -$(MAKE) `for i in $(MANSRC) ; do echo \`expr $$i : "\([^.]*\)"\`.man ; done ` + +-mgetty.asc: mgetty.ms +- -$(NROFF) -ms mgetty.ms >mgetty.asc ++# commented out since I couldn't find texi2roff ++#mgetty.asc: mgetty.ms ++# -$(NROFF) -ms mgetty.ms >mgetty.asc + +-mgetty.ms: mgetty.texi +- -texi2roff -ms mgetty.ms ++#mgetty.ms: mgetty.texi ++# -texi2roff -ms mgetty.ms + + mgetty.html: mgetty.texi + -texi2html -verbose mgetty.texi +@@ -81,5 +81,5 @@ + if [ -f mgetty.info ] ; then\ +- test -d $(INFODIR) || mkdir $(INFODIR) 2>/dev/null ; \ ++ test -d $(INFODIR) || mkdir -p $(INFODIR) 2>/dev/null ; \ + for i in mgetty.info* ; do \ + $(INSTALL) -m 644 $$i $(INFODIR) ; \ + done ; \ +@@ -92,8 +99,8 @@ + ../mgetty0$(VS)doc.tar.gz: doc-all mgetty.html + gtar cvvf ../mgetty0$(VS)doc.tar mgetty.texi mgetty.info* \ + mgetty.dvi mgetty.ps \ +- mgetty.ms mgetty.asc \ + mgetty.html *.man ++# mgetty.ms mgetty.asc + gzip -f -9 -v ../mgetty0$(VS)doc.tar + + # explicit man page dependencies --- mgetty-1.1.36.orig/debian/patches/10-doc_faxrunqd.8in +++ mgetty-1.1.36/debian/patches/10-doc_faxrunqd.8in @@ -0,0 +1,82 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.old/doc/faxrunqd.8in 2002-11-23 11:47:17.000000000 -0500 ++++ mgetty-1.1.30/doc/faxrunqd.8in 2003-07-15 16:08:22.000000000 -0400 +@@ -3,7 +3,7 @@ + .SH NAME + faxrunqd \- daemon to send fax jobs queued by faxspool(1) + .SH SYNOPSIS +-.B faxrunqd [-v] [-d] [-l ] [-u ] [-V] ++.B faxrunqd [-v] [-d] [-D] [-l ] [-u ] [ -g ] [-V] + .SH DESCRIPTION + Runs in the background, and regularily checks the fax queue set up by + faxspool(1). Sends all jobs that are due, records results, and takes +@@ -59,7 +59,7 @@ + would do (send a mail, delete the JOB directory, execute a named program, + etc.). Both programs are fully compatible in this respect. + +-.B faxrunqd [-v] [-d] [-l ] [-u ] [-V] ++.B faxrunqd [-v] [-d] [-D] [-l ] [-u ] [ -g ] [-V] + .SH OPTIONS + .TP + .B -v +@@ -67,17 +67,22 @@ + .I faxrunqd + to write progress information to the log file. + .TP ++.B -D ++Tells ++.I faxrunqd ++to run in the background, as a daemon. ++.TP + .B -d + Tells + .I faxrunqd + to write debugging information to stdout and the log file (usually used +-together with -v) ++together with -v). + .TP + .B -l + Specifies the list of modem devices to use. Multiple devices are + separated with ':', e.g. '-l ttyS0:ttyS1'. + .TP +-.B -u ++.B -u + .I faxrunqd + can now (since 1.1.29) run as unprivileged user. If you start it as root + from /etc/inittab or from one of the /etc/rc* scripts, it's strongly +@@ -86,7 +91,13 @@ + .I faxrunqd + drop all its privileges at startup, and run as the specified user. Running + .I faxrunqd +-as root user might lead to security problems - don't do it. ++as root user might lead to security problems - don't do it. This ++parameter takes either a uid or a username as argument. ++.TP ++.B -g ++.I Same effect as above but for the group id. Indicates the group which ++should own the fax files. This parameter takes either a gid or a ++groupname as argument. + .TP + .B -V + print version number and exit --- mgetty-1.1.36.orig/debian/patches/12-fax_faxrunqd.in +++ mgetty-1.1.36/debian/patches/12-fax_faxrunqd.in @@ -0,0 +1,208 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30/fax/faxrunqd.in.orig 2003-09-13 11:04:12.000000000 +0000 ++++ mgetty-1.1.30-5.1/fax/faxrunqd.in 2003-09-13 11:12:47.000000000 +0000 +@@ -12,6 +12,10 @@ + my $rcs_id='RCS: $Id: faxrunqd.in,v 1.70 2005/02/17 13:52:33 gert Exp $'; + # + # Change Log: ++# ++# Debian 1.1.30-5.1 2003/07/20 Andreas Barth ++# Can specify group per commandline. ++# + # $Log: faxrunqd.in,v $ + # Revision 1.70 2005/02/17 13:52:33 gert + # do full "queue readdir()" only once per 180 seconds now, but use "stat(.)" to +@@ -73,6 +77,11 @@ + # a "low prio" job for phone number 123 could be attached to a high prio + # job to 123, and thus be sent before a high prio job to 456) + # ++# Debian 1.1.28-4 2002/11/27 18:32:23 Wolfgang Sourdeau ++# Quit quietly when received signal TERM or HUP since it is expected the ++# user knows what is happening already. The quit message is still written ++# into the logfile. ++# + # Revision 1.56 2002/01/04 17:52:42 gert + # pass sendfax exit code as 2nd argument to success/failure program + # +@@ -83,6 +92,9 @@ + # Revision 1.54 2001/12/16 14:26:25 gert + # stop queue handling if a file named 'stop' exists + # ++# Add a -D option to allow for running in the background as a Daemon ++# Philip Hands ++# + # Revision 1.53 2000/08/06 14:28:37 gert + # go from using $fax_spool_out/.last_run to VARRUNDIR/faxqueue_done + # +@@ -157,6 +169,8 @@ + # + # + require 5.004; ++ ++use Fcntl; + use strict; + use POSIX; + use IO::Handle; +@@ -174,10 +188,10 @@ + $mail='@MAILER@'; + + $faxrunq_cf='@CONFDIR@/faxrunq.config'; +-$fax_acct='@FAX_SPOOL@/acct.log'; +-$faxrd_log='@FAX_SPOOL@/faxrunqd.log'; ++$fax_acct='/var/log/mgetty/fax/acct.log'; ++$faxrd_log='/var/log/mgetty/fax/faxrunqd.log'; + +-$faxrd_pid='@FAX_SPOOL_OUT@/faxrunqd.pid'; ++$faxrd_pid='/var/run/mgetty-fax/faxrunqd.pid'; + $last_run='@FAX_SPOOL_OUT@/faxqueue_done'; + + +@@ -218,14 +232,16 @@ + # command line options + # + my $saved_cli=join( " ", @ARGV ); # print command line to LOG later +-use vars qw / $opt_d $opt_v $opt_V $opt_l $opt_u /; ++use vars qw / $opt_d $opt_v $opt_V $opt_l $opt_u $opt_g $opt_D /; + $opt_d = 0; # debug + $opt_v = 0; # verbose + $opt_V = 0; # print version number + $opt_l = ''; # ttys to use + $opt_u = ''; # user id to setuid() to +-getopts( 'dvVl:u:' ) || +- die "Valid options: -d (debug), -v (verbose), -l tty, -u uid, -V (version)\n"; ++$opt_g = ''; # group id to setgid() to ++$opt_D = 0; # daemon ++getopts( 'DdvVl:u:g:' ) || ++ die "Valid options: -D (daemon), -d (debug), -v (verbose), -l tty, -u uid, -g uid, -V (version)\n"; + + if ( $opt_d ) { $opt_v=1; } + +@@ -236,32 +252,63 @@ + mgetty+sendfax by Gert Doering + $rcs_id + +-config file read from '$faxrunq_cf' ++config read from '$faxrunq_cf' + + EOF + exit 0; + } + ++my $uid=$>; ++my $gid=$); ++ + if ( $opt_u ne '' ) # set user ID to $opt_u + { +- my ( $uid, $gid ) = ( getpwnam( $opt_u ) )[2,3]; ++ ( $uid, $gid ) = ( ( $opt_u =~ /^[0-9]+$/ ) ++ ? getpwuid( $opt_u ) ++ : getpwnam( $opt_u ) )[2,3]; + + if ( !defined($uid) || !defined($gid) ) + { die "$0: no such user: '$opt_u'\n"; } + + print "change user ID to '$opt_u' (numeric uid: $uid, gid: $gid)\n" + if $opt_d; +- $( = $) = $gid; +- $< = $> = $uid; +- +- if ( $> != $uid || $) != $gid ) +- { die "$0: can't set uid to $uid / gid to $gid: $!\n"; } + } ++ ++if ( $opt_g ne '' ) ++ { ++ $gid = ( ( $opt_g =~ /^[0-9]+$/ ) ++ ? getgrgid( $opt_g ) ++ : getgrnam( $opt_g ) )[2]; ++ die "$0: no such group: '$opt_g'\n" unless defined ($gid); ++ } ++ ++$( = $) = $gid; ++$< = $> = $uid; ++ ++if ( $> != $uid || $) != $gid ) ++ { die "$0: can't set uid to $uid / gid to $gid: $!\n"; } ++ + if ( $> == 0 ) # root check + { + print STDERR "$0: running with root privileges is not recommended\n"; + } + ++# fork as a daemon if invoked with -D ++if ( $opt_D ) { ++ my $pid = fork ; ++ die "Cannot fork: $!" unless defined $pid ; ++ if (0 == $pid) { ++ # Child process: become leader of a new session, lose STDIN, log STDOUT/ERR ++ POSIX::setsid(); ++ umask(022); ++ open(STDIN, "/dev/null") ; ++ open(STDOUT, ">&LOG") ; ++ open(STDERR, ">&LOG") ; ++ } else { ++ exit 0; # parent process ++ } ++} ++ + # + # startup... write PID file, make sure no other faxrunqd runs + # +@@ -296,7 +343,7 @@ + + $SIG{USR1} = \&signal_handler_USR1; # roll log file + my $roll_log_file_requested = 0; +-my $roll_level=3; # keep 3 old files around ++my $roll_level=7; # keep 7 old files around + + $SIG{HUP} = \&signal_handler_HUP; # graceful exit + my $graceful_exit_requested = 0; +@@ -396,7 +443,7 @@ + # + # open log file + # +-open( LOG, ">>$faxrd_log" ) || ++sysopen( LOG, "$faxrd_log", O_CREAT | O_APPEND | O_WRONLY, 0640 ) || + die "can't write log file '$faxrd_log'"; + LOG->autoflush(1); + print LOG "\n" . localtime() .": faxrunqd starting, pid=$$\n"; +@@ -604,7 +651,7 @@ + $roll_log_file_requested=0; + + # start new +- open( LOG, ">$faxrd_log" ) || ++ sysopen( LOG, "$faxrd_log", O_CREAT | O_APPEND | O_WRONLY, 0640 ) || + die "can't re-open log file '$faxrd_log'"; + LOG->autoflush(1); + print LOG localtime() .": -- new log file started --\n"; +@@ -1736,7 +1783,8 @@ + { + my $sig = shift; + +- print "\nfaxrunqd: signal handler: got signal $sig, goodbye...\n"; ++ print "\nfaxrunqd: signal handler: got signal $sig, goodbye...\n" ++ if ($sig ne 'TERM' && $sig ne 'HUP' && $sig ne 'USR2'); + print LOG "\nfaxrunqd: signal handler: got signal $sig, goodbye...\n"; + + # save tty statistics --- mgetty-1.1.36.orig/debian/patches/13-pending-fax_faxspool.in +++ mgetty-1.1.36/debian/patches/13-pending-fax_faxspool.in @@ -0,0 +1,250 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/fax/faxspool.in 2002-11-23 10:14:57.000000000 -0500 ++++ mgetty-1.1.30/fax/faxspool.in 2003-04-27 23:48:56.000000000 -0400 +@@ -107,7 +107,7 @@ + FAX_SPOOL=@FAX_SPOOL@ + FAX_SPOOL_OUT=@FAX_SPOOL_OUT@ + FAX_SEQ=$FAX_SPOOL_OUT/.Sequence +-FAX_SEQ_LOCKDIR=$FAX_SPOOL_OUT/locks ++FAX_SEQ_LOCKDIR=/var/lock/fax + FAX_SEQ_LOCK=$FAX_SEQ_LOCKDIR/LCK..seq + LAST_RUN=@FAX_SPOOL_OUT@/faxqueue_done + +@@ -192,7 +192,7 @@ + # + fs_cvt_pbm() + { +- pbm2g3 $1 >$2.001 ++ pbm2g3 "$1" >"$2".001 + } + + # +@@ -200,7 +200,7 @@ + # + fs_cvt_pgm() + { +- pgmtopbm $1 | pbm2g3 >$2.001 ++ pgmtopbm "$1" | pbm2g3 >"$2".001 + } + + # +@@ -208,7 +208,7 @@ + # + fs_cvt_ppm() + { +- ppmtopgm $1 | pgmtopbm | pbm2g3 >$2.001 ++ ppmtopgm "$1" | pgmtopbm | pbm2g3 >"$2".001 + } + + # +@@ -218,7 +218,7 @@ + # + fs_cvt_g3() + { +- g3cat $1 >$2.001 ++ g3cat "$1" >"$2".001 + } + + # +@@ -230,14 +230,14 @@ + fs_cvt_xwd() + { + REDUCE="cat" +- test X$3 = X-n && REDUCE="pnmscale -yscale 0.5" ++ test X"$3" = X-n && REDUCE="pnmscale -yscale 0.5" + +- xwdtopnm $1 |\ ++ xwdtopnm "$1" |\ + pnmscale -xysize 1728 2000 |\ + $REDUCE |\ + ppmtopgm |\ + pgmtopbm |\ +- pbm2g3 >$2.001 ++ pbm2g3 >"$2".001 + } + + # +@@ -248,14 +248,14 @@ + fs_cvt_gif() + { + REDUCE="cat" +- test X$3 = X-n && REDUCE="pnmscale -yscale 0.5" ++ test X"$3" = X-n && REDUCE="pnmscale -yscale 0.5" + +- giftopnm $1 |\ ++ giftopnm "$1" |\ + pnmscale -xysize 1728 2000 |\ + $REDUCE |\ + ppmtopgm |\ + pgmtopbm |\ +- pbm2g3 >$2.001 ++ pbm2g3 >"$2".001 + } + + # +@@ -266,14 +266,14 @@ + fs_cvt_tif() + { + REDUCE="cat" +- test X$3 = X-n && REDUCE="pnmscale -yscale 0.5" ++ test X"$3" = X-n && REDUCE="pnmscale -yscale 0.5" + +- tifftopnm $1 |\ ++ tifftopnm "$1" |\ + pnmscale -xysize 1728 2000 |\ + $REDUCE |\ + ppmtopgm |\ + pgmtopbm |\ +- pbm2g3 >$2.001 ++ pbm2g3 >"$2".001 + } + + # +@@ -282,11 +282,11 @@ + # + fs_cvt_lj() + { +- if [ X$3 = X-n ] ++ if [ X"$3" = X-n ] + then +- hp2log3 -r$2 <$1 ++ hp2log3 -r"$2" <"$1" + else +- hp2hig3 -r$2 <$1 ++ hp2hig3 -r"$2" <"$1" + fi + } + +@@ -298,10 +298,10 @@ + fs_cvt_ps() + { + driver="$GS_DRIVER_HI" +- test X$3 = X-n && driver="$GS_DRIVER_LO" ++ test X"$3" = X-n && driver="$GS_DRIVER_LO" + +- cat $1 | +- gs $driver -sOutputFile=$2%03d -dNOPAUSE -q -dSAFER - ++ cat "$1" | ++ gs $driver -sOutputFile="$2"%03d -dNOPAUSE -q -dSAFER - + } + + # +@@ -315,19 +315,19 @@ + # via Ghostscript: + + driver="$GS_DRIVER_HI" +- test X$3 = X-n && driver="$GS_DRIVER_LO" ++ test X"$3" = X-n && driver="$GS_DRIVER_LO" + +- gs $driver -sOutputFile=$2%03d -dNOPAUSE \ +- -- gslp.ps -fCourier-Bold10 -B $1 ++ gs $driver -sOutputFile="$2"%03d -dNOPAUSE \ ++ -- gslp.ps -fCourier-Bold10 -B "$1" + + ##### + # via hp2pbm: + # (convert "LF" to "CR+LF" via awk) + + # pgm=hp2hig3 +-# test X$3 = X-n && pgm=hp2log3 ++# test X"$3" = X-n && pgm=hp2log3 + # +-# $AWK '{ printf "%s\r\n", $0 }' $1 | $pgm -r$2 ++# $AWK '{ printf "%s\r\n", $0 }' "$1" | $pgm -r"$2" + + ##### + # via pbmtext (not really recommended): +@@ -335,13 +335,13 @@ + + ## Select appropriate font + # font=$PBMFONT_BODY_F +-# test X$3 = X-n && font=$PBMFONT_BODY_N ++# test X"$3" = X-n && font=$PBMFONT_BODY_N + # Determine how many pages text will be split in to. Uses default pagelen. +-# nr=`pgx < $1` ++# nr=`pgx < "$1"` + # Convert each page into a separate G3 file. Uses default pagelen (60). + # page=1 + # while [ $page -le $nr ]; do +-# pgx $page < $1 | pbmtext -font $font | pbm2g3 >$2.