opendbx-1.4.6/0000755000175000017500000000000011765214161010166 500000000000000opendbx-1.4.6/INSTALL0000644000175000017500000002243211425153451011137 00000000000000Installation Instructions ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves the results of its tests to speed up reconfiguring. (Caching is disabled by default to prevent problems with accidental use of stale cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If you are using the cache, and at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create `configure' by a program called `autoconf'. You only need `configure.ac' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not support the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option `--exec-prefix=PREFIX' to `configure', the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the _same_ architectures, `configure' can figure that out, but if it prints a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: CPU-COMPANY-SYSTEM where SYSTEM can have one of these forms: OS KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a platform different from the build platform, you should specify the "host" platform (i.e., that on which the generated programs will eventually be run) with `--host=TYPE'. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Defining Variables ================== Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Here is a another example: /bin/bash ./configure CONFIG_SHELL=/bin/bash Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent configuration-related scripts to be executed by `/bin/bash'. `configure' Invocation ====================== `configure' recognizes the following options to control how it operates. `--help' `-h' Print a summary of the options to `configure', and exit. `--version' `-V' Print the version of Autoconf used to generate the `configure' script, and exit. `--cache-file=FILE' Enable the cache: use and save the results of the tests in FILE, traditionally `config.cache'. FILE defaults to `/dev/null' to disable caching. `--config-cache' `-C' Alias for `--cache-file=config.cache'. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. To suppress all normal output, redirect it to `/dev/null' (any error messages will still be shown). `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. opendbx-1.4.6/m4/0000755000175000017500000000000011765214161010506 500000000000000opendbx-1.4.6/m4/lib-prefix.m40000644000175000017500000001503611425153451012733 00000000000000# lib-prefix.m4 serial 5 (gettext-0.15) dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't dnl require excessive bracketing. ifdef([AC_HELP_STRING], [AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], [AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed dnl to access previously installed libraries. The basic assumption is that dnl a user will want packages to use other packages he previously installed dnl with the same --prefix option. dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate dnl libraries, but is otherwise very convenient. AC_DEFUN([AC_LIB_PREFIX], [ AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) AC_REQUIRE([AC_PROG_CC]) AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib-prefix], [ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib --without-lib-prefix don't search for libraries in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi ]) if test $use_additional = yes; then dnl Potentially add $additional_includedir to $CPPFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's already present in $CPPFLAGS, dnl 3. if it's /usr/local/include and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= for x in $CPPFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $CPPFLAGS. CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" fi fi fi fi dnl Potentially add $additional_libdir to $LDFLAGS. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's already present in $LDFLAGS, dnl 3. if it's /usr/local/lib and we are using GCC on Linux, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= for x in $LDFLAGS; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux*) haveit=yes;; esac fi fi if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LDFLAGS. LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" fi fi fi fi fi ]) dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, dnl acl_final_exec_prefix, containing the values to which $prefix and dnl $exec_prefix will expand at the end of the configure script. AC_DEFUN([AC_LIB_PREPARE_PREFIX], [ dnl Unfortunately, prefix and exec_prefix get only finally determined dnl at the end of configure. if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" ]) dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the dnl variables prefix and exec_prefix bound to the values they will have dnl at the end of the configure script. AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], [ acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" $1 exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" ]) dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing dnl the basename of the libdir, either "lib" or "lib64". AC_DEFUN([AC_LIB_PREPARE_MULTILIB], [ dnl There is no formal standard regarding lib and lib64. The current dnl practice is that on a system supporting 32-bit and 64-bit instruction dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit dnl libraries go under $prefix/lib. We determine the compiler's default dnl mode by looking at the compiler's library search path. If at least dnl of its elements ends in /lib64 or points to a directory whose absolute dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the dnl default, namely "lib". acl_libdirstem=lib searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` if test -n "$searchpath"; then acl_save_IFS="${IFS= }"; IFS=":" for searchdir in $searchpath; do if test -d "$searchdir"; then case "$searchdir" in */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; *) searchdir=`cd "$searchdir" && pwd` case "$searchdir" in */lib64 ) acl_libdirstem=lib64 ;; esac ;; esac fi done IFS="$acl_save_IFS" fi ]) opendbx-1.4.6/m4/progtest.m40000644000175000017500000000555011425153451012541 00000000000000# progtest.m4 serial 4 (gettext-0.14.2) dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1996. AC_PREREQ(2.50) # Search path for a program which passes the given test. dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN([AM_PATH_PROG_WITH_TEST], [ # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in [[\\/]]* | ?:[[\\/]]*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in ifelse([$5], , $PATH, [$5]); do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) opendbx-1.4.6/m4/nls.m40000644000175000017500000000226611425153451011467 00000000000000# nls.m4 serial 3 (gettext-0.15) dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ(2.50) AC_DEFUN([AM_NLS], [ AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE(nls, [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT($USE_NLS) AC_SUBST(USE_NLS) ]) opendbx-1.4.6/m4/po.m40000644000175000017500000004460611425153451011315 00000000000000# po.m4 serial 15 (gettext-0.17) dnl Copyright (C) 1995-2007 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2003. AC_PREREQ(2.50) dnl Checks for all prerequisites of the po subdirectory. AC_DEFUN([AM_PO_SUBDIRS], [ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake AC_REQUIRE([AM_NLS])dnl dnl Release version of the gettext macros. This is used to ensure that dnl the gettext macros and po/Makefile.in.in are in sync. AC_SUBST([GETTEXT_MACRO_VERSION], [0.17]) dnl Perform the following tests also if --disable-nls has been given, dnl because they are needed for "make dist" to work. dnl Search for GNU msgfmt in the PATH. dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. dnl The second test excludes FreeBSD msgfmt. AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], :) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) dnl Test whether it is GNU msgfmt >= 0.15. changequote(,)dnl case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; *) MSGFMT_015=$MSGFMT ;; esac changequote([,])dnl AC_SUBST([MSGFMT_015]) changequote(,)dnl case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; *) GMSGFMT_015=$GMSGFMT ;; esac changequote([,])dnl AC_SUBST([GMSGFMT_015]) dnl Search for GNU xgettext 0.12 or newer in the PATH. dnl The first test excludes Solaris xgettext and early GNU xgettext versions. dnl The second test excludes FreeBSD xgettext. AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], :) dnl Remove leftover from FreeBSD xgettext call. rm -f messages.po dnl Test whether it is GNU xgettext >= 0.15. changequote(,)dnl case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; *) XGETTEXT_015=$XGETTEXT ;; esac changequote([,])dnl AC_SUBST([XGETTEXT_015]) dnl Search for GNU msgmerge 0.11 or newer in the PATH. AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) dnl Installation directories. dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we dnl have to define it here, so that it can be used in po/Makefile. test -n "$localedir" || localedir='${datadir}/locale' AC_SUBST([localedir]) dnl Support for AM_XGETTEXT_OPTION. test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) AC_CONFIG_COMMANDS([po-directories], [[ for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Treat a directory as a PO directory if and only if it has a # POTFILES.in file. This allows packages to have multiple PO # directories under different names or in different locations. if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assigment from automake < 1.5. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. # Hide the ALL_LINGUAS assigment from automake < 1.5. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi # Compute POFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) # Compute UPDATEPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) # Compute DUMMYPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) # Compute GMOFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= UPDATEPOFILES= DUMMYPOFILES= GMOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done]], [# Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it # from automake < 1.5. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" ]) ]) dnl Postprocesses a Makefile in a directory containing PO files. AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], [ # When this code is run, in config.status, two variables have already been # set: # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, # - LINGUAS is the value of the environment variable LINGUAS at configure # time. changequote(,)dnl # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Find a way to echo strings without interpreting backslash. if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then gt_echo='echo' else if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then gt_echo='printf %s\n' else echo_func () { cat < "$ac_file.tmp" if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then # Add dependencies that cannot be formulated as a simple suffix rule. for lang in $ALL_LINGUAS; do frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` cat >> "$ac_file.tmp" < /dev/null; then # Add dependencies that cannot be formulated as a simple suffix rule. for lang in $ALL_LINGUAS; do frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` cat >> "$ac_file.tmp" <> "$ac_file.tmp" < #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_func_iconv=yes) if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" AC_TRY_LINK([#include #include ], [iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd);], am_cv_lib_iconv=yes am_cv_func_iconv=yes) LIBS="$am_save_LIBS" fi ]) if test "$am_cv_func_iconv" = yes; then AC_CACHE_CHECK([for working iconv], am_cv_func_iconv_works, [ dnl This tests against bugs in AIX 5.1 and HP-UX 11.11. am_save_LIBS="$LIBS" if test $am_cv_lib_iconv = yes; then LIBS="$LIBS $LIBICONV" fi AC_TRY_RUN([ #include #include int main () { /* Test against AIX 5.1 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); if (cd_utf8_to_88591 != (iconv_t)(-1)) { static const char input[] = "\342\202\254"; /* EURO SIGN */ char buf[10]; const char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_utf8_to_88591, (char **) &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) return 1; } } #if 0 /* This bug could be worked around by the caller. */ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ { iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; char buf[50]; const char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_88591_to_utf8, (char **) &inptr, &inbytesleft, &outptr, &outbytesleft); if ((int)res > 0) return 1; } } #endif /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is provided. */ if (/* Try standardized names. */ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) /* Try IRIX, OSF/1 names. */ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) /* Try AIX names. */ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) /* Try HP-UX names. */ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) return 1; return 0; }], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no], [case "$host_os" in aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; *) am_cv_func_iconv_works="guessing yes" ;; esac]) LIBS="$am_save_LIBS" ]) case "$am_cv_func_iconv_works" in *no) am_func_iconv=no am_cv_lib_iconv=no ;; *) am_func_iconv=yes ;; esac else am_func_iconv=no am_cv_lib_iconv=no fi if test "$am_func_iconv" = yes; then AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function and it works.]) fi if test "$am_cv_lib_iconv" = yes; then AC_MSG_CHECKING([how to link with libiconv]) AC_MSG_RESULT([$LIBICONV]) else dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV dnl either. CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi AC_SUBST(LIBICONV) AC_SUBST(LTLIBICONV) ]) AC_DEFUN([AM_ICONV], [ AM_ICONV_LINK if test "$am_cv_func_iconv" = yes; then AC_MSG_CHECKING([for iconv declaration]) AC_CACHE_VAL(am_cv_proto_iconv, [ AC_TRY_COMPILE([ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif ], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` AC_MSG_RESULT([$]{ac_t:- }[$]am_cv_proto_iconv) AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, [Define as const if the declaration of iconv() needs const.]) fi ]) opendbx-1.4.6/m4/ltversion.m40000644000175000017500000000127711765211273012725 00000000000000# ltversion.m4 -- version numbers -*- Autoconf -*- # # Copyright (C) 2004 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # Generated from ltversion.in. # serial 3017 ltversion.m4 # This file is part of GNU Libtool m4_define([LT_PACKAGE_VERSION], [2.2.6b]) m4_define([LT_PACKAGE_REVISION], [1.3017]) AC_DEFUN([LTVERSION_VERSION], [macro_version='2.2.6b' macro_revision='1.3017' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) opendbx-1.4.6/m4/ltoptions.m40000644000175000017500000002724211765211273012733 00000000000000# Helper functions for option handling. -*- Autoconf -*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) # ------------------------------------------ m4_define([_LT_MANGLE_OPTION], [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) # --------------------------------------- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a # matching handler defined, dispatch to it. Other OPTION-NAMEs are # saved as a flag. m4_define([_LT_SET_OPTION], [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), _LT_MANGLE_DEFUN([$1], [$2]), [m4_warning([Unknown $1 option `$2'])])[]dnl ]) # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) # ------------------------------------------------------------ # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. m4_define([_LT_IF_OPTION], [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) # ------------------------------------------------------- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME # are set. m4_define([_LT_UNLESS_OPTIONS], [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), [m4_define([$0_found])])])[]dnl m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ])[]dnl ]) # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) # ---------------------------------------- # OPTION-LIST is a space-separated list of Libtool options associated # with MACRO-NAME. If any OPTION has a matching handler declared with # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about # the unknown option and exit. m4_defun([_LT_SET_OPTIONS], [# Set options m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), [_LT_SET_OPTION([$1], _LT_Option)]) m4_if([$1],[LT_INIT],[ dnl dnl Simply set some default values (i.e off) if boolean options were not dnl specified: _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ]) _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ]) dnl dnl If no reference was made to various pairs of opposing options, then dnl we run the default mode handler for the pair. For example, if neither dnl `shared' nor `disable-shared' was passed, we enable building of shared dnl archives by default: _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], [_LT_ENABLE_FAST_INSTALL]) ]) ])# _LT_SET_OPTIONS ## --------------------------------- ## ## Macros to handle LT_INIT options. ## ## --------------------------------- ## # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) # ----------------------------------------- m4_define([_LT_MANGLE_DEFUN], [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) # ----------------------------------------------- m4_define([LT_OPTION_DEFINE], [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ])# LT_OPTION_DEFINE # dlopen # ------ LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ]) AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `dlopen' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) # win32-dll # --------- # Declare package support for building win32 dll's. LT_OPTION_DEFINE([LT_INIT], [win32-dll], [enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; esac test -z "$AS" && AS=as _LT_DECL([], [AS], [0], [Assembler program])dnl test -z "$DLLTOOL" && DLLTOOL=dlltool _LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ])# win32-dll AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl _LT_SET_OPTION([LT_INIT], [win32-dll]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `win32-dll' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) # _LT_ENABLE_SHARED([DEFAULT]) # ---------------------------- # implement the --enable-shared flag, and supports the `shared' and # `disable-shared' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_SHARED], [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([shared], [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) _LT_DECL([build_libtool_libs], [enable_shared], [0], [Whether or not to build shared libraries]) ])# _LT_ENABLE_SHARED LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) # Old names: AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ]) AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) ]) AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_SHARED], []) dnl AC_DEFUN([AM_DISABLE_SHARED], []) # _LT_ENABLE_STATIC([DEFAULT]) # ---------------------------- # implement the --enable-static flag, and support the `static' and # `disable-static' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_STATIC], [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([static], [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]_LT_ENABLE_STATIC_DEFAULT) _LT_DECL([build_old_libs], [enable_static], [0], [Whether or not to build static libraries]) ])# _LT_ENABLE_STATIC LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) # Old names: AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ]) AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) ]) AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_ENABLE_STATIC], []) dnl AC_DEFUN([AM_DISABLE_STATIC], []) # _LT_ENABLE_FAST_INSTALL([DEFAULT]) # ---------------------------------- # implement the --enable-fast-install flag, and support the `fast-install' # and `disable-fast-install' LT_INIT options. # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. m4_define([_LT_ENABLE_FAST_INSTALL], [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl AC_ARG_ENABLE([fast-install], [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) _LT_DECL([fast_install], [enable_fast_install], [0], [Whether or not to optimize for fast installation])dnl ])# _LT_ENABLE_FAST_INSTALL LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) # Old names: AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `fast-install' option into LT_INIT's first parameter.]) ]) AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `disable-fast-install' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) # _LT_WITH_PIC([MODE]) # -------------------- # implement the --with-pic flag, and support the `pic-only' and `no-pic' # LT_INIT options. # MODE is either `yes' or `no'. If omitted, it defaults to `both'. m4_define([_LT_WITH_PIC], [AC_ARG_WITH([pic], [AS_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) # Old name: AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) AC_DIAGNOSE([obsolete], [$0: Remove this warning and the call to _LT_SET_OPTION when you put the `pic-only' option into LT_INIT's first parameter.]) ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) ## ----------------- ## ## LTDL_INIT Options ## ## ----------------- ## m4_define([_LTDL_MODE], []) LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], [m4_define([_LTDL_MODE], [nonrecursive])]) LT_OPTION_DEFINE([LTDL_INIT], [recursive], [m4_define([_LTDL_MODE], [recursive])]) LT_OPTION_DEFINE([LTDL_INIT], [subproject], [m4_define([_LTDL_MODE], [subproject])]) m4_define([_LTDL_TYPE], []) LT_OPTION_DEFINE([LTDL_INIT], [installable], [m4_define([_LTDL_TYPE], [installable])]) LT_OPTION_DEFINE([LTDL_INIT], [convenience], [m4_define([_LTDL_TYPE], [convenience])]) opendbx-1.4.6/m4/lib-ld.m40000644000175000017500000000653111425153451012035 00000000000000# lib-ld.m4 serial 3 (gettext-0.13) dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl Subroutines of libtool.m4, dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision dnl with libtool.m4. dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. AC_DEFUN([AC_LIB_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] [re_direlt='/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(acl_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in *GNU* | *'with BFD'*) test "$with_gnu_ld" != no && break ;; *) test "$with_gnu_ld" != yes && break ;; esac fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$acl_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_LIB_PROG_LD_GNU ]) opendbx-1.4.6/m4/libtool.m40000644000175000017500000077464711765211273012366 00000000000000# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ]) # serial 56 LT_INIT # LT_PREREQ(VERSION) # ------------------ # Complain and exit if this libtool version is less that VERSION. m4_defun([LT_PREREQ], [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, [m4_default([$3], [m4_fatal([Libtool version $1 or higher is required], 63)])], [$2])]) # _LT_CHECK_BUILDDIR # ------------------ # Complain if the absolute build directory name contains unusual characters m4_defun([_LT_CHECK_BUILDDIR], [case `pwd` in *\ * | *\ *) AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; esac ]) # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl AC_BEFORE([$0], [LTDL_INIT])dnl m4_require([_LT_CHECK_BUILDDIR])dnl dnl Autoconf doesn't catch unexpanded LT_ macros by default: m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 dnl unless we require an AC_DEFUNed macro: AC_REQUIRE([LTOPTIONS_VERSION])dnl AC_REQUIRE([LTSUGAR_VERSION])dnl AC_REQUIRE([LTVERSION_VERSION])dnl AC_REQUIRE([LTOBSOLETE_VERSION])dnl m4_require([_LT_PROG_LTMAIN])dnl dnl Parse OPTIONS _LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl _LT_SETUP # Only expand once: m4_define([LT_INIT]) ])# LT_INIT # Old names: AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PROG_LIBTOOL], []) dnl AC_DEFUN([AM_PROG_LIBTOOL], []) # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. m4_defun([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) # _LT_FILEUTILS_DEFAULTS # ---------------------- # It is okay to use these file commands and assume they have been set # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. m4_defun([_LT_FILEUTILS_DEFAULTS], [: ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} ])# _LT_FILEUTILS_DEFAULTS # _LT_SETUP # --------- m4_defun([_LT_SETUP], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl _LT_DECL([], [host_alias], [0], [The host system])dnl _LT_DECL([], [host], [0])dnl _LT_DECL([], [host_os], [0])dnl dnl _LT_DECL([], [build_alias], [0], [The build system])dnl _LT_DECL([], [build], [0])dnl _LT_DECL([], [build_os], [0])dnl dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl dnl AC_REQUIRE([AC_PROG_LN_S])dnl test -z "$LN_S" && LN_S="ln -s" _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl AC_REQUIRE([LT_CMD_MAX_LEN])dnl _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_CMD_RELOAD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl _LT_CONFIG_LIBTOOL_INIT([ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi ]) if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi _LT_CHECK_OBJDIR m4_require([_LT_TAG_COMPILER])dnl _LT_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([["`\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then _LT_PATH_MAGIC fi ;; esac # Use C for the default configuration in the libtool script LT_SUPPORTED_TAG([CC]) _LT_LANG_C_CONFIG _LT_LANG_DEFAULT_CONFIG _LT_CONFIG_COMMANDS ])# _LT_SETUP # _LT_PROG_LTMAIN # --------------- # Note that this code is called both from `configure', and `config.status' # now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, # `config.status' has no value for ac_aux_dir unless we are using Automake, # so we pass a copy along to make sure it has a sensible value anyway. m4_defun([_LT_PROG_LTMAIN], [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ltmain="$ac_aux_dir/ltmain.sh" ])# _LT_PROG_LTMAIN ## ------------------------------------- ## ## Accumulate code for creating libtool. ## ## ------------------------------------- ## # So that we can recreate a full libtool script including additional # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS # in macros and then make a single call at the end using the `libtool' # label. # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) # ---------------------------------------- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL_INIT], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_INIT], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_INIT]) # _LT_CONFIG_LIBTOOL([COMMANDS]) # ------------------------------ # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. m4_define([_LT_CONFIG_LIBTOOL], [m4_ifval([$1], [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], [$1 ])])]) # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) # ----------------------------------------------------- m4_defun([_LT_CONFIG_SAVE_COMMANDS], [_LT_CONFIG_LIBTOOL([$1]) _LT_CONFIG_LIBTOOL_INIT([$2]) ]) # _LT_FORMAT_COMMENT([COMMENT]) # ----------------------------- # Add leading comment marks to the start of each line, and a trailing # full-stop to the whole comment if one is not present already. m4_define([_LT_FORMAT_COMMENT], [m4_ifval([$1], [ m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) )]) ## ------------------------ ## ## FIXME: Eliminate VARNAME ## ## ------------------------ ## # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) # ------------------------------------------------------------------- # CONFIGNAME is the name given to the value in the libtool script. # VARNAME is the (base) name used in the configure script. # VALUE may be 0, 1 or 2 for a computed quote escaped value based on # VARNAME. Any other value will be used directly. m4_define([_LT_DECL], [lt_if_append_uniq([lt_decl_varnames], [$2], [, ], [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], [m4_ifval([$1], [$1], [$2])]) lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) m4_ifval([$4], [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) lt_dict_add_subkey([lt_decl_dict], [$2], [tagged?], [m4_ifval([$5], [yes], [no])])]) ]) # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) # -------------------------------------------------------- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_tag_varnames], [_lt_decl_filter([tagged?], [yes], $@)]) # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) # --------------------------------------------------------- m4_define([_lt_decl_filter], [m4_case([$#], [0], [m4_fatal([$0: too few arguments: $#])], [1], [m4_fatal([$0: too few arguments: $#: $1])], [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], [lt_dict_filter([lt_decl_dict], $@)])[]dnl ]) # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) # -------------------------------------------------- m4_define([lt_decl_quote_varnames], [_lt_decl_filter([value], [1], $@)]) # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_dquote_varnames], [_lt_decl_filter([value], [2], $@)]) # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) # --------------------------------------------------- m4_define([lt_decl_varnames_tagged], [m4_assert([$# <= 2])dnl _$0(m4_quote(m4_default([$1], [[, ]])), m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) m4_define([_lt_decl_varnames_tagged], [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) # lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) # ------------------------------------------------ m4_define([lt_decl_all_varnames], [_$0(m4_quote(m4_default([$1], [[, ]])), m4_if([$2], [], m4_quote(lt_decl_varnames), m4_quote(m4_shift($@))))[]dnl ]) m4_define([_lt_decl_all_varnames], [lt_join($@, lt_decl_varnames_tagged([$1], lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl ]) # _LT_CONFIG_STATUS_DECLARE([VARNAME]) # ------------------------------------ # Quote a variable value, and forward it to `config.status' so that its # declaration there will have the same value as in `configure'. VARNAME # must have a single quote delimited value for this to work. m4_define([_LT_CONFIG_STATUS_DECLARE], [$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) # _LT_CONFIG_STATUS_DECLARATIONS # ------------------------------ # We delimit libtool config variables with single quotes, so when # we write them to config.status, we have to be sure to quote all # embedded single quotes properly. In configure, this macro expands # each variable declared with _LT_DECL (and _LT_TAGDECL) into: # # ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAGS # ---------------- # Output comment and list of tags supported by the script m4_defun([_LT_LIBTOOL_TAGS], [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl available_tags="_LT_TAGS"dnl ]) # _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) # ----------------------------------- # Extract the dictionary values for VARNAME (optionally with TAG) and # expand to a commented shell variable setting: # # # Some comment about what VAR is for. # visible_name=$lt_internal_name m4_define([_LT_LIBTOOL_DECLARE], [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [description])))[]dnl m4_pushdef([_libtool_name], m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), [0], [_libtool_name=[$]$1], [1], [_libtool_name=$lt_[]$1], [2], [_libtool_name=$lt_[]$1], [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl ]) # _LT_LIBTOOL_CONFIG_VARS # ----------------------- # Produce commented declarations of non-tagged libtool config variables # suitable for insertion in the LIBTOOL CONFIG section of the `libtool' # script. Tagged libtool config variables (even for the LIBTOOL CONFIG # section) are produced by _LT_LIBTOOL_TAG_VARS. m4_defun([_LT_LIBTOOL_CONFIG_VARS], [m4_foreach([_lt_var], m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) # _LT_LIBTOOL_TAG_VARS(TAG) # ------------------------- m4_define([_LT_LIBTOOL_TAG_VARS], [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) # _LT_TAGVAR(VARNAME, [TAGNAME]) # ------------------------------ m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) # _LT_CONFIG_COMMANDS # ------------------- # Send accumulated output to $CONFIG_STATUS. Thanks to the lists of # variables for single and double quote escaping we saved from calls # to _LT_DECL, we can put quote escaped variables declarations # into `config.status', and then the shell code to quote escape them in # for loops in `config.status'. Finally, any additional code accumulated # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. m4_defun([_LT_CONFIG_COMMANDS], [AC_PROVIDE_IFELSE([LT_OUTPUT], dnl If the libtool generation code has been placed in $CONFIG_LT, dnl instead of duplicating it all over again into config.status, dnl then we will have config.status run $CONFIG_LT later, so it dnl needs to know what name is stored there: [AC_CONFIG_COMMANDS([libtool], [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], dnl If the libtool generation code is destined for config.status, dnl expand the accumulated commands and init code now: [AC_CONFIG_COMMANDS([libtool], [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ])#_LT_CONFIG_COMMANDS # Initialize. m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], [ # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' _LT_CONFIG_STATUS_DECLARATIONS LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # Quote evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_quote_varnames); do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in lt_decl_all_varnames([[ \ ]], lt_decl_dquote_varnames); do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[[\\\\\\\`\\"\\\$]]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Fix-up fallback echo if it was mangled by the above quoting rules. case \$lt_ECHO in *'\\\[$]0 --fallback-echo"')dnl " lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ;; esac _LT_OUTPUT_LIBTOOL_INIT ]) # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before # AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} AC_MSG_NOTICE([creating $CONFIG_LT]) cat >"$CONFIG_LT" <<_LTEOF #! $SHELL # Generated by $as_me. # Run this file to recreate a libtool stub with the current configuration. lt_cl_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AS_SHELL_SANITIZE _AS_PREPARE exec AS_MESSAGE_FD>&1 exec AS_MESSAGE_LOG_FD>>config.log { echo AS_BOX([Running $as_me.]) } >&AS_MESSAGE_LOG_FD lt_cl_help="\ \`$as_me' creates a local libtool stub from the current configuration, for use in further configure time tests before the real libtool is generated. Usage: $[0] [[OPTIONS]] -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files Report bugs to ." lt_cl_version="\ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. Copyright (C) 2008 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation gives unlimited permision to copy, distribute and modify it." while test $[#] != 0 do case $[1] in --version | --v* | -V ) echo "$lt_cl_version"; exit 0 ;; --help | --h* | -h ) echo "$lt_cl_help"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --quiet | --q* | --silent | --s* | -q ) lt_cl_silent=: ;; -*) AC_MSG_ERROR([unrecognized option: $[1] Try \`$[0] --help' for more information.]) ;; *) AC_MSG_ERROR([unrecognized argument: $[1] Try \`$[0] --help' for more information.]) ;; esac shift done if $lt_cl_silent; then exec AS_MESSAGE_FD>/dev/null fi _LTEOF cat >>"$CONFIG_LT" <<_LTEOF _LT_OUTPUT_LIBTOOL_COMMANDS_INIT _LTEOF cat >>"$CONFIG_LT" <<\_LTEOF AC_MSG_NOTICE([creating $ofile]) _LT_OUTPUT_LIBTOOL_COMMANDS AS_EXIT(0) _LTEOF chmod +x "$CONFIG_LT" # configure is writing to config.log, but config.lt does its own redirection, # appending to config.log, which fails on DOS, as config.log is still kept # open by configure. Here we exec the FD to /dev/null, effectively closing # config.log, so it can be properly (re)opened and appended to by config.lt. if test "$no_create" != yes; then lt_cl_success=: test "$silent" = yes && lt_config_lt_args="$lt_config_lt_args --quiet" exec AS_MESSAGE_LOG_FD>/dev/null $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false exec AS_MESSAGE_LOG_FD>>config.log $lt_cl_success || AS_EXIT(1) fi ])# LT_OUTPUT # _LT_CONFIG(TAG) # --------------- # If TAG is the built-in tag, create an initial libtool script with a # default configuration from the untagged config vars. Otherwise add code # to config.status for appending the configuration named by TAG from the # matching tagged config vars. m4_defun([_LT_CONFIG], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_CONFIG_SAVE_COMMANDS([ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl m4_if(_LT_TAG, [C], [ # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # _LT_COPYING _LT_LIBTOOL_TAGS # ### BEGIN LIBTOOL CONFIG _LT_LIBTOOL_CONFIG_VARS _LT_LIBTOOL_TAG_VARS # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac _LT_PROG_LTMAIN # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) _LT_PROG_XSI_SHELLFNS sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ], [cat <<_LT_EOF >> "$ofile" dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded dnl in a comment (ie after a #). # ### BEGIN LIBTOOL TAG CONFIG: $1 _LT_LIBTOOL_TAG_VARS(_LT_TAG) # ### END LIBTOOL TAG CONFIG: $1 _LT_EOF ])dnl /m4_if ], [m4_if([$1], [], [ PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile'], []) ])dnl /_LT_CONFIG_SAVE_COMMANDS ])# _LT_CONFIG # LT_SUPPORTED_TAG(TAG) # --------------------- # Trace this macro to discover what tags are supported by the libtool # --tag option, using: # autoconf --trace 'LT_SUPPORTED_TAG:$1' AC_DEFUN([LT_SUPPORTED_TAG], []) # C support is built-in for now m4_define([_LT_LANG_C_enabled], []) m4_define([_LT_TAGS], []) # LT_LANG(LANG) # ------------- # Enable libtool support for the given language if not already enabled. AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl m4_case([$1], [C], [_LT_LANG(C)], [C++], [_LT_LANG(CXX)], [Java], [_LT_LANG(GCJ)], [Fortran 77], [_LT_LANG(F77)], [Fortran], [_LT_LANG(FC)], [Windows Resource], [_LT_LANG(RC)], [m4_ifdef([_LT_LANG_]$1[_CONFIG], [_LT_LANG($1)], [m4_fatal([$0: unsupported language: "$1"])])])dnl ])# LT_LANG # _LT_LANG(LANGNAME) # ------------------ m4_defun([_LT_LANG], [m4_ifdef([_LT_LANG_]$1[_enabled], [], [LT_SUPPORTED_TAG([$1])dnl m4_append([_LT_TAGS], [$1 ])dnl m4_define([_LT_LANG_]$1[_enabled], [])dnl _LT_LANG_$1_CONFIG($1)])dnl ])# _LT_LANG # _LT_LANG_DEFAULT_CONFIG # ----------------------- m4_defun([_LT_LANG_DEFAULT_CONFIG], [AC_PROVIDE_IFELSE([AC_PROG_CXX], [LT_LANG(CXX)], [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) AC_PROVIDE_IFELSE([AC_PROG_F77], [LT_LANG(F77)], [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) AC_PROVIDE_IFELSE([AC_PROG_FC], [LT_LANG(FC)], [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal dnl pulling things in needlessly. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [LT_LANG(GCJ)], [AC_PROVIDE_IFELSE([LT_PROG_GCJ], [LT_LANG(GCJ)], [m4_ifdef([AC_PROG_GCJ], [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([A][M_PROG_GCJ], [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) m4_ifdef([LT_PROG_GCJ], [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) AC_PROVIDE_IFELSE([LT_PROG_RC], [LT_LANG(RC)], [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ])# _LT_LANG_DEFAULT_CONFIG # Obsolete macros: AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_CXX], []) dnl AC_DEFUN([AC_LIBTOOL_F77], []) dnl AC_DEFUN([AC_LIBTOOL_FC], []) dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) # _LT_TAG_COMPILER # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. m4_defun([_LT_COMPILER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. m4_defun([_LT_LINKER_BOILERPLATE], [m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) AC_CHECK_TOOL([LIPO], [lipo], [:]) AC_CHECK_TOOL([OTOOL], [otool], [:]) AC_CHECK_TOOL([OTOOL64], [otool64], [:]) _LT_DECL([], [DSYMUTIL], [1], [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) _LT_DECL([], [NMEDIT], [1], [Tool to change global to local symbols on Mac OS X]) _LT_DECL([], [LIPO], [1], [Tool to manipulate fat objects and archives on Mac OS X]) _LT_DECL([], [OTOOL], [1], [ldd/readelf like tool for Mach-O binaries on Mac OS X]) _LT_DECL([], [OTOOL64], [1], [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&AS_MESSAGE_LOG_FD fi rm -rf libconftest.dylib* rm -f conftest.* fi]) AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [lt_cv_ld_exported_symbols_list=yes], [lt_cv_ld_exported_symbols_list=no]) LDFLAGS="$save_LDFLAGS" ]) case $host_os in rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[[012]]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ]) # _LT_DARWIN_LINKER_FEATURES # -------------------------- # Checks for linker and compiler features on darwin m4_defun([_LT_DARWIN_LINKER_FEATURES], [ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(whole_archive_flag_spec, $1)='' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=echo _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" m4_if([$1], [CXX], [ if test "$lt_cv_apple_cc_single_mod" != "yes"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi ],[]) else _LT_TAGVAR(ld_shlibs, $1)=no fi ]) # _LT_SYS_MODULE_PATH_AIX # ----------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. m4_defun([_LT_SYS_MODULE_PATH_AIX], [m4_require([_LT_DECL_SED])dnl AC_LINK_IFELSE(AC_LANG_PROGRAM,[ lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_SYS_MODULE_PATH_AIX # _LT_SHELL_INIT(ARG) # ------------------- m4_define([_LT_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) $1 AC_DIVERT_POP ])# _LT_SHELL_INIT # _LT_PROG_ECHO_BACKSLASH # ----------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. m4_defun([_LT_PROG_ECHO_BACKSLASH], [_LT_SHELL_INIT([ # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$lt_ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac ECHO=${lt_ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then # Yippee, $ECHO works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat <<_LT_EOF [$]* _LT_EOF exit 0 fi # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$lt_ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if { echo_test_string=`eval $cmd`; } 2>/dev/null && { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null then break fi done fi if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$ECHO" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. ECHO='print -r' elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. ECHO='printf %s\n' if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL ECHO="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. ECHO=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. lt_ECHO=$ECHO if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(lt_ECHO) ]) _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) _LT_DECL([], [ECHO], [1], [An echo program that does not interpret backslashes]) ])# _LT_PROG_ECHO_BACKSLASH # _LT_ENABLE_LOCK # --------------- m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], [AS_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" ])# _LT_ENABLE_LOCK # _LT_CMD_OLD_ARCHIVE # ------------------- m4_defun([_LT_CMD_OLD_ARCHIVE], [AC_CHECK_TOOL(AR, ar, false) test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru _LT_DECL([], [AR], [1], [The archiver]) _LT_DECL([], [AR_FLAGS], [1]) AC_CHECK_TOOL(STRIP, strip, :) test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi _LT_DECL([], [old_postinstall_cmds], [2]) _LT_DECL([], [old_postuninstall_cmds], [2]) _LT_TAGDECL([], [old_archive_cmds], [2], [Commands used to build an old-style archive]) ])# _LT_CMD_OLD_ARCHIVE # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $RM conftest* ]) if test x"[$]$2" = xyes; then m4_if([$5], , :, [$5]) else m4_if([$6], , :, [$6]) fi ])# _LT_COMPILER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------- # Check whether the given linker option works AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then m4_if([$4], , :, [$4]) else m4_if([$5], , :, [$5]) fi ])# _LT_LINKER_OPTION # Old name: AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) # LT_CMD_MAX_LEN #--------------- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl # find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi max_cmd_len=$lt_cv_sys_max_cmd_len _LT_DECL([], [max_cmd_len], [0], [What is the maximum length of a command?]) ])# LT_CMD_MAX_LEN # Old name: AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) # _LT_HEADER_DLFCN # ---------------- m4_defun([_LT_HEADER_DLFCN], [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ])# _LT_HEADER_DLFCN # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ---------------------------------------------------------------- m4_defun([_LT_TRY_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF [#line __oline__ "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); return status; }] _LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_TRY_DLOPEN_SELF # LT_SYS_DLOPEN_SELF # ------------------ AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi _LT_DECL([dlopen_support], [enable_dlopen], [0], [Whether dlopen is supported]) _LT_DECL([dlopen_self], [enable_dlopen_self], [0], [Whether dlopen of programs is supported]) _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], [Whether dlopen of statically linked programs is supported]) ])# LT_SYS_DLOPEN_SELF # Old name: AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) # _LT_COMPILER_C_O([TAGNAME]) # --------------------------- # Check to see if options -c and -o are simultaneously supported by compiler. # This macro does not hard code the compiler like AC_PROG_CC_C_O. m4_defun([_LT_COMPILER_C_O], [m4_require([_LT_DECL_SED])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* ]) _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], [Does compiler simultaneously support -c and -o options?]) ])# _LT_COMPILER_C_O # _LT_COMPILER_FILE_LOCKS([TAGNAME]) # ---------------------------------- # Check to see if we can do hard links to lock some files if needed m4_defun([_LT_COMPILER_FILE_LOCKS], [m4_require([_LT_ENABLE_LOCK])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl _LT_COMPILER_C_O([$1]) hard_links="nottested" if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ])# _LT_COMPILER_FILE_LOCKS # _LT_CHECK_OBJDIR # ---------------- m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir _LT_DECL([], [objdir], [0], [The name of the directory that contains temporary libtool files])dnl m4_pattern_allow([LT_OBJDIR])dnl AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", [Define to the sub-directory in which libtool stores uninstalled libraries.]) ])# _LT_CHECK_OBJDIR # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) # -------------------------------------- # Check hardcoding attributes. m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_TAGVAR(hardcode_action, $1)= if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || test -n "$_LT_TAGVAR(runpath_var, $1)" || test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existent directories. if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi _LT_TAGDECL([], [hardcode_action], [0], [How to hardcode a shared library path into an executable]) ])# _LT_LINKER_HARDCODE_LIBPATH # _LT_CMD_STRIPLIB # ---------------- m4_defun([_LT_CMD_STRIPLIB], [m4_require([_LT_DECL_EGREP]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) ])# _LT_CMD_STRIPLIB # _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics m4_defun([_LT_SYS_DYNAMIC_LINKER], [AC_REQUIRE([AC_CANONICAL_HOST])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_OBJDUMP])dnl m4_require([_LT_DECL_SED])dnl AC_MSG_CHECKING([dynamic linker characteristics]) m4_if([$1], [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[[4-9]]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], [shlibpath_overrides_runpath=yes])]) LDFLAGS=$save_LDFLAGS libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi _LT_DECL([], [variables_saved_for_relink], [1], [Variables whose values should be saved in libtool wrapper scripts and restored at link time]) _LT_DECL([], [need_lib_prefix], [0], [Do we need the "lib" prefix for modules?]) _LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) _LT_DECL([], [version_type], [0], [Library versioning type]) _LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) _LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) _LT_DECL([], [shlibpath_overrides_runpath], [0], [Is shlibpath searched before the hard-coded library search path?]) _LT_DECL([], [libname_spec], [1], [Format of library name prefix]) _LT_DECL([], [library_names_spec], [1], [[List of archive names. First name is the real one, the rest are links. The last name is the one that the linker finds with -lNAME]]) _LT_DECL([], [soname_spec], [1], [[The coded name of the library, if different from the real name]]) _LT_DECL([], [postinstall_cmds], [2], [Command to use after installation of a shared archive]) _LT_DECL([], [postuninstall_cmds], [2], [Command to use after uninstallation of a shared archive]) _LT_DECL([], [finish_cmds], [2], [Commands used to finish a libtool library installation in a directory]) _LT_DECL([], [finish_eval], [1], [[As "finish_cmds", except a single script fragment to be evaled but not shown]]) _LT_DECL([], [hardcode_into_libs], [0], [Whether we should hardcode library paths into libraries]) _LT_DECL([], [sys_lib_search_path_spec], [2], [Compile-time system search path for libraries]) _LT_DECL([], [sys_lib_dlsearch_path_spec], [2], [Run-time system search path for libraries]) ])# _LT_SYS_DYNAMIC_LINKER # _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- # find a file program which can recognize shared library AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi _LT_DECL([], [MAGIC_CMD], [0], [Used to examine libraries when file_magic_cmd begins with "file"])dnl ])# _LT_PATH_TOOL_PREFIX # Old name: AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) # _LT_PATH_MAGIC # -------------- # find a file program which can recognize a shared library m4_defun([_LT_PATH_MAGIC], [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# _LT_PATH_MAGIC # LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl AC_ARG_WITH([gnu-ld], [AS_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown _LT_DECL([], [deplibs_check_method], [1], [Method to check whether dependent libraries are shared objects]) _LT_DECL([], [file_magic_cmd], [1], [Command to use when deplibs_check_method == "file_magic"]) ])# _LT_CHECK_MAGIC_METHOD # LT_PATH_NM # ---------- # find the pathname to a BSD- or MS-compatible name lister AC_DEFUN([LT_PATH_NM], [AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi]) if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) AC_SUBST([DUMPBIN]) if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm AC_SUBST([NM]) _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], [lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&AS_MESSAGE_LOG_FD (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) cat conftest.out >&AS_MESSAGE_LOG_FD if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest*]) ])# LT_PATH_NM # Old names: AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AM_PROG_NM], []) dnl AC_DEFUN([AC_PROG_NM], []) # LT_LIB_M # -------- # check for math library AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac AC_SUBST([LIBM]) ])# LT_LIB_M # Old name: AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([AC_CHECK_LIBM], []) # _LT_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------- m4_defun([_LT_COMPILER_NO_RTTI], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], [Compiler flag to turn off builtin functions]) ])# _LT_COMPILER_NO_RTTI # _LT_CMD_GLOBAL_SYMBOLS # ---------------------- m4_defun([_LT_CMD_GLOBAL_SYMBOLS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([LT_PATH_NM])dnl AC_REQUIRE([LT_PATH_LD])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_TAG_COMPILER])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ const struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[[]] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], [Take the output of nm and produce a listing of raw symbols and C names]) _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], [Transform the output of nm in a proper C declaration]) _LT_DECL([global_symbol_to_c_name_address], [lt_cv_sys_global_symbol_to_c_name_address], [1], [Transform the output of nm in a C name address pair]) _LT_DECL([global_symbol_to_c_name_address_lib_prefix], [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], [Transform the output of nm in a C name address pair when lib prefix is needed]) ]) # _LT_CMD_GLOBAL_SYMBOLS # _LT_COMPILER_PIC([TAGNAME]) # --------------------------- m4_defun([_LT_COMPILER_PIC], [m4_require([_LT_TAG_COMPILER])dnl _LT_TAGVAR(lt_prog_compiler_wl, $1)= _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix[[4-9]]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; dgux*) case $cc_basename in ec++*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xlc* | xlC*) # IBM XL 8.0 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; # Lahey Fortran 8.1. lf95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; xl*) # IBM XL C 8.0/Fortran 10.1 on PPC _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ;; esac ;; esac ;; newsos6) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ;; osf3* | osf4* | osf5*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], [How to pass a linker flag through the compiler]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_TAGVAR(lt_prog_compiler_pic, $1)= _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], [Additional compiler flags for building library objects]) # # Check to make sure the static flag actually works. # wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], [Compiler flag to prevent dynamic linking]) ])# _LT_COMPILER_PIC # _LT_LINKER_SHLIBS([TAGNAME]) # ---------------------------- # See if the linker supports building shared libraries. m4_defun([_LT_LINKER_SHLIBS], [AC_REQUIRE([LT_PATH_LD])dnl AC_REQUIRE([LT_PATH_NM])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl m4_require([_LT_DECL_SED])dnl m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) m4_if([$1], [CXX], [ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) _LT_TAGVAR(link_all_deplibs, $1)=no ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ], [ runpath_var= _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_cmds, $1)= _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(old_archive_from_new_cmds, $1)= _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_TAGVAR(thread_safe_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu) _LT_TAGVAR(link_all_deplibs, $1)=no ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 _LT_TAGVAR(whole_archive_flag_spec, $1)= tmp_sharedflag='--shared' ;; xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi _LT_TAGVAR(link_all_deplibs, $1)=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='' ;; m68k) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac ;; bsdi[[45]]*) _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" AC_LINK_IFELSE(int foo(void) {}, _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ) LDFLAGS="$save_LDFLAGS" else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_TAGVAR(archive_cmds_need_lc, $1)='no' _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(ld_shlibs, $1)=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ;; esac fi fi ]) AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl _LT_DECL([], [extract_expsyms_cmds], [2], [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) _LT_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) then _LT_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ;; esac _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], [Whether or not to add -lc for building shared libraries]) _LT_TAGDECL([allow_libtool_libs_with_static_runtimes], [enable_shared_with_static_runtimes], [0], [Whether or not to disallow shared libs when runtime libs are static]) _LT_TAGDECL([], [export_dynamic_flag_spec], [1], [Compiler flag to allow reflexive dlopens]) _LT_TAGDECL([], [whole_archive_flag_spec], [1], [Compiler flag to generate shared objects directly from archives]) _LT_TAGDECL([], [compiler_needs_object], [1], [Whether the compiler copes with passing no objects directly]) _LT_TAGDECL([], [old_archive_from_new_cmds], [2], [Create an old-style archive from a shared archive]) _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], [Create a temporary old-style archive to link instead of a shared archive]) _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) _LT_TAGDECL([], [archive_expsym_cmds], [2]) _LT_TAGDECL([], [module_cmds], [2], [Commands used to build a loadable module if different from building a shared archive.]) _LT_TAGDECL([], [module_expsym_cmds], [2]) _LT_TAGDECL([], [with_gnu_ld], [1], [Whether we are building with GNU ld or not]) _LT_TAGDECL([], [allow_undefined_flag], [1], [Flag that allows shared libraries with undefined symbols to be built]) _LT_TAGDECL([], [no_undefined_flag], [1], [Flag that enforces no undefined symbols]) _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], [Flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]) _LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], [[If ld is used when linking, flag to hardcode $libdir into a binary during linking. This must work even if $libdir does not exist]]) _LT_TAGDECL([], [hardcode_libdir_separator], [1], [Whether we need a single "-rpath" flag with a separated argument]) _LT_TAGDECL([], [hardcode_direct], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the resulting binary and the resulting library dependency is "absolute", i.e impossible to change by setting ${shlibpath_var} if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_shlibpath_var], [0], [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into the resulting binary]) _LT_TAGDECL([], [hardcode_automatic], [0], [Set to "yes" if building a shared library automatically hardcodes DIR into the library and all subsequent libraries and executables linked against it]) _LT_TAGDECL([], [inherit_rpath], [0], [Set to yes if linker adds runtime paths of dependent libraries to runtime path list]) _LT_TAGDECL([], [link_all_deplibs], [0], [Whether libtool must link a program against all its dependency libraries]) _LT_TAGDECL([], [fix_srcfile_path], [1], [Fix the shell variable $srcfile for the compiler]) _LT_TAGDECL([], [always_export_symbols], [0], [Set to "yes" if exported symbols are required]) _LT_TAGDECL([], [export_symbols_cmds], [2], [The commands to list exported symbols]) _LT_TAGDECL([], [exclude_expsyms], [1], [Symbols that should not be listed in the preloaded symbols]) _LT_TAGDECL([], [include_expsyms], [1], [Symbols that must always be exported]) _LT_TAGDECL([], [prelink_cmds], [2], [Commands necessary for linking programs (against libraries) with templates]) _LT_TAGDECL([], [file_list_spec], [1], [Specify filename containing input files]) dnl FIXME: Not yet implemented dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], dnl [Compiler flag to generate thread safe objects]) ])# _LT_LINKER_SHLIBS # _LT_LANG_C_CONFIG([TAG]) # ------------------------ # Ensure that the configuration variables for a C compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_C_CONFIG], [m4_require([_LT_DECL_EGREP])dnl lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) LT_SYS_DLOPEN_SELF _LT_CMD_STRIPLIB # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_CONFIG($1) fi AC_LANG_POP CC="$lt_save_CC" ])# _LT_LANG_C_CONFIG # _LT_PROG_CXX # ------------ # Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ # compiler, we have our own version here. m4_defun([_LT_PROG_CXX], [ pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) AC_PROG_CXX if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP else _lt_caught_CXX_error=yes fi popdef([AC_MSG_ERROR]) ])# _LT_PROG_CXX dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([_LT_PROG_CXX], []) # _LT_LANG_CXX_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a C++ compiler are suitably # defined. These variables are subsequently used by _LT_CONFIG to write # the compiler configuration to `libtool'. m4_defun([_LT_LANG_CXX_CONFIG], [AC_REQUIRE([_LT_PROG_CXX])dnl m4_require([_LT_FILEUTILS_DEFAULTS])dnl m4_require([_LT_DECL_EGREP])dnl AC_LANG_PUSH(C++) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(compiler_needs_object, $1)=no _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration LT_PATH_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aix[[4-9]]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_TAGVAR(archive_cmds, $1)='' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_TAGVAR(hardcode_minus_L, $1)=yes _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty # executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. _LT_SYS_MODULE_PATH_AIX _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared # libraries. _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; darwin* | rhapsody*) _LT_DARWIN_LINKER_FEATURES($1) ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before # switch to ELF _LT_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; hpux9*) _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi _LT_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: _LT_TAGVAR(inherit_rpath, $1)=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 will use weak symbols _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; xl*) # IBM XL 8.0 on PPC, with GNU ld _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) _LT_TAGVAR(ld_shlibs, $1)=yes ;; openbsd2*) # C++ shared libraries are fairly broken _LT_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=echo else _LT_TAGVAR(ld_shlibs, $1)=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; cxx*) case $host in osf3*) _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ;; *) _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ;; esac _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' _LT_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_TAGVAR(link_all_deplibs, $1)=yes _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_TAGVAR(GCC, $1)="$GXX" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes AC_LANG_POP ])# _LT_LANG_CXX_CONFIG # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) # --------------------------------- # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. m4_defun([_LT_SYS_HIDDEN_LIBDEPS], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl # Dependencies to place before and after the object being linked: _LT_TAGVAR(predep_objects, $1)= _LT_TAGVAR(postdep_objects, $1)= _LT_TAGVAR(predeps, $1)= _LT_TAGVAR(postdeps, $1)= _LT_TAGVAR(compiler_lib_search_path, $1)= dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF int a; void foo (void) { a = 0; } _LT_EOF ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer*4 a a=0 return end _LT_EOF ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF subroutine foo implicit none integer a a=0 return end _LT_EOF ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF public class foo { private int a; public void bar (void) { a = 0; } }; _LT_EOF ]) dnl Parse the compiler output and extract the necessary dnl objects, libraries and library flags. if AC_TRY_EVAL(ac_compile); then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue else prev= fi if test "$pre_test_object_deps_done" = no; then case $p in -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" else _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$_LT_TAGVAR(postdeps, $1)"; then _LT_TAGVAR(postdeps, $1)="${prev}${p}" else _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" fi fi ;; *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$_LT_TAGVAR(predep_objects, $1)"; then _LT_TAGVAR(predep_objects, $1)="$p" else _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" fi else if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then _LT_TAGVAR(postdep_objects, $1)="$p" else _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling $1 test program" fi $RM -f confest.$objext # PORTME: override above test on systems where it is broken m4_if([$1], [CXX], [case $host_os in interix[[3-9]]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. _LT_TAGVAR(predep_objects,$1)= _LT_TAGVAR(postdep_objects,$1)= _LT_TAGVAR(postdeps,$1)= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac _LT_TAGVAR(compiler_lib_search_dirs, $1)= if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi _LT_TAGDECL([], [compiler_lib_search_dirs], [1], [The directories searched by this compiler when creating a shared library]) _LT_TAGDECL([], [predep_objects], [1], [Dependencies to place before and after the objects being linked to create a shared library]) _LT_TAGDECL([], [postdep_objects], [1]) _LT_TAGDECL([], [predeps], [1]) _LT_TAGDECL([], [postdeps], [1]) _LT_TAGDECL([], [compiler_lib_search_path], [1], [The library search path used internally by the compiler when linking a shared library]) ])# _LT_SYS_HIDDEN_LIBDEPS # _LT_PROG_F77 # ------------ # Since AC_PROG_F77 is broken, in that it returns the empty string # if there is no fortran compiler, we have our own version here. m4_defun([_LT_PROG_F77], [ pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) AC_PROG_F77 if test -z "$F77" || test "X$F77" = "Xno"; then _lt_disable_F77=yes fi popdef([AC_MSG_ERROR]) ])# _LT_PROG_F77 dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([_LT_PROG_F77], []) # _LT_LANG_F77_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for a Fortran 77 compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_F77_CONFIG], [AC_REQUIRE([_LT_PROG_F77])dnl AC_LANG_PUSH(Fortran 77) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the F77 compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_F77" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC CC=${F77-"f77"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) GCC=$G77 if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$G77" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" fi # test "$_lt_disable_F77" != yes AC_LANG_POP ])# _LT_LANG_F77_CONFIG # _LT_PROG_FC # ----------- # Since AC_PROG_FC is broken, in that it returns the empty string # if there is no fortran compiler, we have our own version here. m4_defun([_LT_PROG_FC], [ pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) AC_PROG_FC if test -z "$FC" || test "X$FC" = "Xno"; then _lt_disable_FC=yes fi popdef([AC_MSG_ERROR]) ])# _LT_PROG_FC dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([_LT_PROG_FC], []) # _LT_LANG_FC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for a Fortran compiler are # suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_FC_CONFIG], [AC_REQUIRE([_LT_PROG_FC])dnl AC_LANG_PUSH(Fortran) _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(allow_undefined_flag, $1)= _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(archive_expsym_cmds, $1)= _LT_TAGVAR(export_dynamic_flag_spec, $1)= _LT_TAGVAR(hardcode_direct, $1)=no _LT_TAGVAR(hardcode_direct_absolute, $1)=no _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_TAGVAR(hardcode_libdir_separator, $1)= _LT_TAGVAR(hardcode_minus_L, $1)=no _LT_TAGVAR(hardcode_automatic, $1)=no _LT_TAGVAR(inherit_rpath, $1)=no _LT_TAGVAR(module_cmds, $1)= _LT_TAGVAR(module_expsym_cmds, $1)= _LT_TAGVAR(link_all_deplibs, $1)=unknown _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_TAGVAR(no_undefined_flag, $1)= _LT_TAGVAR(whole_archive_flag_spec, $1)= _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for fc test sources. ac_ext=${ac_fc_srcext-f} # Object file extension for compiled fc test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # No sense in running all these tests if we already determined that # the FC compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_disable_FC" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC CC=${FC-"f95"} compiler=$CC GCC=$ac_cv_fc_compiler_gnu _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) if test -n "$compiler"; then AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[[4-9]]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" _LT_TAGVAR(LD, $1)="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... _LT_SYS_HIDDEN_LIBDEPS($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_SYS_DYNAMIC_LINKER($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi # test -n "$compiler" GCC=$lt_save_GCC CC="$lt_save_CC" fi # test "$_lt_disable_FC" != yes AC_LANG_POP ])# _LT_LANG_FC_CONFIG # _LT_LANG_GCJ_CONFIG([TAG]) # -------------------------- # Ensure that the configuration variables for the GNU Java Compiler compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_GCJ_CONFIG], [AC_REQUIRE([LT_PROG_GCJ])dnl AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC GCC=yes CC=${GCJ-"gcj"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_TAGVAR(LD, $1)="$LD" _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_TAGVAR(archive_cmds_need_lc, $1)=no _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then _LT_COMPILER_NO_RTTI($1) _LT_COMPILER_PIC($1) _LT_COMPILER_C_O($1) _LT_COMPILER_FILE_LOCKS($1) _LT_LINKER_SHLIBS($1) _LT_LINKER_HARDCODE_LIBPATH($1) _LT_CONFIG($1) fi AC_LANG_RESTORE GCC=$lt_save_GCC CC="$lt_save_CC" ])# _LT_LANG_GCJ_CONFIG # _LT_LANG_RC_CONFIG([TAG]) # ------------------------- # Ensure that the configuration variables for the Windows resource compiler # are suitably defined. These variables are subsequently used by _LT_CONFIG # to write the compiler configuration to `libtool'. m4_defun([_LT_LANG_RC_CONFIG], [AC_REQUIRE([LT_PROG_RC])dnl AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_TAG_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" lt_save_GCC=$GCC GCC= CC=${RC-"windres"} compiler=$CC _LT_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes if test -n "$compiler"; then : _LT_CONFIG($1) fi GCC=$lt_save_GCC AC_LANG_RESTORE CC="$lt_save_CC" ])# _LT_LANG_RC_CONFIG # LT_PROG_GCJ # ----------- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj,) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS)])])[]dnl ]) # Old name: AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_GCJ], []) # LT_PROG_RC # ---------- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) ]) # Old name: AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_RC], []) # _LT_DECL_EGREP # -------------- # If we don't have a new enough Autoconf to choose the best grep # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep _LT_DECL([], [GREP], [1], [A grep program that handles long lines]) _LT_DECL([], [EGREP], [1], [An ERE matcher]) _LT_DECL([], [FGREP], [1], [A literal string matcher]) dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) # _LT_DECL_OBJDUMP # -------------- # If we don't have a new enough Autoconf to choose the best objdump # available, choose the one first in the user's PATH. m4_defun([_LT_DECL_OBJDUMP], [AC_CHECK_TOOL(OBJDUMP, objdump, false) test -z "$OBJDUMP" && OBJDUMP=objdump _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) AC_SUBST([OBJDUMP]) ]) # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" _LT_DECL([], [SED], [1], [A sed program that does not truncate output]) _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED m4_ifndef([AC_PROG_SED], [ ############################################################ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # ############################################################ m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ])#AC_PROG_SED ])#m4_ifndef # Old name: AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) # _LT_CHECK_SHELL_FEATURES # ------------------------ # Find out whether the shell is Bourne or XSI compatible, # or has some other useful features. m4_defun([_LT_CHECK_SHELL_FEATURES], [AC_MSG_CHECKING([whether the shell understands some XSI constructs]) # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes AC_MSG_RESULT([$xsi_shell]) _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) AC_MSG_CHECKING([whether the shell understands "+="]) lt_shell_append=no ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes AC_MSG_RESULT([$lt_shell_append]) _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ])# _LT_CHECK_SHELL_FEATURES # _LT_PROG_XSI_SHELLFNS # --------------------- # Bourne and XSI compatible variants of some useful shell functions. m4_defun([_LT_PROG_XSI_SHELLFNS], [case $xsi_shell in yes) cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac } # func_basename file func_basename () { func_basename_result="${1##*/}" } # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}" } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). func_stripname () { # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"} } # func_opt_split func_opt_split () { func_opt_split_opt=${1%%=*} func_opt_split_arg=${1#*=} } # func_lo2o object func_lo2o () { case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac } # func_xform libobj-or-source func_xform () { func_xform_result=${1%.*}.lo } # func_arith arithmetic-term... func_arith () { func_arith_result=$(( $[*] )) } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=${#1} } _LT_EOF ;; *) # Bourne compatible functions. cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_basename file func_basename () { func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } dnl func_dirname_and_basename dnl A portable version of this function is already defined in general.m4sh dnl so there is no need for it here. # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac } # sed scripts: my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' my_sed_long_arg='1s/^-[[^=]]*=//' # func_opt_split func_opt_split () { func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` } # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` } # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` } # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "$[@]"` } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` } _LT_EOF esac case $lt_shell_append in yes) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$[1]+=\$[2]" } _LT_EOF ;; *) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$[1]=\$$[1]\$[2]" } _LT_EOF ;; esac ]) opendbx-1.4.6/m4/ltsugar.m40000644000175000017500000001042411765211273012353 00000000000000# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # serial 6 ltsugar.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) # lt_join(SEP, ARG1, [ARG2...]) # ----------------------------- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their # associated separator. # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier # versions in m4sugar had bugs. m4_define([lt_join], [m4_if([$#], [1], [], [$#], [2], [[$2]], [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) m4_define([_lt_join], [m4_if([$#$2], [2], [], [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) # lt_car(LIST) # lt_cdr(LIST) # ------------ # Manipulate m4 lists. # These macros are necessary as long as will still need to support # Autoconf-2.59 which quotes differently. m4_define([lt_car], [[$1]]) m4_define([lt_cdr], [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], [$#], 1, [], [m4_dquote(m4_shift($@))])]) m4_define([lt_unquote], $1) # lt_append(MACRO-NAME, STRING, [SEPARATOR]) # ------------------------------------------ # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. # Note that neither SEPARATOR nor STRING are expanded; they are appended # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). # No SEPARATOR is output if MACRO-NAME was previously undefined (different # than defined and empty). # # This macro is needed until we can rely on Autoconf 2.62, since earlier # versions of m4sugar mistakenly expanded SEPARATOR but not STRING. m4_define([lt_append], [m4_define([$1], m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) # ---------------------------------------------------------- # Produce a SEP delimited list of all paired combinations of elements of # PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list # has the form PREFIXmINFIXSUFFIXn. # Needed until we can rely on m4_combine added in Autoconf 2.62. m4_define([lt_combine], [m4_if(m4_eval([$# > 3]), [1], [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl [[m4_foreach([_Lt_prefix], [$2], [m4_foreach([_Lt_suffix], ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) # ----------------------------------------------------------------------- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. m4_define([lt_if_append_uniq], [m4_ifdef([$1], [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], [lt_append([$1], [$2], [$3])$4], [$5])], [lt_append([$1], [$2], [$3])$4])]) # lt_dict_add(DICT, KEY, VALUE) # ----------------------------- m4_define([lt_dict_add], [m4_define([$1($2)], [$3])]) # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) # -------------------------------------------- m4_define([lt_dict_add_subkey], [m4_define([$1($2:$3)], [$4])]) # lt_dict_fetch(DICT, KEY, [SUBKEY]) # ---------------------------------- m4_define([lt_dict_fetch], [m4_ifval([$3], m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) # ----------------------------------------------------------------- m4_define([lt_if_dict_fetch], [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], [$5], [$6])]) # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) # -------------------------------------------------------------- m4_define([lt_dict_filter], [m4_if([$5], [], [], [lt_join(m4_quote(m4_default([$4], [[, ]])), lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) opendbx-1.4.6/m4/gettext.m40000644000175000017500000003457011425153451012362 00000000000000# gettext.m4 serial 60 (gettext-0.17) dnl Copyright (C) 1995-2007 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Authors: dnl Ulrich Drepper , 1995-2000. dnl Bruno Haible , 2000-2006. dnl Macro to add for using GNU gettext. dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The dnl default (if it is not specified or empty) is 'no-libtool'. dnl INTLSYMBOL should be 'external' for packages with no intl directory, dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. dnl If INTLSYMBOL is 'use-libtool', then a libtool library dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, dnl depending on --{enable,disable}-{shared,static} and on the presence of dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library dnl $(top_builddir)/intl/libintl.a will be created. dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext dnl implementations (in libc or libintl) without the ngettext() function dnl will be ignored. If NEEDSYMBOL is specified and is dnl 'need-formatstring-macros', then GNU gettext implementations that don't dnl support the ISO C 99 formatstring macros will be ignored. dnl INTLDIR is used to find the intl libraries. If empty, dnl the value `$(top_builddir)/intl/' is used. dnl dnl The result of the configuration is one of three cases: dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled dnl and used. dnl Catalog format: GNU --> install in $(datadir) dnl Catalog extension: .mo after installation, .gmo in source tree dnl 2) GNU gettext has been found in the system's C library. dnl Catalog format: GNU --> install in $(datadir) dnl Catalog extension: .mo after installation, .gmo in source tree dnl 3) No internationalization, always use English msgid. dnl Catalog format: none dnl Catalog extension: none dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. dnl The use of .gmo is historical (it was needed to avoid overwriting the dnl GNU format catalogs when building on a platform with an X/Open gettext), dnl but we keep it in order not to force irrelevant filename changes on the dnl maintainers. dnl AC_DEFUN([AM_GNU_GETTEXT], [ dnl Argument checking. ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT ])])])])]) ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT ])])])]) define([gt_included_intl], ifelse([$1], [external], ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), [yes])) define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) gt_NEEDS_INIT AM_GNU_GETTEXT_NEED([$2]) AC_REQUIRE([AM_PO_SUBDIRS])dnl ifelse(gt_included_intl, yes, [ AC_REQUIRE([AM_INTL_SUBDIR])dnl ]) dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) dnl Sometimes libintl requires libiconv, so first search for libiconv. dnl Ideally we would do this search only after the dnl if test "$USE_NLS" = "yes"; then dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT dnl the configure script would need to contain the same shell code dnl again, outside any 'if'. There are two solutions: dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not dnl documented, we avoid it. ifelse(gt_included_intl, yes, , [ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) ]) dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation. gt_INTL_MACOSX dnl Set USE_NLS. AC_REQUIRE([AM_NLS]) ifelse(gt_included_intl, yes, [ BUILD_INCLUDED_LIBINTL=no USE_INCLUDED_LIBINTL=no ]) LIBINTL= LTLIBINTL= POSUB= dnl Add a version number to the cache macros. case " $gt_needs " in *" need-formatstring-macros "*) gt_api_version=3 ;; *" need-ngettext "*) gt_api_version=2 ;; *) gt_api_version=1 ;; esac gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" dnl If we use NLS figure out what method if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no ifelse(gt_included_intl, yes, [ AC_MSG_CHECKING([whether included gettext is requested]) AC_ARG_WITH(included-gettext, [ --with-included-gettext use the GNU gettext library included here], nls_cv_force_use_gnu_gettext=$withval, nls_cv_force_use_gnu_gettext=no) AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then ]) dnl User does not insist on using GNU NLS library. Figure out what dnl to use. If GNU gettext is available we use this. Else we have dnl to fall back to GNU NLS library. if test $gt_api_version -ge 3; then gt_revision_test_code=' #ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif changequote(,)dnl typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; changequote([,])dnl ' else gt_revision_test_code= fi if test $gt_api_version -ge 2; then gt_expression_test_code=' + * ngettext ("", "", 0)' else gt_expression_test_code= fi AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], [AC_TRY_LINK([#include $gt_revision_test_code extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings;], [bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings], [eval "$gt_func_gnugettext_libc=yes"], [eval "$gt_func_gnugettext_libc=no"])]) if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then dnl Sometimes libintl requires libiconv, so first search for libiconv. ifelse(gt_included_intl, yes, , [ AM_ICONV_LINK ]) dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) dnl because that would add "-liconv" to LIBINTL and LTLIBINTL dnl even if libiconv doesn't exist. AC_LIB_LINKFLAGS_BODY([intl]) AC_CACHE_CHECK([for GNU gettext in libintl], [$gt_func_gnugettext_libintl], [gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" dnl Now see whether libintl exists and does not depend on libiconv. AC_TRY_LINK([#include $gt_revision_test_code extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *);], [bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], [eval "$gt_func_gnugettext_libintl=yes"], [eval "$gt_func_gnugettext_libintl=no"]) dnl Now see whether libintl exists and depends on libiconv. if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" AC_TRY_LINK([#include $gt_revision_test_code extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *);], [bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], [LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" eval "$gt_func_gnugettext_libintl=yes" ]) fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS"]) fi dnl If an already present or preinstalled GNU gettext() is found, dnl use it. But if this macro is used in GNU gettext, and GNU dnl gettext is already preinstalled in libintl, we update this dnl libintl. (Cf. the install rule in intl/Makefile.in.) if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else dnl Reset the values set by searching for libintl. LIBINTL= LTLIBINTL= INCINTL= fi ifelse(gt_included_intl, yes, [ if test "$gt_use_preinstalled_gnugettext" != "yes"; then dnl GNU gettext is not found in the C library. dnl Fall back on included GNU gettext library. nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions used to generate GNU NLS library. BUILD_INCLUDED_LIBINTL=yes USE_INCLUDED_LIBINTL=yes LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` fi CATOBJEXT= if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions to use GNU gettext tools. CATOBJEXT=.gmo fi ]) if test -n "$INTL_MACOSX_LIBS"; then if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Some extra flags are needed during linking. LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" fi fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if translation of program messages to the user's native language is requested.]) else USE_NLS=no fi fi AC_MSG_CHECKING([whether to use NLS]) AC_MSG_RESULT([$USE_NLS]) if test "$USE_NLS" = "yes"; then AC_MSG_CHECKING([where the gettext function comes from]) if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi AC_MSG_RESULT([$gt_source]) fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then AC_MSG_CHECKING([how to link with libintl]) AC_MSG_RESULT([$LIBINTL]) AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) fi dnl For backward compatibility. Some packages may be using this. AC_DEFINE(HAVE_GETTEXT, 1, [Define if the GNU gettext() function is already present or preinstalled.]) AC_DEFINE(HAVE_DCGETTEXT, 1, [Define if the GNU dcgettext() function is already present or preinstalled.]) fi dnl We need to process the po/ directory. POSUB=po fi ifelse(gt_included_intl, yes, [ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL dnl to 'yes' because some of the testsuite requires it. if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then BUILD_INCLUDED_LIBINTL=yes fi dnl Make all variables we use known to autoconf. AC_SUBST(BUILD_INCLUDED_LIBINTL) AC_SUBST(USE_INCLUDED_LIBINTL) AC_SUBST(CATOBJEXT) dnl For backward compatibility. Some configure.ins may be using this. nls_cv_header_intl= nls_cv_header_libgt= dnl For backward compatibility. Some Makefiles may be using this. DATADIRNAME=share AC_SUBST(DATADIRNAME) dnl For backward compatibility. Some Makefiles may be using this. INSTOBJEXT=.mo AC_SUBST(INSTOBJEXT) dnl For backward compatibility. Some Makefiles may be using this. GENCAT=gencat AC_SUBST(GENCAT) dnl For backward compatibility. Some Makefiles may be using this. INTLOBJS= if test "$USE_INCLUDED_LIBINTL" = yes; then INTLOBJS="\$(GETTOBJS)" fi AC_SUBST(INTLOBJS) dnl Enable libtool support if the surrounding package wishes it. INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) ]) dnl For backward compatibility. Some Makefiles may be using this. INTLLIBS="$LIBINTL" AC_SUBST(INTLLIBS) dnl Make all documented variables known to autoconf. AC_SUBST(LIBINTL) AC_SUBST(LTLIBINTL) AC_SUBST(POSUB) ]) dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. m4_define([gt_NEEDS_INIT], [ m4_divert_text([DEFAULTS], [gt_needs=]) m4_define([gt_NEEDS_INIT], []) ]) dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) AC_DEFUN([AM_GNU_GETTEXT_NEED], [ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) ]) dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) opendbx-1.4.6/m4/lib-link.m40000644000175000017500000007205511425153451012377 00000000000000# lib-link.m4 serial 13 (gettext-0.17) dnl Copyright (C) 2001-2007 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. AC_PREREQ(2.54) dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and dnl augments the CPPFLAGS variable. dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ AC_LIB_LINKFLAGS_BODY([$1], [$2]) ac_cv_lib[]Name[]_libs="$LIB[]NAME" ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" ac_cv_lib[]Name[]_cppflags="$INC[]NAME" ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" ]) LIB[]NAME="$ac_cv_lib[]Name[]_libs" LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" INC[]NAME="$ac_cv_lib[]Name[]_cppflags" LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) AC_SUBST([LIB]NAME[_PREFIX]) dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the dnl results of this search when this library appears as a dependency. HAVE_LIB[]NAME=yes undefine([Name]) undefine([NAME]) ]) dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) dnl searches for libname and the libraries corresponding to explicit and dnl implicit dependencies, together with the specified include files and dnl the ability to compile and link the specified testcode. If found, it dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], [ AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) AC_REQUIRE([AC_LIB_RPATH]) define([Name],[translit([$1],[./-], [___])]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME dnl accordingly. AC_LIB_LINKFLAGS_BODY([$1], [$2]) dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, dnl because if the user has installed lib[]Name and not disabled its use dnl via --without-lib[]Name-prefix, he wants to use it. ac_save_CPPFLAGS="$CPPFLAGS" AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ ac_save_LIBS="$LIBS" LIBS="$LIBS $LIB[]NAME" AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) LIBS="$ac_save_LIBS" ]) if test "$ac_cv_lib[]Name" = yes; then HAVE_LIB[]NAME=yes AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) AC_MSG_CHECKING([how to link with lib[]$1]) AC_MSG_RESULT([$LIB[]NAME]) else HAVE_LIB[]NAME=no dnl If $LIB[]NAME didn't lead to a usable library, we don't need dnl $INC[]NAME either. CPPFLAGS="$ac_save_CPPFLAGS" LIB[]NAME= LTLIB[]NAME= LIB[]NAME[]_PREFIX= fi AC_SUBST([HAVE_LIB]NAME) AC_SUBST([LIB]NAME) AC_SUBST([LTLIB]NAME) AC_SUBST([LIB]NAME[_PREFIX]) undefine([Name]) undefine([NAME]) ]) dnl Determine the platform dependent parameters needed to use rpath: dnl acl_libext, dnl acl_shlibext, dnl acl_hardcode_libdir_flag_spec, dnl acl_hardcode_libdir_separator, dnl acl_hardcode_direct, dnl acl_hardcode_minus_L. AC_DEFUN([AC_LIB_RPATH], [ dnl Tell automake >= 1.10 to complain if config.rpath is missing. m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done ]) wl="$acl_cv_wl" acl_libext="$acl_cv_libext" acl_shlibext="$acl_cv_shlibext" acl_libname_spec="$acl_cv_libname_spec" acl_library_names_spec="$acl_cv_library_names_spec" acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" acl_hardcode_direct="$acl_cv_hardcode_direct" acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" dnl Determine whether the user wants rpath handling at all. AC_ARG_ENABLE(rpath, [ --disable-rpath do not hardcode runtime library paths], :, enable_rpath=yes) ]) dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and dnl the libraries corresponding to explicit and implicit dependencies. dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. AC_DEFUN([AC_LIB_LINKFLAGS_BODY], [ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) dnl Autoconf >= 2.61 supports dots in --with options. define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])]) dnl By default, look in $includedir and $libdir. use_additional=yes AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix], [ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir], [ if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then AC_LIB_WITH_FINAL_PREFIX([ eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" ]) else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi ]) dnl Search the library and its dependencies in $additional_libdir and dnl $LDFLAGS. Using breadth-first-seach. LIB[]NAME= LTLIB[]NAME= INC[]NAME= LIB[]NAME[]_PREFIX= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='$1 $2' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" dnl See if it was already located by an earlier AC_LIB_LINKFLAGS dnl or AC_LIB_HAVE_LINKFLAGS call. uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" else dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined dnl that this library doesn't exist. So just drop it. : fi else dnl Search the library lib$name in $additional_libdir and $LDFLAGS dnl and the already constructed $LIBNAME/$LTLIBNAME. found_dir= found_la= found_so= found_a= eval libname=\"$acl_libname_spec\" # typically: libname=lib$name if test -n "$acl_shlibext"; then shrext=".$acl_shlibext" # typically: shrext=.so else shrext= fi if test $use_additional = yes; then dir="$additional_libdir" dnl The same code as in the loop below: dnl First look for a shared library. if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi dnl Then look for a static library. if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` dnl First look for a shared library. if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi dnl Then look for a static library. if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then dnl Found the library. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then dnl Linking with a shared library. We attempt to hardcode its dnl directory into the executable's runpath, unless it's the dnl standard /usr/lib. if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then dnl No hardcoding is needed. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl Use an explicit option to hardcode DIR into the resulting dnl binary. dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi dnl The hardcoding into $LIBNAME is system dependent. if test "$acl_hardcode_direct" = yes; then dnl Using DIR/libNAME.so during linking hardcodes DIR into the dnl resulting binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then dnl Use an explicit option to hardcode DIR into the resulting dnl binary. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else dnl Rely on "-L$found_dir". dnl But don't add it if it's already contained in the LDFLAGS dnl or the already constructed $LIBNAME haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" fi if test "$acl_hardcode_minus_L" != no; then dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" else dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH dnl here, because this doesn't fit in flags passed to the dnl compiler. So give up. No hardcoding. This affects only dnl very old systems. dnl FIXME: Not sure whether we should use dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" dnl here. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then dnl Linking with a static library. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" else dnl We shouldn't come here, but anyway it's good to have a dnl fallback. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" fi fi dnl Assume the include files are nearby. additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` LIB[]NAME[]_PREFIX="$basedir" additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then dnl Potentially add $additional_includedir to $INCNAME. dnl But don't add it dnl 1. if it's the standard /usr/include, dnl 2. if it's /usr/local/include and we are using GCC on Linux, dnl 3. if it's already present in $CPPFLAGS or the already dnl constructed $INCNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INC[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then dnl Really add $additional_includedir to $INCNAME. INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" fi fi fi fi fi dnl Look for dependencies. if test -n "$found_la"; then dnl Read the .la file. It defines the variables dnl dlname, library_names, old_library, dependency_libs, current, dnl age, revision, installed, dlopen, dlpreopen, libdir. save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" dnl We use only dependency_libs. for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. dnl But don't add it dnl 1. if it's the standard /usr/lib, dnl 2. if it's /usr/local/lib and we are using GCC on Linux, dnl 3. if it's already present in $LDFLAGS or the already dnl constructed $LIBNAME, dnl 4. if it doesn't exist as a directory. if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LIBNAME. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIB[]NAME; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then dnl Really add $additional_libdir to $LTLIBNAME. LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then dnl Potentially add DIR to rpathdirs. dnl The rpathdirs will be appended to $LIBNAME at the end. haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi dnl Potentially add DIR to ltrpathdirs. dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) dnl Handle this in the next round. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) dnl Handle this in the next round. Throw away the .la's dnl directory; it is already contained in a preceding -L dnl option. names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) dnl Most likely an immediate library name. LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" ;; esac done fi else dnl Didn't find the library; assume it is in the system directories dnl known to the linker and runtime loader. (All the system dnl directories known to the linker should also be known to the dnl runtime loader, otherwise the system is severely misconfigured.) LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$acl_hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user must dnl pass all path elements in one option. We can arrange that for a dnl single library, but not when more than one $LIBNAMEs are used. alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" else dnl The -rpath options are cumulative. for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then dnl When using libtool, the option that works for both libraries and dnl executables is -R. The -R options are cumulative. for found_dir in $ltrpathdirs; do LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" done fi ]) dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, dnl unless already present in VAR. dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes dnl contains two or three consecutive elements that belong together. AC_DEFUN([AC_LIB_APPENDTOVAR], [ for element in [$2]; do haveit= for x in $[$1]; do AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then [$1]="${[$1]}${[$1]:+ }$element" fi done ]) dnl For those cases where a variable contains several -L and -l options dnl referring to unknown libraries and directories, this macro determines the dnl necessary additional linker options for the runtime path. dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) dnl sets LDADDVAR to linker options needed together with LIBSVALUE. dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, dnl otherwise linking without libtool is assumed. AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], [ AC_REQUIRE([AC_LIB_RPATH]) AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) $1= if test "$enable_rpath" != no; then if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then dnl Use an explicit option to hardcode directories into the resulting dnl binary. rpathdirs= next= for opt in $2; do if test -n "$next"; then dir="$next" dnl No need to hardcode the standard /usr/lib. if test "X$dir" != "X/usr/$acl_libdirstem"; then rpathdirs="$rpathdirs $dir" fi next= else case $opt in -L) next=yes ;; -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` dnl No need to hardcode the standard /usr/lib. if test "X$dir" != "X/usr/$acl_libdirstem"; then rpathdirs="$rpathdirs $dir" fi next= ;; *) next= ;; esac fi done if test "X$rpathdirs" != "X"; then if test -n ""$3""; then dnl libtool is used for linking. Use -R options. for dir in $rpathdirs; do $1="${$1}${$1:+ }-R$dir" done else dnl The linker is used for linking directly. if test -n "$acl_hardcode_libdir_separator"; then dnl Weird platform: only the last -rpath option counts, the user dnl must pass all path elements in one option. alldirs= for dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" $1="$flag" else dnl The -rpath options are cumulative. for dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" $1="${$1}${$1:+ }$flag" done fi fi fi fi fi AC_SUBST([$1]) ]) opendbx-1.4.6/COPYING0000644000175000017500000006350411425153446011152 00000000000000 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright (C) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice That's all there is to it! opendbx-1.4.6/config.guess0000755000175000017500000013105411425153453012431 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. timestamp='2009-06-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) eval $set_cc_for_build SUN_ARCH="i386" # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then SUN_ARCH="x86_64" fi fi echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:[3456]*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; EM64T | authenticamd | genuineintel) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; 8664:Windows_NT:*) echo x86_64-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-gnu else echo ${UNAME_MACHINE}-unknown-linux-gnueabi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=${UNAME_MACHINE}el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=${UNAME_MACHINE} #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; padre:Linux:*:*) echo sparc-unknown-linux-gnu exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^LIBC/{ s: ::g p }'`" test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit } test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: opendbx-1.4.6/po/0000755000175000017500000000000011765214162010605 500000000000000opendbx-1.4.6/po/stamp-po0000644000175000017500000000001211765214162012201 00000000000000timestamp opendbx-1.4.6/po/de.gmo0000644000175000017500000000352211765214162011623 00000000000000Þ•´LÀÁ×"ó)8G+Y… ¤²Êå ù %3XM8¦$ß)%.'T|™C¹-ý+%>d Ÿ"À ã&&+     Backend error occuredConnecting to server failedIncorrect size of allocated memoryInvalid capabilityInvalid handleInvalid optionInvalid parameterLoading backend library %s, %s or %s failedLoading backend library failedNot supportedOpening database failedOperation is not availableOption is read onlyOut of memorySetting option failedSuccessUnknown errorWaiting for result failedProject-Id-Version: OpenDBX 1.3.0 Report-Msgid-Bugs-To: norbert@linuxnetworks.de POT-Creation-Date: 2012-06-10 23:58+0200 PO-Revision-Date: 2007-02-18 00:00+0100 Last-Translator: Norbert Sendetzky Language-Team: de MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Es ist ein Fehler in der Datenbankbibliothek aufgetretenKeine Verbindung zum Server möglichReservierter Speicher hat falsche GrösseFähigkeit im Treiber nicht vorhandenUngültige Datenbankreferenz übergebenUngültige Option übergebenUngültiges Argument übergebenDer Datenbanktreiber konnte nicht in %s, %s oder %s gefunden werdenDas Laden der Datenbankbibliothek schlug fehlNicht unterstütztDas Öffnen der Datenbank schlug fehlFunktion ist nicht vorhandenOption ist nicht veränderbarKein weiterer Speicher vorhandenOption konnte nicht gesetzt werdenAufruf erfolgreich abgeschlossenEin unbekannter Fehler ist aufgetretenAuf das Resultat zu warten schlug fehlopendbx-1.4.6/po/POTFILES.in0000644000175000017500000000032211425153451012273 00000000000000# List of source files which contain translatable strings. lib/odbx.c lib/odbxlib.c backends/mssql/mssql_basic.c backends/oracle/oracle_basic.c backends/sqlite/sqlite_basic.c backends/sqlite3/sqlite3_basic.c opendbx-1.4.6/po/en@quot.gmo0000644000175000017500000000325011765214162012644 00000000000000Þ•¼\ÐÑç"&9HW+i,•Â áï" 6DZ bpdŠï"!DWfu+‡,³à ÿ %@ Tbx €Ž     Backend error occuredConnecting to server failedIncorrect size of allocated memoryInvalid capabilityInvalid handleInvalid optionInvalid parameterLoading backend library %s, %s or %s failedLoading backend library %s, %s or %s failed Loading backend library failedNot supportedOpening database failedOperation is not availableOption is read onlyOut of memorySetting option failedSuccessUnknown errorWaiting for result failedProject-Id-Version: opendbx 1.4.6 Report-Msgid-Bugs-To: norbert@linuxnetworks.de POT-Creation-Date: 2012-06-10 23:58+0200 PO-Revision-Date: 2012-06-10 23:58+0200 Last-Translator: Automatically generated Language-Team: none MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=(n != 1); Backend error occuredConnecting to server failedIncorrect size of allocated memoryInvalid capabilityInvalid handleInvalid optionInvalid parameterLoading backend library %s, %s or %s failedLoading backend library %s, %s or %s failed Loading backend library failedNot supportedOpening database failedOperation is not availableOption is read onlyOut of memorySetting option failedSuccessUnknown errorWaiting for result failedopendbx-1.4.6/po/Makevars0000644000175000017500000000344511425153451012223 00000000000000# Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = $(PACKAGE) # These two variables depend on the location of this directory. subdir = po top_builddir = .. # These options get passed to xgettext. XGETTEXT_OPTIONS = --keyword=gettext_noop # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Free Software Foundation, Inc. # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = norbert@linuxnetworks.de # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = opendbx-1.4.6/po/boldquot.sed0000644000175000017500000000033111425153451013044 00000000000000s/"\([^"]*\)"/“\1â€/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“â€/""/g s/“/“/g s/â€/â€/g s/‘/‘/g s/’/’/g opendbx-1.4.6/po/quot.sed0000644000175000017500000000023111425153451012202 00000000000000s/"\([^"]*\)"/“\1â€/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“â€/""/g opendbx-1.4.6/po/insert-header.sin0000644000175000017500000000124011425153451013763 00000000000000# Sed script that inserts the file called HEADER before the header entry. # # At each occurrence of a line starting with "msgid ", we execute the following # commands. At the first occurrence, insert the file. At the following # occurrences, do nothing. The distinction between the first and the following # occurrences is achieved by looking at the hold space. /^msgid /{ x # Test if the hold space is empty. s/m/m/ ta # Yes it was empty. First occurrence. Read the file. r HEADER # Output the file's contents by reading the next line. But don't lose the # current line while doing this. g N bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } opendbx-1.4.6/po/ChangeLog0000644000175000017500000000014011425153451012266 000000000000002009-08-29 gettextize * Makefile.in.in: Upgrade to gettext-0.17. opendbx-1.4.6/po/Makefile.in.in0000644000175000017500000003552411425153451013204 00000000000000# Makefile for PO directory in any package using GNU gettext. # Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU General Public # License but which still want to provide support for the GNU gettext # functionality. # Please note that the actual code of GNU gettext is covered by the GNU # General Public License and is *not* in the public domain. # # Origin: gettext-0.17 GETTEXT_MACRO_VERSION = 0.17 PACKAGE = @PACKAGE@ VERSION = @VERSION@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ SHELL = /bin/sh @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datarootdir = @datarootdir@ datadir = @datadir@ localedir = @localedir@ gettextsrcdir = $(datadir)/gettext/po INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ # We use $(mkdir_p). # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, # @install_sh@ does not start with $(SHELL), so we add it. # In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake # versions, $(mkinstalldirs) and $(install_sh) are unused. mkinstalldirs = $(SHELL) @install_sh@ -d install_sh = $(SHELL) @install_sh@ MKDIR_P = @MKDIR_P@ mkdir_p = @mkdir_p@ GMSGFMT_ = @GMSGFMT@ GMSGFMT_no = @GMSGFMT@ GMSGFMT_yes = @GMSGFMT_015@ GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) MSGFMT_ = @MSGFMT@ MSGFMT_no = @MSGFMT@ MSGFMT_yes = @MSGFMT_015@ MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) XGETTEXT_ = @XGETTEXT@ XGETTEXT_no = @XGETTEXT@ XGETTEXT_yes = @XGETTEXT_015@ XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) MSGMERGE = msgmerge MSGMERGE_UPDATE = @MSGMERGE@ --update MSGINIT = msginit MSGCONV = msgconv MSGFILTER = msgfilter POFILES = @POFILES@ GMOFILES = @GMOFILES@ UPDATEPOFILES = @UPDATEPOFILES@ DUMMYPOFILES = @DUMMYPOFILES@ DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) POTFILES = \ CATALOGS = @CATALOGS@ # Makevars gets inserted here. (Don't remove this line!) .SUFFIXES: .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ mv t-$@ $@ all: check-macro-version all-@USE_NLS@ all-yes: stamp-po all-no: # Ensure that the gettext macros and this Makefile.in.in are in sync. check-macro-version: @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ exit 1; \ } # $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no # internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because # we don't want to bother translators with empty POT files). We assume that # LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. # In this case, stamp-po is a nop (i.e. a phony target). # stamp-po is a timestamp denoting the last time at which the CATALOGS have # been loosely updated. Its purpose is that when a developer or translator # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent # invocations of "make" will do nothing. This timestamp would not be necessary # if updating the $(CATALOGS) would always touch them; however, the rule for # $(POFILES) has been designed to not touch files that don't need to be # changed. stamp-po: $(srcdir)/$(DOMAIN).pot test ! -f $(srcdir)/$(DOMAIN).pot || \ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) @test ! -f $(srcdir)/$(DOMAIN).pot || { \ echo "touch stamp-po" && \ echo timestamp > stamp-poT && \ mv stamp-poT stamp-po; \ } # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. # This target rebuilds $(DOMAIN).pot; it is an expensive operation. # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ package_gnu='GNU '; \ else \ package_gnu=''; \ fi; \ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ else \ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ fi; \ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ *) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --package-name="$${package_gnu}@PACKAGE@" \ --package-version='@VERSION@' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ esac test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ else \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ else \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ } # This rule has no dependencies: we don't need to update $(DOMAIN).pot at # every "make" invocation, only create it when it is missing. # Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update # This target rebuilds a PO file if $(DOMAIN).pot has changed. # Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(srcdir)/$(DOMAIN).pot @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ if test -f "$(srcdir)/$${lang}.po"; then \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \ else \ $(MAKE) $${lang}.po-create; \ fi install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all $(mkdir_p) $(DESTDIR)$(datadir) @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ fi; \ done; \ done install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi installdirs-data-no: installdirs-data-yes: $(mkdir_p) $(DESTDIR)$(datadir) @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ fi; \ done; \ done # Define this as empty until I found a useful application. installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi uninstall-data-no: uninstall-data-yes: catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ done; \ done check: all info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: rm -f remove-potcdate.sed rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES *.mo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(MAKE) update-po @$(MAKE) dist2 # This is a separate target because 'update-po' must be executed before. dist2: stamp-po $(DISTFILES) dists="$(DISTFILES)"; \ if test "$(PACKAGE)" = "gettext-tools"; then \ dists="$$dists Makevars.template"; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ dists="$$dists $(DOMAIN).pot stamp-po"; \ fi; \ if test -f $(srcdir)/ChangeLog; then \ dists="$$dists ChangeLog"; \ fi; \ for i in 0 1 2 3 4 5 6 7 8 9; do \ if test -f $(srcdir)/ChangeLog.$$i; then \ dists="$$dists ChangeLog.$$i"; \ fi; \ done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ cp -p $$file $(distdir) || exit 1; \ else \ cp -p $(srcdir)/$$file $(distdir) || exit 1; \ fi; \ done update-po: Makefile $(MAKE) $(DOMAIN).pot-update test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo # General rule for creating PO files. .nop.po-create: @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ exit 1 # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ cd $(top_builddir) \ && $(SHELL) ./config.status $(subdir)/$@.in po-directories force: # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/po/en@quot.header0000644000175000017500000000226311425153451013311 00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # opendbx-1.4.6/po/remove-potcdate.sin0000644000175000017500000000066011425153451014334 00000000000000# Sed script that remove the POT-Creation-Date line in the header entry # from a POT file. # # The distinction between the first and the following occurrences of the # pattern is achieved by looking at the hold space. /^"POT-Creation-Date: .*"$/{ x # Test if the hold space is empty. s/P/P/ ta # Yes it was empty. First occurrence. Remove the line. g d bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } opendbx-1.4.6/po/en@quot.po0000644000175000017500000000676211765214162012513 00000000000000# English translations for opendbx package. # Copyright (C) 2012 Free Software Foundation, Inc. # This file is distributed under the same license as the opendbx package. # Automatically generated, 2012. # # All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # msgid "" msgstr "" "Project-Id-Version: opendbx 1.4.6\n" "Report-Msgid-Bugs-To: norbert@linuxnetworks.de\n" "POT-Creation-Date: 2012-06-10 23:58+0200\n" "PO-Revision-Date: 2012-06-10 23:58+0200\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: lib/odbx.c:21 msgid "Success" msgstr "Success" #: lib/odbx.c:22 msgid "Backend error occured" msgstr "Backend error occured" #: lib/odbx.c:23 msgid "Invalid capability" msgstr "Invalid capability" #: lib/odbx.c:24 backends/sqlite3/sqlite3_basic.c:53 msgid "Invalid parameter" msgstr "Invalid parameter" #: lib/odbx.c:25 msgid "Out of memory" msgstr "Out of memory" #: lib/odbx.c:26 msgid "Incorrect size of allocated memory" msgstr "Incorrect size of allocated memory" #: lib/odbx.c:27 msgid "Loading backend library failed" msgstr "Loading backend library failed" #: lib/odbx.c:28 msgid "Operation is not available" msgstr "Operation is not available" #: lib/odbx.c:29 msgid "Invalid option" msgstr "Invalid option" #: lib/odbx.c:30 msgid "Option is read only" msgstr "Option is read only" #: lib/odbx.c:31 msgid "Setting option failed" msgstr "Setting option failed" #: lib/odbx.c:32 msgid "Waiting for result failed" msgstr "Waiting for result failed" #: lib/odbx.c:33 msgid "Not supported" msgstr "Not supported" #: lib/odbx.c:34 backends/oracle/oracle_basic.c:56 msgid "Invalid handle" msgstr "Invalid handle" #: lib/odbxlib.c:148 #, c-format msgid "Loading backend library %s, %s or %s failed" msgstr "Loading backend library %s, %s or %s failed" #: lib/odbxlib.c:235 #, c-format msgid "Loading backend library %s, %s or %s failed\n" msgstr "Loading backend library %s, %s or %s failed\n" #: backends/mssql/mssql_basic.c:52 msgid "Connecting to server failed" msgstr "Connecting to server failed" #: backends/sqlite/sqlite_basic.c:53 backends/sqlite3/sqlite3_basic.c:54 msgid "Opening database failed" msgstr "Opening database failed" #: backends/sqlite3/sqlite3_basic.c:52 msgid "Unknown error" msgstr "Unknown error" opendbx-1.4.6/po/de.po0000644000175000017500000000513711765214162011463 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: OpenDBX 1.3.0\n" "Report-Msgid-Bugs-To: norbert@linuxnetworks.de\n" "POT-Creation-Date: 2012-06-10 23:58+0200\n" "PO-Revision-Date: 2007-02-18 00:00+0100\n" "Last-Translator: Norbert Sendetzky \n" "Language-Team: de \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: lib/odbx.c:21 msgid "Success" msgstr "Aufruf erfolgreich abgeschlossen" #: lib/odbx.c:22 msgid "Backend error occured" msgstr "Es ist ein Fehler in der Datenbankbibliothek aufgetreten" #: lib/odbx.c:23 msgid "Invalid capability" msgstr "Fähigkeit im Treiber nicht vorhanden" #: lib/odbx.c:24 backends/sqlite3/sqlite3_basic.c:53 msgid "Invalid parameter" msgstr "Ungültiges Argument übergeben" #: lib/odbx.c:25 msgid "Out of memory" msgstr "Kein weiterer Speicher vorhanden" #: lib/odbx.c:26 msgid "Incorrect size of allocated memory" msgstr "Reservierter Speicher hat falsche Grösse" #: lib/odbx.c:27 msgid "Loading backend library failed" msgstr "Das Laden der Datenbankbibliothek schlug fehl" #: lib/odbx.c:28 msgid "Operation is not available" msgstr "Funktion ist nicht vorhanden" #: lib/odbx.c:29 msgid "Invalid option" msgstr "Ungültige Option übergeben" #: lib/odbx.c:30 msgid "Option is read only" msgstr "Option ist nicht veränderbar" #: lib/odbx.c:31 msgid "Setting option failed" msgstr "Option konnte nicht gesetzt werden" #: lib/odbx.c:32 msgid "Waiting for result failed" msgstr "Auf das Resultat zu warten schlug fehl" #: lib/odbx.c:33 msgid "Not supported" msgstr "Nicht unterstützt" #: lib/odbx.c:34 backends/oracle/oracle_basic.c:56 msgid "Invalid handle" msgstr "Ungültige Datenbankreferenz übergeben" #: lib/odbxlib.c:148 #, c-format msgid "Loading backend library %s, %s or %s failed" msgstr "Der Datenbanktreiber konnte nicht in %s, %s oder %s gefunden werden" #: lib/odbxlib.c:235 #, fuzzy, c-format msgid "Loading backend library %s, %s or %s failed\n" msgstr "Der Datenbanktreiber konnte nicht in %s, %s oder %s gefunden werden" #: backends/mssql/mssql_basic.c:52 msgid "Connecting to server failed" msgstr "Keine Verbindung zum Server möglich" #: backends/sqlite/sqlite_basic.c:53 backends/sqlite3/sqlite3_basic.c:54 msgid "Opening database failed" msgstr "Das Öffnen der Datenbank schlug fehl" #: backends/sqlite3/sqlite3_basic.c:52 msgid "Unknown error" msgstr "Ein unbekannter Fehler ist aufgetreten" opendbx-1.4.6/po/Rules-quot0000644000175000017500000000337611425153451012535 00000000000000# Special Makefile rules for English message catalogs with quotation marks. DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot .SUFFIXES: .insert-header .po-update-en en@quot.po-create: $(MAKE) en@quot.po-update en@boldquot.po-create: $(MAKE) en@boldquot.po-update en@quot.po-update: en@quot.po-update-en en@boldquot.po-update: en@boldquot.po-update-en .insert-header.po-update-en: @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ ll=`echo $$lang | sed -e 's/@.*//'`; \ LC_ALL=C; export LC_ALL; \ cd $(srcdir); \ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "creation of $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi en@quot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header en@boldquot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header mostlyclean: mostlyclean-quot mostlyclean-quot: rm -f *.insert-header opendbx-1.4.6/po/opendbx.pot0000644000175000017500000000357111765214162012716 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: opendbx 1.4.6\n" "Report-Msgid-Bugs-To: norbert@linuxnetworks.de\n" "POT-Creation-Date: 2012-06-10 23:58+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: lib/odbx.c:21 msgid "Success" msgstr "" #: lib/odbx.c:22 msgid "Backend error occured" msgstr "" #: lib/odbx.c:23 msgid "Invalid capability" msgstr "" #: lib/odbx.c:24 backends/sqlite3/sqlite3_basic.c:53 msgid "Invalid parameter" msgstr "" #: lib/odbx.c:25 msgid "Out of memory" msgstr "" #: lib/odbx.c:26 msgid "Incorrect size of allocated memory" msgstr "" #: lib/odbx.c:27 msgid "Loading backend library failed" msgstr "" #: lib/odbx.c:28 msgid "Operation is not available" msgstr "" #: lib/odbx.c:29 msgid "Invalid option" msgstr "" #: lib/odbx.c:30 msgid "Option is read only" msgstr "" #: lib/odbx.c:31 msgid "Setting option failed" msgstr "" #: lib/odbx.c:32 msgid "Waiting for result failed" msgstr "" #: lib/odbx.c:33 msgid "Not supported" msgstr "" #: lib/odbx.c:34 backends/oracle/oracle_basic.c:56 msgid "Invalid handle" msgstr "" #: lib/odbxlib.c:148 #, c-format msgid "Loading backend library %s, %s or %s failed" msgstr "" #: lib/odbxlib.c:235 #, c-format msgid "Loading backend library %s, %s or %s failed\n" msgstr "" #: backends/mssql/mssql_basic.c:52 msgid "Connecting to server failed" msgstr "" #: backends/sqlite/sqlite_basic.c:53 backends/sqlite3/sqlite3_basic.c:54 msgid "Opening database failed" msgstr "" #: backends/sqlite3/sqlite3_basic.c:52 msgid "Unknown error" msgstr "" opendbx-1.4.6/po/en@boldquot.header0000644000175000017500000000247111425153451014153 00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # # This catalog furthermore displays the text between the quotation marks in # bold face, assuming the VT100/XTerm escape sequences. # opendbx-1.4.6/po/LINGUAS0000644000175000017500000000001311425153451011540 00000000000000en@quot de opendbx-1.4.6/missing0000755000175000017500000002623311425153453011512 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2009-04-28.21; # UTC # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, # 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and \`g' are ignored when checking the name. Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # normalize program name to check for. program=`echo "$1" | sed ' s/^gnu-//; t s/^gnu//; t s/^g//; t'` # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). This is about non-GNU programs, so use $1 not # $program. case $1 in lex*|yacc*) # Not GNU programs, they don't have --version. ;; tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit $? fi ;; makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar*) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: opendbx-1.4.6/test/0000755000175000017500000000000011765214162011146 500000000000000opendbx-1.4.6/test/Makefile.in0000644000175000017500000004471511765211301013136 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @ENABLETEST_TRUE@noinst_PROGRAMS = odbxtest$(EXEEXT) \ @ENABLETEST_TRUE@ odbxplustest$(EXEEXT) subdir = test DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = PROGRAMS = $(noinst_PROGRAMS) am__odbxplustest_SOURCES_DIST = odbxplus-regression.cpp @ENABLETEST_TRUE@am_odbxplustest_OBJECTS = \ @ENABLETEST_TRUE@ odbxplus-regression.$(OBJEXT) odbxplustest_OBJECTS = $(am_odbxplustest_OBJECTS) @ENABLETEST_TRUE@odbxplustest_DEPENDENCIES = \ @ENABLETEST_TRUE@ ../lib/$(LIBPREFIX)opendbx.la \ @ENABLETEST_TRUE@ ../lib/$(LIBPREFIX)opendbxplus.la odbxplustest_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \ $(CXXFLAGS) $(odbxplustest_LDFLAGS) $(LDFLAGS) -o $@ am__odbxtest_SOURCES_DIST = odbx-regression.c odbx-regression.h @ENABLETEST_TRUE@am_odbxtest_OBJECTS = odbx-regression.$(OBJEXT) odbxtest_OBJECTS = $(am_odbxtest_OBJECTS) @ENABLETEST_TRUE@odbxtest_DEPENDENCIES = \ @ENABLETEST_TRUE@ ../lib/$(LIBPREFIX)opendbx.la odbxtest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(odbxtest_LDFLAGS) \ $(LDFLAGS) -o $@ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(odbxplustest_SOURCES) $(odbxtest_SOURCES) DIST_SOURCES = $(am__odbxplustest_SOURCES_DIST) \ $(am__odbxtest_SOURCES_DIST) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ INCLUDES = -I../lib @ENABLETEST_TRUE@odbxtest_SOURCES = odbx-regression.c odbx-regression.h @ENABLETEST_TRUE@odbxtest_LDADD = ../lib/$(LIBPREFIX)opendbx.la @ENABLETEST_TRUE@odbxtest_LDFLAGS = -static @ENABLETEST_TRUE@odbxplustest_SOURCES = odbxplus-regression.cpp @ENABLETEST_TRUE@odbxplustest_LDADD = ../lib/$(LIBPREFIX)opendbx.la ../lib/$(LIBPREFIX)opendbxplus.la @ENABLETEST_TRUE@odbxplustest_LDFLAGS = -static EXTRA_DIST = \ odbxtest.site.template \ odbxtest.sh \ ref/firebird.ref \ ref/mssql.ref \ ref/mysql.ref \ ref/odbc.ref \ ref/oracle.ref \ ref/pgsql.ref \ ref/sqlite.ref \ ref/sqlite3.ref \ ref/sybase.ref all: all-am .SUFFIXES: .SUFFIXES: .c .cpp .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu test/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu test/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstPROGRAMS: @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list odbxplustest$(EXEEXT): $(odbxplustest_OBJECTS) $(odbxplustest_DEPENDENCIES) @rm -f odbxplustest$(EXEEXT) $(odbxplustest_LINK) $(odbxplustest_OBJECTS) $(odbxplustest_LDADD) $(LIBS) odbxtest$(EXEEXT): $(odbxtest_OBJECTS) $(odbxtest_DEPENDENCIES) @rm -f odbxtest$(EXEEXT) $(odbxtest_LINK) $(odbxtest_OBJECTS) $(odbxtest_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/odbx-regression.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/odbxplus-regression.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstPROGRAMS ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/test/odbx-regression.c0000644000175000017500000002750511425153452014352 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include #include #include #include #include #ifdef HAVE_CONFIG_H #include #endif #ifdef HAVE_GETOPT_H #include #endif #include "odbx-regression.h" int exec( odbx_t* handle[], struct odbxstmt qptr[], int verbose ); int lob_read( odbx_t* handle, odbx_result_t* result, int pos ); void help( char* name ) { fprintf( stdout, "Usage: %s \n", name ); fprintf( stdout, " -b Database backend (mysql, pgsql, sqlite, sqlite3, firebird, freetds, sybase)\n" ); fprintf( stdout, " -h Server name, IP address or directory\n" ); fprintf( stdout, " -p Server port\n" ); fprintf( stdout, " -d Database or file name\n" ); fprintf( stdout, " -u User name for authentication\n" ); fprintf( stdout, " -w Password for authentication\n" ); fprintf( stdout, " -e Force encrypted connection\n" ); fprintf( stdout, " -r Number of runs\n" ); fprintf( stdout, " -v Verbose mode\n" ); } int main( int argc, char* argv[] ) { int i, j, k, err = 0; struct odbxstmt** stmts = NULL; struct odbxstmt* queries = NULL; odbx_t* handle[2] = { NULL, NULL }; char *backend, *host, *port, *db, *user, *pass; int param, verbose = 0, encrypt = 0, runs = 1; backend = host = port = db = user = pass = NULL; while( ( param = getopt( argc, argv, "b:h:p:d:u:w:e:r:v" ) ) != -1 ) { switch( param ) { case 'b': backend = optarg; break; case 'h': host = optarg; break; case 'p': port = optarg; break; case 'd': db = optarg; break; case 'u': user = optarg; break; case 'w': pass = optarg; break; case 'v': verbose = 1; break; case 'e': if( optarg != NULL ) { encrypt = (int) strtol( optarg, NULL, 10 ); } break; case 'r': if( optarg != NULL ) { runs = (int) strtol( optarg, NULL, 10 ); } break; default: fprintf( stderr, "Unknown option '%c' with arg '%s'\n", (char) param, optarg ); return 1; } } if( backend == NULL ) { help( argv[0] ); return 1; } if( strstr( backend, "firebird" ) != NULL ) { stmts = firebird_stmt; } if( strstr( backend, "mssql" ) != NULL ) { stmts = mssql_stmt; } if( strstr( backend, "mysql" ) != NULL ) { stmts = mysql_stmt; } if( strstr( backend, "odbc" ) != NULL ) { stmts = odbc_stmt; } if( strstr( backend, "oracle" ) != NULL ) { stmts = oracle_stmt; } if( strstr( backend, "pgsql" ) != NULL ) { stmts = pgsql_stmt; } if( strstr( backend, "sqlite" ) != NULL ) { stmts = sqlite_stmt; } if( strstr( backend, "sqlite3" ) != NULL ) { stmts = sqlite3_stmt; } if( strstr( backend, "sybase" ) != NULL ) { stmts = sybase_stmt; } if( stmts == NULL ) { fprintf( stderr, "Invalid backend: %s\n", backend ); return 1; } queries = stmts[0]; if( verbose ) { fprintf( stdout, "\nParameter:\n" ); if( backend ) { fprintf( stdout, " backend=%s\n", backend ); } if( host ) { fprintf( stdout, " host=%s\n", host ); } if( port ) { fprintf( stdout, " port=%s\n", port ); } if( db ) { fprintf( stdout, " database=%s\n", db ); } if( user ) { fprintf( stdout, " user=%s\n", user ); } if( pass ) { fprintf( stdout, " password=%s\n", pass ); } if( encrypt ) { fprintf( stdout, " encrypt=%d\n", encrypt ); } if( runs ) { fprintf( stdout, " runs=%d\n", runs ); } if( verbose ) { fprintf( stdout, " verbose=%d\n",verbose ); } } for( j = 0; j < runs; j++ ) { if( verbose ) { fprintf( stdout, "\n%d. Run:\n", j+1 ); } for( k = 0; k < 2; k++ ) { if( verbose ) { fprintf( stdout, " odbx_init()\n" ); } if( ( err = odbx_init( &(handle[k]), backend, host, port ) ) < 0 ) { fprintf( stderr, "Error in odbx_init(): %s\n", odbx_error( handle[k], err ) ); return -err; } if( verbose ) { fprintf( stdout, " odbx_capabilities()\n" ); } for( i = 0; i < CAPMAX; i++ ) { if( ( err = odbx_capabilities( handle[k], (unsigned int) cap[i].value ) ) < 0 ) { fprintf( stderr, "Error in odbx_capabilities(): %s\n", odbx_error( handle[k], err ) ); goto ERROR; } cap[i].result = err; fprintf( stdout, " %s: %d\n", cap[i].name, cap[i].result ); } if( verbose ) { fprintf( stdout, " odbx_{get/set}_option()\n" ); } for( i = 0; i < OPTMAX; i++ ) { if( ( err = odbx_get_option( handle[k], opt[i].value, (void*) &(opt[i].result) ) ) < 0 ) { fprintf( stderr, "Error in odbx_get_option(): %s\n", odbx_error( handle[k], err ) ); goto ERROR; } fprintf( stdout, " %s: %d %s\n", opt[i].name, opt[i].result, opt[i].result && opt[i].tryit ? "(using)" : "" ); if( opt[i].result && opt[i].tryit && ( err = odbx_set_option( handle[k], opt[i].value, (void*) &(opt[i].tryit) ) ) < 0 ) { fprintf( stderr, "Error in odbx_set_option(): %s\n", odbx_error( handle[k], err ) ); goto ERROR; } if( opt[i].value == ODBX_OPT_MULTI_STATEMENTS && opt[i].tryit && opt[i].result ) { queries = stmts[1]; } } if( encrypt && ( err = odbx_set_option( handle[k], ODBX_OPT_TLS, (void*) &encrypt ) ) < 0 ) { fprintf( stderr, "Error in odbx_set_option(): %s\n", odbx_error( handle[k], err ) ); goto ERROR; } if( verbose ) { fprintf( stdout, " odbx_bind()\n" ); } if( ( err = odbx_bind( handle[k], db, user, pass, ODBX_BIND_SIMPLE ) ) < 0 ) { fprintf( stderr, "Error in odbx_bind(): %s\n", odbx_error( handle[k], err ) ); goto ERROR; } } for( i = 0; i < runs; i++ ) { static char value[] = "a'\'\\'b"; static char buffer[256]; static char escaped[128]; unsigned long len = 128; int err; if( ( err = odbx_escape( handle[0], value, strlen( value ), escaped, &len ) ) != 0 ) { fprintf( stderr, "Error in odbx_escape(): %s\n", odbx_error( handle[k], err ) ); break; } if( snprintf( buffer, 256, "SELECT * FROM odbxtest WHERE col = '%s' ", escaped ) >= 256 ) { fprintf( stderr, "Error in snprintf(): buffer size too small\n" ); break; } struct odbxstmt malformed_stmt[] = { { 0, buffer }, { -1, NULL } }; if( ( err = exec( handle, malformed_stmt, verbose ) ) < 0 ) { fprintf( stdout, "Error in exec(): Fatal error in malformed run %d\n", i ); break; } if( ( err = exec( handle, queries, verbose ) ) < 0 ) { fprintf( stdout, "Error in exec(): Fatal error in run %d\n", i ); break; } } for( k = 0; k < 2; k++ ) { if( verbose ) { fprintf( stdout, " odbx_unbind()\n" ); } if( ( err = odbx_unbind( handle[k] ) ) < 0 ) { fprintf( stderr, "Error in odbx_unbind(): %s\n", odbx_error( handle[k], err ) ); } } ERROR: for( k = 0; k < 2; k++ ) { if( verbose && handle[k] ) { fprintf( stdout, " odbx_finish()\n" ); } if( handle[k] && ( err = odbx_finish( handle[k] ) ) < 0 ) { fprintf( stderr, "Error in odbx_finish(): %s\n", odbx_error( handle[k], err ) ); } } } return -err; } int exec( odbx_t* handle[], struct odbxstmt* qptr, int verbose ) { char* tmp; int i, cap, err = 0; unsigned long fields; struct timeval tv; odbx_result_t* result; if( ( cap = odbx_capabilities( handle[qptr->num], ODBX_CAP_LO ) ) < 0 ) { fprintf( stderr, "Error in odbx_capabilities(): %s\n", odbx_error( handle[qptr->num], cap ) ); return cap; } while( qptr->str != NULL ) { if( verbose ) { fprintf( stdout, " odbx_query(%d): '%s'\n", qptr->num, qptr->str ); } if( ( err = odbx_query( handle[qptr->num], qptr->str, 0 ) ) < 0 ) { fprintf( stderr, "Error in odbx_query(): %s\n", odbx_error( handle[qptr->num], err ) ); if( odbx_error_type( handle[qptr->num], err ) < 0 ) { return err; } qptr++; continue; } tv.tv_sec = 3; tv.tv_usec = 0; /* use values >1 for paged output (if supported) or 0 for all rows */ while( ( err = odbx_result( handle[qptr->num], &result, &tv, 5 ) ) != ODBX_RES_DONE ) { if( verbose ) { fprintf( stdout, " odbx_result()\n" ); } tv.tv_sec = 3; tv.tv_usec = 0; if( err < 0 ) { fprintf( stderr, "Error in odbx_result(): %s\n", odbx_error( handle[qptr->num], err ) ); if( odbx_error_type( handle[qptr->num], err ) < 0 ) { return err; } continue; } switch( err ) { case ODBX_RES_TIMEOUT: fprintf( stdout, " odbx_result(): Timeout\n" ); continue; case ODBX_RES_NOROWS: fprintf( stdout, " Affected rows: %lld\n", odbx_rows_affected( result ) ); odbx_result_finish( result ); continue; } if( verbose ) { fprintf( stdout, " odbx_column_count()\n" ); } fields = odbx_column_count( result ); while( ( err = odbx_row_fetch( result ) ) != ODBX_ROW_DONE ) { if( verbose ) { fprintf( stdout, " odbx_row_fetch()\n" ); } if( err < 0 ) { fprintf( stderr, "Error in odbx_row_fetch(): %s\n", odbx_error( handle[qptr->num], err ) ); if( odbx_error_type( handle[qptr->num], err ) < 0 ) { return err; } continue; } for( i = 0; i < fields; i++ ) { if( ( err = odbx_column_type( result, i ) ) < 0 ) { fprintf( stderr, "Error in odbx_column_type(): %s\n", odbx_error( handle[qptr->num], err ) ); return err; } fprintf( stdout, " column %d (type %d): ", i, err ); tmp = (char*) odbx_column_name( result, i ); if( tmp != NULL ) { fprintf( stdout, "%s = ", tmp ); } switch( odbx_column_type( result, i ) ) { case ODBX_TYPE_BLOB: case ODBX_TYPE_CLOB: if( cap == ODBX_ENABLE ) { if( ( err = lob_read( handle[qptr->num], result, i ) ) < 0 ) { return err; } break; } default: tmp = (char*) odbx_field_value( result, i ); if( tmp != NULL ) { fprintf( stdout, "'%s'\n", tmp ); } else { fprintf( stdout, "NULL\n" ); } } } } // Test case: Calling odbx_row_fetch() more often must return ODBX_ROW_DONE if( verbose ) { fprintf( stdout, " odbx_row_fetch(n+1)\n" ); } if( ( err = odbx_row_fetch( result ) ) != ODBX_ROW_DONE ) { fprintf( stderr, "Error in odbx_row_fetch(): %s\n", odbx_error( handle[qptr->num], err ) ); if( odbx_error_type( handle[qptr->num], err ) < 0 ) { return err; } } if( verbose ) { fprintf( stdout, " odbx_result_finish()\n" ); } if( ( err = odbx_result_finish( result ) ) != ODBX_ERR_SUCCESS ) { fprintf( stderr, "Error in odbx_result_finish(): %s\n", odbx_error( handle[qptr->num], err ) ); if( odbx_error_type( handle[qptr->num], err ) < 0 ) { return err; } } } // Test case: Calling odbx_result() more often must return ODBX_RES_DONE if( verbose ) { fprintf( stdout, " odbx_result(n+1)\n" ); } if( ( err = odbx_result( handle[qptr->num], &result, NULL, 0 ) ) != ODBX_RES_DONE ) { fprintf( stderr, "Error in odbx_result(): %s\n", odbx_error( handle[qptr->num], err ) ); if( odbx_error_type( handle[qptr->num], err ) < 0 ) { return err; } } qptr++; } return 0; } int lob_read( odbx_t* handle, odbx_result_t* result, int pos ) { int err; char buffer[64]; odbx_lo_t* lo; ssize_t bytes; if( ( err = odbx_lo_open( result, &lo, odbx_field_value( result, pos ) ) ) < 0 ) { fprintf( stderr, "Error in odbx_lo_open(): %s\n", odbx_error( handle, err ) ); return err; } fprintf( stdout, "'" ); while( ( bytes = odbx_lo_read( lo, buffer, sizeof( buffer ) - 1 ) ) != 0 ) { if( bytes < 0 ) { fprintf( stderr, "Error in odbx_lo_read(): %s\n", odbx_error( handle, bytes ) ); odbx_lo_close( lo ); return err; } buffer[bytes] = 0; fprintf( stdout, "%s", buffer ); } fprintf( stdout, "'\n" ); if( ( err = odbx_lo_close( lo ) ) < 0 ) { fprintf( stderr, "Error in odbx_lo_close(): %s\n", odbx_error( handle, err ) ); return err; } return ODBX_ERR_SUCCESS; } opendbx-1.4.6/test/Makefile.am0000644000175000017500000000112211425153452013113 00000000000000INCLUDES = -I../lib if ENABLETEST noinst_PROGRAMS = odbxtest odbxplustest odbxtest_SOURCES = odbx-regression.c odbx-regression.h odbxtest_LDADD = ../lib/$(LIBPREFIX)opendbx.la odbxtest_LDFLAGS = -static odbxplustest_SOURCES = odbxplus-regression.cpp odbxplustest_LDADD = ../lib/$(LIBPREFIX)opendbx.la ../lib/$(LIBPREFIX)opendbxplus.la odbxplustest_LDFLAGS = -static endif EXTRA_DIST = \ odbxtest.site.template \ odbxtest.sh \ ref/firebird.ref \ ref/mssql.ref \ ref/mysql.ref \ ref/odbc.ref \ ref/oracle.ref \ ref/pgsql.ref \ ref/sqlite.ref \ ref/sqlite3.ref \ ref/sybase.ref opendbx-1.4.6/test/odbxtest.site.template0000644000175000017500000000210611425153453015417 00000000000000# # OpenDBX regression test # # This file contains the backends to test and the database # parameter which should be used for each test # # Backends to test #ODBXTEST_BACKENDS="firebird mssql mysql oracle pgsql sqlite sqlite3 sybase" ODBXTEST_BACKENDS="" FIREBIRD_HOST="localhost" FIREBIRD_PORT="3050" FIREBIRD_DATABASE="/var/lib/firebird2/data/odbx.gdb" FIREBIRD_USERNAME="" FIREBIRD_PASSWORD="" MSSQL_HOST="SRV2k3" MSSQL_PORT="" MSSQL_DATABASE="odbx" MSSQL_USERNAME="" MSSQL_PASSWORD="" MYSQL_HOST="localhost" MYSQL_PORT="3306" MYSQL_DATABASE="odbx" MYSQL_USERNAME="" MYSQL_PASSWORD="" ORACLE_HOST="localhost" ORACLE_PORT="1521" ORACLE_DATABASE="odbx" ORACLE_USERNAME="" ORACLE_PASSWORD="" PGSQL_HOST="localhost" PGSQL_PORT="" PGSQL_DATABASE="odbx" PGSQL_USERNAME="" PGSQL_PASSWORD="" SQLITE_HOST="./" SQLITE_PORT="" SQLITE_DATABASE="odbx.sq2" SQLITE_USERNAME="" SQLITE_PASSWORD="" SQLITE3_HOST="./" SQLITE3_PORT="" SQLITE3_DATABASE="odbx.sq3" SQLITE3_USERNAME="" SQLITE3_PASSWORD="" SYBASE_HOST="ASEHOST" SYBASE_PORT="" SYBASE_DATABASE="odbx" SYBASE_USERNAME="" SYBASE_PASSWORD="" opendbx-1.4.6/test/odbx-regression.h0000644000175000017500000006012211425153452014347 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include struct odbxtest { const char* name; int value; int result; int tryit; }; static struct odbxtest cap[] = { { "ODBX_CAP_BASIC", ODBX_CAP_BASIC, 0, 1 }, { "ODBX_CAP_LO", ODBX_CAP_LO, 0, 1 }, }; #define CAPMAX 2 static struct odbxtest opt[] = { { "ODBX_OPT_API_VERSION", ODBX_OPT_API_VERSION, 0, 0 }, { "ODBX_OPT_THREAD_SAFE", ODBX_OPT_THREAD_SAFE, 0, 0 }, { "ODBX_OPT_TLS", ODBX_OPT_TLS, 0, 0 }, { "ODBX_OPT_CONNECT_TIMEOUT", ODBX_OPT_CONNECT_TIMEOUT, 0, 5 }, { "ODBX_OPT_MULTI_STATEMENTS", ODBX_OPT_MULTI_STATEMENTS, 0, 1 }, { "ODBX_OPT_PAGED_RESULTS", ODBX_OPT_PAGED_RESULTS, 0, 1 }, { "ODBX_OPT_COMPRESS", ODBX_OPT_COMPRESS, 0, 1 }, }; #define OPTMAX 7 struct odbxstmt { int num; const char* str; }; static struct odbxstmt firebird_basic[] = { { 0, "SELECT * FROM \"odbxtest\" col = '%s'" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" CHARACTER(1)," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob4g\" BLOB SUB_TYPE TEXT," " \"timeval\" TIME," " \"timestmp\" TIMESTAMP," " \"dateval\" DATE" ")" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob4g\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '0', 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'test clob de', '15:00:00', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob4g\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '1', 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'test clob english', '23:59:59', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob4g\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'test clob french', '15:00:00', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2" }, { 1, "SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 0, "SET TRANSACTION" }, { 0, "UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "ROLLBACK" }, { 1, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 0, "SELECT * FROM \"odbxtest\"" }, { 1, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 1, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* firebird_stmt[] = { firebird_basic, firebird_basic }; static struct odbxstmt mssql_multi[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" CHARACTER(1) NULL," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20) NULL," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob64k\" TEXT," " \"timeval\" DATETIME," " \"timestmp\" DATETIME," " \"dateval\" DATETIME" ")" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '0', 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', '15:00:00', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '1', 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', '23:59:59', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', '15:00:00', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2 SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 1, "BEGIN TRANSACTION UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string' DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string' ROLLBACK" }, { 0, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 1, "SELECT * FROM \"odbxtest\"" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 1, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 0, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* mssql_stmt[] = { mssql_multi, mssql_multi }; static struct odbxstmt mysql_basic[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" BOOLEAN," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob64k\" TEXT," " \"timeval\" TIME," " \"timestmp\" DATETIME," " \"dateval\" DATE" ") ENGINE=InnoDB" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( 0, 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', '15:00:00', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( 1, 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', '23:59:59', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', '15:00:00', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2" }, { 1, "SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 0, "START TRANSACTION" }, { 0, "UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "ROLLBACK" }, { 1, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 0, "SELECT * FROM \"odbxtest\"" }, { 1, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 1, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt mysql_multi[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" BOOLEAN," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob64k\" TEXT," " \"timeval\" TIME," " \"timestmp\" DATETIME," " \"dateval\" DATE" ") ENGINE=InnoDB" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( 0, 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', '15:00:00', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( 1, 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', '23:59:59', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', '15:00:00', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2; SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 1, "START TRANSACTION; UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'; DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'; ROLLBACK" }, { 0, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 1, "SELECT * FROM \"odbxtest\"" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 1, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 0, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* mysql_stmt[] = { mysql_basic, mysql_multi }; static struct odbxstmt odbc_basic[] = { { 0, "SELECT * FROM odbxtest" }, { 0, "CREATE TABLE odbxtest (" " i1 CHARACTER(1) NULL," " i16 SMALLINT," " i32 INTEGER," " d9 DECIMAL(9,3)," " f4 REAL," " f3 FLOAT(15)," " f8 DOUBLE PRECISION," " c2 CHARACTER(2)," " nc12 NATIONAL CHARACTER(12)," " str20 CHARACTER VARYING(20)," " nstr24 NATIONAL CHARACTER VARYING(24)" ")" }, { 0, "INSERT INTO odbxtest ( i1, i16, i32, d9, f4, f3, f8, c2, nc12, str20, nstr24 ) VALUES ( '0', 1000, 100000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü' )" }, { 0, "INSERT INTO odbxtest ( i1, i16, i32, d9, f4, f3, f8, c2, nc12, str20, nstr24 ) VALUES ( '1', 2, 4, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou' )" }, { 0, "INSERT INTO odbxtest ( i1, i16, i32, d9, f4, f3, f8, c2, nc12, str20, nstr24 ) VALUES ( NULL, 2, 4, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè' )" }, { 0, "SELECT * FROM odbxtest WHERE i16 = 2" }, { 0, "SELECT * FROM odbxtest WHERE str20 = 'empty'" }, { 0, "BEGIN TRANSACTION" }, { 0, "UPDATE odbxtest SET i16 = 3 WHERE str20 LIKE '%string'" }, { 0, "DELETE FROM odbxtest WHERE str20 LIKE '%string'" }, { 0, "ROLLBACK" }, { 0, "UPDATE odbxtest SET c2 = '' WHERE c2 = 'AA'" }, { 0, "SELECT * FROM odbxtest" }, { 0, "DELETE FROM odbxtest WHERE str20 LIKE '%string'" }, { 0, "SELECT COUNT(*) AS count FROM odbxtest" }, { 0, "DROP TABLE odbxtest" }, { -1, NULL } }; static struct odbxstmt* odbc_stmt[] = { odbc_basic, odbc_basic }; static struct odbxstmt oracle_basic[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" CHAR(1)," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" NUMBER(20,0)," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" CHARACTER VARYING(24)," " \"clob4g\" CLOB," " \"timestmp\" TIMESTAMP," " \"dateval\" DATE" ")" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob4g\", \"timestmp\", \"dateval\" ) VALUES ( '0', 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob4g\", \"timestmp\", \"dateval\" ) VALUES ( '1', 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob4g\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2 ORDER BY \"i1\"" }, { 1, "SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty' ORDER BY \"i1\"" }, { 0, "SET TRANSACTION ISOLATION LEVEL READ COMMITTED" }, { 0, "UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "ROLLBACK" }, { 1, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 0, "SELECT * FROM \"odbxtest\" ORDER BY \"i1\"" }, { 1, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 1, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* oracle_stmt[] = { oracle_basic, NULL }; static struct odbxstmt pgsql_multi[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" BOOLEAN," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob1g\" TEXT," " \"timeval\" TIME," " \"timestmp\" TIMESTAMP," " \"dateval\" DATE" ")" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob1g\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '0', 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', '15:00:00', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob1g\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '1', 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', '23:59:59', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob1g\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', '15:00:00', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2; SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 1, "START TRANSACTION; UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'; DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'; ROLLBACK" }, { 0, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 1, "SELECT * FROM \"odbxtest\"" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 1, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 0, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* pgsql_stmt[] = { pgsql_multi, pgsql_multi }; static struct odbxstmt sqlite_multi[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" BOOLEAN," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob64k\" CLOB," " \"nclob64k\" CLOB," " \"timeval\" TIME," " \"timevaltz\" TIME WITH TIME ZONE," " \"timestmp\" TIMESTAMP," " \"timestmptz\" TIMESTAMP WITH TIME ZONE," " \"dateval\" DATE" ")" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"nclob64k\", \"timeval\", \"timevaltz\", \"timestmp\", \"timestmptz\", \"dateval\" ) VALUES ( 0, 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', 'äöü very long national text äöü', '15:00:00', '15:00:00-01', '2000-01-01 00:00:01', '2000-01-01 00:00:01-01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"nclob64k\", \"timeval\", \"timevaltz\", \"timestmp\", \"timestmptz\", \"dateval\" ) VALUES ( 1, 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', 'national character clob', '23:59:59', '23:59:59+06', '1999-01-01 00:00:00', '1999-01-01 00:00:00+06', '1999-01-01' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"nclob64k\", \"timeval\", \"timevaltz\", \"timestmp\", \"timestmptz\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', 'éçè very long national text éçè', '15:00:00', '15:00:00+00', '2005-12-31 23:59:59', '2005-12-31 23:59:59+00', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2; SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 0, "BEGIN TRANSACTION; UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'; DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'; ROLLBACK" }, { 0, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 0, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 0, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* sqlite_stmt[] = { sqlite_multi, sqlite_multi }; static struct odbxstmt sqlite3_multi[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" BOOLEAN," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20)," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob64k\" CLOB," " \"nclob64k\" CLOB," " \"timeval\" TIME," " \"timevaltz\" TIME WITH TIME ZONE," " \"timestmp\" TIMESTAMP," " \"timestmptz\" TIMESTAMP WITH TIME ZONE," " \"dateval\" DATE" ")" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"nclob64k\", \"timeval\", \"timevaltz\", \"timestmp\", \"timestmptz\", \"dateval\" ) VALUES ( 0, 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', 'äöü very long national text äöü', '15:00:00', '15:00:00-01', '2000-01-01 00:00:01', '2000-01-01 00:00:01-01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"nclob64k\", \"timeval\", \"timevaltz\", \"timestmp\", \"timestmptz\", \"dateval\" ) VALUES ( 1, 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', 'national character clob', '23:59:59+06', '23:59:59', '1999-01-01 00:00:00', '1999-01-01 00:00:00+06', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"nclob64k\", \"timeval\", \"timevaltz\", \"timestmp\", \"timestmptz\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', 'éçè very long national text éçè', '15:00:00', '15:00:00+00', '2005-12-31 23:59:59', '2005-12-31 23:59:59+00', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2; SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 1, "BEGIN TRANSACTION; UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string'; DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'; ROLLBACK" }, { 0, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 1, "SELECT * FROM \"odbxtest\"" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 1, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 0, "DROP TABLE \"odbxtest\"" }, // Can't create table immediately again after dropping it via second connection { -1, NULL } }; static struct odbxstmt* sqlite3_stmt[] = { sqlite3_multi, sqlite3_multi }; static struct odbxstmt sybase_multi[] = { { 0, "SELECT * FROM \"odbxtest\"" }, { 0, "CREATE TABLE \"odbxtest\" (" " \"i1\" CHARACTER VARYING(1) NULL," " \"i16\" SMALLINT," " \"i32\" INTEGER," " \"i64\" BIGINT," " \"d9\" DECIMAL(9,3)," " \"f4\" REAL," " \"f3\" FLOAT(15)," " \"f8\" DOUBLE PRECISION," " \"c2\" CHARACTER(2)," " \"nc12\" NATIONAL CHARACTER(12)," " \"str20\" CHARACTER VARYING(20) NULL," " \"nstr24\" NATIONAL CHARACTER VARYING(24)," " \"clob64k\" TEXT," " \"timeval\" TIME," " \"timestmp\" DATETIME," " \"dateval\" DATE" ")" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '0', 1000, 100000, 10000000, 12345.123, 10000.1, 100.1, 10000000.1, 'DE', 'äöüäöü', 'first string', 'äöüäöüäöüäöü', 'a very long text', '15:00:00', '2000-01-01 00:00:01', '2000-02-29' )" }, { 0, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( '1', 2, 4, 8, 1.333, 4.5, 3.99, 8.0, 'EN', 'aouaou', 'varstring', 'aouaouaouaou', 'clob', '23:59:59', '1999-01-01 00:00:00', '1999-01-01' )" }, { 1, "INSERT INTO \"odbxtest\" ( \"i1\", \"i16\", \"i32\", \"i64\", \"d9\", \"f4\", \"f3\", \"f8\", \"c2\", \"nc12\", \"str20\", \"nstr24\", \"clob64k\", \"timeval\", \"timestmp\", \"dateval\" ) VALUES ( NULL, 2, 4, 8, 2.5, 4.0, 3.1, 8.5, 'FR', 'éçèéçè', NULL, 'éçèéçèéçèéçè', 'text', '15:00:00', '2005-12-31 23:59:59', '2005-12-01' )" }, { 0, "SELECT * FROM \"odbxtest\" WHERE \"i16\" = 2 SELECT * FROM \"odbxtest\" WHERE \"str20\" = 'empty'" }, { 1, "BEGIN TRANSACTION UPDATE \"odbxtest\" SET \"i16\" = 3 WHERE \"str20\" LIKE '%string' DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string' ROLLBACK" }, { 0, "UPDATE \"odbxtest\" SET \"c2\" = '' WHERE \"c2\" = 'AA'" }, { 1, "SELECT * FROM \"odbxtest\"" }, { 0, "DELETE FROM \"odbxtest\" WHERE \"str20\" LIKE '%string'" }, { 1, "SELECT COUNT(*) AS \"count\" FROM \"odbxtest\"" }, { 0, "DROP TABLE \"odbxtest\"" }, { -1, NULL } }; static struct odbxstmt* sybase_stmt[] = { sybase_multi, sybase_multi }; opendbx-1.4.6/test/ref/0000755000175000017500000000000011765214162011722 500000000000000opendbx-1.4.6/test/ref/sqlite3.ref0000644000175000017500000001150011751465002013715 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 3): i1 = '1' column 1 (type 3): i16 = '2' column 2 (type 3): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 9): d9 = '1.333' column 5 (type 9): f4 = '4.5' column 6 (type 9): f3 = '3.99' column 7 (type 9): f8 = '8.0' column 8 (type 32): c2 = 'EN' column 9 (type 32): nc12 = 'aouaou' column 10 (type 32): str20 = 'varstring' column 11 (type 32): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 32): nclob64k = 'national character clob' column 14 (type 32): timeval = '23:59:59+06' column 15 (type 32): timevaltz = '23:59:59' column 16 (type 32): timestmp = '1999-01-01 00:00:00' column 17 (type 32): timestmptz = '1999-01-01 00:00:00+06' column 18 (type 32): dateval = '1999-01-01' column 0 (type 3): i1 = NULL column 1 (type 3): i16 = '2' column 2 (type 3): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 9): d9 = '2.5' column 5 (type 9): f4 = '4.0' column 6 (type 9): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 32): c2 = 'FR' column 9 (type 32): nc12 = 'éçèéçè' column 10 (type 32): str20 = NULL column 11 (type 32): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 32): nclob64k = 'éçè very long national text éçè' column 14 (type 32): timeval = '15:00:00' column 15 (type 32): timevaltz = '15:00:00+00' column 16 (type 32): timestmp = '2005-12-31 23:59:59' column 17 (type 32): timestmptz = '2005-12-31 23:59:59+00' column 18 (type 32): dateval = '2005-12-01' Affected rows: 1 Affected rows: 2 Affected rows: 2 Affected rows: 2 Affected rows: 0 column 0 (type 3): i1 = '0' column 1 (type 3): i16 = '1000' column 2 (type 3): i32 = '100000' column 3 (type 3): i64 = '10000000' column 4 (type 9): d9 = '12345.123' column 5 (type 9): f4 = '10000.1' column 6 (type 9): f3 = '100.1' column 7 (type 9): f8 = '10000000.1' column 8 (type 32): c2 = 'DE' column 9 (type 32): nc12 = 'äöüäöü' column 10 (type 32): str20 = 'first string' column 11 (type 32): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob64k = 'a very long text' column 13 (type 32): nclob64k = 'äöü very long national text äöü' column 14 (type 32): timeval = '15:00:00' column 15 (type 32): timevaltz = '15:00:00-01' column 16 (type 32): timestmp = '2000-01-01 00:00:01' column 17 (type 32): timestmptz = '2000-01-01 00:00:01-01' column 18 (type 32): dateval = '2000-02-29' column 0 (type 3): i1 = '1' column 1 (type 3): i16 = '2' column 2 (type 3): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 9): d9 = '1.333' column 5 (type 9): f4 = '4.5' column 6 (type 9): f3 = '3.99' column 7 (type 9): f8 = '8.0' column 8 (type 32): c2 = 'EN' column 9 (type 32): nc12 = 'aouaou' column 10 (type 32): str20 = 'varstring' column 11 (type 32): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 32): nclob64k = 'national character clob' column 14 (type 32): timeval = '23:59:59+06' column 15 (type 32): timevaltz = '23:59:59' column 16 (type 32): timestmp = '1999-01-01 00:00:00' column 17 (type 32): timestmptz = '1999-01-01 00:00:00+06' column 18 (type 32): dateval = '1999-01-01' column 0 (type 3): i1 = NULL column 1 (type 3): i16 = '2' column 2 (type 3): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 9): d9 = '2.5' column 5 (type 9): f4 = '4.0' column 6 (type 9): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 32): c2 = 'FR' column 9 (type 32): nc12 = 'éçèéçè' column 10 (type 32): str20 = NULL column 11 (type 32): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 32): nclob64k = 'éçè very long national text éçè' column 14 (type 32): timeval = '15:00:00' column 15 (type 32): timevaltz = '15:00:00+00' column 16 (type 32): timestmp = '2005-12-31 23:59:59' column 17 (type 32): timestmptz = '2005-12-31 23:59:59+00' column 18 (type 32): dateval = '2005-12-01' Affected rows: 2 column 0 (type 3): count = '1' Affected rows: 2 opendbx-1.4.6/test/ref/sybase.ref0000644000175000017500000001013011425153453013617 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10100 ODBX_OPT_THREAD_SAFE: 0 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10100 ODBX_OPT_THREAD_SAFE: 0 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.500000' column 6 (type 8): f3 = '3.990000' column 7 (type 9): f8 = '8.000000' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 16): str20 = 'varstring' column 11 (type 16): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 50): timeval = '1900-01-01 23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 50): dateval = '1999-01-01 00:00:00' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4.000000' column 6 (type 8): f3 = '3.100000' column 7 (type 9): f8 = '8.500000' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 16): str20 = NULL column 11 (type 16): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 50): timeval = '1900-01-01 15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 50): dateval = '2005-12-01 00:00:00' Affected rows: 0 Affected rows: 2 Affected rows: 0 column 0 (type 16): i1 = '0' column 1 (type 1): i16 = '1000' column 2 (type 2): i32 = '100000' column 3 (type 7): i64 = '10000000' column 4 (type 7): d9 = '12345.123' column 5 (type 8): f4 = '10000.099609' column 6 (type 8): f3 = '100.099998' column 7 (type 9): f8 = '10000000.100000' column 8 (type 16): c2 = 'DE' column 9 (type 16): nc12 = 'äöüäöü' column 10 (type 16): str20 = 'first string' column 11 (type 16): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob64k = 'a very long text' column 13 (type 50): timeval = '1900-01-01 15:00:00' column 14 (type 50): timestmp = '2000-01-01 00:00:01' column 15 (type 50): dateval = '2000-02-29 00:00:00' column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.500000' column 6 (type 8): f3 = '3.990000' column 7 (type 9): f8 = '8.000000' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 16): str20 = 'varstring' column 11 (type 16): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 50): timeval = '1900-01-01 23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 50): dateval = '1999-01-01 00:00:00' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4.000000' column 6 (type 8): f3 = '3.100000' column 7 (type 9): f8 = '8.500000' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 16): str20 = NULL column 11 (type 16): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 50): timeval = '1900-01-01 15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 50): dateval = '2005-12-01 00:00:00' Affected rows: 2 column 0 (type 2): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/mssql.ref0000644000175000017500000000775611425153453013514 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 9): i64 = '8' column 4 (type 9): d9 = '1.333' column 5 (type 8): f4 = '4.5' column 6 (type 8): f3 = '3.99' column 7 (type 9): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 16): str20 = 'varstring' column 11 (type 16): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 50): timeval = '1900-01-01 23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 50): dateval = '1999-01-01 00:00:00' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 9): i64 = '8' column 4 (type 9): d9 = '2.5' column 5 (type 8): f4 = '4' column 6 (type 8): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 16): str20 = NULL column 11 (type 16): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 50): timeval = '1900-01-01 15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 50): dateval = '2005-12-01 00:00:00' Affected rows: 0 Affected rows: 0 column 0 (type 16): i1 = '0' column 1 (type 1): i16 = '1000' column 2 (type 2): i32 = '100000' column 3 (type 9): i64 = '10000000' column 4 (type 9): d9 = '12345.123' column 5 (type 8): f4 = '10000.1' column 6 (type 8): f3 = '100.1' column 7 (type 9): f8 = '10000000.1' column 8 (type 16): c2 = 'DE' column 9 (type 16): nc12 = 'äöüäöü' column 10 (type 16): str20 = 'first string' column 11 (type 16): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob64k = 'a very long text' column 13 (type 50): timeval = '1900-01-01 15:00:00' column 14 (type 50): timestmp = '2000-01-01 00:00:01' column 15 (type 50): dateval = '2000-02-29 00:00:00' column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 9): i64 = '8' column 4 (type 9): d9 = '1.333' column 5 (type 8): f4 = '4.5' column 6 (type 8): f3 = '3.99' column 7 (type 9): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 16): str20 = 'varstring' column 11 (type 16): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 50): timeval = '1900-01-01 23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 50): dateval = '1999-01-01 00:00:00' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 9): i64 = '8' column 4 (type 9): d9 = '2.5' column 5 (type 8): f4 = '4' column 6 (type 8): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 16): str20 = NULL column 11 (type 16): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 50): timeval = '1900-01-01 15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 50): dateval = '2005-12-01 00:00:00' Affected rows: 2 column 0 (type 2): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/oracle.ref0000644000175000017500000000734211425153453013611 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 1 (using) ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 1 (using) ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 16): i1 = '1' column 1 (type 7): i16 = '2' column 2 (type 7): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 7): f4 = '4.5' column 6 (type 7): f3 = '3.99' column 7 (type 7): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob4g = 'clob' column 13 (type 50): timestmp = '1999-01-01 00:00:00' column 14 (type 52): dateval = '1999-01-01' column 0 (type 16): i1 = NULL column 1 (type 7): i16 = '2' column 2 (type 7): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '2.5' column 5 (type 7): f4 = '4' column 6 (type 7): f3 = '3.1' column 7 (type 7): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè ' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob4g = 'text' column 13 (type 50): timestmp = '2005-12-31 23:59:59' column 14 (type 52): dateval = '2005-12-01' Affected rows: 0 Affected rows: 2 Affected rows: 2 Affected rows: 0 Affected rows: 0 column 0 (type 16): i1 = '0' column 1 (type 7): i16 = '1000' column 2 (type 7): i32 = '100000' column 3 (type 7): i64 = '10000000' column 4 (type 7): d9 = '12345.123' column 5 (type 7): f4 = '10000.1' column 6 (type 7): f3 = '100.1' column 7 (type 7): f8 = '10000000.1' column 8 (type 16): c2 = 'DE' column 9 (type 16): nc12 = 'äöüäöü ' column 10 (type 18): str20 = 'first string' column 11 (type 18): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob4g = 'a very long text' column 13 (type 50): timestmp = '2000-01-01 00:00:01' column 14 (type 52): dateval = '2000-02-29' column 0 (type 16): i1 = '1' column 1 (type 7): i16 = '2' column 2 (type 7): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 7): f4 = '4.5' column 6 (type 7): f3 = '3.99' column 7 (type 7): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob4g = 'clob' column 13 (type 50): timestmp = '1999-01-01 00:00:00' column 14 (type 52): dateval = '1999-01-01' column 0 (type 16): i1 = NULL column 1 (type 7): i16 = '2' column 2 (type 7): i32 = '4' column 3 (type 7): i64 = '8' column 4 (type 7): d9 = '2.5' column 5 (type 7): f4 = '4' column 6 (type 7): f3 = '3.1' column 7 (type 7): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè ' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob4g = 'text' column 13 (type 50): timestmp = '2005-12-31 23:59:59' column 14 (type 52): dateval = '2005-12-01' Affected rows: 2 column 0 (type 7): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/pgsql.ref0000644000175000017500000000770311425153453013473 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 1 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 1 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 0): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.5' column 6 (type 8): f3 = '3.99' column 7 (type 9): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob1g = 'clob' column 13 (type 48): timeval = '23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 52): dateval = '1999-01-01' column 0 (type 0): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4' column 6 (type 8): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob1g = 'text' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 52): dateval = '2005-12-01' Affected rows: 0 Affected rows: 2 Affected rows: 2 Affected rows: 0 Affected rows: 0 column 0 (type 0): i1 = '0' column 1 (type 1): i16 = '1000' column 2 (type 2): i32 = '100000' column 3 (type 3): i64 = '10000000' column 4 (type 7): d9 = '12345.123' column 5 (type 8): f4 = '10000.1' column 6 (type 8): f3 = '100.1' column 7 (type 9): f8 = '10000000.1' column 8 (type 16): c2 = 'DE' column 9 (type 16): nc12 = 'äöüäöü' column 10 (type 18): str20 = 'first string' column 11 (type 18): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob1g = 'a very long text' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2000-01-01 00:00:01' column 15 (type 52): dateval = '2000-02-29' column 0 (type 0): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.5' column 6 (type 8): f3 = '3.99' column 7 (type 9): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob1g = 'clob' column 13 (type 48): timeval = '23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 52): dateval = '1999-01-01' column 0 (type 0): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4' column 6 (type 8): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob1g = 'text' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 52): dateval = '2005-12-01' Affected rows: 2 column 0 (type 3): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/firebird.ref0000644000175000017500000001005311425153453014123 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 1 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 1 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.500000' column 6 (type 9): f3 = '3.990000' column 7 (type 9): f8 = '8.000000' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob4g = 'test clob english' column 13 (type 48): timeval = '23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 52): dateval = '1999-01-01' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4.000000' column 6 (type 9): f3 = '3.100000' column 7 (type 9): f8 = '8.500000' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob4g = 'test clob french' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 52): dateval = '2005-12-01' Affected rows: 0 Affected rows: 2 Affected rows: 2 Affected rows: 0 Affected rows: 0 column 0 (type 16): i1 = '0' column 1 (type 1): i16 = '1000' column 2 (type 2): i32 = '100000' column 3 (type 3): i64 = '10000000' column 4 (type 7): d9 = '12345.123' column 5 (type 8): f4 = '10000.099609' column 6 (type 9): f3 = '100.100000' column 7 (type 9): f8 = '10000000.100000' column 8 (type 16): c2 = 'DE' column 9 (type 16): nc12 = 'äöüäöü' column 10 (type 18): str20 = 'first string' column 11 (type 18): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob4g = 'test clob de' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2000-01-01 00:00:01' column 15 (type 52): dateval = '2000-02-29' column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.500000' column 6 (type 9): f3 = '3.990000' column 7 (type 9): f8 = '8.000000' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou ' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob4g = 'test clob english' column 13 (type 48): timeval = '23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 52): dateval = '1999-01-01' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4.000000' column 6 (type 9): f3 = '3.100000' column 7 (type 9): f8 = '8.500000' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob4g = 'test clob french' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 52): dateval = '2005-12-01' Affected rows: 2 column 0 (type 2): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/mysql.ref0000644000175000017500000000774211425153453013515 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 1 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 1 (using) ODBX_OPT_COMPRESS: 1 (using) ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 1 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 1 (using) ODBX_OPT_PAGED_RESULTS: 1 (using) ODBX_OPT_COMPRESS: 1 (using) Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 255): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.5' column 6 (type 8): f3 = '3.99' column 7 (type 9): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 48): timeval = '23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 52): dateval = '1999-01-01' column 0 (type 255): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4' column 6 (type 8): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 52): dateval = '2005-12-01' Affected rows: 0 Affected rows: 2 Affected rows: 2 Affected rows: 0 Affected rows: 0 column 0 (type 255): i1 = '0' column 1 (type 1): i16 = '1000' column 2 (type 2): i32 = '100000' column 3 (type 3): i64 = '10000000' column 4 (type 7): d9 = '12345.123' column 5 (type 8): f4 = '10000.1' column 6 (type 8): f3 = '100.1' column 7 (type 9): f8 = '10000000.1' column 8 (type 16): c2 = 'DE' column 9 (type 16): nc12 = 'äöüäöü' column 10 (type 18): str20 = 'first string' column 11 (type 18): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob64k = 'a very long text' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2000-01-01 