$page ++# pgx $page < "$1" | pbmtext -font $font | pbm2g3 >"$2".$page + # page=`expr $page + 1` + # done + } +@@ -353,7 +353,7 @@ + # + fs_cvt_dvi() + { +- if [ X$3 = X-n ] ++ if [ X"$3" = X-n ] + then + driver="$GS_DRIVER_LO" ; dvipscfg="-P dfaxlo" + else +@@ -363,18 +363,18 @@ + # if you do not have the dfaxlo(w)/dfaxhigh dvips modes configured, + # remove "$dvipscfg" from the dvips command line below [or configure them!] + +- dvips $dvipscfg $1 -o \ +- !"gs $driver -sOutputFile=$2%03d -dNOPAUSE -dSAFER -q -" ++ dvips $dvipscfg "$1" -o \ ++ !"gs $driver -sOutputFile="$2"%03d -dNOPAUSE -dSAFER -q -" + + # for those that only have the old "dvialw": + # + # dvialw <$file | +-# gs $driver -sOutputFile=$2%03d -dNOPAUSE -dSAFER -q - ++# gs $driver -sOutputFile="$2"%03d -dNOPAUSE -dSAFER -q - + + # for those that have dvi2ps and not dvips: + # + # dvi2ps -r -q $q | +-# gs $driver -sOutputFile=$2%03d -dNOPAUSE -dSAFER -q - ++# gs $driver -sOutputFile="$2"%03d -dNOPAUSE -dSAFER -q - + + } + +@@ -388,11 +388,10 @@ + fs_cvt_pdf() + { + driver="$GS_DRIVER_HI" +- test X$3 = X-n && driver="$GS_DRIVER_LO" ++ test X"$3" = X-n && driver="$GS_DRIVER_LO" + +- cat $1 | ++ cat "$1" | +- acroread -toPostScript | +- gs $driver -sOutputFile=$2%03d -dNOPAUSE -q -dSAFER - ++ gs $driver -sOutputFile="$2"%03d -dNOPAUSE -q -dSAFER - + } + + +@@ -577,7 +577,7 @@ + exit 3 + fi + +-phone=$1 ; shift ++phone="$1" ; shift + if expr "$phone" : "[-0-9TtPpWw,;]*$" >/dev/null ; then : + else + alias="$phone" --- mgetty-1.1.36.orig/debian/patches/14-frontends_X11_viewfax-2.5_Makefile +++ mgetty-1.1.36/debian/patches/14-frontends_X11_viewfax-2.5_Makefile @@ -0,0 +1,73 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.28.old/frontends/X11/viewfax/Makefile 2002-08-03 17:26:26.000000000 -0400 ++++ mgetty-1.1.28/frontends/X11/viewfax/Makefile 2002-08-03 17:30:26.000000000 -0400 +@@ -21,15 +21,16 @@ + + ####### Site-specific definitions ####### + # Destination directories and installation program for make install +-BINDIR = /usr/local/bin +-LIBDIR = /usr/local/lib +-MANDIR = /usr/local/man/man1 ++BINDIR = $(DESTDIR)/usr/bin ++LIBDIR = $(DESTDIR)/usr/lib ++DOCDIR = $(DESTDIR)/usr/share/doc/mgetty-viewfax ++MANDIR = $(DESTDIR)/usr/share/man/man1 + INSTALL = /usr/bin/install + RM = rm -f + # Location of help file +-HELP = \"$(LIBDIR)/viewfax.tif\" ++HELP = \"$(DOCDIR)/viewfax.tif\" + # optimisation level, debug etc +-OPT = -g -O2 -Wno-uninitialized -ansi -pedantic ++OPT = -O2 -Wno-uninitialized -ansi -pedantic + # C compiler and libraries + # vanilla sysv + #CC = cc +@@ -48,7 +49,7 @@ + #LIBS = + # linux + CC = gcc +-CFLAGS = $(OPT) -DHELPFILE=$(HELP) ++CFLAGS = -Wall $(OPT) -DHELPFILE=$(HELP) -I/usr/openwin/include + LDFLAGS = $(OPT) -L/usr/X11R6/lib + LIBS = + +@@ -63,7 +64,7 @@ + install: viewfax + $(INSTALL) -s -m 755 viewfax $(BINDIR) + $(INSTALL) -m 644 viewfax.man $(MANDIR)/viewfax.1 +- $(INSTALL) -m 644 viewfax.tif $(LIBDIR) ++ $(INSTALL) -m 644 viewfax.tif $(DOCDIR)/ + + D = viewfax-$(VERS) + FILES = $D/README $D/COPYING $D/ChangeLog $D/Imakefile $D/Makefile \ +@@ -82,7 +83,7 @@ + + shar:; (cd ..; shar -a -n$D -M -sfdc@cliwe.ping.de -c -o $D/part -l64 $(FILES)) + +-clean:; $(RM) *.o *~ core ++clean:; $(RM) *.o *~ core viewfax + + viewfax.o: faxexpand.h + faxinput.o: faxexpand.h --- mgetty-1.1.36.orig/debian/patches/23-samples_new_fax.mime4 +++ mgetty-1.1.36/debian/patches/23-samples_new_fax.mime4 @@ -0,0 +1,99 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.old/samples/new_fax.mime4 1999-04-17 06:38:50.000000000 -0400 ++++ mgetty-1.1.30/samples/new_fax.mime4 2003-07-01 23:45:07.000000000 -0400 +@@ -37,13 +37,14 @@ + PATH=/usr/sbin:/usr/local/bin:/usr/bin:/bin:$PATH + + # Select image type by uncommenting one of the following lines: +-#PBMTOX=pnmtopng ; MIME_TYPE="image/png" ; FILE_EXTN=png +-PBMTOX=ppmtogif ; MIME_TYPE="image/gif" ; FILE_EXTN=gif ++PBMTOX=pnmtopng ; MIME_TYPE="image/png" ; FILE_EXTN=png ++#PBMTOX=ppmtogif ; MIME_TYPE="image/gif" ; FILE_EXTN=gif + #PBMTOX=pnmtotiff ; MIME_TYPE="image/tiff" ; FILE_EXTN=tif + # PBM files may be huge + #PBMTOX=cat ; MIME_TYPE="image/x-portable-bitmap" ; FILE_EXTN=pbm + # compressed PBM files + #PBMTOX=gzip ; MIME_TYPE="application/octet-stream"; FILE_EXTN=pbm.gz ++#PBMTOX=NONE ; MIME_TYPE="image/fax-g3"; FILE_EXTN=g3 + + # The binaries we need; please check carefully !!! + BASENAME=basename +@@ -63,14 +64,23 @@ + + # Some miscellaneous data and filenames. + TMP=/tmp +-MAIL_MESS=$TMP/MESS_$$ +-ERRO_MESS=$TMP/ERRO_$$ +-IMAG_FILE=$TMP/TIFF_$$ +-MIME_MESS=$TMP/MAIL_$$ ++MAIL_MESS=`/bin/tempfile -pMESS_` ++ERRO_MESS=`/bin/tempfile -pERRO_` ++IMAG_FILE=`/bin/tempfile -pTIFF_` ++MIME_MESS=`/bin/tempfile -pMAIL_` ++if [ ! -f $MAIL_MESS ] ||\ ++ [ ! -f $ERRO_MESS ] ||\ ++ [ ! -f $IMAG_FILE ] ||\ ++ [ ! -f $MIME_MESS ] ++then ++ echo "Could not create one of the temporary files. Aborting..."; ++ exit 1; ++fi ++ + umask 077 + + # Clean up from previous invocations and trap errors +-$RM -f $MAIL_MESS $ERRO_MESS $IMAG_FILE $MIME_MESS ++# $RM -f $MAIL_MESS $ERRO_MESS $IMAG_FILE $MIME_MESS + trap "$RM -f $MAIL_MESS $ERRO_MESS $IMAG_FILE $MIME_MESS; exit" 0 1 2 15 + + # Essential lines to put into the header of a MIME mail. +@@ -86,7 +96,7 @@ + ATTACHMENT_ENDLINE="--attachment--" + + # Now we build our MIME mailheader using commandline arguments. +-$ECHO "Subject: incoming FAX from $2 with $3 pages" > $MAIL_MESS ++$ECHO "Subject: incoming FAX from $2 with $3 pages" >> $MAIL_MESS + $ECHO "$HEADERLINE_1" >> $MAIL_MESS + $ECHO "$HEADERLINE_2" >> $MAIL_MESS + $ECHO "" >> $MAIL_MESS +@@ -109,6 +119,9 @@ + # + for i in $@ + do ++if [ "$PBMTOX" = "NONE" ]; then ++ IMAG_FILE=$i ++else + # We use the second character in the filename to identify the + # resolution of our incoming fax, so we can easily scale the fax for + # display on a screen. +@@ -126,7 +139,8 @@ + # handle standard input correctly. + $CAT $i 2>> $ERRO_MESS \ + | $G3TOPBM $STRETCH 2>> $ERRO_MESS \ +- | $PBMTOX >> $IMAG_FILE 2>> $ERRO_MESS ++ | $PBMTOX > $IMAG_FILE 2>> $ERRO_MESS ++fi + # + # Now we put the header for each attachment into our MIME mail. + $ECHO "$ATTACHMENT_HEADERLINE_1" >> $MIME_MESS --- mgetty-1.1.36.orig/debian/patches/24-voice_include_paths.h +++ mgetty-1.1.36/debian/patches/24-voice_include_paths.h @@ -0,0 +1,37 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.27.orig/voice/include/paths.h ++++ mgetty-1.1.27/voice/include/paths.h +@@ -19,10 +19,10 @@ + * the device name. + */ + +-#define VGETTY_LOG_PATH "/var/log/vgetty.%s" ++#define VGETTY_LOG_PATH "/var/log/mgetty/vg_%s.log" + + /* + * Filename of the logfile for vm. + */ + +-#define VM_LOG_PATH "/var/log/vm.log" ++#define VM_LOG_PATH "/var/log/mgetty/vm.log" --- mgetty-1.1.36.orig/debian/patches/26-voice_libpvf_usr.c +++ mgetty-1.1.36/debian/patches/26-voice_libpvf_usr.c @@ -0,0 +1,38 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.27.orig/voice/libpvf/usr.c ++++ mgetty-1.1.27/voice/libpvf/usr.c +@@ -103,9 +103,13 @@ + } + } + gsm_encode(r, s, d); ++#if defined(old_USR_GSM_with_head_and_tail_bytes) + fwrite((char *)gsm_head, 2, 1, fd_out); ++#endif + fwrite((char *)d, sizeof(d), 1, fd_out); ++#if defined(old_USR_GSM_with_head_and_tail_bytes) + fwrite((char *)gsm_tail, 3, 1, fd_out); ++#endif + } + gsm_destroy(r); + return(OK); --- mgetty-1.1.36.orig/debian/patches/36-voice_voice.conf-dist +++ mgetty-1.1.36/debian/patches/36-voice_voice.conf-dist @@ -0,0 +1,33 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/voice/voice.conf-dist 2002-12-15 14:43:49.000000000 -0500 ++++ mgetty-1.1.30/voice/voice.conf-dist 2003-04-27 23:53:14.000000000 -0400 +@@ -51,7 +51,7 @@ + # + + phone_owner root +-phone_group phone ++phone_group voice + phone_mode 0660 + + # --- mgetty-1.1.36.orig/debian/patches/37-Makefile +++ mgetty-1.1.36/debian/patches/37-Makefile @@ -0,0 +1,135 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/Makefile 2002-12-16 08:08:23.000000000 -0500 ++++ mgetty-1.1.30/Makefile 2003-04-28 00:25:24.000000000 -0400 +@@ -164,7 +164,7 @@ + # + # if your systems doesn't have one, use the shell script that I provide + # in "inst.sh" (taken from X11R5). Needed on IRIX5.2 +-INSTALL=install -c -o bin -g bin ++INSTALL=install -c + #INSTALL=install -c -o root -g wheel # NeXT/BSD + #INSTALL=/usr/ucb/install -c -o bin -g bin # AIX, Solaris 2.x + #INSTALL=installbsd -c -o bin -g bin # OSF/1, AIX 4.1, 4.2 +@@ -172,11 +172,11 @@ + # + # prefix, where most (all?) of the stuff lives, usually /usr/local or /usr + # +-prefix=/usr/local ++prefix=$(DESTDIR)/usr + # + # prefix for all the spool directories (usually /usr/spool or /var/spool) + # +-spool=/var/spool ++spool=$(DESTDIR)/var/spool + # + # where the mgetty + sendfax binaries live (used for "make install") + # +@@ -188,11 +188,11 @@ + # + # where the font+coverpage files go + # +-LIBDIR=$(prefix)/lib/mgetty+sendfax ++LIBDIR=$(prefix)/lib/mgetty-fax + # + # where the configuration files (*.config, aliases, fax.allow/deny) go to + # +-CONFDIR=$(prefix)/etc/mgetty+sendfax ++CONFDIR=$(DESTDIR)/etc/mgetty + #CONFDIR=/etc/default/ + # + # +@@ -216,31 +216,33 @@ + # (it's possible to run faxrunq(d) as root, but the FAX_OUT_USER + # MUST NOT BE root or any other privileged account). + # +-FAX_OUT_USER=fax ++FAX_OUT_USER=uucp + # + # + # Where section 1 manual pages should be placed +-MAN1DIR=$(prefix)/man/man1 ++MAN1DIR=$(prefix)/share/man/man1 + # + # Where section 4 manual pages (mgettydefs.4) should be placed +-MAN4DIR=$(prefix)/man/man4 ++MAN4DIR=$(prefix)/share/man/man4 + # + # Section 5 man pages (faxqueue.5) +-MAN5DIR=$(prefix)/man/man5 ++MAN5DIR=$(prefix)/share/man/man5 + # + # Section 8 man pages (sendfax.8) +-MAN8DIR=$(prefix)/man/man8 ++MAN8DIR=$(prefix)/share/man/man8 + # + # Where the GNU Info-Files are located + # +-INFODIR=$(prefix)/info ++INFODIR=$(prefix)/share/info + # + # + # A shell that understands bourne-shell syntax + # Usually this will be /bin/sh or /usr/bin/sh, but bash or ksh are fine. + # (on some ultrix systems, you may need /bin/sh5 here) + # +-SHELL=/bin/sh ++# On Debian GNU/Linux, bash is a required package so we can use it to solve ++# bug #149851. ++SHELL=/bin/bash + # + # If your shell requires pre-posix syntax to disable traps ('trap 0' + # instead of 'trap - 0'), set this to "0" (very rarely needed) +@@ -275,7 +277,7 @@ + # please use the "mg.echo" program provided in the compat/ subdirectory. + # Set ECHO="mg.echo" and INSTALL_MECHO to mg.echo + # +-ECHO="echo" ++ECHO="echo -e" + # + # INSTALL_MECHO=mg.echo + +@@ -285,7 +287,7 @@ + + # To maintain security, I recommend creating a new group for + # users who are allowed to manipulate the recorded voice messages. +-PHONE_GROUP=phone ++PHONE_GROUP=voice + PHONE_PERMS=770 + + # Add -DNO_STRSTR to CFLAGS if you don't have strstr(). +@@ -586,7 +588,7 @@ + -test -d $(SBINDIR) || ( ./mkidirs $(SBINDIR) ; chmod 755 $(SBINDIR) ) + -mv -f $(SBINDIR)/mgetty $(SBINDIR)/mgetty.old + -mv -f $(SBINDIR)/sendfax $(SBINDIR)/sendfax.old +- $(INSTALL) -s -m 700 mgetty $(SBINDIR) ++ $(INSTALL) -s -m 755 mgetty $(SBINDIR) + $(INSTALL) -s -m 755 sendfax $(SBINDIR) + # + # data files + directories +@@ -738,3 +740,5 @@ + class1.o: class1.c mgetty.h ugly.h fax_lib.h tio.h class1.h + class1lib.o: class1lib.c mgetty.h ugly.h fax_lib.h tio.h class1.h + hyla_nsf.o: hyla_nsf.c mgetty.h ugly.h policy.h ++ ++.PHONY: install install.bin --- mgetty-1.1.36.orig/debian/patches/39-mgetty.cfg.in +++ mgetty-1.1.36/debian/patches/39-mgetty.cfg.in @@ -0,0 +1,34 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.27.orig/mgetty.cfg.in ++++ mgetty-1.1.27/mgetty.cfg.in +@@ -20,6 +20,9 @@ + # access the modem(s) with @SPEED@ bps + speed @SPEED@ + ++# use an alternate issue file, to avoid being bitten by linuxlogo ++issue-file /etc/issue.mgetty ++ + # use these options to make the /dev/tty-device owned by "uucp.uucp" + # and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!