00:00:01' column 15 (type 52): dateval = '2000-02-29' column 0 (type 255): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '1.333' column 5 (type 8): f4 = '4.5' column 6 (type 8): f3 = '3.99' column 7 (type 9): f8 = '8' column 8 (type 16): c2 = 'EN' column 9 (type 16): nc12 = 'aouaou' column 10 (type 18): str20 = 'varstring' column 11 (type 18): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 48): timeval = '23:59:59' column 14 (type 50): timestmp = '1999-01-01 00:00:00' column 15 (type 52): dateval = '1999-01-01' column 0 (type 255): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 3): i64 = '8' column 4 (type 7): d9 = '2.500' column 5 (type 8): f4 = '4' column 6 (type 8): f3 = '3.1' column 7 (type 9): f8 = '8.5' column 8 (type 16): c2 = 'FR' column 9 (type 16): nc12 = 'éçèéçè' column 10 (type 18): str20 = NULL column 11 (type 18): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 48): timeval = '15:00:00' column 14 (type 50): timestmp = '2005-12-31 23:59:59' column 15 (type 52): dateval = '2005-12-01' Affected rows: 2 column 0 (type 3): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/odbc.ref0000644000175000017500000000543711425153453013256 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 1 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 1 (using) ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): d9 = '1.333' column 4 (type 8): f4 = '4.5' column 5 (type 8): f3 = '3.99' column 6 (type 15): f8 = '8' column 7 (type 16): c2 = 'EN' column 8 (type 16): nc12 = 'aouaou ' column 9 (type 18): str20 = 'varstring' column 10 (type 18): nstr24 = 'aouaouaouaou' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): d9 = '2.500' column 4 (type 8): f4 = '4' column 5 (type 8): f3 = '3.0999999' column 6 (type 15): f8 = '8.5' column 7 (type 16): c2 = 'FR' column 8 (type 16): nc12 = 'éçèéçè' column 9 (type 18): str20 = NULL column 10 (type 18): nstr24 = 'éçèéçèéçèéçè' Affected rows: 2 Affected rows: 2 Affected rows: 0 column 0 (type 16): i1 = '0' column 1 (type 1): i16 = '1000' column 2 (type 2): i32 = '100000' column 3 (type 7): d9 = '12345.123' column 4 (type 8): f4 = '10000.1' column 5 (type 8): f3 = '100.1' column 6 (type 15): f8 = '10000000.1' column 7 (type 16): c2 = 'DE' column 8 (type 16): nc12 = 'äöüäöü' column 9 (type 18): str20 = 'first string' column 10 (type 18): nstr24 = 'äöüäöüäöüäöü' column 0 (type 16): i1 = '1' column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): d9 = '1.333' column 4 (type 8): f4 = '4.5' column 5 (type 8): f3 = '3.99' column 6 (type 15): f8 = '8' column 7 (type 16): c2 = 'EN' column 8 (type 16): nc12 = 'aouaou ' column 9 (type 18): str20 = 'varstring' column 10 (type 18): nstr24 = 'aouaouaouaou' column 0 (type 16): i1 = NULL column 1 (type 1): i16 = '2' column 2 (type 2): i32 = '4' column 3 (type 7): d9 = '2.500' column 4 (type 8): f4 = '4' column 5 (type 8): f3 = '3.0999999' column 6 (type 15): f8 = '8.5' column 7 (type 16): c2 = 'FR' column 8 (type 16): nc12 = 'éçèéçè' column 9 (type 18): str20 = NULL column 10 (type 18): nstr24 = 'éçèéçèéçèéçè' Affected rows: 2 column 0 (type 3): count = '1' Affected rows: 0 opendbx-1.4.6/test/ref/sqlite.ref0000644000175000017500000001145011425153453013640 00000000000000 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 0 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 ODBX_CAP_BASIC: 1 ODBX_CAP_LO: 0 ODBX_OPT_API_VERSION: 10200 ODBX_OPT_THREAD_SAFE: 0 ODBX_OPT_TLS: 0 ODBX_OPT_CONNECT_TIMEOUT: 0 ODBX_OPT_MULTI_STATEMENTS: 0 ODBX_OPT_PAGED_RESULTS: 0 ODBX_OPT_COMPRESS: 0 Affected rows: 0 Affected rows: 1 Affected rows: 1 Affected rows: 1 column 0 (type 32): i1 = '1' column 1 (type 32): i16 = '2' column 2 (type 32): i32 = '4' column 3 (type 32): i64 = '8' column 4 (type 32): d9 = '1.333' column 5 (type 32): f4 = '4.5' column 6 (type 32): f3 = '3.99' column 7 (type 32): f8 = '8.0' column 8 (type 32): c2 = 'EN' column 9 (type 32): nc12 = 'aouaou' column 10 (type 32): str20 = 'varstring' column 11 (type 32): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 32): nclob64k = 'national character clob' column 14 (type 32): timeval = '23:59:59' column 15 (type 32): timevaltz = '23:59:59+06' column 16 (type 32): timestmp = '1999-01-01 00:00:00' column 17 (type 32): timestmptz = '1999-01-01 00:00:00+06' column 18 (type 32): dateval = '1999-01-01' column 0 (type 32): i1 = NULL column 1 (type 32): i16 = '2' column 2 (type 32): i32 = '4' column 3 (type 32): i64 = '8' column 4 (type 32): d9 = '2.5' column 5 (type 32): f4 = '4.0' column 6 (type 32): f3 = '3.1' column 7 (type 32): f8 = '8.5' column 8 (type 32): c2 = 'FR' column 9 (type 32): nc12 = 'éçèéçè' column 10 (type 32): str20 = NULL column 11 (type 32): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 32): nclob64k = 'éçè very long national text éçè' column 14 (type 32): timeval = '15:00:00' column 15 (type 32): timevaltz = '15:00:00+00' column 16 (type 32): timestmp = '2005-12-31 23:59:59' column 17 (type 32): timestmptz = '2005-12-31 23:59:59+00' column 18 (type 32): dateval = '2005-12-01' Affected rows: 4 Affected rows: 0 column 0 (type 32): i1 = '0' column 1 (type 32): i16 = '1000' column 2 (type 32): i32 = '100000' column 3 (type 32): i64 = '10000000' column 4 (type 32): d9 = '12345.123' column 5 (type 32): f4 = '10000.1' column 6 (type 32): f3 = '100.1' column 7 (type 32): f8 = '10000000.1' column 8 (type 32): c2 = 'DE' column 9 (type 32): nc12 = 'äöüäöü' column 10 (type 32): str20 = 'first string' column 11 (type 32): nstr24 = 'äöüäöüäöüäöü' column 12 (type 32): clob64k = 'a very long text' column 13 (type 32): nclob64k = 'äöü very long national text äöü' column 14 (type 32): timeval = '15:00:00' column 15 (type 32): timevaltz = '15:00:00-01' column 16 (type 32): timestmp = '2000-01-01 00:00:01' column 17 (type 32): timestmptz = '2000-01-01 00:00:01-01' column 18 (type 32): dateval = '2000-02-29' column 0 (type 32): i1 = '1' column 1 (type 32): i16 = '2' column 2 (type 32): i32 = '4' column 3 (type 32): i64 = '8' column 4 (type 32): d9 = '1.333' column 5 (type 32): f4 = '4.5' column 6 (type 32): f3 = '3.99' column 7 (type 32): f8 = '8.0' column 8 (type 32): c2 = 'EN' column 9 (type 32): nc12 = 'aouaou' column 10 (type 32): str20 = 'varstring' column 11 (type 32): nstr24 = 'aouaouaouaou' column 12 (type 32): clob64k = 'clob' column 13 (type 32): nclob64k = 'national character clob' column 14 (type 32): timeval = '23:59:59' column 15 (type 32): timevaltz = '23:59:59+06' column 16 (type 32): timestmp = '1999-01-01 00:00:00' column 17 (type 32): timestmptz = '1999-01-01 00:00:00+06' column 18 (type 32): dateval = '1999-01-01' column 0 (type 32): i1 = NULL column 1 (type 32): i16 = '2' column 2 (type 32): i32 = '4' column 3 (type 32): i64 = '8' column 4 (type 32): d9 = '2.5' column 5 (type 32): f4 = '4.0' column 6 (type 32): f3 = '3.1' column 7 (type 32): f8 = '8.5' column 8 (type 32): c2 = 'FR' column 9 (type 32): nc12 = 'éçèéçè' column 10 (type 32): str20 = NULL column 11 (type 32): nstr24 = 'éçèéçèéçèéçè' column 12 (type 32): clob64k = 'text' column 13 (type 32): nclob64k = 'éçè very long national text éçè' column 14 (type 32): timeval = '15:00:00' column 15 (type 32): timevaltz = '15:00:00+00' column 16 (type 32): timestmp = '2005-12-31 23:59:59' column 17 (type 32): timestmptz = '2005-12-31 23:59:59+00' column 18 (type 32): dateval = '2005-12-01' Affected rows: 2 column 0 (type 32): count = '1' Affected rows: 0 opendbx-1.4.6/test/odbxplus-regression.cpp0000644000175000017500000002113111751447333015611 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include #include #include #include #include #ifdef HAVE_CONFIG_H #include #endif #ifdef HAVE_GETOPT_H #include #endif #include "odbx-regression.h" using std::cout; using std::cerr; using std::endl; using std::string; using std::vector; using OpenDBX::Conn; using OpenDBX::Stmt; using OpenDBX::Result; using OpenDBX::Lob; void exec( vector& conn, struct odbxstmt* qptr, int verbose ); void lob_read( Result& result, int pos ); void help( char* name ) { cout << "Usage: " << name << " " << endl; cout << " -b Database backend (mysql, pgsql, sqlite, sqlite3, firebird, freetds, sybase)" << endl; cout << " -h Server name, IP address or directory" << endl; cout << " -p Server port" << endl; cout << " -d Database or file name" << endl; cout << " -u User name for authentication" << endl; cout << " -w Password for authentication" << endl; cout << " -e Force encrypted connection" << endl; cout << " -r Number of runs" << endl; cout << " -v Verbose mode" << endl; } int main( int argc, char* argv[] ) { int i, j, k; struct odbxstmt** stmts = NULL; struct odbxstmt* queries = NULL; string backend, host, port, db, user, pass; int param, verbose = 0, encrypt = 0, runs = 1; vector conn; while( ( param = getopt( argc, argv, "b:h:p:d:u:w:e:r:v" ) ) != -1 ) { switch( param ) { case 'b': backend = string( optarg ); break; case 'h': host = string( optarg ); break; case 'p': port = string( optarg ); break; case 'd': db = string( optarg ); break; case 'u': user = string( optarg ); break; case 'w': pass = string( optarg ); break; case 'v': verbose = 1; break; case 'e': if( optarg != NULL ) { encrypt = (int) strtol( optarg, NULL, 10 ); } break; case 'r': if( optarg != NULL ) { runs = (int) strtol( optarg, NULL, 10 ); } break; default: cerr << "Unknown option '" << (char) param << "' with arg '" << (char*) optarg << "'" << endl; return 1; } } if( !backend.size() ) { help( argv[0] ); return 1; } if( backend.find( "firebird", 0 ) != string::npos ) { stmts = firebird_stmt; } if( backend.find( "mssql", 0 ) != string::npos ) { stmts = mssql_stmt; } if( backend.find( "mysql", 0 ) != string::npos ) { stmts = mysql_stmt; } if( backend.find( "odbc", 0 ) != string::npos ) { stmts = odbc_stmt; } if( backend.find( "oracle", 0 ) != string::npos ) { stmts = oracle_stmt; } if( backend.find( "pgsql", 0 ) != string::npos ) { stmts = pgsql_stmt; } if( backend.find( "sqlite", 0 ) != string::npos ) { stmts = sqlite_stmt; } if( backend.find( "sqlite3", 0 ) != string::npos ) { stmts = sqlite3_stmt; } if( backend.find( "sybase", 0 ) != string::npos ) { stmts = sybase_stmt; } if( stmts == NULL ) { cerr << "Invalid backend: " << backend << endl; return 1; } queries = stmts[0]; if( verbose ) { cout << endl << "Parameter:" << endl; if( !backend.empty() ) { cout << " backend=" << backend << endl; } if( !host.empty() ) { cout << " host=" << host << endl; } if( !port.empty() ) { cout << " port=" << port << endl; } if( !db.empty() ) { cout << " database=" << db << endl; } if( !user.empty() ) { cout << " user=" << user << endl; } if( !pass.empty() ) { cout << " password=" << pass << endl; } if( encrypt ) { cout << " encrypt=" << encrypt << endl; } if( runs ) { cout << " runs=" << runs << endl; } if( verbose ) { cout << " verbose=" << verbose << endl; } } for( j = 0; j < runs; j++ ) { try { if( verbose ) { cout << endl << j+1 << ". Run:" << endl; } conn.resize( 2 ); for( k = 0; k < 2; k++ ) { if( verbose ) { cout << " Conn::Conn()" << endl; } conn[k] = Conn( backend, host, port ); if( verbose ) { cout << " Conn::getCapability()" << endl; } for( i = 0; i < CAPMAX; i++ ) { cap[i].result = (int) conn[k].getCapability( (odbxcap) cap[i].value ); cout << " " << cap[i].name << ": " << cap[i].result << endl; } if( verbose ) { cout << " Conn::{get/set}Option()" << endl; } for( i = 0; i < OPTMAX; i++ ) { conn[k].getOption( (odbxopt) opt[i].value, (void*) &(opt[i].result) ); cout << " " << opt[i].name << ": " << opt[i].result << " " << ( ( opt[i].result && opt[i].tryit ) ? "(using)" : "" ) << endl; if( opt[i].result && opt[i].tryit ) { conn[k].setOption( (odbxopt) opt[i].value, (void*) &(opt[i].tryit) ); } if( opt[i].value == ODBX_OPT_MULTI_STATEMENTS && opt[i].tryit && opt[i].result ) { queries = stmts[1]; } } if( encrypt ) { conn[k].setOption( ODBX_OPT_TLS, (void*) &encrypt ); } if( verbose ) { cout << " Conn::bind()" << endl; } conn[k].bind( db, user, pass ); } for( i = 0; i < runs; i++ ) { exec( conn, queries, verbose ); } for( k = 0; k < 2; k++ ) { if( verbose ) { cout << " Conn::unbind()" << endl; } conn[k].unbind(); if( verbose ) { cout << " Conn::finish()" << endl; } conn[k].finish(); } } catch( OpenDBX::Exception& oe ) { cerr << "Caught exception: " << oe.what() << endl; return 1; } catch( std::exception& e ) { cerr << "Caught STL exception: " << e.what() << endl; return 1; } catch( ... ) { cerr << "Caught unknown exception" << endl; return 1; } } return 0; } void exec( vector& conn, struct odbxstmt* qptr, int verbose ) { odbxres stat; unsigned long fields, i; struct timeval tv; int cap = conn[qptr->num].getCapability( ODBX_CAP_LO ); while( qptr->str != NULL ) { try { if( verbose ) { cout << " Stmt::execute(" << qptr->num << "): '" << qptr->str << "'" << endl; } Stmt stmt = conn[qptr->num].create( qptr->str ); Result result = stmt.execute(); tv.tv_sec = 3; tv.tv_usec = 0; while( ( stat = result.getResult( &tv, 5 ) ) != ODBX_RES_DONE ) { if( verbose ) { cout << " Result::getResult()" << endl; } tv.tv_sec = 3; tv.tv_usec = 0; switch( stat ) { case ODBX_RES_TIMEOUT: cout << " Result::getResult(): Timeout" << endl; continue; case ODBX_RES_NOROWS: cout << " Affected rows: " << result.rowsAffected() << endl; continue; default: break; } if( verbose ) { cout << " Result::getColumnCount()" << endl; } fields = result.columnCount(); while( result.getRow() != ODBX_ROW_DONE ) { if( verbose ) { cout << " Result::getRow()" << endl; } for( i = 0; i < fields; i++ ) { cout << " column " << result.columnPos( result.columnName( i ) ) << " (type " << result.columnType( i ) << "): " << result.columnName( i ) << " = "; switch( result.columnType( i ) ) { case ODBX_TYPE_BLOB: case ODBX_TYPE_CLOB: if( cap == ODBX_ENABLE ) { lob_read( result, i ); break; } default: if( result.fieldValue( i ) == NULL ) { cout << "NULL" << endl; } else { cout << "'" << string( result.fieldValue( i ) ) << "'" << endl; } } } } // Test case: Calling columnPos() with non-existing column name try { result.columnPos( "non-existing" ); throw std::runtime_error( string( "No exception thrown using columnPos() for non-exising column name" ) ); } catch( OpenDBX::Exception& oe ) { if( oe.getType() < 0 ) { throw oe; } } // Test case: Calling getRow() more often must not result in error if( result.getRow() != ODBX_ROW_DONE ) { throw std::runtime_error( string( "Sub-sequent calls to getRow() don't return ODBX_RES_DONE" ) ); } } // Test case: Calling getResult() more often must not result in error if( result.getResult() != ODBX_RES_DONE ) { throw std::runtime_error( string( "Sub-sequent calls to getResult() don't return ODBX_RES_DONE" ) ); } result.finish(); } catch( OpenDBX::Exception& oe ) { if( oe.getType() < 0 ) { throw oe; } cerr << "Error in exec(): " << oe.what() << endl; } qptr++; } } void lob_read( Result& result, int pos ) { char buffer[64]; ssize_t bytes; Lob lob = result.getLob( result.fieldValue( pos ) ); cout << "'"; while( ( bytes = lob.read( buffer, sizeof( buffer ) - 1 ) ) != 0 ) { buffer[bytes] = 0; cout << buffer; } cout << "'" << endl; lob.close(); } opendbx-1.4.6/test/odbxtest.sh0000755000175000017500000000644211751465123013267 00000000000000#!/bin/sh # # Automated regression testing # if ! test -f odbxtest.site then echo "No odbxtest.site file found" fi ODBXAPP="./odbxtest ./odbxplustest" # Import database parameter . ./odbxtest.site # compare results odbxcompare () { diff -b test.out ref/$1.ref > /dev/null if test $? -eq 1 then echo " $1 FAILED" echo " $1 FAILED" >> testresult.log echo "" >> testresult.err echo "$1 ERRORS:" >> testresult.err cat test.err >> testresult.err diff -b test.out ref/$1.ref >> testresult.err else echo " $1 OK" echo " $1 OK" >> testresult.log fi } echo "`date`:" > testresult.log echo "`date`:" > testresult.err for app in $ODBXAPP do echo "testing $app" for backend in $ODBXTEST_BACKENDS do case $backend in firebird) $ODBXAPP \ -b "../backends/firebird/.libs/libfirebirdbackend.so" \ -h "$FIREBIRD_HOST" \ -p "$FIREBIRD_PORT" \ -d "$FIREBIRD_DATABASE" \ -u "$FIREBIRD_USERNAME" \ -w "$FIREBIRD_PASSWORD" \ 1>test.out 2>test.err odbxcompare firebird ;; mssql) $ODBXAPP \ -b "../backends/mssql/.libs/libmssqlbackend.so" \ -h "$MSSQL_HOST" \ -p "$MSSQL_PORT" \ -d "$MSSQL_DATABASE" \ -u "$MSSQL_USERNAME" \ -w "$MSSQL_PASSWORD" \ 1>test.out 2>test.err odbxcompare mssql ;; mysql) $ODBXAPP \ -b "../backends/mysql/.libs/libmysqlbackend.so" \ -h "$MYSQL_HOST" \ -p "$MYSQL_PORT" \ -d "$MYSQL_DATABASE" \ -u "$MYSQL_USERNAME" \ -w "$MYSQL_PASSWORD" \ 1>test.out 2>test.err odbxcompare mysql ;; odbc) $ODBXAPP \ -b "../backends/odbc/.libs/libodbcbackend.so" \ -h "$ODBC_HOST" \ -p "$ODBC_PORT" \ -d "$ODBC_DATABASE" \ -u "$ODBC_USERNAME" \ -w "$ODBC_PASSWORD" \ 1>test.out 2>test.err odbxcompare odbc ;; oracle) LD_LIBRARY_PATH="/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/lib" \ $ODBXAPP \ -b "../backends/oracle/.libs/liboraclebackend.so" \ -h "$ORACLE_HOST" \ -p "$ORACLE_PORT" \ -d "$ORACLE_DATABASE" \ -u "$ORACLE_USERNAME" \ -w "$ORACLE_PASSWORD" \ 1>test.out 2>test.err odbxcompare oracle ;; pgsql) $ODBXAPP \ -b "../backends/pgsql/.libs/libpgsqlbackend.so" \ -h "$PGSQL_HOST" \ -p "$PGSQL_PORT2" \ -d "$PGSQL_DATABASE" \ -u "$PGSQL_USERNAME" \ -w "$PGSQL_PASSWORD" \ 1>test.out 2>test.err odbxcompare pgsql ;; sqlite) $ODBXAPP \ -b "../backends/sqlite/.libs/libsqlitebackend.so" \ -h "$SQLITE_HOST" \ -p "$SQLITE_PORT" \ -d "$SQLITE_DATABASE" \ -u "$SQLITE_USERNAME" \ -w "$SQLITE_PASSWORD" \ 1>test.out 2>test.err odbxcompare sqlite ;; sqlite3) $ODBXAPP \ -b "../backends/sqlite3/.libs/libsqlite3backend.so" \ -h "$SQLITE3_HOST" \ -p "$SQLITE3_PORT" \ -d "$SQLITE3_DATABASE" \ -u "$SQLITE3_USERNAME" \ -w "$SQLITE3_PASSWORD" \ 1>test.out 2>test.err odbxcompare sqlite3 ;; sybase) $ODBXAPP \ -b "../backends/sybase/.libs/libsybasebackend.so" \ -h "$SYBASE_HOST" \ -p "$SYBASE_PORT" \ -d "$SYBASE_DATABASE" \ -u "$SYBASE_USERNAME" \ -w "$SYBASE_PASSWORD" \ 1>test.out 2>test.err odbxcompare sybase ;; esac done done # cleanup rm -f test.out rm -f test.err exit 0 opendbx-1.4.6/Makefile.in0000644000175000017500000006413411765211301012154 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(srcdir)/opendbx.pc.in $(srcdir)/opendbx.spec.in \ $(srcdir)/opendbxplus.pc.in $(top_srcdir)/configure ABOUT-NLS \ AUTHORS COPYING ChangeLog INSTALL NEWS TODO compile \ config.guess config.rpath config.sub depcomp install-sh \ ltmain.sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = opendbx.spec opendbx.pc opendbxplus.pc CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkgconfigdir)" DATA = $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ ACLOCAL_AMFLAGS = -I m4 SUBDIRS = backends doc lib po test utils EXTRA_DIST = config.rpath \ debian/changelog \ debian/compat \ debian/control \ debian/copyright \ debian/docs \ debian/rules \ debian/watch \ opendbx.pc.in \ opendbxplus.pc.in \ opendbx.spec.in \ opendbx.spec \ ABOUT-NLS pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = opendbx.pc opendbxplus.pc all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 opendbx.spec: $(top_builddir)/config.status $(srcdir)/opendbx.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ opendbx.pc: $(top_builddir)/config.status $(srcdir)/opendbx.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ opendbxplus.pc: $(top_builddir)/config.status $(srcdir)/opendbxplus.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-pkgconfigDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-pkgconfigDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ctags-recursive install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-libtool distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-pkgconfigDATA install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-pkgconfigDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/opendbx.spec0000644000175000017500000003261311765211344012426 00000000000000# # OpenDBX rpm spec file # # By default OpenDBX is build with this backends: # - mysql # - odbc # - pgsql # - sqlite3 # to disable use --without [module-name] # # Optional supported backends are: # - firebird # - mssql # - oracle # - sqlite # - sybase # to enable use --with [module-name] # %if 0%{?_with_firebird:1} %define build_firebird 1 %endif %if 0%{!?_without_firebird:1} && 0%{?fedora} >= 12 %define build_firebird 1 %endif %if 0%{!?_without_firebird:1} && 0%{?suse_version} >= 1120 %define build_firebird 1 %endif %if 0%{?_with_mssql:1} %define build_mssql 1 %endif %if 0%{!?_without_mssql:1} && 0%{?fedora} >= 9 %define build_mssql 1 %endif %if 0%{!?_without_mssql:1} && 0%{?mdkversion} >= 200910 %define build_mssql 1 %endif %if 0%{!?_without_mysql:1} %define build_mysql 1 %endif %if 0%{!?_without_odbc:1} %define build_odbc 1 %endif %if 0%{?_with_oracle:1} %define build_oracle 1 %endif %if 0%{!?_without_pgsql:1} %define build_pgsql 1 %endif %if 0%{?_with_sqlite:1} %define build_sqlite 1 %endif %if 0%{!?_without_sqlite3:1} %define build_sqlite3 1 %endif %if 0%{?_with_sybase:1} %define build_sybase 1 %endif %if 0%{!?_without_sybase:1} && 0%{?fedora} >= 9 %define build_mssql 1 %endif %if 0%{!?_without_sybase:1} && 0%{?mdkversion} >= 200910 %define build_mssql 1 %endif Name: opendbx Version: 1.4.6 Release: 1 Summary: Unified database layer with a clean and lightweight interface Summary(de.UTF-8): Bibliothek zum Zugriff auf Datenbanken über eine einheitliche Schnittstelle Summary(pl.UTF-8): Rozszerzana biblioteka dostÄ™pu do baz danych Group: Development/Libraries License: LGPL URL: http://www.linuxnetworks.de/opendbx/download/ Source0: %{name}-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: gcc-c++, gettext %description OpenDBX provides a clean and lightweight API for interfacing native relational database APIs in a consistent way. By using the OpenDBX API you don't have to adapt your program to the different database APIs by yourself. %description -l de.UTF-8 OpenDBX ist eine schlanke und einfach zu verwendende Bibliothek, die es ermöglicht verschiedene Datenbankserver über eine konsistente Schnittstelle anzusprechen. %description -l pl.UTF-8 OpenDBX to skrajnie lekka, ale rozszerzalna biblioteka dostÄ™pu do baz danych napisana w C. UdostÄ™pnia warstwÄ™ abstrakcji dla wszystkich obsÅ‚ugiwanych baz danych w jednym, przejrzystym i prostym interfejsie automatycznie prowadzÄ…cym do eleganckiego projektu kodu. Jest to odpowiednia biblioteka, aby maÅ‚ym nakÅ‚adem pracy aplikacja obsÅ‚ugiwaÅ‚a różne bazy danych. %package utils Summary: Utility application for manipulating database content Summary(de.UTF-8): Hilfswerkzeuge für die Manipulation von Datenbankinhalten Group: Applications/Databases Requires: %{name} >= %{version} Requires: readline, ncurses BuildRequires: gcc-c++, gettext, readline, readline-devel, ncurses, ncurses-devel %description utils Utility application for manipulating database content either interactively by the user or in batch mode. %description utils -l de.UTF-8 Hilfswerkzeuge für die Manipulation von Datenbankinhalten, entweder interaktiv durch den Benutzer oder im Stapelbetrieb durch ein anderes Programm. %package devel Summary: OpenDBX development headers Summary(de.UTF-8): Entwicklungsschnittstellen für OpenDBX Summary(pl.UTF-8): Pliki nagłówkowe biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: pkgconfig BuildRequires: doxygen %description devel Header files for the OpenDBX database abstraction library %description devel -l de.UTF-8 Schnittstellen der OpenDBX Datenbankbibliothek zur Softwareentwicklung %description devel -l pl.UTF-8 Pliki nagłówkowe biblioteki opendbx. %if 0%{?build_firebird:1} %package firebird Summary: Firebird/Interbase backend for OpenDBX Summary(de.UTF-8): Firebird/Interbase Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych Firebird dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: firebird BuildRequires: firebird-devel %description firebird Firebird/Interbase backend for the OpenDBX database abstraction library %description firebird -l de.UTF-8 Firebird/Interbase Unterstützung für die OpenDBX Datenbankbibliothek %description firebird -l pl.UTF-8 Backend bazy danych Firebird dla biblioteki opendbx. %endif %if 0%{?build_mssql:1} %package mssql Summary: MS SQL Server backend for OpenDBX Summary(de.UTF-8): MS SQL Server Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych MS SQL dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: freetds BuildRequires: freetds-devel %description mssql MS SQL Server backend for the OpenDBX database abstraction library %description mssql -l de.UTF-8 MS SQL Server Unterstützung für die OpenDBX Datenbankbibliothek %description mssql -l pl.UTF-8 Backend bazy danych MS SQL dla biblioteki opendbx. %endif %if 0%{?build_mysql:1} %package mysql Summary: MySQL backend for OpenDBX Summary(de.UTF-8): MySQL Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych MySQL dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: mysql BuildRequires: mysql-devel %description mysql MySQL backend for the OpenDBX database abstraction library %description mysql -l de.UTF-8 MySQL Unterstützung für die OpenDBX Datenbankbibliothek %description mysql -l pl.UTF-8 Backend bazy danych MySQL dla biblioteki opendbx. %endif %if 0%{?build_odbc:1} %package odbc Summary: ODBC backend for OpenDBX Summary(de.UTF-8): ODBC Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych ODBC dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: unixODBC BuildRequires: unixODBC-devel %description odbc ODBC backend for the OpenDBX database abstraction library %description odbc -l de.UTF-8 ODBC Unterstützung für die OpenDBX Datenbankbibliothek %description odbc -l pl.UTF-8 Backend bazy danych ODBC dla biblioteki opendbx. %endif %if 0%{?build_oracle:1} %package oracle Summary: Oracle backend for OpenDBX Summary(de.UTF-8): Oracle Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych Oracle dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} %description oracle Oracle ctlib backend for the OpenDBX database abstraction library %description oracle -l de.UTF-8 Oracle Unterstützung für die OpenDBX Datenbankbibliothek %description oracle -l pl.UTF-8 Backend bazy danych Oracle dla biblioteki OpenDBX. %endif %if 0%{?build_pgsql:1} %package pgsql Summary: PostgreSQL backend for OpenDBX Summary(de.UTF-8): PostgreSQL Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych PostgreSQL dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: postgresql BuildRequires: postgresql-devel %description pgsql PostgreSQL backend for the OpenDBX database abstraction library %description pgsql -l de.UTF-8 PostgreSQL Unterstützung für die OpenDBX Datenbankbibliothek %description pgsql -l pl.UTF-8 Backend bazy danych PostgreSQL dla biblioteki opendbx. %endif %if 0%{?build_sqlite:1} %package sqlite Summary: SQLite backend for OpenDBX Summary(de.UTF-8): SQLite Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych SQLite dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: sqlite < 3.0 BuildRequires: sqlite-devel < 3.0 %description sqlite SQLite backend for the OpenDBX database abstraction library %description sqlite -l de.UTF-8 Sqlite Unterstützung für die OpenDBX Datenbankbibliothek %description sqlite -l pl.UTF-8 Backend bazy danych sqlite dla biblioteki opendbx. %endif %if 0%{?build_sqlite3:1} %package sqlite3 Summary: SQLite3 backend for OpenDBX Summary(de.UTF-8): SQLite3 Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych SQLite3 dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} %if 0%{?mandriva_version} Requires: sqlite3 BuildRequires: sqlite3-devel %else Requires: sqlite >= 3.0 BuildRequires: sqlite-devel >= 3.0 %endif %description sqlite3 SQLite3 backend for the OpenDBX database abstraction library %description sqlite3 -l de.UTF-8 Sqlite3 Unterstützung für die OpenDBX Datenbankbibliothek %description sqlite3 -l pl.UTF-8 Backend bazy danych sqlite3 dla biblioteki opendbx. %endif %if 0%{?build_sybase:1} %package sybase Summary: Sybase backend for OpenDBX Summary(de.UTF-8): Sybase Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych Sybase dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: freetds BuildRequires: freetds-devel %description sybase Sybase ctlib backend for the OpenDBX database abstraction library %description sybase -l de.UTF-8 Sybase Unterstützung für die OpenDBX Datenbankbibliothek %description sybase -l pl.UTF-8 Backend bazy danych sybase dla biblioteki opendbx. %endif %prep %setup -q -n opendbx-%{version} %build CPPFLAGS="%{!?_without_mysql:-I/usr/include/mysql} %{!?_without_pgsql:-I/usr/include/pgsql}"; export CPPFLAGS; LDFLAGS="-L/lib64 %{!?_without_mysql:-L/usr/lib/mysql -L/usr/lib64/mysql}"; export LDFLAGS; %configure \ --disable-rpath \ --disable-static \ --with-backends="\ %{?build_firebird:firebird }\ %{?build_mssql:mssql }\ %{?build_mysql:mysql }\ %{?build_odbc:odbc }\ %{?build_oracle:oracle }\ %{?build_pgsql:pgsql }\ %{?build_sqlite:sqlite }\ %{?build_sqlite3:sqlite3 }\ %{?build_sybase:sybase }\ " || cat config.log %{__make} %{?_smp_mflags} %install %{__make} DESTDIR=%{buildroot} install rm %{buildroot}%{_libdir}/lib*.*a rm %{buildroot}%{_libdir}/opendbx/lib*.*a %find_lang %{name} %find_lang %{name}-utils %clean if test "%{buildroot}" != "/"; then rm -rf %{buildroot}; fi %post -p /sbin/ldconfig %postun -p /sbin/ldconfig %files -f %{name}.lang %defattr(-,root,root,-) %{_libdir}/libopendbx.so.* %{_libdir}/libopendbxplus.so.* %dir %{_libdir}/opendbx %doc AUTHORS COPYING ChangeLog NEWS README TODO %files utils -f %{name}-utils.lang %defattr(-,root,root,-) %{_bindir}/odbx-sql %{_datadir}/%{name} %{_datadir}/%{name}/keywords #%{_mandir}/man1/* %files devel %defattr(-,root,root,-) %{_includedir}/odbx.h %{_includedir}/opendbx %{_includedir}/opendbx/api* %{_libdir}/libopendbx.so %{_libdir}/libopendbxplus.so %{_libdir}/pkgconfig/opendbx.pc %{_libdir}/pkgconfig/opendbxplus.pc #%{_mandir}/man3/* %if 0%{?build_firebird:1} %files firebird %defattr(-,root,root,-) %{_libdir}/opendbx/libfirebirdbackend.so* %endif %if 0%{?build_mssql:1} %files mssql %defattr(-,root,root,-) %{_libdir}/opendbx/libmssqlbackend.so* %endif %if 0%{?build_mysql:1} %files mysql %defattr(-,root,root,-) %{_libdir}/opendbx/libmysqlbackend.so* %endif %if 0%{?build_odbc:1} %files odbc %defattr(-,root,root,-) %{_libdir}/opendbx/libodbcbackend.so* %endif %if 0%{?build_oracle:1} %files oracle %defattr(-,root,root,-) %{_libdir}/opendbx/liboraclebackend.so* %endif %if 0%{?build_pgsql:1} %files pgsql %defattr(-,root,root,-) %{_libdir}/opendbx/libpgsqlbackend.so* %endif %if 0%{?build_sqlite:1} %files sqlite %defattr(-,root,root,-) %{_libdir}/opendbx/libsqlitebackend.so* %endif %if 0%{?build_sqlite3:1} %files sqlite3 %defattr(-,root,root,-) %{_libdir}/opendbx/libsqlite3backend.so* %endif %if 0%{?build_sybase:1} %files sybase %defattr(-,root,root,-) %{_libdir}/opendbx/libsybasebackend.so* %endif %changelog * Mon Apr 19 2010 Norbert Sendetzky 1.4.5-1 - Centralized decisions which backends to build - Build firebird, mssql and sybase backends for supported distributions - Reordered backends * Wed Sep 30 2009 Norbert Sendetzky 1.4.4-1 - Fixed included backends in main package - Fixed odbx package - Fixed builds on x86_64 platforms - Compatible with OpenSUSE build service - Added workarounds for RHEL, CentOS and Mandriva regarding readline * Sun Apr 19 2009 Norbert Sendetzky 1.4.1-1 - Added opendbxplus.pc * Sun Jun 15 2008 Norbert Sendetzky 1.3.11-1 - Added items for odbc backend and utils * Mon Mar 17 2008 Norbert Sendetzky 1.3.7-1 - Added polish summary and descriptions (thanks to PLD team) - Added items for oracle backend * Wed Jan 31 2007 Norbert Sendetzky 1.2.1-1 - Added german summary and descriptions - Disabled static library builds and removed libtool files - Added ldconfig call in post and postun sections - Added gettext and pkgconfig as requirements - Replaced language file handling with find_lang macro - Used optflags macro instead of hard coded compiler flags - Used macro style consistently - Corrected mail addresses - Removed oracle sections - Fixed _without_pgqql - Minor changes * Sat Dec 09 2006 Norbert Sendetzky 1.1.8-1 - Added mssql, sybase and oracle backend * Tue Jun 13 2006 Kees Monshouwer 1.1.0-2 - Fixed a few minor problems - Added conditional build support - Added firefird and freetds backend * Mon Jun 12 2006 Kees Monshouwer 1.1.0-1 - Initial build for CentOS 4.3 opendbx-1.4.6/lib/0000755000175000017500000000000011765214162010735 500000000000000opendbx-1.4.6/lib/odbxlib.h0000644000175000017500000000223511425153451012447 00000000000000 /* * OpenDBX library handling interface * Copyright (C) 2004-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #ifdef HAVE_CONFIG_H #include #endif #ifndef ODBXLIB_H #define ODBXLIB_H /* LIBPATH is defined in Makefile.am */ #define ODBX_PATHSIZE 1023 int _odbx_lib_open( struct odbx_t* handle, const char* backend ); int _odbx_lib_close( struct odbx_t* handle ); #endif opendbx-1.4.6/lib/Makefile.in0000644000175000017500000006612611765211301012725 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @SINGLELIB_TRUE@am__append_1 = -DODBX_SINGLELIB @SINGLELIB_TRUE@am__append_2 = @backendlibs@ @SINGLELIB_FALSE@am__append_3 = -DLIBPATH=\"$(pkglibdir)\" -DLIBPREFIX=\"@LIBPREFIX@\" -DLIBSUFFIX=\"@LIBSUFFIX@\" subdir = lib DIST_COMMON = $(include_HEADERS) $(nobase_include_HEADERS) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" \ "$(DESTDIR)$(includedir)" LTLIBRARIES = $(lib_LTLIBRARIES) am__DEPENDENCIES_1 = libopendbx_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) am_libopendbx_la_OBJECTS = libopendbx_la-odbxlib.lo \ libopendbx_la-odbx.lo libopendbx_la_OBJECTS = $(am_libopendbx_la_OBJECTS) libopendbx_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libopendbx_la_LDFLAGS) $(LDFLAGS) -o $@ libopendbxplus_la_DEPENDENCIES = $(am__DEPENDENCIES_1) libopendbx.la am_libopendbxplus_la_OBJECTS = libopendbxplus_la-odbx_impl.lo \ libopendbxplus_la-odbx.lo libopendbxplus_la_OBJECTS = $(am_libopendbxplus_la_OBJECTS) libopendbxplus_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CXXLD) \ $(libopendbxplus_la_CXXFLAGS) $(CXXFLAGS) \ $(libopendbxplus_la_LDFLAGS) $(LDFLAGS) -o $@ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libopendbx_la_SOURCES) $(libopendbxplus_la_SOURCES) DIST_SOURCES = $(libopendbx_la_SOURCES) $(libopendbxplus_la_SOURCES) HEADERS = $(include_HEADERS) $(nobase_include_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ include_HEADERS = odbx.h nobase_include_HEADERS = opendbx/api.h opendbx/api lib_LTLIBRARIES = libopendbx.la libopendbxplus.la libopendbx_la_SOURCES = odbxlib.c odbxlib.h odbx.c odbxdrv.h libopendbx_la_CPPFLAGS = -DLIBVERSION=@LIBVERSION@ \ -DLOCALEDIR=\"$(localedir)\" $(am__append_1) $(am__append_3) libopendbx_la_LDFLAGS = -no-undefined -version-info @APIVERSION@ libopendbx_la_LIBADD = $(MAINLIBS) $(LTLIBINTL) $(am__append_2) libopendbxplus_la_SOURCES = odbx_iface.hpp odbx_impl.hpp odbx_impl.cpp odbx.cpp libopendbxplus_la_CXXFLAGS = -DLIBVERSION=@LIBVERSION@ libopendbxplus_la_LDFLAGS = -no-undefined -version-info @APIPLUSVERSION@ libopendbxplus_la_LIBADD = $(LTLIBINTL) libopendbx.la all: all-am .SUFFIXES: .SUFFIXES: .c .cpp .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu lib/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libopendbx.la: $(libopendbx_la_OBJECTS) $(libopendbx_la_DEPENDENCIES) $(libopendbx_la_LINK) -rpath $(libdir) $(libopendbx_la_OBJECTS) $(libopendbx_la_LIBADD) $(LIBS) libopendbxplus.la: $(libopendbxplus_la_OBJECTS) $(libopendbxplus_la_DEPENDENCIES) $(libopendbxplus_la_LINK) -rpath $(libdir) $(libopendbxplus_la_OBJECTS) $(libopendbxplus_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libopendbx_la-odbx.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libopendbx_la-odbxlib.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libopendbxplus_la-odbx.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libopendbxplus_la-odbx_impl.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libopendbx_la-odbxlib.lo: odbxlib.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libopendbx_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libopendbx_la-odbxlib.lo -MD -MP -MF $(DEPDIR)/libopendbx_la-odbxlib.Tpo -c -o libopendbx_la-odbxlib.lo `test -f 'odbxlib.c' || echo '$(srcdir)/'`odbxlib.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libopendbx_la-odbxlib.Tpo $(DEPDIR)/libopendbx_la-odbxlib.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='odbxlib.c' object='libopendbx_la-odbxlib.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libopendbx_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libopendbx_la-odbxlib.lo `test -f 'odbxlib.c' || echo '$(srcdir)/'`odbxlib.c libopendbx_la-odbx.lo: odbx.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libopendbx_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libopendbx_la-odbx.lo -MD -MP -MF $(DEPDIR)/libopendbx_la-odbx.Tpo -c -o libopendbx_la-odbx.lo `test -f 'odbx.c' || echo '$(srcdir)/'`odbx.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libopendbx_la-odbx.Tpo $(DEPDIR)/libopendbx_la-odbx.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='odbx.c' object='libopendbx_la-odbx.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libopendbx_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libopendbx_la-odbx.lo `test -f 'odbx.c' || echo '$(srcdir)/'`odbx.c .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< libopendbxplus_la-odbx_impl.lo: odbx_impl.cpp @am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libopendbxplus_la_CXXFLAGS) $(CXXFLAGS) -MT libopendbxplus_la-odbx_impl.lo -MD -MP -MF $(DEPDIR)/libopendbxplus_la-odbx_impl.Tpo -c -o libopendbxplus_la-odbx_impl.lo `test -f 'odbx_impl.cpp' || echo '$(srcdir)/'`odbx_impl.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libopendbxplus_la-odbx_impl.Tpo $(DEPDIR)/libopendbxplus_la-odbx_impl.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='odbx_impl.cpp' object='libopendbxplus_la-odbx_impl.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libopendbxplus_la_CXXFLAGS) $(CXXFLAGS) -c -o libopendbxplus_la-odbx_impl.lo `test -f 'odbx_impl.cpp' || echo '$(srcdir)/'`odbx_impl.cpp libopendbxplus_la-odbx.lo: odbx.cpp @am__fastdepCXX_TRUE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libopendbxplus_la_CXXFLAGS) $(CXXFLAGS) -MT libopendbxplus_la-odbx.lo -MD -MP -MF $(DEPDIR)/libopendbxplus_la-odbx.Tpo -c -o libopendbxplus_la-odbx.lo `test -f 'odbx.cpp' || echo '$(srcdir)/'`odbx.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/libopendbxplus_la-odbx.Tpo $(DEPDIR)/libopendbxplus_la-odbx.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='odbx.cpp' object='libopendbxplus_la-odbx.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libopendbxplus_la_CXXFLAGS) $(CXXFLAGS) -c -o libopendbxplus_la-odbx.lo `test -f 'odbx.cpp' || echo '$(srcdir)/'`odbx.cpp mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(includedir)" && rm -f $$files install-nobase_includeHEADERS: $(nobase_include_HEADERS) @$(NORMAL_INSTALL) test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \ $(am__nobase_list) | while read dir files; do \ xfiles=; for file in $$files; do \ if test -f "$$file"; then xfiles="$$xfiles $$file"; \ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ test -z "$$xfiles" || { \ test "x$$dir" = x. || { \ echo "$(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \ $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \ echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \ $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \ done uninstall-nobase_includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \ $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(includedir)" && rm -f $$files ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-includeHEADERS install-nobase_includeHEADERS install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-libLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \ uninstall-nobase_includeHEADERS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libLTLIBRARIES clean-libtool ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-includeHEADERS install-info \ install-info-am install-libLTLIBRARIES install-man \ install-nobase_includeHEADERS install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-includeHEADERS \ uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/lib/odbx_impl.hpp0000644000175000017500000000716011425153451013343 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "lib/odbx_iface.hpp" #include "lib/opendbx/api" #include #include #include #ifndef ODBX_IMPL_HPP #define ODBX_IMPL_HPP namespace OpenDBX { using std::string; using std::vector; using std::map; class Lob_Impl : public Lob_Iface { odbx_lo_t* m_lo; odbx_result_t* m_result; bool m_close; public: Lob_Impl( odbx_result_t* result, const char* value ) throw( std::exception ); ~Lob_Impl() throw(); void close() throw( std::exception ); ssize_t read( void* buffer, size_t buflen ) throw( std::exception ); ssize_t write( void* buffer, size_t buflen ) throw( std::exception ); }; class Result_Impl : public Result_Iface { odbx_t* m_handle; odbx_result_t* m_result; map m_pos; public: Result_Impl( odbx_t* handle ) throw( std::exception ); ~Result_Impl() throw(); void finish() throw( std::exception ); odbxres getResult( struct timeval* timeout, unsigned long chunk ) throw( std::exception ); odbxrow getRow() throw( std::exception ); uint64_t rowsAffected() throw( std::exception ); unsigned long columnCount() throw( std::exception ); unsigned long columnPos( const string& name ) throw( std::exception ); const string columnName( unsigned long pos ) throw( std::exception ); odbxtype columnType( unsigned long pos ) throw( std::exception ); unsigned long fieldLength( unsigned long pos ) throw( std::exception ); const char* fieldValue( unsigned long pos ) throw( std::exception ); Lob_Iface* getLob( const char* value ) throw( std::exception ); }; class Stmt_Impl : public Stmt_Iface { odbx_t* m_handle; protected: odbx_t* _getHandle() const throw(); public: Stmt_Impl( odbx_t* handle ) throw( std::exception ); }; class StmtSimple_Impl : public Stmt_Impl { string m_sql; vector m_flags; vector m_pos; vector m_binds; vector m_bindsize; size_t m_bufsize; char* m_buffer; protected: // inline void _exec_params() throw( std::exception ); inline void _exec_noparams() throw( std::exception ); public: StmtSimple_Impl( odbx_t* handle, const string& sql ) throw( std::exception ); StmtSimple_Impl() throw( std::exception ); ~StmtSimple_Impl() throw(); // void bind( const void* data, unsigned long size, size_t pos, int flags ); // size_t count(); Result_Iface* execute() throw( std::exception ); }; class Conn_Impl : public Conn_Iface { odbx_t* m_handle; char* m_escbuf; unsigned long m_escsize; bool m_unbind, m_finish; protected: inline char* _resize( char* buffer, size_t size ) throw( std::exception ); public: Conn_Impl( const char* backend, const char* host, const char* port ) throw( std::exception ); ~Conn_Impl() throw(); void finish() throw( std::exception ); void bind( const char* database, const char* who, const char* cred, odbxbind method = ODBX_BIND_SIMPLE ) throw( std::exception ); void unbind() throw( std::exception ); bool getCapability( odbxcap cap ) throw( std::exception ); void getOption( odbxopt option, void* value ) throw( std::exception ); void setOption( odbxopt option, void* value ) throw( std::exception ); string& escape( const char* from, unsigned long fromlen, string& to ) throw( std::exception ); Stmt_Iface* create( const string& sql, Stmt::Type type ) throw( std::exception ); }; } // namespace #endif opendbx-1.4.6/lib/odbx.cpp0000644000175000017500000002163311425153451012316 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbx_impl.hpp" #include "opendbx/api" #include /* * Public C++ OpenDBX library interface */ namespace OpenDBX { /* * OpenDBX exception implementation */ Exception::Exception( const string& msg, int error, int type ) throw() : std::runtime_error( msg ) { m_error = error; m_type = type; } int Exception::getCode() const throw() { return m_error; } int Exception::getType() const throw() { return m_type; } /* * OpenDBX large object interface */ Lob::Lob( Lob_Iface* impl ) throw( std::exception ) { m_impl = impl; m_ref = new int; *m_ref = 1; } Lob::Lob( const Lob& ref ) throw() { m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); } Lob::~Lob() throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } } Lob& Lob::operator=( const Lob& ref ) throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); return *this; } void Lob::close() throw( std::exception ) { return m_impl->close(); } ssize_t Lob::read( void* buffer, size_t buflen ) throw( std::exception ) { return m_impl->read( buffer, buflen ); } ssize_t Lob::write( void* buffer, size_t buflen ) throw( std::exception ) { return m_impl->write( buffer, buflen ); } /* * OpenDBX result interface */ Result::Result( Result_Iface* impl ) throw( std::exception ) { m_impl = impl; m_ref = new int; *m_ref = 1; } Result::Result( const Result& ref ) throw() { m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); } Result::~Result() throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } } Result& Result::operator=( const Result& ref ) throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); return *this; } void Result::finish() throw( std::exception ) { return m_impl->finish(); } odbxres Result::getResult( struct timeval* timeout, unsigned long chunk ) throw( std::exception ) { return m_impl->getResult( timeout, chunk ); } odbxrow Result::getRow() throw( std::exception ) { return m_impl->getRow(); } uint64_t Result::rowsAffected() throw( std::exception ) { return m_impl->rowsAffected(); } unsigned long Result::columnCount() throw( std::exception ) { return m_impl->columnCount(); } unsigned long Result::columnPos( const string& name ) throw( std::exception ) { return m_impl->columnPos( name ); } const string Result::columnName( unsigned long pos ) throw( std::exception ) { return m_impl->columnName( pos ); } odbxtype Result::columnType( unsigned long pos ) throw( std::exception ) { return m_impl->columnType( pos ); } unsigned long Result::fieldLength( unsigned long pos ) throw( std::exception ) { return m_impl->fieldLength( pos ); } const char* Result::fieldValue( unsigned long pos ) throw( std::exception ) { return m_impl->fieldValue( pos ); } Lob Result::getLob( const char* value ) throw( std::exception ) { return m_impl->getLob( value ); } /* * OpenDBX Stmt interface */ Stmt::Stmt( Stmt_Iface* impl ) throw( std::exception ) { m_impl = impl; m_ref = new int; *m_ref = 1; } Stmt::Stmt( const Stmt& ref ) throw() { m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); } Stmt::~Stmt() throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } } Stmt& Stmt::operator=( const Stmt& ref ) throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); return *this; } // void Stmt::bind( const void* data, unsigned long size, size_t pos, int flags ) // { // m_impl->bind( data, size, pos, flags ); // } // size_t Stmt::count() // { // return m_impl->count(); // } Result Stmt::execute() throw( std::exception ) { return Result( m_impl->execute() ); } /* * OpenDBX connection interface */ Conn::Conn() throw() { m_impl = NULL; m_ref = NULL; } Conn::Conn( const char* backend, const char* host, const char* port ) throw( std::exception ) { m_impl = new Conn_Impl( backend, host, port ); m_ref = new int; *m_ref = 1; } Conn::Conn( const string& backend, const string& host, const string& port ) throw( std::exception ) { m_impl = new Conn_Impl( backend.c_str(), host.c_str(), port.c_str() ); m_ref = new int; *m_ref = 1; } Conn::Conn( const Conn& ref ) throw() { m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); } Conn::~Conn() throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } } Conn& Conn::operator=( const Conn& ref ) throw() { if( m_ref != NULL && --(*m_ref) == 0 ) { delete m_impl; delete m_ref; } m_impl = ref.m_impl; m_ref = ref.m_ref; if( m_ref == NULL ) { m_ref = new int; *m_ref = 0; } ++(*m_ref); return *this; } void Conn::bind( const char* database, const char* who, const char* cred, odbxbind method ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } m_impl->bind( database, who, cred, method ); } void Conn::bind( const string& database, const string& who, const string& cred, odbxbind method ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } m_impl->bind( database.c_str(), who.c_str(), cred.c_str(), method ); } void Conn::unbind() throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } m_impl->unbind(); } void Conn::finish() throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } m_impl->finish(); } bool Conn::getCapability( odbxcap cap ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } return m_impl->getCapability( cap ); } void Conn::getOption( odbxopt option, void* value ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } m_impl->getOption( option, value ); } void Conn::setOption( odbxopt option, void* value ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } m_impl->setOption( option, value ); } string& Conn::escape( const string& from, string& to ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } return m_impl->escape( from.c_str(), from.size(), to ); } string& Conn::escape( const char* from, unsigned long fromlen, string& to ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } return m_impl->escape( from, fromlen, to ); } Stmt Conn::create( const char* sql, unsigned long length, Stmt::Type type ) throw( std::exception ) { if( length == 0 ) { length = (unsigned long) strlen( sql ); } return this->create( string( sql, length ), type ); } Stmt Conn::create( const string& sql, Stmt::Type type ) throw( std::exception ) { if( m_impl == NULL ) { throw Exception( string( odbx_error( NULL, -ODBX_ERR_HANDLE ) ), -ODBX_ERR_HANDLE, odbx_error_type( NULL, -ODBX_ERR_HANDLE ) ); } return Stmt( m_impl->create( sql, type ) ); } } // namespace OpenDBX opendbx-1.4.6/lib/Makefile.am0000644000175000017500000000154411425153451012711 00000000000000include_HEADERS = odbx.h nobase_include_HEADERS = opendbx/api.h opendbx/api lib_LTLIBRARIES = libopendbx.la libopendbxplus.la libopendbx_la_SOURCES = odbxlib.c odbxlib.h odbx.c odbxdrv.h libopendbx_la_CPPFLAGS = -DLIBVERSION=@LIBVERSION@ -DLOCALEDIR=\"$(localedir)\" libopendbx_la_LDFLAGS = -no-undefined -version-info @APIVERSION@ libopendbx_la_LIBADD = $(MAINLIBS) $(LTLIBINTL) libopendbxplus_la_SOURCES = odbx_iface.hpp odbx_impl.hpp odbx_impl.cpp odbx.cpp libopendbxplus_la_CXXFLAGS = -DLIBVERSION=@LIBVERSION@ libopendbxplus_la_LDFLAGS = -no-undefined -version-info @APIPLUSVERSION@ libopendbxplus_la_LIBADD = $(LTLIBINTL) libopendbx.la if SINGLELIB libopendbx_la_CPPFLAGS += -DODBX_SINGLELIB libopendbx_la_LIBADD += @backendlibs@ else libopendbx_la_CPPFLAGS += -DLIBPATH=\"$(pkglibdir)\" -DLIBPREFIX=\"@LIBPREFIX@\" -DLIBSUFFIX=\"@LIBSUFFIX@\" endif opendbx-1.4.6/lib/odbxdrv.h0000644000175000017500000000517511425153451012502 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "opendbx/api.h" #include #ifdef HAVE_CONFIG_H #include #endif #ifndef ODBXDRV_H #define ODBXDRV_H /* * Internationalization support */ #ifdef ENABLE_NLS #ifdef HAVE_LIBINTL_H #include #endif #else #define dgettext(domain,string) string #endif #define gettext_noop(string) string /* * Commonly used handle and result structures */ struct odbx_t { struct odbx_ops* ops; void* backend; void* generic; void* aux; }; struct odbx_result_t { struct odbx_t* handle; void* generic; void* aux; }; struct odbx_lo_t { struct odbx_result_t* result; void* generic; }; /* * Structures describing capabilities */ struct odbx_basic_ops { int (*init) ( odbx_t* handle, const char* host, const char* port ); int (*bind) ( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); int (*unbind) ( odbx_t* handle ); int (*finish) ( odbx_t* handle ); int (*get_option) ( odbx_t* handle, unsigned int option, void* value ); int (*set_option) ( odbx_t* handle, unsigned int option, void* value ); const char* (*error) ( odbx_t* handle ); int (*error_type) ( odbx_t* handle ); int (*escape) ( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ); int (*query) ( odbx_t* handle, const char* query, unsigned long length ); int (*result) ( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); int (*result_finish) ( odbx_result_t* result ); int (*row_fetch) ( odbx_result_t* result ); uint64_t (*rows_affected) ( odbx_result_t* result ); unsigned long (*column_count) ( odbx_result_t* result ); const char* (*column_name) ( odbx_result_t* result, unsigned long pos ); int (*column_type) ( odbx_result_t* result, unsigned long pos ); unsigned long (*field_length) ( odbx_result_t* result, unsigned long pos ); const char* (*field_value) ( odbx_result_t* result, unsigned long pos ); }; struct odbx_lo_ops { int (*open) ( odbx_result_t* result, odbx_lo_t** lo, const char* value ); int (*close) ( odbx_lo_t* lo ); ssize_t (*read) ( odbx_lo_t* lo, void* buffer, size_t buflen ); ssize_t (*write) ( odbx_lo_t* lo, void* buffer, size_t buflen ); }; struct odbx_ops { struct odbx_basic_ops* basic; struct odbx_lo_ops* lo; }; /* * Make capabilities known to the OpenDBX library */ void odbxdrv_register( struct odbx_ops** ops ); #endif opendbx-1.4.6/lib/odbx.h0000644000175000017500000000163611425153451011764 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include opendbx-1.4.6/lib/odbx_iface.hpp0000644000175000017500000000516211425153451013451 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "lib/opendbx/api" #include #include #ifndef ODBX_IFACE_HPP #define ODBX_IFACE_HPP namespace OpenDBX { class Lob_Iface { public: virtual ~Lob_Iface() throw() {} virtual void close() throw( std::exception ) = 0; virtual ssize_t read( void* buffer, size_t buflen ) throw( std::exception ) = 0; virtual ssize_t write( void* buffer, size_t buflen ) throw( std::exception ) = 0; }; class Result_Iface { public: virtual ~Result_Iface() throw() {} virtual void finish() throw( std::exception ) = 0; virtual odbxres getResult( struct timeval* timeout, unsigned long chunk ) throw( std::exception ) = 0; virtual odbxrow getRow() throw( std::exception ) = 0; virtual uint64_t rowsAffected() throw( std::exception ) = 0; virtual unsigned long columnCount() throw( std::exception ) = 0; virtual unsigned long columnPos( const string& name ) throw( std::exception ) = 0; virtual const string columnName( unsigned long pos ) throw( std::exception ) = 0; virtual odbxtype columnType( unsigned long pos ) throw( std::exception ) = 0; virtual unsigned long fieldLength( unsigned long pos ) throw( std::exception ) = 0; virtual const char* fieldValue( unsigned long pos ) throw( std::exception ) = 0; virtual Lob_Iface* getLob( const char* value ) throw( std::exception ) = 0; }; class Stmt_Iface { public: virtual ~Stmt_Iface() throw() {}; virtual Result_Iface* execute() throw( std::exception ) = 0; // virtual void bind( const void* data, unsigned long size, size_t pos, int flags ) = 0; // virtual size_t count() = 0; }; class Conn_Iface { public: virtual ~Conn_Iface() throw() {}; virtual void finish() throw( std::exception ) = 0; virtual void bind( const char* database, const char* who, const char* cred, odbxbind method = ODBX_BIND_SIMPLE ) throw( std::exception ) = 0; virtual void unbind() throw( std::exception ) = 0; virtual bool getCapability( odbxcap cap ) throw( std::exception ) = 0; virtual void getOption( odbxopt option, void* value ) throw( std::exception ) = 0; virtual void setOption( odbxopt option, void* value ) throw( std::exception ) = 0; virtual string& escape( const char* from, unsigned long fromlen, string& to ) throw( std::exception ) = 0; virtual Stmt_Iface* create( const string& sql, Stmt::Type type ) throw( std::exception ) = 0; }; } // namespace #endif opendbx-1.4.6/lib/odbx_impl.cpp0000644000175000017500000003120411765207631013341 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbx_impl.hpp" #include "opendbx/api" #include "odbxdrv.h" #include #include #include /* * Private C++ OpenDBX library impementation */ namespace OpenDBX { /* * OpenDBX large object implementation */ Lob_Impl::Lob_Impl( odbx_result_t* result, const char* value ) throw( std::exception ) { int err; m_result = result; if( ( err = odbx_lo_open( result, &m_lo, value ) ) < 0 ) { throw Exception( string( odbx_error( m_result->handle, err ) ), err, odbx_error_type( m_result->handle, err ) ); } m_close = true; } Lob_Impl::~Lob_Impl() throw() { if( m_close ) { odbx_lo_close( m_lo ); } } void Lob_Impl::close() throw( std::exception ) { int err; if( ( err = odbx_lo_close( m_lo ) ) < 0 ) { throw Exception( string( odbx_error( m_result->handle, err ) ), err, odbx_error_type( m_result->handle, err ) ); } m_close = false; } ssize_t Lob_Impl::read( void* buffer, size_t buflen ) throw( std::exception ) { ssize_t err; if( ( err = odbx_lo_read( m_lo, buffer, buflen ) ) < 0 ) { throw Exception( string( odbx_error( m_result->handle, err ) ), err, odbx_error_type( m_result->handle, err ) ); } return err; } ssize_t Lob_Impl::write( void* buffer, size_t buflen ) throw( std::exception ) { ssize_t err; if( ( err = odbx_lo_write( m_lo, buffer, buflen ) ) < 0 ) { throw Exception( string( odbx_error( m_result->handle, err ) ), err, odbx_error_type( m_result->handle, err ) ); } return err; } /* * OpenDBX result implementation */ Result_Impl::Result_Impl( odbx_t* handle ) throw( std::exception ) { m_handle = handle; m_result = NULL; } Result_Impl::~Result_Impl() throw() { try { this->finish(); } catch( Exception& e ) {} } void Result_Impl::finish() throw( std::exception ) { odbxres res; do { if( ( res = this->getResult( NULL, 0 ) ) == ODBX_RES_TIMEOUT ) { throw Exception( string( odbx_error( m_handle, ODBX_ERR_RESULT ) ), ODBX_ERR_RESULT, odbx_error_type( m_handle, ODBX_ERR_RESULT ) ); } } while ( res != ODBX_RES_DONE ); } odbxres Result_Impl::getResult( struct timeval* timeout, unsigned long chunk ) throw( std::exception ) { int err; if( m_result != NULL ) { if( ( err = odbx_result_finish( m_result ) ) != ODBX_ERR_SUCCESS ) { m_result = NULL; throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } } if( ( err = odbx_result( m_handle, &m_result, timeout, chunk ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } m_pos.clear(); return (odbxres) err; } odbxrow Result_Impl::getRow() throw( std::exception ) { int err; if( ( err = odbx_row_fetch( m_result ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } return (odbxrow) err; } uint64_t Result_Impl::rowsAffected() throw( std::exception ) { return odbx_rows_affected( m_result ); } unsigned long Result_Impl::columnCount() throw( std::exception ) { return odbx_column_count( m_result ); } unsigned long Result_Impl::columnPos( const string& name ) throw( std::exception ) { map::const_iterator it; if( !m_pos.empty() ) { if( ( it = m_pos.find( name ) ) != m_pos.end() ) { return it->second; } throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } for( unsigned long i = 0; i < odbx_column_count( m_result ); i++ ) { m_pos[this->columnName( i )] = i; } if( ( it = m_pos.find( name ) ) != m_pos.end() ) { return it->second; } throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } const string Result_Impl::columnName( unsigned long pos ) throw( std::exception ) { if( pos < odbx_column_count( m_result ) ) { if( odbx_column_name( m_result, pos ) != NULL ) { return string( odbx_column_name( m_result, pos ) ); } return string(); } throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } odbxtype Result_Impl::columnType( unsigned long pos ) throw( std::exception ) { if( pos < odbx_column_count( m_result ) ) { return (odbxtype) odbx_column_type( m_result, pos ); } throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } unsigned long Result_Impl::fieldLength( unsigned long pos ) throw( std::exception ) { if( pos < odbx_column_count( m_result ) ) { return odbx_field_length( m_result, pos ); } throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } const char* Result_Impl::fieldValue( unsigned long pos ) throw( std::exception ) { if( pos < odbx_column_count( m_result ) ) { return odbx_field_value( m_result, pos ); } throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } Lob_Iface* Result_Impl::getLob( const char* value ) throw( std::exception ) { return new Lob_Impl( m_result, value ); } /* * OpenDBX Stmt implementation */ Stmt_Impl::Stmt_Impl( odbx_t* handle ) throw( std::exception ) { m_handle = handle; } odbx_t* Stmt_Impl::_getHandle() const throw() { return m_handle; } /* * OpenDBX StmtSimple implementation */ StmtSimple_Impl::StmtSimple_Impl( odbx_t* handle, const string& sql ) throw( std::exception ) : Stmt_Impl( handle ) { m_sql = sql; /* m_buffer = NULL; m_bufsize = 0; size_t pos = 0; while( ( pos = m_sql.find( "?", pos ) ) != string::npos ) { m_pos.push_back( pos ); pos += 1; } m_binds.resize( m_pos.size() ); m_flags.resize( m_pos.size() ); for( size_t i = 0; i < m_binds.size(); i++ ) { m_binds[i] = NULL; m_flags[i] = Stmt::None; }*/ } StmtSimple_Impl::StmtSimple_Impl() throw( std::exception ) : Stmt_Impl( NULL ) { // m_buffer = NULL; // m_bufsize = 0; } StmtSimple_Impl::~StmtSimple_Impl() throw() { // if( m_buffer != NULL ) { std::free( m_buffer ); } } // void StmtSimple_Impl::bind( const void* data, unsigned long size, size_t pos, int flags ) // { // if( pos >= m_pos.size() ) // { // throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); // } // // if( ( flags & Stmt::Null ) == 0 ) // { // m_binds[pos] = data; // m_bindsize[pos] = size; // } // m_flags[pos] = flags; // } // size_t StmtSimple_Impl::count() // { // return m_pos.size(); // } Result_Iface* StmtSimple_Impl::execute() throw( std::exception ) { // if( m_binds.size() ) { _exec_params(); } // else { _exec_noparams(); } this->_exec_noparams(); return new Result_Impl( this->_getHandle() ); } inline void StmtSimple_Impl::_exec_noparams() throw( std::exception ) { int err; if( ( err = odbx_query( this->_getHandle(), m_sql.c_str(), m_sql.size() ) ) < 0 ) { throw Exception( string( odbx_error( this->_getHandle(), err ) ), err, odbx_error_type( this->_getHandle(), err ) ); } } // inline void StmtSimple_Impl::_exec_params() // { // int err; // unsigned long esclen; // size_t i, sqlpos = 0, bufpos = 0, lastpos = 0, max = m_sql.size() + 1; // // for( i = 0; i < m_binds.size(); i++ ) // { // if( m_binds[i] != NULL ) { max += m_bindsize[i] * 2 + 2; } // else { max += 4; } // } // m_buffer = _resize( m_buffer, max ); // // for( i = 0; i < m_binds.size(); i++ ) // { // sqlpos = m_pos[i]; // // memcpy( m_buffer + bufpos, m_sql.c_str() + lastpos, sqlpos - lastpos ); // bufpos += sqlpos - lastpos; // lastpos = sqlpos + 1; // // if( m_binds[i] != NULL ) // { // if( ( m_flags[i] & Stmt::Quote ) > 0 ) { m_buffer[bufpos++] = '\''; } // esclen = max - bufpos; // // if( (err = odbx_escape( m_handle, (const char*) m_binds[i], m_bindsize[i], m_buffer + bufpos, &esclen ) ) < 0 ) // { // throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); // } // // bufpos += esclen; // if( ( m_flags[i] & Stmt::Quote ) != 0 ) { m_buffer[bufpos++] = '\''; } // } // else // { // memcpy( m_buffer + bufpos, "NULL", 4 ); // bufpos += 4; // } // // sqlpos += 1; // } // // memcpy( m_buffer + bufpos, m_sql.c_str() + lastpos, m_sql.size() - lastpos ); // bufpos += m_sql.size() - lastpos; // m_buffer[bufpos] = 0; // // if( ( err = odbx_query( m_handle, m_buffer, bufpos ) ) < 0 ) // { // throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); // } // } /* * OpenDBX connection implementation */ Conn_Impl::Conn_Impl( const char* backend, const char* host, const char* port ) throw( std::exception ) { int err; m_escbuf = _resize( NULL, 32 ); m_escsize = 32; if( ( err = odbx_init( &m_handle, backend, host, port ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } m_unbind = false; m_finish = true; } Conn_Impl::~Conn_Impl() throw() { if( m_unbind ) { odbx_unbind( m_handle ); } if( m_finish ) { odbx_finish( m_handle ); } if( m_escbuf != NULL ) { std::free( m_escbuf ); } } void Conn_Impl::bind( const char* database, const char* who, const char* cred, odbxbind method ) throw( std::exception ) { int err; if( ( err = odbx_bind( m_handle, database, who, cred, method ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } m_unbind = true; } void Conn_Impl::unbind() throw( std::exception ) { int err; if( ( err = odbx_unbind( m_handle ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } m_unbind = false; } void Conn_Impl::finish() throw( std::exception ) { int err; if( m_unbind ) { odbx_unbind( m_handle ); m_unbind = false; } if( ( err = odbx_finish( m_handle ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } m_finish = false; } bool Conn_Impl::getCapability( odbxcap cap ) throw( std::exception ) { int err = odbx_capabilities( m_handle, (unsigned int) cap ); switch( err ) { case ODBX_ENABLE: return true; case ODBX_DISABLE: return false; default: throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } } void Conn_Impl::getOption( odbxopt option, void* value ) throw( std::exception ) { int err; if( ( err = odbx_get_option( m_handle, option, value ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } } void Conn_Impl::setOption( odbxopt option, void* value ) throw( std::exception ) { int err; if( ( err = odbx_set_option( m_handle, option, value ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } } string& Conn_Impl::escape( const char* from, unsigned long fromlen, string& to ) throw( std::exception ) { int err; unsigned long size = m_escsize; while( fromlen * 2 + 1 > size ) { size = size * 2; } if( size > m_escsize ) { m_escbuf = _resize( m_escbuf, size ); m_escsize = size; } if( (err = odbx_escape( m_handle, from, fromlen, m_escbuf, &size ) ) < 0 ) { throw Exception( string( odbx_error( m_handle, err ) ), err, odbx_error_type( m_handle, err ) ); } to.assign( m_escbuf, size ); return to; } Stmt_Iface* Conn_Impl::create( const string& sql, Stmt::Type type ) throw( std::exception ) { switch( type ) { case Stmt::Simple: return new StmtSimple_Impl( m_handle, sql ); default: throw Exception( string( odbx_error( NULL, -ODBX_ERR_PARAM ) ), -ODBX_ERR_PARAM, odbx_error_type( NULL, -ODBX_ERR_PARAM ) ); } } inline char* Conn_Impl::_resize( char* buffer, size_t size ) throw( std::exception ) { if( ( buffer = (char*) std::realloc( buffer, size ) ) == NULL ) { throw Exception( string( odbx_error( m_handle, -ODBX_ERR_NOMEM ) ), -ODBX_ERR_NOMEM, odbx_error_type( m_handle, -ODBX_ERR_NOMEM ) ); } return buffer; } } // namespace opendbx-1.4.6/lib/odbx.c0000644000175000017500000002707711765207177012002 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "opendbx/api.h" #include "odbxdrv.h" #include "odbxlib.h" #include #include #include static const char* odbx_errmsg[] = { gettext_noop("Success"), gettext_noop("Backend error occured"), gettext_noop("Invalid capability"), gettext_noop("Invalid parameter"), gettext_noop("Out of memory"), gettext_noop("Incorrect size of allocated memory"), gettext_noop("Loading backend library failed"), gettext_noop("Operation is not available"), gettext_noop("Invalid option"), gettext_noop("Option is read only"), gettext_noop("Setting option failed"), gettext_noop("Waiting for result failed"), gettext_noop("Not supported"), gettext_noop("Invalid handle"), }; /* * ODBX basic operations */ int odbx_init( odbx_t** handle, const char* backend, const char* host, const char* port ) { int err; #ifdef ENABLE_NLS if( bindtextdomain( "opendbx", LOCALEDIR ) == NULL ) { return -ODBX_ERR_NOMEM; } #endif if( handle == NULL || backend == NULL ) { return -ODBX_ERR_PARAM; } if( ( *handle = malloc( sizeof( struct odbx_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*handle)->ops = NULL; (*handle)->backend = NULL; (*handle)->generic = NULL; (*handle)->aux = NULL; if( ( err = _odbx_lib_open( *handle, backend ) ) < 0 ) { free( *handle ); return err; } if( (*handle)->ops && (*handle)->ops->basic && (*handle)->ops->basic->init ) { if( ( err = (*handle)->ops->basic->init( *handle, host, port ) ) < 0 ) { _odbx_lib_close( *handle ); free( *handle ); *handle = NULL; } return err; } _odbx_lib_close( *handle ); free( *handle ); *handle = NULL; return -ODBX_ERR_NOOP; } int odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { if( database == NULL ) { return -ODBX_ERR_PARAM; } if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->bind != NULL ) { return handle->ops->basic->bind( handle, database, who, cred, method ); } return -ODBX_ERR_HANDLE; } /* Deprecated: odbx_bind_simple() */ int odbx_bind_simple( odbx_t* handle, const char* database, const char* username, const char* password ) { return odbx_bind( handle, database, username, password, ODBX_BIND_SIMPLE ); } int odbx_unbind( odbx_t* handle ) { if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->unbind != NULL ) { return handle->ops->basic->unbind( handle ); } return -ODBX_ERR_HANDLE; } int odbx_finish( odbx_t* handle ) { if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->finish != NULL ) { int err; if( ( err = handle->ops->basic->finish( handle ) ) < 0 ) { return err; } if( ( err = _odbx_lib_close( handle ) ) < 0 ) { return err; } handle->ops = NULL; free( handle ); return ODBX_ERR_SUCCESS; } return -ODBX_ERR_HANDLE; } int odbx_capabilities( odbx_t* handle, unsigned int cap ) { if( handle != NULL && handle->ops != NULL ) { switch( cap ) { case ODBX_CAP_BASIC: if( handle->ops->basic != NULL ) { return ODBX_ENABLE; } break; case ODBX_CAP_LO: if( handle->ops->lo != NULL ) { return ODBX_ENABLE; } break; } return ODBX_DISABLE; } return -ODBX_ERR_HANDLE; } int odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { if( value == NULL ) { return -ODBX_ERR_PARAM; } if( option == ODBX_OPT_LIB_VERSION ) { *(int*) value = LIBVERSION; return ODBX_ERR_SUCCESS; } if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->get_option != NULL ) { return handle->ops->basic->get_option( handle, option, value ); } return -ODBX_ERR_HANDLE; } int odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { if( value == NULL ) { return -ODBX_ERR_PARAM; } if( option == ODBX_OPT_LIB_VERSION ) { return -ODBX_ERR_OPTRO; } if( option == ODBX_OPT_TLS ) { switch( *((int* ) value) ) { case ODBX_TLS_NEVER: case ODBX_TLS_TRY: case ODBX_TLS_ALWAYS: break; default: return -ODBX_ERR_PARAM; } } if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->set_option != NULL ) { return handle->ops->basic->set_option( handle, option, value ); } return -ODBX_ERR_HANDLE; } const char* odbx_error( odbx_t* handle, int error ) { if( error == -ODBX_ERR_BACKEND ) { if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->error != NULL ) { return handle->ops->basic->error( handle ); } return dgettext( "opendbx", odbx_errmsg[ODBX_ERR_HANDLE] ); } if( error <= ODBX_ERR_SUCCESS && error >= -ODBX_MAX_ERRNO ) { return dgettext( "opendbx", odbx_errmsg[-error] ); } return dgettext( "opendbx", odbx_errmsg[ODBX_ERR_PARAM] ); } int odbx_error_type( odbx_t* handle, int error ) { if( error >= ODBX_ERR_SUCCESS ) { return 0; } switch( error ) { case -ODBX_ERR_BACKEND: if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->error_type != NULL ) { return handle->ops->basic->error_type( handle ); } case -ODBX_ERR_HANDLE: case -ODBX_ERR_NOMEM: case -ODBX_ERR_NOTEXIST: case -ODBX_ERR_NOOP: case -ODBX_ERR_RESULT: return -1; } return 1; } int odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ) { if( from != NULL && to != NULL && tolen != NULL ) { if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL ) { if( handle->ops->basic->escape ) { return handle->ops->basic->escape( handle, from, fromlen, to, tolen ); } unsigned long i, len = 0; for( i = 0; i < fromlen; i++ ) { if( i == *tolen - 1 ) { return -ODBX_ERR_SIZE; } switch( from[i] ) { // duplicate single quotes and backslashes for escaping case '\\': to[len++] = '\\'; break; case '\'': to[len++] = '\''; break; } to[len++] = from[i]; } to[len] = '\0'; *tolen = len; return ODBX_ERR_SUCCESS; } return -ODBX_ERR_HANDLE; } return -ODBX_ERR_PARAM; } int odbx_query( odbx_t* handle, const char* query, unsigned long length ) { if( query == NULL ) { return ODBX_ERR_PARAM; } if( length == 0 ) { length = (unsigned long) strlen( query ); } if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->query != NULL ) { return handle->ops->basic->query( handle, query, length ); } return -ODBX_ERR_HANDLE; } int odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { if( handle != NULL && handle->ops != NULL && handle->ops->basic != NULL && handle->ops->basic->result != NULL ) { int err; *result = NULL; if( ( err = handle->ops->basic->result( handle, result, timeout, chunk ) ) > ODBX_RES_TIMEOUT ) // for ODBX_RES_NOROWS and ODBX_RES_ROWS { if( *result ) { (*result)->handle = handle; } } else { *result = NULL; } return err; } return -ODBX_ERR_HANDLE; } int odbx_result_finish( odbx_result_t* result ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->result_finish != NULL && result->handle->ops->basic->row_fetch != NULL ) { while( result->handle->ops->basic->row_fetch( result ) == ODBX_ROW_NEXT ); return result->handle->ops->basic->result_finish( result ); } return -ODBX_ERR_HANDLE; } /* Depricated: odbx_result_free() */ void odbx_result_free( odbx_result_t* result ) { odbx_result_finish( result ); } int odbx_row_fetch( odbx_result_t* result ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->row_fetch != NULL ) { return result->handle->ops->basic->row_fetch( result ); } return -ODBX_ERR_HANDLE; } uint64_t odbx_rows_affected( odbx_result_t* result ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->rows_affected != NULL ) { return result->handle->ops->basic->rows_affected( result ); } return 0; } unsigned long odbx_column_count( odbx_result_t* result ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->column_count != NULL ) { return result->handle->ops->basic->column_count( result ); } return 0; } const char* odbx_column_name( odbx_result_t* result, unsigned long pos ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->column_name != NULL ) { return result->handle->ops->basic->column_name( result, pos ); } return NULL; } int odbx_column_type( odbx_result_t* result, unsigned long pos ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->column_type != NULL ) { return result->handle->ops->basic->column_type( result, pos ); } return -ODBX_ERR_HANDLE; } unsigned long odbx_field_length( odbx_result_t* result, unsigned long pos ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->field_length != NULL ) { return result->handle->ops->basic->field_length( result, pos ); } return 0; } const char* odbx_field_value( odbx_result_t* result, unsigned long pos ) { if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->basic != NULL && result->handle->ops->basic->field_value != NULL ) { return result->handle->ops->basic->field_value( result, pos ); } return NULL; } /* * ODBX large object operations */ int odbx_lo_open( odbx_result_t* result, odbx_lo_t** lo, const char* value ) { if( lo == NULL || value == NULL ) { return -ODBX_ERR_PARAM; } if( result != NULL && result->handle != NULL && result->handle->ops != NULL && result->handle->ops->lo != NULL && result->handle->ops->lo->open != NULL ) { return result->handle->ops->lo->open( result, lo, value ); } return -ODBX_ERR_HANDLE; } int odbx_lo_close( odbx_lo_t* lo ) { if( lo != NULL && lo->result != NULL && lo->result->handle != NULL && lo->result->handle->ops != NULL && lo->result->handle->ops->lo != NULL && lo->result->handle->ops->lo->close != NULL ) { return lo->result->handle->ops->lo->close( lo ); } return -ODBX_ERR_HANDLE; } ssize_t odbx_lo_read( odbx_lo_t* lo, void* buffer, size_t buflen ) { if( buffer == NULL ) { return -ODBX_ERR_PARAM; } if( lo != NULL && lo->result != NULL && lo->result->handle != NULL && lo->result->handle->ops != NULL && lo->result->handle->ops->lo != NULL && lo->result->handle->ops->lo->read != NULL ) { return lo->result->handle->ops->lo->read( lo, buffer, buflen ); } return -ODBX_ERR_HANDLE; } ssize_t odbx_lo_write( odbx_lo_t* lo, void* buffer, size_t buflen ) { if( buffer == NULL ) { return -ODBX_ERR_PARAM; } if( lo != NULL && lo->result != NULL && lo->result->handle != NULL && lo->result->handle->ops != NULL && lo->result->handle->ops->lo != NULL && lo->result->handle->ops->lo->write != NULL ) { return lo->result->handle->ops->lo->write( lo, buffer, buflen ); } return -ODBX_ERR_HANDLE; } opendbx-1.4.6/lib/odbxlib.c0000644000175000017500000001326411425153451012446 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbxlib.h" #include #include #if defined( ODBX_SINGLELIB ) #if defined( HAVE_LIBFBCLIENT ) || defined( HAVE_LIBGDS32 ) extern struct odbx_ops firebird_odbx_ops; #endif #if defined( HAVE_LIBSYBDB ) extern struct odbx_ops mssql_odbx_ops; #endif #if defined( HAVE_LIBMYSQLCLIENT_R ) || defined( HAVE_LIBMYSQLCLIENT ) || defined( HAVE_LIBMYSQL ) extern struct odbx_ops mysql_odbx_ops; #endif #if defined( HAVE_LIBODBC ) extern struct odbx_ops odbc_odbx_ops; #endif #if defined( HAVE_LIBCLNTSH ) extern struct odbx_ops oracle_odbx_ops; #endif #if defined( HAVE_LIBPQ ) extern struct odbx_ops pgsql_odbx_ops; #endif #if defined( HAVE_LIBSQLITE ) extern struct odbx_ops sqlite_odbx_ops; #endif #if defined( HAVE_LIBSQLITE3 ) extern struct odbx_ops sqlite3_odbx_ops; #endif #if defined( HAVE_LIBCT ) || defined( HAVE_LIBSYBCT_R ) || defined( HAVE_LIBSYBCT ) extern struct odbx_ops sybase_odbx_ops; #endif struct odbx_backend_syms { const char* name; struct odbx_ops* ops; }; struct odbx_backend_syms odbx_lib_ops[] = { #if defined( HAVE_LIBMYSQLCLIENT_R ) || defined( HAVE_LIBMYSQLCLIENT ) || defined( HAVE_LIBMYSQL ) { "mysql", &mysql_odbx_ops }, #endif #if defined( HAVE_LIBPQ ) { "pgsql", &pgsql_odbx_ops }, #endif #if defined( HAVE_LIBSQLITE3 ) { "sqlite3", &sqlite3_odbx_ops }, #endif #if defined( HAVE_LIBFBCLIENT ) || defined( HAVE_LIBGDS32 ) { "firebird", &firebird_odbx_ops }, #endif #if defined( HAVE_LIBODBC ) { "odbc", &odbc_odbx_ops }, #endif #if defined( HAVE_LIBCLNTSH ) { "oracle", &oracle_odbx_ops }, #endif #if defined( HAVE_LIBSYBDB ) { "mssql", &mssql_odbx_ops }, #endif #if defined( HAVE_LIBCT ) || defined( HAVE_LIBSYBCT_R ) || defined( HAVE_LIBSYBCT ) { "sybase", &sybase_odbx_ops }, #endif #if defined( HAVE_LIBSQLITE ) { "sqlite", &sqlite_odbx_ops }, #endif { NULL, NULL } }; int _odbx_lib_open( struct odbx_t* handle, const char* backend ) { struct odbx_backend_syms* current = odbx_lib_ops; while( current->name != NULL ) { if( strcmp( current->name, backend ) == 0 ) { handle->ops = current->ops; return ODBX_ERR_SUCCESS; } current++; } return -ODBX_ERR_NOTEXIST; } int _odbx_lib_close( struct odbx_t* handle ) { return ODBX_ERR_SUCCESS; } #elif defined( HAVE_LIBDL ) #ifdef HAVE_DLFCN_H #include #endif int _odbx_lib_open( struct odbx_t* handle, const char* backend ) { size_t len, plen; char lib[ODBX_PATHSIZE+1]; void (*odbxreg)(struct odbx_ops**); len = plen = snprintf( lib, ODBX_PATHSIZE, LIBPATH ); len += snprintf( lib + len, ODBX_PATHSIZE - len, "/" ); len += snprintf( lib + len, ODBX_PATHSIZE - len, LIBPREFIX ); len += snprintf( lib + len, ODBX_PATHSIZE - len, "%s", backend ); len += snprintf( lib + len, ODBX_PATHSIZE - len, "backend" ); len += snprintf( lib + len, ODBX_PATHSIZE - len, LIBSUFFIX ); if( len > ODBX_PATHSIZE ) { return -ODBX_ERR_SIZE; } lib[len] = '\0'; if( ( handle->backend = dlopen( backend, RTLD_LAZY ) ) == NULL ) { if( ( handle->backend = dlopen( lib + plen + 1, RTLD_LAZY ) ) == NULL ) { if( ( handle->backend = dlopen( lib, RTLD_LAZY ) ) == NULL ) { fprintf( stderr, dgettext( "opendbx", gettext_noop( "Loading backend library %s, %s or %s failed" ) ), backend, lib + plen + 1, lib ); fprintf( stderr, "\n%s\n", dlerror() ); return -ODBX_ERR_NOTEXIST; } } } if( ( *(void **) (&odbxreg) = dlsym( handle->backend, "odbxdrv_register" ) ) == NULL ) { return -ODBX_ERR_NOOP; } (*odbxreg)( &(handle->ops) ); return ODBX_ERR_SUCCESS; } int _odbx_lib_close( struct odbx_t* handle ) { if( dlclose( handle->backend ) != 0 ) { return ODBX_ERR_PARAM; } return ODBX_ERR_SUCCESS; } #elif defined( WIN32 ) #ifdef HAVE_WINDOWS_H #include #endif static int _odbx_lib_register( struct odbx_t* handle, const char* library ) { typedef void (WINAPI*regfunc)(struct odbx_ops**); regfunc odbxreg; if( ( handle->backend = (void*) LoadLibrary( library ) ) != NULL ) { if( ( odbxreg = (regfunc) GetProcAddress( (HMODULE) handle->backend, "odbxdrv_register" ) ) != NULL ) { odbxreg( &(handle->ops) ); return ODBX_ERR_SUCCESS; } FreeLibrary( (HMODULE) handle->backend ); return -ODBX_ERR_NOOP; } return -ODBX_ERR_NOTEXIST; } int _odbx_lib_open( struct odbx_t* handle, const char* backend ) { char lib[ODBX_PATHSIZE+1]; size_t len, plen; // SetDllDirectory( LIBPATH ) len = plen = snprintf( lib, ODBX_PATHSIZE, PACKAGE ); len += snprintf( lib + len, ODBX_PATHSIZE - len, "\\" ); len += snprintf( lib + len, ODBX_PATHSIZE - len, LIBPREFIX ); len += snprintf( lib + len, ODBX_PATHSIZE - len, "%s", backend ); len += snprintf( lib + len, ODBX_PATHSIZE - len, "backend" ); len += snprintf( lib + len, ODBX_PATHSIZE - len, LIBSUFFIX ); if( len > ODBX_PATHSIZE ) { return -ODBX_ERR_SIZE; } lib[len] = '\0'; if( _odbx_lib_register( handle, backend ) != ODBX_ERR_SUCCESS ) { if( _odbx_lib_register( handle, lib + plen + 1 ) != ODBX_ERR_SUCCESS ) { if( _odbx_lib_register( handle, lib ) != ODBX_ERR_SUCCESS ) { fprintf( stderr, dgettext( "opendbx", gettext_noop( "Loading backend library %s, %s or %s failed\n" ) ), backend, lib + plen + 1, lib ); return -ODBX_ERR_NOTEXIST; } } } return ODBX_ERR_SUCCESS; } int _odbx_lib_close( struct odbx_t* handle ) { if( FreeLibrary( (HMODULE) handle->backend ) != 0 ) { return ODBX_ERR_PARAM; } return ODBX_ERR_SUCCESS; } #else #error "Building shared libraries requires capabilities to load libraries dynamically" #endif opendbx-1.4.6/lib/opendbx/0000755000175000017500000000000011765214162012374 500000000000000opendbx-1.4.6/lib/opendbx/api0000644000175000017500000016440111425153451013012 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2009 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include #include #include #include #ifndef ODBX_API_HPP #define ODBX_API_HPP extern "C++" { /** * OpenDBX C++ API * * The OpenDBX C++ API is an object-oriented database abstraction layer based * on the procedural C API of the OpenDBX library. The C++ API provides objects * encapsulating connections, statements, result sets and large objects. * * Using the API starts with establishing a connection to the database server by * creating an instance of the Conn class with the parameters backend, host and * port. Conn::getCapability() tests the implemented capabilites of the underlying * database library while Conn::getOption() and Conn::setOption() has be used to * test for and change a number of options. The options must be changed before * authenticating the connection with the Conn::bind() method to have any effect. * It's also possible to rebind a connection using different credentials after * Conn::unbind() had been called. Additionally, the Conn class is able to * escape potentially dangerous character sequences with Conn::escape() if e.g. * user input should be part of a statement as value. * * The Conn::create() method creates and initializes a new statement instance * from a SQL string. Currently, there are only simple statement objects * implemented, which needs to be complete statements which can be sent to the * database with Stmt::execute(). This method returns a Result object * encapsulating one or more result sets returned by the database depending on * the statement sent. * * Each result set must be retrieved using Result::getResult(), while * Result::getRows() fetches a row from the current result set if the statement * was a SELECT like statement. Otherwise, Result::rowsAffected() can be used * to get the number of rows that were touched by the statement. If the statement * may return rows, the Result::columnName() and Result::columnType() methods * are able to provide some informations about the columns indexed from 0 to n. * It's also possible to map the column name with the Result::columnPos() method * to the column index which is required be the other column methods. To get * the actual value and length of the content in the current row at the given * position, the Result::fieldValue() and Result::fieldLength() must be called. * * In case the unterlying database library requires special handling of large * objects (binary or text LOBs), the value of Result::fieldValue() has to be * feed into the Result::getLob() method. It returns a Lob object which enables * the application to read from and write to a large object using Lob::read() * respectively Lob::write(). This is only necessary if the Conn::getCapability() * method returns true when asking for ODBX_CAP_LO. * * If an error occurs in any of the object methods, the objects will throw an * instance of the Exception class with extends the runtime_error exception of * the STL. The instance contains an error message, the OpenDBX error code and * an error type indicating the severity of the error. This information can be * retrieved by the methods Exception::what(), Exception::getCode() and * Exception::getType(). * * @author Norbert Sendetzky * @version 1.0 */ namespace OpenDBX { using std::string; class Lob_Iface; class Result_Iface; class Stmt_Iface; class Conn_Iface; /** * Exceptions thrown by the OpenDBX classes. * * Most calls to methods of OpenDBX objects does throw an exception in case * an error occurs in the underlying database library. Additionally to other * exceptions which inherit from the STL exception class it will not only * contain a translated error message depending on the user settings but * also a machine readable error code and an indicator for the severity of * the eror. * * @author Norbert Sendetzky * @version 1.0 */ class Exception : public std::runtime_error { /** * Error code (negative). */ int m_error; /** * Severity of error (negative: fatal, zero: success, positive: warning) */ int m_type; public: /** * Initializes the exception object. * * The first parameter, the error message, should be the human readable * description of what has gone wrong. It should also be already translated * to the language of the user which depends on his environment settings * when e.g GNU gettext is used. Errors thrown by the OpenDBX C++ library * are already translated. * * The OpenDBX error code is the machine readable code for the error which * has been occured. * * The last parameter must be a value indicating the severity of the * thrown error. If the value is smaller than zero, the error is fatal * and the connection to the database can't be recovered and has to be * closed and reopened before the application can try to continue. In * case it's greater than zero, the operation failed but the database * connection is still usable. Zero represents a successful operation * and shouldn't be used because an exception should only be thrown in * error conditions. * * @param msg Human readable error message * @param err OpenDBX error code * @param type Severity of error (negative: fatal, zero: success, positive: warning) * @return Exception */ Exception( const string& msg, int err, int type ) throw(); /** * Returns the OpenDBX error code related to the error. * * The machine readable code describing the error which occured can be * used by the application to act differently depending on the specific * error. Currently defined codes are: * * - ODBX_ERR_SUCCESS\n * The operation was successfully completed. * - ODBX_ERR_BACKEND\n * An error occured in the native database library or in the * database server. * - ODBX_ERR_NOCAP\n * The capability isn't available in the currently selected backend. * - ODBX_ERR_PARAM\n * One of the given parameters is invalid and doesn't match the * expectations. * - ODBX_ERR_NOMEM\n * An out of memory condition occured. * - ODBX_ERR_SIZE\n * The internally allocated memory is unable to store the value. * - ODBX_ERR_NOTEXIST\n * The backend library wasn't found or loading the library failed. * - ODBX_ERR_NOOP\n * The required function isn't available or the operation isn't * possible in this backend. * - ODBX_ERR_OPTION\n * The given option is unknown an therefore invalid. * - ODBX_ERR_OPTRO\n * The requested option is read-only and its value can't be changed. * - ODBX_ERR_OPTWR\n * Setting the given option to the new value failed. * - ODBX_ERR_RESULT\n * Waiting for the result set after sending a statement to the * database server failed. * - ODBX_ERR_NOTSUP\n * The requested functionality isn't supported by the backend. * - ODBX_ERR_HANDLE\n * The internal data structure which should store the details for * accessing the database are invalid. * * @return Error code */ int getCode() const throw(); /** * Returns severity indicator. * * The returned value classifies the error thrown. In case it is negative, * the error is fatal (e.g. the connection to the database is lost) and * the application can't continue without closing and reopening the * connection. * * If the value is positive, the database wasn't able to perform the * requested action but the connection is still OK and can be used to * send more requests to the database. * On zero, everything was successfull and no error occured. This * shouldn't happen when catching one of these exceptions. * * @return Severity of error (negative: fatal, zero: success, positive: warning) */ int getType() const throw(); }; /** * Handling large objects if supported by the database. * * @author Norbert Sendetzky * @version 1.0 */ class Lob { friend class Result; /** * Private implementation of object. */ Lob_Iface* m_impl; /** * Reference counter of copies. */ int* m_ref; protected: /** * Default constructor. * * The default constructor isn't part of the public interface as the * object must not be created manually. Instead, the Result::getLob() * method is a factory for instances of the large object class. * * @return Lob instance */ Lob() throw() {}; /** * Create large object instance. * * The constructor isn't part of the public interface as the object must * not be created manually. Instead, the Result::getLob() method is a * factory for instances of the large object class. * * @param impl Pointer to private implementation * @return Lob instance * @throws std::exception If an error occures */ Lob( Lob_Iface* impl ) throw( std::exception ); public: /** * Destroy large object instance if no other references exist. * * Each large object uses a reference counter to remember if the * internal variables are shared with other objects. If this isn't the * case or if this object is the last one referencing the variables, * the object is cleanup up and the allocated memory freed. */ ~Lob() throw(); /** * Copy constructor. * * Enables the transfer of the internal state of an object \a ref of the same * type to this object. Both objects share the same variables * and the reference counter afterwards. The reference counter is * incremented each time an object is copied and will be decremented if * it is destroyed. * * @param ref Original large object instance */ Lob( const Lob& ref ) throw(); /** * Assign large object instance to another one. * * Assigns the internal state of an object \a ref of the same type to this * object. Both objects share the same variables and the * reference counter afterwards. The reference counter is incremented * each time an object is copied and will be decremented if it is * destroyed. * * @param ref Large object instance * @return Large object reference of this instance */ Lob& operator=( const Lob& ref ) throw(); /** * Closes the large object and commits the changes. * * After reading from or writing new content into the large object, it * should be closed to commit changes to the disk and clean up the * resources. If this isn't done, the destructor of the object tries to * close the large object automatically, but there's no guarantee it * was successful as the destructor doesn't throw an exception in case * of an error. Therefore, it's highly recommended to call this method * once when you don't need the object any more. * * @throws OpenDBX::Exception If the underlying database library returns an error */ void close() throw( std::exception ); /** * Reads content from large object into the buffer. * * To get the content of a large object, this method fetches the data * in one or more pieces from the server and stores it into the user * supplied buffer. The first call to read() will return the bytes from * the beginning. The second and all other calls will store subsequent * parts of the large object content into the buffer until the end of * the data is reached. To reread the content a second time, you have * to close the large object handle and reopen it again as some databases * provide no way to reposition the internal file position indicator for * the stream. The large object content fetched from the server is * stored into the user supplied \a buffer up to \a buflen bytes. * * The method returns the number of bytes placed into \a buffer, which may * be up to \a buflen bytes. If the end of the content is reached and no * more data is available, the return value will be 0 (zero). * * @param buffer Pointer to a byte array where the data should be written to * @param buflen Length of the given buffer in bytes * @return Number of bytes written into the buffer * @throws OpenDBX::Exception If the underlying database library returns an error */ ssize_t read( void* buffer, size_t buflen ) throw( std::exception ); /** * Writes data from the buffer into the large object. * * It sends the data supplied in buffer to the server for storing it * inside the large object. The function can be called more than once * to add subsequent parts of the content to the object. If it isn't a * new or empty object, the existing data will be overwritten and * truncated to the new size. It's not possible to update only parts of * the content as some databases doesn't support to position the * internal file position indicator. The data which should be send to * the server is read from \a buffer up to \a buflen bytes. * *The method returns the number of bytes read from \a buffer and sent to * the database server, which may be up to \a buflen bytes. It isn't * guaranteed that the complete chunk was sent to the server, so the * returned size may be less than the value in \a buflen. * * @param buffer Pointer to a byte array where the content is stored * @param buflen Length of the data in the buffer in bytes * @return Number of bytes written into the large object * @throws OpenDBX::Exception If the underlying database library returns an error */ ssize_t write( void* buffer, size_t buflen ) throw( std::exception ); }; /** * Provides result sets from the database. * * @author Norbert Sendetzky * @version 1.0 */ class Result { friend class Stmt; /** * Private implementation of object. */ Result_Iface* m_impl; /** * Reference counter of copies. */ int* m_ref; protected: /** * Default constructor. * * The default constructor isn't part of the public interface as the * object must not be created manually. Instead, the Stmt::execute() * method is a factory for instances of the Result class. * * @return Result instance */ Result() throw() {}; /** * Creates a Result instance. * * The constructor isn't part of the public interface as the object must * not be created manually. Instead, the Stmt::execute() method is a * factory for instances of the Result class. * * @param impl Pointer to private implementation * @throws std::exception If an error occures * @return Result instance */ Result( Result_Iface* impl ) throw( std::exception ); public: /** * Destroys a Result instance if no other references exist. * * Each result object uses a reference counter to remember if the * internal variables are shared with other objects. If this isn't the * case or if this object is the last one referencing the variables, * the object is cleanup up and the allocated memory freed. */ ~Result() throw(); /** * Copy constructor. * * Enables the transfer of the internal state of an object \a ref of the same * type to this object. Both objects share the same variables * and the reference counter afterwards. The reference counter is * incremented each time an object is copied and will be decremented if * it is destroyed. * * @param ref Original result object instance */ Result( const Result& ref ) throw(); /** * Assigns a Result instance to another one. * * Assigns the internal state of an object \a ref of the same type to this * object. Both objects share the same variables and the * reference counter afterwards. The reference counter is incremented * each time an object is copied and will be decremented if it is * destroyed. * * @param ref Result instance * @return Result reference of this instance */ Result& operator=( const Result& ref ) throw(); /** * Retrieves unfetched rows and cleans up the available result sets. * * After executing a statement, at least one result set is returned by * the database server. In case of data manipulation statements, there * are no rows returned but you have to clean up the result set * nevertheless. This is usually done by calling and getResult() in a loop * until it returns "done". In order to simplify application development, * the finish() method does this for you. * * @throws OpenDBX::Exception If the underlying database library returns an error */ void finish() throw( std::exception ); /** * Fetches one result set from the database server. * * Retrieves the result of a query statement from the database server. * If the statement was an INSERT, UPDATE, DELETE or a similar * statement, the number of affected rows is available via rowsAffected(). * * The \a timeout parameter restricts the time the function is waiting for * a result form the server. It may be NULL to wait until a result * arrives. Otherwise, it can contain any number of seconds and * microseconds in a timeval structure to wait for. The timeval structure * must be set each time before calling getResult() because its content * may get changed by the function. If the server doesn't respond within * the timeout, the query isn't canceled! Instead, the next call to this * function will wait for the same result set. Waiting the specified time * may be implemented in the backends if it is possible, but there is no * guarantee. If not, getResult() will return not before a responds * arrives. * * Dependent on the native database library, it may be possible to * retrieve all rows at once (if chunk is zero), one by one or more than * one row at once. All positive values including zero are allowed as * values for \a chunk If paging (more than one row at once) is not * supported by the backend, it will use "one by one" or "all at once" * if this is the only option provided. * * getResult() returns ODBX_RES_ROWS if a result set is available and * ODBX_RES_DONE if no more results will be returned by the last * successful query. ODBX_RES_NOROWS is returned if the statement was * executed successfully but will not return a results set (like for * INSERT, UPDATE and DELETE statements) and ODBX_RES_TIMEOUT indicates * a timeout. * * @param timeout Pointer to a timeval struct specifying how long to wait for a result set from the database server * @param chunk Number of rows to fetch at once from the database server (zero means all rows at once) * @return Status or error code * @throws OpenDBX::Exception If the underlying database library returns an error * @see odbxres */ odbxres getResult( struct timeval* timeout = NULL, unsigned long chunk = 0 ) throw( std::exception ); /** * Makes data of next row available. * * Retrieves the values of a row from the current result set returned * by getResult(). Until this function is invoked, no row and field data * is available via fieldLength() or fieldValue() and these functions * will throw an exception. * * getRow() will return ODBX_ROW_NEXT as long as rows are available * from the result set. After the last row has been made available, * further calls to this function will return ODBX_ROW_DONE indicating * that the result set doesn't contain more rows. * * @return Status of the attempt to fetch one more row * @throws OpenDBX::Exception If the underlying database library returns an error */ odbxrow getRow() throw( std::exception ); /** * Returns the number of rows affected by DELETE, INSERT of UPDATE statements. * * Returns the number of rows that have been changed by the current * statement whose result set was retrieved by getResult() and zero * if the database server didn't alter any rows. Affected rows are only * returned for DELETE, INSERT or UPDATE statements and their concrete * number depends on the database implementation. Some database server * like MySQL may return a lower number than expected because they * doesn't modify records whose values wouldn't change. * * @return Number of rows touched * @throws OpenDBX::Exception If the underlying database library returns an error */ uint64_t rowsAffected() throw( std::exception ); /** * Returns the number of columns available in this result set. * * The number of columns will never change within a result set with one * notable exception: MySQL returns all outstanding rows of a previous * result set first if they were not fetched completely by getRow() * before. Therefore, the column count might change in this special * situation. * * @return Number of columns * @throws OpenDBX::Exception If the underlying database library returns an error */ unsigned long columnCount() throw( std::exception ); /** * Maps the column name to the column number required by other methods. * * This method returns the index of the column which is named like the * content of the string given via the parameter \a name. The column index will * not change within the result set. * * @param name Name of the column in the result set * @return Position of column in result set * @throws OpenDBX::Exception If the underlying database library returns an error */ unsigned long columnPos( const string& name ) throw( std::exception ); /** * Returns the name of the column in the current result set. * * Gets the name of the column specified by \a pos in the current result * set. The column names will not change within the result set with the * exception of MySQL when the first result set wasn't retrieved * completely before getResult() was called again. * * @param pos Position of column in result set * @return Column name * @throws OpenDBX::Exception If the underlying database library returns an error */ const string columnName( unsigned long pos ) throw( std::exception ); /** * Returns the type of the column in the current result set. * * The column type applies to all fields at the same position of the * rows fetched via getRow(). The definitions are based on the SQL2003 * standard and the data types of the database server have to comply to * the specification of the standard. These are: * * Exact numeric values: * - ODBX_TYPE_BOOLEAN: True/false values * - ODBX_TYPE_SMALLINT: Signed 16 bit integer * - ODBX_TYPE_INTEGER: Signed 32 bit integer * - ODBX_TYPE_BIGINT: Signed 64 bit integer * - ODBX_TYPE_DECIMAL: Exact signed numeric values with user defined precision * * Approximate numeric values: * - ODBX_TYPE_REAL: Approximate numeric values (signed) with 32 bit precision * - ODBX_TYPE_DOUBLE: Approximate numeric values (signed) with 64 bit precision * - ODBX_TYPE_FLOAT: Approximate numeric values (signed) with user defined precision * * String values: * - ODBX_TYPE_CHAR: Fixed number of characters * - ODBX_TYPE_NCHAR: Fixed number of characters using a national character set * - ODBX_TYPE_VARCHAR: Variable number of characters * - ODBX_TYPE_NVARCHAR: Variable number of characters using a national character set * * Large objects: * - ODBX_TYPE_CLOB: Large text object * - ODBX_TYPE_NCLOB: Large text object using a national character set * - ODBX_TYPE_XML: XML tree in text format * - ODBX_TYPE_BLOB: Large binary object * * Date and time values: * - ODBX_TYPE_TIME: Time including hours, minutes and seconds * - ODBX_TYPE_TIME_TZ: Time with timezone information * - ODBX_TYPE_TIMESTAMP: Date and time * - ODBX_TYPE_TIMESTAMP_TZ: Date and time with timezone information * - ODBX_TYPE_DATE: Date including year, month and day * - ODBX_TYPE_INTERVAL: Date interval * * Arrays and sets: * - ODBX_TYPE_ARRAY: Array of values * - ODBX_TYPE_MULTISET: Associative arrays * * External links: * - ODBX_TYPE_DATALINK: URI locators like URL links * * Data types provided by database implementations which are not covered * by the SQL2003 standard are subsumed as ODBX_TYPE_UNKNOWN. * * @param pos Position of column in result set * @return Column type * @throws OpenDBX::Exception If the underlying database library returns an error * @see odbxtype */ odbxtype columnType( unsigned long pos ) throw( std::exception ); /** * Returns the size of the content in the current row at the specified postion. * * The field is part of the current row which was retrieved by the * latest call to getRow() and is specified by the column index given by * \a pos. * * @param pos Position of column in result set * @return Size of the data in bytes * @throws OpenDBX::Exception If the underlying database library returns an error */ unsigned long fieldLength( unsigned long pos ) throw( std::exception ); /** * Returns a pointer to the content in the current row at the specified postion. * * This function returns a pointer to the field data specified by the * column index \a pos. The field is part of the current row which was * retrieved by the latest call to getRow(). All values except binary * objects are handed back as strings terminated by the zero character. * This does also apply to numeric values, dates, etc. They have to be * converted to their binary machine dependent representation before * arithmetic operations can be done. If a value is undefined, i.e. * "NULL" is attached to the field in the database, an equivalent NULL * pointer is returned. * * @param pos Position of column in result set * @return Pointer to the data * @throws OpenDBX::Exception If the underlying database library returns an error */ const char* fieldValue( unsigned long pos ) throw( std::exception ); /** * Creates a large object instance if supported by the database. * * Returns a Lob class instance representing a large object stored in * the database. It references the large object and provided methods for * accessing and modifying its content. * * The parameter required by this method must be the value returned by * the fieldValue() method of a large object column. * * This method must only be used if the underlying driver states that it * supports large objects via the Conn::getCapabilities(). Otherwise, * the content can be retrieved directly by the fieldValue() method. * * @param value Pointer to the content of a field returned by fieldValue() * @return Large object instance * @throws OpenDBX::Exception If the underlying database library returns an error * @see Lob */ Lob getLob( const char* value ) throw( std::exception ); }; /** * Statement object. * * @author Norbert Sendetzky * @version 1.0 */ class Stmt { friend class Conn; /** * Private implementation of object. */ Stmt_Iface* m_impl; /** * Reference counter of copies. */ int* m_ref; protected: /** * Default constructor. * * The default constructor isn't part of the public interface as the * object must not be created manually. Instead, the Conn::create() * method is a factory for instances of the Stmt class. * * @return Statement instance */ Stmt() throw() {}; /** * Creates a statement instance. * * The constructor isn't part of the public interface as the object must * not be created manually. Instead, the Conn::create() method is a * factory for instances of the Stmt class. * * @param impl Pointer to private implementation * @throws std::exception If an error occures * @return Statement instance */ Stmt( Stmt_Iface* impl ) throw( std::exception ); public: /** * Statement objects which can be created. * * Currently, only simple processing of statements is supported which * means that the statement sent to the database server consists of the * statement and the parameters in text form. Later on, also prepared * statements will be available which separates parsing and execution * with different parameters. */ enum Type { Simple }; /** * Destroys the statement instance if no other references exist. * * Each statement object uses a reference counter to remember if the * internal variables are shared with other objects. If this isn't the * case or if this object is the last one referencing the variables, * the object is cleaned up and the allocated memory freed. */ ~Stmt() throw(); /** * Copy constructor. * * Enables the transfer of the internal state of an object \a ref of the same * type to this object. Both objects share the same variables * and the reference counter afterwards. The reference counter is * incremented each time an object is copied and will be decremented if * it is destroyed. * * @param ref Original statement object instance */ Stmt( const Stmt& ref ) throw(); /** * Assigns a statement instance to another one. * * Assigns the internal state of an object \a ref of the same type to this * object. Both objects share the same variables and the * reference counter afterwards. The reference counter is incremented * each time an object is copied and will be decremented if it is * destroyed. * * @param ref Stmt instance * @return Statement reference of this instance */ Stmt& operator=( const Stmt& ref ) throw(); /** * Executes a statement and returns a Result instance. * * Sends the necessary data to the database server which will execute * the statement and return one or more result sets afterwards. The * result sets can be fetched via the returned Result object. * * @return Result instance * @throws OpenDBX::Exception If the underlying database library returns an error * @see Result */ Result execute() throw( std::exception ); }; /** * Encapsulates a connection to a database. * * @author Norbert Sendetzky * @version 1.0 */ class Conn { /** * Private implementation of the connection object. */ Conn_Iface* m_impl; /** * Reference counter of copies. */ int* m_ref; public: /** * The default constructor for newly created connection objects without * parameters. * * This is method is provided to enable programmers to use connection * objects as member variables of other classes. They are initialized * at construction time of the encapsulating object when no values * for backend, host and port are available yet. * * It's necessary to replace the created object later on by a connection * instance where the necessary parameters have been given via one of * the other constructors. Calling one of the member functions of an * instance created by the default constructor isn't possible and will * throw an exception. * * @return Empty connection instance * @see #Conn( const char*, const char*, const char* ) * @see #Conn( const string&, const string&, const string& ) */ Conn() throw(); /** * Creates a connection object using C style string parameters. * * Initializes a new connection using the parameters \a backend, \a host and * \a port, but doesn't open the connection to the database yet. This method * allows C style strings as values for all parameters. Another constructor * for C++ style strings is also available. It returns a new connection * instance, which can be used to query options implemented by the driver * or to create a statement. In case of an error, it throws an OpenDBX * exception with error message, code and severity. * * The parameter \a backend is the name of the driver the OpenDBX library * should use to connect to a database. The name must be one of the * implemented and available drivers on the system and is case sensitive. * All driver names are in lower case, e.g. "mysql". * * Depending on the database driver, \a host can have different meanings. * Normally, it's the name or IP address of the server hosting the * database server application. In case of serverless database * implementations like SQLite it's the directory path where the database * file is located. The path must contain the platform specific path * separators like slash ("/") on Unix-like systems and backslash ("\") * on Windows systems. Also the path must end with the path separator * like "/path/to/file/". * * Furthermore \a port can be the number or name the database server * application is listening to. If a name instead of the number is * allowed depends on the database client library but the number as * string does always work. If an empty string is given, the default * port of the database server application is used by the database * client library. * * @param backend Name of the backend module to use * @param host Name or IP address of the database server * @param port Name or number of the port used by the database server * @return Connection instance * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error * @see #Conn( const string&, const string&, const string& ) */ Conn( const char* backend, const char* host = "", const char* port = "" ) throw( std::exception ); /** * Creates a connection object using C++ style string parameters. * * Initializes a new connection using the parameters backend, host and * port, but doesn't open the connection to the database yet. This method * allows C++ style strings as values for all parameters. Another * construtor for C style strings is also available. It returns a new * connection instance, which can be used to query options implemented * by the driver or to create a statement. In case of an error, it throws * an OpenDBX exception with error message, code and severity. * * The parameter \a backend is the name of the driver the OpenDBX library * should use to connect to a database. The name must be one of the * implemented and available drivers on the system and is case sensitive. * All driver names are in lower case, e.g. "mysql". * * Depending on the database driver, \a host can have different mearings. * Normally, it's the name or IP address of the server hosting the * database server application. In case of serverless database * implementations like SQLite it's the directory path where the database * file is located. The path must contain the platform specific path * separators like slash ("/") on Unix-like systems and backslash ("\") * on Windows systems. Also the path must end with the path separator * like "/path/to/file/". * * Furthermore \a port can be the number or name the database server * application is listening to. If a name instead of the number is * allowed depends on the database client library but the number as * string does always work. If an empty string is given, the default * port of the database server application is used by the database * client library. * * @param backend Name of the backend module to use * @param host Name or IP address of the database server * @param port Name or number of the port used by the database server * @return Connection instance * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error * @see #Conn( const char*, const char*, const char* ) */ Conn( const string& backend, const string& host = "", const string& port = "" ) throw( std::exception ); /** * Destroys the connection instance if no other references exist. * * Each connection object uses a reference counter to remember if the * connection is shared with other objects. If this isn't the case or * if this object is the last one referencing the connection, the * connection is closed and the allocated memory is freed. */ ~Conn() throw(); /** * Copy constructor. * * Enables the transfer of the internal state of an object \a ref of the same * type to this object. Both objects share the same database connection * and the reference counter afterwards. The reference counter is * incremented each time an object is copied and will be decremented if * it is destroyed. * * @param ref Original connection object instance */ Conn( const Conn& ref ) throw(); /** * Assigns a connection instance to another one. * * Assigns the internal state of an object \a ref of the same type to this * object. Both objects share the same database connection and the * reference counter afterwards. The reference counter is incremented * each time an object is copied and will be decremented if it is * destroyed. * * @param ref Connection instance * @return Connection reference of this instance */ Conn& operator=( const Conn& ref ) throw(); /** * Authenticates the user and selects the database using C style string * parameters. * * After initializing the object instance with one of the constructors * taking a backend, host and port string as parameter, it's necessary * to authenticate the user and select a database. Depending on the * database client library, it also establishes the connection to the * database server. This method accepts C style strings for the database * name, the user name and the password. * * The first parameter, the name of the database will be used to select * the database all further commands are operating on. The database is * the container for the tables, views, etc., which store the records * and provide access to them. * * Authentication is done in most cases by a combination of a user name * and a password. If the user name is known by the database server and * the supplied password matches with the stored one, the database * server will allow the user to operate on the selected database and * its tables provided the user has permissions to read and/or modify * the content. * * The \a method parameter can be used to select different methods of * authentication. At the moment, only simple authentication * (ODBX_BIND_SIMPLE) with user name and password is available. * * @param database Name of the database managed by the database server * @param who Name of the user account known by the database server * @param cred Necessary credential which belongs to the user account * @param method Method used for authentication * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ void bind( const char* database, const char* who = "", const char* cred = "", odbxbind method = ODBX_BIND_SIMPLE ) throw( std::exception ); /** * Authenticates the user and selects the database using C++ style string * parameters. * * After initializing the object instance with one of the constructors * taking a backend, host and port string as parameter, it's necessary * to authenticate the user and select a database. Depending on the * database client library, it also establishes the connection to the * database server. This method accepts C++ style strings for the * database name, the user name and the password. * * The first parameter, the name of the database will be used to select * the database all further commands are operating on. The database is * the container for the tables, views, etc., which store the records * and provide access to them. * * Authentication is done in most cases by a combination of a user name * and a password. If the user name is known by the database server and * the supplied password matches with the stored one, the database * server will allow the user to operate on the selected database and * its tables provided the user has permissions to read and/or modify * the content. * * The \a method parameter can be used to select different methods of * authentication. At the moment, only simple authentication * (ODBX_BIND_SIMPLE) with user name and password is available. * * @param database Name of the database managed by the database server * @param who Name of the user account known by the database server * @param cred Necessary credential which belongs to the user account * @param method Method used for authentication * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ void bind( const string& database, const string& who = "", const string& cred = "", odbxbind method = ODBX_BIND_SIMPLE ) throw( std::exception ); /** * Releases the connection to the database and resets the authentication * status. * * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ void unbind() throw( std::exception ); /** * Cleans up the connection object. * * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ void finish() throw( std::exception ); /** * Tests if the database driver module does understand certain extensions. * * The OpenDBX library consists of a basic set of functions that must be * implemented by all drivers and optional sets for additional * functionality. This method allows an application to ask the driver * selected by the first parameter of the constructor of this object if * it supports one or more optional sets. The available sets and its * constants are: * * - ODBX_CAP_BASIC\n * The core function set which have to be implemented by all backends. * It consists of all functions necessary to connect to, send textual * queries to and process simple results returned from the database * server as well as error handling functions. * - ODBX_CAP_LO\n * The function set for handling large objects whose content isn't * accessible by the basic function. Currently, Firebird/Interbase * and Oracle requires using the LOB functions. * * The basic set makes sure that all drivers can handle connections to * the databases, send statements and retrieve results. It's supported * by all drivers and usually don't have to be checked. * * Some databases client libraries provide the content of large objects * not via the basic functions. Instead, the Result::fieldValue() method * returns only a handle to the large object and reading or modifying * the content of this data object requires calling additional methods. * * @param cap Constant of the capability * @return True if supported, false if not * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ bool getCapability( odbxcap cap ) throw( std::exception ); /** * Gets the value of a certain option provided by the database driver module. * * It asks the backend module for implemented options and their current * values. This function can be used at every stage and its primary use * is to find out supported features of the backend module. This features * can be enable with setOption() before the connection to the database * server is established by calling bind(). * * There are several option values defined as named constants in the * opendbx/api.h header file. A few of them are for informational purpose * only while most of the options can also be set to different values * by setOption() to change the behavior of the backend module. These * options are: * * - ODBX_OPT_API_VERSION\n * The API version implemented by the backend. It returns a five digit * number representing the API version of the backend module in the * form XYYZZ where X is the major number, YY the revision and ZZ the * minor number of the API. * - ODBX_OPT_THREAD_SAFE\n * If it is safe to use this backend and especially the native database * client library in an application which uses threads where more than * one thread opens database connections via the OpenDBX library. * - ODBX_OPT_TLS\n * The database client library may support transmitting all data * securely by encrypting the network traffic via SSL or TLS. * - ODBX_OPT_MULTI_STATEMENTS\n * The database server may be able to support multiple SQL statements * in one string sent to the database. * - ODBX_OPT_PAGED_RESULTS\n * All database servers and client libraries are able to transfer the * records row by row. Some of them can also transfer multiple rows * or even all at once to minimize server load, network traffic and * latency. The downside of this is an increased memory consumption. * - ODBX_OPT_COMPRESS\n * Support of compressed network traffic between database client and * server. This can lead to higher throughput if the network is the * bottleneck. * - ODBX_OPT_MODE\n * Some database servers support different modes of operation, e.g. * modes for compliance to other SQL implementations or completely * different query languages. * * The parameter \a value must be a pointer to an integer variable where * the backend module will store the result for the supplied option. If * it's not stated otherwise, the value assigned to the this parameter * will be of boolean nature and therefore is ODBX_ENABLE for a supported * option or ODBX_DISABLE for an option which isn't supported. * * @param option Constant of the option * @param value Pointer to memory where the result is stored * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ void getOption( odbxopt option, void* value ) throw( std::exception ); /** * Sets a certain option provided by the database driver module. * * Changes the value of the specified option in the backend module or * the native database library. Before trying to set an option, it should * be tested with getOption() first to ensure that it is supported by * the backend. Almost all options need to be set before connecting to * the database server using bind() to take any effect. * * There are several option values defined as named constants in the * opendbx/api.h header file. The possible options are: * * - ODBX_OPT_TLS\n * Use encryption to transmit all data securely over the network via * SSL or TLS. This option can be set to ODBX_TLS_NEVER (the default * value) to prevent encrpytion, ODBX_TLS_ALWAYS to enforce encryption * and to fail if it can't be used between the client library and the * server or ODBX_TLS_TRY to use encryption if possible with the * option to fall back to a connection which isn't encrypted. * - ODBX_OPT_MULTI_STATEMENTS\n * Enables the database server to accept multiple statements in one * string to the database if the value of value is set to ODBX_ENABLE. * Although, it might be possible to disable it by setting it to * ODBX_DISABLE. * - ODBX_OPT_PAGED_RESULTS\n * All database servers and client libraries are able to transfer the * records row by row. Some of them can also transfer multiple rows * or even all at once to minimize server load, network traffic and * latency. The downside of this is an increased memory consumption. * If paged results are supported by the backend, passing positive * values will fetch the specified number of records at once from the * database server. The value of zero ("0") is special in this case * because it asks the backend module to retrieve all records at once. * - ODBX_OPT_COMPRESS\n * Enable compressed network traffic between database client and * server. This can maximize the throughput if the network is the * bottleneck. Pass an integer variable with ODBX_ENABLE to enable * compression or with ODBX_DISABLE to disable it for this connection. * - ODBX_OPT_MODE\n * Some database servers support different modes of operation, e.g. * modes for compliance to other SQL implementations or completely * different query languages. The value for this option must point to * a zero terminated string. * * If not stated otherwise, the type of the variable passed to the second * parameter named \a value must be an integer pointer. Its values * must be in the range specified by the option being changed. * * @param option Constant of the option * @param value Pointer to memory which contains the new value * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ void setOption( odbxopt option, void* value ) throw( std::exception ); /** * Escapes potentially dangerous characters in user input using a C style buffer. * * For preventing SQL injection attacks which can have desasterous * effects, all text input that will be part of an SQL statement must be * escaped. This does also apply to user content that is already stored * in the database and should be copied to another record or stored * again as the escaping is removed before the database server writes * the content to disk. * * The first parameter must contain the character sequence that should * be escaped as C style string. This string itself won't be modified * by this method. * * The escaped string will be written to the third parameter named * \a to, which have to be also an C++ style string. After transforming * the input to an escaped string, the result may be more then twice * the size of the original input. The additional escape sequences * aren't stored in the database column so only the original string will * be written to the disk. * * A C++ reference of the third parameter containing the escaped string * afterwards is also returned by this method to providing the possibility * to write more elegant code. * * @param from Input string with which may contain dangerous characters * @param fromlen Size of the input string to escape in bytes * @param to String instance where the escaped characters should be written to * @return Reference to the second parameter containing the escaped characters * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ string& escape( const char* from, unsigned long fromlen, string& to ) throw( std::exception ); /** * Escapes potentially dangerous characters in user input using a C++ * style string parameter. * * For preventing SQL injection attacks which can have desasterous * effects, all text input that will be part of an SQL statement must be * escaped. This does also apply to user content that is already stored * in the database and should be copied to another record or stored * again as the escaping is removed before the database server writes * the content to disk. * * The first parameter must contain the character sequence that should * be escaped as C++ style string. This string itself won't be modified * by this method. * * The escaped string will be written to the third parameter named * \a to, which have to be also an C++ style string. After transforming * the input to an escaped string, the result may be more then twice * the size of the original input. The additional escape sequences * aren't stored in the database column so only the original string will * be written to the disk. * * A C++ reference of the second parameter containing the escaped string * afterwards is also returned by this method too, providing the possibility * to write more elegant code. * * @param from Input string with which may contain dangerous characters * @param to String instance where the escaped characters should be written to * @return Reference to the second parameter containing the escaped characters * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error */ string& escape( const string& from, string& to ) throw( std::exception ); /** * Creates a statement object from a SQL text string using a C style buffer. * * This method returns an instance of the Stmt class that contains the * statement sent to the database server later on. Currently, only simple * statements are supported, which are sent to the database server for * parsing and returning the result after calling Stmt::execute(). Later * on also prepared statements will be possible which are parsed by the * database server when creating the object and only the parameters * will be sent to the database server on execution. This can speed up * processing especially if the statement is executed multiple times * with different content for the parameters. * * The parameter named \a sql must contain the SQL text string that should be * sent to the database server for execution. It have to be a C style * buffer in this case. For a reference of valid SQL statements, please * have a look at the documentation of your database server. * * The length of the statement excluding the trailing "0" byte should * be given via the second parameter \a size. If the length of the statement is * unknown, you can also supply zero (0) as size value which is also the * default value if you hand over only one parameter. In this case, the * length of the string is calculated internally by this function before * the statement is given to the native database library. * * Via the last parameter it can be selected how the statement should * be treated internally by the OpenDBX and the native database library. * Currently, only simple processing is available which sends complete * SQL statements including its parameters as string to the database * server for parsing and execution. Later on, also prepared statement * handling will be available which parses the statements first and * sends only the parameters to the server before execution. This * parameter is also optional. * * The returned object is representing the given statement, which can * be executed later on. The statement is only valid for the current * connection and as soon as the connection gets invalid or is closed, * working with this object will throw an error. * * @param sql SQL text string containing a valid statement understood by the database server * @param size Size of the SQL text string in bytes * @param type Type of statement object that should be created * @return Statement instance bound to this connection * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error * @see Stmt */ Stmt create( const char* sql, unsigned long size = 0, Stmt::Type type = Stmt::Simple ) throw( std::exception ); /** * Creates a statement object from a SQL text string using a C++ string. * * This method returns an instance of the Stmt class that contains the * statement sent to the database server later on. Currently, only simple * statements are supported, which are sent to the database server for * parsing and returning the result after calling Stmt::execute(). Later * on also prepared statements will be possible which are parsed by the * database server when creating the object and only the parameters * will be sent to the database server on execution. This can speed up * processing especially if the statement is executed multiple times * with different content for the parameters. * * The parameter named \a sql must contain the SQL text string that should be * sent to the database server for execution. It have to be a C++ style * string in this case. For a reference of valid SQL statements, please * have a look at the documentation of your database server. * * Via the last parameter \a type it can be selected how the statement should * be treated internally by the OpenDBX and the native database library. * Currently, only simple processing is available which sends complete * SQL statements including its parameters as string to the database * server for parsing and execution. Later on, also prepared statement * handling will be available which parses the statements first and * sends only the parameters to the server before execution. This * parameter is also optional. * * The returned object is representing the given statement, which can * be executed later on. The statement is only valid for the current * connection and as soon as the connection gets invalid or is closed, * working with this object will throw an error. * * @param sql SQL text string containing a valid statement understood by the database server * @param type Type of statement object that should be created * @return Statement instance bound to this connection * @throws std::invalid_argument If the object was only initialized by the default constructor * @throws OpenDBX::Exception If the underlying database library returns an error * @see Stmt */ Stmt create( const string& sql, Stmt::Type type = Stmt::Simple ) throw( std::exception ); }; } // namespace OpenDBX } // extern C++ #endif opendbx-1.4.6/lib/opendbx/api.h0000644000175000017500000002135211425153451013235 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include #include #include #ifndef ODBX_H #define ODBX_H #ifdef __cplusplus extern "C" { #endif /* * Extended capabilities supported by the backends * 0x0000-0x00ff: Well known capabilities */ enum odbxcap { ODBX_CAP_BASIC, #define ODBX_CAP_BASIC ODBX_CAP_BASIC ODBX_CAP_LO #define ODBX_CAP_LO ODBX_CAP_LO }; /* * ODBX bind type */ enum odbxbind { ODBX_BIND_SIMPLE #define ODBX_BIND_SIMPLE ODBX_BIND_SIMPLE }; /* * ODBX error types */ enum odbxerr { ODBX_ERR_SUCCESS, #define ODBX_ERR_SUCCESS ODBX_ERR_SUCCESS ODBX_ERR_BACKEND, #define ODBX_ERR_BACKEND ODBX_ERR_BACKEND ODBX_ERR_NOCAP, #define ODBX_ERR_NOCAP ODBX_ERR_NOCAP ODBX_ERR_PARAM, #define ODBX_ERR_PARAM ODBX_ERR_PARAM ODBX_ERR_NOMEM, #define ODBX_ERR_NOMEM ODBX_ERR_NOMEM ODBX_ERR_SIZE, #define ODBX_ERR_SIZE ODBX_ERR_SIZE ODBX_ERR_NOTEXIST, #define ODBX_ERR_NOTEXIST ODBX_ERR_NOTEXIST ODBX_ERR_NOOP, #define ODBX_ERR_NOOP ODBX_ERR_NOOP ODBX_ERR_OPTION, #define ODBX_ERR_OPTION ODBX_ERR_OPTION ODBX_ERR_OPTRO, #define ODBX_ERR_OPTRO ODBX_ERR_OPTRO ODBX_ERR_OPTWR, #define ODBX_ERR_OPTWR ODBX_ERR_OPTWR ODBX_ERR_RESULT, #define ODBX_ERR_RESULT ODBX_ERR_RESULT ODBX_ERR_NOTSUP, #define ODBX_ERR_NOTSUP ODBX_ERR_NOTSUP ODBX_ERR_HANDLE #define ODBX_ERR_HANDLE ODBX_ERR_HANDLE }; #define ODBX_MAX_ERRNO 0x0d /* * ODBX result/fetch return values */ enum odbxres { ODBX_RES_DONE, #define ODBX_RES_DONE ODBX_RES_DONE ODBX_RES_TIMEOUT, #define ODBX_RES_TIMEOUT ODBX_RES_TIMEOUT ODBX_RES_NOROWS, #define ODBX_RES_NOROWS ODBX_RES_NOROWS ODBX_RES_ROWS #define ODBX_RES_ROWS ODBX_RES_ROWS }; enum odbxrow { ODBX_ROW_DONE, #define ODBX_ROW_DONE ODBX_ROW_DONE ODBX_ROW_NEXT #define ODBX_ROW_NEXT ODBX_ROW_NEXT }; /* * ODBX (SQL2003) data types */ enum odbxtype { ODBX_TYPE_BOOLEAN = 0x00, #define ODBX_TYPE_BOOLEAN ODBX_TYPE_BOOLEAN ODBX_TYPE_SMALLINT = 0x01, #define ODBX_TYPE_SMALLINT ODBX_TYPE_SMALLINT ODBX_TYPE_INTEGER = 0x02, #define ODBX_TYPE_INTEGER ODBX_TYPE_INTEGER ODBX_TYPE_BIGINT = 0x03, #define ODBX_TYPE_BIGINT ODBX_TYPE_BIGINT ODBX_TYPE_DECIMAL = 0x07, #define ODBX_TYPE_DECIMAL ODBX_TYPE_DECIMAL ODBX_TYPE_REAL = 0x08, #define ODBX_TYPE_REAL ODBX_TYPE_REAL ODBX_TYPE_DOUBLE = 0x09, #define ODBX_TYPE_DOUBLE ODBX_TYPE_DOUBLE ODBX_TYPE_FLOAT = 0x0f, #define ODBX_TYPE_FLOAT ODBX_TYPE_FLOAT ODBX_TYPE_CHAR = 0x10, #define ODBX_TYPE_CHAR ODBX_TYPE_CHAR ODBX_TYPE_NCHAR = 0x11, #define ODBX_TYPE_NCHAR ODBX_TYPE_NCHAR ODBX_TYPE_VARCHAR = 0x12, #define ODBX_TYPE_VARCHAR ODBX_TYPE_VARCHAR ODBX_TYPE_NVARCHAR = 0x13, #define ODBX_TYPE_NVARCHAR ODBX_TYPE_NVARCHAR ODBX_TYPE_CLOB = 0x20, #define ODBX_TYPE_CLOB ODBX_TYPE_CLOB ODBX_TYPE_NCLOB = 0x21, #define ODBX_TYPE_NCLOB ODBX_TYPE_NCLOB ODBX_TYPE_XML = 0x22, #define ODBX_TYPE_XML ODBX_TYPE_XML ODBX_TYPE_BLOB = 0x2f, #define ODBX_TYPE_BLOB ODBX_TYPE_BLOB ODBX_TYPE_TIME = 0x30, #define ODBX_TYPE_TIME ODBX_TYPE_TIME ODBX_TYPE_TIMETZ = 0x31, #define ODBX_TYPE_TIMETZ ODBX_TYPE_TIMETZ ODBX_TYPE_TIMESTAMP = 0x32, #define ODBX_TYPE_TIMESTAMP ODBX_TYPE_TIMESTAMP ODBX_TYPE_TIMESTAMPTZ = 0x33, #define ODBX_TYPE_TIMESTAMPTZ ODBX_TYPE_TIMESTAMPTZ ODBX_TYPE_DATE = 0x34, #define ODBX_TYPE_DATE ODBX_TYPE_DATE ODBX_TYPE_INTERVAL = 0x35, #define ODBX_TYPE_INTERVAL ODBX_TYPE_INTERVAL ODBX_TYPE_ARRAY = 0x40, #define ODBX_TYPE_ARRAY ODBX_TYPE_ARRAY ODBX_TYPE_MULTISET = 0x41, #define ODBX_TYPE_MULTISET ODBX_TYPE_MULTISET ODBX_TYPE_DATALINK = 0x50, #define ODBX_TYPE_DATALINK ODBX_TYPE_DATALINK ODBX_TYPE_UNKNOWN = 0xff #define ODBX_TYPE_UNKNOWN ODBX_TYPE_UNKNOWN }; /* * ODBX options * * 0x0000 - 0x1fff reserved for api options * 0x2000 - 0x3fff reserved for api extension options * 0x4000 - 0xffff reserved for vendor specific and experimental options */ enum odbxopt { /* Informational options */ ODBX_OPT_API_VERSION = 0x0000, #define ODBX_OPT_API_VERSION ODBX_OPT_API_VERSION ODBX_OPT_THREAD_SAFE = 0x0001, #define ODBX_OPT_THREAD_SAFE ODBX_OPT_THREAD_SAFE ODBX_OPT_LIB_VERSION = 0x0002, #define ODBX_OPT_LIB_VERSION ODBX_OPT_LIB_VERSION /* Security related options */ ODBX_OPT_TLS = 0x0010, #define ODBX_OPT_TLS ODBX_OPT_TLS /* Implemented options */ ODBX_OPT_MULTI_STATEMENTS = 0x0020, #define ODBX_OPT_MULTI_STATEMENTS ODBX_OPT_MULTI_STATEMENTS ODBX_OPT_PAGED_RESULTS = 0x0021, #define ODBX_OPT_PAGED_RESULTS ODBX_OPT_PAGED_RESULTS ODBX_OPT_COMPRESS = 0x0022, #define ODBX_OPT_COMPRESS ODBX_OPT_COMPRESS ODBX_OPT_MODE = 0x0023, #define ODBX_OPT_MODE ODBX_OPT_MODE ODBX_OPT_CONNECT_TIMEOUT = 0x0024 #define ODBX_OPT_CONNECT_TIMEOUT ODBX_OPT_CONNECT_TIMEOUT }; /* SSL/TLS related options */ enum odbxtls { ODBX_TLS_NEVER, #define ODBX_TLS_NEVER ODBX_TLS_NEVER ODBX_TLS_TRY, #define ODBX_TLS_TRY ODBX_TLS_TRY ODBX_TLS_ALWAYS #define ODBX_TLS_ALWAYS ODBX_TLS_ALWAYS }; #define ODBX_DISABLE 0 #define ODBX_ENABLE 1 typedef struct odbx_t odbx_t; typedef struct odbx_lo_t odbx_lo_t; typedef struct odbx_result_t odbx_result_t; /* * ODBX basic operations */ int odbx_init( odbx_t** handle, const char* backend, const char* host, const char* port ); int odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); int odbx_unbind( odbx_t* handle ); int odbx_finish( odbx_t* handle ); int odbx_capabilities( odbx_t* handle, unsigned int cap ); int odbx_get_option( odbx_t* handle, unsigned int option, void* value ); int odbx_set_option( odbx_t* handle, unsigned int option, void* value ); const char* odbx_error( odbx_t* handle, int error ); int odbx_error_type( odbx_t* handle, int error ); int odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ); int odbx_query( odbx_t* handle, const char* query, unsigned long length ); int odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); int odbx_result_finish( odbx_result_t* result ); int odbx_row_fetch( odbx_result_t* result ); uint64_t odbx_rows_affected( odbx_result_t* result ); unsigned long odbx_column_count( odbx_result_t* result ); const char* odbx_column_name( odbx_result_t* result, unsigned long pos ); int odbx_column_type( odbx_result_t* result, unsigned long pos ); unsigned long odbx_field_length( odbx_result_t* result, unsigned long pos ); const char* odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * ODBX large object operations */ int odbx_lo_open( odbx_result_t* result, odbx_lo_t** lo, const char* value ); ssize_t odbx_lo_read( odbx_lo_t* lo, void* buffer, size_t buflen ); ssize_t odbx_lo_write( odbx_lo_t* lo, void* buffer, size_t buflen ); int odbx_lo_close( odbx_lo_t* lo ); /* * Depricated defines and functions * * They won't be available in version 2.0 any more * Please don't use and replace them in your code */ /* * Depricated types */ #define ODBX_BOOLEAN 0x00 #define ODBX_SMALLINT 0x01 #define ODBX_INTEGER 0x02 #define ODBX_BIGINT 0x03 #define ODBX_DECIMAL 0x07 #define ODBX_REAL 0x08 #define ODBX_DOUBLE 0x09 #define ODBX_FLOAT 0x0f #define ODBX_CHAR 0x10 #define ODBX_NCHAR 0x11 #define ODBX_VARCHAR 0x12 #define ODBX_NVARCHAR 0x13 #define ODBX_CLOB 0x20 #define ODBX_NCLOB 0x21 #define ODBX_XML 0x22 #define ODBX_BLOB 0x2f #define ODBX_TIME 0x30 #define ODBX_TIME_TZ 0x31 #define ODBX_TIMESTAMP 0x32 #define ODBX_TIMESTAMP_TZ 0x33 #define ODBX_DATE 0x34 #define ODBX_INTERVAL 0x35 #define ODBX_ARRAY 0x40 #define ODBX_MULTISET 0x41 #define ODBX_DATALINK 0x50 #define ODBX_UNKNOWN 0xff /* * Depricated errors */ #define ODBX_ERR_TOOLONG ODBX_ERR_SIZE /* * Depricated functions */ int odbx_bind_simple( odbx_t* handle, const char* database, const char* username, const char* password ); void odbx_result_free( odbx_result_t* result ); #ifdef __cplusplus } #endif #endif opendbx-1.4.6/AUTHORS0000644000175000017500000000056011425153446011160 00000000000000OpenDBX developers and contributors Main developers: - Norbert Sendetzky (mysql, pgsql, sqlite, sqlite3, firebird, mssql, sybase, oracle, odbc, interface, maintenance) Contributors: - Kees Monshouwer (excellent spec file for building rpm packages) - Mariano Martinez Peck (much testing especially on Windows) - Sven Wegener (gcc compatibilty improvements) opendbx-1.4.6/NEWS0000644000175000017500000000006411425153451010602 00000000000000Please have a look at the ChangeLog file for updatesopendbx-1.4.6/opendbxplus.pc.in0000644000175000017500000000035211425153453013401 00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ includedir=@includedir@ Name: OpenDBX Plus Description: C++ Lightweight database abstraction layer Version: @VERSION@ Libs: -L${libdir} -lopendbxplus Cflags: -I${includedir} opendbx-1.4.6/Makefile.am0000644000175000017500000000057411425153446012151 00000000000000ACLOCAL_AMFLAGS = -I m4 SUBDIRS = backends doc lib po test utils EXTRA_DIST = config.rpath \ debian/changelog \ debian/compat \ debian/control \ debian/copyright \ debian/docs \ debian/rules \ debian/watch \ opendbx.pc.in \ opendbxplus.pc.in \ opendbx.spec.in \ opendbx.spec \ ABOUT-NLS pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = opendbx.pc opendbxplus.pc opendbx-1.4.6/ltmain.sh0000755000175000017500000073341511765211273011747 00000000000000# Generated from ltmain.m4sh. # ltmain.sh (GNU libtool) 2.2.6b # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, # or obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # Usage: $progname [OPTION]... [MODE-ARG]... # # Provide generalized library-building support services. # # --config show all configuration variables # --debug enable verbose shell tracing # -n, --dry-run display commands without modifying any files # --features display basic configuration information and exit # --mode=MODE use operation mode MODE # --preserve-dup-deps don't remove duplicate dependency libraries # --quiet, --silent don't print informational messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print informational messages (default) # --version print version information # -h, --help print short or long help message # # MODE must be one of the following: # # clean remove files from the build directory # compile compile a source file into a libtool object # execute automatically set library path, then run a program # finish complete the installation of libtool libraries # install install libraries or executables # link create a library or an executable # uninstall remove libraries from an installed directory # # MODE-ARGS vary depending on the MODE. # Try `$progname --help --mode=MODE' for a more detailed description of MODE. # # When reporting a bug, please describe a test case to reproduce it and # include the following information: # # host-triplet: $host # shell: $SHELL # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) # $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1 # automake: $automake_version # autoconf: $autoconf_version # # Report bugs to . PROGRAM=ltmain.sh PACKAGE=libtool VERSION="2.2.6b Debian-2.2.6b-2ubuntu1" TIMESTAMP="" package_revision=1.3017 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # NLS nuisances: We save the old values to restore during execute mode. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). lt_user_locale= lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then save_$lt_var=\$$lt_var $lt_var=C export $lt_var lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done $lt_unset CDPATH : ${CP="cp -f"} : ${ECHO="echo"} : ${EGREP="/bin/grep -E"} : ${FGREP="/bin/grep -F"} : ${GREP="/bin/grep"} : ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} : ${SED="/bin/sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} # Global variables: EXIT_SUCCESS=0 EXIT_FAILURE=1 EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" dirname="s,/[^/]*$,," basename="s,^.*/,," # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } # Generated shell functions inserted here. # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh # is ksh but when the shell is invoked as "sh" and the current value of # the _XPG environment variable is not equal to 1 (one), the special # positional parameter $0, within a function call, is the name of the # function. progpath="$0" # The name of this program: # In the unlikely event $progname began with a '-', it would play havoc with # func_echo (imagine progname=-n), so we prepend ./ in that case: func_dirname_and_basename "$progpath" progname=$func_basename_result case $progname in -*) progname=./$progname ;; esac # Make sure we have an absolute path for reexecution: case $progpath in [\\/]*|[A-Za-z]:\\*) ;; *[\\/]*) progdir=$func_dirname_result progdir=`cd "$progdir" && pwd` progpath="$progdir/$progname" ;; *) save_IFS="$IFS" IFS=: for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break done IFS="$save_IFS" test -n "$progdir" || progdir=`pwd` progpath="$progdir/$progname" ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([`"$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Re-`\' parameter expansions in output of double_quote_subst that were # `\'-ed in input to the same. If an odd number of `\' preceded a '$' # in input to double_quote_subst, that '$' was protected from expansion. # Since each input `\' is now two `\'s, look for any number of runs of # four `\'s followed by two `\'s and then a '$'. `\' that '$'. bs='\\' bs2='\\\\' bs4='\\\\\\\\' dollar='\$' sed_double_backslash="\ s/$bs4/&\\ /g s/^$bs2$dollar/$bs&/ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g s/\n//g" # Standard options: opt_dry_run=false opt_help=false opt_quiet=false opt_verbose=false opt_warning=: # func_echo arg... # Echo program name prefixed message, along with the current mode # name if it has been set yet. func_echo () { $ECHO "$progname${mode+: }$mode: $*" } # func_verbose arg... # Echo program name prefixed message in verbose mode only. func_verbose () { $opt_verbose && func_echo ${1+"$@"} # A bug in bash halts the script if the last line of a function # fails when set -e is in force, so we need another command to # work around that: : } # func_error arg... # Echo program name prefixed message to standard error. func_error () { $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 } # func_warning arg... # Echo program name prefixed warning message to standard error. func_warning () { $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 # bash bug again: : } # func_fatal_error arg... # Echo program name prefixed message to standard error, and exit. func_fatal_error () { func_error ${1+"$@"} exit $EXIT_FAILURE } # func_fatal_help arg... # Echo program name prefixed message to standard error, followed by # a help hint, and exit. func_fatal_help () { func_error ${1+"$@"} func_fatal_error "$help" } help="Try \`$progname --help' for more information." ## default # func_grep expression filename # Check whether EXPRESSION matches any line of FILENAME, without output. func_grep () { $GREP "$1" "$2" >/dev/null 2>&1 } # func_mkdir_p directory-path # Make sure the entire path to DIRECTORY-PATH is available. func_mkdir_p () { my_directory_path="$1" my_dir_list= if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then # Protect directory names starting with `-' case $my_directory_path in -*) my_directory_path="./$my_directory_path" ;; esac # While some portion of DIR does not yet exist... while test ! -d "$my_directory_path"; do # ...make a list in topmost first order. Use a colon delimited # list incase some portion of path contains whitespace. my_dir_list="$my_directory_path:$my_dir_list" # If the last portion added has no slash in it, the list is done case $my_directory_path in */*) ;; *) break ;; esac # ...otherwise throw away the child directory and loop my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` done my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` save_mkdir_p_IFS="$IFS"; IFS=':' for my_dir in $my_dir_list; do IFS="$save_mkdir_p_IFS" # mkdir can fail with a `File exist' error if two processes # try to create one of the directories concurrently. Don't # stop in that case! $MKDIR "$my_dir" 2>/dev/null || : done IFS="$save_mkdir_p_IFS" # Bail out if we (or some other process) failed to create a directory. test -d "$my_directory_path" || \ func_fatal_error "Failed to create \`$1'" fi } # func_mktempdir [string] # Make a temporary directory that won't clash with other running # libtool processes, and avoids race conditions if possible. If # given, STRING is the basename for that directory. func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else # If mktemp works, use that first and foremost my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then # Failing that, at least try and use $RANDOM to avoid a race my_tmpdir="${my_template}-${RANDOM-0}$$" save_mktempdir_umask=`umask` umask 0077 $MKDIR "$my_tmpdir" umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure test -d "$my_tmpdir" || \ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi $ECHO "X$my_tmpdir" | $Xsed } # func_quote_for_eval arg # Aesthetically quote ARG to be evaled later. # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT # is double-quoted, suitable for a subsequent eval, whereas # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters # which are still active within double quotes backslashified. func_quote_for_eval () { case $1 in *[\\\`\"\$]*) func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; *) func_quote_for_eval_unquoted_result="$1" ;; esac case $func_quote_for_eval_unquoted_result in # Double-quote args containing shell metacharacters to delay # word splitting, command substitution and and variable # expansion for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ;; *) func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" esac } # func_quote_for_expand arg # Aesthetically quote ARG to be evaled later; same as above, # but do not quote variable references. func_quote_for_expand () { case $1 in *[\\\`\"]*) my_arg=`$ECHO "X$1" | $Xsed \ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; *) my_arg="$1" ;; esac case $my_arg in # Double-quote args containing shell metacharacters to delay # word splitting and command substitution for a subsequent eval. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") my_arg="\"$my_arg\"" ;; esac func_quote_for_expand_result="$my_arg" } # func_show_eval cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. func_show_eval () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$my_cmd" my_status=$? if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_show_eval_locale cmd [fail_exp] # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP # is given, then evaluate it. Use the saved locale for evaluation. func_show_eval_locale () { my_cmd="$1" my_fail_exp="${2-:}" ${opt_silent-false} || { func_quote_for_expand "$my_cmd" eval "func_echo $func_quote_for_expand_result" } if ${opt_dry_run-false}; then :; else eval "$lt_user_locale $my_cmd" my_status=$? eval "$lt_safe_locale" if test "$my_status" -eq 0; then :; else eval "(exit $my_status); $my_fail_exp" fi fi } # func_version # Echo version message to standard output and exit. func_version () { $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { s/^# // s/^# *$// s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ p }' < "$progpath" exit $? } # func_usage # Echo short help message to standard output and exit. func_usage () { $SED -n '/^# Usage:/,/# -h/ { s/^# // s/^# *$// s/\$progname/'$progname'/ p }' < "$progpath" $ECHO $ECHO "run \`$progname --help | more' for full usage" exit $? } # func_help # Echo long help message to standard output and exit. func_help () { $SED -n '/^# Usage:/,/# Report bugs to/ { s/^# // s/^# *$// s*\$progname*'$progname'* s*\$host*'"$host"'* s*\$SHELL*'"$SHELL"'* s*\$LTCC*'"$LTCC"'* s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ p }' < "$progpath" exit $? } # func_missing_arg argname # Echo program name prefixed message to standard error and set global # exit_cmd. func_missing_arg () { func_error "missing argument for $1" exit_cmd=exit } exit_cmd=: # Check that we have a working $ECHO. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then # Yippee, $ECHO works! : else # Restart under the correct shell, and then maybe $ECHO will work. exec $SHELL "$progpath" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1; then taglist="$taglist $tagname" # Evaluate the configuration. Be careful to quote the path # and the sed script, to avoid splitting on whitespace, but # also don't use non-portable quotes within backquotes within # quotes we have to do it in 2 steps: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` eval "$extractedcf" else func_error "ignoring unknown tag $tagname" fi ;; esac } # Parse options once, thoroughly. This comes as soon as possible in # the script to make things like `libtool --version' happen quickly. { # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) shift; set dummy --mode clean ${1+"$@"}; shift ;; compile|compil|compi|comp|com|co|c) shift; set dummy --mode compile ${1+"$@"}; shift ;; execute|execut|execu|exec|exe|ex|e) shift; set dummy --mode execute ${1+"$@"}; shift ;; finish|finis|fini|fin|fi|f) shift; set dummy --mode finish ${1+"$@"}; shift ;; install|instal|insta|inst|ins|in|i) shift; set dummy --mode install ${1+"$@"}; shift ;; link|lin|li|l) shift; set dummy --mode link ${1+"$@"}; shift ;; uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; esac # Parse non-mode specific arguments: while test "$#" -gt 0; do opt="$1" shift case $opt in --config) func_config ;; --debug) preserve_args="$preserve_args $opt" func_echo "enabling shell trace mode" opt_debug='set -x' $opt_debug ;; -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break execute_dlfiles="$execute_dlfiles $1" shift ;; --dry-run | -n) opt_dry_run=: ;; --features) func_features ;; --finish) mode="finish" ;; --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break case $1 in # Valid mode arguments: clean) ;; compile) ;; execute) ;; finish) ;; install) ;; link) ;; relink) ;; uninstall) ;; # Catch anything else as an error *) func_error "invalid argument for $opt" exit_cmd=exit break ;; esac mode="$1" shift ;; --preserve-dup-deps) opt_duplicate_deps=: ;; --quiet|--silent) preserve_args="$preserve_args $opt" opt_silent=: ;; --verbose| -v) preserve_args="$preserve_args $opt" opt_silent=false ;; --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break preserve_args="$preserve_args $opt $1" func_enable_tag "$1" # tagname is set here shift ;; # Separate optargs to long options: -dlopen=*|--mode=*|--tag=*) func_opt_split "$opt" set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} shift ;; -\?|-h) func_usage ;; --help) opt_help=: ;; --version) func_version ;; -*) func_fatal_help "unrecognized option \`$opt'" ;; *) nonopt="$opt" break ;; esac done case $host in *cygwin* | *mingw* | *pw32* | *cegcc*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; *) opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ;; esac # Having warned about all mis-specified options, bail out if # anything was wrong. $exit_cmd $EXIT_FAILURE } # func_check_version_match # Ensure that we are using m4 macros, and libtool script from the same # release of libtool. func_check_version_match () { if test "$package_revision" != "$macro_revision"; then if test "$VERSION" != "$macro_version"; then if test -z "$macro_version"; then cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from an older release. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, but the $progname: definition of this LT_INIT comes from $PACKAGE $macro_version. $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION $progname: and run autoconf again. _LT_EOF fi else cat >&2 <<_LT_EOF $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, $progname: but the definition of this LT_INIT comes from revision $macro_revision. $progname: You should recreate aclocal.m4 with macros from revision $package_revision $progname: of $PACKAGE $VERSION and run autoconf again. _LT_EOF fi exit $EXIT_MISMATCH fi } ## ----------- ## ## Main. ## ## ----------- ## $opt_help || { # Sanity checks first: func_check_version_match if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then func_fatal_configuration "not configured to build any kind of library" fi test -z "$mode" && func_fatal_error "error: you must specify a MODE." # Darwin sucks eval std_shrext=\"$shrext_cmds\" # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then func_error "unrecognized option \`-dlopen'" $ECHO "$help" 1>&2 exit $EXIT_FAILURE fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$progname --help --mode=$mode' for more information." } # func_lalib_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_lalib_p () { test -f "$1" && $SED -e 4q "$1" 2>/dev/null \ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 } # func_lalib_unsafe_p file # True iff FILE is a libtool `.la' library or `.lo' object file. # This function implements the same check as func_lalib_p without # resorting to external programs. To this end, it redirects stdin and # closes it afterwards, without saving the original file descriptor. # As a safety measure, use it only where a negative result would be # fatal anyway. Works if `file' does not exist. func_lalib_unsafe_p () { lalib_p=no if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then for lalib_p_l in 1 2 3 4 do read lalib_p_line case "$lalib_p_line" in \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; esac done exec 0<&5 5<&- fi test "$lalib_p" = yes } # func_ltwrapper_script_p file # True iff FILE is a libtool wrapper script # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_script_p () { func_lalib_p "$1" } # func_ltwrapper_executable_p file # True iff FILE is a libtool wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_executable_p () { func_ltwrapper_exec_suffix= case $1 in *.exe) ;; *) func_ltwrapper_exec_suffix=.exe ;; esac $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 } # func_ltwrapper_scriptname file # Assumes file is an ltwrapper_executable # uses $file to determine the appropriate filename for a # temporary ltwrapper_script. func_ltwrapper_scriptname () { func_ltwrapper_scriptname_result="" if func_ltwrapper_executable_p "$1"; then func_dirname_and_basename "$1" "" "." func_stripname '' '.exe' "$func_basename_result" func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" fi } # func_ltwrapper_p file # True iff FILE is a libtool wrapper script or wrapper executable # This function is only a basic sanity check; it will hardly flush out # determined imposters. func_ltwrapper_p () { func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" } # func_execute_cmds commands fail_cmd # Execute tilde-delimited COMMANDS. # If FAIL_CMD is given, eval that upon failure. # FAIL_CMD may read-access the current command in variable CMD! func_execute_cmds () { $opt_debug save_ifs=$IFS; IFS='~' for cmd in $1; do IFS=$save_ifs eval cmd=\"$cmd\" func_show_eval "$cmd" "${2-:}" done IFS=$save_ifs } # func_source file # Source FILE, adding directory component if necessary. # Note that it is not necessary on cygwin/mingw to append a dot to # FILE even if both FILE and FILE.exe exist: automatic-append-.exe # behavior happens only for exec(3), not for open(2)! Also, sourcing # `FILE.' does not work on cygwin managed mounts. func_source () { $opt_debug case $1 in */* | *\\*) . "$1" ;; *) . "./$1" ;; esac } # func_infer_tag arg # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. # arg is usually of the form 'gcc ...' func_infer_tag () { $opt_debug if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do func_quote_for_eval "$arg" CC_quoted="$CC_quoted $func_quote_for_eval_result" done case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do # Double-quote args containing other shell metacharacters. func_quote_for_eval "$arg" CC_quoted="$CC_quoted $func_quote_for_eval_result" done case "$@ " in " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then func_echo "unable to infer tagged configuration" func_fatal_error "specify a tag with \`--tag'" # else # func_verbose "using $tagname tagged configuration" fi ;; esac fi } # func_write_libtool_object output_name pic_name nonpic_name # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. func_write_libtool_object () { write_libobj=${1} if test "$build_libtool_libs" = yes; then write_lobj=\'${2}\' else write_lobj=none fi if test "$build_old_libs" = yes; then write_oldobj=\'${3}\' else write_oldobj=none fi $opt_dry_run || { cat >${write_libobj}T <?"'"'"' &()|`$[]' \ && func_warning "libobj name \`$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" objname="$func_basename_result" xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname test -z "$base_compile" && \ func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi removelist="$removelist $output_obj" $ECHO "$srcfile" > "$lockfile" fi $opt_dry_run || $RM $removelist removelist="$removelist $lockfile" trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi func_quote_for_eval "$srcfile" qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then command="$base_compile $qsrcfile $pic_flag" else # Don't build PIC code command="$base_compile $qsrcfile" fi func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir command="$command -o $lobj" fi func_show_eval_locale "$command" \ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then func_show_eval '$MV "$output_obj" "$lobj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then suppress_output=' >/dev/null 2>&1' fi fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" func_show_eval_locale "$command" \ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then func_show_eval '$MV "$output_obj" "$obj"' \ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi fi $opt_dry_run || { func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" # Unlock the critical section if it was locked if test "$need_locks" != no; then removelist=$lockfile $RM "$lockfile" fi } exit $EXIT_SUCCESS } $opt_help || { test "$mode" = compile && func_mode_compile ${1+"$@"} } func_mode_help () { # We need to display help for each of the modes. case $mode in "") # Generic help is extracted from the usage comments # at the start of this file. func_help ;; clean) $ECHO \ "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $ECHO \ "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -no-suppress do not suppress compiler output for multiple passes -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -shared do not build a \`.o' file suitable for static linking -static only build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $ECHO \ "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $ECHO \ "Usage: $progname [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $ECHO \ "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The following components of INSTALL-COMMAND are treated specially: -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $ECHO \ "Usage: $progname [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -precious-files-regex REGEX don't remove output files matching REGEX -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -shared only do dynamic linking of libtool libraries -shrext SUFFIX override the standard shared library file extension -static do not do any dynamic linking of uninstalled libtool libraries -static-libtool-libs do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] -weak LIBNAME declare that the target provides the LIBNAME interface All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $ECHO \ "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) func_fatal_help "invalid operation mode \`$mode'" ;; esac $ECHO $ECHO "Try \`$progname --help' for more information about other modes." exit $? } # Now that we've collected a possible --mode arg, show help if necessary $opt_help && func_mode_help # func_mode_execute arg... func_mode_execute () { $opt_debug # The first argument is the command name. cmd="$nonopt" test -z "$cmd" && \ func_fatal_help "you must specify a COMMAND" # Handle -dlopen flags immediately. for file in $execute_dlfiles; do test -f "$file" \ || func_fatal_help "\`$file' is not a file" dir= case $file in *.la) # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$lib' is not a valid libtool archive" # Read the libtool library. dlname= library_names= func_source "$file" # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && \ func_warning "\`$file' was not linked with \`-export-dynamic'" continue fi func_dirname "$file" "" "." dir="$func_dirname_result" if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else if test ! -f "$dir/$dlname"; then func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" fi fi ;; *.lo) # Just add the directory containing the .lo file. func_dirname "$file" "" "." dir="$func_dirname_result" ;; *) func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if func_ltwrapper_script_p "$file"; then func_source "$file" # Transform arg to wrapped name. file="$progdir/$program" elif func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" func_source "$func_ltwrapper_scriptname_result" # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). func_quote_for_eval "$file" args="$args $func_quote_for_eval_result" done if test "X$opt_dry_run" = Xfalse; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved environment variables for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${save_$lt_var+set}\" = set; then $lt_var=\$save_$lt_var; export $lt_var else $lt_unset $lt_var fi" done # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" $ECHO "export $shlibpath_var" fi $ECHO "$cmd$args" exit $EXIT_SUCCESS fi } test "$mode" = execute && func_mode_execute ${1+"$@"} # func_mode_finish arg... func_mode_finish () { $opt_debug libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. func_execute_cmds "$finish_cmds" 'admincmds="$admincmds '"$cmd"'"' fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $opt_dry_run || eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. $opt_silent && exit $EXIT_SUCCESS $ECHO "X----------------------------------------------------------------------" | $Xsed $ECHO "Libraries have been installed in:" for libdir in $libdirs; do $ECHO " $libdir" done $ECHO $ECHO "If you ever happen to want to link against installed libraries" $ECHO "in a given directory, LIBDIR, you must either use libtool, and" $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" $ECHO "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" $ECHO " during execution" fi if test -n "$runpath_var"; then $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" $ECHO " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" $ECHO " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then $ECHO " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi $ECHO $ECHO "See any operating system documentation about shared libraries for" case $host in solaris2.