* + #port-owner uucp --- mgetty-1.1.36.orig/debian/patches/40-locks.c_bug153394 +++ mgetty-1.1.36/debian/patches/40-locks.c_bug153394 @@ -0,0 +1,82 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.28.old/locks.c 2001-01-06 12:46:34.000000000 -0500 ++++ mgetty-1.1.28/locks.c 2002-08-03 16:25:02.000000000 -0400 +@@ -394,9 +394,42 @@ + + #else /* not SVR4 */ + ++static char * unslash_name _P1 ( (device), ++ char *device ) ++{ ++ char *lock_device, *ldev_begin, *ldevice_orig; ++ ++ ldevice_orig = malloc( strlen (device) + 1 ); ++ sprintf( ldevice_orig, "%s", device ); ++ ++ lock_device = strchr( ldevice_orig, '/' ); ++ while (lock_device) ++ { ++ *lock_device = '_'; ++ lock_device = strchr( lock_device, '/' ); ++ } ++ ++ if ( *ldevice_orig == '_' ) ++ { ++ lock_device = strchr( ldevice_orig + 1, '_' ); ++ if (! lock_device) ++ lock_device = ldevice_orig; ++ lock_device++; ++ } ++ else ++ lock_device = ldevice_orig; ++ ++ ldev_begin = malloc( strlen( lock_device ) + 1 ); ++ sprintf( ldev_begin, "%s", lock_device ); ++ free( ldevice_orig ); ++ ++ return ldev_begin; ++} ++ + static char * get_lock_name _P2( (lock_name, device), + char * lock_name, char * device ) + { ++ char *lock; + #ifdef LOCKS_LOWERCASE + /* sco locking convention -> change all device names to lowercase */ + +@@ -425,10 +458,10 @@ + #endif /* LOCKS_LOWERCASE */ + + /* throw out all directory prefixes */ +- if ( strchr( device, '/' ) != NULL ) +- device = strrchr( device, '/' ) +1; +- +- sprintf( lock_name, LOCK, device); ++ ++ lock = unslash_name ( device ); ++ sprintf( lock_name, LOCK, lock ); ++ free ( lock ); + + return lock_name; + } --- mgetty-1.1.36.orig/debian/patches/41-ugly-redo-ring.c_bug128668 +++ mgetty-1.1.36/debian/patches/41-ugly-redo-ring.c_bug128668 @@ -0,0 +1,49 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/ring.c Thu Dec 5 21:29:10 2002 ++++ mgetty-1.1.30/ring.c Mon Sep 29 20:30:23 2003 +@@ -219,6 +219,8 @@ + char buf[BUFSIZE], ch, *p; + int i, w, r; + int rc = SUCCESS; ++boolean got_name = FALSE; ++boolean got_nmbr = FALSE; + boolean got_dle; /* for events (voice mode) */ + + lprintf( L_MESG, "wfr: waiting for ``RING''" ); +@@ -321,7 +324,14 @@ + * instead of waiting for the next "real" RING + * (but don't do this for V253 DRON/DROF modems!) + */ +- if ( strncmp( buf, "NMBR", 4 ) == 0 && drox_count == 0 ) { break; } ++ if ( strncmp( buf, "NMBR", 4 ) == 0 && drox_count == 0 ) { got_nmbr = TRUE; } ++ if ( strncmp( buf, "NAME", 4 ) == 0 ) { got_name = TRUE; } ++ ++ if ( got_nmbr && got_name ) break; /* got both name & number */ ++ ++ /* special case -> break; do not expect caller name */ ++ if ( got_nmbr && CallerId[0] == 'P' ) break; /* private */ ++ if ( got_nmbr && CallerId[0] == 'O' ) break; /* out of area */ + + /* V.253 ring cadences */ + if ( strncmp( buf, "DRON", 4 ) == 0 || --- mgetty-1.1.36.orig/debian/patches/43-moreinfo-cnd.c_bug112163 +++ mgetty-1.1.36/debian/patches/43-moreinfo-cnd.c_bug112163 @@ -0,0 +1,48 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/cnd.c 2002-11-05 16:43:04.000000000 -0500 ++++ mgetty-1.1.30/cnd.c 2003-04-28 00:07:35.000000000 -0400 +@@ -163,6 +166,23 @@ + if ( *p == '\'' || *p == '\"' || !isprint(*p) ) *p = ' '; + p++; + } ++ ++ if ( strcmp(cp->string,"+CLIP: ") == 0 ) { ++ char *q ; ++ ++ p = *(cp->variable) ; ++ q = *(cp->variable) ; ++ /* strip non digit charaters */ ++ while( ! isdigit(*p) ) p++; ++ /* shift only digit characters */ ++ while( isdigit(*p) ) { ++ *q=*p ; ++ p++ ; ++ q++ ; ++ } ++ *q = 0; ++ } ++ + } + lprintf(L_JUNK, "CND: found: %s", *(cp->variable)); + return; --- mgetty-1.1.36.orig/debian/patches/44-pending-faxexpand.h_bug169455 +++ mgetty-1.1.36/debian/patches/44-pending-faxexpand.h_bug169455 @@ -0,0 +1,46 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.28.old/frontends/X11/viewfax/faxexpand.h 2000-08-26 07:08:22.000000000 -0400 ++++ mgetty-1.1.28/frontends/X11/viewfax/faxexpand.h 2002-11-27 01:01:19.000000000 -0500 +@@ -17,6 +17,12 @@ + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + ++/* Wed, 27 Nov 2002 00:59:35 -0500, Wolfgang Sourdeau ++ : ++ - member "vres" of struct pagenode explicitly declared as "signed ++ char" instead of "char" for platforms where char is unsigned. ++ */ ++ + #include + + #if ULONG_MAX == 4294967295UL +@@ -69,7 +75,7 @@ + char inverse; /* black <=> white */ + char lsbfirst; /* bit order is lsb first */ + char orient; /* orientation - upsidedown, landscape, mirrored */ +- char vres; /* vertical resolution: 1 = fine */ ++ signed char vres; /* vertical resolution: 1 = fine */ + void (*expander)(struct pagenode *, drawfunc); + void *extra; /* used for Ximage */ + }; --- mgetty-1.1.36.orig/debian/patches/45-logfile.c +++ mgetty-1.1.36/debian/patches/45-logfile.c @@ -0,0 +1,72 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/logfile.c 2002-11-25 08:08:26.000000000 -0500 ++++ mgetty-1.1.30/logfile.c 2003-04-28 00:08:35.000000000 -0400 +@@ -56,10 +56,16 @@ + /* Most systems have these variables but do not declare them. On many + of those systems that _do_ declare them, it won't hurt */ + ++/* commented in by was@debian.org on Wed, 27 Nov 2002 01:15:11 -0500 ++ because sys_nerr and sys_errlist are deprecated. strerror() is used ++ instead below.*/ ++ ++#if 0 + #if !defined(__NetBSD__) && !defined( __FreeBSD__ ) && !defined(__OpenBSD__) && !defined(__GLIBC__) && !defined(__MACH__) + extern int sys_nerr; + extern char *sys_errlist[]; + #endif ++#endif + + /* Interactive Unix is a little bit braindead - does not have atexit(), + */ +@@ -209,6 +213,7 @@ + va_list pvar; + int errnr; + char * p; ++char *error_string; + static int first_open = TRUE; + + if ( level > log_level ) /* log level high enough? */ +@@ -325,12 +330,20 @@ + } + else /* ERROR or FATAL */ + { ++ error_string = strerror (errnr); ++ if ( error_string == NULL ) ++ { ++ if ( errno == EINVAL ) ++ error_string = ""; ++ else ++ error_string = ""; ++ } ++ + fprintf(log_fp, "\n%02d/%02d %02d:%02d:%02d %s %s: %s", + tm->tm_mon+1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec, + log_infix, ws, +- ( errnr <= sys_nerr ) ? sys_errlist[errnr]: +- "" ); ++ strerror (errnr)); + #ifdef SYSLOG + syslog( level == L_FATAL? LOG_ALERT: LOG_ERR, "%s: %m", ws ); + #endif --- mgetty-1.1.36.orig/debian/patches/47-doc_mgetty.texi-in +++ mgetty-1.1.36/debian/patches/47-doc_mgetty.texi-in @@ -0,0 +1,36 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.old/doc/mgetty.texi-in 2002-11-17 16:19:45.000000000 -0500 ++++ mgetty-1.1.30/doc/mgetty.texi-in 2003-07-05 22:23:20.000000000 -0400 +@@ -7,6 +7,11 @@ + @finalout + + @ifinfo ++@dircategory Communication ++@direntry ++* Mgetty: (mgetty). A smart modem replacement for getty. ++@end direntry ++ + This is the online documentation for the mgetty + sendfax + package. + --- mgetty-1.1.36.orig/debian/patches/51-pending-faxq-time +++ mgetty-1.1.36/debian/patches/51-pending-faxq-time @@ -0,0 +1,33 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Shows the spool-time with fq +## not integrated upstream, because needs gnu find + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/fax/faxq.in Sat Nov 23 19:57:59 2002 ++++ mgetty-1.1.30.orig/fax/faxq.in Sun Sep 28 17:59:40 2003 +@@ -100,6 +100,7 @@ + }' -` + $echo "$i:" + $echo "\tQueued by: $USER" ++ $echo "\t at: "`find $(dirname $i)/${PAGES%% *} -printf "%Ax %AH:%AM\n"` + if [ -z "$VERBTO" ] + then + $echo "\t to: $PHONE" --- mgetty-1.1.36.orig/debian/patches/52-pending-metamail +++ mgetty-1.1.36/debian/patches/52-pending-metamail @@ -0,0 +1,100 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +diff -urN mgetty-1.1.30~/samples/new_fax.mime3 mgetty-1.1.30/samples/new_fax.mime3 +--- mgetty-1.1.30~/samples/new_fax.mime3 2003-09-23 22:11:05.000000000 +1000 ++++ mgetty-1.1.30/samples/new_fax.mime3 2003-09-23 22:20:41.000000000 +1000 +@@ -13,8 +13,8 @@ + # image/x-fax-g3; viewfax -geometry +5+23 '%s'; test=test -n "$DISPLAY" + # image/x-fax-g3;; print=printfax '%s' + # +-# You need the program mmencode for base64 encoding of the fax data, +-# which you will find in your metamail distribution. ++# You need the program base64-encode for base64 encoding of the fax data, ++# which you will find in your mime-codecs package. + # + # (c) 1997-1998 Roland Rosenfeld + # +@@ -65,7 +65,7 @@ + echo "" >> $TMPMAIL + + # base64 encoder: +- mmencode -b $file >> $TMPMAIL ++ /usr/bin/perl -MMIME::Base64 -e '$_=join("",<>); print encode_base64($_)' < $file >> $TMPMAIL + + echo "" >> $TMPMAIL + done +@@ -75,4 +75,4 @@ + # Send out the created mail: + sendmail $ADMIN < $TMPMAIL + +-exit 0 +\ No newline at end of file ++exit 0 +diff -urN mgetty-1.1.30~/samples/new_fax.mime4 mgetty-1.1.30/samples/new_fax.mime4 +--- mgetty-1.1.30~/samples/new_fax.mime4 2003-09-23 22:11:05.000000000 +1000 ++++ mgetty-1.1.30/samples/new_fax.mime4 2003-09-23 22:21:09.000000000 +1000 +@@ -19,8 +19,8 @@ + # MIME tools as possible. + # + # This 'new_fax' only needs ' g32pbm', 'pnmscale' and 'pnmtotiff' from the +-# 'pbmplus' package, 'mmencode' from the 'multimail' packages, and the rest +-# is standard Unix tools. ++# 'pbmplus' package, 'base64-encode' from the 'mime-codecs' packages, and ++# the rest is standard Unix tools. + # It was tested with thsmail under Linux and PMMail under OS/2 as frontends. + + # This script is called when a message was recorded. +@@ -136,7 +135,7 @@ + # + # Here we do base64 encoding of out TIFF data and add the result + # into our MIME mail as attachment. +- $MMENCODE -b $IMAG_FILE >> $MIME_MESS 2>> $ERRO_MESS ++ /usr/bin/perl -MMIME::Base64 -e '$_=join("",<>); print encode_base64($_)' < $IMAG_FILE >> $MIME_MESS 2>> $ERRO_MESS + # + # To clean up temporary TIFF data. + $RM -f $IMAG_FILE +diff -urN mgetty-1.1.30~/samples/new_fax.tiff mgetty-1.1.30/samples/new_fax.tiff +--- mgetty-1.1.30~/samples/new_fax.tiff 2003-09-23 22:11:05.000000000 +1000 ++++ mgetty-1.1.30/samples/new_fax.tiff 2003-09-23 22:19:32.000000000 +1000 +@@ -12,7 +12,7 @@ + # script. The following script combines all received pages to one + # tiff-file which is sent to all recipients beeing in the alias for fax. + # Reading the fax is quite easy with Netscape when the tiffsurf-plugin is +-# installed. ++# installed. You need the metamail package for metasend. + # + # As the script may be usefull for someone I'll post it here. It's quite + # short (and perhaps not that elegant...), but for me it works great. +diff -urN mgetty-1.1.30~/voice/scripts/new_voice.craig_southern mgetty-1.1.30/voice/scripts/new_voice.craig_southern +--- mgetty-1.1.30~/voice/scripts/new_voice.craig_southern 2003-09-23 22:11:05.000000000 +1000 ++++ mgetty-1.1.30/voice/scripts/new_voice.craig_southern 2003-09-23 22:13:28.000000000 +1000 +@@ -50,7 +50,7 @@ + echo Content-Transfer-Encoding: base64 >> $tempfn + echo Content-Disposition: attachment\; filename=\"$pagefn\" >> $tempfn + echo "">> $tempfn +-/usr/bin/mimencode $outputfn >> $tempfn ++/usr/bin/perl -MMIME::Base64 -e '$_=join("",<>); print encode_base64($_)' < $outputfn >> $tempfn + + #rm -f $fn + rm -f $outputfn + --- mgetty-1.1.36.orig/debian/patches/54-location-makecoverpg +++ mgetty-1.1.36/debian/patches/54-location-makecoverpg @@ -0,0 +1,60 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.30.orig/doc/faxspool.1in 2003-10-29 23:40:11.000000000 +0100 ++++ mgetty-1.1.30/doc/faxspool.1in 2003-10-29 23:43:30.000000000 +0100 +@@ -65,5 +65,5 @@ + .I faxspool + can generate user-customizable fax cover pages. It is quite easy to set +-up: if a file @LIBDIR@/make.coverpg exists and is executable, it is run ++up: if a file @CONFDIR@/make.coverpg exists and is executable, it is run + with all relevant source/destination data on the command line, and its + output is sent as the first page of the resulting fax. If $HOME/.make.coverpg +@@ -137,7 +137,7 @@ + faxspool will simply queue the fax without cover page. + + The default cover page program used is $HOME/.make.coverpg; if this file +-doesn't exist @LIBDIR@/make.coverpg is used. (However, if $HOME/.make.coverpg ++doesn't exist @CONFDIR@/make.coverpg is used. (However, if $HOME/.make.coverpg + exists, but is not executable, no coverpage is used at all.) + .TP + .B -p +@@ -198,7 +198,7 @@ + default fax page header + .TP +-.B @LIBDIR@/make.coverpg ++.B @CONFDIR@/make.coverpg + program to create fax cover page (see coverpg(1)). + .TP + .B @CONFDIR@/faxspool.rules + program to control which file extentions are recognized (.txt, .ps, ...) +--- mgetty-1.1.30.orig/fax/faxspool.in 2003-10-29 23:40:11.000000000 +0100 ++++ mgetty-1.1.30/fax/faxspool.in 2003-10-29 23:41:07.000000000 +0100 +@@ -119,7 +119,7 @@ + # + # program that will generate fax coverpage (see "man