[6789]|solaris2.1[0-9]) $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" $ECHO "pages." ;; *) $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." ;; esac $ECHO "X----------------------------------------------------------------------" | $Xsed exit $EXIT_SUCCESS } test "$mode" = finish && func_mode_finish ${1+"$@"} # func_mode_install arg... func_mode_install () { $opt_debug # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $ECHO "X$nonopt" | $GREP shtool >/dev/null; then # Aesthetically quote it. func_quote_for_eval "$nonopt" install_prog="$func_quote_for_eval_result " arg=$1 shift else install_prog= arg=$nonopt fi # The real first argument should be the name of the installation program. # Aesthetically quote it. func_quote_for_eval "$arg" install_prog="$install_prog$func_quote_for_eval_result" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest=$arg continue fi case $arg in -d) isdir=yes ;; -f) case " $install_prog " in *[\\\ /]cp\ *) ;; *) prev=$arg ;; esac ;; -g | -m | -o) prev=$arg ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest=$arg continue fi ;; esac # Aesthetically quote the argument. func_quote_for_eval "$arg" install_prog="$install_prog $func_quote_for_eval_result" done test -z "$install_prog" && \ func_fatal_help "you must specify an install program" test -n "$prev" && \ func_fatal_help "the \`$prev' option requires an argument" if test -z "$files"; then if test -z "$dest"; then func_fatal_help "no file or destination specified" else func_fatal_help "you must specify a destination" fi fi # Strip any trailing slash from the destination. func_stripname '' '/' "$dest" dest=$func_stripname_result # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else func_dirname_and_basename "$dest" "" "." destdir="$func_dirname_result" destname="$func_basename_result" # Not a directory, so check to see that there is only one file specified. set dummy $files; shift test "$#" -gt 1 && \ func_fatal_help "\`$dest' is not a directory" fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) func_fatal_help "\`$destdir' must be an absolute directory name" ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$file" \ || func_fatal_help "\`$file' is not a valid libtool archive" library_names= old_library= relink_command= func_source "$file" # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi func_dirname "$file" "/" "" dir="$func_dirname_result" dir="$dir$objdir" if test -n "$relink_command"; then # Determine the prefix the user has applied to our future dir. inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that # are installed to the same prefix. # At present, this check doesn't affect windows .dll's that # are installed into $libdir/../bin (currently, that works fine) # but it's something to keep an eye on. test "$inst_prefix_dir" = "$destdir" && \ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" if test -n "$inst_prefix_dir"; then # Stick the inst_prefix_dir data into the link command. relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` else relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` fi func_warning "relinking \`$file'" func_show_eval "$relink_command" \ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' fi # See the names of the shared library. set dummy $library_names; shift if test -n "$1"; then realname="$1" shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ 'exit $?' tstripme="$stripme" case $host_os in cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme="" ;; esac ;; esac if test -n "$tstripme" && test -n "$striplib"; then func_show_eval "$striplib $destdir/$realname" 'exit $?' fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. # Try `ln -sf' first, because the `ln' binary might depend on # the symlink we replace! Solaris /bin/ln does not understand -f, # so we also need to try rm && ln -s. for linkname do test "$linkname" != "$realname" \ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" done fi # Do each command in the postinstall commands. lib="$destdir/$realname" func_execute_cmds "$postinstall_cmds" 'exit $?' fi # Install the pseudo-library for information purposes. func_basename "$file" name="$func_basename_result" instname="$dir/$name"i func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) func_lo2o "$destfile" staticdest=$func_lo2o_result ;; *.$objext) staticdest="$destfile" destfile= ;; *) func_fatal_help "cannot copy a libtool object to \`$destfile'" ;; esac # Install the libtool object if requested. test -n "$destfile" && \ func_show_eval "$install_prog $file $destfile" 'exit $?' # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. func_lo2o "$file" staticobj=$func_lo2o_result func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' fi exit $EXIT_SUCCESS ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else func_basename "$file" destfile="$func_basename_result" destfile="$destdir/$destfile" fi # If the file is missing, and there is a .exe on the end, strip it # because it is most likely a libtool script we actually want to # install stripped_ext="" case $file in *.exe) if test ! -f "$file"; then func_stripname '' '.exe' "$file" file=$func_stripname_result stripped_ext=".exe" fi ;; esac # Do a test to see if this is really a libtool program. case $host in *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result else func_stripname '' '.exe' "$file" wrapper=$func_stripname_result fi ;; *) wrapper=$file ;; esac if func_ltwrapper_script_p "$wrapper"; then notinst_deplibs= relink_command= func_source "$wrapper" # Check the variables that should have been set. test -z "$generated_by_libtool_version" && \ func_fatal_error "invalid libtool wrapper script \`$wrapper'" finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then func_source "$lib" fi libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then func_warning "\`$lib' has not been installed in \`$libdir'" finalize=no fi done relink_command= func_source "$wrapper" outputname= if test "$fast_install" = no && test -n "$relink_command"; then $opt_dry_run || { if test "$finalize" = yes; then tmpdir=`func_mktempdir` func_basename "$file$stripped_ext" file="$func_basename_result" outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $opt_silent || { func_quote_for_expand "$relink_command" eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else func_error "error: relink \`$file' with the above command before installing it" $opt_dry_run || ${RM}r "$tmpdir" continue fi file="$outputname" else func_warning "cannot relink \`$file'" fi } else # Install the binary that we compiled earlier. file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyway case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) func_stripname '' '.exe' "$destfile" destfile=$func_stripname_result ;; esac ;; esac func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' $opt_dry_run || if test -n "$outputname"; then ${RM}r "$tmpdir" fi ;; esac done for file in $staticlibs; do func_basename "$file" name="$func_basename_result" # Set up the ranlib parameters. oldlib="$destdir/$name" func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then func_show_eval "$old_striplib $oldlib" 'exit $?' fi # Do each command in the postinstall commands. func_execute_cmds "$old_postinstall_cmds" 'exit $?' done test -n "$future_libdirs" && \ func_warning "remember to run \`$progname --finish$future_libdirs'" if test -n "$current_libdirs"; then # Maybe just do a dry run. $opt_dry_run && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' else exit $EXIT_SUCCESS fi } test "$mode" = install && func_mode_install ${1+"$@"} # func_generate_dlsyms outputname originator pic_p # Extract symbols from dlprefiles and create ${outputname}S.o with # a dlpreopen symbol table. func_generate_dlsyms () { $opt_debug my_outputname="$1" my_originator="$2" my_pic_p="${3-no}" my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` my_dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then my_dlsyms="${my_outputname}S.c" else func_error "not configured to extract global symbols from dlpreopened files" fi fi if test -n "$my_dlsyms"; then case $my_dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${my_outputname}.nm" func_show_eval "$RM $nlist ${nlist}S ${nlist}T" # Parse the name list into a source file. func_verbose "creating $output_objdir/$my_dlsyms" $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ #ifdef __cplusplus extern \"C\" { #endif /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then func_verbose "generating symbol list for \`$output'" $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for progfile in $progfiles; do func_verbose "extracting global C symbols from \`$progfile'" $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $opt_dry_run || { eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi if test -n "$export_symbols_regex"; then $opt_dry_run || { eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' } fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$outputname.exp" $opt_dry_run || { $RM $export_symbols eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; esac } else $opt_dry_run || { eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in *cygwin | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; esac } fi fi for dlprefile in $dlprefiles; do func_verbose "extracting global C symbols from \`$dlprefile'" func_basename "$dlprefile" name="$func_basename_result" $opt_dry_run || { eval '$ECHO ": $name " >> "$nlist"' eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" } done $opt_dry_run || { # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $MV "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if $GREP -v "^: " < "$nlist" | if sort -k 3 /dev/null 2>&1; then sort -k 3 else sort +2 fi | uniq > "$nlist"S; then : else $GREP -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' else $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" fi $ECHO >> "$output_objdir/$my_dlsyms" "\ /* The mapping between symbol names and symbols. */ typedef struct { const char *name; void *address; } lt_dlsymlist; " case $host in *cygwin* | *mingw* | *cegcc* ) $ECHO >> "$output_objdir/$my_dlsyms" "\ /* DATA imports from DLLs on WIN32 con't be const, because runtime relocations are performed -- see ld's documentation on pseudo-relocs. */" lt_dlsym_const= ;; *osf5*) echo >> "$output_objdir/$my_dlsyms" "\ /* This system does not cope well with relocations in const data */" lt_dlsym_const= ;; *) lt_dlsym_const=const ;; esac $ECHO >> "$output_objdir/$my_dlsyms" "\ extern $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[]; $lt_dlsym_const lt_dlsymlist lt_${my_prefix}_LTX_preloaded_symbols[] = {\ { \"$my_originator\", (void *) 0 }," case $need_lib_prefix in no) eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; *) eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ;; esac $ECHO >> "$output_objdir/$my_dlsyms" "\ {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_${my_prefix}_LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " } # !$opt_dry_run pic_flag_for_symtable= case "$compile_command " in *" -static "*) ;; *) case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; *) if test "X$my_pic_p" != Xno; then pic_flag_for_symtable=" $pic_flag" fi ;; esac ;; esac symtab_cflags= for arg in $LTCFLAGS; do case $arg in -pie | -fpie | -fPIE) ;; *) symtab_cflags="$symtab_cflags $arg" ;; esac done # Now compile the dynamic symbol file. func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' # Clean up the generated files. func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' # Transform the symbol file into the correct name. symfileobj="$output_objdir/${my_outputname}S.$objext" case $host in *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` else compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` fi ;; *) compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ;; esac ;; *) func_fatal_error "unknown suffix for \`$my_dlsyms'" ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi } # func_win32_libid arg # return the library type of file 'arg' # # Need a lot of goo to handle *both* DLLs and import libs # Has to be a shell function in order to 'eat' the argument # that is supplied when $file_magic_command is called. func_win32_libid () { $opt_debug win32_libid_type="unknown" win32_fileres=`file -L $1 2>/dev/null` case $win32_fileres in *ar\ archive\ import\ library*) # definitely import win32_libid_type="x86 archive import" ;; *ar\ archive*) # could be an import, or static if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then win32_nmres=`eval $NM -f posix -A $1 | $SED -n -e ' 1,100{ / I /{ s,.*,import, p q } }'` case $win32_nmres in import*) win32_libid_type="x86 archive import";; *) win32_libid_type="x86 archive static";; esac fi ;; *DLL*) win32_libid_type="x86 DLL" ;; *executable*) # but shell scripts are "executable" too... case $win32_fileres in *MS\ Windows\ PE\ Intel*) win32_libid_type="x86 DLL" ;; esac ;; esac $ECHO "$win32_libid_type" } # func_extract_an_archive dir oldlib func_extract_an_archive () { $opt_debug f_ex_an_ar_dir="$1"; shift f_ex_an_ar_oldlib="$1" func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then : else func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" fi } # func_extract_archives gentop oldlib ... func_extract_archives () { $opt_debug my_gentop="$1"; shift my_oldlibs=${1+"$@"} my_oldobjs="" my_xlib="" my_xabs="" my_xdir="" for my_xlib in $my_oldlibs; do # Extract the objects. case $my_xlib in [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; *) my_xabs=`pwd`"/$my_xlib" ;; esac func_basename "$my_xlib" my_xlib="$func_basename_result" my_xlib_u=$my_xlib while :; do case " $extracted_archives " in *" $my_xlib_u "*) func_arith $extracted_serial + 1 extracted_serial=$func_arith_result my_xlib_u=lt$extracted_serial-$my_xlib ;; *) break ;; esac done extracted_archives="$extracted_archives $my_xlib_u" my_xdir="$my_gentop/$my_xlib_u" func_mkdir_p "$my_xdir" case $host in *-darwin*) func_verbose "Extracting $my_xabs" # Do not bother doing anything if just a dry run $opt_dry_run || { darwin_orig_dir=`pwd` cd $my_xdir || exit $? darwin_archive=$my_xabs darwin_curdir=`pwd` darwin_base_archive=`basename "$darwin_archive"` darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` if test -n "$darwin_arches"; then darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` darwin_arch= func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" for darwin_arch in $darwin_arches ; do func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" func_extract_an_archive "`pwd`" "${darwin_base_archive}" cd "$darwin_curdir" $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" done # $darwin_arches ## Okay now we've a bunch of thin objects, gotta fatten them up :) darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` darwin_file= darwin_files= for darwin_file in $darwin_filelist; do darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` $LIPO -create -output "$darwin_file" $darwin_files done # $darwin_filelist $RM -rf unfat-$$ cd "$darwin_orig_dir" else cd $darwin_orig_dir func_extract_an_archive "$my_xdir" "$my_xabs" fi # $darwin_arches } # !$opt_dry_run ;; *) func_extract_an_archive "$my_xdir" "$my_xabs" ;; esac my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done func_extract_archives_result="$my_oldobjs" } # func_emit_wrapper_part1 [arg=no] # # Emit the first part of a libtool wrapper script on stdout. # For more information, see the description associated with # func_emit_wrapper(), below. func_emit_wrapper_part1 () { func_emit_wrapper_part1_arg1=no if test -n "$1" ; then func_emit_wrapper_part1_arg1=$1 fi $ECHO "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='${SED} -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # Be Bourne compatible if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variables: generated_by_libtool_version='$macro_version' notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$ECHO are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then ECHO=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then # Yippee, \$ECHO works! : else # Restart under the correct shell, and then maybe \$ECHO will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $ECHO "\ # Find the directory that this script lives in. thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done " } # end: func_emit_wrapper_part1 # func_emit_wrapper_part2 [arg=no] # # Emit the second part of a libtool wrapper script on stdout. # For more information, see the description associated with # func_emit_wrapper(), below. func_emit_wrapper_part2 () { func_emit_wrapper_part2_arg1=no if test -n "$1" ; then func_emit_wrapper_part2_arg1=$1 fi $ECHO "\ # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then # special case for '.' if test \"\$thisdir\" = \".\"; then thisdir=\`pwd\` fi # remove .libs from thisdir case \"\$thisdir\" in *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; $objdir ) thisdir=. ;; esac fi # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then $ECHO "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $MKDIR \"\$progdir\" else $RM \"\$progdir/\$file\" fi" $ECHO "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $ECHO \"\$relink_command_output\" >&2 $RM \"\$progdir/\$file\" exit 1 fi fi $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $RM \"\$progdir/\$program\"; $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } $RM \"\$progdir/\$file\" fi" else $ECHO "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi $ECHO "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $ECHO "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $ECHO "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $ECHO "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # Backslashes separate directories on plain windows *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} " ;; *) $ECHO "\ exec \"\$progdir/\$program\" \${1+\"\$@\"} " ;; esac $ECHO "\ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 exit 1 fi else # The program doesn't exist. \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " } # end: func_emit_wrapper_part2 # func_emit_wrapper [arg=no] # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to # incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. # # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory in which it is stored is # the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { func_emit_wrapper_arg1=no if test -n "$1" ; then func_emit_wrapper_arg1=$1 fi # split this up so that func_emit_cwrapperexe_src # can call each part independently. func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" } # func_to_host_path arg # # Convert paths to host format when used with build tools. # Intended for use with "native" mingw (where libtool itself # is running under the msys shell), or in the following cross- # build environments: # $build $host # mingw (msys) mingw [e.g. native] # cygwin mingw # *nix + wine mingw # where wine is equipped with the `winepath' executable. # In the native mingw case, the (msys) shell automatically # converts paths for any non-msys applications it launches, # but that facility isn't available from inside the cwrapper. # Similar accommodations are necessary for $host mingw and # $build cygwin. Calling this function does no harm for other # $host/$build combinations not listed above. # # ARG is the path (on $build) that should be converted to # the proper representation for $host. The result is stored # in $func_to_host_path_result. func_to_host_path () { func_to_host_path_result="$1" if test -n "$1" ; then case $host in *mingw* ) lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' case $build in *mingw* ) # actually, msys # awkward: cmd appends spaces to result lt_sed_strip_trailing_spaces="s/[ ]*\$//" func_to_host_path_tmp1=`( cmd //c echo "$1" |\ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` ;; *cygwin* ) func_to_host_path_tmp1=`cygpath -w "$1"` func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` ;; * ) # Unfortunately, winepath does not exit with a non-zero # error code, so we are forced to check the contents of # stdout. On the other hand, if the command is not # found, the shell will set an exit code of 127 and print # *an error message* to stdout. So we must check for both # error code of zero AND non-empty stdout, which explains # the odd construction: func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ $SED -e "$lt_sed_naive_backslashify"` else # Allow warning below. func_to_host_path_result="" fi ;; esac if test -z "$func_to_host_path_result" ; then func_error "Could not determine host path corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback: func_to_host_path_result="$1" fi ;; esac fi } # end: func_to_host_path # func_to_host_pathlist arg # # Convert pathlists to host format when used with build tools. # See func_to_host_path(), above. This function supports the # following $build/$host combinations (but does no harm for # combinations not listed here): # $build $host # mingw (msys) mingw [e.g. native] # cygwin mingw # *nix + wine mingw # # Path separators are also converted from $build format to # $host format. If ARG begins or ends with a path separator # character, it is preserved (but converted to $host format) # on output. # # ARG is a pathlist (on $build) that should be converted to # the proper representation on $host. The result is stored # in $func_to_host_pathlist_result. func_to_host_pathlist () { func_to_host_pathlist_result="$1" if test -n "$1" ; then case $host in *mingw* ) lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' # Remove leading and trailing path separator characters from # ARG. msys behavior is inconsistent here, cygpath turns them # into '.;' and ';.', and winepath ignores them completely. func_to_host_pathlist_tmp2="$1" # Once set for this call, this variable should not be # reassigned. It is used in tha fallback case. func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e 's|^:*||' -e 's|:*$||'` case $build in *mingw* ) # Actually, msys. # Awkward: cmd appends spaces to result. lt_sed_strip_trailing_spaces="s/[ ]*\$//" func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e "$lt_sed_naive_backslashify"` ;; *cygwin* ) func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ $SED -e "$lt_sed_naive_backslashify"` ;; * ) # unfortunately, winepath doesn't convert pathlists func_to_host_pathlist_result="" func_to_host_pathlist_oldIFS=$IFS IFS=: for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do IFS=$func_to_host_pathlist_oldIFS if test -n "$func_to_host_pathlist_f" ; then func_to_host_path "$func_to_host_pathlist_f" if test -n "$func_to_host_path_result" ; then if test -z "$func_to_host_pathlist_result" ; then func_to_host_pathlist_result="$func_to_host_path_result" else func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" fi fi fi IFS=: done IFS=$func_to_host_pathlist_oldIFS ;; esac if test -z "$func_to_host_pathlist_result" ; then func_error "Could not determine the host path(s) corresponding to" func_error " '$1'" func_error "Continuing, but uninstalled executables may not work." # Fallback. This may break if $1 contains DOS-style drive # specifications. The fix is not to complicate the expression # below, but for the user to provide a working wine installation # with winepath so that path translation in the cross-to-mingw # case works properly. lt_replace_pathsep_nix_to_dos="s|:|;|g" func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ $SED -e "$lt_replace_pathsep_nix_to_dos"` fi # Now, add the leading and trailing path separators back case "$1" in :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" ;; esac case "$1" in *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" ;; esac ;; esac fi } # end: func_to_host_pathlist # func_emit_cwrapperexe_src # emit the source code for a wrapper executable on stdout # Must ONLY be called from within func_mode_link because # it depends on a number of variable set therein. func_emit_cwrapperexe_src () { cat < #include #ifdef _MSC_VER # include # include # include # define setmode _setmode #else # include # include # ifdef __CYGWIN__ # include # define HAVE_SETENV # ifdef __STRICT_ANSI__ char *realpath (const char *, char *); int putenv (char *); int setenv (const char *, const char *, int); # endif # endif #endif #include #include #include #include #include #include #include #include #if defined(PATH_MAX) # define LT_PATHMAX PATH_MAX #elif defined(MAXPATHLEN) # define LT_PATHMAX MAXPATHLEN #else # define LT_PATHMAX 1024 #endif #ifndef S_IXOTH # define S_IXOTH 0 #endif #ifndef S_IXGRP # define S_IXGRP 0 #endif #ifdef _MSC_VER # define S_IXUSR _S_IEXEC # define stat _stat # ifndef _INTPTR_T_DEFINED # define intptr_t int # endif #endif #ifndef DIR_SEPARATOR # define DIR_SEPARATOR '/' # define PATH_SEPARATOR ':' #endif #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ defined (__OS2__) # define HAVE_DOS_BASED_FILE_SYSTEM # define FOPEN_WB "wb" # ifndef DIR_SEPARATOR_2 # define DIR_SEPARATOR_2 '\\' # endif # ifndef PATH_SEPARATOR_2 # define PATH_SEPARATOR_2 ';' # endif #endif #ifndef DIR_SEPARATOR_2 # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) #else /* DIR_SEPARATOR_2 */ # define IS_DIR_SEPARATOR(ch) \ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) #endif /* DIR_SEPARATOR_2 */ #ifndef PATH_SEPARATOR_2 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) #else /* PATH_SEPARATOR_2 */ # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) #endif /* PATH_SEPARATOR_2 */ #ifdef __CYGWIN__ # define FOPEN_WB "wb" #endif #ifndef FOPEN_WB # define FOPEN_WB "w" #endif #ifndef _O_BINARY # define _O_BINARY 0 #endif #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) #define XFREE(stale) do { \ if (stale) { free ((void *) stale); stale = 0; } \ } while (0) #undef LTWRAPPER_DEBUGPRINTF #if defined DEBUGWRAPPER # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args static void ltwrapper_debugprintf (const char *fmt, ...) { va_list args; va_start (args, fmt); (void) vfprintf (stderr, fmt, args); va_end (args); } #else # define LTWRAPPER_DEBUGPRINTF(args) #endif const char *program_name = NULL; void *xmalloc (size_t num); char *xstrdup (const char *string); const char *base_name (const char *name); char *find_executable (const char *wrapper); char *chase_symlinks (const char *pathspec); int make_executable (const char *path); int check_executable (const char *path); char *strendzap (char *str, const char *pat); void lt_fatal (const char *message, ...); void lt_setenv (const char *name, const char *value); char *lt_extend_str (const char *orig_value, const char *add, int to_end); void lt_opt_process_env_set (const char *arg); void lt_opt_process_env_prepend (const char *arg); void lt_opt_process_env_append (const char *arg); int lt_split_name_value (const char *arg, char** name, char** value); void lt_update_exe_path (const char *name, const char *value); void lt_update_lib_path (const char *name, const char *value); static const char *script_text_part1 = EOF func_emit_wrapper_part1 yes | $SED -e 's/\([\\"]\)/\\\1/g' \ -e 's/^/ "/' -e 's/$/\\n"/' echo ";" cat <"))); for (i = 0; i < newargc; i++) { LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : ""))); } EOF case $host_os in mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); if (rval == -1) { /* failed to start process */ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); return 127; } return rval; EOF ;; *) cat <<"EOF" execv (lt_argv_zero, newargz); return rval; /* =127, but avoids unused variable warning */ EOF ;; esac cat <<"EOF" } void * xmalloc (size_t num) { void *p = (void *) malloc (num); if (!p) lt_fatal ("Memory exhausted"); return p; } char * xstrdup (const char *string) { return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL; } const char * base_name (const char *name) { const char *base; #if defined (HAVE_DOS_BASED_FILE_SYSTEM) /* Skip over the disk name in MSDOS pathnames. */ if (isalpha ((unsigned char) name[0]) && name[1] == ':') name += 2; #endif for (base = name; *name; name++) if (IS_DIR_SEPARATOR (*name)) base = name + 1; return base; } int check_executable (const char *path) { struct stat st; LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; if ((stat (path, &st) >= 0) && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) return 1; else return 0; } int make_executable (const char *path) { int rval = 0; struct stat st; LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!")); if ((!path) || (!*path)) return 0; if (stat (path, &st) >= 0) { rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); } return rval; } /* Searches for the full path of the wrapper. Returns newly allocated full path name if found, NULL otherwise Does not chase symlinks, even on platforms that support them. */ char * find_executable (const char *wrapper) { int has_slash = 0; const char *p; const char *p_next; /* static buffer for getcwd */ char tmp[LT_PATHMAX + 1]; int tmp_len; char *concat_name; LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); if ((wrapper == NULL) || (*wrapper == '\0')) return NULL; /* Absolute path? */ #if defined (HAVE_DOS_BASED_FILE_SYSTEM) if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } else { #endif if (IS_DIR_SEPARATOR (wrapper[0])) { concat_name = xstrdup (wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } #if defined (HAVE_DOS_BASED_FILE_SYSTEM) } #endif for (p = wrapper; *p; p++) if (*p == '/') { has_slash = 1; break; } if (!has_slash) { /* no slashes; search PATH */ const char *path = getenv ("PATH"); if (path != NULL) { for (p = path; *p; p = p_next) { const char *q; size_t p_len; for (q = p; *q; q++) if (IS_PATH_SEPARATOR (*q)) break; p_len = q - p; p_next = (*q == '\0' ? q : q + 1); if (p_len == 0) { /* empty path: current directory */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); } else { concat_name = XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, p, p_len); concat_name[p_len] = '/'; strcpy (concat_name + p_len + 1, wrapper); } if (check_executable (concat_name)) return concat_name; XFREE (concat_name); } } /* not found in PATH; assume curdir */ } /* Relative path | not found in path: prepend cwd */ if (getcwd (tmp, LT_PATHMAX) == NULL) lt_fatal ("getcwd failed"); tmp_len = strlen (tmp); concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); memcpy (concat_name, tmp, tmp_len); concat_name[tmp_len] = '/'; strcpy (concat_name + tmp_len + 1, wrapper); if (check_executable (concat_name)) return concat_name; XFREE (concat_name); return NULL; } char * chase_symlinks (const char *pathspec) { #ifndef S_ISLNK return xstrdup (pathspec); #else char buf[LT_PATHMAX]; struct stat s; char *tmp_pathspec = xstrdup (pathspec); char *p; int has_symlinks = 0; while (strlen (tmp_pathspec) && !has_symlinks) { LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", tmp_pathspec)); if (lstat (tmp_pathspec, &s) == 0) { if (S_ISLNK (s.st_mode) != 0) { has_symlinks = 1; break; } /* search backwards for last DIR_SEPARATOR */ p = tmp_pathspec + strlen (tmp_pathspec) - 1; while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) p--; if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) { /* no more DIR_SEPARATORS left */ break; } *p = '\0'; } else { char *errstr = strerror (errno); lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); } } XFREE (tmp_pathspec); if (!has_symlinks) { return xstrdup (pathspec); } tmp_pathspec = realpath (pathspec, buf); if (tmp_pathspec == 0) { lt_fatal ("Could not follow symlinks for %s", pathspec); } return xstrdup (tmp_pathspec); #endif } char * strendzap (char *str, const char *pat) { size_t len, patlen; assert (str != NULL); assert (pat != NULL); len = strlen (str); patlen = strlen (pat); if (patlen <= len) { str += len - patlen; if (strcmp (str, pat) == 0) *str = '\0'; } return str; } static void lt_error_core (int exit_status, const char *mode, const char *message, va_list ap) { fprintf (stderr, "%s: %s: ", program_name, mode); vfprintf (stderr, message, ap); fprintf (stderr, ".\n"); if (exit_status >= 0) exit (exit_status); } void lt_fatal (const char *message, ...) { va_list ap; va_start (ap, message); lt_error_core (EXIT_FAILURE, "FATAL", message, ap); va_end (ap); } void lt_setenv (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", (name ? name : ""), (value ? value : ""))); { #ifdef HAVE_SETENV /* always make a copy, for consistency with !HAVE_SETENV */ char *str = xstrdup (value); setenv (name, str, 1); #else int len = strlen (name) + 1 + strlen (value) + 1; char *str = XMALLOC (char, len); sprintf (str, "%s=%s", name, value); if (putenv (str) != EXIT_SUCCESS) { XFREE (str); } #endif } } char * lt_extend_str (const char *orig_value, const char *add, int to_end) { char *new_value; if (orig_value && *orig_value) { int orig_value_len = strlen (orig_value); int add_len = strlen (add); new_value = XMALLOC (char, add_len + orig_value_len + 1); if (to_end) { strcpy (new_value, orig_value); strcpy (new_value + orig_value_len, add); } else { strcpy (new_value, add); strcpy (new_value + add_len, orig_value); } } else { new_value = xstrdup (add); } return new_value; } int lt_split_name_value (const char *arg, char** name, char** value) { const char *p; int len; if (!arg || !*arg) return 1; p = strchr (arg, (int)'='); if (!p) return 1; *value = xstrdup (++p); len = strlen (arg) - strlen (*value); *name = XMALLOC (char, len); strncpy (*name, arg, len-1); (*name)[len - 1] = '\0'; return 0; } void lt_opt_process_env_set (const char *arg) { char *name = NULL; char *value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); } lt_setenv (name, value); XFREE (name); XFREE (value); } void lt_opt_process_env_prepend (const char *arg) { char *name = NULL; char *value = NULL; char *new_value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); } new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); XFREE (name); XFREE (value); } void lt_opt_process_env_append (const char *arg) { char *name = NULL; char *value = NULL; char *new_value = NULL; if (lt_split_name_value (arg, &name, &value) != 0) { XFREE (name); XFREE (value); lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); } new_value = lt_extend_str (getenv (name), value, 1); lt_setenv (name, new_value); XFREE (new_value); XFREE (name); XFREE (value); } void lt_update_exe_path (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", (name ? name : ""), (value ? value : ""))); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); /* some systems can't cope with a ':'-terminated path #' */ int len = strlen (new_value); while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) { new_value[len-1] = '\0'; } lt_setenv (name, new_value); XFREE (new_value); } } void lt_update_lib_path (const char *name, const char *value) { LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", (name ? name : ""), (value ? value : ""))); if (name && *name && value && *value) { char *new_value = lt_extend_str (getenv (name), value, 0); lt_setenv (name, new_value); XFREE (new_value); } } EOF } # end: func_emit_cwrapperexe_src # func_mode_link arg... func_mode_link () { $opt_debug case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invocation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args=$nonopt base_compile="$nonopt $@" compile_command=$nonopt finalize_command=$nonopt compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= new_inherited_linker_flags= avoid_version=no dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= non_pic_objects= precious_files_regex= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= vinfo_number=no weak_libs= single_module="${wl}-single_module" func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in -shared) test "$build_libtool_libs" != yes && \ func_fatal_configuration "can not build a shared library" build_old_libs=no break ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; -static) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=built ;; -static-libtool-libs) if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi prefer_static_libs=yes ;; esac build_libtool_libs=no build_old_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test "$#" -gt 0; do arg="$1" shift func_quote_for_eval "$arg" qarg=$func_quote_for_eval_unquoted_result func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) func_append compile_command " @OUTPUT@" func_append finalize_command " @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. func_append compile_command " @SYMFILE@" func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" test -f "$arg" \ || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; framework) case $host in *-*-darwin*) case "$deplibs " in *" $qarg.ltframework "*) ;; *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ;; esac ;; esac prev= continue ;; inst_prefix) inst_prefix_dir="$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat "$save_arg"` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; precious_regex) precious_files_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; shrext) shrext_cmds="$arg" prev= continue ;; weak) weak_libs="$weak_libs $arg" prev= continue ;; xcclinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= func_append compile_command " $qarg" func_append finalize_command " $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= func_append compile_command " $wl$qarg" func_append finalize_command " $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n "$prev" prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then # See comment for -static flag below, for more details. func_append compile_command " $link_static_flag" func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; -framework) prev=framework continue ;; -inst-prefix-dir) prev=inst_prefix continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) func_append compile_command " $arg" func_append finalize_command " $arg" ;; esac continue ;; -L*) func_stripname '-L' '' "$arg" dir=$func_stripname_result if test -z "$dir"; then if test "$#" -gt 0; then func_fatal_error "require no space between \`-L' and \`$1'" else func_fatal_error "need path for \`-L' option" fi fi # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` test -z "$absdir" && \ func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; ::) dllsearchpath=$dir;; *) dllsearchpath="$dllsearchpath:$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) # These systems don't actually have a C or math library (as such) continue ;; *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework deplibs="$deplibs System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype test "X$arg" = "X-lc" && continue ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; -module) module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. -model|-arch|-isysroot) compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) compiler_flags="$compiler_flags $arg" func_append compile_command " $arg" func_append finalize_command " $arg" case "$new_inherited_linker_flags " in *" $arg "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; esac continue ;; -multi_module) single_module="${wl}-multi_module" continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "\`-no-install' is ignored for $host" func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -precious-files-regex) prev=precious_regex continue ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) func_stripname '-R' '' "$arg" dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -shared) # The effects of -shared are defined in a previous loop. continue ;; -shrext) prev=shrext continue ;; -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -version-number) prev=vinfo vinfo_number=yes continue ;; -weak) prev=weak continue ;; -Wc,*) func_stripname '-Wc,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" arg="$arg $wl$func_quote_for_eval_result" compiler_flags="$compiler_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Wl,*) func_stripname '-Wl,' '' "$arg" args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" func_quote_for_eval "$flag" arg="$arg $wl$func_quote_for_eval_result" compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" linker_flags="$linker_flags $func_quote_for_eval_result" done IFS="$save_ifs" func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; -XCClinker) prev=xcclinker continue ;; # -msg_* for osf cc -msg_*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; # -64, -mips[0-9] enable 64-bit mode on the SGI compiler # -r[0-9][0-9]* specifies the processor on the SGI compiler # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler # +DA*, +DD* enable 64-bit mode on the HP compiler # -q* pass through compiler args for the IBM compiler # -m*, -t[45]*, -txscale* pass through architecture-specific # compiler args for GCC # -F/path gives path to uninstalled frameworks, gcc on darwin # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC # @file GCC response files -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" func_append compile_command " $arg" func_append finalize_command " $arg" compiler_flags="$compiler_flags $arg" continue ;; # Some other compiler flag. -* | +*) func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file func_source "$arg" if test -z "$pic_object" || test -z "$non_pic_object" || test "$pic_object" = none && test "$non_pic_object" = none; then func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. func_append libobjs " $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi else # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. if $opt_dry_run; then # Extract subdirectory from the argument. func_dirname "$arg" "/" "" xdir="$func_dirname_result" func_lo2o "$arg" pic_object=$xdir$objdir/$func_lo2o_result non_pic_object=$xdir$func_lo2o_result func_append libobjs " $pic_object" func_append non_pic_objects " $non_pic_object" else func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. func_quote_for_eval "$arg" arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then func_append compile_command " $arg" func_append finalize_command " $arg" fi done # argument parsing loop test -n "$prev" && \ func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" func_append compile_command " $arg" func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory func_basename "$output" outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" func_dirname "$output" "/" "" output_objdir="$func_dirname_result$objdir" # Create the object directory. func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do if $opt_duplicate_deps ; then case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi libs="$libs $deplib" done if test "$linkmode" = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" # Compute libraries that are listed more than once in $predeps # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; esac pre_post_deps="$pre_post_deps $pre_post_dep" done fi pre_post_deps= fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do # The preopen pass in lib mode reverses $deplibs; put it back here # so that -L comes before libs that need it for instance... if test "$linkmode,$pass" = "lib,link"; then ## FIXME: Find the place where the list is rebuilt in the wrong ## order, and fix it there properly tmp_deplibs= for deplib in $deplibs; do tmp_deplibs="$deplib $tmp_deplibs" done deplibs="$tmp_deplibs" fi if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test "$linkmode" = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS%" test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ;; esac fi if test "$linkmode,$pass" = "lib,dlpreopen"; then # Collect and forward deplibs of preopened libtool libs for lib in $dlprefiles; do # Ignore non-libtool-libs dependency_libs= case $lib in *.la) func_source "$lib" ;; esac # Collect preopened libtool deplibs, except any this library # has declared as weak libs for deplib in $dependency_libs; do deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` case " $weak_libs " in *" $deplib_base "*) ;; *) deplibs="$deplibs $deplib" ;; esac done done libs="$dlprefiles" fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else compiler_flags="$compiler_flags $deplib" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi continue ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then func_warning "\`-l' is ignored for archives/objects" continue fi func_stripname '-l' '' "$deplib" name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" fi for searchdir in $searchdirs; do for search_ext in .la $std_shrext .so .a; do # Search the libtool library lib="$searchdir/lib${name}${search_ext}" if test -f "$lib"; then if test "$search_ext" = ".la"; then found=yes else found=no fi break 2 fi done done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue else # deplib is a libtool library # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, # We need to do some special things here, and not later. if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) if func_lalib_p "$lib"; then library_names= old_library= func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no func_dirname "$lib" "" "." ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi fi ;; *) ;; esac fi fi ;; # -l *.ltframework) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" if test "$linkmode" = lib ; then case "$new_inherited_linker_flags " in *" $deplib "*) ;; * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; esac fi fi continue ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; *) func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then func_stripname '-R' '' "$deplib" dir=$func_stripname_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) # Linking convenience modules into shared libraries is allowed, # but linking other static libraries is non-portable. case " $dlpreconveniencelibs " in *" $deplib "*) ;; *) valid_a_lib=no case $deplibs_check_method in match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then valid_a_lib=yes fi ;; pass_all) valid_a_lib=yes ;; esac if test "$valid_a_lib" != yes; then $ECHO $ECHO "*** Warning: Trying to link with static lib archive $deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because the file extensions .$libext of this argument makes me believe" $ECHO "*** that it is just a static archive that I should not use here." else $ECHO $ECHO "*** Warning: Linking the shared library $output against the" $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi ;; esac continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = conv; then deplibs="$deplib $deplibs" elif test "$linkmode" = prog; then if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. func_lalib_unsafe_p "$lib" \ || func_fatal_error "\`$lib' is not a valid libtool archive" func_dirname "$lib" "" "." ladir="$func_dirname_result" dlname= dlopen= dlpreopen= libdir= library_names= old_library= inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes shouldnotlink=no avoidtemprpath= # Read the .la file func_source "$lib" # Convert "-framework foo" to "foo.ltframework" if test -n "$inherited_linker_flags"; then tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do case " $new_inherited_linker_flags " in *" $tmp_inherited_linker_flag "*) ;; *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; esac done fi dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then func_fatal_error "\`$lib' is not a convenience library" fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then func_warning "cannot determine absolute directory name of \`$ladir'" func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac func_basename "$lib" laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then dir="$ladir" absdir="$abs_ladir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi fi # $installed = yes func_stripname 'lib' '.la' "$laname" name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir" && test "$linkmode" = prog; then func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Keep a list of preopened convenience libraries to check # that they are being used correctly in the link pass. test -z "$libdir" && \ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) func_stripname '-L' '' "$deplib" newlib_search_path="$newlib_search_path $func_stripname_result" ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. case "$temp_rpath:" in *"$absdir:"*) ;; *) temp_rpath="$temp_rpath$absdir:" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then case $host in *cygwin* | *mingw* | *cegcc*) # No point in relinking DLLs because paths are not encoded notinst_deplibs="$notinst_deplibs $lib" need_relink=no ;; *) if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi ;; esac # This is a shared library # Warn about portability, can't link against -module's on some # systems (darwin). Don't bleat about dlopened modules though! dlopenmodule="" for dlpremoduletest in $dlprefiles; do if test "X$dlpremoduletest" = "X$lib"; then dlopenmodule="$dlpremoduletest" break fi done if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then $ECHO if test "$linkmode" = prog; then $ECHO "*** Warning: Linking the executable $output against the loadable module" else $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names shift realname="$1" shift libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin* | mingw* | *cegcc*) func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" func_basename "$soroot" soname="$func_basename_result" func_stripname 'lib' '.dll' "$soname" newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else func_verbose "extracting exported symbol list from \`$soname'" func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else func_verbose "generating import library for \`$soname'" func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" case $host in *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; *-*-sysv4*uw2*) add_dir="-L$dir" ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) # if the lib is a (non-dlopened) module then we can not # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null ; then if test "X$dlopenmodule" != "X$lib"; then $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library" ; then $ECHO $ECHO "*** And there doesn't seem to be a static archive available" $ECHO "*** The link will probably fail, sorry" else add="$dir/$old_library" fi elif test -n "$old_library"; then add="$dir/$old_library" fi fi esac elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes && test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then add="$inst_prefix_dir$libdir/$linklib" else add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) add_dir="$add_dir -L$inst_prefix_dir$libdir" ;; esac fi add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. $ECHO $ECHO "*** Warning: This system can not link to static lib archive $lib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then $ECHO "*** But as you try to build a module library, libtool will still create " $ECHO "*** a static module, that should work as long as the dlopening application" $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then $ECHO $ECHO "*** However, this would only work if libtool was able to extract symbol" $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" $ECHO "*** not find such a program. So, this module is probably useless." $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) func_stripname '-R' '' "$libdir" temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" if $opt_duplicate_deps ; then case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac fi tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do path= case $deplib in -L*) path="$deplib" ;; *.la) func_dirname "$deplib" "" "." dir="$func_dirname_result" # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done if test -f "$absdir/$objdir/$depdepl" ; then depdepl="$absdir/$objdir/$depdepl" darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` if test -z "$darwin_install_name"; then darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` fi compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" path= fi fi ;; *) path="-L$absdir/$objdir" ;; esac else eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" test "$absdir" != "$libdir" && \ func_warning "\`$deplib' seems to be moved" path="-L$absdir" fi ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = link; then if test "$linkmode" = "prog"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" else compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` fi fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do # FIXME: Pedantically, this is the right thing to do, so # that some nasty dependency loop isn't accidentally # broken: #new_libs="$deplib $new_libs" # Pragmatically, this seems to cause very few problems in # practice: case $deplib in -L*) new_libs="$deplib $new_libs" ;; -R*) ;; *) # And here is the reason: when a library appears more # than once as an explicit dependence of a library, or # is implicitly linked in more than once by the # compiler, it is considered special, and multiple # occurrences thereof are not removed. Compare this # with having the same library being listed as a # dependency of multiple other libraries: in this case, # we know (pedantically, we assume) the library does not # need to be listed more than once, so we keep only the # last copy. This is not always right, but it is rare # enough that we require users that really mean to play # such unportable linking tricks to link the library # using -Wl,-lname, so that libtool does not consider it # for duplicate removal. case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi # Last step: remove runtime libs from dependency_libs # (they stay in deplibs) tmp_libs= for i in $dependency_libs ; do case " $predeps $postdeps $compiler_lib_search_path " in *" $i "*) i="" ;; esac if test -n "$i" ; then tmp_libs="$tmp_libs $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" fi if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for archives" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for archives" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for archives" test -n "$xrpath" && \ func_warning "\`-R' is ignored for archives" test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for archives" test -n "$release" && \ func_warning "\`-release' is ignored for archives" test -n "$export_symbols$export_symbols_regex" && \ func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) func_stripname 'lib' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) test "$module" = no && \ func_fatal_help "libtool library \`$output' must begin with \`lib'" if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required func_stripname '' '.la' "$outputname" name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else func_stripname '' '.la' "$outputname" libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else $ECHO $ECHO "*** Warning: Linking the shared library $output against the non-libtool" $ECHO "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi test "$dlself" != no && \ func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath shift test "$#" -gt 1 && \ func_warning "ignoring multiple \`-rpath's for a libtool library" install_libdir="$1" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi test -n "$vinfo" && \ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" test -n "$release" && \ func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 shift IFS="$save_ifs" test -n "$7" && \ func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts # to make the code below a bit more comprehensible case $vinfo_number in yes) number_major="$1" number_minor="$2" number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version # and those that subtract age and use age as # a minor version. But, then there is irix # which has an extra 1 added just for fun # case $version_type in darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_revision" ;; freebsd-aout|freebsd-elf|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) func_arith $number_major + $number_minor current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no ;; *) func_fatal_configuration "$modename: unknown library version type \`$version_type'" ;; esac ;; no) current="$1" revision="$2" age="$3" ;; esac # Check that each of the things are valid numbers. case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "CURRENT \`$current' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "REVISION \`$revision' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) func_error "AGE \`$age' must be a nonnegative integer" func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then func_error "AGE \`$age' is greater than the current interface number \`$current'" func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... func_arith $current + 1 minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then func_arith $current - $age else func_arith $current - $age + 1 fi major=$func_arith_result case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; esac verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do func_arith $revision - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) func_arith $current - $age major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do func_arith $current - $loop iface=$func_arith_result func_arith $loop - 1 loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; qnx) major=".$current" versuffix=".$current" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. func_arith $current - $age major=$func_arith_result versuffix="-$major" ;; *) func_fatal_configuration "unknown library version type \`$version_type'" ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring= ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi func_generate_dlsyms "$libname" "$libname" "yes" libobjs="$libobjs $symfileobj" test "X$libobjs" = "X " && libobjs= if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 then continue fi fi removelist="$removelist $p" ;; *) ;; esac done test -n "$removelist" && \ func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) # Causes problems with __ctype ;; *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behavior. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $opt_dry_run || $RM conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null | $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | $SED -e 10q | $EGREP "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method; shift match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do case $a_deplib in -l*) func_stripname -l '' "$a_deplib" name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) newdeplibs="$newdeplibs $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ $EGREP "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done fi if test -n "$a_deplib" ; then droppeddeps=yes $ECHO $ECHO "*** Warning: linker path does not have real file for library $a_deplib." $ECHO "*** I have the capability to make that library automatically link in when" $ECHO "*** you link to this library. But I can only do this if you have a" $ECHO "*** shared version of the library, which you do not appear to have" $ECHO "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else $ECHO "*** with $libname and none of the candidates passed a file format test" $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; *) # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" ;; esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` done fi if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | $GREP . >/dev/null; then $ECHO if test "X$deplibs_check_method" = "Xnone"; then $ECHO "*** Warning: inter-library dependencies are not supported in this platform." else $ECHO "*** Warning: inter-library dependencies are not known to be supported." fi $ECHO "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library with the System framework newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then $ECHO $ECHO "*** Warning: libtool could not satisfy all declared inter-library" $ECHO "*** dependencies of module $libname. Therefore, libtool will create" $ECHO "*** a static module, that should work as long as the dlopening" $ECHO "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then $ECHO $ECHO "*** However, this would only work if libtool was able to extract symbol" $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" $ECHO "*** not find such a program. So, this module is probably useless." $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else $ECHO "*** The inter-library dependencies that have been dropped here will be" $ECHO "*** automatically added whenever a program is linked with this library" $ECHO "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then $ECHO $ECHO "*** Since this library must not contain undefined symbols," $ECHO "*** because either the platform does not support them or" $ECHO "*** it was explicitly requested with -no-undefined," $ECHO "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" case $host in *-*-darwin*) newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done deplibs="$new_libs" # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" if test -n "$hardcode_libdir_flag_spec_ld"; then eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" else eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names shift realname="$1" shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test -z "$dlname"; then dlname=$soname fi lib="$output_objdir/$realname" linknames= for link do linknames="$linknames $link" done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` test "X$libobjs" = "X " && libobjs= delfiles= if test -n "$export_symbols" && test -n "$include_expsyms"; then $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" export_symbols="$output_objdir/$libname.uexp" delfiles="$delfiles $export_symbols" fi orig_export_symbols= case $host_os in cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile if test "x`$SED 1q $export_symbols`" != xEXPORTS; then # and it's NOT already a .def file. Must figure out # which of the given symbols are data symbols and tag # them as such. So, trigger use of export_symbols_cmds. # export_symbols gets reassigned inside the "prepare # the list of exported symbols" if statement, so the # include_expsyms logic still works. orig_export_symbols="$export_symbols" export_symbols= always_export_symbols=yes fi fi ;; esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" func_len " $cmd" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then func_show_eval "$cmd" 'exit $?' skipped_export=false else # The command line is too long to execute in one step. func_verbose "using reloadable object file for export list..." skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do case " $convenience " in *" $test_deplib "*) ;; *) tmp_deplibs="$tmp_deplibs $test_deplib" ;; esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then if test -n "$whole_archive_flag_spec" && test "$compiler_needs_object" = yes && test -z "$libobjs"; then # extract the archives, so we have objects to list. # TODO: could optimize this to just extract one archive. whole_archive_flag_spec= fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $convenience libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then eval test_cmds=\"$module_expsym_cmds\" cmds=$module_expsym_cmds else eval test_cmds=\"$module_cmds\" cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval test_cmds=\"$archive_expsym_cmds\" cmds=$archive_expsym_cmds else eval test_cmds=\"$archive_cmds\" cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && func_len " $test_cmds" && len=$func_len_result && test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else # The command line is too long to link in one step, link piecewise # or, if using GNU ld and skipped_export is not :, use a linker # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output output_la=`$ECHO "X$output" | $Xsed -e "$basename"` # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= last_robj= k=1 if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then output=${output_objdir}/${output_la}.lnkscript func_verbose "creating GNU ld script: $output" $ECHO 'INPUT (' > $output for obj in $save_libobjs do $ECHO "$obj" >> $output done $ECHO ')' >> $output delfiles="$delfiles $output" elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then output=${output_objdir}/${output_la}.lnk func_verbose "creating linker input file list: $output" : > $output set x $save_libobjs shift firstobj= if test "$compiler_needs_object" = yes; then firstobj="$1 " shift fi for obj do $ECHO "$obj" >> $output done delfiles="$delfiles $output" output=$firstobj\"$file_list_spec$output\" else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." output=$output_objdir/$output_la-${k}.$objext eval test_cmds=\"$reload_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 # Loop over the list of objects to be linked. for obj in $save_libobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result if test "X$objlist" = X || test "$len" -lt "$max_cmd_len"; then func_append objlist " $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test "$k" -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" fi last_robj=$output_objdir/$output_la-${k}.$objext func_arith $k + 1 k=$func_arith_result output=$output_objdir/$output_la-${k}.$objext objlist=$obj func_len " $last_robj" func_arith $len0 + $func_len_result len=$func_arith_result fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" if test -n "$last_robj"; then eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" fi delfiles="$delfiles $output" else output= fi if ${skipped_export-false}; then func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $opt_dry_run || $RM $export_symbols libobjs=$output # Append the command to create the export file. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" if test -n "$last_robj"; then eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi fi test -n "$save_libobjs" && func_verbose "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" if test -n "$export_symbols_regex" && ${skipped_export-false}; then func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi if ${skipped_export-false}; then if test -n "$export_symbols" && test -n "$include_expsyms"; then tmp_export_symbols="$export_symbols" test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' fi if test -n "$orig_export_symbols"; then # The given exports_symbols file has to be filtered, so filter it. func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" # FIXME: $output_objdir/$libname.filter potentially contains lots of # 's' commands which not all seds can handle. GNU sed should be fine # though. Also, the filter scales superlinearly with the number of # global variables. join(1) would be nice here, but unfortunately # isn't a blessed tool. $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" export_symbols=$output_objdir/$libname.def $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi fi libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test "$module" = yes && test -n "$module_cmds" ; then if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then cmds=$module_expsym_cmds else cmds=$module_cmds fi else if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then cmds=$archive_expsym_cmds else cmds=$archive_cmds fi fi fi if test -n "$delfiles"; then # Append the command to remove temporary files to $cmds. eval cmds=\"\$cmds~\$RM $delfiles\" fi # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $dlprefiles libobjs="$libobjs $func_extract_archives_result" test "X$libobjs" = "X " && libobjs= fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" $opt_silent || { func_quote_for_expand "$cmd" eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit if test "$mode" = relink; then ( cd "$output_objdir" && \ $RM "${realname}T" && \ $MV "${realname}U" "$realname" ) fi exit $lt_exit } done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then func_show_eval '${RM}r "$gentop"' fi fi exit $EXIT_SUCCESS fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then func_warning "\`-dlopen' is ignored for objects" fi case " $deplibs" in *\ -l* | *\ -L*) func_warning "\`-l' and \`-L' are ignored for objects" ;; esac test -n "$rpath" && \ func_warning "\`-rpath' is ignored for objects" test -n "$xrpath" && \ func_warning "\`-R' is ignored for objects" test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for objects" test -n "$release" && \ func_warning "\`-release' is ignored for objects" case $output in *.lo) test -n "$objs$old_deplibs" && \ func_fatal_error "cannot build library object \`$output' from non-libtool objects" libobj=$output func_lo2o "$libobj" obj=$func_lo2o_result ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec and hope we can get by with # turning comma into space.. wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` else gentop="$output_objdir/${obj}x" generated="$generated $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS ;; prog) case $host in *cygwin*) func_stripname '' '.exe' "$output" output=$func_stripname_result.exe;; esac test -n "$vinfo" && \ func_warning "\`-version-info' is ignored for programs" test -n "$release" && \ func_warning "\`-release' is ignored for programs" test "$preload" = yes \ && test "$dlopen_support" = unknown \ && test "$dlopen_self" = unknown \ && test "$dlopen_self_static" = unknown && \ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ;; esac case $host in *-*-darwin*) # Don't allow lazy linking, it breaks C++ global constructors # But is supposedly fixed on 10.4 or later (yay!). if test "$tagname" = CXX ; then case ${MACOSX_DEPLOYMENT_TARGET-10.0} in 10.[0123]) compile_command="$compile_command ${wl}-bind_at_load" finalize_command="$finalize_command ${wl}-bind_at_load" ;; esac fi # Time to change all our "foo.ltframework" stuff back to "-framework foo" compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ;; esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list new_libs= for path in $notinst_path; do case " $new_libs " in *" -L$path/$objdir "*) ;; *) case " $compile_deplibs " in *" -L$path/$objdir "*) new_libs="$new_libs -L$path/$objdir" ;; esac ;; esac done for deplib in $compile_deplibs; do case $deplib in -L*) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$new_libs $deplib" ;; esac ;; *) new_libs="$new_libs $deplib" ;; esac done compile_deplibs="$new_libs" compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; ::) dllsearchpath=$libdir;; *) dllsearchpath="$dllsearchpath:$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; ::) dllsearchpath=$testbindir;; *) dllsearchpath="$dllsearchpath:$testbindir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi func_generate_dlsyms "$outputname" "@PROGRAM@" "no" # template prelinking step if test -n "$prelink_cmds"; then func_execute_cmds "$prelink_cmds" 'exit $?' fi wrappers_required=yes case $host in *cygwin* | *mingw* ) if test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; *cegcc) # Disable wrappers for cegcc, we are cross compiling anyway. wrappers_required=no ;; *) if test "$need_relink" = no || test "$build_libtool_libs" != yes; then wrappers_required=no fi ;; esac if test "$wrappers_required" = no; then # Replace the output file specification. compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. exit_status=0 func_show_eval "$link_command" 'exit_status=$?' # Delete the generated files. if test -f "$output_objdir/${outputname}S.${objext}"; then func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $opt_dry_run || $RM $output # Link the executable and exit func_show_eval "$link_command" 'exit $?' exit $EXIT_SUCCESS fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" func_warning "this platform does not like uninstalled shared libraries" func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname func_show_eval "$link_command" 'exit $?' # Now create the wrapper script. func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $ECHO for shipping. if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then case $progpath in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; esac qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) func_stripname '' '.exe' "$output" output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe func_stripname '' '.exe' "$outputname" outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result cwrappersource="$output_path/$objdir/lt-$output_name.c" cwrapper="$output_path/$output_name.exe" $RM $cwrappersource $cwrapper trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 func_emit_cwrapperexe_src > $cwrappersource # The wrapper executable is built using the $host compiler, # because it contains $host paths and files. If cross- # compiling, it, like the target executable, must be # executed on the $host or under an emulation environment. $opt_dry_run || { $LTCC $LTCFLAGS -o $cwrapper $cwrappersource $STRIP $cwrapper } # Now, create the wrapper script for func_source use: func_ltwrapper_scriptname $cwrapper $RM $func_ltwrapper_scriptname_result trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 $opt_dry_run || { # note: this script will not be executed, so do not chmod. if test "x$build" = "x$host" ; then $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result else func_emit_wrapper no > $func_ltwrapper_scriptname_result fi } ;; * ) $RM $output trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 func_emit_wrapper no > $output chmod +x $output ;; esac } exit $EXIT_SUCCESS ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" if test "$preload" = yes && test -f "$symfileobj"; then oldobjs="$oldobjs $symfileobj" fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $addlibs oldobjs="$oldobjs $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then cmds=$old_archive_from_new_cmds else # Add any objects from preloaded convenience libraries if test -n "$dlprefiles"; then gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_extract_archives $gentop $dlprefiles oldobjs="$oldobjs $func_extract_archives_result" fi # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a # static archive out of a convenience library, or when linking # the entirety of a libtool archive into another (currently # not supported by libtool). if (for obj in $oldobjs do func_basename "$obj" $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else $ECHO "copying selected object files to avoid basename conflicts..." gentop="$output_objdir/${outputname}x" generated="$generated $gentop" func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do func_basename "$obj" objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) while :; do # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase func_arith $counter + 1 counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" oldobjs="$oldobjs $gentop/$newobj" ;; *) oldobjs="$oldobjs $obj" ;; esac done fi eval cmds=\"$old_archive_cmds\" func_len " $cmds" len=$func_len_result if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done eval test_cmds=\"$old_archive_cmds\" func_len " $test_cmds" len0=$func_len_result len=$len0 for obj in $save_oldobjs do func_len " $obj" func_arith $len + $func_len_result len=$func_arith_result func_append objlist " $obj" if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= len=$len0 fi done RANLIB=$save_RANLIB oldobjs=$objlist if test "X$oldobjs" = "X" ; then eval cmds=\"\$concat_cmds\" else eval cmds=\"\$concat_cmds~\$old_archive_cmds\" fi fi fi func_execute_cmds "$cmds" 'exit $?' done test -n "$generated" && \ func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else func_quote_for_eval "$var_value" relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi # Only create the output if not a dry run. $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) func_basename "$deplib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do case $lib in *.la) func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" newdlfiles="$newdlfiles $libdir/$name" ;; *) newdlfiles="$newdlfiles $lib" ;; esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in *.la) # Only pass preopened files to the pseudo-archive (for # eventual linking with the app. that links it) if we # didn't already link the preopened objects directly into # the library: func_basename "$lib" name="$func_basename_result" eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` test -z "$libdir" && \ func_fatal_error "\`$lib' is not a valid libtool archive" newdlprefiles="$newdlprefiles $libdir/$name" ;; esac done dlprefiles="$newdlprefiles" else newdlfiles= for lib in $dlfiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlfiles="$newdlfiles $abs" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do case $lib in [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac newdlprefiles="$newdlprefiles $abs" done dlprefiles="$newdlprefiles" fi $RM $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $ECHO > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Linker flags that can not go in dependency_libs. inherited_linker_flags='$new_inherited_linker_flags' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Names of additional weak libraries provided by this library weak_library_names='$weak_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Should we warn about portability when linking against -modules? shouldnotlink=$module # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS } { test "$mode" = link || test "$mode" = relink; } && func_mode_link ${1+"$@"} # func_mode_uninstall arg... func_mode_uninstall () { $opt_debug RM="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) RM="$RM $arg"; rmforce=yes ;; -*) RM="$RM $arg" ;; *) files="$files $arg" ;; esac done test -z "$RM" && \ func_fatal_help "you must specify an RM program" rmdirs= origobjdir="$objdir" for file in $files; do func_dirname "$file" "" "." dir="$func_dirname_result" if test "X$dir" = X.; then objdir="$origobjdir" else objdir="$dir/$origobjdir" fi func_basename "$file" name="$func_basename_result" test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if { test -L "$file"; } >/dev/null 2>&1 || { test -h "$file"; } >/dev/null 2>&1 || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if func_lalib_p "$file"; then func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" case "$mode" in clean) case " $library_names " in # " " in the beginning catches empty $dlname *" $dlname "*) ;; *) rmfiles="$rmfiles $objdir/$dlname" ;; esac test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; esac fi ;; *.lo) # Possibly a libtool object, so verify it. if func_lalib_p "$file"; then # Read the .lo file func_source $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) if test "$mode" = clean ; then noexename=$name case $file in *.exe) func_stripname '' '.exe' "$file" file=$func_stripname_result func_stripname '' '.exe' "$name" noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe rmfiles="$rmfiles $file" ;; esac # Do a test to see if this is a libtool program. if func_ltwrapper_p "$file"; then if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" relink_command= func_source $func_ltwrapper_scriptname_result rmfiles="$rmfiles $func_ltwrapper_scriptname_result" else relink_command= func_source $dir/$noexename fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi if test "X$noexename" != "X$name" ; then rmfiles="$rmfiles $objdir/lt-${noexename}.c" fi fi fi ;; esac func_show_eval "$RM $rmfiles" 'exit_status=1' done objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status } { test "$mode" = uninstall || test "$mode" = clean; } && func_mode_uninstall ${1+"$@"} test -z "$mode" && { help="$generic_help" func_fatal_help "you must specify a MODE" } test -z "$exec_cmd" && \ func_fatal_help "invalid operation mode \`$mode'" if test -n "$exec_cmd"; then eval exec "$exec_cmd" exit $EXIT_FAILURE fi exit $exit_status # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: # vi:sw=2 opendbx-1.4.6/README0000644000175000017500000000514311425153451010766 00000000000000OpenDBX Readme: 1. Building the package 2. Installing the package 3. Using the OpenDBX library 4. Create DEB and RPM packages 1. Building the package: Do a ./configure --with-backends="" in the directory of the extracted package. Replace '' by your favorite backend, e.g. pgsql for PostgreSQL or mysql for MySQL. The command ./configure --with-backends="mysql pgsql" will build both - provided you have the client libraries installed. The ./configure script tests your system if everything is available needed by the OpenDBX library and the choosen backends. If something is not found because it's not installed in the usual location, prepend CPPFLAGS="-I" where path is pointing to the include files and LDFLAGS="-L" where path is pointing to the libraries, e.g. CPPFLAGS="-I/opt/mysql" LDFLAGS="-L/opt/mysql" ./configure --with-backends="mysql" to configure OpenDBX and the MySQL backend with the include and lib in /opt/mysql. "make" will build both libraries according to these settings. 2. Install the package The simplest way is to execute "make install" (as root) to copy the files to the default location. If you haven't changed this (./configure --help explains how to do this), they will be copied to /usr/local/include and /usr/local/lib. 3. Using the OpenDBX library If you've written a program interfacing the OpenDBX library, simply add -lopendbx as gcc parameter while linking your program. If the library isn't installed in one of the directories the library loader is searching for, you can either add the path to the LD_LIBRARY_PATH before execution of your programm or add add it to your /etc/ld.so.conf file and run ldconfig afterwards. 4. Create DEB and RPM packages The OpenDBX tarball is prepared to build distribution specific packages in DEB and RPM format. The Debian package is build by unpacking the tar file and invoking the following command in the OpenDBX directory on the command line: fakeroot debian/rules binary It will build the OpenDBX library and the mysql, pgsql, sqlite, sqlite3, firebird, mssql and sybase backends (the last two by using the FreeTDS library). Creating RPM packages is as easy as building the Debian package. Simply execute rpmbuild -ta opendbx-x.x.x.tar.gz with the correct name of the package file. This will build the OpenDBX library and the mysql, pgsql and sqlite3 backends by default. You can change the backends which will be build by supplying values to the --with=... and --without=... command line options available for the rpmbuild command, e.g. rpmbuild -ta --with=mssql --without=mysql --without=pgsql opendbx-x.x.x.tar.gz opendbx-1.4.6/opendbx.pc.in0000644000175000017500000000033511425153451012474 00000000000000prefix=@prefix@ exec_prefix=@exec_prefix@ libdir=@libdir@ includedir=@includedir@ Name: OpenDBX Description: Lightweight database abstraction layer Version: @VERSION@ Libs: -L${libdir} -lopendbx Cflags: -I${includedir} opendbx-1.4.6/ChangeLog0000644000175000017500000005401611765210747011674 000000000000002012-06-10 Norbert Sendetzky * Bugfix: Fixed memory leak in mysql backend when connecting to the server failed (thanks to Stefan Meinecke) * Bugfix: Fixed handling of NULL indicator in MSSQL backend if NULL is returned in a row * Bugfix: Added workaround for PostgreSQL in case of an error (e.g. if the server is gone) to give back a correct error status * Bugfix: Return ODBX_ROW_DONE in sqlite3_odbx_row_fetch() when calling this function after no more rows are available (due to SQLite3 change) * Bugfix: Added -lintl if required for fixing build problems when using MinGW on Windows platforms * Bugfix: Added ENABLE_BROKEN to Oracle descriptor for enabling keep-alive * Bugfix: Added unbind() to Conn::finish() if it's not called before * Bugfix: Increased buffer for time stamps in ODBC backend to allow fractions of seconds to be stored without an error * Feature: Enhanced determination of column types in SQLite3 backend when SQLite returns a NULL value * Feature: Improved recovery from errors in odbx-sql utility * Change: Updated libtool to 2.2.6b 2010-04-19 Norbert Sendetzky * Change: Changed required autoconf version to 2.61 * Change: Modified spec file to build firebird, mssql and sybase backends on supported plattforms by default * Bugfix: Fixed reference counting of objects in libopendbxplus (thanks to Rodolfo Lima) * Bugfix: Removed ODBC connection attributes which don't work with Windows ODBC * Bugfix: Fixed wrong error severity in mssql backend when connection couldn't be established * Bugfix: Fixed wild pointer in oracle backend that my lead to problems when error handling isn't implemented correctly * Bugfix: Fixed checking for highest error constant so last error message will be displayed correctly * Bugfix: Adapted spec file for OpenSUSE build service 2009-09-30 Norbert Sendetzky * Change: Changed mysql_real_connect options so odbx_rows_affected() is in line with other backends * Change: Don't set sql_mode in mysql backend if mode is an empty string (for MySQL < 4.1) * Bugfix: Fixed segmentation fault in mysql backend in threaded environments * Bugfix: Fixed mysql_real_connect options to keep options on reconnect * Bugfix: Fixed uninitialized variables in sqlite3 backend which may lead to a segfault * Bugfix: Cleanup connection in mysql backend if setting mode failed during odbx_bind() * Bugfix: Fixed several problems in RPM spec file 2009-09-02 Norbert Sendetzky * Bugfix: Fixed lost statements in sqlite3 backend if an error or a timeout occured * Bugfix: Fixed building dynamic firebird and mysql backend libraries on Windows platforms * Bugfix: Fixed pgsql backend support for timeouts in odbx_result() on Windows platforms * Bugfix: Fixed UTF-8 encoding of data in oracle backend on Windows platforms * Bugfix: Added workaround for RHEL and CentOS in spec file * Bugfix: Fixed spec file for building on x86_64 platform * Bugfix: Fixed used library for libopendbxplus * Bugfix: Fixed odbc package in spec file 2009-08-07 Norbert Sendetzky * Feature: Added MySQL MinGW workaround for easy compilation of MySQL backend on Windows plattforms * Bugfix: Removed old config.{cpp,hpp} files from generating gettext files * Bugfix: Use sqlite3_prepare_v2() for improved error management in sqlite3 backend * Bugfix: Fixed singlelib builds for mysql and interbase on Win32 * Bugfix: Fixed warning in firebird_odbx_error() 2009-06-02 Norbert Sendetzky * Feature: Added pkgconfig file for OpenDBX C++ library * Change: Moved C++ doc generation to "doc/" subdirectory * Bugfix: Fixed configure to build MySQL backend on Windows plattforms * Bugfix: Fixed masked global errno variable in MySQL backend * Bugfix: Check for -lz which might be necessary for MySQL backend * Bugfix: Fixed configure to build Oracle backend on Windows plattforms * Bugfix: Fixed configure to build Sybase backend on Windows plattforms * Bugfix: Correctly check for ODBC library on Windows plattforms * Bugfix: Used unitialized variable in Win32 DLL loader (thanks to Markus Fritsche) * Bugfix: Rewritten Win32 DLL loader to prevent problem with SQLite (thanks to Mariano Martinez Peck) * Bugfix: Fixed warning in firebird backend when using newer Firebird libraries * Bugfix: Check for Interbase gds32 library if fbclient isn't found * Bugfix: Fixed compilation of odbxtest on MacOSX (thanks to Michael Atkisson) * Bugfix: Added OpenDBX C++ libary to spec file 2009-03-02 Norbert Sendetzky * Feature: Use Doxygen for generating C++ API * Change: Fully documented C++ functions * Change: Specified thrown exceptions for all C++ functions * Change: Used interfaces for all C++ implementation classes * Change: Made C++ get*() functions in OpenDBX::Exception constant * Change: Made return value of Result::columnName() constant * Change: C++ implementation class variables are private now * Change: Used already existing C++ functions for functions with different parameter types * Change: Cleanup inside C++ API functions * Change: Added checks for libreadline and libncurses when the utilities should be build * Change: Added update statements in regression for testing statements which affects no rows * Bugfix: odbc_odbx_query() returned wrong code if a statement affected no rows (thanks to Mariano Martinez Peck) * Bugfix: Fixed memleak in mysql backend during finishing connections (thanks to Zhao Tongyi) * Bugfix: Fixed timeout calculation in sqlite3_odbx_query() (thanks to Mariano Martinez Peck) * Bugfix: Workaround for interupted select() call in pgsql backend (thanks to Mariano Martinez Peck) * Bugfix: Added destructor for Result_Impl class to clean up if an exception is thrown * Bugfix: Added checks for Conn::escape() functions if connection instance wasn't initialized correctly * Bugfix: Added copy constructors for all objects which are responsible for reference handling * Bugfix: Protect C++ objects against self assignment * Bugfix: Fixed build on windows with MinGW * Bugfix: odbx-sql can now be built without gettext * Bugfix: Added workaround necessary for building the odbc backend using MinGW * Bugfix: Missing Conn::unbind() in odbxplustest 2008-10-22 Norbert Sendetzky * Feature: Utilities and test suite is compiled by default but can be disabled via ./configure option * Feature: Increased gcc-4.3 compability (thanks to Sven Wegener) * Feature: Updated spec file and added packages for odbc backend and utilities * Feature: Added check for valid TLS options * Feature: Builds on Solaris * Change: Removed dependency on libconfuse using ArgMap * Change: Removed unnecessary include of sys/select.h in mysql backend * Change: Mssql backend is thread safe * Change: Used db2x command directly to generate man pages * Bugfix: Timeouts are now optional in pgsql backend so it compiles on Win32 platforms * Bugfix: Fixed severity level for error types in mssql backend (fix for FreeTDS for 0.82) * Bugfix: Oracle backend doesn't return an error if odbx_row_fetch() is called more often than necessary * Bugfix: Fixed memory leak in mssql backend which occured in odbx_finish() * Bugfix: Supports concurrent make jobs now while building RPM files * Bugfix: Builds cleanly on systems where an old version of the OpenDBX library is already installed 2008-06-12 Norbert Sendetzky * Feature: Builds on Win32 platform using Cygwin or MinGW * Feature: firebird, sqlite3 backend don't return an error if odbx_row_fetch() is called more often than necessary * Feature: Conn::finish(), Result::finish() and Lob::close() for cleaning up objects safely * Feature: odbx_query() can calculate the statement length on its own * Feature: Inline C++ API documentation (Javadoc style) * Feature: odbx-sql prints column names for result sets * Change: Moved type parameter in Conn::create() to the end and made it optional * Change: Made port in Conn::Conn() and who/cred in Conn::bind() optional * Change: Shortend and streamlined Exception methods * Change: odbx_result() uses constant instead of number * Bugfix: Fixed memory leak in sqlite3 backend if SQL statement is invalid * Bugfix: Fixed firebird and odbc backend when compiled as single lib * Bugfix: Added odbx-sql man page to install script * Bugfix: Cleanup in doc directories doesn't fail anymore if no files are available 2008-05-23 Norbert Sendetzky * Feature: Added auto completion of SQL keywords in odbx-sql * Feature: Fetch all outstanding rows in odbx_result_finish() * Feature: Man page for odbx_lo_*() functions and odbx_result_finish() * Feature: Man page for odbx-sql * Change: Made OpenDBX::Result::getResult() parameters optional * Change: Updated OpenDBX header in man pages * Bugfix: sqlite3 backend returns correct error message now if database file couldn't be opened * Bugfix: Fixed error type for invalid database files in sqlite3 backend * Bugfix: Frees all outstanding result sets in Result::~Result() now * Bugfix: Fixed memory leak in odbc_odbx_result_finish() * Bugfix: Correct temporal data types in odbc_odbx_column_type() when using PostgreSQL ODBC adapter * Bugfix: Added missing stdlib.h to odbc backend * Bugfix: Fixed delimters and separators in odbx-sql 2008-05-01 Norbert Sendetzky * Feature: Full-featured ODBC backend * Feature: Added Result::columnPos() function for mapping column names to positions * Change: Shortend column and field member function names in OpenDBX::Result * Bugfix: odbx_escape() didn't work anymore after the change in version 1.3.7 * Bugfix: sqlite3_get_option() returns correct value for ODBX_OPT_THREAD_SAFE * Bugfix: Fixed memory leak on timeout in sqlite3_odbx_result() * Bugfix: Fixed timeout handling in sqlite3 backend * Bugfix: Correct timeout value in sqlite backend 2008-04-05 Norbert Sendetzky * Feature: odbx_result_finish() can return error conditions and replaces odbx_result_free() * Feature: Added lob write function to lob extension for Firebird and Oracle * Feature: odbx-sql history remembers complete statements * Feature: Gettext support and german translation for odbx-sql * Feature: Extended regression testing for retrieving results and rows * Feature: Include C and C++ example application in regression test * Change: odbx_result_free() is now depricated * Change: Removed Stmt::bind() from libopendbxplus as it won't work with prepared stmt API * Change: Moved Stmt::escape() to Conn::escape() * Bugfix: Ported Bugfixes from release 1.2.5 * Bugfix: Escape backslashes as well in odbx_escape() default implementation * Bugfix: Class Odbx::Result() was able to cause a segfault on error conditions * Bugfix: Cleanup outstanding results in Odbx::~Result() if available * Bugfix: Correct order of backend library loading (user supplied first) * Bugfix: sqlite3_odbx_result() returned wrong code if called on finished statement * Bugfix: Timeout of odbx_result() works correctly in sqlite3 backend now * Bugfix: gettext works if locales are in non-standard directory * Bugfix: odbx-sql accessed already freed string * Bugfix: Fixed include and library path for odbx-sql * Bugfix: Added missing define for setenv() in oracle backend * Bugfix: Oracle backend returns correct error message if server is unavailable 2008-02-24 Norbert Sendetzky * Feature: New odbx-sql utility for execution of SQL statements from the shell * Feature: Richer API for libopendbxplus * Change: Moved opendbx/api.hpp to opendbx/api * Change: Switched parameter position for Conn::create() * Change: Changed signature for Stmt::bind() 2008-02-03 Norbert Sendetzky * Feature: ODBC backend prototype * Feature: Added header file names to ./configure error output if not found * Change: Fixed warnings displayed by new gcc compiler * Bugfix: wrong errors in odbx-regression.c were possible * Bugfix: removed unnecessary -ldl for backends and -lz for libmysqlbackend * Bugfix: documentation updates 2007-08-06 Norbert Sendetzky * Feature: C++ API for large object functions * Feature: added missing Conn::getCapability() * Feature: path to backend library can be supplied in backend parameter of odbx_init() * Feature: regression test for libopendbxplus * Change: odbx_lo_open() requires odbx_result_t* instead of odbx_t* * Change: changed visibility of libopendbxplus class variables to "protected" * Change: removed "lib/" in front of local header includes * Change: Added license statements to all files * Bugfix: pgsql backend returned wrong boolean values if odbx_field_value() is called twice * Bugfix: libopendbxplus exception returned wrong error 2007-07-09 Norbert Sendetzky * Feature: new C++ OpenDBX library (libopendbxplus) * Change: new directory layout for include files: /usr/include/opendbx/api.{h,hpp} * Bugfix: removed commas from the end of the enumerator lists 2007-06-07 Norbert Sendetzky * Feature: added enum declariations for all constants to enable strict type checking * Feature: defined constants for odbx_result and odbx_row_fetch return values * Feature: added support for new MySQL decimal type in mysql backend * Feature: added Docbook documentation from OpenDBX 1.2.3 package * Bugfix: fixed memory leak in firebird backend lob implementation 2007-03-28 Norbert Sendetzky * Feature: added large object interface (read-only) * Feature: firebird backend supports lob interface * Change: refactored backends in interface, basic and "large object" parts * Change: replaced stdint.h by inttypes.h and removed config.h dependency in odbx.h 2007-03-11 Norbert Sendetzky * Feature: update from latest stable branch * Feature: added option --enable-singlelib to build one library including the backends * Feature: library and api version are available via odbx_get_option() * Feature: mysql backend supports socket connections via host string * Feature: mssql, mysql, pgsql and sybase backends support connection timeout via odbx_{get,set}_option() * Feature: mssql backend works with FreeTDS 0.63 but without ANSI features * Feature: mssql backend supports timeouts for odbx_result() * Change: added new error code for invalid handles (severe error type) * Change: odbx_error_type() returns success for returned values greater than zero * Bugfix: fixed decimal type in firebird backend * Bugfix: fixed date type in mssql backend 2007-01-20 Norbert Sendetzky * Feature: only configured backends are used with ODBX_STATIC * Bugfix: wrong sqlite3 define in configure.ac 2006-12-20 Norbert Sendetzky * Feature: updated language files, German translation * Bugfix: fixed warnings in Oracle backend 2006-12-09 Norbert Sendetzky * Feature: updated spec file * Feature: check for memset function * Bugfix: sqlite3_odbx_result() created an infinite loop if a backend error occured * Bugfix: removed memleak in sqlite_odbx_finish() and sqlite3_odbx_finish() * Bugfix: removed memleak in mysql_set_privmode() * Bugfix: added missing free in firebird_odbx_finish() 2006-10-14 Norbert Sendetzky * Feature: mssql backend optimization * Feature: sybase backend optimization * Feature: mysql backend supports ODBX_TLS_TRY * Feature: host is optional in firebird backend * Change: code cleanups in several backends * Change: compares pointer always to NULL * Change: replaced ODBX_* types by ODBX_TYPE_* * Bugfix: fixed off by one bug in odbx_escape() * Bugfix: pgsql backend returned wrong code for empty queries * Bugfix: uninitialized host variable in mysql_odbx_init() if host was NULL 2006-09-23 Norbert Sendetzky * Feature: Oracle backend for OCI 8, 9 and 10 * Feature: compiles now on Solaris * Feature: updated configure.ac and more checks 2006-09-09 Norbert Sendetzky * Bugfix: firebird backend failed on parameter checking in firebird_odbx_bind() * Bugfix: fixed length of malloc()'ed columns in firebird backend * Feature: new sybase backend for Sybase ASE servers * Feature: ARRAY type support for pgsql * Change: renamed freetds backend (using dblib) to mssql * Change: introduced ODBX_TYPE_* for further use * Change: removed ODBX_DEPRICATED for now 2006-08-25 Norbert Sendetzky * Bugfix: fixed clash with errno function in odbx.h * Bugfix: freetds backend checks for NULL pointer in message and error handler * Bugfix: freetds backend returns correct number of affected rows * Bugfix: freetds backend date/time/timestamp were not in ISO format * Bugfix: altered check for freetds in configure (freetds' libsybdb doesn't always provide the dbopen symbol) * Bugfix: firebird backend checks for max. number of nested transactions * Bugfix: firebird backend fixes bug in host/port init code * Feature: support for different modes in backends (SQL, ANSI SQL, proprietary, etc) * Feature: MySQL server operates in ANSI SQL mode by default * Feature: freetds (MSSQL/Sybase) server operate in ANSI SQL mode by default (dates and identifier quotes) * Feature: freetds backend compiles with Sybase dblib library * Feature: firebird backend uses isolation level "read committed" by default 2006-08-10 Norbert Sendetzky * Bugfix: fixed segfault when odbx_finish() is called (thanks to Clizio Merli) * Bugfix: pgsql backend boolean values return now 1/0 instead of true and false * Bugfix: pgsql backend wasn't aware of clob types * Bugfix: mysql backend didn't distinguish between clob and blob types * Bugfix: firebird backend failed on using transactions * Bugfix: firebird backend returned wrong type for CHAR columns * Bugfix: firebird backend formating for decimal values was wrong * Bugfix: firebird backend date, time and timestamp values were not strings in ISO format * Bugfix: odbxtest works without installed libraries and with disabled static build * Feature: added odbxtest.* scripts for regression tesing * Change: odbx_field_bind() was removed because it couldn't be supported by all backends 2006-07-03 Norbert Sendetzky * Feature: firebird backend is fully functional * Feature: odbx_error_type() function to distinguish fatal/non-fatal errors * Change: odbx_field_bind() is subject to change in the next release 2006-06-27 Norbert Sendetzky * Bugfix: package contains a working spec file * Feature: provides generic escape implementation for backends * Feature: Win32 DLL loader support (who's able to provide a MSVC project file?) * Change: introduced ODBX_DEPRICATED to hide depricated functions by default * Change: reworked autoconf/automake support * Change: Streamlined defines * Change: Update from stable branch 2006-06-10 Norbert Sendetzky * New: FreeTDS backend (MSSQL and Sybase support) * New: Firebird backend prototype (with limited functionality up to now) * New: odbx_bind() for supporting different bind methods in the future * New: odbx_field_bind() for providing binary values directly * Change: odbx_bind_simple() is set to depricated * Change: Update from stable branch 2006-03-19 Norbert Sendetzky * Bugfix: FreeBSD fix for dynamic linking (libdl) * Bugfix: Used freed memory in mysql_bind_simple() after rebinding * Feature: MySQL host and port are now optional 2006-01-26 Norbert Sendetzky * Feature: Localization (gettext) support * Bugfix: odbx_finish() returns more error codes for different types of errors * Change: Minor cleanups 2005-12-31 Norbert Sendetzky * Bugfix: The OBBX_ERR_BACKEND define was definitively wrong * Bugfix: Additional check for handle and backend in odbx_init() * Feature: ISO C99 clean and no more warnings in -pedantic mode * Feature: Use of defines for error codes in all backends 2005-10-01 Norbert Sendetzky * API Change: SQL2003 data types are now returned by odbx_field_type() * API Change: odbx_field_{count,name,type}() are renamed to odbx_column_{count,name,type}() for clarification * Change: functions were renamed to *_odbx_*() instead of e.g. mysql_*() to prevent name clashes * Bugfix: mysql data structure was uninitialized when calling mysql_odbx_set_option() * Bugfix: Added mysql_thread_end() in mysql_odbx_finish() to prevent memory leaks 2005-09-15 Norbert Sendetzky * Bugfix: mysql_field_length() returned the length of the column, not the length of the current field * Bugfix: (char*) to (const char*) {pgsql,sqlite}_field_name() and {pgsql,sqlite}_field_value() * Feature: use libmysqlclient_r if present * Feature: pkgconfig file is included 2005-08-04 Norbert Sendetzky * Bugfix: NULL value handling in pgsql module * Minor api change: changed return value for odbx_field_name() and odbx_field_value() from (char*) to (const char*) 2005-07-17 Norbert Sendetzky * SQLite3 support 2004-08-18 Norbert Sendetzky * Double delete in odbx:mysql_finish() caused segfault on PowerPC * Moved mysql_init() to odbx:mysql_bind_simple(), prevented rebinding 2004-08-02 Norbert Sendetzky * SQLite support * Improved error handling * PostgreSQL backend fix: Empty result caused infinite loop * Removed libltdl (not thread safe), used custom way instead OpenDBX 0.8: - libtool libltdl support for portability - enhanced error checking - deb build scripts and rpm spec OpenDBX 0.7: - get/set option support - SSL support in mysql and pgsql backends OpenDBX 0.6: - support for conditional builds OpenDBX 0.5: - MySQL support OpenDBX 0.4: - support for querying backend capabilities - pgsqlbackend code cleanup OpenDBX 0.3: - minimized visible library symbols OpenDBX 0.2: - autoconf, automake and libtool to simplify builds OpenDBX 0.1: - initial release - PostgreSQL support opendbx-1.4.6/doc/0000755000175000017500000000000011765214162010734 500000000000000opendbx-1.4.6/doc/Makefile.in0000644000175000017500000004026111765211301012714 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = Doxyfile CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man3dir = $(mandir)/man3 am__installdirs = "$(DESTDIR)$(man3dir)" NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ EXTRA_DIST = opendbx.en.xml @ENABLEMAN_TRUE@man_MANS = \ @ENABLEMAN_TRUE@ odbx_bind.3 \ @ENABLEMAN_TRUE@ odbx_capabilities.3 \ @ENABLEMAN_TRUE@ odbx_column_count.3 \ @ENABLEMAN_TRUE@ odbx_column_name.3 \ @ENABLEMAN_TRUE@ odbx_column_type.3 \ @ENABLEMAN_TRUE@ odbx_error.3 \ @ENABLEMAN_TRUE@ odbx_error_type.3 \ @ENABLEMAN_TRUE@ odbx_escape.3 \ @ENABLEMAN_TRUE@ odbx_field_length.3 \ @ENABLEMAN_TRUE@ odbx_field_value.3 \ @ENABLEMAN_TRUE@ odbx_finish.3 \ @ENABLEMAN_TRUE@ odbx_get_option.3 \ @ENABLEMAN_TRUE@ odbx_init.3 \ @ENABLEMAN_TRUE@ odbx_query.3 \ @ENABLEMAN_TRUE@ odbx_result.3 \ @ENABLEMAN_TRUE@ odbx_result_finish.3 \ @ENABLEMAN_TRUE@ odbx_row_fetch.3 \ @ENABLEMAN_TRUE@ odbx_rows_affected.3 \ @ENABLEMAN_TRUE@ odbx_set_option.3 \ @ENABLEMAN_TRUE@ odbx_unbind.3 \ @ENABLEMAN_TRUE@ odbx_lo_open.3 \ @ENABLEMAN_TRUE@ odbx_lo_close.3 \ @ENABLEMAN_TRUE@ odbx_lo_read.3 \ @ENABLEMAN_TRUE@ odbx_lo_write.3 \ @ENABLEMAN_TRUE@ man/man3/OpenDBX.3 \ @ENABLEMAN_TRUE@ man/man3/OpenDBX_Conn.3 \ @ENABLEMAN_TRUE@ man/man3/OpenDBX_Exception.3 \ @ENABLEMAN_TRUE@ man/man3/OpenDBX_Lob.3 \ @ENABLEMAN_TRUE@ man/man3/OpenDBX_Result.3 \ @ENABLEMAN_TRUE@ man/man3/OpenDBX_Stmt.3 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man3: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)" @list=''; test -n "$(man3dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.3[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ done; } uninstall-man3: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man3dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.3[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man3dir)" && rm -f $$files; } tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man3dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." @ENABLEMAN_FALSE@clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man3 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man3 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-man3 \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-man uninstall-man3 @ENABLEMAN_TRUE@odbx_bind.3 odbx_capabilities.3 odbx_column_count.3 odbx_column_name.3 odbx_column_type.3 odbx_error.3 odbx_error_type.3 odbx_escape.3 odbx_field_length.3 odbx_field_value.3 odbx_finish.3 odbx_get_option.3 odbx_init.3 odbx_query.3 odbx_result.3 odbx_result_finish.3 odbx_row_fetch.3 odbx_rows_affected.3 odbx_set_option.3 odbx_unbind.3 odbx_lo_open.3 odbx_lo_close.3 odbx_lo_read.3 odbx_lo_write.3: opendbx.en.xml @ENABLEMAN_TRUE@ db2x_xsltproc -s man opendbx.en.xml | db2x_manxml --solinks @ENABLEMAN_TRUE@man/man3/OpenDBX.3 man/man3/OpenDBX_Conn.3 man/man3/OpenDBX_Exception.3 man/man3/OpenDBX_Lob.3 man/man3/OpenDBX_Result.3 man/man3/OpenDBX_Stmt.3: ../lib/opendbx/api @ENABLEMAN_TRUE@ doxygen Doxyfile > /dev/null @ENABLEMAN_TRUE@clean: @ENABLEMAN_TRUE@ for file in `ls odbx_*.3 2>/dev/null`; do rm -f $$file; done @ENABLEMAN_TRUE@ rm -rf html man xml # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/doc/Makefile.am0000644000175000017500000000266311425153451012713 00000000000000EXTRA_DIST = opendbx.en.xml if ENABLEMAN odbx_bind.3 odbx_capabilities.3 odbx_column_count.3 odbx_column_name.3 odbx_column_type.3 odbx_error.3 odbx_error_type.3 odbx_escape.3 odbx_field_length.3 odbx_field_value.3 odbx_finish.3 odbx_get_option.3 odbx_init.3 odbx_query.3 odbx_result.3 odbx_result_finish.3 odbx_row_fetch.3 odbx_rows_affected.3 odbx_set_option.3 odbx_unbind.3 odbx_lo_open.3 odbx_lo_close.3 odbx_lo_read.3 odbx_lo_write.3: opendbx.en.xml db2x_xsltproc -s man opendbx.en.xml | db2x_manxml --solinks man/man3/OpenDBX.3 man/man3/OpenDBX_Conn.3 man/man3/OpenDBX_Exception.3 man/man3/OpenDBX_Lob.3 man/man3/OpenDBX_Result.3 man/man3/OpenDBX_Stmt.3: ../lib/opendbx/api doxygen Doxyfile > /dev/null clean: for file in `ls odbx_*.3 2>/dev/null`; do rm -f $$file; done rm -rf html man xml man_MANS = \ odbx_bind.3 \ odbx_capabilities.3 \ odbx_column_count.3 \ odbx_column_name.3 \ odbx_column_type.3 \ odbx_error.3 \ odbx_error_type.3 \ odbx_escape.3 \ odbx_field_length.3 \ odbx_field_value.3 \ odbx_finish.3 \ odbx_get_option.3 \ odbx_init.3 \ odbx_query.3 \ odbx_result.3 \ odbx_result_finish.3 \ odbx_row_fetch.3 \ odbx_rows_affected.3 \ odbx_set_option.3 \ odbx_unbind.3 \ odbx_lo_open.3 \ odbx_lo_close.3 \ odbx_lo_read.3 \ odbx_lo_write.3 \ man/man3/OpenDBX.3 \ man/man3/OpenDBX_Conn.3 \ man/man3/OpenDBX_Exception.3 \ man/man3/OpenDBX_Lob.3 \ man/man3/OpenDBX_Result.3 \ man/man3/OpenDBX_Stmt.3 endif opendbx-1.4.6/doc/opendbx.en.xml0000644000175000017500000027757511425153451013461 00000000000000 OpenDBX Norbert Sendetzky norbert@linuxnetworks.de OpenDBX reference pages odbx_bind 3 odbx_bind odbx_bind_simple User authentication for a database connection #include <opendbx/api.h> int odbx_bind odbx_t* handle const char* database const char* who const char* cred int method int odbx_bind_simple odbx_t* handle const char* database const char* who const char* cred Description odbx_bind() associates a connection created by odbx_init() to a specific database after the server verified and accepted the user credentials. All further operations will (normally) only affect the tables and records within this database. The operations may be limited to certain subset depending on the privileges granted to the given user account. If binding to the database instance succeeded, odbx_bind() also enables compatibility to the ANSI SQL standard if this is possible for the database server implementation. odbx_bind_simple() performs the same tasks as odbx_bind() but can't do anything else than simple user name / password authentication. It shouldn't be used in applications linking to the OpenDBX library version 1.1.1 or later and it will be removed from the library at a later stage. Both functions accept almost the same parameters. The handle parameter always has to be a pointer to a valid connection object allocated by odbx_init(). The availability of certain options or the behavior of the connection associated to the given odbx_t pointer can be queried by calling odbx_get_option() respectively changed by odbx_set_option(). Changes must be done before calling odbx_bind() to take any effect. Examples of options are the thread-safetiness of the native database client library or the support for sending multiple statements at once. database is necessary to let the database server know which database should be used for executing all further requests. In combination with the authentication parameters who and cred, it usually allows or denies operations on tables and records within this database. Contrary to that, SQLite doesn't use who and cred but relies on the file system permissions instead to grant access to the whole database file. If they are used, the supplied values for all three parameters must be zero-terminated strings and should be in exactly the same character case as stored by the database manager. Otherwise, if they are unused they can also be NULL. Some database libraries also support default values provided by a configuration file if a parameter is NULL. method specifies the mechanism for authenticating a user account before it can perform operations on tables and records. Currently, all database backend modules only support the ODBX_BIND_SIMPLE method which provides basic user name / password authentication. In this case, the parameter who must be the name of an user account while cred has to be the password that belongs to the given account. An already associated connection object can be detached from the database and rebound to the same database server. It is possible to bind it to another database, with another user account and other options set by detaching the connection object with odbx_unbind() first before invoking odbx_bind() with the same or with different parameters again. Return value odbx_init() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The backend module returned an error because it couldn't connect to the database or the authentication using the supplied parameters failed -ODBX_ERR_PARAM One of the supplied parameters is invalid or is NULL and this isn't allowed in the used backend module or in the native database client library -ODBX_ERR_NOMEM Allocating additionally required memory failed -ODBX_ERR_SIZE The length of a string exceeded the available buffer size -ODBX_ERR_NOTSUP The supplied authentication method is not supported by the backend module See also odbx_error() odbx_error_type() odbx_init() odbx_query() odbx_unbind() odbx_capabilities 3 odbx_capabilities Query implemented capabilities #include <opendbx/api.h> int odbx_capabilities odbx_t* handle unsigned int cap Description odbx_capabilities() ask the backend associated to the connection object returned by odbx_init() if a certain capability set is implemented by this backend. All backends have to implement the basic capability set and may implement further predefined functional sets if they are supported by the native database client library. This function can be called at any stage after odbx_init() returned successfully. The first parameter handle has to be the connection object created and returned by odbx_init(). It becomes invalid as soon as it was supplied to odbx_finish() and odbx_capabilities() will return an error in this case. cap is the number of the capability set as defined by macro constants in odbx.h. Valid constant names which can be supplied as second parameter to odbx_capabilities() are listed below: -ODBX_CAP_BASIC The core function set which have to be implemented by all backends. It consists of all functions necessary to connect to, send textual queries to and process simple results returned from the database server as well as error handling functions. Return value odbx_capabilities() returns ODBX_ENABLE if the requested capability is supported, ODBX_DISABLE if the capability is not supported or an error code whose value is less than zero if one of the supplied parameters is invalid. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_PARAM handle is NULL or the supplied connection object is invalid See also odbx_error() odbx_error_type() odbx_init() odbx_column_count 3 odbx_column_count Get the number of columns in the current result set #include <opendbx/api.h> int odbx_column_count odbx_result_t* result Description Returns the number of columns which belongs to the current result set allocated by odbx_result(). The number will never change within a result set with one notable exception: MySQL returns all outstanding rows of a previous result set first if they were not fetched completely by odbx_row_fetch() before. Therefore, the column count might change in this special situation. It is strongly advised to fetch all rows of a result set before calling odbx_result() again because other backends will return an error in this case. The result parameter required by this function must be a valid result set returned by odbx_result() and must not has been feed to odbx_result_finish() before. Return value odbx_column_count() returns the number of columns/fields which are available in the current result set. The value depends on the column list being part of the SELECT query and it is zero if the query wasn't a SELECT-like query. Errors This function will also return zero if the result parameter is invalid. See also odbx_column_name() odbx_column_type() odbx_result() odbx_column_name 3 odbx_column_name Get the name of a column in the current result set #include <opendbx/api.h> char* odbx_column_name odbx_result_t* result unsigned long pos Description odbx_column_name() gets the name of the column specified by pos in the current result set returned by odbx_result(). The column names will not change within the result set with the exception described for MySQL in odbx_column_count() when the first result set wasn't retrieved completely before odbx_result() was called again. The result parameter required by this function must be a valid result set returned by odbx_result() and must not have been feed to odbx_result_finish() before. Valid column indices for the requested column provided via pos start with zero and end with the value returned by odbx_column_count() minus one. Return value The return value of odbx_column_name() is a pointer to a zero terminated string which consists of the name of the requested column. This pointer is allocated by the database client library and must not be freed by the application. The content of the string may be overwritten by the next call to odbx_column_name() Errors Errors can occur if the given result parameter is NULL or invalid or if the value of pos is out of range, i.e. more than odbx_column_count() minus one. See also odbx_column_count() odbx_column_type() odbx_result() odbx_column_type 3 odbx_column_type Returns the SQL data type of a column in the current result set #include <opendbx/api.h> int odbx_column_type odbx_result_t* result unsigned long pos Description odbx_column_type() returns the data type of the requested column within the current result set returned by odbx_result(). The column type applies to all fields at the same position of the rows fetched via odbx_row_fetch(). The definitions are based on the SQL2003 standard and the data types of the database server have to comply to the specification of the standard. Data types provided by database implementations which are not covered by the SQL2003 standard are subsumed as ODBX_TYPE_UNKNOWN. The result parameter required by this function must be a valid result set returned by odbx_result() and must not has been feed to odbx_result_finish() before. Valid column indices for the requested column provided via pos start with zero and end with the value returned by odbx_column_count() minus one. Return value If a values less than zero is returned, an error occurred. Possible error codes are listed in the error section and the application can retrieve a textual message of the error by calling odbx_error(). A positive return value including zero indicates one of the SQL2003 compliant data types listed below. Before release 1.1.5 of the OpenDBX library, types were defined as ODBX_* instead of ODBX_TYPE_*. The old definitions are kept for backward compatibility but shouldn't be used any more. They will be removed at some point in the future. Exact numeric values: ODBX_TYPE_BOOLEAN: True/false values ODBX_TYPE_SMALLINT: Signed 16 bit integer ODBX_TYPE_INTEGER: Signed 32 bit integer ODBX_TYPE_BIGINT: Signed 64 bit integer ODBX_TYPE_DECIMAL: Exact signed numeric values with user defined precision Approximate numeric values: ODBX_TYPE_REAL: Approximate numeric values (signed) with 32 bit precision ODBX_TYPE_DOUBLE: Approximate numeric values (signed) with 64 bit precision ODBX_TYPE_FLOAT: Approximate numeric values (signed) with user defined precision String values: ODBX_TYPE_CHAR: Fixed number of characters ODBX_TYPE_NCHAR: Fixed number of characters using a national character set ODBX_TYPE_VARCHAR: Variable number of characters ODBX_TYPE_NVARCHAR: Variable number of characters using a national character set Large objects: ODBX_TYPE_CLOB: Large text object ODBX_TYPE_NCLOB: Large text object using a national character set ODBX_TYPE_XML: XML tree in text format ODBX_TYPE_BLOB: Large binary object Date and time values: ODBX_TYPE_TIME: Time including hours, minutes and seconds ODBX_TYPE_TIME_TZ: Time with timezone information ODBX_TYPE_TIMESTAMP: Date and time ODBX_TYPE_TIMESTAMP_TZ: Date and time with timezone information ODBX_TYPE_DATE: Date including year, month and day ODBX_TYPE_INTERVAL: Date interval Arrays and sets: ODBX_TYPE_ARRAY: Array of values ODBX_TYPE_MULTISET: Associative arrays External links: ODBX_TYPE_DATALINK: URI locators like URL links Vendor specific: ODBX_TYPE_UNKNOWN: Vendor specific data type without representation in SQL2003 Errors -ODBX_ERR_BACKEND The native database library returned an error -ODBX_ERR_PARAM Either the result parameter is NULL respectively is invalid or the value of pos is out of range See also odbx_column_count() odbx_column_name() odbx_field_value() odbx_result() odbx_error 3 odbx_error Returns a human readable error message #include <opendbx/api.h> char* odbx_error odbx_t* handle int error Description odbx_error() returns an error string corresponding to the supplied error code or the error string generated by the native database library. Error strings originating from the backend modules or the native database client libraries are cleared as soon as the next odbx_*() function is called. All error strings are statically allocated and must not be changed or freed. If the OpenDBX library is compiled with native language support and the user environment variables are set accordingly to a supported language, strings which are part of the OpenDBX library are translated before being returned. This may also be the case for strings returned by the native database libraries but depends on their support. The first parameter handle is the connection object created and returned by odbx_init() which becomes invalid as soon as it was supplied to odbx_finish(). Anyhow, it isn't necessary to supply a valid handle for errors which use error codes not equal to -ODBX_ERR_BACKEND because they are returned directly from a static error message array. Therefore, it's possible to use odbx_error() even if odbx_init() wasn't successful. If -ODBX_ERR_BACKEND is supplied in this case nevertheless, the return error string will be the same as for an invalid handle. Almost all OpenDBX library functions return an error code if one of the operations couldn't be completed successfully. The codes returned use values less than zero to indicate different kind of errors and these values can be directly passed to odbx_error() to obtain the corresponding zero-terminated error string. Return value odbx_error() returns a zero-terminated string suitable for being displayed to the user of the application. Errors If an backend error occurred and handle is NULL or the supplied connection object is invalid, odbx_error() returns the localized string for -ODBX_ERR_PARAM. See also odbx_error_type() odbx_init() odbx_error_type 3 odbx_error_type Returns the severity of an error #include <opendbx/api.h> int odbx_error_type odbx_t* handle int error Description odbx_error_type() gives an indication about the severity of the error code returned by the last function call and supplied via the error parameter. It can be used to distinguish critical errors from warnings and enables an application to react appropriately. While applications usually can continue if warnings occur by informing the user and taking measures on the application logic level, severe errors always require to recreate the connection. On both cases, all errors returned are overwritten when the next odbx_*() function is called. This function is available since release 1.1.2. Let's take odbx_query() (or any other function) as example, which returned an error. If the return value of odbx_error_type() is negative, you've hit a severe error like the connection to the server is broken. In this case you have to call odbx_unbind(), odbx_finish(), odbx_init() and odbx_bind() in this order to recreate the connection. Otherwise, if the return value was positive your statement might have been not understood by the database server. Here you can continue to send the next statement to the server without the need to recreate the connection. The handle parameter is the connection object created and returned by odbx_init() if the call was successful and it becomes invalid as soon as it was supplied to odbx_finish(). Anyhow, it isn't necessary to supply a valid handle for errors which use error codes not equal to -ODBX_ERR_BACKEND. Therefore, it's possible to use odbx_error_type() even if odbx_init() returned an error. If -ODBX_ERR_BACKEND is supplied in this case nevertheless, the return value will indicate a critical error. All values returned by odbx_*() functions can be feed directly via the error parameter into this function. If the given value doesn't indicate an error, the returned code will always be zero for successful completion. Negative values will be separated into classes for critical errors and warnings instead. Return value On success, i.e. if ODBX_ERR_SUCCESS or a positive value is supplied as value of error, the function returns zero. Otherwise, there will be positive and negative values returned, depending on the severity of the error occurred. Positive values (values greater than zero) indicate recoverable errors which leave the database connection intact. An example might be a warning if a record couldn't be inserted into the table for any reason. In this case, further statements can be send to the database server and they are likely to succeed. On the other hand, if negative values (values less than zero) are returned, there has happened a severe error in the backend module, the native database client library or the database server. The connection to the server might be lost or an out of memory condition might has been occurred. This means that all further calls to the OpenDBX library will probably fail and the only way to recover from this situation is to clean up the connection by using odbx_unbind() and odbx_finish() and trying to create a new connection from ground up. Errors This function doesn't return any errors. See also odbx_finish() odbx_init() odbx_unbind() odbx_escape 3 odbx_escape Prepare strings for inclusion in statements #include <opendbx/api.h> int odbx_escape odbx_t* handle const char* from unsigned long fromlen char* to unsigned long* tolen Description odbx_escape() neutralizes potentially dangerous characters of the string so it can be used as part of a statement. For security reasons every user input has to be passed to odbx_escape() to avoid SQL injection attacks which can have fatal consequences! It's also a good idea to escape strings returned from database fields again if you want to use them in a query because they don't stay escaped once they are returned as part of a record. Most backends require the buffer to be more than twice as long as the input string. To be precise, the output buffer must be 2 * size of input + 1 bytes long. After successfully escaping the characters in from, they are written into the memory provided via to and the value/result parameter tolen is updated to the new length of to in the end. The first parameter handle is the connection object created and returned by odbx_init() which becomes invalid as soon as it was supplied to odbx_finish(). from has to point to a character string containing the string which should be used as part of a statement. It doesn't have to be zero-terminated because the length of it is also given via fromlen. The backends may support variable width character sets like UTF-8 but this function doesn't support the wide char type (wchar_t) where each character has a fixed size of two or four bytes. The value of the parameter fromlen must be the length in bytes of the string which from is pointing to. This is also true for variable width character sets like UTF-8 but the wide char type (wchar_t) is not supported. The terminating \0 character shouldn't be part of fromlen. The calling function provides a buffer for storing the escaped string via to. In general, the length of the buffer should be more than twice as long as the string passed via from to be able to store the escaped string even if every character has to be escaped. tolen is a value-result parameter which points to an integer variable in the calling function. It must contain the original length of the buffer given via to and if escaping the string in from suceeded, odbx_escape() will store the new length of the escaped string in this variable. Return value odbx_escape() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library returned an error because it wasn't able to escape the given string to be suitable for a statement -ODBX_ERR_PARAM One of the supplied parameters is invalid or is NULL and this isn't allowed in the used backend module or in the native database client library -ODBX_ERR_SIZE The length of the escaped string exceeds or is likely to exeed the available buffer (before 1.1.4 the name of the label was ODBX_ERR_TOOLONG but the value is still the same) See also odbx_error() odbx_error_type() odbx_query() odbx_field_length 3 odbx_field_length Returns the length of a field value #include <opendbx/api.h> unsigned long odbx_field_length odbx_result_t* result unsigned long pos Description odbx_field_length() returns the length of the field value in bytes. The field is part of the current row which was retrieved by the latest call to odbx_row_fetch() and is specified by the column index given by pos. The result parameter required by this function must be a valid result set returned by odbx_result() and must not has been feed to odbx_result_finish() before. Valid column indices for the requested column provided via pos start with zero and end with the value returned by odbx_column_count() minus one. Return value The odbx_field_length() function provides the number of bytes of the specified field to the caller. If the field value consists of character data, the returned length will be without the terminating zero character. For binary values the exact size of the block as stored in the database is returned. Errors This function will also return zero if the result parameter is invalid or if the value of pos is out of range. See also odbx_field_value() odbx_result() odbx_field_value 3 odbx_field_value Returns the data stored in a field #include <opendbx/api.h> const char* odbx_field_value odbx_result_t* result unsigned long pos Description odbx_field_value() returns a pointer to the field data specified by the column index pos. The field is part of the current row which was retrieved by the latest call to odbx_row_fetch(). All values except binary objects are handed back as strings terminated by the zero character. This does also apply to numeric values, dates, etc. They have to be converted to their binary machine dependent representation before arithmetic operations can be done. If a value is undefined, i.e. "NULL" is attached to the field in the database, an equivalent NULL pointer is returned. The result parameter required by this function must be a valid result set returned by odbx_result() and must not has been feed to odbx_result_finish() before. Valid column indices for the requested column provided via pos start with zero and end with the value returned by odbx_column_count() minus one. Return value The function provides the address pointing to the beginning of the field value where the string or binary object is stored in memory to the caller. It returns a NULL pointer if the field is a "NULL" value. Errors This function will also return zero if the result parameter is invalid or if the value of pos is out of range. See also odbx_column_type() odbx_field_length() odbx_result() odbx_finish 3 odbx_finish Frees connection resources #include <opendbx/api.h> int odbx_finish odbx_t* handle Description odbx_finish() is responsible for freeing all resources allocated by odbx_init() and finally may shut down the connection to the database server. It must not be invoked before calling odbx_unbind() to avoid memory leaks and open connection descriptors on the client and server side which may block necessary resources later on. The handle parameter has to be the connection object created and returned by odbx_init(). It becomes invalid after it was supplied to odbx_finish() for the first time and the function will return an error for all further invocations. Return value odbx_finish() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if handle is invalid or one of the operations couldn't be completed successfully by the backend module. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_PARAM handle is NULL or the supplied connection object is invalid See also odbx_error() odbx_error_type() odbx_init() odbx_unbind() odbx_get_option 3 odbx_get_option Query backend for implemented options #include <opendbx/api.h> int odbx_get_option odbx_t* handle unsigned int option void* value Description odbx_get_option() asks the backend module associated to handle by odbx_init() for implemented options and their current values. This function can be used at every stage as long as handle points to a valid connection object. Its primary use is to find out supported features of the backend module and to enable them with odbx_set_option() before the connection to the database server is established by calling odbx_bind(). The first parameter handle is the connection object created and returned by odbx_init() which becomes invalid as soon as it was supplied to odbx_finish(). There are several option values defined as named constants in the odbx.h header file. A few of them are for informational purpose only while most of the options can also be set to different option values by odbx_set_option() to change the behavior of the backend module. The available options are: ODBX_OPT_API_VERSION The API version implemented by the backend. Currently, it returns only zero and is reserved for the future ODBX_OPT_THREAD_SAFE If it is safe to use this backend and especially the native database client library in an application which uses threads where more than one thread opens database connections via the OpenDBX library ODBX_OPT_TLS The database client library may support transmitting all data securely by encrypting the network traffic via SSL or TLS ODBX_OPT_MULTI_STATEMENTS The database server may be able to support multiple SQL statements in one query string sent via odbx_query() ODBX_OPT_PAGED_RESULTS All database servers and client libraries are able to transfer the records row by row. Some of them can also transfer multiple rows or even all at once to minimize server load, network traffic and latency. The downside of this is an increased memory consumption ODBX_OPT_COMPRESS Support of compressed network traffic between database client and server. This can lead to higher throughput if the network is the bottleneck ODBX_OPT_MODE Some database servers support different modes of operation, e.g. modes for compliance to other SQL implementations or completely different query languages. This option is available since OpenDBX 1.1.4 value must be a pointer to an integer variable where the backend module will store the result for the supplied option. If it's not stated otherwise, the value assigned to the value parameter by odbx_get_option() will be of boolean nature and therefore is ODBX_ENABLE for a supported option or ODBX_DISABLE for an option which isn't supported. Return value odbx_get_option() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_PARAM One of the supplied parameters is invalid or is NULL and this isn't allowed in the used backend module or in the native database client library -ODBX_ERR_OPTION The value passed to the option parameter isn't one of the values listed in this manual. The content of value remains unchanged if this error occurs See also odbx_bind() odbx_error() odbx_error_type() odbx_init() odbx_set_option() odbx_init 3 odbx_init Allocate per connection data structures #include <opendbx/api.h> int odbx_init odbx_t** handle const char* backend const char* host const char* port Description odbx_init() allocates and initializes an opaque object required for all further operations within the OpenDBX library which is used to identify the connection and to maintain per connection information. Depending on the backend it can open a connection to the database server but often this is done not until performing authentication through odbx_bind(). The pointer of the newly allocated connection object is stored in handle if odbx_init() completes successfully. Otherwise, the value of the handle variable will be undefined and must not be used as input for other functions of the library. The returned connection object must be freed by odbx_finish() to avoid memory leaks if it will be no longer used by the application. The OpenDBX library provides access to several different database implementations through a single interface and therefore has to know which one of the available backend modules it should use for the operations. The backend parameter will be used to perform the lookup of the requested module. It has to be a zero-terminated ASCII string with all characters in in lower case. Currently, these backend modules are available: firebird (Firebird/Interbase) mssql (MS SQL Server via FreeTDS) mysql (MySQL) oracle (Oracle 8i/9i/10g) pgsql (PostgreSQL) sqlite (SQLite v2) sqlite3 (SQLite v3) sybase (Sybase ASE) Connecting to a database server requires at least an identifier to know where the database is located. There are several kinds of identifiers like host names, IP addresses, named pipes, etc. which could be used. One of them can be provided via the host parameter and it is up to the native database library what it will accept. Most native libraries accept at least host names and IP addresses and also use the provided port in this case. The available methods for host are: host name string supported by Firebird/Interbase, MySQL, Oracle and PostgreSQL backends IP address string supported by Firebird/Interbase, MySQL, Oracle and PostgreSQL backends absolute path to Unix domain socket currently supported by the PostgreSQL backend only (relative) directory path with trailing slash/backslash required by SQLite and SQLite3 backends section name in configuration file required by MS SQL Server and Sybase ASE backends Depending on the native database library, it's also possible to use database specific default values for the host and port parameters by supplying empty, zero-terminated strings or a NULL value. Return value odbx_init() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The backend module returned an error because it couldn't setup the necessary structures -ODBX_ERR_PARAM handle is NULL and the allocated connection object can't be stored -ODBX_ERR_NOMEM Allocating new memory for the connection object failed -ODBX_ERR_SIZE The length of a string exceeded the available buffer size -ODBX_ERR_NOTEXIST A backend module with this name wasn't found. Either the module isn't installed, the given name was wrong or not in the correct character case -ODBX_ERR_NOOP The backend module doesn't provide the required function See also odbx_bind() odbx_capabilities() odbx_error() odbx_finish() odbx_get_option() odbx_set_option() odbx_query 3 odbx_query Send a statement to the database server #include <opendbx/api.h> int odbx_query odbx_t* handle const char* stmt unsigned long length Description Sends the given statement to the database server associated to handle by odbx_init() for execution. The statement can contain non-displayable characters as arguments in conditions but they have to be escaped via odbx_escape() before adding them to the statement. Even more, every argument whose source is not controlled by the programmer must be escaped first to avoid SQL injection attacks to avoid serious harm! After invoking odbx_query(), one or more result sets will be sent back by the server and are available via odbx_result(). Before these sets aren't processed by calling odbx_row_fetch(), no other queries can be sent to the database server. Otherwise, odbx_query() will return a backend error from the native database library. The first parameter handle is the connection object created and returned by odbx_init() which becomes invalid as soon as it was supplied to odbx_finish(). The statement stored in the stmt parameter must be a valid statement understood by the receiving database server and it should be terminated by a \0 character. Some backends support multiple statements per query, which can be tested by calling odbx_get_option(). The length parameter must contain the length of the statement in bytes without the terminating \0 character. If variable sized character sets like UTF-8 are used, the same rule applies. This function doesn't support the wide character type (wchar_t) which uses two or four bytes per character. If you feed 0 (zero) as length parameter to the function, it will calculate the size of the statement on its own. Return value odbx_query() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library returned an error because it wasn't able to handle the statement correctly -ODBX_ERR_PARAM Either handle or stmt are NULL or handle is invalid -ODBX_ERR_NOMEM Allocating the required memory for the statement failed See also odbx_error() odbx_error_type() odbx_escape() odbx_result() odbx_result 3 odbx_result Retrieves a result set from the database server #include <opendbx/api.h> int odbx_result odbx_t* handle odbx_result_t** result struct timeval* timeout unsigned long chunk Description Retrieves the result of a query statement sent by odbx_query() from the database server. After a statement was successfully executed, a dynamically allocated object representing the result set is stored in result which must be freed afterwards by odbx_result_finish(). Result sets for SELECT-like statements returned successfully by this function can be processed by calling odbx_row_fetch() until all rows are retrieved. If the statement was an INSERT, UPDATE, DELETE or a similar statement, the number of affected rows is available via odbx_rows_affected(). If a timeout or error occurs, the result pointer is set to NULL. In case of a timeout, odbx_result() should be called again because the query isn't canceled. This function must be called multiple times until it returns zero, even if the query contains only one statement. Otherwise, memory will be leaked and odbx_query() will return an error. The third parameter (timeout) restricts the time the function is waiting for a result form the server. It may be NULL to wait until a result arrives. Otherwise, it can contain any number of seconds and microseconds in a timeval structure to wait for. The timeval structure must be set each time before calling odbx_result() because its content may get changed by the function. If the server doesn't respond within the timeout, the query isn't canceled! Instead, the next call to this function will wait for the same result set. Waiting the specified time may be implemented in the backends if it is possible, but there is no guarantee. If not, odbx_result() will return not before a responds arrives. Dependent on the native database library, it may be possible to retrieve all rows at once (if chunk is zero), one by one or more than one row at once. All positive values including zero are allowed as values for chunk If paging (more than one row at once) is not supported by the backend, it will use "one by one" or "all at once" if this is the only option provided. Return value odbx_result() returns ODBX_RES_ROWS ("3") if a result set is available and zero if no more results will be returned for the last query string sent via odbx_query() successfully. ODBX_RES_NOROWS ("2") is returned if the statement was executed successfully but will not return a results set (like for INSERT, UPDATE and DELETE statements) and ODBX_RES_TIMEOUT ("1") indicates a timeout. As soon as ODBX_RES_DONE ("0") is returned, the available result sets were processed. The named constants are available since OpenDBX 1.3.2 and the numbers in brackets have to be used instead if a previous release is is the basis for the application development. It returns an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. In this case, the backends are responsible for freeing the data structures they allocated inside the function and to clear the errornous result set if there's one available. The backends will also set the given result pointer to NULL before returning the error. Nevertheless, if a non-fatal error occurred it's possible to retrieve further result sets and this is necessary before calling odbx_query() on the same connection again. Errors -ODBX_ERR_BACKEND The native database library returned an error -ODBX_ERR_PARAM Either handle or result are NULL or handle is invalid -ODBX_ERR_NOMEM Allocating the required memory for the result failed -ODBX_ERR_RESULT Waiting for a response from the server failed because the connection was lost See also odbx_column_count() odbx_column_name() odbx_column_type() odbx_rows_affected() odbx_row_fetch() odbx_result_finish() odbx_result_finish 3 odbx_result_finish odbx_result_free Closes the result set and frees its allocated memory #include <opendbx/api.h> int odbx_result_finish odbx_result_t* result void odbx_result_free odbx_result_t* result Description odbx_result_finish() closes the result set which may also include dropping the non-fetched rows sent by the server. It releases all resources allocated by odbx_result() and by the native database library which are attached to result as well as the memory the first parameter is pointing to. Trying to free result manually using free() will create memory leaks because it contains more dynamically allocated structures and also the memory of the result set allocated by the native database library. odbx_result_finish() must be called even if the statement was not a SELECT-like statement which returned now rows as it may be necessary to commit the changes done by the statement. odbx_result_free() performs the same tasks as odbx_result_finish() but is unable to return an error if the task couln't be completed. It shouldn't be used in applications linking to the OpenDBX library version 1.3.8 or later and it will be removed from the library at a later stage. result must be valid a result set created by odbx_result() which is returned via its second parameter. After feeding it to odbx_result_finish() it becomes invalid and must not be feed to it again. Otherwise a "double free" may occur and the application may be terminated. Return value odbx_result_finish() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library returned an error -ODBX_ERR_PARAM The result parameter is invalid See also odbx_result() odbx_rows_affected 3 odbx_rows_affected Returns the number of changed records #include <opendbx/api.h> uint64_t odbx_rows_affected odbx_result_t* result Description Returns the number of rows that have been changed by the current statement whose result set was retrieved by odbx_result(). Affected rows are only returned for DELETE, INSERT or UPDATE statements and their concrete number depends on the database implementation. Instead returning the number of rows which are matched by the WHERE clause, MySQL for example does only count the rows whose values have really been changed. The result parameter required by this function must be a valid result set returned by odbx_result() and must not has been feed to odbx_result_finish() before. Return value odbx_rows_affected() returns the number of changed rows on success and zero if the database server didn't alter any rows. A value of zero can be returned if the statement doesn't match any rows. Some database server like MySQL may return a lower number than expected because they doesn't modify records whose values wouldn't change. Errors This function will also return zero if the result parameter is invalid. See also odbx_result() odbx_result_finish() odbx_row_fetch 3 odbx_row_fetch Retrieve rows from the result set #include <opendbx/api.h> int odbx_row_fetch odbx_result_t* result Description Retrieves the values of a row from the current result set returned by odbx_result(). Until this function is invoked, no row and field data is available via odbx_field_length() or odbx_field_value() and these functions will return zero respectively NULL. Moreover, it is necessary to fetch all rows from a result set until zero is returned indicating that no more rows are available. Otherwise - depending on the backend - an error may occur after calling odbx_result() the next time or the outstanding rows will be returned within the next result. odbx_row_fetch() requires a valid result object which was created by odbx_result(). It must not have been feed to odbx_result_finish() before. Return value odbx_row_fetch() will return ODBX_ROW_NEXT ("1") as long as rows are available from the result set. After the last row has been made available, further calls to this function will return ODBX_ROW_DONE ("0") indicating that the result set doesn't contain more rows. The named constants are available since OpenDBX 1.3.2 and the numbers in brackets have to be used instead if a previous release is is the basis for the application development. In case of an error, values less than zero are returned encodeing the reason why the error occurred. Errors -ODBX_ERR_PARAM The result parameter is either NULL or the object is invalid. This is usually the case if result has been already feed to odbx_result_finish(). See also odbx_column_count() odbx_column_name() odbx_column_type() odbx_error() odbx_error_type() odbx_field_length() odbx_field_value() odbx_result() odbx_set_option 3 odbx_set_option Change behaviour of the database backend #include <opendbx/api.h> int odbx_set_option odbx_t* handle unsigned int option void* value Description Changes the value of the specified option in the backend module or the native database library associated to handle by odbx_init(). Before trying to set an option, it should be tested with odbx_get_option() first to ensure that it is supported by the backend. Almost all options need to be set before connecting to the database server using odbx_bind() to take any effect. The first parameter handle is the connection object created and returned by odbx_init() which becomes invalid as soon as it was supplied to odbx_finish(). There are several option values defined as named constants in the odbx.h header file. The available options whose values can be changed are: ODBX_OPT_TLS Use encryption to transmit all data securely over the network via SSL or TLS. This option can be set to ODBX_TLS_NEVER (the default value) to prevent encrpytion, ODBX_TLS_ALWAYS to enforce encryption and to fail if it can't be used between the client library and the server or ODBX_TLS_TRY to use encryption if possible with the option to fall back to a connection which isn't encrypted. ODBX_OPT_MULTI_STATEMENTS Enables the database server to accept multiple statements in one query string sent via odbx_query() if the value of value is set to ODBX_ENABLE. Although, it might be possible to disable it by setting it to ODBX_DISABLE. ODBX_OPT_PAGED_RESULTS All database servers and client libraries are able to transfer the records row by row. Some of them can also transfer multiple rows or even all at once to minimize server load, network traffic and latency. The downside of this is an increased memory consumption. If paged results are supported by the backend, passing positive values will fetch the specified number of records at once from the database server. The value of zero ("0") is special in this case because it asks the backend module to retrieve all records at once ODBX_OPT_COMPRESS Enable compressed network traffic between database client and server. This can maximize the throughput if the network is the bottleneck. Pass an integer variable with ODBX_ENABLE to enable compression or with ODBX_DISABLE to disable it for this connection ODBX_OPT_MODE Some database servers support different modes of operation, e.g. modes for compliance to other SQL implementations or completely different query languages. This option is available since OpenDBX 1.1.4. value must point to a zero terminated string and for a detailed description of the MySQL modes look at their website If not stated otherwise, the type of the variable passed to the third parameter value must be an integer pointer. Its values should be in the range specified by the option being changed. Return value odbx_set_option() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_PARAM One of the supplied parameters is invalid or is NULL and this isn't allowed in the used backend module or in the native database client library -ODBX_ERR_OPTION The value passed to the option parameter isn't one of the values listed in this manual. The content of value remains unchanged if this error occurs -ODBX_ERR_OPTRO The option isn't intended for being changed and could only be read via odbx_get_option() -ODBX_ERR_OPTWR Setting the option failed for various reasons. It's most likely that the value passed via value didn't match the range of values expected by the backend or the native database library See also odbx_bind() odbx_error() odbx_get_option() odbx_unbind 3 odbx_unbind Disconnects from the database #include <opendbx/api.h> int odbx_unbind odbx_t* handle Description Releases the binding of the connection to the database and user associated by odbx_bind() to the supplied connection object. This is useful for switching to a different database or binding to the database with different credentials. It is also possible to set new connection related options before rebinding to the database server. If an open transaction exists while this function is executed in the firebird backend, it will be committed to the database and closed. The behavior of the other backends for open transactions may vary. It's necessary to process all result sets returned by the database server before using this function. Otherwise, it might return an error depending on the native database client library and the backend module. This function must be invoked before calling odbx_finish() to avoid memory leaks and connections left open which may block necessary resources later on. The handle parameter has to be the connection object created and returned by odbx_init(). It becomes invalid after it was supplied to odbx_finish() and odbx_unbind() will return an error in this case. Return value odbx_unbind() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_PARAM handle is NULL or the supplied connection object is invalid See also odbx_bind() odbx_error() odbx_finish() odbx_lo_open 3 odbx_lo_open Opens a large object in the database #include <opendbx/api.h> int odbx_lo_open odbx_result_t* result odbx_lo_t** lo const char* value Description Some database management systems store large amount of data in separate regions of the database and the content is only referenced by identifiers in the tables. The data types used for this are called Binary Large OBject (BLOB) and Character Large OBject (CLOB) and can be found in e.g. the Firebird and Oracle database servers. The OpenDBX library provides a large object interface to access, read and write their content via the "odbx_lo_*()" functions. To find out if large amount of data can be accessed directly or if the large object interface have to be used, odbx_capabilities() provides the answer when feed with the ODBX_CAP_LO The result parameter has to be the result object created and returned by odbx_result(). It becomes invalid after it was supplied to odbx_result_finish() and this function will return an error in that case. The second parameter, the pointer to a odbx_lo_t*, will contain the newly created large object handle if odbx_lo_open() succeeds. The lo handle is necessary for all other functions of the large object interface so they are able to perform their operations on the referenced content. The last parameter must be the return value of odbx_field_value() but you have to check for NULL values before feeding the value to odbx_lo_open(). Otherwise, an error is returned. Return value odbx_lo_open() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library couldn't open the large object -ODBX_ERR_NOMEM Allocating additionally required memory failed See also odbx_capabilities() odbx_field_value() odbx_lo_close() odbx_lo_read() odbx_lo_write() odbx_result() odbx_lo_close 3 odbx_lo_close Closes a large object reference #include <opendbx/api.h> int odbx_lo_close odbx_lo_t* lo Description This function commits any changes made by odbx_lo_write() and closes the open large object handle. To ommit calling this function on open large object handles will result in memory leaks as the data structure and dependent memory aren't freed. The lo parameter has to be the large object handle created and returned by odbx_lo_open() via its second parameter. It becomes invalid after it was supplied to odbx_lo_close() and this function will return an error in this case. Return value odbx_lo_close() returns ODBX_ERR_SUCCESS, or an error code whose value is less than zero if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library couldn't close the large object successfully -ODBX_ERR_HANDLE lo is NULL or the supplied large object handle is invalid See also odbx_lo_open() odbx_lo_read 3 odbx_lo_read Reads content from a large object #include <opendbx/api.h> ssize_t odbx_lo_read odbx_lo_t* lo void* buffer size_t buflen Description To get the content of a large object, odbx_lo_read() fetches the data in one or more pieces from the server and stores it into the user supplied buffer. After opening the large object using odbx_lo_open(), the first call to odbx_lo_read() will return the bytes from the beginning. The second and all other calls will store subsequent parts of the large object content into the buffer until the end of the data is reached. To reread the content a second time, you have to close the large object handle and reopen it again as some databases provide no way to reposition the internal file position indicator for the stream. The lo parameter has to be the large object handle created and returned by odbx_lo_open() via its second parameter. It becomes invalid after it was supplied to odbx_lo_close() and this function will return an error in this case. The large object content fetched from the server is stored into the user supplied buffer up to buflen bytes. Return value odbx_lo_read() returns the number of bytes placed into buffer, which may be up to buflen bytes. If the end of the content is reached and no more data is available, the return value will be 0. On error, a code whose value is less than zero is returned if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library couldn't read from the large object -ODBX_ERR_HANDLE lo is NULL or the supplied large object handle is invalid See also odbx_lo_open() odbx_lo_close() odbx_lo_write 3 odbx_lo_write Writes buffer content into the large object #include <opendbx/api.h> ssize_t odbx_lo_write odbx_lo_t* lo void* buffer size_t buflen Description odbx_lo_write() sends the data supplied in buffer to the server for storing it inside the large object. The function can be called more than once to add subsequent parts of the content to the object. If it isn't a new or empty object, the existing data will be overwritten and truncated to the new size. It's not possible to update only parts of the content as some databases doesn't support to position the internal file position indicator. The lo parameter has to be the large object handle created and returned by odbx_lo_open() via its second parameter. It becomes invalid after it was supplied to odbx_lo_close() and this function will return an error in this case. The data which should be send to the server is read from buffer up to buflen bytes. Return value odbx_lo_write() returns the number of bytes read from buffer and sent to the database server, which may be up to buflen bytes. It isn't guaranteed that the complete chunk was sent to the server, so the returned size may be less than the value in buflen. On error, a code whose value is less than zero is returned if one of the operations couldn't be completed successfully. Possible error codes are listed in the error section and they can be feed to odbx_error() and odbx_error_type() to get further details. Errors -ODBX_ERR_BACKEND The native database library couldn't write to the large object successfully -ODBX_ERR_HANDLE lo is NULL or the supplied large object handle is invalid See also odbx_lo_open() odbx_lo_close() opendbx-1.4.6/doc/Doxyfile.in0000644000175000017500000002534511425153451012774 00000000000000# Doxyfile 1.5.6 #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- DOXYFILE_ENCODING = UTF-8 PROJECT_NAME = @PACKAGE@ PROJECT_NUMBER = @VERSION@ OUTPUT_DIRECTORY = ./ CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English BRIEF_MEMBER_DESC = YES REPEAT_BRIEF = YES ABBREVIATE_BRIEF = "The $name class" \ "The $name widget" \ "The $name file" \ is \ provides \ specifies \ contains \ represents \ a \ an \ the ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = YES FULL_PATH_NAMES = YES STRIP_FROM_PATH = ../lib STRIP_FROM_INC_PATH = SHORT_NAMES = NO JAVADOC_AUTOBRIEF = YES QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO INHERIT_DOCS = YES SEPARATE_MEMBER_PAGES = NO TAB_SIZE = 4 ALIASES = OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_JAVA = NO OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES TYPEDEF_HIDES_STRUCT = NO #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- EXTRACT_ALL = NO EXTRACT_PRIVATE = NO EXTRACT_STATIC = NO EXTRACT_LOCAL_CLASSES = YES EXTRACT_LOCAL_METHODS = NO EXTRACT_ANON_NSPACES = NO HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_CLASSES = YES HIDE_FRIEND_COMPOUNDS = NO HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES INLINE_INFO = YES SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = YES SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO GENERATE_TODOLIST = YES GENERATE_TESTLIST = YES GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES SHOW_DIRECTORIES = NO SHOW_FILES = YES SHOW_NAMESPACES = YES FILE_VERSION_FILTER = #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- QUIET = NO WARNINGS = YES WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = NO WARN_FORMAT = "$file:$line: $text" WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- INPUT = ../lib/opendbx/api \ ../lib/opendbx/api.h INPUT_ENCODING = UTF-8 FILE_PATTERNS = *.c \ *.cc \ *.cxx \ *.cpp \ *.c++ \ *.d \ *.java \ *.ii \ *.ixx \ *.ipp \ *.i++ \ *.inl \ *.h \ *.hh \ *.hxx \ *.hpp \ *.h++ \ *.idl \ *.odl \ *.cs \ *.php \ *.php3 \ *.inc \ *.m \ *.mm \ *.dox \ *.py \ *.f90 \ *.f \ *.vhd \ *.vhdl \ *.C \ *.CC \ *.C++ \ *.II \ *.I++ \ *.H \ *.HH \ *.H++ \ *.CS \ *.PHP \ *.PHP3 \ *.M \ *.MM \ *.PY \ *.F90 \ *.F \ *.VHD \ *.VHDL RECURSIVE = NO EXCLUDE = EXCLUDE_SYMLINKS = NO EXCLUDE_PATTERNS = EXCLUDE_SYMBOLS = EXAMPLE_PATH = EXAMPLE_PATTERNS = * EXAMPLE_RECURSIVE = NO IMAGE_PATH = INPUT_FILTER = FILTER_PATTERNS = FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- SOURCE_BROWSER = NO INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES REFERENCED_BY_RELATION = NO REFERENCES_RELATION = NO REFERENCES_LINK_SOURCE = YES USE_HTAGS = NO VERBATIM_HEADERS = NO #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- ALPHABETICAL_INDEX = NO COLS_IN_ALPHA_INDEX = 5 IGNORE_PREFIX = #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- GENERATE_HTML = YES HTML_OUTPUT = html HTML_FILE_EXTENSION = .html HTML_HEADER = HTML_FOOTER = HTML_STYLESHEET = HTML_ALIGN_MEMBERS = YES GENERATE_HTMLHELP = NO GENERATE_DOCSET = NO DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project HTML_DYNAMIC_SECTIONS = NO CHM_FILE = HHC_LOCATION = GENERATE_CHI = NO CHM_INDEX_ENCODING = BINARY_TOC = NO TOC_EXPAND = NO DISABLE_INDEX = NO ENUM_VALUES_PER_LINE = 4 GENERATE_TREEVIEW = NONE TREEVIEW_WIDTH = 250 FORMULA_FONTSIZE = 10 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- GENERATE_LATEX = NO LATEX_OUTPUT = latex LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex COMPACT_LATEX = NO PAPER_TYPE = a4wide EXTRA_PACKAGES = LATEX_HEADER = PDF_HYPERLINKS = YES USE_PDFLATEX = YES LATEX_BATCHMODE = NO LATEX_HIDE_INDICES = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- GENERATE_RTF = NO RTF_OUTPUT = rtf COMPACT_RTF = NO RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- GENERATE_MAN = YES MAN_OUTPUT = man MAN_EXTENSION = .3 MAN_LINKS = NO #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- GENERATE_XML = YES XML_OUTPUT = xml XML_SCHEMA = XML_DTD = XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # configuration options related to the Perl module output #--------------------------------------------------------------------------- GENERATE_PERLMOD = NO PERLMOD_LATEX = NO PERLMOD_PRETTY = YES PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- ENABLE_PREPROCESSING = YES MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO SEARCH_INCLUDES = YES INCLUDE_PATH = INCLUDE_FILE_PATTERNS = PREDEFINED = EXPAND_AS_DEFINED = SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::additions related to external references #--------------------------------------------------------------------------- TAGFILES = GENERATE_TAGFILE = ALLEXTERNALS = NO EXTERNAL_GROUPS = YES PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- CLASS_DIAGRAMS = NO MSCGEN_PATH = HIDE_UNDOC_RELATIONS = YES HAVE_DOT = NO DOT_FONTNAME = FreeSans DOT_FONTPATH = CLASS_GRAPH = YES COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES UML_LOOK = NO TEMPLATE_RELATIONS = NO INCLUDE_GRAPH = YES INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES DOT_IMAGE_FORMAT = png DOT_PATH = DOTFILE_DIRS = DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 1000 DOT_TRANSPARENT = YES DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::additions related to the search engine #--------------------------------------------------------------------------- SEARCHENGINE = NO opendbx-1.4.6/config.sub0000755000175000017500000010242511425153451012072 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 # Free Software Foundation, Inc. timestamp='2009-06-11' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; -bluegene*) os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64octeon | mips64octeonel \ | mips64orion | mips64orionel \ | mips64r5900 | mips64r5900el \ | mips64vr | mips64vrel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64octeon-* | mips64octeonel-* \ | mips64orion-* | mips64orionel-* \ | mips64r5900-* | mips64r5900el-* \ | mips64vr-* | mips64vrel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aros) basic_machine=i386-pc os=-aros ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) basic_machine=powerpc-ibm os=-cnk ;; c90) basic_machine=c90-cray os=-unicos ;; cegcc) basic_machine=arm-unknown os=-cegcc ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dicos) basic_machine=i686-pc os=-dicos ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tile*) basic_machine=tile-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; z80-*-coff) basic_machine=z80-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -kopensolaris* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -cnk*|-aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: opendbx-1.4.6/opendbx.spec.in0000644000175000017500000003262111425153451013027 00000000000000# # OpenDBX rpm spec file # # By default OpenDBX is build with this backends: # - mysql # - odbc # - pgsql # - sqlite3 # to disable use --without [module-name] # # Optional supported backends are: # - firebird # - mssql # - oracle # - sqlite # - sybase # to enable use --with [module-name] # %if 0%{?_with_firebird:1} %define build_firebird 1 %endif %if 0%{!?_without_firebird:1} && 0%{?fedora} >= 12 %define build_firebird 1 %endif %if 0%{!?_without_firebird:1} && 0%{?suse_version} >= 1120 %define build_firebird 1 %endif %if 0%{?_with_mssql:1} %define build_mssql 1 %endif %if 0%{!?_without_mssql:1} && 0%{?fedora} >= 9 %define build_mssql 1 %endif %if 0%{!?_without_mssql:1} && 0%{?mdkversion} >= 200910 %define build_mssql 1 %endif %if 0%{!?_without_mysql:1} %define build_mysql 1 %endif %if 0%{!?_without_odbc:1} %define build_odbc 1 %endif %if 0%{?_with_oracle:1} %define build_oracle 1 %endif %if 0%{!?_without_pgsql:1} %define build_pgsql 1 %endif %if 0%{?_with_sqlite:1} %define build_sqlite 1 %endif %if 0%{!?_without_sqlite3:1} %define build_sqlite3 1 %endif %if 0%{?_with_sybase:1} %define build_sybase 1 %endif %if 0%{!?_without_sybase:1} && 0%{?fedora} >= 9 %define build_mssql 1 %endif %if 0%{!?_without_sybase:1} && 0%{?mdkversion} >= 200910 %define build_mssql 1 %endif Name: @PACKAGE@ Version: @VERSION@ Release: 1 Summary: Unified database layer with a clean and lightweight interface Summary(de.UTF-8): Bibliothek zum Zugriff auf Datenbanken über eine einheitliche Schnittstelle Summary(pl.UTF-8): Rozszerzana biblioteka dostÄ™pu do baz danych Group: Development/Libraries License: LGPL URL: http://www.linuxnetworks.de/opendbx/download/ Source0: %{name}-%{version}.