coverpg") + # +-MAKE_COVER_PG=@LIBDIR@/make.coverpg ++MAKE_COVER_PG=@CONFDIR@/make.coverpg + + # + # local fax number (will be overriden by "sendfax.config" if set there!) --- mgetty-1.1.36.orig/debian/patches/60-fax-user +++ mgetty-1.1.36/debian/patches/60-fax-user @@ -0,0 +1,36 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: daemon and lp can set to any user + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.33.orig/fax/faxq-helper.c 2005-04-10 20:47:43.000000000 +0000 ++++ mgetty-1.1.33/fax/faxq-helper.c 2005-05-10 20:33:45.934619603 +0000 +@@ -589,7 +589,10 @@ + if ( strncmp(buf, "user ", 5) == 0 ) + { + user_seen=1; +- if ( real_user_id != ROOT_UID && ++ if ( real_user_id != ROOT_UID && real_user_id != 1 && real_user_id != 7 && ++ /* 1 = daemon, 7 = lp ++ * FIXME: This is not the best way to write it ++ */ + strcmp( buf+5, real_user_name ) != 0 ) + { + eout( "user name mismatch (%s <-> %s)\n", buf+5, real_user_name ); --- mgetty-1.1.36.orig/debian/patches/61-silentwav +++ mgetty-1.1.36/debian/patches/61-silentwav @@ -0,0 +1,40 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: silent pfvtowav, #344165 + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.33.orig/voice/libpvf/wav.c 2005-03-13 12:40:10.000000000 +0100 ++++ mgetty-1.1.33/voice/libpvf/wav.c 2006-04-16 22:36:48.991709176 +0200 +@@ -341,12 +341,14 @@ + wllong(ft, data_length); /* data chunk size: FIXUP(40) */ + + ++/* + fprintf(stderr, "Writing Wave file: %s format, %d channel%s, %ld samp/sec", + wav_format_str(wFormatTag), wChannels, + wChannels == 1 ? "" : "s", wSamplesPerSecond); + fprintf(stderr, " %ld byte/sec, %d block align, %d bits/samp\n", + wAvgBytesPerSec, wBlockAlign, wBitsPerSample); +- ++*/ ++ + return OK; + } + --- mgetty-1.1.36.orig/debian/patches/77-kFreeBSD +++ mgetty-1.1.36/debian/patches/77-kFreeBSD @@ -0,0 +1,66 @@ +#! /bin/sh -e +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Fix FTBFS for kFreeBSD. Closes: #347549 + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 +@DPATCH@ +--- mgetty-1.1.33.old/logfile.c 2005-11-09 10:26:41.000000000 +0100 ++++ mgetty-1.1.33.new/logfile.c 2005-11-09 10:32:35.000000000 +0100 +@@ -25,7 +25,7 @@ + #include + + #if !defined(linux) && !defined(BSD) && !defined(_SCO_DS) && \ +- !defined(SVR42) && !defined(solaris2) && !defined(_AIX) ++ !defined(SVR42) && !defined(solaris2) && !defined(_AIX) && !defined(__GLIBC__) + int openlog _PROTO(( char *, int, int )); + int syslog _PROTO(( int, char *, ... )); + #endif +--- mgetty-1.1.33.old/mgetty.h 2005-11-09 10:26:41.000000000 +0100 ++++ mgetty-1.1.33.new/mgetty.h 2005-11-09 10:28:50.000000000 +0100 +@@ -313,7 +313,7 @@ + extern char * mktemp _PROTO(( char * template )); + + #if !defined(linux) && !defined(SVR4) && !defined(__hpux) && \ +- !defined(BSD) && !defined(M_UNIX) && !defined(_AIX) ++ !defined(BSD) && !defined(M_UNIX) && !defined(_AIX) && !defined(__GLIBC__) + extern int getopt _PROTO(( int, char **, char * )); + #endif + extern int optind; +--- mgetty-1.1.33.old/tio.c 2005-11-09 10:26:41.000000000 +0100 ++++ mgetty-1.1.33.new/tio.c 2005-11-09 10:34:02.000000000 +0100 +@@ -45,7 +45,7 @@ + + /* some systems do not define all flags needed later, e.g. NetBSD */ + +-#ifdef BSD ++#if defined(BSD) || defined(__FreeBSD_kernel__) + # ifndef IUCLC + # define IUCLC 0 + # endif +--- mgetty-1.1.33.old/tio.h 2005-11-09 10:26:41.000000000 +0100 ++++ mgetty-1.1.33.new/tio.h 2005-11-09 10:31:10.000000000 +0100 +@@ -18,7 +18,7 @@ + #if !defined( POSIX_TERMIOS ) && !defined( BSD_SGTTY ) && !defined( SYSV_TERMIO) + # if defined(linux) || defined(sunos4) || defined(_AIX) || defined(BSD) || \ + defined(SVR4) || defined(solaris2) || defined(m88k) || defined(M_UNIX) ||\ +- defined(__sgi) ++ defined(__sgi) || defined(__GLIBC__) + # define POSIX_TERMIOS + # else + # define SYSV_TERMIO --- mgetty-1.1.36.orig/debian/patches/78-insecure-tmp-usage +++ mgetty-1.1.36/debian/patches/78-insecure-tmp-usage @@ -0,0 +1,40 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 78-insecure-tmp-usage by Nico Golde +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: fix insecure use of temporary file names + +@DPATCH@ +diff -urNad mgetty-1.1.36~/fax/faxspool.in mgetty-1.1.36/fax/faxspool.in +--- mgetty-1.1.36~/fax/faxspool.in 2008-09-13 16:32:53.000000000 +0200 ++++ mgetty-1.1.36/fax/faxspool.in 2008-09-13 16:33:11.000000000 +0200 +@@ -653,9 +653,9 @@ + # + # mkdir a directory in $TMP (or /tmp), convert input to G3 in there + # +-spooldir=${TMP:-/tmp}/$new_seq.$$.`date +%S` ++spooldir=`mktemp -t -d` + +-if ( umask 077 ; mkdir $spooldir ) ; then ++if [ $? -eq 0 ]; then + $echo "spooling to $spooldir (->$new_seq)..." + else + $echo "ERROR: can't create work dir '$spooldir', giving up" >&2 ; exit 6 +@@ -674,10 +674,13 @@ + # + if [ x$file = x- ] + then +- $echo "spooling $file (stdin)..." +- trap "rm /tmp/faxsp.$$" 0 +- cat - >/tmp/faxsp.$$ +- file=/tmp/faxsp.$$ ++ file=`mktemp /tmp/faxspool.XXXXXXXXX` ++ if test -z $file ++ then ++ $echo "ERROR: can't create work file, giving up" >&2 ; exit 6 ++ fi ++ trap "rm $file" 0 ++ cat - >$file + else + $echo "spooling $file..." + fi --- mgetty-1.1.36.orig/debian/patches/80-ppc64el +++ mgetty-1.1.36/debian/patches/80-ppc64el @@ -0,0 +1,22 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## by James Cowgill +## see #775518 +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: replace list of 64bit arches by __LP64__ + +@DPATCH@ +diff -ur a/mgetty.h b/mgetty.h +--- a/mgetty.h 2015-01-16 14:02:00.000000000 +0000 ++++ b/mgetty.h 2015-01-16 14:32:25.879672396 +0000 +@@ -196,9 +196,7 @@ + * union to use "void *" and "long", instead of "int" (see config.h). + * Same for Sparc Ultra machines [at least with SparcLinux] + */ +-#if defined(__alpha__) || defined(__sparc64__) || \ +- defined(__ia64__) || defined(__s390x__) || defined(__x86_64__) || \ +- defined(__powerpc64__) ++#ifdef __LP64__ + # define PTR_IS_LONG + #endif + --- mgetty-1.1.36.orig/debian/po/POTFILES.in +++ mgetty-1.1.36/debian/po/POTFILES.in @@ -0,0 +1 @@ +[type: gettext/rfc822deb] mgetty-fax.templates.master --- mgetty-1.1.36.orig/debian/po/cs.po +++ mgetty-1.1.36/debian/po/cs.po @@ -0,0 +1,72 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2005-10-23 11:36+0200\n" +"Last-Translator: Jan Outrata \n" +"Language-Team: Czech \n" +"Language: cs\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-2\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Spoutt faxrunqd bhem startu systmu?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Balek mgetty-fax obsahuje dmona (\"faxrunqd\"), kter automaticky " +"zaizuje zasln fax zaazench do fronty pomoc faxspool. Tento dmon a " +"nstroj faxrunq potebuj ke svmu bhu nleit nastaven /etc/mgetty/" +"faxrunq.config. Pokud plnujete pouvat faxrunqd, potvrte to." + +#~ msgid "New permission handling" +#~ msgstr "Nov zachzen s prvy" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Od verze 1.1.29 pouv mgetty-fax nov schma bezpenosti. Z toho " +#~ "vyplvaj njak zmny v zachzen s prvy uritch soubor a adres." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Do /usr/lib/mgetty-fax byl umstn nov nstroj se jmnem faxq-helper. " +#~ "Vlastn ho uivatel \"uucp\" a m nastaven SUID bit. Adres /var/spool/" +#~ "fax/outgoing nyn tak vlastn uucp a je ve vchozm nastaven pstupn " +#~ "pouze tomuto uivateli. Pokud chcete zmnit prva tohoto adrese " +#~ "(napklad, protoe dvujete svm uivatelm natolik, e jim dovolte " +#~ "st odchoz faxy), pouijte dpkg-statoverride." --- mgetty-1.1.36.orig/debian/po/da.po +++ mgetty-1.1.36/debian/po/da.po @@ -0,0 +1,75 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans# +# Developers do not need to manually edit POT or PO files. +# Claus Hindsgaul , 2004, 2005. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2005-07-19 11:45+0200\n" +"Last-Translator: Claus Hindsgaul \n" +"Language-Team: Danish \n" +"Language: da\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.9.1\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Vil du kre faxrunqd under systemetopstart?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Pakken mgetty-fax indeholder en dmon (\"faxrunqd\"), som automatisk kan " +"overtage afsendelsen af fax'er, der er lagt i k i faxken. Denne dmon og " +"vrktjet faxrunq krver at /etc/mgetty/faxrunq.config er sat ordentligt op " +"for at kunne kre. Hvis du regner med at kre faxrunqd skal du angive det " +"her." + +#~ msgid "New permission handling" +#~ msgstr "Ny hndtering af filrettigheder" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Siden version 1.1.29 har mgetty-fax brugt et nyt sikkerhedssystem. Det " +#~ "medfrer nogle ndringer i hndteringen af rettighederne til visse filer " +#~ "og mapper." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Et nyt vrktj med navnet faxq-helper er blevet lagt i /usr/lib/mgetty-" +#~ "fax. Det ejes af brugeren \"uucp\" og er setuid. Mappen /var/spool/fax/" +#~ "outgoing ejes nu ogs af uucp og kan som udgangspunkt kun tilgs af denne " +#~ "bruger. Hvis du nsker at ndre rettighederne til denne mappe (hvis du f." +#~ "eks. stoler nok p dine brugere til at lade dem lse udgende fax'er), s " +#~ "brug dpkg-statoverride." --- mgetty-1.1.36.orig/debian/po/de.po +++ mgetty-1.1.36/debian/po/de.po @@ -0,0 +1,75 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2004-04-19 11:16+0100\n" +"Last-Translator: Andreas Barth \n" +"Language-Team: German \n" +"Language: de\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "faxrunqd whrend des Systemstarts starten?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Das mgetty-fax Paket enthlt ein Systemprogramm (\"faxrunqd\"), das " +"automatisch Faxe versenden kann, die mit faxspool zum Senden vorgemerkt " +"werden. Damit Faxen mit diesem oder faxrunq versendet werden knnen, mu /" +"etc/mgetty/faxrunq.config angepasst werden. Bitte geben Sie an, ob faxrunqd " +"verwendet werden soll." + +#~ msgid "New permission handling" +#~ msgstr "Neue Zugriffsrechtbehandlung" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Seit Version 1.1.29 benutzt mgetty-fax ein neues Sicherheitsschema. " +#~ "Dieses impliziert einige nderungen bei der Behandlung der Zugriffsrechte " +#~ "von verschiedenen Dateien und Verzeichnissen." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Es wurde ein neues Hilfsprogramm namens faxq-helper in /usr/lib/mgetty-" +#~ "fax installiert. Es gehrt dem Benutzer \"uucp\" und ist setuid. Das " +#~ "Verzeichnis /var/spool/fax/outgoing gehrt nun ebenfalls uucp und ist nur " +#~ "fr diesen Benutzer zugnglich. Wenn Sie die Zugriffsrechte von diesem " +#~ "Verzeichnis ndern wollen (zum Beispiel weil Sie Ihren Benutzern genug " +#~ "trauen um sie ausgehende Faxe direkt lesen zu lassen), benutzen Sie dpkg-" +#~ "statoverride." --- mgetty-1.1.36.orig/debian/po/es.po +++ mgetty-1.1.36/debian/po/es.po @@ -0,0 +1,59 @@ +# mgetty po-debconf translation to Spanish +# Copyright (C) 2008 +# This file is distributed under the same license as the mgetty package. +# +# Changes: +# - Initial translation +# Francisco Javier Cuadrado +# +# Traductores, si no conoce el formato PO, merece la pena leer la +# documentación de gettext, especialmente las secciones dedicadas a este +# formato, por ejemplo ejecutando: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Equipo de traducción al español, por favor, lean antes de traducir +# los siguientes documentos: +# +# - El proyecto de traducción de Debian al español +# http://www.debian.org/intl/spanish/ +# especialmente las notas de traducción en +# http://www.debian.org/intl/spanish/notas +# +# - La guía de traducción de po's de debconf: +# /usr/share/doc/po-debconf/README-trans +# o http://www.debian.org/intl/l10n/po-debconf/README-trans +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty 1.1.36-1.4\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2008-09-28 20:21+0100\n" +"Last-Translator: Francisco Javier Cuadrado \n" +"Language-Team: Debian Spanish \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "¿Ejecutar «faxrunqd» durante el inicio del sistema?