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: gcc-c++, gettext %description OpenDBX provides a clean and lightweight API for interfacing native relational database APIs in a consistent way. By using the OpenDBX API you don't have to adapt your program to the different database APIs by yourself. %description -l de.UTF-8 OpenDBX ist eine schlanke und einfach zu verwendende Bibliothek, die es ermöglicht verschiedene Datenbankserver über eine konsistente Schnittstelle anzusprechen. %description -l pl.UTF-8 OpenDBX to skrajnie lekka, ale rozszerzalna biblioteka dostÄ™pu do baz danych napisana w C. UdostÄ™pnia warstwÄ™ abstrakcji dla wszystkich obsÅ‚ugiwanych baz danych w jednym, przejrzystym i prostym interfejsie automatycznie prowadzÄ…cym do eleganckiego projektu kodu. Jest to odpowiednia biblioteka, aby maÅ‚ym nakÅ‚adem pracy aplikacja obsÅ‚ugiwaÅ‚a różne bazy danych. %package utils Summary: Utility application for manipulating database content Summary(de.UTF-8): Hilfswerkzeuge für die Manipulation von Datenbankinhalten Group: Applications/Databases Requires: %{name} >= %{version} Requires: readline, ncurses BuildRequires: gcc-c++, gettext, readline, readline-devel, ncurses, ncurses-devel %description utils Utility application for manipulating database content either interactively by the user or in batch mode. %description utils -l de.UTF-8 Hilfswerkzeuge für die Manipulation von Datenbankinhalten, entweder interaktiv durch den Benutzer oder im Stapelbetrieb durch ein anderes Programm. %package devel Summary: OpenDBX development headers Summary(de.UTF-8): Entwicklungsschnittstellen für OpenDBX Summary(pl.UTF-8): Pliki nagłówkowe biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: pkgconfig BuildRequires: doxygen %description devel Header files for the OpenDBX database abstraction library %description devel -l de.UTF-8 Schnittstellen der OpenDBX Datenbankbibliothek zur Softwareentwicklung %description devel -l pl.UTF-8 Pliki nagłówkowe biblioteki opendbx. %if 0%{?build_firebird:1} %package firebird Summary: Firebird/Interbase backend for OpenDBX Summary(de.UTF-8): Firebird/Interbase Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych Firebird dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: firebird BuildRequires: firebird-devel %description firebird Firebird/Interbase backend for the OpenDBX database abstraction library %description firebird -l de.UTF-8 Firebird/Interbase Unterstützung für die OpenDBX Datenbankbibliothek %description firebird -l pl.UTF-8 Backend bazy danych Firebird dla biblioteki opendbx. %endif %if 0%{?build_mssql:1} %package mssql Summary: MS SQL Server backend for OpenDBX Summary(de.UTF-8): MS SQL Server Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych MS SQL dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: freetds BuildRequires: freetds-devel %description mssql MS SQL Server backend for the OpenDBX database abstraction library %description mssql -l de.UTF-8 MS SQL Server Unterstützung für die OpenDBX Datenbankbibliothek %description mssql -l pl.UTF-8 Backend bazy danych MS SQL dla biblioteki opendbx. %endif %if 0%{?build_mysql:1} %package mysql Summary: MySQL backend for OpenDBX Summary(de.UTF-8): MySQL Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych MySQL dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: mysql BuildRequires: mysql-devel %description mysql MySQL backend for the OpenDBX database abstraction library %description mysql -l de.UTF-8 MySQL Unterstützung für die OpenDBX Datenbankbibliothek %description mysql -l pl.UTF-8 Backend bazy danych MySQL dla biblioteki opendbx. %endif %if 0%{?build_odbc:1} %package odbc Summary: ODBC backend for OpenDBX Summary(de.UTF-8): ODBC Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych ODBC dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: unixODBC BuildRequires: unixODBC-devel %description odbc ODBC backend for the OpenDBX database abstraction library %description odbc -l de.UTF-8 ODBC Unterstützung für die OpenDBX Datenbankbibliothek %description odbc -l pl.UTF-8 Backend bazy danych ODBC dla biblioteki opendbx. %endif %if 0%{?build_oracle:1} %package oracle Summary: Oracle backend for OpenDBX Summary(de.UTF-8): Oracle Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych Oracle dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} %description oracle Oracle ctlib backend for the OpenDBX database abstraction library %description oracle -l de.UTF-8 Oracle Unterstützung für die OpenDBX Datenbankbibliothek %description oracle -l pl.UTF-8 Backend bazy danych Oracle dla biblioteki OpenDBX. %endif %if 0%{?build_pgsql:1} %package pgsql Summary: PostgreSQL backend for OpenDBX Summary(de.UTF-8): PostgreSQL Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych PostgreSQL dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: postgresql BuildRequires: postgresql-devel %description pgsql PostgreSQL backend for the OpenDBX database abstraction library %description pgsql -l de.UTF-8 PostgreSQL Unterstützung für die OpenDBX Datenbankbibliothek %description pgsql -l pl.UTF-8 Backend bazy danych PostgreSQL dla biblioteki opendbx. %endif %if 0%{?build_sqlite:1} %package sqlite Summary: SQLite backend for OpenDBX Summary(de.UTF-8): SQLite Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych SQLite dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: sqlite < 3.0 BuildRequires: sqlite-devel < 3.0 %description sqlite SQLite backend for the OpenDBX database abstraction library %description sqlite -l de.UTF-8 Sqlite Unterstützung für die OpenDBX Datenbankbibliothek %description sqlite -l pl.UTF-8 Backend bazy danych sqlite dla biblioteki opendbx. %endif %if 0%{?build_sqlite3:1} %package sqlite3 Summary: SQLite3 backend for OpenDBX Summary(de.UTF-8): SQLite3 Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych SQLite3 dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} %if 0%{?mandriva_version} Requires: sqlite3 BuildRequires: sqlite3-devel %else Requires: sqlite >= 3.0 BuildRequires: sqlite-devel >= 3.0 %endif %description sqlite3 SQLite3 backend for the OpenDBX database abstraction library %description sqlite3 -l de.UTF-8 Sqlite3 Unterstützung für die OpenDBX Datenbankbibliothek %description sqlite3 -l pl.UTF-8 Backend bazy danych sqlite3 dla biblioteki opendbx. %endif %if 0%{?build_sybase:1} %package sybase Summary: Sybase backend for OpenDBX Summary(de.UTF-8): Sybase Unterstützung für OpenDBX Summary(pl.UTF-8): Backend bazy danych Sybase dla biblioteki OpenDBX Group: Development/Libraries Requires: %{name} = %{version}-%{release} Requires: freetds BuildRequires: freetds-devel %description sybase Sybase ctlib backend for the OpenDBX database abstraction library %description sybase -l de.UTF-8 Sybase Unterstützung für die OpenDBX Datenbankbibliothek %description sybase -l pl.UTF-8 Backend bazy danych sybase dla biblioteki opendbx. %endif %prep %setup -q -n opendbx-%{version} %build CPPFLAGS="%{!?_without_mysql:-I/usr/include/mysql} %{!?_without_pgsql:-I/usr/include/pgsql}"; export CPPFLAGS; LDFLAGS="-L/lib64 %{!?_without_mysql:-L/usr/lib/mysql -L/usr/lib64/mysql}"; export LDFLAGS; %configure \ --disable-rpath \ --disable-static \ --with-backends="\ %{?build_firebird:firebird }\ %{?build_mssql:mssql }\ %{?build_mysql:mysql }\ %{?build_odbc:odbc }\ %{?build_oracle:oracle }\ %{?build_pgsql:pgsql }\ %{?build_sqlite:sqlite }\ %{?build_sqlite3:sqlite3 }\ %{?build_sybase:sybase }\ " || cat config.log %{__make} %{?_smp_mflags} %install %{__make} DESTDIR=%{buildroot} install rm %{buildroot}%{_libdir}/lib*.*a rm %{buildroot}%{_libdir}/opendbx/lib*.*a %find_lang %{name} %find_lang %{name}-utils %clean if test "%{buildroot}" != "/"; then rm -rf %{buildroot}; fi %post -p /sbin/ldconfig %postun -p /sbin/ldconfig %files -f %{name}.lang %defattr(-,root,root,-) %{_libdir}/libopendbx.so.* %{_libdir}/libopendbxplus.so.* %dir %{_libdir}/opendbx %doc AUTHORS COPYING ChangeLog NEWS README TODO %files utils -f %{name}-utils.lang %defattr(-,root,root,-) %{_bindir}/odbx-sql %{_datadir}/%{name} %{_datadir}/%{name}/keywords #%{_mandir}/man1/* %files devel %defattr(-,root,root,-) %{_includedir}/odbx.h %{_includedir}/opendbx %{_includedir}/opendbx/api* %{_libdir}/libopendbx.so %{_libdir}/libopendbxplus.so %{_libdir}/pkgconfig/opendbx.pc %{_libdir}/pkgconfig/opendbxplus.pc #%{_mandir}/man3/* %if 0%{?build_firebird:1} %files firebird %defattr(-,root,root,-) %{_libdir}/opendbx/libfirebirdbackend.so* %endif %if 0%{?build_mssql:1} %files mssql %defattr(-,root,root,-) %{_libdir}/opendbx/libmssqlbackend.so* %endif %if 0%{?build_mysql:1} %files mysql %defattr(-,root,root,-) %{_libdir}/opendbx/libmysqlbackend.so* %endif %if 0%{?build_odbc:1} %files odbc %defattr(-,root,root,-) %{_libdir}/opendbx/libodbcbackend.so* %endif %if 0%{?build_oracle:1} %files oracle %defattr(-,root,root,-) %{_libdir}/opendbx/liboraclebackend.so* %endif %if 0%{?build_pgsql:1} %files pgsql %defattr(-,root,root,-) %{_libdir}/opendbx/libpgsqlbackend.so* %endif %if 0%{?build_sqlite:1} %files sqlite %defattr(-,root,root,-) %{_libdir}/opendbx/libsqlitebackend.so* %endif %if 0%{?build_sqlite3:1} %files sqlite3 %defattr(-,root,root,-) %{_libdir}/opendbx/libsqlite3backend.so* %endif %if 0%{?build_sybase:1} %files sybase %defattr(-,root,root,-) %{_libdir}/opendbx/libsybasebackend.so* %endif %changelog * Mon Apr 19 2010 Norbert Sendetzky 1.4.5-1 - Centralized decisions which backends to build - Build firebird, mssql and sybase backends for supported distributions - Reordered backends * Wed Sep 30 2009 Norbert Sendetzky 1.4.4-1 - Fixed included backends in main package - Fixed odbx package - Fixed builds on x86_64 platforms - Compatible with OpenSUSE build service - Added workarounds for RHEL, CentOS and Mandriva regarding readline * Sun Apr 19 2009 Norbert Sendetzky 1.4.1-1 - Added opendbxplus.pc * Sun Jun 15 2008 Norbert Sendetzky 1.3.11-1 - Added items for odbc backend and utils * Mon Mar 17 2008 Norbert Sendetzky 1.3.7-1 - Added polish summary and descriptions (thanks to PLD team) - Added items for oracle backend * Wed Jan 31 2007 Norbert Sendetzky 1.2.1-1 - Added german summary and descriptions - Disabled static library builds and removed libtool files - Added ldconfig call in post and postun sections - Added gettext and pkgconfig as requirements - Replaced language file handling with find_lang macro - Used optflags macro instead of hard coded compiler flags - Used macro style consistently - Corrected mail addresses - Removed oracle sections - Fixed _without_pgqql - Minor changes * Sat Dec 09 2006 Norbert Sendetzky 1.1.8-1 - Added mssql, sybase and oracle backend * Tue Jun 13 2006 Kees Monshouwer 1.1.0-2 - Fixed a few minor problems - Added conditional build support - Added firefird and freetds backend * Mon Jun 12 2006 Kees Monshouwer 1.1.0-1 - Initial build for CentOS 4.3 opendbx-1.4.6/backends/0000755000175000017500000000000011765214161011740 500000000000000opendbx-1.4.6/backends/sqlite/0000755000175000017500000000000011765214161013241 500000000000000opendbx-1.4.6/backends/sqlite/sqlitebackend.h0000644000175000017500000000224211425153450016137 00000000000000/* * SQLite driver for OpenDBX * Copyright (C) 2004-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #include #ifndef SQLITEBACKEND_H #define SQLITEBACKEND_H /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct sconn { char* path; int pathlen; int errno; char* errmsg; char* stmt; }; struct sres { int cur; int nrow; int ncolumn; }; #endif opendbx-1.4.6/backends/sqlite/Makefile.in0000644000175000017500000005167411765211301015234 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/sqlite DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libsqlitebackend_la_DEPENDENCIES = am_libsqlitebackend_la_OBJECTS = libsqlitebackend_la-sqlitebackend.lo \ libsqlitebackend_la-sqlite_basic.lo libsqlitebackend_la_OBJECTS = $(am_libsqlitebackend_la_OBJECTS) libsqlitebackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libsqlitebackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libsqlitebackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libsqlitebackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libsqlitebackend_la_SOURCES) DIST_SOURCES = $(libsqlitebackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libsqlitebackend.la @SINGLELIB_FALSE@libsqlitebackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libsqlitebackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libsqlitebackend.la @SINGLELIB_FALSE@libsqlitebackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libsqlitebackend_la_SOURCES = sqlitebackend.h sqlitebackend.c sqlite_basic.h sqlite_basic.c libsqlitebackend_la_LIBADD = -l@LIBSQLITE@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/sqlite/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/sqlite/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libsqlitebackend.la: $(libsqlitebackend_la_OBJECTS) $(libsqlitebackend_la_DEPENDENCIES) $(libsqlitebackend_la_LINK) $(am_libsqlitebackend_la_rpath) $(libsqlitebackend_la_OBJECTS) $(libsqlitebackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsqlitebackend_la-sqlite_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsqlitebackend_la-sqlitebackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libsqlitebackend_la-sqlitebackend.lo: sqlitebackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlitebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsqlitebackend_la-sqlitebackend.lo -MD -MP -MF $(DEPDIR)/libsqlitebackend_la-sqlitebackend.Tpo -c -o libsqlitebackend_la-sqlitebackend.lo `test -f 'sqlitebackend.c' || echo '$(srcdir)/'`sqlitebackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libsqlitebackend_la-sqlitebackend.Tpo $(DEPDIR)/libsqlitebackend_la-sqlitebackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sqlitebackend.c' object='libsqlitebackend_la-sqlitebackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlitebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsqlitebackend_la-sqlitebackend.lo `test -f 'sqlitebackend.c' || echo '$(srcdir)/'`sqlitebackend.c libsqlitebackend_la-sqlite_basic.lo: sqlite_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlitebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsqlitebackend_la-sqlite_basic.lo -MD -MP -MF $(DEPDIR)/libsqlitebackend_la-sqlite_basic.Tpo -c -o libsqlitebackend_la-sqlite_basic.lo `test -f 'sqlite_basic.c' || echo '$(srcdir)/'`sqlite_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libsqlitebackend_la-sqlite_basic.Tpo $(DEPDIR)/libsqlitebackend_la-sqlite_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sqlite_basic.c' object='libsqlitebackend_la-sqlite_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlitebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsqlitebackend_la-sqlite_basic.lo `test -f 'sqlite_basic.c' || echo '$(srcdir)/'`sqlite_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/sqlite/Makefile.am0000644000175000017500000000076211425153447015224 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libsqlitebackend.la libsqlitebackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libsqlitebackend.la libsqlitebackend_la_CPPFLAGS = libsqlitebackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libsqlitebackend_la_SOURCES = sqlitebackend.h sqlitebackend.c sqlite_basic.h sqlite_basic.c libsqlitebackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libsqlitebackend_la_LIBADD = -l@LIBSQLITE@ opendbx-1.4.6/backends/sqlite/sqlitebackend.c0000644000175000017500000000111711425153450016132 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sqlitebackend.h" /* * Declaration of SQLite capabilities */ extern struct odbx_basic_ops sqlite_odbx_basic_ops; struct odbx_ops sqlite_odbx_ops = { .basic = &sqlite_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &sqlite_odbx_ops; } #endif opendbx-1.4.6/backends/sqlite/sqlite_basic.h0000644000175000017500000000340111425153447015774 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sqlitebackend.h" #ifndef SQLITE_BASIC_H #define SQLITE_BASIC_H /* * Basic operations */ static int sqlite_odbx_init( odbx_t* handle, const char* host, const char* port ); static int sqlite_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int sqlite_odbx_unbind( odbx_t* handle ); static int sqlite_odbx_finish( odbx_t* handle ); static int sqlite_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int sqlite_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* sqlite_odbx_error( odbx_t* handle ); static int sqlite_odbx_error_type( odbx_t* handle ); static int sqlite_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int sqlite_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int sqlite_odbx_result_finish( odbx_result_t* result ); static int sqlite_odbx_row_fetch( odbx_result_t* result ); static uint64_t sqlite_odbx_rows_affected( odbx_result_t* result ); static unsigned long sqlite_odbx_column_count( odbx_result_t* result ); static const char* sqlite_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int sqlite_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long sqlite_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* sqlite_odbx_field_value( odbx_result_t* result, unsigned long pos ); #endif opendbx-1.4.6/backends/sqlite/sqlite_basic.c0000644000175000017500000002435311425153447016000 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sqlite_basic.h" #include #include #include #include /* * Declaration of SQLite capabilities */ struct odbx_basic_ops sqlite_odbx_basic_ops = { .init = sqlite_odbx_init, .bind = sqlite_odbx_bind, .unbind = sqlite_odbx_unbind, .finish = sqlite_odbx_finish, .get_option = sqlite_odbx_get_option, .set_option = sqlite_odbx_set_option, .error = sqlite_odbx_error, .error_type = sqlite_odbx_error_type, .escape = NULL, .query = sqlite_odbx_query, .result = sqlite_odbx_result, .result_finish = sqlite_odbx_result_finish, .rows_affected = sqlite_odbx_rows_affected, .row_fetch = sqlite_odbx_row_fetch, .column_count = sqlite_odbx_column_count, .column_name = sqlite_odbx_column_name, .column_type = sqlite_odbx_column_type, .field_length = sqlite_odbx_field_length, .field_value = sqlite_odbx_field_value, }; /* * Private sqlite error messages */ static const char* sqlite_odbx_errmsg[] = { gettext_noop("Opening database failed") }; /* * ODBX basic operations * SQLite style */ /* * SQLite doesn't connect to a database server. Instead it opens the database * (a file on the harddisk) directly. Thus, host doesn't contain the name of a * computer but of a directory in the filesystem instead. Port is unused. */ static int sqlite_odbx_init( odbx_t* handle, const char* host, const char* port ) { if( ( handle->aux = malloc( sizeof( struct sconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } struct sconn* aux = handle->aux; aux->pathlen = 0; aux->path = NULL; aux->errmsg = NULL; handle->generic = NULL; if( host != NULL ) { aux->pathlen = strlen( host ); /* host == directory */ if( ( aux->path = malloc( aux->pathlen + 1 ) ) == NULL ) { free( handle->aux ); handle->aux = NULL; return -ODBX_ERR_NOMEM; } snprintf( aux->path, aux->pathlen + 1, "%s", host ); } return ODBX_ERR_SUCCESS; } /* * username and password are not used by SQLite. It relies on the filesystem * access control mechanisms for allowing or preventing database access. */ static int sqlite_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { struct sconn* aux = handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } aux->errmsg = NULL; size_t flen = strlen( database ) + 1; if( ( aux->path = realloc( aux->path, aux->pathlen + flen + 1 ) ) == NULL ) { return -ODBX_ERR_NOMEM; } snprintf( aux->path + aux->pathlen, flen + 1, "%s", database ); /* The second parameter is currently unused. */ if( ( handle->generic = (void*) sqlite_open( aux->path, 0, NULL ) ) == NULL ) { aux->errno = SQLITE_CANTOPEN; aux->errmsg = (char*) dgettext( "opendbx", sqlite_odbx_errmsg[0] ); return -ODBX_ERR_BACKEND; } int err; if( ( err = sqlite_exec( (sqlite*) handle->generic, "PRAGMA empty_result_callbacks = ON;", NULL, NULL, NULL ) ) != SQLITE_OK ) { aux->errno = err; aux->errmsg = (char*) sqlite_error_string( err ); return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int sqlite_odbx_unbind( odbx_t* handle ) { struct sconn* aux = (struct sconn*) handle->aux; if( handle->generic != NULL && aux != NULL ) { sqlite_close( (sqlite*) handle->generic ); handle->generic = NULL; aux->errmsg = NULL; return ODBX_ERR_SUCCESS; } return -ODBX_ERR_PARAM; } static int sqlite_odbx_finish( odbx_t* handle ) { if( handle->aux != NULL ) { free( ((struct sconn*) handle->aux)->path ); free( handle->aux ); handle->aux = NULL; return ODBX_ERR_SUCCESS; } return -ODBX_ERR_PARAM; } static int sqlite_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { if( handle->aux == NULL ) { return -ODBX_ERR_PARAM; } ((struct sconn*) handle->aux)->errmsg = NULL; switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_THREAD_SAFE: /* FIXME: How to find out if THREADSAFE was set while sqlite compilation */ case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: *(int*) value = ODBX_DISABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int sqlite_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { if( handle->aux == NULL ) { return -ODBX_ERR_PARAM; } ((struct sconn*) handle->aux)->errmsg = NULL; switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: break; default: return -ODBX_ERR_OPTION; } return -ODBX_ERR_OPTWR; } static const char* sqlite_odbx_error( odbx_t* handle ) { if( handle->aux != NULL ) { return ((struct sconn*) handle->aux)->errmsg; } return NULL; } static int sqlite_odbx_error_type( odbx_t* handle ) { if( handle->aux != NULL ) { switch( ((struct sconn*) handle->aux)->errno ) { case SQLITE_OK: return 0; case SQLITE_PERM: case SQLITE_NOMEM: case SQLITE_READONLY: case SQLITE_IOERR: case SQLITE_CORRUPT: case SQLITE_FULL: case SQLITE_CANTOPEN: case SQLITE_NOLFS: case SQLITE_AUTH: return -1; } } return 1; } static int sqlite_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { struct sconn* aux = (struct sconn*) handle->aux; if( aux == NULL || query == NULL ) { return -ODBX_ERR_PARAM; } if( ( aux->stmt = malloc( length + 1 ) ) == NULL ) { return -ODBX_ERR_NOMEM; } memcpy( aux->stmt, query, length ); aux->stmt[length] = 0; return ODBX_ERR_SUCCESS; } static int sqlite_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { char** res; long ms = 0; int err, nrow, ncolumn; struct sres* sres; struct sconn* aux = (struct sconn*) handle->aux; if( handle->generic == NULL || aux == NULL ) { return -ODBX_ERR_PARAM; } aux->errmsg = NULL; if( aux->stmt == NULL ) { return ODBX_RES_DONE; /* no more results */ } if( timeout != NULL ) { ms = timeout->tv_sec * 1000 + timeout->tv_usec / 1000; } while( ( err = sqlite_get_table( (sqlite*) handle->generic, aux->stmt, &res, &nrow, &ncolumn, NULL ) ) == SQLITE_BUSY ) { if( ms <= 0 ) { return ODBX_RES_TIMEOUT; } /* Timeout */ sqlite_busy_timeout( (sqlite*) handle->generic, 100 ); ms -= 100; } free( aux->stmt ); aux->stmt = NULL; if( err != SQLITE_OK ) { aux->errno = err; aux->errmsg = (char*) sqlite_error_string( err ); return -ODBX_ERR_BACKEND; } if( ( *result = (odbx_result_t*) malloc( sizeof( struct odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } if( ( sres = (struct sres*) malloc( sizeof( struct sres ) ) ) == NULL ) { free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } (*result)->generic = (void*) res; (*result)->aux = (void*) sres; sres->ncolumn = ncolumn; sres->nrow = nrow; sres->cur = -1; if( !ncolumn ) { return ODBX_RES_NOROWS; } /* empty or not SELECT like query */ return ODBX_RES_ROWS; /* result is available */ } static int sqlite_odbx_result_finish( odbx_result_t* result ) { if( result->handle != NULL && result->handle->aux != NULL ) { ((struct sconn*) result->handle->aux)->errmsg = NULL; } sqlite_free_table( (char**) result->generic ); if( result->aux != NULL ) { free( result->aux ); result->aux = NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int sqlite_odbx_row_fetch( odbx_result_t* result ) { struct sres* res = (struct sres*) result->aux; if( result->aux != NULL && result->handle != NULL && result->handle->aux != NULL ) { ((struct sconn*) result->handle->aux)->errmsg = NULL; res->cur++; if( res->cur < res->nrow ) { return ODBX_ROW_NEXT; } return ODBX_ROW_DONE; } return -ODBX_ERR_PARAM; } static uint64_t sqlite_odbx_rows_affected( odbx_result_t* result ) { if( result->handle != NULL && result->handle->aux != NULL ) { ((struct sconn*) result->handle->aux)->errmsg = NULL; return (uint64_t) sqlite_changes( (sqlite*) result->handle->generic ); } return 0; } static unsigned long sqlite_odbx_column_count( odbx_result_t* result ) { if( result->handle != NULL && result->handle->aux != NULL && result->aux != NULL ) { ((struct sconn*) result->handle->aux)->errmsg = NULL; return ((struct sres*) result->aux)->ncolumn; } return 0; } static const char* sqlite_odbx_column_name( odbx_result_t* result, unsigned long pos ) { if( result->handle != NULL && result->handle->aux != NULL && result->aux != NULL ) { ((struct sconn*) result->handle->aux)->errmsg = NULL; if( result->generic != NULL && pos < ((struct sres*) result->aux)->ncolumn ) { return ((const char**) result->generic)[pos]; } } return NULL; } static int sqlite_odbx_column_type( odbx_result_t* result, unsigned long pos ) { if( result->handle != NULL && result->handle->aux != NULL ) { ((struct sconn*) result->handle->aux)->errmsg = NULL; return ODBX_TYPE_CLOB; } return -ODBX_ERR_PARAM; } static unsigned long sqlite_odbx_field_length( odbx_result_t* result, unsigned long pos ) { if( result->handle != NULL && result->handle->aux != NULL && result->aux != NULL ) { struct sres* aux = (struct sres*) result->aux; ((struct sconn*) result->handle->aux)->errmsg = NULL; if( result->generic && pos < aux->ncolumn ) { int num = aux->cur * aux->ncolumn + aux->ncolumn + pos; return (unsigned long) strlen( ((char**) result->generic)[num] ); } } return 0; } static const char* sqlite_odbx_field_value( odbx_result_t* result, unsigned long pos ) { if( result->handle != NULL && result->handle->aux != NULL && result->aux != NULL ) { struct sres* aux = (struct sres*) result->aux; ((struct sconn*) result->handle->aux)->errmsg = NULL; if( result->generic && pos < aux->ncolumn ) { int num = aux->ncolumn + aux->cur * aux->ncolumn + pos; return ((const char**) result->generic)[num]; } } return NULL; } opendbx-1.4.6/backends/firebird/0000755000175000017500000000000011765214161013526 500000000000000opendbx-1.4.6/backends/firebird/firebirdbackend.c0000644000175000017500000000122411425153447016711 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbxdrv.h" /* * Declaration of Firebird capabilities */ extern struct odbx_basic_ops firebird_odbx_basic_ops; extern struct odbx_lo_ops firebird_odbx_lo_ops; struct odbx_ops firebird_odbx_ops = { .basic = &firebird_odbx_basic_ops, .lo = &firebird_odbx_lo_ops, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &firebird_odbx_ops; } #endif opendbx-1.4.6/backends/firebird/Makefile.in0000644000175000017500000005457411765211300015522 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/firebird DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libfirebirdbackend_la_DEPENDENCIES = am_libfirebirdbackend_la_OBJECTS = \ libfirebirdbackend_la-firebirdbackend.lo \ libfirebirdbackend_la-firebird_basic.lo \ libfirebirdbackend_la-firebird_lo.lo libfirebirdbackend_la_OBJECTS = $(am_libfirebirdbackend_la_OBJECTS) libfirebirdbackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libfirebirdbackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libfirebirdbackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libfirebirdbackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libfirebirdbackend_la_SOURCES) DIST_SOURCES = $(libfirebirdbackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libfirebirdbackend.la @SINGLELIB_FALSE@libfirebirdbackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libfirebirdbackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libfirebirdbackend.la @SINGLELIB_FALSE@libfirebirdbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libfirebirdbackend_la_SOURCES = firebirdbackend.h firebirdbackend.c firebird_basic.h firebird_basic.c firebird_lo.h firebird_lo.c libfirebirdbackend_la_LIBADD = -l@LIBFIREBIRD@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/firebird/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/firebird/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libfirebirdbackend.la: $(libfirebirdbackend_la_OBJECTS) $(libfirebirdbackend_la_DEPENDENCIES) $(libfirebirdbackend_la_LINK) $(am_libfirebirdbackend_la_rpath) $(libfirebirdbackend_la_OBJECTS) $(libfirebirdbackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfirebirdbackend_la-firebird_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfirebirdbackend_la-firebird_lo.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libfirebirdbackend_la-firebirdbackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libfirebirdbackend_la-firebirdbackend.lo: firebirdbackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libfirebirdbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libfirebirdbackend_la-firebirdbackend.lo -MD -MP -MF $(DEPDIR)/libfirebirdbackend_la-firebirdbackend.Tpo -c -o libfirebirdbackend_la-firebirdbackend.lo `test -f 'firebirdbackend.c' || echo '$(srcdir)/'`firebirdbackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libfirebirdbackend_la-firebirdbackend.Tpo $(DEPDIR)/libfirebirdbackend_la-firebirdbackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='firebirdbackend.c' object='libfirebirdbackend_la-firebirdbackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libfirebirdbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libfirebirdbackend_la-firebirdbackend.lo `test -f 'firebirdbackend.c' || echo '$(srcdir)/'`firebirdbackend.c libfirebirdbackend_la-firebird_basic.lo: firebird_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libfirebirdbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libfirebirdbackend_la-firebird_basic.lo -MD -MP -MF $(DEPDIR)/libfirebirdbackend_la-firebird_basic.Tpo -c -o libfirebirdbackend_la-firebird_basic.lo `test -f 'firebird_basic.c' || echo '$(srcdir)/'`firebird_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libfirebirdbackend_la-firebird_basic.Tpo $(DEPDIR)/libfirebirdbackend_la-firebird_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='firebird_basic.c' object='libfirebirdbackend_la-firebird_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libfirebirdbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libfirebirdbackend_la-firebird_basic.lo `test -f 'firebird_basic.c' || echo '$(srcdir)/'`firebird_basic.c libfirebirdbackend_la-firebird_lo.lo: firebird_lo.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libfirebirdbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libfirebirdbackend_la-firebird_lo.lo -MD -MP -MF $(DEPDIR)/libfirebirdbackend_la-firebird_lo.Tpo -c -o libfirebirdbackend_la-firebird_lo.lo `test -f 'firebird_lo.c' || echo '$(srcdir)/'`firebird_lo.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libfirebirdbackend_la-firebird_lo.Tpo $(DEPDIR)/libfirebirdbackend_la-firebird_lo.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='firebird_lo.c' object='libfirebirdbackend_la-firebird_lo.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libfirebirdbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libfirebirdbackend_la-firebird_lo.lo `test -f 'firebird_lo.c' || echo '$(srcdir)/'`firebird_lo.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/firebird/Makefile.am0000644000175000017500000000105011425153447015500 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libfirebirdbackend.la libfirebirdbackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libfirebirdbackend.la libfirebirdbackend_la_CPPFLAGS = libfirebirdbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libfirebirdbackend_la_SOURCES = firebirdbackend.h firebirdbackend.c firebird_basic.h firebird_basic.c firebird_lo.h firebird_lo.c libfirebirdbackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libfirebirdbackend_la_LIBADD = -l@LIBFIREBIRD@ opendbx-1.4.6/backends/firebird/firebird_basic.c0000644000175000017500000004542611425153447016556 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2005-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbxdrv.h" #include "firebird_basic.h" #include #include #include #include /* * Declaration of Firebird capabilities */ struct odbx_basic_ops firebird_odbx_basic_ops = { .init = firebird_odbx_init, .bind = firebird_odbx_bind, .unbind = firebird_odbx_unbind, .finish = firebird_odbx_finish, .get_option = firebird_odbx_get_option, .set_option = firebird_odbx_set_option, .error = firebird_odbx_error, .error_type = firebird_odbx_error_type, .escape = NULL, .query = firebird_odbx_query, .result = firebird_odbx_result, .result_finish = firebird_odbx_result_finish, .rows_affected = firebird_odbx_rows_affected, .row_fetch = firebird_odbx_row_fetch, .column_count = firebird_odbx_column_count, .column_name = firebird_odbx_column_name, .column_type = firebird_odbx_column_type, .field_length = firebird_odbx_field_length, .field_value = firebird_odbx_field_value, }; /* * ODBX basic operations * Firebird style */ static int firebird_odbx_init( odbx_t* handle, const char* host, const char* port ) { handle->generic = NULL; if( ( handle->aux = malloc( sizeof( struct fbconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } struct fbconn* fbc = (struct fbconn*) handle->aux; /* * Firebird connect string: server[/port]:/path/to/file.gdb */ int len = 0; fbc->srvlen = 0; fbc->path = NULL; if( host != NULL ) { fbc->srvlen = strlen( host ); } if( port != NULL ) { len = strlen( port ); } if( fbc->srvlen > 0 ) { if( ( fbc->path = (char*) malloc( fbc->srvlen + len + 3 ) ) == NULL ) { free( handle->aux ); handle->aux = NULL; return -ODBX_ERR_NOMEM; } memcpy( fbc->path, host, fbc->srvlen ); if( len > 0 ) { fbc->srvlen += snprintf( fbc->path + fbc->srvlen, len + 2, "/%s", port ); } fbc->path[fbc->srvlen++] = ':'; fbc->path[fbc->srvlen] = 0; } if( ( fbc->qda = (XSQLDA *) malloc( XSQLDA_LENGTH(1) ) ) == NULL ) { if( fbc->path != NULL ) { free( fbc->path ); } free( handle->aux ); handle->aux = NULL; return -ODBX_ERR_NOMEM; } fbc->qda->sqln = 1; fbc->qda->version = SQLDA_VERSION1; return ODBX_ERR_SUCCESS; } static int firebird_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { struct fbconn* fbc = (struct fbconn*) handle->aux; if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } if( database == NULL || fbc == NULL ) { return -ODBX_ERR_PARAM; } size_t len2, len = 1; char param[512]; fbc->tr[0] = 0; fbc->trlevel = 0; fbc->stmt = NULL; fbc->numstmt = 0; param[0] = isc_dpb_version1; if( who != NULL ) { len2 = strlen( who ); param[len] = isc_dpb_user_name; param[len+1] = (char) len2; if( len + len2 + 2 > 512 ) { return -ODBX_ERR_SIZE; } memcpy( param + len + 2, who, len2 ); len += len2 + 2; } if( cred != NULL ) { len2 = strlen( cred ); param[len] = isc_dpb_password; param[len+1] = (char) len2; if( len + len2 + 2 > 512 ) { return -ODBX_ERR_SIZE; } memcpy( param + len + 2, cred, len2 ); len += len2 + 2; } /* * Firebird connect string: server[/port]:/path/to/file.gdb */ len2 = strlen( database ); if( ( fbc->path = realloc( fbc->path, fbc->srvlen + len2 + 1 ) ) == NULL ) { return -ODBX_ERR_NOMEM; } memcpy( fbc->path + fbc->srvlen, database, len2 + 1 ); if( isc_attach_database( fbc->status, (short) fbc->srvlen + len2, fbc->path, &(handle->generic), (short) len, param ) != 0 ) { return -ODBX_ERR_BACKEND; } static char tbuf[] = { isc_tpb_version3, isc_tpb_write, isc_tpb_read_committed, isc_tpb_rec_version }; if( isc_start_transaction( fbc->status, fbc->tr, 1, &(handle->generic), sizeof( tbuf ), tbuf ) != 0 ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int firebird_odbx_unbind( odbx_t* handle ) { struct fbconn* fbc = (struct fbconn*) handle->aux; if( fbc == NULL ) { return -ODBX_ERR_PARAM; } if( isc_rollback_transaction( fbc->status, fbc->tr ) != 0 ) { return -ODBX_ERR_BACKEND; } if( isc_detach_database( fbc->status, &(handle->generic) ) != 0 ) { return -ODBX_ERR_BACKEND; } handle->generic = NULL; return ODBX_ERR_SUCCESS; } static int firebird_odbx_finish( odbx_t* handle ) { if( handle->aux != NULL ) { free( ((struct fbconn*) handle->aux)->path ); free( ((struct fbconn*) handle->aux)->qda ); free( handle->aux ); handle->aux = NULL; } return ODBX_ERR_SUCCESS; } static int firebird_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_THREAD_SAFE: *(int*) value = ODBX_ENABLE; break; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: *(int*) value = ODBX_DISABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int firebird_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: return -ODBX_ERR_OPTWR; default: return -ODBX_ERR_OPTION; } } static const char* firebird_odbx_error( odbx_t* handle ) { int len = 0; char msg[512]; struct fbconn* fbc = (struct fbconn*) handle->aux; if( fbc == NULL ) { return NULL; } #ifdef HAVE_LIBFBCLIENT const ISC_STATUS* perr = fbc->status; while( fb_interpret( msg, 512, &perr ) ) { if( ( len += snprintf( fbc->errmsg + len, FIREBIRD_ERRLEN - len, "%s. ", msg ) ) < 0 ) { return NULL; } } #else ISC_STATUS* perr = fbc->status; while( isc_interprete( msg, &perr ) ) { if( ( len += snprintf( fbc->errmsg + len, FIREBIRD_ERRLEN - len, "%s. ", msg ) ) < 0 ) { return NULL; } } #endif return (const char*) fbc->errmsg; } /* * TODO: Find out if this is always correct * SQL error code -902 is returned if e.g. the server is down */ static int firebird_odbx_error_type( odbx_t* handle ) { switch( isc_sqlcode( ((struct fbconn*) handle->aux)->status ) ) { case 0: return 0; case -902: return -1; } return 1; } static int firebird_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { struct fbconn* fbc = (struct fbconn*) handle->aux; if( fbc == NULL ) { return -ODBX_ERR_PARAM; } fbc->qda->sqld = 0; fbc->stmt = NULL; if( isc_dsql_allocate_statement( fbc->status, &(handle->generic), &(fbc->stmt) ) != 0 ) { return -ODBX_ERR_BACKEND; } if( isc_dsql_prepare( fbc->status, fbc->tr + fbc->trlevel, &(fbc->stmt), (short) length, (char*) query, SQL_DIALECT_V6, fbc->qda ) != 0 ) { return -ODBX_ERR_BACKEND; } fbc->numstmt = 1; return ODBX_ERR_SUCCESS; } static int firebird_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { struct fbconn* fbc = (struct fbconn*) handle->aux; if( fbc == NULL ) { return -ODBX_ERR_PARAM; } if( fbc->numstmt == 0 ) { return ODBX_RES_DONE; /* no more results */ } (fbc->numstmt)--; if( ( *result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*result)->generic = NULL; (*result)->aux = NULL; if( fbc->qda->sqld == 0 ) { int err; if( ( err = firebird_priv_execute_stmt( handle, fbc ) ) != ODBX_ERR_SUCCESS ) { firebird_priv_result_free( *result ); *result = NULL; return err; } return ODBX_RES_NOROWS; // Not SELECT-like statement } if( ( (*result)->generic = malloc( XSQLDA_LENGTH( fbc->qda->sqld ) ) ) == NULL ) { firebird_priv_result_free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } ((XSQLDA*) (*result)->generic)->sqln = fbc->qda->sqld; ((XSQLDA*) (*result)->generic)->version = SQLDA_VERSION1; if( ( (*result)->aux = malloc( sizeof( struct fbaux ) ) ) == NULL ) { firebird_priv_result_free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } struct fbaux* fba = (struct fbaux*) (*result)->aux; if( ( fba->nullind = (short*) malloc( fbc->qda->sqld * sizeof( short ) ) ) == NULL ) { firebird_priv_result_free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } if( isc_dsql_describe( fbc->status, &(fbc->stmt), SQL_DIALECT_V6, (XSQLDA*) (*result)->generic ) != 0 ) { firebird_priv_result_free( *result ); *result = NULL; return -ODBX_ERR_BACKEND; } int i; XSQLVAR* var = ((XSQLDA*) (*result)->generic)->sqlvar; for( i = 0; i < fbc->qda->sqld; i++ ) { if( ( var[i].sqldata = (char*) malloc( firebird_priv_collength( var + i ) ) ) == NULL ) { while( --i >= 0 ) { free( var[i].sqldata ); } firebird_priv_result_free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } var[i].sqlind = fba->nullind + i; } if( isc_dsql_execute( fbc->status, fbc->tr + fbc->trlevel, &(fbc->stmt), SQL_DIALECT_V6, NULL ) != 0 ) { while( i >= 0 ) { free( var[i--].sqldata ); } firebird_priv_result_free( *result ); *result = NULL; return -ODBX_ERR_BACKEND; } return ODBX_RES_ROWS; /* result is available */ } static int firebird_odbx_result_finish( odbx_result_t* result ) { struct fbconn* fbc = (struct fbconn*) result->handle->aux; if( fbc != NULL ) { if( isc_dsql_free_statement( fbc->status, &(fbc->stmt), DSQL_drop ) != 0 ) { return -ODBX_ERR_BACKEND; } if( fbc->trlevel == 0 ) { static char tbuf[] = { isc_tpb_version3, isc_tpb_write, isc_tpb_read_committed, isc_tpb_rec_version }; if( isc_commit_transaction( fbc->status, fbc->tr ) != 0 ) { return -ODBX_ERR_BACKEND; } if( isc_start_transaction( fbc->status, fbc->tr + fbc->trlevel, 1, &(result->handle->generic), sizeof( tbuf ), tbuf ) != 0 ) { return -ODBX_ERR_BACKEND; } } } if( result->generic != NULL ) { unsigned long i; XSQLVAR* var = ((XSQLDA*) result->generic)->sqlvar; for( i = 0; i < ((XSQLDA*) result->generic)->sqln; i++ ) { free( var[i].sqldata ); } } firebird_priv_result_free( result ); return ODBX_ERR_SUCCESS; } static int firebird_odbx_row_fetch( odbx_result_t* result ) { struct fbconn* fbc = (struct fbconn*) result->handle->aux; if( fbc == NULL ) { return -ODBX_ERR_PARAM; } switch( isc_dsql_fetch( fbc->status, &(fbc->stmt), SQL_DIALECT_V6, (XSQLDA*) result->generic ) ) { case 0: break; case 100: case isc_req_sync: // Return DONE if function is called after no more rows are available return ODBX_ROW_DONE; default: return -ODBX_ERR_BACKEND; } int len; unsigned long i; struct tm tstmp; XSQLDA* da = (XSQLDA*) result->generic; for( i = 0; i < fbc->qda->sqld; i++ ) { switch( da->sqlvar[i].sqltype & ~1 ) { case SQL_SHORT: len = snprintf( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%hd", *((short*) da->sqlvar[i].sqldata) ); firebird_priv_decimal( da->sqlvar[i].sqldata, len, -(da->sqlvar[i].sqlscale) ); break; case SQL_LONG: len = snprintf( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%ld", *((long*) da->sqlvar[i].sqldata) ); firebird_priv_decimal( da->sqlvar[i].sqldata, len, -(da->sqlvar[i].sqlscale) ); break; case SQL_INT64: len = snprintf( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%lld", *((int64_t*) da->sqlvar[i].sqldata) ); firebird_priv_decimal( da->sqlvar[i].sqldata, len, -(da->sqlvar[i].sqlscale) ); break; case SQL_FLOAT: snprintf( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%f", *((float*) da->sqlvar[i].sqldata) ); break; case SQL_D_FLOAT: case SQL_DOUBLE: snprintf( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%f", *((double*) da->sqlvar[i].sqldata) ); break; case SQL_TYPE_DATE: isc_decode_sql_date( ((ISC_DATE*) da->sqlvar[i].sqldata), &tstmp ); strftime( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%Y-%m-%d", &tstmp ); break; case SQL_TYPE_TIME: isc_decode_sql_time( ((ISC_TIME*) da->sqlvar[i].sqldata), &tstmp ); strftime( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%H:%M:%S", &tstmp ); break; case SQL_TIMESTAMP: isc_decode_timestamp( ((ISC_TIMESTAMP*) da->sqlvar[i].sqldata), &tstmp ); strftime( da->sqlvar[i].sqldata, firebird_priv_collength( da->sqlvar + i ), "%Y-%m-%d %H:%M:%S", &tstmp ); break; case SQL_VARYING: len = isc_vax_integer( da->sqlvar[i].sqldata, 2 ); da->sqlvar[i].sqldata[len+2] = 0; break; case SQL_BLOB: break; default: da->sqlvar[i].sqldata[da->sqlvar[i].sqllen] = 0; } } return ODBX_ROW_NEXT; } static uint64_t firebird_odbx_rows_affected( odbx_result_t* result ) { char buffer[64] = { 0 }; static char info[] = { isc_info_sql_records, isc_info_end }; struct fbconn* fbc = (struct fbconn*) result->handle->aux; if( fbc == NULL || isc_dsql_sql_info( fbc->status, &(fbc->stmt), sizeof( info ), info, sizeof( buffer ), buffer ) != 0 ) { return 0; } if( buffer[0] == isc_info_sql_records ) { int len; uint64_t rows = 0; char* p = buffer + 3; while( *p != isc_info_end ) { len = isc_vax_integer( p + 1, 2 ); if( *p == isc_info_req_insert_count || *p == isc_info_req_update_count || *p == isc_info_req_delete_count ) { rows += isc_vax_integer( p + 3, len ); } p += len + 3; } return rows; } return 0; } static unsigned long firebird_odbx_column_count( odbx_result_t* result ) { if( result->generic != NULL ) { return (unsigned long) ((XSQLDA*) result->generic)->sqln; } return 0; } static const char* firebird_odbx_column_name( odbx_result_t* result, unsigned long pos ) { short len; XSQLDA* da = (XSQLDA*) result->generic; /* * This is not a perfect solution because the last character may get dropped * but is the most compatible solution */ if( da != NULL && pos < da->sqln ) { len = da->sqlvar[pos].aliasname_length; if( len > 31 ) { len = 31; } da->sqlvar[pos].aliasname[len] = '\0'; return (const char*) da->sqlvar[pos].aliasname; } return NULL; } static int firebird_odbx_column_type( odbx_result_t* result, unsigned long pos ) { XSQLDA* da = (XSQLDA*) result->generic; if( da == NULL || pos > da->sqln - 1 ) { return -ODBX_ERR_PARAM; } switch( da->sqlvar[pos].sqltype & ~1 ) { case SQL_SHORT: if( da->sqlvar[pos].sqlscale ) { return ODBX_TYPE_DECIMAL; } return ODBX_TYPE_SMALLINT; case SQL_LONG: if( da->sqlvar[pos].sqlscale ) { return ODBX_TYPE_DECIMAL; } return ODBX_TYPE_INTEGER; case SQL_INT64: if( da->sqlvar[pos].sqlscale ) { return ODBX_TYPE_DECIMAL; } return ODBX_TYPE_BIGINT; case SQL_FLOAT: return ODBX_TYPE_REAL; case SQL_D_FLOAT: case SQL_DOUBLE: return ODBX_TYPE_DOUBLE; case SQL_TEXT: return ODBX_TYPE_CHAR; case SQL_VARYING: return ODBX_TYPE_VARCHAR; case SQL_BLOB: if( da->sqlvar[pos].sqlsubtype == isc_blob_text ) { return ODBX_TYPE_CLOB; } return ODBX_TYPE_BLOB; case SQL_TYPE_TIME: return ODBX_TYPE_TIME; case SQL_TIMESTAMP: return ODBX_TYPE_TIMESTAMP; case SQL_TYPE_DATE: return ODBX_TYPE_DATE; case SQL_ARRAY: return ODBX_TYPE_ARRAY; } return ODBX_TYPE_UNKNOWN; } static unsigned long firebird_odbx_field_length( odbx_result_t* result, unsigned long pos ) { XSQLDA* da = (XSQLDA*) result->generic; if( da != NULL && pos < da->sqln ) { if( ( da->sqlvar[pos].sqltype & ~1 ) == SQL_VARYING ) { return (unsigned long) isc_vax_integer( da->sqlvar[pos].sqldata, 2 ); } return (unsigned long) da->sqlvar[pos].sqllen; } return 0; } static const char* firebird_odbx_field_value( odbx_result_t* result, unsigned long pos ) { XSQLDA* da = (XSQLDA*) result->generic; if( da != NULL && pos < da->sqln && da->sqlvar[pos].sqldata ) { if( da->sqlvar[pos].sqlind && *(da->sqlvar[pos].sqlind) == -1 ) { return NULL; } if( ( da->sqlvar[pos].sqltype & ~1 ) == SQL_VARYING ) { return da->sqlvar[pos].sqldata + 2; } return da->sqlvar[pos].sqldata; } return NULL; } /* * Private Firebird support functions */ static int firebird_priv_execute_stmt( odbx_t* handle, struct fbconn* fbc ) { char buffer[16] = { 0 }; static char info[] = { isc_info_sql_stmt_type }; static char tbuf[] = { isc_tpb_version3, isc_tpb_write, isc_tpb_read_committed, isc_tpb_rec_version }; if( isc_dsql_sql_info( fbc->status, &(fbc->stmt), sizeof( info ), info, sizeof( buffer ), buffer) != 0 ) { return -ODBX_ERR_BACKEND; } if( buffer[0] != isc_info_sql_stmt_type ) { return -ODBX_ERR_SIZE; } int type = isc_vax_integer( buffer + 3, (short) isc_vax_integer( buffer + 1, 2 ) ); switch( type ) { case isc_info_sql_stmt_start_trans: if( fbc->trlevel == FIREBIRD_MAXTRANS - 1 ) { return -ODBX_ERR_SIZE; } fbc->trlevel++; fbc->tr[fbc->trlevel] = 0; if( isc_start_transaction( fbc->status, fbc->tr + fbc->trlevel, 1, &(handle->generic), sizeof( tbuf ), tbuf ) != 0 ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; case isc_info_sql_stmt_commit: if( isc_commit_transaction( fbc->status, fbc->tr + fbc->trlevel ) != 0 ) { return -ODBX_ERR_BACKEND; } fbc->trlevel--; return ODBX_ERR_SUCCESS; case isc_info_sql_stmt_rollback: if( isc_rollback_transaction( fbc->status, fbc->tr + fbc->trlevel ) != 0 ) { return -ODBX_ERR_BACKEND; } fbc->trlevel--; return ODBX_ERR_SUCCESS; } if( isc_dsql_execute( fbc->status, fbc->tr + fbc->trlevel, &(fbc->stmt), SQL_DIALECT_V6, NULL ) != 0 ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static void firebird_priv_result_free( odbx_result_t* result ) { if( result->generic != NULL ) { free( result->generic ); result->generic = NULL; } if( result->aux != NULL ) { if( ((struct fbaux*) result->aux)->nullind ) { free( ((struct fbaux*) result->aux)->nullind ); } free( result->aux ); result->aux = NULL; } free( result ); } static int firebird_priv_collength( XSQLVAR* var ) { switch( var->sqltype & ~1 ) { case SQL_SHORT: // can be a decimal value return 8; case SQL_LONG: // can be a decimal value return 13; case SQL_INT64: // can be a decimal value return 23; case SQL_FLOAT: return 42; case SQL_D_FLOAT: case SQL_DOUBLE: return 312; case SQL_TYPE_DATE: return 11; case SQL_TYPE_TIME: return 9; case SQL_TIMESTAMP: return 20; case SQL_BLOB: return sizeof( ISC_QUAD ); default: return var->sqllen + 3; // -, . and \0 } } static const char* firebird_priv_decimal( char* buffer, int strlen, short scale ) { if( scale ) { memmove( buffer + strlen - scale + 1, buffer + strlen - scale, scale + 1 ); buffer[strlen-scale] = '.'; } return buffer; } opendbx-1.4.6/backends/firebird/firebird_lo.h0000644000175000017500000000130011425153447016073 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2007-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "firebirdbackend.h" #ifndef FIREBIRD_LO_H #define FIREBIRD_LO_H /* * Large object operations */ static int firebird_odbx_lo_open( odbx_result_t* result, odbx_lo_t** lo, const char* value ); static int firebird_odbx_lo_close( odbx_lo_t* lo ); static ssize_t firebird_odbx_lo_read( odbx_lo_t* lo, void* buffer, size_t buflen ); static ssize_t firebird_odbx_lo_write( odbx_lo_t* lo, void* buffer, size_t buflen ); #endif opendbx-1.4.6/backends/firebird/firebird_lo.c0000644000175000017500000000527711425153447016107 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2007-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbxdrv.h" #include "firebird_lo.h" #include /* * Declaration of Firebird capabilities */ struct odbx_lo_ops firebird_odbx_lo_ops = { .open = firebird_odbx_lo_open, .close = firebird_odbx_lo_close, .read = firebird_odbx_lo_read, .write = firebird_odbx_lo_write, }; /* * ODBX large object operations * Firebird style */ static int firebird_odbx_lo_open( odbx_result_t* result, odbx_lo_t** lo, const char* value ) { struct fbconn* fbc = (struct fbconn*) result->handle->aux; if( ( *lo = (odbx_lo_t*) malloc( sizeof( struct odbx_lo_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*lo)->generic = NULL; (*lo)->result = result; if( isc_open_blob2( fbc->status, &(result->handle->generic), fbc->tr + fbc->trlevel, &((*lo)->generic), (ISC_QUAD*) value, 0, NULL ) != 0 ) { free( *lo ); *lo = NULL; return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int firebird_odbx_lo_close( odbx_lo_t* lo ) { if( isc_close_blob( ((struct fbconn*) lo->result->handle->aux)->status, &(lo->generic) ) != 0 ) { return -ODBX_ERR_BACKEND; } free( lo ); return ODBX_ERR_SUCCESS; } /* static uint64_t firebird_odbx_lo_length( odbx_lo_t* lo ) { char buffer[20] = { 0 }; char items[] = { isc_info_blob_total_length }; struct fbconn* fbc = (struct fbconn*) lo->handle->aux; if( isc_blob_info( fbc->status, &(lo->generic), (short) sizeof( items ), items, (short) sizeof( buffer ), buffer ) != 0 ) { return -ODBX_ERR_BACKEND; } if( buffer[0] == isc_info_blob_total_length ) { return isc_vax_integer( buffer + 3, isc_vax_integer( buffer + 1, 2 ) ); } return 0; } */ static ssize_t firebird_odbx_lo_read( odbx_lo_t* lo, void* buffer, size_t buflen ) { long err; unsigned short len, bytes = 0; struct fbconn* fbc = (struct fbconn*) lo->result->handle->aux; if( buflen > 0xFFFF ) { len = 0xFFFF; } else { len = buflen; } err = isc_get_segment( fbc->status, &(lo->generic), &bytes, len, (char*) buffer ); if( fbc->status[1] == isc_segstr_eof ) { return 0; } if( err != 0 ) { return -ODBX_ERR_BACKEND; } return bytes; } static ssize_t firebird_odbx_lo_write( odbx_lo_t* lo, void* buffer, size_t buflen ) { unsigned short len; struct fbconn* fbc = (struct fbconn*) lo->result->handle->aux; if( buflen > 0xFFFF ) { len = 0xFFFF; } else { len = (unsigned short) buflen; } if( isc_put_segment( fbc->status, &(lo->generic), len, (char*) buffer ) != 0 ) { return -ODBX_ERR_BACKEND; } return len; } opendbx-1.4.6/backends/firebird/firebirdbackend.h0000644000175000017500000000252111425153447016717 00000000000000/* * Firebird driver for OpenDBX * Copyright (C) 2005-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include #ifndef FIREBIRDBACKEND_H #define FIREBIRDBACKEND_H #define FIREBIRD_BUFLEN 1023 #define FIREBIRD_ERRLEN 512 #define FIREBIRD_MAXTRANS 8 /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct fbconn { int srvlen; char* path; int trlevel; isc_tr_handle tr[FIREBIRD_MAXTRANS]; isc_stmt_handle stmt; int numstmt; XSQLDA* qda; ISC_STATUS_ARRAY status; char errmsg[FIREBIRD_ERRLEN]; }; struct fbaux { short* nullind; }; #endif opendbx-1.4.6/backends/firebird/firebird_basic.h0000644000175000017500000000416311425153447016554 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2005-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "firebirdbackend.h" #ifndef FIREBIRD_BASIC_H #define FIREBIRD_BASIC_H /* * Basic operations */ static int firebird_odbx_init( odbx_t* handle, const char* host, const char* port ); static int firebird_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int firebird_odbx_unbind( odbx_t* handle ); static int firebird_odbx_finish( odbx_t* handle ); static int firebird_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int firebird_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* firebird_odbx_error( odbx_t* handle ); static int firebird_odbx_error_type( odbx_t* handle ); static int firebird_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int firebird_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int firebird_odbx_result_finish( odbx_result_t* result ); static int firebird_odbx_row_fetch( odbx_result_t* result ); static uint64_t firebird_odbx_rows_affected( odbx_result_t* result ); static unsigned long firebird_odbx_column_count( odbx_result_t* result ); static const char* firebird_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int firebird_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long firebird_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* firebird_odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * Private firebird support functions */ static int firebird_priv_execute_stmt( odbx_t* handle, struct fbconn* fbc ); static void firebird_priv_result_free( odbx_result_t* result ); static int firebird_priv_collength( XSQLVAR* var ); static const char* firebird_priv_decimal( char* buffer, int strlen, short scale ); #endif opendbx-1.4.6/backends/Makefile.in0000644000175000017500000004333111765211300013721 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ DIST_SUBDIRS = mysql pgsql sqlite sqlite3 firebird mssql sybase oracle odbc SUBDIRS = @backends@ all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/mssql/0000755000175000017500000000000011765214161013077 500000000000000opendbx-1.4.6/backends/mssql/Makefile.in0000644000175000017500000005154411765211301015066 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/mssql DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libmssqlbackend_la_DEPENDENCIES = am_libmssqlbackend_la_OBJECTS = libmssqlbackend_la-mssqlbackend.lo \ libmssqlbackend_la-mssql_basic.lo libmssqlbackend_la_OBJECTS = $(am_libmssqlbackend_la_OBJECTS) libmssqlbackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libmssqlbackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libmssqlbackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libmssqlbackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libmssqlbackend_la_SOURCES) DIST_SOURCES = $(libmssqlbackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libmssqlbackend.la @SINGLELIB_FALSE@libmssqlbackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libmssqlbackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libmssqlbackend.la @SINGLELIB_FALSE@libmssqlbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libmssqlbackend_la_SOURCES = mssqlbackend.h mssqlbackend.c mssql_basic.h mssql_basic.c libmssqlbackend_la_LIBADD = -l@LIBMSSQL@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/mssql/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/mssql/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libmssqlbackend.la: $(libmssqlbackend_la_OBJECTS) $(libmssqlbackend_la_DEPENDENCIES) $(libmssqlbackend_la_LINK) $(am_libmssqlbackend_la_rpath) $(libmssqlbackend_la_OBJECTS) $(libmssqlbackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libmssqlbackend_la-mssql_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libmssqlbackend_la-mssqlbackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libmssqlbackend_la-mssqlbackend.lo: mssqlbackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmssqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libmssqlbackend_la-mssqlbackend.lo -MD -MP -MF $(DEPDIR)/libmssqlbackend_la-mssqlbackend.Tpo -c -o libmssqlbackend_la-mssqlbackend.lo `test -f 'mssqlbackend.c' || echo '$(srcdir)/'`mssqlbackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libmssqlbackend_la-mssqlbackend.Tpo $(DEPDIR)/libmssqlbackend_la-mssqlbackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mssqlbackend.c' object='libmssqlbackend_la-mssqlbackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmssqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libmssqlbackend_la-mssqlbackend.lo `test -f 'mssqlbackend.c' || echo '$(srcdir)/'`mssqlbackend.c libmssqlbackend_la-mssql_basic.lo: mssql_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmssqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libmssqlbackend_la-mssql_basic.lo -MD -MP -MF $(DEPDIR)/libmssqlbackend_la-mssql_basic.Tpo -c -o libmssqlbackend_la-mssql_basic.lo `test -f 'mssql_basic.c' || echo '$(srcdir)/'`mssql_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libmssqlbackend_la-mssql_basic.Tpo $(DEPDIR)/libmssqlbackend_la-mssql_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mssql_basic.c' object='libmssqlbackend_la-mssql_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmssqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libmssqlbackend_la-mssql_basic.lo `test -f 'mssql_basic.c' || echo '$(srcdir)/'`mssql_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/mssql/Makefile.am0000644000175000017500000000074511425153447015063 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libmssqlbackend.la libmssqlbackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libmssqlbackend.la libmssqlbackend_la_CPPFLAGS = libmssqlbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libmssqlbackend_la_SOURCES = mssqlbackend.h mssqlbackend.c mssql_basic.h mssql_basic.c libmssqlbackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libmssqlbackend_la_LIBADD = -l@LIBMSSQL@ opendbx-1.4.6/backends/mssql/mssqlbackend.h0000644000175000017500000000251211425153447015641 00000000000000/* * MSSQL (dblib) driver for OpenDBX * Copyright (C) 2006-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #include #include #include #ifndef MSSQLBACKEND_H #define MSSQLBACKEND_H #define MSSQL_MSGLEN 512 /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct tdsconn { char errmsg[MSSQL_MSGLEN]; int msg; int errtype; int firstresult; char* host; LOGINREC* login; }; struct tdsgres { DBINT length; BYTE* value; short ind; short mlen; }; struct tdsares { DBINT cols; }; #endif opendbx-1.4.6/backends/mssql/mssql_basic.c0000644000175000017500000003667111751510665015503 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "mssql_basic.h" #include #include #include /* * Declaration of MSSQL capabilities */ struct odbx_basic_ops mssql_odbx_basic_ops = { .init = mssql_odbx_init, .bind = mssql_odbx_bind, .unbind = mssql_odbx_unbind, .finish = mssql_odbx_finish, .get_option = mssql_odbx_get_option, .set_option = mssql_odbx_set_option, .error = mssql_odbx_error, .error_type = mssql_odbx_error_type, .escape = mssql_odbx_escape, .query = mssql_odbx_query, .result = mssql_odbx_result, .result_finish = mssql_odbx_result_finish, .rows_affected = mssql_odbx_rows_affected, .row_fetch = mssql_odbx_row_fetch, .column_count = mssql_odbx_column_count, .column_name = mssql_odbx_column_name, .column_type = mssql_odbx_column_type, .field_length = mssql_odbx_field_length, .field_value = mssql_odbx_field_value, }; /* * Private mssql error messages */ static const char* mssql_odbx_errmsg[] = { gettext_noop("Connecting to server failed") }; /* * ODBX basic operations * MSSQL (dblib) style */ static int mssql_odbx_init( odbx_t* handle, const char* host, const char* port ) { int len; struct tdsconn* tc; if( host == NULL ) { return -ODBX_ERR_PARAM; } handle->aux = NULL; handle->generic = NULL; if( dbinit() == FAIL ) { return -ODBX_ERR_NOMEM; } dbmsghandle( mssql_msg_handler ); dberrhandle( mssql_err_handler ); if( ( tc = (struct tdsconn*) malloc( sizeof( struct tdsconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } tc->msg = 0; tc->errtype = 0; tc->firstresult = 0; len = strlen( host ) + 1; if( ( tc->host = malloc( len ) ) == NULL ) { free( tc ); return -ODBX_ERR_NOMEM; } memcpy( tc->host, host, len ); if( ( tc->login = dblogin() ) == NULL ) { free( tc->host ); free( tc ); return -ODBX_ERR_NOMEM; } DBSETLHOST( tc->login, (char*) host ); handle->aux = (void*) tc; return ODBX_ERR_SUCCESS; } static int mssql_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { struct tdsconn* tc = (struct tdsconn*) handle->aux; if( tc == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } DBSETLUSER( tc->login, (char*) who ); DBSETLPWD( tc->login, (char*) cred ); DBSETLAPP( tc->login, "OpenDBX" ); if( ( handle->generic = (void*) dbopen( tc->login, tc->host ) ) == NULL ) { memcpy( tc->errmsg, dgettext( "opendbx", mssql_odbx_errmsg[0] ), strlen( dgettext( "opendbx", mssql_odbx_errmsg[0] ) ) + 1 ); tc->errtype = 1; return -ODBX_ERR_BACKEND; } dbsetuserdata( (DBPROCESS*) handle->generic, (BYTE*) tc ); if( dbuse( (DBPROCESS*) handle->generic, (char*) database ) == FAIL ) { dbclose( (DBPROCESS*) handle->generic ); handle->generic = NULL; return -ODBX_ERR_BACKEND; } int err; if( ( err = mssql_priv_ansimode( handle ) ) < 0 ) { dbclose( (DBPROCESS*) handle->generic ); handle->generic = NULL; return err; } return ODBX_ERR_SUCCESS; } static int mssql_odbx_unbind( odbx_t* handle ) { dbclose( (DBPROCESS*) handle->generic ); return ODBX_ERR_SUCCESS; } static int mssql_odbx_finish( odbx_t* handle ) { if( handle->aux != NULL ) { dbloginfree( (LOGINREC*) ((struct tdsconn*) handle->aux)->login ); dbexit(); free( ((struct tdsconn*) handle->aux)->host ); free( handle->aux ); handle->aux = NULL; return ODBX_ERR_SUCCESS; } return -ODBX_ERR_PARAM; } static int mssql_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_TLS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: *((int*) value) = ODBX_DISABLE; break; case ODBX_OPT_THREAD_SAFE: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_CONNECT_TIMEOUT: *((int*) value) = ODBX_ENABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int mssql_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: return -ODBX_ERR_OPTWR; case ODBX_OPT_MULTI_STATEMENTS: return ODBX_ERR_SUCCESS; case ODBX_OPT_CONNECT_TIMEOUT: if( dbsetlogintime( *((int*) value) ) != SUCCEED ) { return ODBX_ERR_OPTWR; } break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static const char* mssql_odbx_error( odbx_t* handle ) { struct tdsconn* aux = (struct tdsconn*) handle->aux; if( aux != NULL ) { aux->msg = 0; return aux->errmsg; } return NULL; } static int mssql_odbx_error_type( odbx_t* handle ) { if( handle->aux != NULL ) { return ((struct tdsconn*) handle->aux)->errtype; } return -1; } static int mssql_odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ) { if( tolen == NULL ) { return -ODBX_ERR_PARAM; } if( dbsafestr( (DBPROCESS*) handle->generic, (char*) from, fromlen, to, *tolen, DBSINGLE ) == FAIL ) { return -ODBX_ERR_BACKEND; } *tolen = strlen( to ); return ODBX_ERR_SUCCESS; } static int mssql_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { DBPROCESS* dbproc = (DBPROCESS*) handle->generic; struct tdsconn* aux = (struct tdsconn*) handle->aux; if( aux == NULL ) { return -ODBX_ERR_HANDLE; } if( dbcmd( dbproc, (char*) query ) == FAIL ) { return -ODBX_ERR_BACKEND; } if( dbsqlsend( dbproc ) == FAIL ) { return -ODBX_ERR_BACKEND; } aux->firstresult = 1; return ODBX_ERR_SUCCESS; } static int mssql_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { DBPROCESS* dbproc = (DBPROCESS*) handle->generic; struct tdsconn* caux = (struct tdsconn*) handle->aux; if( caux->firstresult ) { long ms = -1; int reason = DBRESULT; DBPROCESS* cdbproc; if( timeout != NULL ) { ms = timeout->tv_sec * 1000 + timeout->tv_usec / 1000; } if( dbpoll( dbproc, ms, &cdbproc, &reason ) == FAIL ) { return -ODBX_ERR_BACKEND; } if( reason != DBRESULT ) { return ODBX_RES_TIMEOUT; } // timeout caux->firstresult = 0; if( dbsqlok( dbproc ) == FAIL ) { return -ODBX_ERR_BACKEND; } } switch( dbresults( dbproc ) ) { case SUCCEED: break; case NO_MORE_RESULTS: return ODBX_RES_DONE; // no more results default: return -ODBX_ERR_BACKEND; } if( ( *result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*result)->generic = NULL; (*result)->aux = NULL; if( DBCMDROW( dbproc ) == FAIL ) { return ODBX_RES_NOROWS; // Not SELECT like query } if( ( (*result)->aux = malloc( sizeof( struct tdsares ) ) ) == NULL ) { free( (*result)->aux ); return -ODBX_ERR_NOMEM; } struct tdsares* aux = (struct tdsares*) (*result)->aux; if( ( aux->cols = dbnumcols( (DBPROCESS*) handle->generic ) ) == FAIL ) { free( (*result)->aux ); free( *result ); return -ODBX_ERR_BACKEND; } if( ( (*result)->generic = malloc( aux->cols * sizeof( struct tdsgres ) ) ) == NULL ) { free( (*result)->aux ); free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } struct tdsgres* gres = (struct tdsgres*) (*result)->generic; for( int i = 0; i < aux->cols; i++ ) { gres[i].mlen = mssql_priv_collength( (DBPROCESS*) handle->generic, i ); gres[i].length = 0; gres[i].ind = 0; if( ( gres[i].value = malloc( gres[i].mlen ) ) == NULL ) { gres[i].mlen = 0; mssql_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } } return ODBX_RES_ROWS; // result is available } static int mssql_odbx_result_finish( odbx_result_t* result ) { DBINT i, cols = 0; if( result->aux != NULL ) { cols = ((struct tdsares*) result->aux)->cols; free( result->aux ); result->aux = NULL; } if( result->generic != NULL ) { struct tdsgres* gres = (struct tdsgres*) result->generic; for( i = 0; i < cols; i++ ) { if( gres[i].value != NULL ) { free( gres[i].value ); gres[i].value = NULL; } } free( result->generic ); result->generic = NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int mssql_odbx_row_fetch( odbx_result_t* result ) { if( result->handle == NULL || result->aux == NULL ) { return -ODBX_ERR_PARAM; } DBPROCESS* dbproc = (DBPROCESS*) result->handle->generic; switch( dbnextrow( dbproc ) ) { case BUF_FULL: case REG_ROW: break; case NO_MORE_ROWS: return ODBX_ROW_DONE; case FAIL: default: return -ODBX_ERR_BACKEND; } DBINT i, dlen; BYTE* data; DBDATEREC di; struct tdsgres* gres = (struct tdsgres*) result->generic; struct tdsares* ares = (struct tdsares*) result->aux; for( i = 0; i < ares->cols; i++ ) { if( ( dlen = dbdatlen( dbproc, i+1 ) ) == -1 ) { return -ODBX_ERR_SIZE; } if( ( data = dbdata( dbproc, i+1 ) ) == NULL && dlen == 0 ) { gres[i].ind = 1; // column is NULL gres[i].length = 0; continue; } switch( dbcoltype( dbproc, i+1 ) ) { case SYBDATETIME4: case SYBDATETIME: case SYBDATETIMN: if( dbdatecrack( dbproc, &di, (DBDATETIME*) data ) != FAIL ) { #ifdef HAVE_LIBSYBDB_MSLIB gres[i].length = snprintf( (char*) gres[i].value, gres[i].mlen, "%.4ld-%.2ld-%.2ld %.2ld:%.2ld:%.2ld", (long) di.year, (long) di.month+1, (long) di.day, (long) di.hour, (long) di.minute, (long) di.second ); #else gres[i].length = snprintf( (char*) gres[i].value, gres[i].mlen, "%.4ld-%.2ld-%.2ld %.2ld:%.2ld:%.2ld", (long) di.dateyear, (long) di.datemonth+1, (long) di.datedmonth, (long) di.datehour, (long) di.dateminute, (long) di.datesecond ); #endif } continue; } if( gres[i].mlen < dlen + 1 ) { if( ( gres[i].value = realloc( gres[i].value, dlen + 1 ) ) == NULL ) { gres[i].mlen = 0; return -ODBX_ERR_NOMEM; } gres[i].mlen = dlen + 1; } gres[i].length = dbconvert( dbproc, dbcoltype( dbproc, i+1 ), data, dlen, SYBVARCHAR, gres[i].value, gres[i].mlen ); gres[i].value[gres[i].length] = 0; gres[i].ind = 0; // column is not NULL } return ODBX_ROW_NEXT; } static uint64_t mssql_odbx_rows_affected( odbx_result_t* result ) { if( result->handle != NULL ) { int count; if( ( count = DBCOUNT( (DBPROCESS*) result->handle->generic ) ) > 0 ) { return (uint64_t) count; } } return 0; } static unsigned long mssql_odbx_column_count( odbx_result_t* result ) { if( result->aux != NULL ) { return (unsigned long) ((struct tdsares*) result->aux)->cols; } return 0; } static const char* mssql_odbx_column_name( odbx_result_t* result, unsigned long pos ) { if( result->handle != NULL ) { return dbcolname( (DBPROCESS*) result->handle->generic, pos+1 ); } return NULL; } static int mssql_odbx_column_type( odbx_result_t* result, unsigned long pos ) { if( result->handle == NULL ) { return -ODBX_ERR_PARAM; } switch( dbcoltype( (DBPROCESS*) result->handle->generic, pos+1 ) ) { case -1: case 0: return -ODBX_ERR_BACKEND; case SYBBIT: return ODBX_TYPE_BOOLEAN; case SYBINT1: case SYBINT2: return ODBX_TYPE_SMALLINT; case SYBINT4: return ODBX_TYPE_INTEGER; #ifdef SYBINT8 case SYBINT8: #endif case SYBINTN: return ODBX_TYPE_BIGINT; case SYBMONEY: case SYBMONEY4: case SYBMONEYN: case SYBNUMERIC: case SYBDECIMAL: return ODBX_TYPE_DECIMAL; case SYBREAL: return ODBX_TYPE_REAL; case SYBFLT8: return ODBX_TYPE_DOUBLE; case SYBFLTN: return ODBX_TYPE_FLOAT; case SYBCHAR: #ifdef SYBLONGCHAR case SYBLONGCHAR: #endif return ODBX_TYPE_CHAR; case SYBVARCHAR: return ODBX_TYPE_VARCHAR; case SYBTEXT: return ODBX_TYPE_CLOB; case SYBIMAGE: case SYBBINARY: case SYBVARBINARY: #ifdef SYBLONGBINARY case SYBLONGBINARY: #endif return ODBX_TYPE_BLOB; case SYBDATETIME4: case SYBDATETIME: case SYBDATETIMN: return ODBX_TYPE_TIMESTAMP; default: return ODBX_TYPE_UNKNOWN; } } static unsigned long mssql_odbx_field_length( odbx_result_t* result, unsigned long pos ) { struct tdsares* ares = (struct tdsares*) result->aux; if( result->generic != NULL && ares != NULL && pos < ares->cols ) { return (unsigned long) ((struct tdsgres*) result->generic)[pos].length; } return -ODBX_ERR_PARAM; } static const char* mssql_odbx_field_value( odbx_result_t* result, unsigned long pos ) { struct tdsgres* gres = (struct tdsgres*) result->generic; struct tdsares* ares = (struct tdsares*) result->aux; if( gres != NULL && ares != NULL && pos < ares->cols && !gres[pos].ind ) { return (const char*) gres[pos].value; } return NULL; } static int mssql_priv_ansimode( odbx_t* handle ) { int err; DBPROCESS* dbproc = (DBPROCESS*) handle->generic; if( dbsetopt( dbproc, DBDATEFORMAT, "ymd", -1 ) == FAIL ) { return -ODBX_ERR_BACKEND; } if( dbcmd( dbproc, "SET QUOTED_IDENTIFIER ON" ) == FAIL ) { return -ODBX_ERR_BACKEND; } if( dbsqlexec( dbproc ) == FAIL ) { return -ODBX_ERR_BACKEND; } while( ( err = dbresults( dbproc ) ) != NO_MORE_RESULTS ) { switch( err ) { case SUCCEED: if( DBCMDROW( dbproc ) == SUCCEED ) { while( dbnextrow( dbproc ) != NO_MORE_ROWS ); } break; default: return -ODBX_ERR_BACKEND; } } return ODBX_ERR_SUCCESS; } static int mssql_priv_collength( DBPROCESS* dbproc, unsigned long pos ) { switch( dbcoltype( dbproc, pos+1 ) ) { case -1: case 0: return 0; case SYBBIT: return 2; case SYBINT1: return 5; case SYBINT2: return 7; case SYBINT4: return 12; #ifdef SYBINT8 case SYBINT8: #endif case SYBINTN: return 22; case SYBMONEY: case SYBMONEY4: case SYBMONEYN: return 25; case SYBNUMERIC: case SYBDECIMAL: return 80; case SYBREAL: return 42; case SYBFLT8: case SYBFLTN: return 312; case SYBDATETIME4: case SYBDATETIME: case SYBDATETIMN: return 20; case SYBCHAR: case SYBVARCHAR: case SYBTEXT: case SYBIMAGE: case SYBBINARY: case SYBVARBINARY: return 32; // Variable length types, initial size default: return 12; } } static int mssql_err_handler( DBPROCESS* dbproc, int severity, int dberr, int oserr, char* dberrstr, char* oserrstr ) { struct tdsconn* tc = (struct tdsconn*) dbgetuserdata( dbproc ); if( tc == NULL || tc->errmsg == NULL ) { fprintf( stderr, "mssql_err_handler(): error = %s\n", dberrstr ); if( oserr != DBNOERR ) { fprintf( stderr, "mssql_err_handler(): OS error = %s\n", dberrstr ); } return INT_CANCEL; } int len; if( !(tc->msg) && ( len = snprintf( tc->errmsg, MSSQL_MSGLEN, "%s", dberrstr ) ) < MSSQL_MSGLEN && oserr != DBNOERR ) { snprintf( tc->errmsg + len, MSSQL_MSGLEN - len, ", %s", oserrstr ); } tc->errtype = 1; if( severity > 16 ) { tc->errtype = -1; } return INT_CANCEL; } static int mssql_msg_handler( DBPROCESS* dbproc, DBINT num, int state, int lvl, char* dberrstr, char* srvname, char* proc, int line ) { switch( num ) { case 5701: // Changed database to case 5703: // Changed language to return 0; } struct tdsconn* tc = (struct tdsconn*) dbgetuserdata( dbproc ); if( tc == NULL || tc->errmsg == NULL ) { fprintf( stderr, "mssql_msg_handler(): msg = %s\n", dberrstr ); return 0; } int len; if( ( len = snprintf( tc->errmsg, MSSQL_MSGLEN, "[%s]", srvname ) ) < MSSQL_MSGLEN ) { snprintf( tc->errmsg + len, MSSQL_MSGLEN - len, " %s", dberrstr ); } tc->msg = 1; return 0; } opendbx-1.4.6/backends/mssql/mssql_basic.h0000644000175000017500000000437111425153447015477 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "mssqlbackend.h" #ifndef MSSQL_BASIC_H #define MSSQL_BASIC_H /* * Basic operations */ static int mssql_odbx_init( odbx_t* handle, const char* host, const char* port ); static int mssql_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int mssql_odbx_unbind( odbx_t* handle ); static int mssql_odbx_finish( odbx_t* handle ); static int mssql_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int mssql_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* mssql_odbx_error( odbx_t* handle ); static int mssql_odbx_error_type( odbx_t* handle ); static int mssql_odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ); static int mssql_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int mssql_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int mssql_odbx_result_finish( odbx_result_t* result ); static int mssql_odbx_row_fetch( odbx_result_t* result ); static uint64_t mssql_odbx_rows_affected( odbx_result_t* result ); static unsigned long mssql_odbx_column_count( odbx_result_t* result ); static const char* mssql_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int mssql_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long mssql_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* mssql_odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * Private functions */ static int mssql_priv_ansimode( odbx_t* handle ); static int mssql_priv_collength( DBPROCESS* dbproc, unsigned long pos ); static int mssql_err_handler( DBPROCESS* dbproc, int lvl, int dberr, int oserr, char* dbstr, char* osstr ); static int mssql_msg_handler( DBPROCESS* dbproc, DBINT num, int state, int lvl, char* dberrstr, char* srvname, char* proc, int line ); #endif opendbx-1.4.6/backends/mssql/mssqlbackend.c0000644000175000017500000000111111425153447015626 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "mssqlbackend.h" /* * Declaration of MSSQL capabilities */ extern struct odbx_basic_ops mssql_odbx_basic_ops; struct odbx_ops mssql_odbx_ops = { .basic = &mssql_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &mssql_odbx_ops; } #endif opendbx-1.4.6/backends/Makefile.am0000644000175000017500000000014111425153446013711 00000000000000DIST_SUBDIRS = mysql pgsql sqlite sqlite3 firebird mssql sybase oracle odbc SUBDIRS = @backends@ opendbx-1.4.6/backends/pgsql/0000755000175000017500000000000011765214161013066 500000000000000opendbx-1.4.6/backends/pgsql/Makefile.in0000644000175000017500000005154411765211301015055 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/pgsql DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libpgsqlbackend_la_DEPENDENCIES = am_libpgsqlbackend_la_OBJECTS = libpgsqlbackend_la-pgsqlbackend.lo \ libpgsqlbackend_la-pgsql_basic.lo libpgsqlbackend_la_OBJECTS = $(am_libpgsqlbackend_la_OBJECTS) libpgsqlbackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libpgsqlbackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libpgsqlbackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libpgsqlbackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libpgsqlbackend_la_SOURCES) DIST_SOURCES = $(libpgsqlbackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libpgsqlbackend.la @SINGLELIB_FALSE@libpgsqlbackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libpgsqlbackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libpgsqlbackend.la @SINGLELIB_FALSE@libpgsqlbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libpgsqlbackend_la_SOURCES = pgsqlbackend.h pgsqlbackend.c pgsql_basic.h pgsql_basic.c libpgsqlbackend_la_LIBADD = -l@LIBPGSQL@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/pgsql/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/pgsql/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libpgsqlbackend.la: $(libpgsqlbackend_la_OBJECTS) $(libpgsqlbackend_la_DEPENDENCIES) $(libpgsqlbackend_la_LINK) $(am_libpgsqlbackend_la_rpath) $(libpgsqlbackend_la_OBJECTS) $(libpgsqlbackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpgsqlbackend_la-pgsql_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpgsqlbackend_la-pgsqlbackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libpgsqlbackend_la-pgsqlbackend.lo: pgsqlbackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libpgsqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libpgsqlbackend_la-pgsqlbackend.lo -MD -MP -MF $(DEPDIR)/libpgsqlbackend_la-pgsqlbackend.Tpo -c -o libpgsqlbackend_la-pgsqlbackend.lo `test -f 'pgsqlbackend.c' || echo '$(srcdir)/'`pgsqlbackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libpgsqlbackend_la-pgsqlbackend.Tpo $(DEPDIR)/libpgsqlbackend_la-pgsqlbackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pgsqlbackend.c' object='libpgsqlbackend_la-pgsqlbackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libpgsqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libpgsqlbackend_la-pgsqlbackend.lo `test -f 'pgsqlbackend.c' || echo '$(srcdir)/'`pgsqlbackend.c libpgsqlbackend_la-pgsql_basic.lo: pgsql_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libpgsqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libpgsqlbackend_la-pgsql_basic.lo -MD -MP -MF $(DEPDIR)/libpgsqlbackend_la-pgsql_basic.Tpo -c -o libpgsqlbackend_la-pgsql_basic.lo `test -f 'pgsql_basic.c' || echo '$(srcdir)/'`pgsql_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libpgsqlbackend_la-pgsql_basic.Tpo $(DEPDIR)/libpgsqlbackend_la-pgsql_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pgsql_basic.c' object='libpgsqlbackend_la-pgsql_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libpgsqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libpgsqlbackend_la-pgsql_basic.lo `test -f 'pgsql_basic.c' || echo '$(srcdir)/'`pgsql_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/pgsql/Makefile.am0000644000175000017500000000074511425153450015044 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libpgsqlbackend.la libpgsqlbackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libpgsqlbackend.la libpgsqlbackend_la_CPPFLAGS = libpgsqlbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libpgsqlbackend_la_SOURCES = pgsqlbackend.h pgsqlbackend.c pgsql_basic.h pgsql_basic.c libpgsqlbackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libpgsqlbackend_la_LIBADD = -l@LIBPGSQL@ opendbx-1.4.6/backends/pgsql/pgsqlbackend.c0000644000175000017500000000111711425153450015604 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "pgsqlbackend.h" /* * Declaration of PostgreSQL capabilities */ extern struct odbx_basic_ops pgsql_odbx_basic_ops; struct odbx_ops pgsql_odbx_ops = { .basic = &pgsql_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &pgsql_odbx_ops; } #endif opendbx-1.4.6/backends/pgsql/pgsql_basic.c0000644000175000017500000002542611765207150015452 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "pgsql_basic.h" #include #include #include #include #include #if defined( HAVE_SYS_SELECT_H ) #include #elif defined( HAVE_WINSOCK2_H ) #include #endif /* * Declaration of PostgreSQL capabilities */ struct odbx_basic_ops pgsql_odbx_basic_ops = { .init = pgsql_odbx_init, .bind = pgsql_odbx_bind, .unbind = pgsql_odbx_unbind, .finish = pgsql_odbx_finish, .get_option = pgsql_odbx_get_option, .set_option = pgsql_odbx_set_option, .error = pgsql_odbx_error, .error_type = pgsql_odbx_error_type, .escape = pgsql_odbx_escape, .query = pgsql_odbx_query, .result = pgsql_odbx_result, .result_finish = pgsql_odbx_result_finish, .rows_affected = pgsql_odbx_rows_affected, .row_fetch = pgsql_odbx_row_fetch, .column_count = pgsql_odbx_column_count, .column_name = pgsql_odbx_column_name, .column_type = pgsql_odbx_column_type, .field_length = pgsql_odbx_field_length, .field_value = pgsql_odbx_field_value, }; /* * ODBX basic operations * PostgreSQL style */ static int pgsql_odbx_init( odbx_t* handle, const char* host, const char* port ) { size_t len = 0; struct pgconn* conn; if( ( handle->aux = malloc( sizeof( struct pgconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } conn = (struct pgconn*) handle->aux; if( host != NULL ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, "host='%s'", host ); } if( port != NULL ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, " port='%s'", port ); } conn->infolen = len; conn->timeout = 0; conn->ssl = 0; return ODBX_ERR_SUCCESS; } static int pgsql_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } if( handle->aux == NULL ) { return -ODBX_ERR_PARAM; } struct pgconn* conn = (struct pgconn*) handle->aux; size_t len = conn->infolen; if( database != NULL ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, " dbname='%s'", database ); } if( who != NULL ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, " user='%s'", who ); } if( cred != NULL ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, " password='%s'", cred ); } if( conn->ssl == ODBX_TLS_ALWAYS ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, " requiressl=1" ); } if( conn->timeout != 0 ) { len += snprintf( conn->info + len, PGSQL_BUFLEN - len, " connect_timeout=%u", conn->timeout ); } if( len > PGSQL_BUFLEN ) { return -ODBX_ERR_SIZE; } conn->info[len] = '\0'; if( ( handle->generic = (void*) PQconnectdb( (const char*) conn->info ) ) == NULL ) { return -ODBX_ERR_NOMEM; } if( PQstatus( (PGconn*) handle->generic ) != CONNECTION_OK ) { conn->errtype = -1; return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int pgsql_odbx_unbind( odbx_t* handle ) { PQfinish( handle->generic ); handle->generic = NULL; return ODBX_ERR_SUCCESS; } static int pgsql_odbx_finish( odbx_t* handle ) { if( handle->aux == NULL ) { return -ODBX_ERR_PARAM; } // Clean up if bind() returned a backend error if( handle->generic != NULL ) { PQfinish( handle->generic ); handle->generic = NULL; } free( handle->aux ); handle->aux = NULL; return ODBX_ERR_SUCCESS; } static int pgsql_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_THREAD_SAFE: #ifdef HAVE_PQ_ESCAPE_STRING_CONN *(int*) value = ODBX_ENABLE; #else *(int*) value = ODBX_DISABLE; #endif break; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_CONNECT_TIMEOUT: *(int*) value = ODBX_ENABLE; break; case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: *(int*) value = ODBX_DISABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int pgsql_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { if( handle->aux == NULL ) { return -ODBX_ERR_PARAM; } switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: ((struct pgconn*) handle->aux)->ssl = *(unsigned int*) value; return ODBX_ERR_SUCCESS; case ODBX_OPT_CONNECT_TIMEOUT: ((struct pgconn*) handle->aux)->timeout = *(unsigned int*) value; return ODBX_ERR_SUCCESS; case ODBX_OPT_MULTI_STATEMENTS: if( *((int*) value) ) { return ODBX_ERR_SUCCESS; } break; case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: return -ODBX_ERR_OPTWR; default: return -ODBX_ERR_OPTION; } return -ODBX_ERR_OPTWR; } static const char* pgsql_odbx_error( odbx_t* handle ) { if( handle->generic != NULL ) { return PQerrorMessage( (const PGconn*) handle->generic ); } return NULL; } static int pgsql_odbx_error_type( odbx_t* handle ) { if( handle->aux != NULL ) { return ((struct pgconn*) handle->aux)->errtype; } return -1; } static int pgsql_odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ) { if( *tolen < fromlen * 2 + 1 ) { return -ODBX_ERR_SIZE; } #ifdef HAVE_PQ_ESCAPE_STRING_CONN int err; *tolen = PQescapeStringConn( (PGconn*) handle->generic, to, from, fromlen, &err ); if( err != 0 ) { ((struct pgconn* ) handle->aux)->errtype = 1; return -ODBX_ERR_BACKEND; } #else *tolen = PQescapeString( to, from, fromlen ); #endif return ODBX_ERR_SUCCESS; } static int pgsql_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { struct pgconn* aux = (struct pgconn*) handle->aux; if( PQsendQuery( (PGconn*) handle->generic, query ) == 0 ) { aux->errtype = 1; if( PQstatus( (PGconn*) handle->generic ) != CONNECTION_OK ) { aux->errtype = -1; } return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int pgsql_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { struct pgconn* conn = (struct pgconn* ) handle->aux; if( handle->generic == NULL || handle->aux == NULL ) { return -ODBX_ERR_PARAM; } #ifdef HAVE_SELECT if( timeout != NULL && PQisBusy( (PGconn*) handle->generic ) == 1 ) { int fd, err; fd_set fds; if( ( fd = PQsocket( (PGconn*) handle->generic ) ) == -1 ) { conn->errtype = -1; return -ODBX_ERR_BACKEND; } FD_ZERO( &fds ); FD_SET( fd, &fds ); while( ( err = select( fd + 1, &fds, NULL, NULL, timeout ) ) < 0 && errno == EINTR ); switch( err ) { case -1: return -ODBX_ERR_RESULT; case 0: return ODBX_RES_TIMEOUT; /* timeout while waiting for a result */ } } #endif PGresult* res; if( ( res = PQgetResult( (PGconn*) handle->generic ) ) == NULL ) { return ODBX_RES_DONE; /* no more results are available */ } if( ( *result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { PQclear( res ); return -ODBX_ERR_NOMEM; } if( ( (*result)->aux = malloc( sizeof( struct pgres ) ) ) == NULL ) { PQclear( res ); free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } struct pgres* aux = (struct pgres*) (*result)->aux; (*result)->generic = (void*) res; aux->total = PQntuples( res ); aux->count = -1; conn->errtype = 0; switch( PQresultStatus( res ) ) { case PGRES_COMMAND_OK: case PGRES_EMPTY_QUERY: return ODBX_RES_NOROWS; /* not SELECT like query */ case PGRES_TUPLES_OK: case PGRES_COPY_OUT: case PGRES_COPY_IN: return ODBX_RES_ROWS; /* result is available*/ case PGRES_FATAL_ERROR: PQconsumeInput( (PGconn*) handle->generic ); if( PQstatus( (PGconn*) handle->generic ) != CONNECTION_OK ) { conn->errtype = -1; break; } default: conn->errtype = 1; break; } pgsql_odbx_result_finish( *result ); *result = NULL; return -ODBX_ERR_BACKEND; } static int pgsql_odbx_result_finish( odbx_result_t* result ) { if( result->generic != NULL ) { PQclear( (PGresult*) result->generic ); result->generic = NULL; } if( result->aux != NULL ) { free( result->aux ); result->aux = NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int pgsql_odbx_row_fetch( odbx_result_t* result ) { struct pgres* aux = result->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( aux->count + 1 < aux->total ) { aux->count += 1; return ODBX_ROW_NEXT; } return ODBX_ROW_DONE; } static uint64_t pgsql_odbx_rows_affected( odbx_result_t* result ) { return strtoull( PQcmdTuples( (PGresult*) result->generic ), NULL, 10 ); } static unsigned long pgsql_odbx_column_count( odbx_result_t* result ) { return (unsigned long) PQnfields( (const PGresult*) result->generic ); } static const char* pgsql_odbx_column_name( odbx_result_t* result, unsigned long pos ) { return (const char*) PQfname( (const PGresult*) result->generic, pos ); } static int pgsql_odbx_column_type( odbx_result_t* result, unsigned long pos ) { switch( PQftype( (PGresult*) result->generic, pos ) ) { case BOOLOID: return ODBX_TYPE_BOOLEAN; case INT2OID: return ODBX_TYPE_SMALLINT; case INT4OID: return ODBX_TYPE_INTEGER; case INT8OID: return ODBX_TYPE_BIGINT; case NUMERICOID: return ODBX_TYPE_DECIMAL; case FLOAT4OID: return ODBX_TYPE_REAL; case FLOAT8OID: return ODBX_TYPE_DOUBLE; case CHAROID: case BPCHAROID: return ODBX_TYPE_CHAR; case VARCHAROID: return ODBX_TYPE_VARCHAR; case TEXTOID: return ODBX_TYPE_CLOB; case TIMEOID: return ODBX_TYPE_TIME; case TIMETZOID: return ODBX_TYPE_TIMETZ; case TIMESTAMPOID: return ODBX_TYPE_TIMESTAMP; case TIMESTAMPTZOID: return ODBX_TYPE_TIMESTAMPTZ; case DATEOID: return ODBX_TYPE_DATE; case INTERVALOID: return ODBX_TYPE_INTERVAL; case ANYARRAYOID: return ODBX_TYPE_ARRAY; default: return ODBX_TYPE_UNKNOWN; } } static unsigned long pgsql_odbx_field_length( odbx_result_t* result, unsigned long pos ) { if( result->aux != NULL ) { return (unsigned long) PQgetlength( (const PGresult*) result->generic, ((struct pgres*) result->aux)->count, pos ); } return 0; } static const char* pgsql_odbx_field_value( odbx_result_t* result, unsigned long pos ) { struct pgres* aux = (struct pgres*) result->aux; if( aux != NULL && PQgetisnull( (PGresult*) result->generic, aux->count, pos ) == 0 ) { char* value = PQgetvalue( (const PGresult*) result->generic, aux->count, pos ); if( PQftype( (PGresult*) result->generic, pos ) == BOOLOID ) { // replace boolean t/f by 1/0 switch( value[0] ) { case 'f': value[0] = '0'; break; case 't': value[0] = '1'; break; } } return (const char*) value; } return NULL; } opendbx-1.4.6/backends/pgsql/pgsqlbackend.h0000644000175000017500000000330411425153450015611 00000000000000/* * PostgreSQL driver for OpenDBX * Copyright (C) 2004-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #include #ifndef PGSQLBACKEND_H #define PGSQLBACKEND_H #define PGSQL_BUFLEN 511 /* * PostgreSQL OID values (from catalog/pg_type.h) */ #define BOOLOID 16 #define BYTEAOID 17 #define CHAROID 18 #define INT8OID 20 #define INT2OID 21 #define INT4OID 23 #define TEXTOID 25 #define FLOAT4OID 700 #define FLOAT8OID 701 #define BPCHAROID 1042 #define VARCHAROID 1043 #define DATEOID 1082 #define TIMEOID 1083 #define TIMESTAMPOID 1114 #define TIMESTAMPTZOID 1184 #define INTERVALOID 1186 #define TIMETZOID 1266 #define NUMERICOID 1700 #define ANYARRAYOID 2277 /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct pgconn { char info[PGSQL_BUFLEN+1]; int infolen; int errtype; int ssl; unsigned int timeout; }; struct pgres { int count; int total; }; #endif opendbx-1.4.6/backends/pgsql/pgsql_basic.h0000644000175000017500000000354611425153450015452 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "pgsqlbackend.h" #ifndef PGSQL_BASIC_H #define PGSQL_BASIC_H /* * Basic operations */ static int pgsql_odbx_init( odbx_t* handle, const char* host, const char* port ); static int pgsql_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int pgsql_odbx_unbind( odbx_t* handle ); static int pgsql_odbx_finish( odbx_t* handle ); static int pgsql_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int pgsql_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* pgsql_odbx_error( odbx_t* handle ); static int pgsql_odbx_error_type( odbx_t* handle ); static int pgsql_odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ); static int pgsql_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int pgsql_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int pgsql_odbx_result_finish( odbx_result_t* result ); static int pgsql_odbx_row_fetch( odbx_result_t* result ); static uint64_t pgsql_odbx_rows_affected( odbx_result_t* result ); static unsigned long pgsql_odbx_column_count( odbx_result_t* result ); static const char* pgsql_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int pgsql_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long pgsql_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* pgsql_odbx_field_value( odbx_result_t* result, unsigned long pos ); #endif opendbx-1.4.6/backends/oracle/0000755000175000017500000000000011765214162013206 500000000000000opendbx-1.4.6/backends/oracle/oraclebackend.c0000644000175000017500000000120211425153447016043 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "oraclebackend.h" /* * Declaration of Oracle capabilities */ extern struct odbx_basic_ops oracle_odbx_basic_ops; struct odbx_ops oracle_odbx_ops = { .basic = &oracle_odbx_basic_ops, #ifdef HAVE_OCILOBWRITE2 .lo = NULL, #else .lo = NULL, #endif }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &oracle_odbx_ops; } #endif opendbx-1.4.6/backends/oracle/Makefile.in0000644000175000017500000005421411765211301015171 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/oracle DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) liboraclebackend_la_DEPENDENCIES = am_liboraclebackend_la_OBJECTS = liboraclebackend_la-oraclebackend.lo \ liboraclebackend_la-oracle_basic.lo \ liboraclebackend_la-oracle_lo.lo liboraclebackend_la_OBJECTS = $(am_liboraclebackend_la_OBJECTS) liboraclebackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(liboraclebackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_liboraclebackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_liboraclebackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(liboraclebackend_la_SOURCES) DIST_SOURCES = $(liboraclebackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = liboraclebackend.la @SINGLELIB_FALSE@liboraclebackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@liboraclebackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = liboraclebackend.la @SINGLELIB_FALSE@liboraclebackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ liboraclebackend_la_SOURCES = oraclebackend.h oraclebackend.c oracle_basic.h oracle_basic.c oracle_lo.h oracle_lo.c liboraclebackend_la_LIBADD = -l@LIBORACLE@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/oracle/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/oracle/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done liboraclebackend.la: $(liboraclebackend_la_OBJECTS) $(liboraclebackend_la_DEPENDENCIES) $(liboraclebackend_la_LINK) $(am_liboraclebackend_la_rpath) $(liboraclebackend_la_OBJECTS) $(liboraclebackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liboraclebackend_la-oracle_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liboraclebackend_la-oracle_lo.