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"El paquete mgetty-fax contiene un demonio («faxrunqd») que puede encargarse " +"automáticamente de enviar los faxes encolados con «faxspool». Este demonio y " +"la herramienta «faxrunq» necesitan configurarse apropiadamente en el archivo " +"«/etc/mgetty/faxrunq.config» para poder ejecutarse. Si planea usar " +"«faxrunqd», por favor indíquelo." --- mgetty-1.1.36.orig/debian/po/eu.po +++ mgetty-1.1.36/debian/po/eu.po @@ -0,0 +1,40 @@ +# translation of mgetty-eu.po to Euskara +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# +# Piarres Beobide , 2008. +msgid "" +msgstr "" +"Project-Id-Version: mgetty-eu\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2008-10-23 21:00+0200\n" +"Last-Translator: Piarres Beobide \n" +"Language-Team: Euskara \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Exekutatu faxrunqd sistema abiaraztean?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"mgetty-fax paketeak faxspool bidez hilaran dauden fax-ak bidaltzeko ardura " +"artu dezakeen deabru bat (\"fazrunqd\") du. Deabru honek eta faxrunq " +"lanabesak /etc/mgetty/faxrunq.config behar dute behar bezala konfiguraturik " +"egon eta funtzionatu ahal izateko. Faxrunqd erabiltzea pentsatzen baduzu, " +"mesedez zehaztu ezazu." --- mgetty-1.1.36.orig/debian/po/fi.po +++ mgetty-1.1.36/debian/po/fi.po @@ -0,0 +1,39 @@ +# Copyright (C) 2009 +# This file is distributed under the same license as the mgetty package. +# +# Esko Arajärvi , 2009. +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2009-07-10 21:03+0300\n" +"Last-Translator: Esko Arajärvi \n" +"Language-Team: Finnish \n" +"Language: fi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: Lokalize 0.3\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Tulisiko faxrunqd käynnistää järjestelmän käynnistyessä?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Paketti mgetty-fax sisältää taustaohjelman ”faxrunqd”, jonka avulla voidaan " +"faxspoolilla jonoon laitetut faksit lähettää automaattisesti. Tämä " +"taustaohjelman ja faxrunq-työkalun asetukset tulee tehdä tiedostoon /etc/" +"mgetty/faxrunq.config. Valitse otetaanko ohjelma faxrunqd käyttöön." --- mgetty-1.1.36.orig/debian/po/fr.po +++ mgetty-1.1.36/debian/po/fr.po @@ -0,0 +1,76 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2004-04-19 11:16+0100\n" +"Last-Translator: Eric Madesclair \n" +"Language-Team: French \n" +"Language: fr\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Souhaitez-vous lancer faxrunqd au dmarrage du systme?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Le paquet mgetty-fax contient un dmon (faxrunqd) qui prend en charge " +"automatiquement l'envoi des fax avec faxspool. Ce dmon et l'utilitaire " +"faxrunq ont besoin que le fichier /etc/mgetty/faxrunq.config soit " +"correctement configur. Veuillez indiquer si vous souhaitez utiliser " +"faxrunqd." + +#~ msgid "New permission handling" +#~ msgstr "Note: Nouvelle gestion des droits" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Depuis la version 1.1.29, mgetty-fax utilise un nouveau schma de " +#~ "scurit. En consquence, des changements auront lieu dans la gestion des " +#~ "droits sur certains fichiers et rpertoires." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Un nouvel utilitaire nomm faxq-helper a t plac dans le rpertoire /" +#~ "usr/lib/mgetty-fax. Cet utilitaire a pour propritaire l'utilisateur " +#~ "uucp et le bit setuid est positionn. Le rpertoire /var/spool/" +#~ "fax/outoing appartient l'utilisateur uucp et par dfaut seul cet " +#~ "utilisateur y a accs. Si vous souhaitez modifier les droits pour ce " +#~ "rpertoire (par exemple, si vous faites suffisamment confiance vos " +#~ "utilisateurs pour leur laisser lire les fax sortants), veuillez utiliser " +#~ "la commande dpkg-statoverride." --- mgetty-1.1.36.orig/debian/po/gl.po +++ mgetty-1.1.36/debian/po/gl.po @@ -0,0 +1,38 @@ +# Galician translation of mgetty's debconf templates +# This file is distributed under the same license as the mgetty package. +# Jacobo Tarrio , 2007. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2007-02-27 11:54+0100\n" +"Last-Translator: Jacobo Tarrio \n" +"Language-Team: Galician \n" +"Language: gl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "¿Executar faxrunqd durante o inicio do sistema?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"O paquete mgetty-fax contén un servizo (\"faxrunqd\") que pode encargarse " +"automaticamente do envío dos faxes postos en cola con \"faxspool\". Este " +"servizo e a utilidade faxrunq precisan de que se configure do xeito " +"apropiado o ficheiro /etc/mgetty/faxrunq.config para poderen funcionar. Se " +"pensa empregar faxrunqd, indíqueo." --- mgetty-1.1.36.orig/debian/po/it.po +++ mgetty-1.1.36/debian/po/it.po @@ -0,0 +1,39 @@ +# Italian translation of the mgetty debconf template +# This file is distributed under the same license as the mgetty package +# Copyright (C) 2007 Free Software Foundation, Inc. +# Luca Monducci , 2007. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2007-01-05 20:02+0100\n" +"Last-Translator: Luca Monducci \n" +"Language-Team: Italian \n" +"Language: it\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Eseguire faxrunqd all'avvio del sistema?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Il pacchetto mgetty-fax contiene un demone (\"faxrunqd\") che si occupa " +"automaticamente dell'invio dei fax lasciati nell'apposito spool da faxspool. " +"Per poter funzionare correttamente il demone e il programma faxrunq devono " +"essere configurati tramite il file /etc/mgetty/faxrunq.config. Indicare se " +"si ha intenzione di utilizzare faxrunqd." --- mgetty-1.1.36.orig/debian/po/ja.po +++ mgetty-1.1.36/debian/po/ja.po @@ -0,0 +1,74 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty 1.1.30-10\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2004-07-11 12:38+0900\n" +"Last-Translator: Hideki Yamane \n" +"Language-Team: Japanese \n" +"Language: ja\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=EUC-JP\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "faxrunqd 򥷥ƥ൯ư˵ưޤ?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"mgetty-fax ѥåϡfaxspool ί줿 FAX ưŪǽˤ" +"ǡ (\"faxrunqd\") ޤǤޤΥǡ faxrunq 桼ƥƥ" +"ϡư뤿Ŭڤꤷ /etc/mgetty/faxrunq.config եɬפ" +"ޤfaxrunqd Ȥͽ꤬ϡΤ褦ꤷƤ" + +#~ msgid "New permission handling" +#~ msgstr "ѡߥåΰʤޤ" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "С 1.1.29 ꡢmgetty-fax Ͽʥƥ¤Ȥ褦" +#~ "ʤäƤޤϡΥեȥǥ쥯ȥΥѡߥåΰ" +#~ "ФѹǤ" + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "faxq-helper Ȥ̾ο桼ƥƥ /usr/lib/mgetty-fax " +#~ "Ƥޤ \"uucp\" 桼ͭΤΤǡsetuid ƤޤƱ" +#~ "ͤ /var/spool/fax/outoing ǥ쥯ȥ uucp 桼νͭˤʤꡢɸ" +#~ "ϤΥ桼ΤߤǤ褦ˤʤäƤޤΥǥ쥯ȥΥѡ" +#~ "ߥåѹ (ȤС FAX ɤΤ­ۤ" +#~ "桼ꤷƤ)dpkg-statoverride ޥɤȤäƤ" --- mgetty-1.1.36.orig/debian/po/nl.po +++ mgetty-1.1.36/debian/po/nl.po @@ -0,0 +1,78 @@ +# translation of mgetty_1.1.35-2_templates.po to Dutch +# This file is distributed under the same license as the mgetty package. +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans# +# Developers do not need to manually edit POT or PO files. +# +# This is an unofficial translation +# Kurt De Bree \n" +"Language-Team: Dutch \n" +"Language: nl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.1\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Wilt u faxrunqd uitvoeren tijdens het opstarten van het systeem?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Het 'mgetty-fax'-pakket bevat een achtergronddienst (\"faxrunqd\") die " +"automatisch het verzenden van de faxen, die door faxspool in de buffer " +"geplaatst werden, kan beheren. Om deze achtergronddienst en het 'faxrunq'-" +"hulpprogramma te laten werken moeten deze juist geconfigureerd worden met " +"het bestand /etc/mgetty/faxrunq.config. Indien u 'faxrunq' wilt gebruiken, " +"dient u met 'ja' te bevestigen." + +#~ msgid "New permission handling" +#~ msgstr "Wijziging m.b.t. toegangsrechten" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Sinds versie 1.1.29 gebruikt mgetty een nieuw veiligheidsschema. Bij een " +#~ "aantal mappen en bestanden zijn de toegangsrechten gewijzigd." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Een nieuw hulpprogramma, 'faxq-helper' genaamd, is geplaatst onder /usr/" +#~ "lib/mgetty-fax. De gebruiker \"uucp\" is eigenaar en de 'setuid'-bit is " +#~ "ingeschakeld. De map /var/spool/fax/outgoing wordt nu ook beheerd door " +#~ "\"uucp\" en is standaard enkel toegankelijk voor deze gebruiker. Wanneer " +#~ "u bijvoorbeeld de andere gebruikers genoeg vertrouwt om de uitgaande " +#~ "faxen te lezen, kunt u de rechten aanpassen met 'dpkg-statoverride'." --- mgetty-1.1.36.orig/debian/po/pt.po +++ mgetty-1.1.36/debian/po/pt.po @@ -0,0 +1,66 @@ +# Portuguese translation of mgetty debconf messages. +# Copyright (C) 2007 Carlos Lisboa +# This file is distributed under the same license as the mgetty package. +# Carlos Lisboa , 2007. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2007-02-07 20:20+0000\n" +"Last-Translator: Carlos Lisboa \n" +"Language-Team: Portuguese \n" +"Language: pt\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Correr o faxrunqd durante o arranque do sistema?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"O pacote mgetty-fax contém um daemon (\"faxrunqd\") que pode, " +"automaticamente, tomar conta do envio dos faxes em espera com o faxspool. " +"Este daemon e o utilitário necessitam que o /etc/mgetty/faxrunq.config " +"esteja devidamente configurado para correrem. Se planeia usar o faxrunqd, " +"indique que o deseja." + +#~ msgid "New permission handling" +#~ msgstr "Manuseamento de nova permissão" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Desde a versão 1.1.29, o mgetty-fax usa um novo esquema de segurança. " +#~ "Isto implica algumas alterações no manuseamento de permissões de " +#~ "determinados ficheiros e directórios." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Um novo utilitário chamado faxq-helper foi colocado em /usr/lib/mgetty-" +#~ "fax. O seu dono é o utilizador \"uucp\" e é setuid. O directório /var/" +#~ "spool/fax/outoing possui também como dono o uucp e é apenas acessível, " +#~ "por omissão por esse utilizador. Se desejar modificar as permissões deste " +#~ "directório (por exemplo, porque confia o suficiente nos seus utilizadores " +#~ "para que eles possam ler os faxes a serem enviados) use dpkg-statoverride." --- mgetty-1.1.36.orig/debian/po/pt_BR.po +++ mgetty-1.1.36/debian/po/pt_BR.po @@ -0,0 +1,42 @@ +# mgetty Brazilian Portuguese translation +# Copyright (C) 2011 THE mgetty's PACKAGE COPYRIGHT HOLDER +# This file is distributed under the same license as the mgetty package. +# Felipe Duarte , 2011. +# Eder L. Marques , 2015. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2015-08-13 10:25-0300\n" +"Last-Translator: Eder L. Marques \n" +"Language-Team: Brazilian Portuguese \n" +"Language: pt_BR\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n!=1);\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Executar faxrunqd durante a inicialização do sistema?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"O pacote mgetty-fax contém um daemon (\"faxrunqd\") que pode automaticamente " +"ter no comando o envio de faxes enfileirados com o faxspool. Este daemon e o " +"utilitário faxrunq precisam que o arquivo /etc/mgetty/faxrunq.config seja " +"configurado apropriadamente para para que possam ser executados. Se você " +"planeja usar faxrunqd, por favor indique isso." --- mgetty-1.1.36.orig/debian/po/ru.po +++ mgetty-1.1.36/debian/po/ru.po @@ -0,0 +1,42 @@ +# translation of ru.po to Russian +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# +# Yuri Kozlov , 2008. +msgid "" +msgstr "" +"Project-Id-Version: ru\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2008-08-11 21:40+0400\n" +"Last-Translator: Yuri Kozlov \n" +"Language-Team: Russian \n" +"Language: ru\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Запускать faxrunqd при включении компьютера?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Пакет mgetty-fax содержит службу (\"faxrunqd\"), которая может автоматически " +"отправлять факсы, отправленные с помощью программы faxspool. Для работы " +"данной службы и утилиты faxrunq требуются правильные настройки в файле /etc/" +"mgetty/faxrunq.config. Если вы планируете использовать faxrunqd, обратите на " +"это внимание." --- mgetty-1.1.36.orig/debian/po/sv.po +++ mgetty-1.1.36/debian/po/sv.po @@ -0,0 +1,77 @@ +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +# Developers do not need to manually edit POT or PO files. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty 1.1.33-3\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2005-10-15 22:07+0100\n" +"Last-Translator: Daniel Nylander \n" +"Language-Team: Swedish \n" +"Language: sv\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=iso-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Poedit-Language: Swedish\n" +"X-Poedit-Country: SWEDEN\n" +"X-Poedit-SourceCharset: iso-8859-1\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Kra faxrunqd vid systemets uppstart?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Paketet mgetty-fax innehller en daemon (\"faxrunqd\") som automatiskt kan " +"ta hand om sndningen av fax som kats upp av faxspool. Daemonen och " +"verktyget faxrunq behver /etc/mgetty/faxrunq.config att vara lmpligt " +"konfigurerad fr att kunna kra. Om du planerar att anvnda faxrunqd, vlj " +"d detta." + +#~ msgid "New permission handling" +#~ msgstr "Ny hantering av rttigheter" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Frn och med version 1.1.29 anvnder mgetty-fax ett nytt skerhetsschema. " +#~ "Detta innebr ngra ndringar i hanteringen av rttigheter fr vissa " +#~ "filer och mappar." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Ett nytt verktyg med namnet faxq-helper har placerats i /usr/lib/mgetty-" +#~ "fax. Den gs av anvndaren \"uucp\" och r setuid. Mappen /var/spool/fax/" +#~ "outgoing gs numera av uucp ocks och bara den anvndaren har tillgng " +#~ "dr som standard. Om du vill modifiera rttigheterna fr denna mapp (till " +#~ "exempel fr att du litar p dina anvndare tillrckligt bra fr att lta " +#~ "dom lsa utgende fax), anvnd d dpkg-statoverride." --- mgetty-1.1.36.orig/debian/po/templates.pot +++ mgetty-1.1.36/debian/po/templates.pot @@ -0,0 +1,34 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" --- mgetty-1.1.36.orig/debian/po/vi.po +++ mgetty-1.1.36/debian/po/vi.po @@ -0,0 +1,65 @@ +# Vietnamese Translation for mgetty. +# Copyright © 2005 Free Software Foundation, Inc. +# Clytie Siddall , 2005. +# +msgid "" +msgstr "" +"Project-Id-Version: mgetty 1.1.33-2\n" +"Report-Msgid-Bugs-To: aba@not.so.argh.org\n" +"POT-Creation-Date: 2007-08-13 10:42+0000\n" +"PO-Revision-Date: 2005-06-10 15:07+0930\n" +"Last-Translator: Clytie Siddall \n" +"Language-Team: Vietnamese \n" +"Language: vi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0\n" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "Run faxrunqd during system startup?" +msgstr "Chạy «faxrunqd» trong khi khởi động hệ thống không?" + +#. Type: boolean +#. Description +#: ../mgetty-fax.templates.master:1001 +msgid "" +"The mgetty-fax package contains a daemon (\"faxrunqd\") that can " +"automatically take in charge the sending of the faxes spooled with faxspool. " +"This daemon and the faxrunq utility need /etc/mgetty/faxrunq.config to be " +"configured appropriately in order to run. If you plan to use faxrunqd, " +"please indicate so." +msgstr "" +"Gói tin «mgetty-fax» chứa một trình nền (dæmon) được gọi là «faxrunqd» mà có " +"thể tự động quản lý việc gửi các fax do «faxspool» tập hợp. Để chạy cả hai " +"trình nền này và tiện ích «faxrunq» đều thì phải cấu hình tập tin «/etc/" +"mgetty/faxrunq.config» một cách thích hợp. Nếu bạn định sử dụng «faxrunqd», " +"hãy ngụ ý như thế tại đây." + +#~ msgid "New permission handling" +#~ msgstr "Cách quản lý quyền hạn" + +#~ msgid "" +#~ "Since version 1.1.29, mgetty-fax is using a new security scheme. This " +#~ "implies some changes in the permission handling of certain files and " +#~ "directories." +#~ msgstr "" +#~ "Từ phiên bản 1.1.29, trình mgetty-fax có dùng một lược đồ bảo mật mới. Vì " +#~ "vậy, cách quản lý quyền hạn đã thay đổi cho một số tập tin và thư mục đều." + +#~ msgid "" +#~ "A new utility with name faxq-helper has been placed into /usr/lib/mgetty-" +#~ "fax. It is owned by user \"uucp\" and is setuid. The directory /var/spool/" +#~ "fax/outoing is now owned by uucp as well and is only accessible to that " +#~ "user by default. If you want to modify the permissions of this directory " +#~ "(for example because you trust your users enough to let them read " +#~ "outgoing faxes), please use dpkg-statoverride." +#~ msgstr "" +#~ "Một tiện ích mới tên «faxq-helper» đã được chèn vào «/usr/lib/mgetty-" +#~ "fax». Người dùng «uucp» sở hữu nó, và đã lập nó «setuid». Người dùng " +#~ "«uucp» cũng sở hữu thư mục «/var/spool/fax/outoing» thì mặc định là chỉ " +#~ "người dùng ấy có thể truy cập nó. Nếu bạn muốn sửa đổi quyền hạn cho thư " +#~ "mục này (lấy thí dụ, vì bạn muốn cho phép các người dùng đọc mọi fax đã " +#~ "gửi đi) thì hãy sử dụng «dpkg-statoverride»." --- mgetty-1.1.36.orig/debian/policy.h +++ mgetty-1.1.36/debian/policy.h @@ -0,0 +1,638 @@ +#ident "@(#)policy.h 4.3 97/06/05 Copyright (c) Gert Doering" + +/* this is the file where all configuration defaults for mgetty / sendfax + * are specified. + * + * defaults are used if no values are given in the config file(s). + * config file values can be overridden by command line options. + * + * see mgetty.texi/mgetty.info for a description of the configuration files. + */ + +/* main mgetty configuration file + */ +#define MGETTY_CONFIG "mgetty.config" + +/* sendfax configuration file + * + * if path doesn't start with "/", it's relative to CONFDIR (Makefile) + * if not defined, no configuration file is read (saves a few kbytes) + */ +#define SENDFAX_CONFIG "sendfax.config" + + +/* login dispatcher config file (for mgetty) + * + * In this file, you can configure which "login" program (default /bin/login) + * to call for what user name. + * + * You could use it to call "uucico" for all users starting with "U*" + * (works only with Taylor UUCP 1.04 with my patch), for AutoPPP calls + * being properly dispatched to pppd, or to call a fido mailer for fido + * calls (only if AutoPPP and/or FIDO support are compiled in, see below)... + * + * If you want to call /bin/login for all data calls, do not define this + * + * See the samples in the example login.config file (built from login.cfg.in). + * + * WARNING: make sure that this file isn't world-accessable (SECURITY!) + * + * If this doesn't start with "/", it's relative to CONFDIR. + */ +#define LOGIN_CFG_FILE "login.config" + +/* default login program + * + * If LOGIN_CFG_FILE is not defined, or does not exist, or doesn't + * have a default entry, this program is called for user logins. + * Normally, this is "/bin/login", just a few systems put "login" + * elsewhere (e.g. Free/NetBSD in "/usr/bin/login"). + */ +#define DEFAULT_LOGIN_PROGRAM "/bin/login" + +/* FidoNet mailer support + * + * If you want to support incoming FidoNet calls, define FIDO. + * + * (If you don't know what this is, you don't want it) + */ +#define FIDO + +/* AutoPPP-Support + * + * If you want to auto-detect incoming PPP calls (with authorization done + * by the pppd, i.e. via CHAP or PAP), define AUTO_PPP. + * Not needed if PPP callers want to get a real "login:" + * prompt first. Don't forget to activate the /AutoPPP/ line in login.config! + */ +#define AUTO_PPP + +/* callback config file + * + * this file controls the operation of the optional "callback" program. + * how callback works, is explained in detail in mgetty.texi. You need + * to set LOGIN_CFG_FILE (see above) to use callback from mgetty. + * + * If this path does not start with "/", it's relative to CONFDIR. + */ +#define CALLBACK_CONFIG "callback.config" + + +/* if this file exists, it can be used to control what callers + * are allowed in. If undefined, the functionality is omitted. + * It will work only if your modem supports it. Check the modem manual. + * For Rockwell-Based modems, add #CID=1 to MODEM_INIT_STRING, for + * ZyXELs use S40.2=1. + * If the path doesn't start with "/", it's relative to CONFDIR. + */ +#define CNDFILE "dialin.config" + + +/* If you want to use /etc/gettydefs to set tty flags, define this + * I recommend against it, I suspect some bugs lingering in that code + * (and one doesn't really need it in a normal setup anyway). + */ +/* #define USE_GETTYDEFS */ + +/* Name of the "gettydefs" file (used only if USE_GETTYDEFS is set) + */ +#define GETTYDEFS "/etc/gettydefs" + +/* If no gettydefs "tag" is specified on the command line, use + * this setting (from GETTYDEFS) as default (only if compiled with + * USE_GETTYDEFS set) + */ +#define GETTYDEFS_DEFAULT_TAG "n" + + +/* access modes */ + +/* user id of the "uucp" user. The tty device will be owned by this user, + * so parallel dial-out of uucico will be possible + */ +#define DEVICE_OWNER "root" +/* group id that the device is chown()ed to. If not defined, the + * primary group of "DEVICE_OWNER" is used. + */ +#define DEVICE_GROUP "dialout" + +/* access mode for the line while getty has it - it should be accessible + * by uucp / uucp, but not by others (imagine someone dialing into your + * system and using another modem to dial to another country...) + */ +#define FILE_MODE 0660 + +/* security: optionally, mgetty can system() this, to kill any dangling + * processes on the current tty. A %s is replaced with the tty device. + * + * Under most circumstances, this is not needed. You might want + * to use it if you offer dial-in services with shell accounts to people + * that you don't trust (they might try to abuse your modems, and this + * will stop a number of attacks). + */ +/* #define EXEC_FUSER "exec fuser -k -f %s >/dev/null 2>&1" */ + + +/* logging */ + +/* system console - if a severe error happens at startup, mgetty writes + * a message to this file and aborts + * On SCO, this may be /dev/syscon! + */ +#define CONSOLE "/dev/console" + +/* Name of the mgetty log file + * e.g. "/usr/spool/log/mgetty.log.%s" or "/tmp/log_mg.%s" + * a "%s" will be replaced by the device name, e.g. "tty2a" + * + * if the directory does not exist, the log file goes to CONSOLE (!) + */ +#define LOG_PATH "/var/log/mgetty/mg_%s.log" + +/* Default log error level threshold. Possible error levels are + * L_FATAL, L_ERROR, L_WARN, L_AUDIT, L_MESG, L_NOISE, L_JUNK (see mgetty.h) + */ +#define LOG_LEVEL L_MESG + +/* Whether "\n"s in the modem response should start a new line + * in the logfile + */ +/* #define LOG_CR_NEWLINE */ + +/* System administrator - if a severe error happens (lprintf called + * with log_level L_FATAL) and writing to CONSOLE is not possible, + * the logfile will be mailed to him + */ +#define ADMIN "root" + +/* Syslog + * + * If you want logging messages of type L_AUDIT, L_ERROR and L_FATAL + * to go to the "syslog", define this. + * mgetty will use the facility "LOG_AUTH", and the priorities + * LOG_NOTICE, LOG_ERR and LOG_ALERT, respectively. + */ +#define SYSLOG + +/* Syslog facility + * + * This is the facility mgetty uses for logging. Ususally, this will be + * LOG_AUTH, but on some systems, this may not exist, try LOG_DAEMON + * instead (or look into the syslog manpage for available options) + */ +#define SYSLOG_FC LOG_AUTH + +/* login stuff */ + +/* System name - printed at login prompt + * If you do not define this, the uname() call will be used + */ +/* #define SYSTEM "greenie" */ + +/* Login prompt + * The "@", "\\D" and "\\T" escapes will be replaced by SYSTEM, the + * current date and time, respectively. + * override with "-p " switch + */ +#define LOGIN_PROMPT "@ login: " + +/* On SVR4, maybe on other systems too, you can cause the 'login' program + * to prompt with the same string as mgetty did, instead of the standard + * "login:" prompt. The string will be passed to the 'login' program + * in the environment variable TTYPROMPT. + * This is done by putting "login" into a special (brain-dead) "ttymon"- + * compatibility mode. In that mode, mgetty doesn't ask for a login name + * at all, so mgetty won't work if you enable that feature and your + * login program doesn't support it. (You can see if it doesn't work + * if the user gets a double login prompt or none at all). + * + * This feature automatically disables FIDO and AutoPPP support! + * + * This feature can also be used to directly start "other" applications, + * like a BBS software or similar things, after the modem has connected + * (login.config would then be used to specify what program to run). + * + * To use this feature, define ENV_TTYPROMPT. + */ +/* #define ENV_TTYPROMPT */ + +/* Some very old terminals can only generate UPPERCASE letters. + * Traditional getty variants detect this, and then set the + * corresponding termio(s) flags to convert upper/lower case letters + * "on the fly". Mgetty can do it, but since this is hardly + * needed nowadays, the default is off. + */ +/* #define DO_LCUC_MAP */ + +/* Maximum time before login name has to be entered (in seconds) + * (after that time a warning will be issued, after that, the call is + * dropped). To disable that feature, do not define it. + */ +#define MAX_LOGIN_TIME 240 + +/* nologin file + * + * If that file exists, a ringing phone won't be answered (see manual). + * "%s" will be replaced by the device name. + */ +#define NOLOGIN_FILE "/etc/nologin.%s" + + +/* misc */ + +/* how to find mgetty.. + * + * If you define this, mgetty will create a file with the given name and + * put its process ID in it. A "%s" will be replaced by the device id. + * + * Depending on your system, "/var/run/mgetty.%d" might be a good place. + */ +#define MGETTY_PID_FILE "/var/run/mg-pid.%s" + +/* Path for the lock files. A %s will be replaced with the device name, + * e.g. tty2a -> /usr/spool/uucp/LCK..tty2a + * Make sure that this is the same file that your uucico uses for + * locking! + */ + +/* for a few systems, you can just take those defaults and be happy */ +#if defined (SVR4) || defined(sunos4) +# define LOCK_PATH "/var/spool/locks" +# define LOCK "/var/spool/locks/LCK..%s" +#else +# ifdef sgi +# define LOCK "/usr/spool/locks/LCK..%s" +# endif +# ifdef _AIX +# define LOCK "/etc/locks/LCK..%s" +# endif +# ifdef NeXT +# define LOCK "/usr/spool/uucp/LCK/LCK..%s" +# endif +# ifdef linux +# define LOCK "/var/lock/LCK..%s" +# endif +#endif + +/* if your system isn't listed above, change that line here */ +#ifndef LOCK +#define LOCK "/var/lock/LCK..%s" +#endif + +/* Set this to "1" if your system uses binary lock files (i.e., the pid + * as four byte integer in host byte order written to the lock file) + * If it is "0", HDB locking will be used - the PID will be written as + * 10 byte ascii, with a trailing newline + * (Just check "LOCK" while uucico or pcomm or ... are running to find + * out what lock files are used on your system) + * On NeXT systems, you must set this to "1". + */ +#define LOCKS_BINARY 0 + +/* Lower case locks - change the last character of the device name + * to lowercase for locking purposes. + * + * If you're using a SCO Unix system with those "tty1a/tty1A" device + * pairs, you'll have to define this. + */ +/* #define LOCKS_LOWERCASE */ + +/* Change _all_ characters to lowercase (currently no system uses this) */ +/* #define LOCKS_ALL_LOWERCASE */ + + +/* the default speed used by mgetty - override it with "-s " + * + * WARNING: this is a bit tricky, since some modems insist on going to + * 19200 bps when in fax mode. So, if fax receiving with a port speed of + * something else doesn't work, try experimenting with FAX_RECV_SWITCHBD, + * and if that doesn't help, try DEFAULT_PORTSPEED 19200 + * + * WARNING2: Speeds higher than 38400 aren't supported on all platforms, + * and sometimes you have to use "50" to get 57600 or so! + */ +#define DEFAULT_PORTSPEED 38400 + +/* the modem initialization string + * + * the default string should set up most hayes compatible modems into a + * fairly sane state (echo on, verbose reports on, quiet off, reset on + * DTR toggle on), but it doesn't set any flow control options (because + * that's done differently on each modem, look into your manual for commands + * like &H3, &K4, \Q6 or similar things) or protocols. + * + * You can change the initialization sequence with the "init-chat" keyword + * in "mgetty.config". + * + * If you need delays, specify them as "\\d", if you want to send a + * backslash ('\'), give it as "\\\\". + * + * Very IMPORTANT: make sure that the modem assigns the DCD line properly, + * usually this is done with the AT&C1 command! + * + * The modem must answer with "OK" (!!!) - otherwise, use "init-chat". + */ +#define MODEM_INIT_STRING "AT" + +/* command termination string + * + * for most modems, terminating the AT... command with "\r" is + * sufficient and "\r\n" also works without doing harm. + * Unfortunately, for the Courier HST, you've to use *only* \r, + * otherwise ATA won't work (immediate NO CARRIER), and for some + * (old) ZyXELs, you have to use \r\n (no OK otherwise). + * So, try one, and if it doesn't work, try the other. + */ +#define MODEM_CMD_SUFFIX "\r" + +/* "keep alive" + * + * mgetty can periodically check whether the modem is still alive + * by issueing an "AT\r" command and checking for the "OK" + * Define here, in seconds, how often mgetty should check. For normal + * reliable modems, once an hour should be sufficient... + * If you use "-1", or don't define this at all, mgetty won't check. + */ +#define MODEM_CHECK_TIME 3600 + + +/* modem mode + * + * DEFAULT_MODEMTYPE specifies the default way mgetty+sendfax handle a + * faxmodem. You have four choices: + * "data" - data only, no faxing available (for sendfax, equal to "auto") + * "cls2" - use AT+FCLASS=2 + * "c2.0" - use AT+FCLASS=2.0 + * "auto" - try "2.0", then "2", then fall to "data". + * + * Normally, you can leave this to "auto", but if you have a modem that + * can do class 2.0 and class 2, and 2.0 doesn't work, then you could try + * setting it to "cls2". + * You can override this define with the "-C " switch. + */ +#define DEFAULT_MODEMTYPE "auto" + + +/* some modems are a little bit slow - after sending a response (OK) + * to the host, it will take some time before they can accept the next + * command - specify the amount needed in data mode here (in + * milliseconds). Normally, 50 ms should be sufficient. (On a slow + * machine it may even work without any delay at all) + * + * Be warned: if your machine isn't able to sleep for less than one + * second, this may cause problems. + */ +#define DO_CHAT_SEND_DELAY 50 + /* and this is the delay before sending each command while in fax mode + */ +#define FAX_COMMAND_DELAY 50 + +/* incoming faxes will be chown()ed to this uid and gid. + * if FAX_IN_GROUP is undefined, the group of ...OWNER is used. + */ +#define FAX_IN_OWNER "root" +#define FAX_IN_GROUP "fax" + +/* incoming faxes will be chmod()ed to this mode + * (if you do not define this, the file mode will be controlled by + * mgetty's umask) + */ +#define FAX_FILE_MODE 0660 + +/* FLOW CONTROL + * + * There are basically two types of flow control: + * - hardware flow control: pull the RTS/CTS lines low to stop the other + * side from spilling out data too fast + * - sofware flow control: send an Xoff-Character to tell the other + * side to stop sending, send an Xon to restart + * obviously, use of Xon/Xoff has the disadvantage that you cannot send + * those characters in your data anymore, but additionally, hardware flow + * control is normally faster and more reliable + * + * mgetty can use multiple flow control variants: + * FLOW_NONE - no flow control at all (absolutely not recommended) + * FLOW_HARD - use RTS/CTS flow control (if available on your machine) + * FLOW_SOFT - use Xon/Xoff flow control, leave HW lines alone + * FLOW_BOTH - use both types simultaneously, if possible + * + * Note that few operating systems allow both types to be used together. + * + * mgetty won't (cannot!) notice if your settings don't work, but you'll + * see it yourself: you'll experience character losses, garbled faxes, + * low data throughput,..., if the flow control settings are wrong + * + * If in doubt what to use, try both and compare results. + * (if you use FAS or SAS with the recommended settings, FLOW_HARD is a + * "don't care" since the driver will use RTS/CTS anyway) + * + * If you use an atypical system, check whether tio_set_flow_control in + * tio.c does the right thing for your system. + */ + +/* This is the flow control used for normal data (login) connections + * Set it to FLOW_HARD except in very special cases. + */ +#define DATA_FLOW FLOW_HARD + +/* This is the flow control used for incoming fax connections + * Wrong settings will result in missing lines or erroneous lines + * in most of the received faxes. + * Most faxmodems expect Xon/Xoff, few honour the RTS line. + */ +#define FAXREC_FLOW FLOW_HARD | FLOW_SOFT + +/* And this is for sending faxes + * + * Wrong settings here will typically result in that the first few + * centimeters of a transmitted fax look perfect, and then (the buffer + * has filled up), the rest is more or less illegible junk. + * For most faxes, this has to be FLOW_SOFT, though the Supra and ZyXEL + * modems will (sometimes) do hardware flow control, too. Try it. + * + * If you see a large number of [11] and [13] characters in the sendfax + * log file, your modem is propably doing software flow control - and + * you've definitely set FAXSEND_FLOW to FLOW_HARD... + * + * Some versions of SCO Unix have a "weird" serial driver that will only + * do half duplex hardware flow control. You will then run into the problem + * that fax sending will time out after the first page sent (no ACK received) + * and fail if FLOW_HARD is used. Use FLOW_SOFT instead. + */ +#define FAXSEND_FLOW FLOW_HARD | FLOW_SOFT + +/* if your faxmodem switches port bit rate just after sending the "+FCON" + * message to the host, define this to contain the baudrate used. (Not + * important if you have the portspeed set to this value anyway). + * + * Most Rockwell-based modems need FAX_RECV_SWITCHBD 19200. + * ZyXELs do *not* need this, except if explicitely told to do so. + * + * You can see if this is set wrong if mgetty gets the "+FCON" response, + * starts the fax receiver, and times out waiting for OK, receiving + * nothing or just junk. + */ +/* #define FAX_RECV_SWITCHBD 19200 */ + +/* some genius at US Robotics obviously decided that the above method + * of switching baud rates is broken, and came up with something new + * --- broken as well (why bother switching rates at all?) --- this + * and other USR Courier Fax follies will be handled by enabling the + * following define (if you have an USR faxmodem that does *not* need + * this, please send me a mail!) + * It seems as if the newest V.34 modems do not need this anymore, please + * try it out... + */ +/* #define FAX_USRobotics */ + +/* name of the logfile for outgoing faxes (e.g. /var/log/sendfax.log) + */ +#define FAX_LOG "/var/log/mgetty/fax/sendfax.log" + +/* local station ID (your fax number) + * 20 character string, most faxmodem allow all ascii characters 32..127, + * but some do only allow digits and blank + * AT+FLID=? should tell you what's allowed and what not. + */ +#define FAX_STATION_ID " " + +/* ------ sendfax-specific stuff follows here -------- */ + +/* the baudrate used for *sending* faxes. ZyXELs can handle 38400, + * SUPRAs (and many other rockwell-based faxmodems) can not. + * I recommend 38400, since 19200 may be to slow for 14400 bps faxmodems! + */ +#define FAX_SEND_BAUD 38400 + +/* switch baud rate after +FCLASS=2 + * + * some weird modems require that you initialize the modem with one + * baud rate (e.g. 2400 or 9600 for cheap 2400+fax modems, or `smart' + * modems that insist on staying locked to 38400 (ELSA!)), but switch + * to another baud rate, typically 19200, immediately after receiving + * the "AT+FCLASS=2" command. + * + * If the following is defined, sendfax will switch to the speed given + * here after sending AT+FCLASS=2. + * + * Only try fiddling with this if sendfax times out during modem + * initialization, receiving junk instead of "OK" or "ERROR" (logfile!) + */ +/* #define FAX_SEND_SWITCHBD 19200 */ + +/* this is the command to set the modem to use the desired flow control. + * For hardware handshake, this could be AT&H3 for the ZyXEL, &K3 for + * Rockwell-Based modems or AT\\Q3&S0 for Exar-Based Modems (i.e. some GVC's) + * If you don't want extra initalization, do not define it. + * Don't forget the "AT"! + */ +/* #define FAX_MODEM_HANDSHAKE "AT&H3" */ + +/* This is the modem command used for dialing. The phone number will + * get appended right after the string. Normally, "ATD" or "ATDP" should + * suffice, but in some situations (company telephone systems) you might + * need something like "ATx0DT0wP" (switch of dial-tone recognition, tone- + * dial a "0", wait for dial-tone, pulse dial the rest) + */ +#define FAX_DIAL_PREFIX "ATD" + +/* When sending a fax, if the other side says "page bad, retrain + * requested", sendfax will retry the page. Specifiy here the maximum + * number of retries (I recommend 3) before hanging up. + * + * If you set it to "0", sendfax will *never* retransmit a page (only + * do this if you know that your modem returns +FPTS:2 even if the + * page arrived properly, but be warned - you wont' be able to react + * properly to transmission errors!) + * + * See also the description of the "max-tries" and "max-tries-continue" + * settings in the sendfax config file. + */ +#define FAX_SEND_MAX_TRIES 3 + +/* the device(s) used for faxing + * multiple devices can be separated by ":", e.g. "tty1a:tty2a" + * (with or without leading /dev/) + * If you don't adapt this for your needs, sendfax won't run (you can + * set it from the sendfax.config file, though)! + */ +#define FAX_MODEM_TTYS "ttyS1" + +/* some modems, notably some GVC modems, all USR models, and the german + * telecom approved ZyXEL EG+ have the annoying behaviour of lowering + * and raising the DCD line during the pre- and post-page handshake + * (when sending faxes). + * + * If your modem does this, sendfax will terminate immediately after + * starting to send the first page, or between the first and second + * page, and the fax log file will show something like + * "read failed, I/O error". + * + * If you define this, sendfax will (try to) ignore that line + */ + +/* #define FAX_SEND_IGNORE_CARRIER */ + +/* Xon or not? + * + * the first issues of the class 2 drafts required that the program waits + * for an Xon character before sending the page data. Later versions + * removed that. Sendfax can do both, default is to wait for it. + * + * If you get an error message "... waiting for XON" when trying to + * send a fax, try this one. Some ELSA modems are know to need it. + * + * ** THIS OPTION IS OBSOLETE ** + * ** use "modem-quirks 0x08" in sendfax.config instead ** + */ + + +/* define mailer that accepts destination on command line and mail text + * on stdin. For mailers with user friendly interfaces, (such as mail, + * mailx, elm), include an appropriate subject line in the command + * definition. If using a mail agent (such as sendmail), that reads + * mail headers, define NEED_MAIL_HEADERS. + */ +#ifdef SVR4 +# define MAILER "/usr/bin/mailx -s 'Incoming facsimile message'" +#else +# ifdef _AIX +# define MAILER "/usr/sbin/sendmail" +# define NEED_MAIL_HEADERS +# endif +# ifdef M_UNIX /* SCO */ +# define MAILER "/usr/lib/mail/execmail" +# define NEED_MAIL_HEADERS +# endif +#endif + +#ifndef MAILER +# define MAILER "/usr/sbin/sendmail" +# define NEED_MAIL_HEADERS +#endif + +/* where to send notify mail about incoming faxes to + * (remember to create an mail alias if no such user exists!) + */ +#define MAIL_TO "root" + +/* after a fax has arrived, mgetty can call a program for further + * processing of this fax. + * + * (e.g.: printing of the fax, sending as MIME mail, displaying in an X + * window (the latter one could be tricky) ...) + * + * It will be called as: + * "" <#pgs> ... + * + * Define the name of this program here + * If you don't want this type of service, do not define it at all + * Absolute path name has to be used here! + */ +#define FAX_NOTIFY_PROGRAM "/etc/mgetty/new_fax" + +/* default minimum space required on spooling partition for receiving a FAX + * (in KILObytes) + */ +#define MINFREESPACE 1024 + --- mgetty-1.1.36.orig/debian/purge +++ mgetty-1.1.36/debian/purge @@ -0,0 +1,2 @@ +/var/log/mgetty +/etc/mgetty --- mgetty-1.1.36.orig/debian/rules +++ mgetty-1.1.36/debian/rules @@ -0,0 +1,238 @@ +#!/usr/bin/make -f +# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess. +# +# modifications for use as mgetty's rules file +# Copyright (c) 1998 Philip Hands +# Taken over in 2001-2003 by Wolfgang Sourdeau +# major reworks in 2003 by Andreas Barth + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +PKG_VER = $(shell perl -e 'print <> =~ /\((.*)\)/' debian/changelog) +#PKG_UPVER = $(shell perl -e 'print <> =~ /\((.*)-[^-]*\)/' debian/changelog) +PACKAGE=mgetty + +VFDIR = frontends/X11/viewfax + +DEBIAN_DIR = $(shell pwd)/debian + +PVFTOOLS = autopvf pvfsine pvffilter rmdtopvf pvfcut pvftormd basictopvf \ + pvfspeed pvfmix pvfecho pvftovoc pvftoau voctopvf \ + pvfnoise lintopvf pvffft pvftowav pvftobasic wavtopvf pvfreverse \ + pvffile rmdfile pvfamp pvftolin + +build: + +include /usr/share/dpatch/dpatch.make + +build: patch + dh_testdir + + touch start-build + -cp $(DEBIAN_DIR)/policy.h $(DEBIAN_DIR)/voice-defs.h . + + $(MAKE) + $(MAKE) vgetty + cd contrib; $(MAKE) g3toxwd g3tolj + cd $(VFDIR); $(MAKE) + + touch build + +build-arch: build + +build-indep: build + +clean: unpatch + dh_testdir + dh_testroot + -if [ -f start-build ]; then \ + rm -f start-build; \ + rm -f build; \ + $(MAKE) clean; \ + $(MAKE) fullclean; \ + rm -f contrib/g3tolj contrib/g3toxwd; \ + rm -f fax/faxq-helper fax/faxq-helper.o \ + rm -f policy.h voice-defs.h; \ + cd $(VFDIR);$(MAKE) clean; \ + fi + -rm frontends/X11/viewfax/viewfax + + debconf-updatepo + + dh_clean + +binary-indep: build + dh_testdir -i + dh_testroot -i + dh_prep -i + dh_installdirs -i +# Add here commands to install the files into debian/mgetty + install -m644 callback/README \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/README.callback + install -m644 $(VFDIR)/README \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/README.viewfax + install -m644 voice/doc/* \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/voice + install -m644 voice/Perl/* \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/voice/examples/perl + install -m644 voice/scripts/* \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/voice/examples/scripts + cp $(DEBIAN_DIR)/inittab \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/examples/inittab.DEBIAN + +# dh_movefiles -i --sourcedir=debian/mgetty + dh_installdocs -i +# FAQ + cp -a contrib frontends doc/*.txt doc/mgetty.texi doc/modems.db \ + doc/fhng-codes $(DEBIAN_DIR)/win95.ppp BUGS FTP \ + README.1st THANKS TODO \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/ + -rm -rf $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/frontends/X11/viewfax/ +# dh_installexamples -i + cp -a samples/* \ + $(DEBIAN_DIR)/mgetty-docs/usr/share/doc/mgetty/examples + chmod +x debian/fixpaths.pl + debian/fixpaths.pl + dh_installmenu -i +# dh_installinit -i +# dh_installcron -i +# dh_installmanpages -i + dh_installinfo -i + dh_installchangelogs -i + dh_compress -i + dh_fixperms -i + dh_installdeb -i + dh_gencontrol -i + dh_md5sums -i + dh_builddeb -i + +binary-arch: build +# dh_testversion + dh_testdir -a + dh_testroot -a + dh_prep -a + dh_installdirs -a + +# Mgetty install + mkdir -p $(DEBIAN_DIR)/mgetty/etc/logrotate.d + cp $(DEBIAN_DIR)/mgetty.logrotate $(DEBIAN_DIR)/mgetty/etc/logrotate.d/mgetty + $(MAKE) install DESTDIR=$(DEBIAN_DIR)/mgetty + $(MAKE) vgetty-install DESTDIR=$(DEBIAN_DIR)/mgetty-voice + cp voice/ChangeLog \ + $(DEBIAN_DIR)/mgetty-voice/usr/share/doc/mgetty/changelog.voice + +# Enforce debian standard for location of getty's + mv $(DEBIAN_DIR)/mgetty/usr/sbin/?getty \ + $(DEBIAN_DIR)/mgetty/sbin/ + +# And usr/sbin stuff + mv $(DEBIAN_DIR)/mgetty/usr/bin/faxrunq \ + $(DEBIAN_DIR)/mgetty-fax/usr/bin/ + mv $(DEBIAN_DIR)/mgetty/usr/sbin/faxrunqd \ + $(DEBIAN_DIR)/mgetty-fax/usr/sbin/ + mkdir -p $(DEBIAN_DIR)/mgetty-fax/etc/logrotate.d + cp $(DEBIAN_DIR)/mgetty-fax.logrotate $(DEBIAN_DIR)/mgetty-fax/etc/logrotate.d/mgetty-fax + mv $(DEBIAN_DIR)/mgetty/usr/bin/newslock $(DEBIAN_DIR)/mgetty-fax/usr/bin/ + +# man pages for vm and newslock + pod2man --section=1 --center="mgetty" $(DEBIAN_DIR)/vm.pod $(DEBIAN_DIR)/mgetty-voice/usr/share/man/man1/vm.1 + cp $(DEBIAN_DIR)/newslock.1 $(DEBIAN_DIR)/mgetty-fax/usr/share/man/man1/ + + po2debconf -e utf8 debian/mgetty-fax.templates.master > debian/mgetty-fax.templates + +# Separate pvftools from mgetty-voice + mkdir -p $(DEBIAN_DIR)/mgetty-pvftools/usr/bin \ + $(DEBIAN_DIR)/mgetty-pvftools/usr/share/man/man1 + mv -f $(DEBIAN_DIR)/mgetty-voice/usr/share/man/man1/pvf.1 \ + $(DEBIAN_DIR)/mgetty-pvftools/usr/share/man/man1/; \ + for i in $(PVFTOOLS); do \ + mv -f $(DEBIAN_DIR)/mgetty-voice/usr/bin/$$i \ + $(DEBIAN_DIR)/mgetty-pvftools/usr/bin/; \ + mv -f $(DEBIAN_DIR)/mgetty-voice/usr/share/man/man1/$$i.1 \ + $(DEBIAN_DIR)/mgetty-pvftools/usr/share/man/man1/; \ + done + +# Contrib stuff + install -s contrib/g3toxwd contrib/g3tolj $(DEBIAN_DIR)/mgetty-fax/usr/bin + install -p -m644 contrib/g3toxwd.1 contrib/g3tolj.1 $(DEBIAN_DIR)/mgetty-fax/usr/share/man/man1/ + +# viewfax + mkdir -p $(DEBIAN_DIR)/mgetty-viewfax/usr/share/doc/mgetty-viewfax + cd $(VFDIR);$(MAKE) install DESTDIR=../../../debian/mgetty-viewfax + +# callback stuff + install -s callback/callback $(DEBIAN_DIR)/mgetty/usr/sbin + +# Setup a default configuration + cp *.config $(DEBIAN_DIR)/faxheader $(DEBIAN_DIR)/mgetty/etc/mgetty + cp $(DEBIAN_DIR)/issue.mgetty $(DEBIAN_DIR)/mgetty/etc/issue.mgetty + install samples/new_fax.mime4 \ + $(DEBIAN_DIR)/mgetty-fax/etc/mgetty/new_fax + cp voice/voice.conf-dist \ + $(DEBIAN_DIR)/mgetty-voice/etc/mgetty/voice.conf + cp fax/etc-magic \ + $(DEBIAN_DIR)/mgetty-fax/usr/share/doc/mgetty/fax.magic + cp voice/magic.voice \ + $(DEBIAN_DIR)/mgetty-voice/usr/share/doc/mgetty/voice.magic + rm $(DEBIAN_DIR)/mgetty/usr/bin/g3topbm + +# Make appropriate symlinks. + ln -s mgetty $(DEBIAN_DIR)/mgetty-fax/usr/share/doc/mgetty-fax + ln -s mgetty $(DEBIAN_DIR)/mgetty-voice/usr/share/doc/mgetty-voice + +# move fax.1 manpage to mgetty-fax.1 + mv $(DEBIAN_DIR)/mgetty/usr/share/man/man1/fax.1 \ + $(DEBIAN_DIR)/mgetty/usr/share/man/man1/mgetty-fax.1 + +# And continue with debian control files + dh_movefiles -a --sourcedir=debian/mgetty + rm -rf $(DEBIAN_DIR)/mgetty/usr/info $(DEBIAN_DIR)/mgetty/usr/lib $(DEBIAN_DIR)/mgetty/var/spool/fax/outgoing + dh_installdocs -pmgetty + dh_installdocs -pmgetty-viewfax + dh_installdocs -pmgetty-voice + dh_installdocs -pmgetty-fax + dh_installdocs -pmgetty-pvftools + -rm -f $(DEBIAN_DIR)/mgetty-fax/usr/share/doc/mgetty/copyright + -rm -f $(DEBIAN_DIR)/mgetty-voice/usr/share/doc/mgetty/copyright + + # move the config templates to the right place + mv $(DEBIAN_DIR)/mgetty/etc/mgetty/* $(DEBIAN_DIR)/mgetty/usr/share/mgetty/templates/etc/ + # faxheader faxrunq.config sendfax.config + mv $(DEBIAN_DIR)/mgetty-fax/etc/mgetty/*config $(DEBIAN_DIR)/mgetty-fax/etc/mgetty/faxheader $(DEBIAN_DIR)/mgetty-fax/usr/share/mgetty/templates/etc/ + mv $(DEBIAN_DIR)/mgetty-fax/etc/mgetty/faxspool.rules.sample $(DEBIAN_DIR)/mgetty-fax/usr/share/doc/mgetty/fax/ + mv $(DEBIAN_DIR)/mgetty-voice/etc/mgetty/* $(DEBIAN_DIR)/mgetty-voice/usr/share/mgetty/templates/etc/ + + rm -rf $(DEBIAN_DIR)/mgetty/usr/share/doc/mgetty/voice + +# chown $(FAX_USER).$(FAX_GROUP) $(DEBIAN_DIR)/mgetty-fax/usr/lib/mgetty-fax/faxq-helper +# chmod 4755 $(DEBIAN_DIR)/mgetty-fax/usr/lib/mgetty-fax/faxq-helper + +# chown $(FAX_USER).root $(DEBIAN_DIR)/mgetty-fax/var/spool/fax/outgoing +# chmod 700 $(DEBIAN_DIR)/mgetty-fax/var/spool/fax/outgoing + +# chown $(FAX_USER).root $(DEBIAN_DIR)/mgetty-fax/var/lock/fax +# chmod 755 $(DEBIAN_DIR)/mgetty-fax/var/lock/fax + + dh_installexamples -a + dh_installmenu -a + dh_installinit -a + dh_installmime -a + dh_installdebconf -a +# dh_installmanpages -a + dh_installchangelogs -pmgetty ChangeLog + dh_installchangelogs -pmgetty-viewfax $(VFDIR)/ChangeLog $(VFDIR)/README + dh_installchangelogs -pmgetty-pvftools voice/ChangeLog + dh_strip -a + dh_compress -a -Xviewfax.tif + dh_fixperms -a + + dh_installdeb -a + dh_shlibdeps -a + dh_gencontrol -a +# dh_makeshlibs -a + dh_md5sums -a + dh_builddeb -a + +binary: binary-indep binary-arch +.PHONY: binary binary-arch binary-indep clean --- mgetty-1.1.36.orig/debian/vm.pod +++ mgetty-1.1.36/debian/vm.pod @@ -0,0 +1,80 @@ +=pod + +=head1 NAME + +B - VoiceModem is the program for handling the voice modem functionality from shell scripts + +=head1 ACTIONS + +=over 4 + +=item beep I B<[ []]> + +=item diagnostics I B + +=item dial I B + +=item help + +=item play I B<[]+> + +=item record I B + +=item shell I B<[ [shell options]]> + +=item wait I B<[