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liboraclebackend_la-oraclebackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< liboraclebackend_la-oraclebackend.lo: oraclebackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liboraclebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liboraclebackend_la-oraclebackend.lo -MD -MP -MF $(DEPDIR)/liboraclebackend_la-oraclebackend.Tpo -c -o liboraclebackend_la-oraclebackend.lo `test -f 'oraclebackend.c' || echo '$(srcdir)/'`oraclebackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liboraclebackend_la-oraclebackend.Tpo $(DEPDIR)/liboraclebackend_la-oraclebackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='oraclebackend.c' object='liboraclebackend_la-oraclebackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liboraclebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liboraclebackend_la-oraclebackend.lo `test -f 'oraclebackend.c' || echo '$(srcdir)/'`oraclebackend.c liboraclebackend_la-oracle_basic.lo: oracle_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liboraclebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liboraclebackend_la-oracle_basic.lo -MD -MP -MF $(DEPDIR)/liboraclebackend_la-oracle_basic.Tpo -c -o liboraclebackend_la-oracle_basic.lo `test -f 'oracle_basic.c' || echo '$(srcdir)/'`oracle_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liboraclebackend_la-oracle_basic.Tpo $(DEPDIR)/liboraclebackend_la-oracle_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='oracle_basic.c' object='liboraclebackend_la-oracle_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liboraclebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liboraclebackend_la-oracle_basic.lo `test -f 'oracle_basic.c' || echo '$(srcdir)/'`oracle_basic.c liboraclebackend_la-oracle_lo.lo: oracle_lo.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liboraclebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT liboraclebackend_la-oracle_lo.lo -MD -MP -MF $(DEPDIR)/liboraclebackend_la-oracle_lo.Tpo -c -o liboraclebackend_la-oracle_lo.lo `test -f 'oracle_lo.c' || echo '$(srcdir)/'`oracle_lo.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/liboraclebackend_la-oracle_lo.Tpo $(DEPDIR)/liboraclebackend_la-oracle_lo.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='oracle_lo.c' object='liboraclebackend_la-oracle_lo.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liboraclebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o liboraclebackend_la-oracle_lo.lo `test -f 'oracle_lo.c' || echo '$(srcdir)/'`oracle_lo.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/oracle/oracle_lo.c0000644000175000017500000001001211425153447015224 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #ifdef HAVE_OCILOBWRITE2 #define ORAXB8_DEFINED // Oracle 10.2.0 workaround, bug 4901517 #ifndef oraub8 typedef unsigned long long oraub8; #endif #include "oracle_lo.h" #include #include /* * Declaration of Oracle capabilities */ struct odbx_lo_ops oracle_odbx_lo_ops = { .open = oracle_odbx_lo_open, .close = oracle_odbx_lo_close, .read = oracle_odbx_lo_read, .write = oracle_odbx_lo_write, }; /* * ODBX large object operations * Oracle style */ static int oracle_odbx_lo_open( odbx_result_t* result, odbx_lo_t** lo, const char* value ) { struct oralob* oralob; struct oraconn* conn = (struct oraconn*) result->handle->aux; if( ( *lo = (odbx_lo_t*) malloc( sizeof( struct odbx_lo_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } if( ( oralob = (struct oralob*) malloc( sizeof( struct oralob ) ) ) == NULL ) { free( *lo ); *lo = NULL; return -ODBX_ERR_NOMEM; } oralob->lob = (OCILobLocator*) value; oralob->rpiece = OCI_FIRST_PIECE; oralob->wpiece = OCI_FIRST_PIECE; (*lo)->result = result; (*lo)->generic = (void*) oralob; if( ( conn->errcode = OCILobOpen( conn->ctx, conn->err, (OCILobLocator*) value, OCI_LOB_READONLY ) ) != OCI_SUCCESS ) // OCI_LOB_READWRITE { free( (*lo)->generic ); (*lo)->generic = NULL; free( *lo ); *lo = NULL; return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int oracle_odbx_lo_close( odbx_lo_t* lo ) { if( lo->result == NULL || lo->result->handle == NULL || lo->result->handle->aux == NULL ) { return ODBX_ERR_HANDLE; } struct oraconn* conn = (struct oraconn*) lo->result->handle->aux; struct oralob* oralob = (struct oralob*) lo->generic; if( oralob->wpiece == OCI_NEXT_PIECE ) { oraub8 blen = 0; oraub8 clen = 0; int buffer = 0; if( ( conn->errcode = OCILobWrite2( conn->ctx, conn->err, lo->generic, &blen, &clen, 1, (dvoid*) &buffer, 0, OCI_LAST_PIECE, NULL, NULL, 0, SQLCS_IMPLICIT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } } if( ( conn->errcode = OCILobClose( conn->ctx, conn->err, lo->generic ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } free( lo->generic ); lo->generic = NULL; free( lo ); return ODBX_ERR_SUCCESS; } static ssize_t oracle_odbx_lo_read( odbx_lo_t* lo, void* buffer, size_t buflen ) { oraub8 blen = 0; oraub8 clen = 0; struct oraconn* conn = (struct oraconn*) lo->result->handle->aux; struct oralob* oralob = (struct oralob*) lo->generic; if( lo->generic == NULL ) { return -ODBX_ERR_HANDLE; } if( buflen > 0x7FFFFFFF ) { buflen = 0x7FFFFFFF; } // we can only return ssize_t conn->errcode = OCILobRead2( conn->ctx, conn->err, lo->generic, &blen, &clen, 1, buffer, (oraub8) buflen, oralob->rpiece, NULL, NULL, 0, SQLCS_IMPLICIT ); switch( conn->errcode ) { case OCI_SUCCESS: return (ssize_t) 0; case OCI_NEED_DATA: oralob->rpiece = OCI_NEXT_PIECE; return (ssize_t) blen; } return -ODBX_ERR_BACKEND; } static ssize_t oracle_odbx_lo_write( odbx_lo_t* lo, void* buffer, size_t buflen ) { oraub8 blen = 0; oraub8 clen = 0; struct oraconn* conn = (struct oraconn*) lo->result->handle->aux; struct oralob* oralob = (struct oralob*) lo->generic; if( lo->generic == NULL ) { return -ODBX_ERR_HANDLE; } if( buflen > 0x7FFFFFFF ) { buflen = 0x7FFFFFFF; } // we can only return ssize_t if( oralob->wpiece == OCI_FIRST_PIECE ) { if( ( conn->errcode = OCILobTrim2( conn->ctx, conn->err, lo->generic, 0 ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } } conn->errcode = OCILobWrite2( conn->ctx, conn->err, lo->generic, &blen, &clen, 1, buffer, (oraub8) buflen, oralob->wpiece, NULL, NULL, 0, SQLCS_IMPLICIT ); switch( conn->errcode ) { case OCI_SUCCESS: case OCI_NEED_DATA: oralob->wpiece = OCI_NEXT_PIECE; return (ssize_t) blen; } return -ODBX_ERR_BACKEND; } #endif opendbx-1.4.6/backends/oracle/Makefile.am0000644000175000017500000000101211425153447015155 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = liboraclebackend.la liboraclebackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = liboraclebackend.la liboraclebackend_la_CPPFLAGS = liboraclebackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif liboraclebackend_la_SOURCES = oraclebackend.h oraclebackend.c oracle_basic.h oracle_basic.c oracle_lo.h oracle_lo.c liboraclebackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) liboraclebackend_la_LIBADD = -l@LIBORACLE@ opendbx-1.4.6/backends/oracle/oracle_basic.h0000644000175000017500000000374111425153447015713 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "oraclebackend.h" #ifndef ORACLE_BASIC_H #define ORACLE_BASIC_H /* * Basic operations */ static int oracle_odbx_init( odbx_t* handle, const char* host, const char* port ); static int oracle_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int oracle_odbx_unbind( odbx_t* handle ); static int oracle_odbx_finish( odbx_t* handle ); static int oracle_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int oracle_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* oracle_odbx_error( odbx_t* handle ); static int oracle_odbx_error_type( odbx_t* handle ); static int oracle_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int oracle_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int oracle_odbx_result_finish( odbx_result_t* result ); static int oracle_odbx_row_fetch( odbx_result_t* result ); static uint64_t oracle_odbx_rows_affected( odbx_result_t* result ); static unsigned long oracle_odbx_column_count( odbx_result_t* result ); static const char* oracle_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int oracle_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long oracle_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* oracle_odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * Private support functions */ static int oracle_priv_handle_cleanup( odbx_t* handle ); static int oracle_priv_stmt_exec( struct oraconn* conn, text* stmt ); static int oracle_priv_collen( ub2 type, ub2 length ); #endif opendbx-1.4.6/backends/oracle/oracle_basic.c0000644000175000017500000005061311425153447015706 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ // required for setenv() #define _POSIX_C_SOURCE 200112L #include "oracle_basic.h" #include #include #include #include #include #ifdef HAVE_WINDOWS_H #include #endif /* * Declaration of Oracle OCI8 capabilities */ struct odbx_basic_ops oracle_odbx_basic_ops = { .init = oracle_odbx_init, .bind = oracle_odbx_bind, .unbind = oracle_odbx_unbind, .finish = oracle_odbx_finish, .get_option = oracle_odbx_get_option, .set_option = oracle_odbx_set_option, .error = oracle_odbx_error, .error_type = oracle_odbx_error_type, .escape = NULL, .query = oracle_odbx_query, .result = oracle_odbx_result, .result_finish = oracle_odbx_result_finish, .rows_affected = oracle_odbx_rows_affected, .row_fetch = oracle_odbx_row_fetch, .column_count = oracle_odbx_column_count, .column_name = oracle_odbx_column_name, .column_type = oracle_odbx_column_type, .field_length = oracle_odbx_field_length, .field_value = oracle_odbx_field_value, }; static const char* oracle_odbx_errmsg[] = { gettext_noop("Invalid handle"), }; /* * ODBX basic operations * Oracle OCI8 style */ static int oracle_odbx_init( odbx_t* handle, const char* host, const char* port ) { if( host == NULL ) { return -ODBX_ERR_PARAM; } if( ( handle->aux = malloc( sizeof( struct oraconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } dvoid* hdl; OCIEnv* env; struct oraconn* conn = (struct oraconn*) handle->aux; handle->generic = NULL; conn->err = NULL; conn->srv = NULL; conn->ctx = NULL; conn->sess = NULL; conn->mode = OCI_COMMIT_ON_SUCCESS; #if defined( HAVE_SETENV ) setenv( "NLS_LANG", ".AL32UTF8", 0 ); #elif defined( HAVE_SETENVIRONMENTVARIABLE ) SetEnvironmentVariable( "NLS_LANG", ".AL32UTF8" ); #endif if( ( conn->errcode = OCIEnvCreate( &env, OCI_THREADED, NULL, NULL, NULL, NULL, 0, NULL ) ) != OCI_SUCCESS ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } handle->generic = (void*) env; if( ( conn->errcode = OCIHandleAlloc( env, &hdl, OCI_HTYPE_ERROR, 0, NULL ) ) != OCI_SUCCESS ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } conn->err = hdl; if( ( conn->errcode = OCIHandleAlloc( env, &hdl, OCI_HTYPE_SERVER, 0, NULL ) ) != OCI_SUCCESS ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } conn->srv = hdl; if( ( conn->errcode = OCIHandleAlloc( env, &hdl, OCI_HTYPE_SVCCTX, 0, NULL ) ) != OCI_SUCCESS ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } conn->ctx = hdl; if( ( conn->errcode = OCIHandleAlloc( env, &hdl, OCI_HTYPE_SESSION, 0, NULL ) ) != OCI_SUCCESS ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } conn->sess = hdl; if( ( conn->errcode = OCIHandleAlloc( env, &hdl, OCI_HTYPE_STMT, 0, NULL ) ) != OCI_SUCCESS ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } conn->stmt = hdl; int len = strlen( host ) + 8; conn->port[0] = 0; if( ( conn->host = malloc( len ) ) == NULL ) { oracle_priv_handle_cleanup( handle ); return -ODBX_ERR_NOMEM; } snprintf( conn->host, len, "(HOST=%s)", host ); if( port != NULL ) { snprintf( conn->port, ORACLE_PORTLEN, "(PORT=%s)", port ); } return ODBX_ERR_SUCCESS; } static int oracle_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { struct oraconn* conn = (struct oraconn*) handle->aux; if( handle->generic == NULL || conn == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } char connstr[] = "(" "DESCRIPTION=(" "ADDRESS_LIST=(" "ADDRESS=(PROTOCOL=TCP)%s%s" ")" ")" "(ENABLE=BROKEN)" "(CONNECT_DATA=(SERVICE_NAME=%s))" ")"; int len; char server[384]; if( ( len = snprintf( server, 384, connstr, conn->host, conn->port, database ) ) > 384 ) { return -ODBX_ERR_SIZE; } if( ( conn->errcode = OCIServerAttach( conn->srv, conn->err, (text*) server, len, OCI_DEFAULT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIAttrSet( conn->ctx, OCI_HTYPE_SVCCTX, conn->srv, 0, OCI_ATTR_SERVER, conn->err ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIAttrSet( conn->sess, OCI_HTYPE_SESSION, (dvoid*) who, strlen( who ), OCI_ATTR_USERNAME, conn->err ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIAttrSet( conn->sess, OCI_HTYPE_SESSION, (dvoid*) cred, strlen( cred ), OCI_ATTR_PASSWORD, conn->err ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCISessionBegin( conn->ctx, conn->err, conn->sess, OCI_CRED_RDBMS, OCI_DEFAULT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIAttrSet( conn->ctx, OCI_HTYPE_SVCCTX, conn->sess, 0, OCI_ATTR_SESSION, conn->err ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } text tsfmt[] = "ALTER SESSION SET NLS_TIMESTAMP_FORMAT = 'YYYY-MM-DD HH24:MI:SS'"; if( oracle_priv_stmt_exec( conn, tsfmt ) != ODBX_ERR_SUCCESS ) { text datefmt[] = "ALTER SESSION SET NLS_DATE_FORMAT = 'YYYY-MM-DD HH24:MI:SS'"; return oracle_priv_stmt_exec( conn, datefmt ); } else { text datefmt[] = "ALTER SESSION SET NLS_DATE_FORMAT = 'YYYY-MM-DD'"; return oracle_priv_stmt_exec( conn, datefmt ); } return ODBX_ERR_SUCCESS; } static int oracle_odbx_unbind( odbx_t* handle ) { struct oraconn* conn = (struct oraconn*) handle->aux; if( handle->generic == NULL || conn == NULL ) { return -ODBX_ERR_PARAM; } if( ( conn->errcode = OCISessionEnd( conn->ctx, conn->err, conn->sess, OCI_DEFAULT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIServerDetach( conn->srv, conn->err, OCI_DEFAULT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int oracle_odbx_finish( odbx_t* handle ) { struct oraconn* conn = (struct oraconn*) handle->aux; if( handle->generic == NULL || conn == NULL ) { return -ODBX_ERR_PARAM; } return oracle_priv_handle_cleanup( handle ); } static int oracle_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_THREAD_SAFE: case ODBX_OPT_PAGED_RESULTS: *((int*) value) = ODBX_ENABLE; break; case ODBX_OPT_TLS: // FIXME: Howto find out if compiled with SSL support case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: *((int*) value) = ODBX_DISABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int oracle_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { if( handle->generic == NULL || handle->aux == NULL ) { return -ODBX_ERR_PARAM; } switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: return -ODBX_ERR_OPTWR; case ODBX_OPT_PAGED_RESULTS: return ODBX_ERR_SUCCESS; default: return -ODBX_ERR_OPTION; } } static const char* oracle_odbx_error( odbx_t* handle ) { sb4 error; struct oraconn* conn = (struct oraconn*) handle->aux; if( conn == NULL ) { return dgettext( "opendbx", oracle_odbx_errmsg[0] ); } switch( conn->errcode ) { case OCI_SUCCESS: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Success" ); break; case OCI_SUCCESS_WITH_INFO: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Success with info" ); break; case OCI_NEED_DATA: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Need data" ); break; case OCI_NO_DATA: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "No data" ); break; case OCI_ERROR: OCIErrorGet( (dvoid*) conn->err, 1, NULL, &error, (text*) conn->errmsg, OCI_ERROR_MAXMSG_SIZE, OCI_HTYPE_ERROR ); break; case OCI_INVALID_HANDLE: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Invalid handle" ); break; case OCI_STILL_EXECUTING: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Still executing" ); break; case OCI_CONTINUE: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Continue" ); break; default: snprintf( conn->errmsg, OCI_ERROR_MAXMSG_SIZE, "Unknown error" ); break; } return conn->errmsg; } /* * TODO: Distinguish fatal/non-fatal errors in case of OCI_ERROR */ static int oracle_odbx_error_type( odbx_t* handle ) { struct oraconn* conn = (struct oraconn*) handle->aux; if( conn == NULL ) { return -1; } switch( conn->errcode ) { case OCI_SUCCESS: return 0; case OCI_INVALID_HANDLE: return -1; default: return 1; } } static int oracle_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { struct oraconn* conn = (struct oraconn*) handle->aux; if( conn == NULL ) { return -ODBX_ERR_PARAM; } if( ( conn->errcode = OCIStmtPrepare( conn->stmt, conn->err, (text*) query, (ub4) length, OCI_NTV_SYNTAX, OCI_DEFAULT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } conn->numstmt = 1; if( !strncasecmp( "SET TRANSACTION", query, 15 ) ) { conn->mode = OCI_DEFAULT; } else if( !strncasecmp( "COMMIT", query, 6 ) ) { conn->mode = OCI_COMMIT_ON_SUCCESS; } else if( !strncasecmp( "ROLLBACK", query, 8 ) ) { conn->mode = OCI_COMMIT_ON_SUCCESS; } return ODBX_ERR_SUCCESS; } static int oracle_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { struct oraconn* conn = (struct oraconn*) handle->aux; if( conn == NULL ) { return -ODBX_ERR_PARAM; } if( conn->numstmt == 0 ) { return ODBX_RES_DONE; // no more results } conn->numstmt--; if( ( *result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*result)->generic = NULL; (*result)->aux = NULL; ub2 type; if( ( conn->errcode = OCIAttrGet( (dvoid*) conn->stmt, OCI_HTYPE_STMT, (dvoid*) &type, 0, OCI_ATTR_STMT_TYPE, conn->err ) ) != OCI_SUCCESS ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } if( type != OCI_STMT_SELECT ) { if( ( conn->errcode = OCIStmtExecute( conn->ctx, conn->stmt, conn->err, 1, 0, NULL, NULL, conn->mode ) ) != OCI_SUCCESS ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } return ODBX_RES_NOROWS; // Not SELECT like query } switch( ( conn->errcode = OCIStmtExecute( conn->ctx, conn->stmt, conn->err, 0, 0, NULL, NULL, conn->mode ) ) ) { case OCI_SUCCESS: case OCI_NO_DATA: break; default: oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } if( ( (*result)->aux = malloc( sizeof( struct oraraux ) ) ) == NULL ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } ub4 cols; if( ( conn->errcode = OCIAttrGet( conn->stmt, OCI_HTYPE_STMT, &cols, 0, OCI_ATTR_PARAM_COUNT, conn->err ) ) != OCI_SUCCESS ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } if( ( (*result)->generic = malloc( cols * sizeof( struct orargen ) ) ) == NULL ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } struct orargen* rgen = (struct orargen*) (*result)->generic; struct oraraux* raux = (struct oraraux*) (*result)->aux; OCIDefine* def; dvoid* param; dvoid* data; sb2 len; ub4 i; raux->cols = 0; for( i = 0; i < cols; i++ ) { param = rgen[i].param; if( ( conn->errcode = OCIParamGet( conn->stmt, OCI_HTYPE_STMT, conn->err, ¶m, i + 1 ) ) != OCI_SUCCESS ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } rgen[i].param = param; if( ( conn->errcode = OCIAttrGet( (dvoid*) rgen[i].param, OCI_DTYPE_PARAM, (dvoid*) &(rgen[i].type), NULL, OCI_ATTR_DATA_TYPE, conn->err ) ) != OCI_SUCCESS ) { free( rgen[i].param ); oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIAttrGet( (dvoid*) rgen[i].param, OCI_DTYPE_PARAM, (dvoid*) &len, NULL, OCI_ATTR_DATA_SIZE, conn->err ) ) != OCI_SUCCESS ) { free( rgen[i].param ); oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } len = oracle_priv_collen( rgen[i].type, len ); if( ( data = (dvoid*) malloc( len ) ) == NULL ) { free( rgen[i].param ); oracle_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } def = NULL; type = SQLT_STR; /* switch( rgen[i].type ) { case SQLT_CLOB: case SQLT_BLOB: type = rgen[i].type; if( OCIDescriptorAlloc( (dvoid*) handle->generic, &data, OCI_DTYPE_LOB, 0, NULL ) != OCI_SUCCESS ) { free( data ); free( rgen[i].param ); oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } } */ if( ( conn->errcode = OCIDefineByPos( conn->stmt, &def, conn->err, i + 1, data, len, type, (dvoid*) &(rgen[i].ind), &(rgen[i].length), NULL, OCI_DEFAULT ) ) != OCI_SUCCESS ) { free( data ); free( rgen[i].param ); oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } rgen[i].data = data; raux->cols++; } if( ( conn->errcode = OCIAttrSet( (dvoid*) conn->stmt, OCI_HTYPE_STMT, (dvoid*) &chunk, sizeof( unsigned long ), OCI_ATTR_PREFETCH_ROWS, conn->err ) ) != OCI_SUCCESS ) { oracle_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } return ODBX_RES_ROWS; // result is available } static int oracle_odbx_result_finish( odbx_result_t* result ) { struct orargen* rgen = (struct orargen*) result->generic; struct oraraux* raux = (struct oraraux*) result->aux; if( rgen != NULL && raux != NULL ) { ub4 i; for( i = 0; i < raux->cols; i++ ) { /* switch( rgen[i].type ) { case SQLT_CLOB: case SQLT_BLOB: OCIDescriptorFree( rgen[i].data, OCI_DTYPE_LOB ); } */ free( rgen[i].data ); } free( result->generic ); result->generic = NULL; } if( raux != NULL ) { free( result->aux ); result->aux = NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int oracle_odbx_row_fetch( odbx_result_t* result ) { if( result->handle == NULL || result->handle->aux == NULL ) { return -ODBX_ERR_PARAM; } sb4 error; struct oraconn* conn = (struct oraconn*) result->handle->aux; switch( ( conn->errcode = OCIStmtFetch( conn->stmt, conn->err, 1, OCI_FETCH_NEXT, OCI_DEFAULT ) ) ) { case OCI_SUCCESS: return ODBX_ROW_NEXT; case OCI_NO_DATA: return ODBX_ROW_DONE; default: OCIErrorGet( (dvoid*) conn->err, 1, NULL, &error, (text*) conn->errmsg, OCI_ERROR_MAXMSG_SIZE, OCI_HTYPE_ERROR ); if( error == 1002 ) { return ODBX_ROW_DONE; } // don't return an error if called again after OCI_NO_DATA was returned return -ODBX_ERR_BACKEND; } } static uint64_t oracle_odbx_rows_affected( odbx_result_t* result ) { if( result->handle != NULL && result->handle->aux != NULL ) { ub4 rows = 0; struct oraconn* conn = (struct oraconn*) result->handle->aux; if( ( conn->errcode = OCIAttrGet( conn->stmt, OCI_HTYPE_STMT, &rows, NULL, OCI_ATTR_ROW_COUNT, conn->err ) ) == OCI_SUCCESS ) { return (uint64_t) rows; } } return 0; } static unsigned long oracle_odbx_column_count( odbx_result_t* result ) { struct oraraux* raux = (struct oraraux*) result->aux; if( raux != NULL ) { return (unsigned long) raux->cols; } return 0; } static const char* oracle_odbx_column_name( odbx_result_t* result, unsigned long pos ) { struct orargen* rgen = (struct orargen*) result->generic; struct oraraux* raux = (struct oraraux*) result->aux; if( rgen != NULL && raux != NULL && result->handle != NULL && result->handle->aux != NULL && pos < raux->cols ) { ub4 len; char* name; struct oraconn* conn = (struct oraconn*) result->handle->aux; if( ( conn->errcode = OCIAttrGet( rgen[pos].param, OCI_DTYPE_PARAM, &name, &len, OCI_ATTR_NAME, conn->err ) ) == OCI_SUCCESS ) { if( len >= ORACLE_COLNAMELEN ) { len = ORACLE_COLNAMELEN -1; } memcpy( conn->colname, name, len ); conn->colname[len] = 0; return (const char*) conn->colname; } } return NULL; } static int oracle_odbx_column_type( odbx_result_t* result, unsigned long pos ) { struct orargen* rgen = (struct orargen*) result->generic; struct oraraux* raux = (struct oraraux*) result->aux; if( rgen != NULL && raux != NULL && pos < raux->cols ) { switch( rgen[pos].type ) { case SQLT_INT: return ODBX_TYPE_INTEGER; case SQLT_NUM: return ODBX_TYPE_DECIMAL; case SQLT_BFLOAT: case SQLT_IBFLOAT: return ODBX_TYPE_REAL; case SQLT_FLT: case SQLT_BDOUBLE: case SQLT_IBDOUBLE: return ODBX_TYPE_DOUBLE; case SQLT_AFC: return ODBX_TYPE_CHAR; case SQLT_AVC: case SQLT_CHR: case SQLT_VCS: case SQLT_STR: case SQLT_LNG: case SQLT_LVC: return ODBX_TYPE_VARCHAR; case SQLT_CLOB: return ODBX_TYPE_CLOB; case SQLT_BLOB: return ODBX_TYPE_BLOB; case SQLT_TIME: return ODBX_TYPE_TIME; case SQLT_TIME_TZ: return ODBX_TYPE_TIMETZ; case SQLT_TIMESTAMP: return ODBX_TYPE_TIMESTAMP; case SQLT_TIMESTAMP_TZ: return ODBX_TYPE_TIMESTAMPTZ; case SQLT_DAT: case SQLT_DATE: return ODBX_TYPE_DATE; case SQLT_INTERVAL_YM: case SQLT_INTERVAL_DS: return ODBX_TYPE_INTERVAL; } return ODBX_UNKNOWN; } return -ODBX_ERR_PARAM; } static unsigned long oracle_odbx_field_length( odbx_result_t* result, unsigned long pos ) { struct orargen* rgen = (struct orargen*) result->generic; struct oraraux* raux = (struct oraraux*) result->aux; if( rgen != NULL && raux != NULL && pos < raux->cols ) { return rgen[pos].length; } return 0; } static const char* oracle_odbx_field_value( odbx_result_t* result, unsigned long pos ) { struct orargen* rgen = (struct orargen*) result->generic; struct oraraux* raux = (struct oraraux*) result->aux; if( rgen != NULL && raux != NULL && pos < raux->cols && rgen[pos].ind != -1 ) { return (const char*) rgen[pos].data; } return NULL; } /* * Private support functions */ static int oracle_priv_handle_cleanup( odbx_t* handle ) { int err = ODBX_ERR_SUCCESS; struct oraconn* aux = (struct oraconn*) handle->aux; if( aux->stmt != NULL ) { if( OCIHandleFree( aux->stmt, OCI_HTYPE_STMT ) != OCI_SUCCESS ) { err = -ODBX_ERR_PARAM; } aux->stmt = NULL; } if( aux->sess != NULL ) { if( OCIHandleFree( aux->sess, OCI_HTYPE_SESSION ) != OCI_SUCCESS ) { err = -ODBX_ERR_PARAM; } aux->sess = NULL; } if( aux->ctx != NULL ) { if( OCIHandleFree( aux->ctx, OCI_HTYPE_SVCCTX ) != OCI_SUCCESS ) { err = -ODBX_ERR_PARAM; } aux->ctx = NULL; } if( aux->srv != NULL ) { if( OCIHandleFree( aux->srv, OCI_HTYPE_SERVER ) != OCI_SUCCESS ) { err = -ODBX_ERR_PARAM; } aux->srv = NULL; } if( aux->err != NULL ) { if( OCIHandleFree( aux->err, OCI_HTYPE_ERROR ) != OCI_SUCCESS ) { err = -ODBX_ERR_PARAM; } aux->err = NULL; } if( aux->host != NULL ) { free( aux->host ); aux->host = NULL; } if( aux != NULL ) { free( handle->aux ); handle->aux = NULL; } if( handle->generic != NULL ) { if( OCIHandleFree( (OCIEnv*) handle->generic, OCI_HTYPE_ENV ) != OCI_SUCCESS ) { err = -ODBX_ERR_PARAM; } handle->generic = NULL; } return err; } static int oracle_priv_stmt_exec( struct oraconn* conn, text* stmt ) { if( ( conn->errcode = OCIStmtPrepare( conn->stmt, conn->err, stmt, (ub4) strlen( (char*) stmt ), OCI_NTV_SYNTAX, OCI_DEFAULT ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } if( ( conn->errcode = OCIStmtExecute( conn->ctx, conn->stmt, conn->err, 1, 0, NULL, NULL, OCI_COMMIT_ON_SUCCESS ) ) != OCI_SUCCESS ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int oracle_priv_collen( ub2 type, ub2 length ) { switch( type ) { case SQLT_INT: return 12; case SQLT_NUM: return 54; case SQLT_BFLOAT: case SQLT_IBFLOAT: return 42; case SQLT_FLT: case SQLT_BDOUBLE: case SQLT_IBDOUBLE: return 312; case SQLT_AFC: case SQLT_AVC: case SQLT_CHR: case SQLT_VCS: case SQLT_STR: case SQLT_LNG: case SQLT_LVC: return length * 2 + 1; // TODO: Oracle needs more than length but how much? case SQLT_CLOB: case SQLT_BLOB: // return sizeof( OCILobLocator* ); return length * 2 + 1; // TODO: Oracle needs more than length but how much? case SQLT_TIME: return 9; case SQLT_TIME_TZ: return 16; case SQLT_TIMESTAMP: return 20; case SQLT_TIMESTAMP_TZ: return 27; case SQLT_DAT: case SQLT_DATE: return 11; case SQLT_INTERVAL_YM: case SQLT_INTERVAL_DS: return 24; } return length + 1; } opendbx-1.4.6/backends/oracle/oracle_lo.h0000644000175000017500000000146111425153447015241 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "oraclebackend.h" #ifndef ORACLE_LO_H #define ORACLE_LO_H #ifdef HAVE_OCILOBWRITE2 struct oralob { OCILobLocator* lob; ub1 rpiece; ub1 wpiece; }; /* * Large object operations */ static int oracle_odbx_lo_open( odbx_result_t* result, odbx_lo_t** lo, const char* value ); static int oracle_odbx_lo_close( odbx_lo_t* lo ); static ssize_t oracle_odbx_lo_read( odbx_lo_t* lo, void* buffer, size_t buflen ); static ssize_t oracle_odbx_lo_write( odbx_lo_t* lo, void* buffer, size_t buflen ); #endif // HAVE_OCILOBWRITE2 #endif opendbx-1.4.6/backends/oracle/oraclebackend.h0000644000175000017500000000271211425153447016057 00000000000000/* * Oracle OCI8 driver for OpenDBX * Copyright (C) 2006-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #include #ifndef ORACLEBACKEND_H #define ORACLEBACKEND_H #define ORACLE_PORTLEN 16 #define ORACLE_COLNAMELEN 32 /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct oraconn { OCIError* err; OCIServer* srv; OCISvcCtx* ctx; OCISession* sess; OCIStmt* stmt; int numstmt; int mode; char* host; char port[ORACLE_PORTLEN]; char colname[ORACLE_COLNAMELEN]; char errmsg[OCI_ERROR_MAXMSG_SIZE]; sword errcode; }; struct orargen { OCIParam* param; ub1* data; ub2 length; ub2 type; sb2 ind; }; struct oraraux { ub4 cols; }; #endif opendbx-1.4.6/backends/sqlite3/0000755000175000017500000000000011765214161013324 500000000000000opendbx-1.4.6/backends/sqlite3/sqlite3backend.c0000644000175000017500000000112511425153447016305 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2005-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sqlite3backend.h" /* * Declaration of SQLite3 capabilities */ extern struct odbx_basic_ops sqlite3_odbx_basic_ops; struct odbx_ops sqlite3_odbx_ops = { .basic = &sqlite3_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &sqlite3_odbx_ops; } #endif opendbx-1.4.6/backends/sqlite3/sqlite3_basic.h0000644000175000017500000000342611425153447016151 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2005-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sqlite3backend.h" #ifndef SQLITE3_BASIC_H #define SQLITE3_BASIC_H /* * Basic operations */ static int sqlite3_odbx_init( odbx_t* handle, const char* host, const char* port ); static int sqlite3_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int sqlite3_odbx_unbind( odbx_t* handle ); static int sqlite3_odbx_finish( odbx_t* handle ); static int sqlite3_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int sqlite3_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* sqlite3_odbx_error( odbx_t* handle ); static int sqlite3_odbx_error_type( odbx_t* handle ); static int sqlite3_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int sqlite3_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int sqlite3_odbx_result_finish( odbx_result_t* result ); static int sqlite3_odbx_row_fetch( odbx_result_t* result ); static uint64_t sqlite3_odbx_rows_affected( odbx_result_t* result ); static unsigned long sqlite3_odbx_column_count( odbx_result_t* result ); static const char* sqlite3_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int sqlite3_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long sqlite3_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* sqlite3_odbx_field_value( odbx_result_t* result, unsigned long pos ); #endif opendbx-1.4.6/backends/sqlite3/Makefile.in0000644000175000017500000005203011765211301015302 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/sqlite3 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libsqlite3backend_la_DEPENDENCIES = am_libsqlite3backend_la_OBJECTS = \ libsqlite3backend_la-sqlite3backend.lo \ libsqlite3backend_la-sqlite3_basic.lo libsqlite3backend_la_OBJECTS = $(am_libsqlite3backend_la_OBJECTS) libsqlite3backend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libsqlite3backend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libsqlite3backend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libsqlite3backend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libsqlite3backend_la_SOURCES) DIST_SOURCES = $(libsqlite3backend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libsqlite3backend.la @SINGLELIB_FALSE@libsqlite3backend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libsqlite3backend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libsqlite3backend.la @SINGLELIB_FALSE@libsqlite3backend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libsqlite3backend_la_SOURCES = sqlite3backend.h sqlite3backend.c sqlite3_basic.h sqlite3_basic.c libsqlite3backend_la_LIBADD = -l@LIBSQLITE3@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/sqlite3/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/sqlite3/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libsqlite3backend.la: $(libsqlite3backend_la_OBJECTS) $(libsqlite3backend_la_DEPENDENCIES) $(libsqlite3backend_la_LINK) $(am_libsqlite3backend_la_rpath) $(libsqlite3backend_la_OBJECTS) $(libsqlite3backend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsqlite3backend_la-sqlite3_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsqlite3backend_la-sqlite3backend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libsqlite3backend_la-sqlite3backend.lo: sqlite3backend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlite3backend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsqlite3backend_la-sqlite3backend.lo -MD -MP -MF $(DEPDIR)/libsqlite3backend_la-sqlite3backend.Tpo -c -o libsqlite3backend_la-sqlite3backend.lo `test -f 'sqlite3backend.c' || echo '$(srcdir)/'`sqlite3backend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libsqlite3backend_la-sqlite3backend.Tpo $(DEPDIR)/libsqlite3backend_la-sqlite3backend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sqlite3backend.c' object='libsqlite3backend_la-sqlite3backend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlite3backend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsqlite3backend_la-sqlite3backend.lo `test -f 'sqlite3backend.c' || echo '$(srcdir)/'`sqlite3backend.c libsqlite3backend_la-sqlite3_basic.lo: sqlite3_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlite3backend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsqlite3backend_la-sqlite3_basic.lo -MD -MP -MF $(DEPDIR)/libsqlite3backend_la-sqlite3_basic.Tpo -c -o libsqlite3backend_la-sqlite3_basic.lo `test -f 'sqlite3_basic.c' || echo '$(srcdir)/'`sqlite3_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libsqlite3backend_la-sqlite3_basic.Tpo $(DEPDIR)/libsqlite3backend_la-sqlite3_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sqlite3_basic.c' object='libsqlite3backend_la-sqlite3_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsqlite3backend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsqlite3backend_la-sqlite3_basic.lo `test -f 'sqlite3_basic.c' || echo '$(srcdir)/'`sqlite3_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/sqlite3/sqlite3backend.h0000644000175000017500000000230011425153447016306 00000000000000/* * SQLite3 driver for OpenDBX * Copyright (C) 2005-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #include #ifndef SQLITE3BACKEND_H #define SQLITE3BACKEND_H /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct sconn { sqlite3_stmt* res; // Necessary to restart after timeout char* path; int pathlen; char* stmt; char* tail; unsigned long length; int err; }; #endif opendbx-1.4.6/backends/sqlite3/Makefile.am0000644000175000017500000000077711425153447015315 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libsqlite3backend.la libsqlite3backend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libsqlite3backend.la libsqlite3backend_la_CPPFLAGS = libsqlite3backend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libsqlite3backend_la_SOURCES = sqlite3backend.h sqlite3backend.c sqlite3_basic.h sqlite3_basic.c libsqlite3backend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libsqlite3backend_la_LIBADD = -l@LIBSQLITE3@ opendbx-1.4.6/backends/sqlite3/sqlite3_basic.c0000644000175000017500000002703411751464142016144 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2005-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sqlite3_basic.h" #include #include #include /* * Declaration of SQLite capabilities */ struct odbx_basic_ops sqlite3_odbx_basic_ops = { .init = sqlite3_odbx_init, .bind = sqlite3_odbx_bind, .unbind = sqlite3_odbx_unbind, .finish = sqlite3_odbx_finish, .get_option = sqlite3_odbx_get_option, .set_option = sqlite3_odbx_set_option, .error = sqlite3_odbx_error, .error_type = sqlite3_odbx_error_type, .escape = NULL, .query = sqlite3_odbx_query, .result = sqlite3_odbx_result, .result_finish = sqlite3_odbx_result_finish, .rows_affected = sqlite3_odbx_rows_affected, .row_fetch = sqlite3_odbx_row_fetch, .column_count = sqlite3_odbx_column_count, .column_name = sqlite3_odbx_column_name, .column_type = sqlite3_odbx_column_type, .field_length = sqlite3_odbx_field_length, .field_value = sqlite3_odbx_field_value, }; /* * Private sqlite3 error messages */ static const char* sqlite3_odbx_errmsg[] = { gettext_noop("Unknown error"), gettext_noop("Invalid parameter"), gettext_noop("Opening database failed"), }; /* * ODBX basic operations * SQLite3 style */ /* * SQLite3 doesn't connect to a database server. Instead it opens the database * (a file on the harddisk) directly. Thus, host doesn't contain the name of a * computer but of a directory in the filesystem instead. Port is unused. */ static int sqlite3_odbx_init( odbx_t* handle, const char* host, const char* port ) { if( ( handle->aux = malloc( sizeof( struct sconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } struct sconn* aux = handle->aux; aux->res = NULL; aux->path = NULL; aux->pathlen = 0; aux->stmt = NULL; aux->tail = NULL; aux->length = 0; aux->err = SQLITE_OK; handle->generic = NULL; if( host != NULL ) { aux->pathlen = strlen( host ); /* host == directory */ if( ( aux->path = malloc( aux->pathlen + 1 ) ) == NULL ) { free( handle->aux ); handle->aux = NULL; return -ODBX_ERR_NOMEM; } snprintf( aux->path, aux->pathlen + 1, "%s", host ); } return ODBX_ERR_SUCCESS; } /* * username and password are not used by SQLite. It relies on the filesystem * access control mechanisms for allowing or preventing database access. */ static int sqlite3_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { struct sconn* aux = (struct sconn*) handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } if( database != NULL ) { size_t flen = strlen( database ); if( ( aux->path = realloc( aux->path, aux->pathlen + flen + 1 ) ) == NULL ) { return -ODBX_ERR_NOMEM; } snprintf( aux->path + aux->pathlen, flen + 1, "%s", database ); } sqlite3* s3conn; if( ( aux->err = sqlite3_open( aux->path, &s3conn ) ) != SQLITE_OK ) { return -ODBX_ERR_BACKEND; } handle->generic = (void*) s3conn; return ODBX_ERR_SUCCESS; } static int sqlite3_odbx_unbind( odbx_t* handle ) { struct sconn* aux = (struct sconn*) handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( aux->res != NULL ) { sqlite3_finalize( aux->res ); aux->res = NULL; } if( aux->stmt != NULL ) { aux->length = 0; free( aux->stmt ); aux->stmt = NULL; } if( ( aux->err = sqlite3_close( (sqlite3*) handle->generic ) ) != SQLITE_OK ) { return -ODBX_ERR_BACKEND; } handle->generic = NULL; return ODBX_ERR_SUCCESS; } static int sqlite3_odbx_finish( odbx_t* handle ) { if( handle->aux != NULL ) { free( ((struct sconn*) handle->aux)->path ); free( handle->aux ); handle->aux = NULL; return ODBX_ERR_SUCCESS; } return -ODBX_ERR_PARAM; } static int sqlite3_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_MULTI_STATEMENTS: *(int*) value = ODBX_ENABLE; break; case ODBX_OPT_THREAD_SAFE: if( sqlite3_threadsafe() != 0 ) { *(int*) value = ODBX_ENABLE; } else { *(int*) value = ODBX_DISABLE; } break; case ODBX_OPT_TLS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_CONNECT_TIMEOUT: *(int*) value = ODBX_DISABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int sqlite3_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_MULTI_STATEMENTS: if( *((int*) value) == ODBX_ENABLE ) { return ODBX_ERR_SUCCESS; } break; case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: case ODBX_OPT_TLS: break; default: return -ODBX_ERR_OPTION; } return -ODBX_ERR_OPTWR; } static const char* sqlite3_odbx_error( odbx_t* handle ) { if( handle->generic != NULL ) { return sqlite3_errmsg( (sqlite3*) handle->generic ); } if( handle->aux == NULL ) { return dgettext( "opendbx", sqlite3_odbx_errmsg[1] ); } switch( ((struct sconn*) handle->aux)->err ) { case SQLITE_CANTOPEN: return dgettext( "opendbx", sqlite3_odbx_errmsg[2] ); } return dgettext( "opendbx", sqlite3_odbx_errmsg[0] ); } static int sqlite3_odbx_error_type( odbx_t* handle ) { int err; if( handle->generic != NULL ) { err = sqlite3_errcode( (sqlite3*) handle->generic ); } else { if( handle->aux == NULL ) { return -1; } err = ((struct sconn*) handle->aux)->err; } switch( err ) { case SQLITE_OK: return 0; case SQLITE_PERM: case SQLITE_NOMEM: case SQLITE_READONLY: case SQLITE_IOERR: case SQLITE_CORRUPT: case SQLITE_FULL: case SQLITE_CANTOPEN: case SQLITE_NOLFS: case SQLITE_AUTH: case SQLITE_NOTADB: return -1; } return 1; } static int sqlite3_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { struct sconn* aux = (struct sconn*) handle->aux; if( query == NULL || aux == NULL ) { return -ODBX_ERR_PARAM; } if( ( aux->stmt = malloc( length + 1 ) ) == NULL ) { return -ODBX_ERR_NOMEM; } memcpy( aux->stmt, query, length ); aux->stmt[length] = 0; aux->length = length; aux->tail = aux->stmt; return ODBX_ERR_SUCCESS; } static int sqlite3_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { struct sconn* aux = (struct sconn*) handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( aux->length == 0 ) { return ODBX_RES_DONE; } /* no more results */ if( timeout != NULL ) { sqlite3_busy_timeout( handle->generic, timeout->tv_sec * 1000 + timeout->tv_usec / 1000 ); } if( aux->res == NULL ) { #ifdef HAVE_SQLITE3_PREPARE_V2 if( ( aux->err = sqlite3_prepare_v2( (sqlite3*) handle->generic, aux->tail, aux->length, &aux->res, (const char**) &(aux->tail) ) ) != SQLITE_OK ) #else if( ( aux->err = sqlite3_prepare( (sqlite3*) handle->generic, aux->tail, aux->length, &aux->res, (const char**) &(aux->tail) ) ) != SQLITE_OK ) #endif { aux->length = 0; free( aux->stmt ); aux->stmt = NULL; return -ODBX_ERR_BACKEND; } } switch( ( aux->err = sqlite3_step( aux->res ) ) ) // fetch first row and see if a busy timeout occurs { case SQLITE_BUSY: #ifdef SQLITE_IOERR_BLOCKED case SQLITE_IOERR_BLOCKED: #endif return ODBX_RES_TIMEOUT; } if( ( aux->length = strlen( aux->tail ) ) == 0 ) { free( aux->stmt ); aux->stmt = NULL; } switch( aux->err ) { case SQLITE_ROW: case SQLITE_DONE: case SQLITE_OK: break; default: sqlite3_finalize( aux->res ); aux->res = NULL; return ODBX_ERR_BACKEND; } if( ( *result = (odbx_result_t*) malloc( sizeof( struct odbx_result_t ) ) ) == NULL ) { sqlite3_finalize( aux->res ); aux->res = NULL; return -ODBX_ERR_NOMEM; } (*result)->generic = aux->res; aux->res = NULL; if( sqlite3_column_count( (*result)->generic ) == 0 ) { return ODBX_RES_NOROWS; /* empty or not SELECT like query */ } return ODBX_RES_ROWS; /* result is available */ } static int sqlite3_odbx_result_finish( odbx_result_t* result ) { struct sconn* aux = (struct sconn*) result->handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( result->generic != NULL ) { sqlite3_finalize( (sqlite3_stmt*) result->generic ); result->generic = NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int sqlite3_odbx_row_fetch( odbx_result_t* result ) { struct sconn* aux = (struct sconn*) result->handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } int err = aux->err; if( err != -1 ) { aux->err = -1; } // use original error code the first time else { err = sqlite3_step( (sqlite3_stmt*) result->generic ); } switch( err ) { case SQLITE_ROW: return ODBX_ROW_NEXT; case SQLITE_DONE: case SQLITE_OK: case SQLITE_MISUSE: // Return DONE if function called more often afterwards sqlite3_finalize( (sqlite3_stmt*) result->generic ); result->generic = NULL; return ODBX_ROW_DONE; } return -ODBX_ERR_BACKEND; } static uint64_t sqlite3_odbx_rows_affected( odbx_result_t* result ) { if( result->handle != NULL ) { return (uint64_t) sqlite3_changes( (sqlite3*) result->handle->generic ); } return 0; } static unsigned long sqlite3_odbx_column_count( odbx_result_t* result ) { return (unsigned long) sqlite3_column_count( (sqlite3_stmt*) result->generic ); } static const char* sqlite3_odbx_column_name( odbx_result_t* result, unsigned long pos ) { return (const char*) sqlite3_column_name( (sqlite3_stmt*) result->generic, pos ); } static int sqlite3_odbx_column_type( odbx_result_t* result, unsigned long pos ) { #ifdef HAVE_SQLITE3_TABLE_COLUMN_METADATA const char *type, *collation; int notnull, primarykey, autoinc; #endif switch( sqlite3_column_type( (sqlite3_stmt*) result->generic, pos ) ) { case SQLITE_INTEGER: return ODBX_TYPE_BIGINT; case SQLITE_FLOAT: return ODBX_TYPE_DOUBLE; case SQLITE_BLOB: return ODBX_TYPE_BLOB; case SQLITE_TEXT: return ODBX_TYPE_CLOB; default: #ifdef HAVE_SQLITE3_TABLE_COLUMN_METADATA if( sqlite3_table_column_metadata( (sqlite3*) result->handle->generic, sqlite3_column_database_name( (sqlite3_stmt*) result->generic, pos ), sqlite3_column_table_name( (sqlite3_stmt*) result->generic, pos ), sqlite3_column_origin_name( (sqlite3_stmt*) result->generic, pos ), &type, &collation, ¬null, &primarykey, &autoinc ) != SQLITE_OK ) { return ODBX_TYPE_UNKNOWN; } if( strstr( type, "DOUBLE" ) != NULL || strcmp( type, "FLOAT" ) == 0 || strcmp( type, "REAL" ) == 0 ) { return ODBX_TYPE_DOUBLE; } else if( strstr( type, "INT" ) != NULL || strcmp( type, "BOOLEAN" ) == 0 ) { return ODBX_TYPE_BIGINT; } else if( strstr( type, "CHAR" ) != NULL || strcmp( type, "CLOB" ) == 0 || strcmp( type, "TEXT" ) == 0 ) { return ODBX_TYPE_CLOB; } else if( strstr( type, "DATE" ) != NULL || strstr( type, "TIME" ) != NULL || strstr( type, "DECIMAL" ) != NULL ) { return ODBX_TYPE_CLOB; } else if( strcmp( type, "BLOB" ) == 0 ) { return ODBX_TYPE_BLOB; } else { return ODBX_TYPE_UNKNOWN; } #else return ODBX_TYPE_UNKNOWN; #endif } } static unsigned long sqlite3_odbx_field_length( odbx_result_t* result, unsigned long pos ) { return (unsigned long) sqlite3_column_bytes( (sqlite3_stmt*) result->generic, pos ); } static const char* sqlite3_odbx_field_value( odbx_result_t* result, unsigned long pos ) { return (const char*) sqlite3_column_blob( (sqlite3_stmt*) result->generic, pos ); } opendbx-1.4.6/backends/sybase/0000755000175000017500000000000011765214162013227 500000000000000opendbx-1.4.6/backends/sybase/sybase_basic.c0000644000175000017500000005463511425153447015760 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sybase_basic.h" #include #include #include /* * Declaration of Sybase capabilities */ struct odbx_basic_ops sybase_odbx_basic_ops = { .init = sybase_odbx_init, .bind = sybase_odbx_bind, .unbind = sybase_odbx_unbind, .finish = sybase_odbx_finish, .get_option = sybase_odbx_get_option, .set_option = sybase_odbx_set_option, .error = sybase_odbx_error, .error_type = sybase_odbx_error_type, .escape = NULL, .query = sybase_odbx_query, .result = sybase_odbx_result, .result_finish = sybase_odbx_result_finish, .rows_affected = sybase_odbx_rows_affected, .row_fetch = sybase_odbx_row_fetch, .column_count = sybase_odbx_column_count, .column_name = sybase_odbx_column_name, .column_type = sybase_odbx_column_type, .field_length = sybase_odbx_field_length, .field_value = sybase_odbx_field_value, }; /* * ODBX basic operations * Sybase style */ static int sybase_odbx_init( odbx_t* handle, const char* host, const char* port ) { if( host == NULL ) { return -ODBX_ERR_PARAM; } handle->aux = NULL; handle->generic = NULL; if( ( handle->aux = malloc( sizeof( struct sybconn ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } struct sybconn* aux = (struct sybconn*) handle->aux; aux->ctx = NULL; aux->conn = NULL; aux->host = NULL; aux->hostlen = 0; int err; if( ( err = sybase_priv_init( aux ) ) < 0 ) { sybase_priv_cleanup( handle ); return err; } if( cs_config( aux->ctx, CS_SET, CS_USERDATA, (CS_VOID*) &aux, sizeof( CS_VOID* ), NULL ) != CS_SUCCEED ) { sybase_priv_cleanup( handle ); return -ODBX_ERR_NOMEM; } if( cs_config( aux->ctx, CS_SET, CS_MESSAGE_CB, (CS_VOID*) sybase_priv_csmsg_handler, CS_UNUSED, NULL ) != CS_SUCCEED ) { sybase_priv_cleanup( handle ); return -ODBX_ERR_NOMEM; } if( ct_callback( aux->ctx, NULL, CS_SET, CS_CLIENTMSG_CB, (CS_VOID*) sybase_priv_ctmsg_handler ) != CS_SUCCEED ) { sybase_priv_cleanup( handle ); return -ODBX_ERR_NOMEM; } if( ct_callback( aux->ctx, NULL, CS_SET, CS_SERVERMSG_CB, (CS_VOID*) sybase_priv_svmsg_handler ) != CS_SUCCEED ) { sybase_priv_cleanup( handle ); return -ODBX_ERR_NOMEM; } aux->hostlen = strlen( host ); if( ( aux->host = malloc( aux->hostlen ) ) == NULL ) { sybase_priv_cleanup( handle ); return -ODBX_ERR_NOMEM; } memcpy( aux->host, host, aux->hostlen ); return ODBX_ERR_SUCCESS; } static int sybase_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { if( handle->aux == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } struct sybconn* aux = (struct sybconn*) handle->aux; if( ct_con_alloc( aux->ctx, &(aux->conn) ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ct_con_props( aux->conn, CS_SET, CS_USERNAME, (CS_VOID*) who, CS_NULLTERM, NULL ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ct_con_props( aux->conn, CS_SET, CS_PASSWORD, (CS_VOID*) cred, CS_NULLTERM, NULL ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ct_connect( aux->conn, aux->host, aux->hostlen ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } CS_INT format = CS_OPT_FMTYMD; if( ct_options( aux->conn, CS_SET, CS_OPT_DATEFORMAT, &format, CS_UNUSED, NULL ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } CS_BOOL value = CS_TRUE; if( ct_options( aux->conn, CS_SET, CS_OPT_QUOTED_IDENT, &value, CS_UNUSED, NULL ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } CS_COMMAND* cmd; if( ct_cmd_alloc( aux->conn, &cmd ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } handle->generic = (void*) cmd; if( database != NULL ) { CS_INT rtype; char buffer[64]; size_t buflen; if( ( buflen = snprintf( buffer, 64, "USE %s", database ) ) < 0 ) { return -ODBX_ERR_SIZE; } if( sybase_odbx_query( handle, buffer, buflen ) < 0 ) { return -ODBX_ERR_BACKEND; } while( ct_results( cmd, &rtype ) == CS_SUCCEED ); } return ODBX_ERR_SUCCESS; } static int sybase_odbx_unbind( odbx_t* handle ) { if( handle->generic == NULL || handle->aux == NULL ) { return -ODBX_ERR_PARAM; } struct sybconn* aux = (struct sybconn*) handle->aux; if( ct_cmd_drop( (CS_COMMAND*) handle->generic ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } handle->generic = NULL; if( ct_close( aux->conn, CS_UNUSED ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ct_con_drop( aux->conn ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } aux->conn = NULL; return ODBX_ERR_SUCCESS; } static int sybase_odbx_finish( odbx_t* handle ) { return sybase_priv_cleanup( handle ); } static int sybase_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_TLS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: *((int*) value) = ODBX_DISABLE; break; case ODBX_OPT_THREAD_SAFE: #ifdef HAVE_LIBSYBCT_R *((int*) value) = ODBX_ENABLE; #else *((int*) value) = ODBX_DISABLE; #endif break; case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_CONNECT_TIMEOUT: *((int*) value) = ODBX_ENABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int sybase_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { unsigned int tmp; struct sybconn* aux = (struct sybconn*) handle->aux; if( aux == NULL ) { return -ODBX_ERR_HANDLE; } switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: return -ODBX_ERR_OPTWR; case ODBX_OPT_MULTI_STATEMENTS: break; case ODBX_OPT_CONNECT_TIMEOUT: tmp = *((unsigned int*) value); if( tmp == 0 ) { tmp = CS_NO_LIMIT; } if( ct_config( aux->ctx, CS_SET, CS_LOGIN_TIMEOUT, (CS_VOID*) &tmp, CS_UNUSED, NULL ) != CS_SUCCEED ) { return -ODBX_ERR_OPTWR; } break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static const char* sybase_odbx_error( odbx_t* handle ) { if( handle->aux != NULL ) { return ((struct sybconn*) handle->aux)->errmsg; } return NULL; } static int sybase_odbx_error_type( odbx_t* handle ) { if( handle->aux != NULL ) { return ((struct sybconn*) handle->aux)->errtype; } return -1; } static int sybase_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { if( ct_command( (CS_COMMAND*) handle->generic, CS_LANG_CMD, (CS_VOID*) query, (CS_INT) length, CS_UNUSED ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ct_send( (CS_COMMAND*) handle->generic ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int sybase_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { CS_INT rtype; do { switch( ct_results( (CS_COMMAND*) handle->generic, &rtype ) ) { case CS_SUCCEED: // got result break; case CS_CANCELED: // command finished case CS_END_RESULTS: return ODBX_RES_DONE; // no more results case CS_FAIL: ct_cancel( NULL, (CS_COMMAND*) handle->generic, CS_CANCEL_CURRENT ); #ifdef CS_PENDING case CS_PENDING: // call ct_poll() when CS_NETIO is set to CS_DEFER_IO #endif #ifdef CS_BUSY case CS_BUSY: #endif default: return -ODBX_ERR_BACKEND; } } while( rtype == CS_CMD_DONE ); if( (*result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*result)->generic = NULL; (*result)->aux = NULL; int i; CS_INT cols; struct sybres* val; CS_DATAFMT* fmt; switch( rtype ) { case CS_CMD_SUCCEED: // insert, update or delete statement case CS_CMD_DONE: // affected rows available return ODBX_RES_NOROWS; // not select like query case CS_ROW_RESULT: // regular result if( ct_res_info( (CS_COMMAND*) handle->generic, CS_NUMDATA, (CS_VOID*) &cols, sizeof( CS_INT ), NULL ) != CS_SUCCEED ) { free( *result ); return -ODBX_ERR_BACKEND; } if( ( (*result)->aux = malloc( sizeof( struct sybares ) ) ) == NULL ) { free( *result ); return -ODBX_ERR_NOMEM; } ((struct sybares*) (*result)->aux)->cols = cols; if( ( (*result)->generic = malloc( cols * sizeof( struct sybres ) ) ) == NULL ) { sybase_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } if( ( ((struct sybares*) (*result)->aux)->fmt = (CS_DATAFMT*) malloc( cols * sizeof( CS_DATAFMT ) ) ) == NULL ) { sybase_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } val = (struct sybres*) (*result)->generic; fmt = ((struct sybares*) (*result)->aux)->fmt; memset( fmt, 0, cols * sizeof( CS_DATAFMT ) ); for( i = 0; i < cols; i++ ) { if( ct_describe( (CS_COMMAND*) handle->generic, i + 1, fmt + i ) != CS_SUCCEED ) { sybase_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } fmt[i].maxlength = sybase_priv_collength( fmt + i ); fmt[i].format = CS_FMT_UNUSED; // FreeTDS bug workaround if( ( val[i].value = (CS_CHAR*) malloc( fmt[i].maxlength ) ) == NULL ) { sybase_odbx_result_finish( *result ); return -ODBX_ERR_NOMEM; } if( ct_bind( (CS_COMMAND*) handle->generic, i+1, fmt + i, val[i].value, &(val[i].length), &(val[i].status) ) != CS_SUCCEED ) { sybase_odbx_result_finish( *result ); return -ODBX_ERR_BACKEND; } } return ODBX_RES_ROWS; // result is available case CS_COMPUTE_RESULT: // currently not supported case CS_CURSOR_RESULT: case CS_STATUS_RESULT: case CS_PARAM_RESULT: case CS_FAIL: default: free( *result ); *result = NULL; return -ODBX_ERR_BACKEND; } } static int sybase_odbx_result_finish( odbx_result_t* result ) { unsigned long i; struct sybres* val = (struct sybres*) result->generic; struct sybares* aux = (struct sybares*) result->aux; if( val != NULL && aux != NULL ) { for( i = 0; i < aux->cols; i++ ) { if( val[i].value ) { free( val[i].value ); val[i].value = 0; } } free( result->generic ); result->generic =NULL; if( aux->fmt != NULL ) { free( aux->fmt ); aux->fmt = NULL; } free( result->aux ); result->aux =NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int sybase_odbx_row_fetch( odbx_result_t* result ) { if( result->handle == NULL || result->handle->aux == NULL ) { return -ODBX_ERR_PARAM; } switch( ct_fetch( (CS_COMMAND*) result->handle->generic, CS_UNUSED, CS_UNUSED, CS_UNUSED, NULL ) ) { case CS_SUCCEED: break; case CS_END_DATA: return ODBX_ROW_DONE; case CS_ROW_FAIL: case CS_CANCELED: #ifdef CS_PENDING case CS_PENDING: #endif #ifdef CS_BUSY case CS_BUSY: #endif case CS_FAIL: default: return -ODBX_ERR_BACKEND; } return sybase_priv_convert( result ); } static uint64_t sybase_odbx_rows_affected( odbx_result_t* result ) { CS_INT rows; if( result->handle != NULL && ct_res_info( (CS_COMMAND*) result->handle->generic, CS_ROW_COUNT, (CS_VOID*) &rows, sizeof( CS_INT ), NULL ) == CS_SUCCEED ) { if( rows != CS_NO_COUNT ) { return (uint64_t) rows; } } return 0; } static unsigned long sybase_odbx_column_count( odbx_result_t* result ) { if( result->aux != NULL ) { return ((struct sybares*) result->aux)->cols; } return 0; } static const char* sybase_odbx_column_name( odbx_result_t* result, unsigned long pos ) { struct sybares* aux = (struct sybares*) result->aux; if( aux != NULL && aux->fmt != NULL && pos < aux->cols ) { return aux->fmt[pos].name; } return NULL; } static int sybase_odbx_column_type( odbx_result_t* result, unsigned long pos ) { struct sybares* aux = (struct sybares*) result->aux; if( aux != NULL && aux->fmt != NULL && pos < aux->cols ) { switch( aux->fmt[pos].datatype ) { case CS_SMALLINT_TYPE: return ODBX_TYPE_SMALLINT; case CS_INT_TYPE: return ODBX_TYPE_INTEGER; #ifdef CS_BIGINT_TYPE case CS_BIGINT_TYPE: return ODBX_TYPE_BIGINT; #endif case CS_NUMERIC_TYPE: case CS_DECIMAL_TYPE: return ODBX_TYPE_DECIMAL; case CS_REAL_TYPE: return ODBX_TYPE_REAL; case CS_FLOAT_TYPE: return ODBX_TYPE_DOUBLE; case CS_CHAR_TYPE: return ODBX_TYPE_CHAR; case CS_UNICHAR_TYPE: return ODBX_TYPE_NCHAR; case CS_VARCHAR_TYPE: return ODBX_TYPE_VARCHAR; case CS_TEXT_TYPE: return ODBX_TYPE_CLOB; #ifdef CS_XML_TYPE case CS_XML_TYPE: return ODBX_TYPE_XML; #endif case CS_IMAGE_TYPE: #ifdef CS_BLOB_TYPE case CS_BLOB_TYPE: #endif return ODBX_TYPE_BLOB; #ifdef CS_TIME_TYPE case CS_TIME_TYPE: return ODBX_TYPE_TIME; #endif case CS_DATETIME_TYPE: case CS_DATETIME4_TYPE: return ODBX_TYPE_TIMESTAMP; #ifdef CS_DATE_TYPE case CS_DATE_TYPE: return ODBX_TYPE_DATE; #endif case CS_VOID_TYPE: case CS_MONEY_TYPE: case CS_MONEY4_TYPE: case CS_BINARY_TYPE: case CS_VARBINARY_TYPE: case CS_LONGCHAR_TYPE: case CS_LONGBINARY_TYPE: #ifdef CS_UNITEXT_TYPE case CS_UNITEXT_TYPE: #endif case CS_BIT_TYPE: case CS_TINYINT_TYPE: case CS_USHORT_TYPE: #ifdef CS_USMALLINT_TYPE case CS_USMALLINT_TYPE: #endif #ifdef CS_UINT_TYPE case CS_UINT_TYPE: #endif case CS_LONG_TYPE: #ifdef CS_UBIGINT_TYPE case CS_UBIGINT_TYPE: #endif case CS_SENSITIVITY_TYPE: case CS_BOUNDARY_TYPE: default: return ODBX_TYPE_UNKNOWN; } } return -ODBX_ERR_PARAM; } static unsigned long sybase_odbx_field_length( odbx_result_t* result, unsigned long pos ) { struct sybres* val = (struct sybres*) result->generic; struct sybares* aux = (struct sybares*) result->aux; if( val != NULL && aux != NULL && pos < aux->cols && val[pos].status != -1 ) { return val[pos].length; } return 0; } static const char* sybase_odbx_field_value( odbx_result_t* result, unsigned long pos ) { struct sybres* val = (struct sybres*) result->generic; struct sybares* aux = (struct sybares*) result->aux; if( val != NULL && aux != NULL && pos < aux->cols && val[pos].status != -1 ) { return val[pos].value; } return NULL; } /* * Private Sybase functions */ static int sybase_priv_init( struct sybconn* aux ) { #ifdef CS_VERSION_150 if( cs_ctx_alloc( CS_VERSION_150, &(aux->ctx) ) == CS_SUCCEED ) { if( ct_init( aux->ctx, CS_VERSION_150 ) == CS_SUCCEED ) { return ODBX_ERR_SUCCESS; } cs_ctx_drop( aux->ctx ); } #endif #ifdef CS_VERSION_125 if( cs_ctx_alloc( CS_VERSION_125, &(aux->ctx) ) == CS_SUCCEED ) { if( ct_init( aux->ctx, CS_VERSION_125 ) == CS_SUCCEED ) { return ODBX_ERR_SUCCESS; } cs_ctx_drop( aux->ctx ); } #endif #ifdef CS_VERSION_110 if( cs_ctx_alloc( CS_VERSION_110, &(aux->ctx) ) == CS_SUCCEED ) { if( ct_init( aux->ctx, CS_VERSION_110 ) == CS_SUCCEED ) { return ODBX_ERR_SUCCESS; } cs_ctx_drop( aux->ctx ); } #endif if( cs_ctx_alloc( CS_VERSION_100, &(aux->ctx) ) == CS_SUCCEED ) { if( ct_init( aux->ctx, CS_VERSION_100 ) == CS_SUCCEED ) { return ODBX_ERR_SUCCESS; } cs_ctx_drop( aux->ctx ); } return -ODBX_ERR_NOTSUP; } static int sybase_priv_cleanup( odbx_t* handle ) { struct sybconn* aux = (struct sybconn*) handle->aux; if( aux == NULL ) { return -ODBX_ERR_PARAM; } if( aux->host != NULL ) { free( aux->host ); aux->host = NULL; } if( aux->ctx != NULL ) { if( ct_exit( aux->ctx, CS_UNUSED ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( cs_ctx_drop( aux->ctx ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } aux->ctx = NULL; } free( aux ); handle->aux = NULL; return ODBX_ERR_SUCCESS; } static int sybase_priv_convert( odbx_result_t* result ) { if( result->handle == NULL || result->generic == NULL || result->aux == NULL ) { return -ODBX_ERR_PARAM; } int i; CS_DATEREC di; CS_NUMERIC dec; CS_DATAFMT dest; CS_INT cols = ((struct sybares*) result->aux)->cols; CS_DATAFMT* fmt = (CS_DATAFMT*) ((struct sybares*) result->aux)->fmt; struct sybconn* conn = (struct sybconn*) result->handle->aux; struct sybres* val = (struct sybres*) result->generic; for( i = 0; i < cols; i++ ) { switch( fmt[i].datatype ) { case CS_BIT_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%d", *((CS_BIT*) val[i].value) ); break; case CS_TINYINT_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%d", *((CS_TINYINT*) val[i].value) ); break; case CS_SMALLINT_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%d", *((CS_SMALLINT*) val[i].value) ); break; case CS_INT_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%ld", (long) *((CS_INT*) val[i].value) ); break; #if defined( CS_BIGINT_TYPE ) case CS_BIGINT_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%lld", *((CS_BIGINT*) val[i].value) ); break; #endif case CS_DECIMAL_TYPE: case CS_NUMERIC_TYPE: dest.maxlength = sybase_priv_collength( fmt + i ); dest.datatype = CS_CHAR_TYPE; dest.format = CS_FMT_NULLTERM; dest.locale = NULL; memcpy( &dec, val[i].value, sizeof( CS_NUMERIC ) ); if( cs_convert( conn->ctx, fmt + i, (CS_VOID*) &dec, &dest, (CS_VOID*) val[i].value, &(val[i].length) ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } break; case CS_REAL_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%f", *((CS_REAL*) val[i].value) ); break; case CS_FLOAT_TYPE: val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%f", *((CS_FLOAT*) val[i].value) ); break; #ifdef CS_DATE_TYPE case CS_DATE_TYPE: if( cs_dt_crack( conn->ctx, fmt[i].datatype, (CS_VOID*) val[i].value, &di ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ( val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%.4ld-%.2ld-%.2ld", (long) di.dateyear, (long) di.datemonth+1, (long) di.datedmonth ) ) < 0 ) { return -ODBX_ERR_SIZE; } break; #endif #ifdef CS_TIME_TYPE case CS_TIME_TYPE: if( cs_dt_crack( conn->ctx, fmt[i].datatype, (CS_VOID*) val[i].value, &di ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ( val[i].length = snprintf( val[i].value, sybase_priv_collength( fmt + i ), "%.2ld:%.2ld:%.2ld", (long) di.datehour,(long) di.dateminute, (long) di.datesecond ) ) < 0 ) { return -ODBX_ERR_SIZE; } break; #endif case CS_DATETIME4_TYPE: case CS_DATETIME_TYPE: if( cs_dt_crack( conn->ctx, fmt[i].datatype, (CS_VOID*) val[i].value, &di ) != CS_SUCCEED ) { return -ODBX_ERR_BACKEND; } if( ( val[i].length = snprintf( val[i].value, 20, "%.4ld-%.2ld-%.2ld %.2ld:%.2ld:%.2ld", (long) di.dateyear, (long) di.datemonth+1, (long) di.datedmonth, (long) di.datehour,(long) di.dateminute, (long) di.datesecond ) ) < 0 ) { return -ODBX_ERR_SIZE; } break; case CS_CHAR_TYPE: case CS_VARCHAR_TYPE: case CS_LONGCHAR_TYPE: case CS_UNICHAR_TYPE: case CS_TEXT_TYPE: val[i].value[val[i].length] = 0; break; } } return ODBX_ROW_NEXT; } static CS_INT sybase_priv_collength( CS_DATAFMT* column ) { switch( column->datatype ) { case CS_CHAR_TYPE: case CS_LONGCHAR_TYPE: case CS_VARCHAR_TYPE: case CS_TEXT_TYPE: return column->maxlength + 1; case CS_IMAGE_TYPE: case CS_UNICHAR_TYPE: case CS_BINARY_TYPE: case CS_VARBINARY_TYPE: return column->maxlength + 1; case CS_BIT_TYPE: return 2; case CS_TINYINT_TYPE: return 5; case CS_SMALLINT_TYPE: return 7; case CS_INT_TYPE: return 12; #ifdef CS_BIGINT_TYPE case CS_BIGINT_TYPE: return 22; #endif case CS_REAL_TYPE: return 42; case CS_FLOAT_TYPE: return 312; case CS_MONEY_TYPE: case CS_MONEY4_TYPE: return 25; #ifdef CS_DATE_TYPE case CS_DATE_TYPE: return 11; #endif #ifdef CS_TIME_TYPE case CS_TIME_TYPE: return 9; #endif case CS_DATETIME_TYPE: case CS_DATETIME4_TYPE: return 20; case CS_NUMERIC_TYPE: case CS_DECIMAL_TYPE: return column->precision > sizeof( CS_NUMERIC ) ? column->precision + 2 : sizeof( CS_NUMERIC ) + 2; default: return 12; } } static CS_RETCODE CS_PUBLIC sybase_priv_csmsg_handler( CS_CONTEXT* ctx, CS_CLIENTMSG* msg ) { size_t len = 0; CS_RETCODE err; struct sybconn* aux; if( ( err = cs_config( ctx, CS_GET, CS_USERDATA, &aux, sizeof( void* ), NULL ) ) != CS_SUCCEED ) { return CS_SUCCEED; } len = snprintf( aux->errmsg, SYBASE_ERRLEN, "cslib : %s", msg->msgstring ); if( msg->osstringlen > 0 ) { len += snprintf( aux->errmsg + len, SYBASE_ERRLEN, " - %s", msg->osstring ); } snprintf( aux->errmsg + len, SYBASE_ERRLEN, "\n" ); switch( CS_SEVERITY( msg->severity ) ) { #ifdef CS_SV_INFORM case CS_SV_INFORM: #endif case CS_SV_RETRY_FAIL: aux->errtype = 1; return CS_SUCCEED; default: aux->errtype = -1; return CS_FAIL; } } static CS_RETCODE CS_PUBLIC sybase_priv_ctmsg_handler( CS_CONTEXT* ctx, CS_CONNECTION* conn, CS_CLIENTMSG* msg ) { size_t len = 0; CS_RETCODE err; struct sybconn* aux; if( ( err = cs_config( ctx, CS_GET, CS_USERDATA, &aux, sizeof( void* ), NULL ) ) != CS_SUCCEED ) { return CS_SUCCEED; } len = snprintf( aux->errmsg, SYBASE_ERRLEN, "ctlib : %s", msg->msgstring ); if( msg->osstringlen > 0 ) { len += snprintf( aux->errmsg + len, SYBASE_ERRLEN, " - %s", msg->osstring ); } snprintf( aux->errmsg + len, SYBASE_ERRLEN, "\n" ); switch( CS_SEVERITY( msg->severity ) ) { #ifdef CS_SV_INFORM case CS_SV_INFORM: #endif case CS_SV_RETRY_FAIL: aux->errtype = 1; return CS_SUCCEED; default: aux->errtype = -1; return CS_FAIL; } } static CS_RETCODE CS_PUBLIC sybase_priv_svmsg_handler( CS_CONTEXT* ctx, CS_CONNECTION* conn, CS_SERVERMSG* msg ) { size_t len = 0; CS_RETCODE err; struct sybconn* aux; switch( msg->msgnumber ) { case 5701: // database changed case 5703: // language changed case 5704: // character set changed return CS_SUCCEED; } if( ( err = cs_config( ctx, CS_GET, CS_USERDATA, &aux, sizeof( void* ), NULL ) ) != CS_SUCCEED ) { return CS_SUCCEED; } if( msg->svrnlen > 0 ) { len = snprintf( aux->errmsg, SYBASE_ERRLEN, "%s: ", msg->svrname ); } if( msg->proclen > 0 ) { len += snprintf( aux->errmsg + len, SYBASE_ERRLEN, "(Procedure: %s) ", msg->proc ); } snprintf( aux->errmsg + len, SYBASE_ERRLEN, "%s\n", msg->text ); aux->errtype = 1; return CS_SUCCEED; } opendbx-1.4.6/backends/sybase/sybase_basic.h0000644000175000017500000000450311425153447015752 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sybasebackend.h" #ifndef SYBASE_BASIC_H #define SYBASE_BASIC_H /* * Basic operations */ static int sybase_odbx_init( odbx_t* handle, const char* host, const char* port ); static int sybase_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int sybase_odbx_unbind( odbx_t* handle ); static int sybase_odbx_finish( odbx_t* handle ); static int sybase_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int sybase_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* sybase_odbx_error( odbx_t* handle ); static int sybase_odbx_error_type( odbx_t* handle ); static int sybase_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int sybase_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int sybase_odbx_result_finish( odbx_result_t* result ); static int sybase_odbx_row_fetch( odbx_result_t* result ); static uint64_t sybase_odbx_rows_affected( odbx_result_t* result ); static unsigned long sybase_odbx_column_count( odbx_result_t* result ); static const char* sybase_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int sybase_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long sybase_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* sybase_odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * Private functions */ static int sybase_priv_init( struct sybconn* aux ); static int sybase_priv_cleanup( odbx_t* handle ); static int sybase_priv_convert( odbx_result_t* result ); static CS_INT sybase_priv_collength( CS_DATAFMT* column ); static CS_RETCODE CS_PUBLIC sybase_priv_csmsg_handler( CS_CONTEXT* ctx, CS_CLIENTMSG* msg ); static CS_RETCODE CS_PUBLIC sybase_priv_ctmsg_handler( CS_CONTEXT* ctx, CS_CONNECTION* conn, CS_CLIENTMSG* msg ); static CS_RETCODE CS_PUBLIC sybase_priv_svmsg_handler( CS_CONTEXT* ctx, CS_CONNECTION* conn, CS_SERVERMSG* msg ); #endif opendbx-1.4.6/backends/sybase/Makefile.in0000644000175000017500000005167411765211301015221 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/sybase DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libsybasebackend_la_DEPENDENCIES = am_libsybasebackend_la_OBJECTS = libsybasebackend_la-sybasebackend.lo \ libsybasebackend_la-sybase_basic.lo libsybasebackend_la_OBJECTS = $(am_libsybasebackend_la_OBJECTS) libsybasebackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libsybasebackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libsybasebackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libsybasebackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libsybasebackend_la_SOURCES) DIST_SOURCES = $(libsybasebackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libsybasebackend.la @SINGLELIB_FALSE@libsybasebackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libsybasebackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libsybasebackend.la @SINGLELIB_FALSE@libsybasebackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libsybasebackend_la_SOURCES = sybasebackend.h sybasebackend.c sybase_basic.h sybase_basic.c libsybasebackend_la_LIBADD = -l@LIBSYBASE@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/sybase/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/sybase/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libsybasebackend.la: $(libsybasebackend_la_OBJECTS) $(libsybasebackend_la_DEPENDENCIES) $(libsybasebackend_la_LINK) $(am_libsybasebackend_la_rpath) $(libsybasebackend_la_OBJECTS) $(libsybasebackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsybasebackend_la-sybase_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsybasebackend_la-sybasebackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libsybasebackend_la-sybasebackend.lo: sybasebackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsybasebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsybasebackend_la-sybasebackend.lo -MD -MP -MF $(DEPDIR)/libsybasebackend_la-sybasebackend.Tpo -c -o libsybasebackend_la-sybasebackend.lo `test -f 'sybasebackend.c' || echo '$(srcdir)/'`sybasebackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libsybasebackend_la-sybasebackend.Tpo $(DEPDIR)/libsybasebackend_la-sybasebackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sybasebackend.c' object='libsybasebackend_la-sybasebackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsybasebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsybasebackend_la-sybasebackend.lo `test -f 'sybasebackend.c' || echo '$(srcdir)/'`sybasebackend.c libsybasebackend_la-sybase_basic.lo: sybase_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsybasebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libsybasebackend_la-sybase_basic.lo -MD -MP -MF $(DEPDIR)/libsybasebackend_la-sybase_basic.Tpo -c -o libsybasebackend_la-sybase_basic.lo `test -f 'sybase_basic.c' || echo '$(srcdir)/'`sybase_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libsybasebackend_la-sybase_basic.Tpo $(DEPDIR)/libsybasebackend_la-sybase_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sybase_basic.c' object='libsybasebackend_la-sybase_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsybasebackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libsybasebackend_la-sybase_basic.lo `test -f 'sybase_basic.c' || echo '$(srcdir)/'`sybase_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/sybase/Makefile.am0000644000175000017500000000076211425153447015211 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libsybasebackend.la libsybasebackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libsybasebackend.la libsybasebackend_la_CPPFLAGS = libsybasebackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libsybasebackend_la_SOURCES = sybasebackend.h sybasebackend.c sybase_basic.h sybase_basic.c libsybasebackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libsybasebackend_la_LIBADD = -l@LIBSYBASE@ opendbx-1.4.6/backends/sybase/sybasebackend.h0000644000175000017500000000252011425153447016116 00000000000000/* * Sybase driver for OpenDBX * Copyright (C) 2006-2007 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #include #include #ifndef SYBASEBACKEND_H #define SYBASEBACKEND_H #define SYBASE_ERRLEN 512 /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct sybconn { char* host; size_t hostlen; CS_CONTEXT* ctx; CS_CONNECTION* conn; int errtype; char errmsg[SYBASE_ERRLEN]; }; struct sybres { CS_CHAR* value; CS_INT length; CS_SMALLINT status; }; struct sybares { CS_INT cols; CS_DATAFMT* fmt; }; #endif opendbx-1.4.6/backends/sybase/sybasebackend.c0000644000175000017500000000111711425153447016112 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2006-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "sybasebackend.h" /* * Declaration of Sybase capabilities */ extern struct odbx_basic_ops sybase_odbx_basic_ops; struct odbx_ops sybase_odbx_ops = { .basic = &sybase_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &sybase_odbx_ops; } #endif opendbx-1.4.6/backends/odbc/0000755000175000017500000000000011765214162012650 500000000000000opendbx-1.4.6/backends/odbc/odbcbackend.c0000644000175000017500000000114711425153447015157 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbxdrv.h" /* * Declaration of ODBC capabilities */ extern struct odbx_basic_ops odbc_odbx_basic_ops; extern struct odbx_lo_ops odbc_odbx_lo_ops; struct odbx_ops odbc_odbx_ops = { .basic = &odbc_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &odbc_odbx_ops; } #endif opendbx-1.4.6/backends/odbc/Makefile.in0000644000175000017500000005141311765211301014631 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/odbc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libodbcbackend_la_DEPENDENCIES = am_libodbcbackend_la_OBJECTS = libodbcbackend_la-odbcbackend.lo \ libodbcbackend_la-odbc_basic.lo libodbcbackend_la_OBJECTS = $(am_libodbcbackend_la_OBJECTS) libodbcbackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libodbcbackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libodbcbackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libodbcbackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libodbcbackend_la_SOURCES) DIST_SOURCES = $(libodbcbackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libodbcbackend.la @SINGLELIB_FALSE@libodbcbackend_la_CPPFLAGS = -DAPINUMBER=@APINUMBER@ \ @SINGLELIB_FALSE@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libodbcbackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libodbcbackend.la @SINGLELIB_FALSE@libodbcbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libodbcbackend_la_SOURCES = odbcbackend.h odbcbackend.c odbc_basic.h odbc_basic.c libodbcbackend_la_LIBADD = -l@LIBODBC@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/odbc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/odbc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libodbcbackend.la: $(libodbcbackend_la_OBJECTS) $(libodbcbackend_la_DEPENDENCIES) $(libodbcbackend_la_LINK) $(am_libodbcbackend_la_rpath) $(libodbcbackend_la_OBJECTS) $(libodbcbackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libodbcbackend_la-odbc_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libodbcbackend_la-odbcbackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libodbcbackend_la-odbcbackend.lo: odbcbackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libodbcbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libodbcbackend_la-odbcbackend.lo -MD -MP -MF $(DEPDIR)/libodbcbackend_la-odbcbackend.Tpo -c -o libodbcbackend_la-odbcbackend.lo `test -f 'odbcbackend.c' || echo '$(srcdir)/'`odbcbackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libodbcbackend_la-odbcbackend.Tpo $(DEPDIR)/libodbcbackend_la-odbcbackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='odbcbackend.c' object='libodbcbackend_la-odbcbackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libodbcbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libodbcbackend_la-odbcbackend.lo `test -f 'odbcbackend.c' || echo '$(srcdir)/'`odbcbackend.c libodbcbackend_la-odbc_basic.lo: odbc_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libodbcbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libodbcbackend_la-odbc_basic.lo -MD -MP -MF $(DEPDIR)/libodbcbackend_la-odbc_basic.Tpo -c -o libodbcbackend_la-odbc_basic.lo `test -f 'odbc_basic.c' || echo '$(srcdir)/'`odbc_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libodbcbackend_la-odbc_basic.Tpo $(DEPDIR)/libodbcbackend_la-odbc_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='odbc_basic.c' object='libodbcbackend_la-odbc_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libodbcbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libodbcbackend_la-odbc_basic.lo `test -f 'odbc_basic.c' || echo '$(srcdir)/'`odbc_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/odbc/Makefile.am0000644000175000017500000000073011425153447014625 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libodbcbackend.la libodbcbackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libodbcbackend.la libodbcbackend_la_CPPFLAGS = libodbcbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libodbcbackend_la_SOURCES = odbcbackend.h odbcbackend.c odbc_basic.h odbc_basic.c libodbcbackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libodbcbackend_la_LIBADD = -l@LIBODBC@ opendbx-1.4.6/backends/odbc/odbcbackend.h0000644000175000017500000000266111425153447015166 00000000000000/* * ODBC driver for OpenDBX * Copyright (C) 2008 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ // MinGW workaround #ifdef HAVE_WINDEF_H # include #endif #include #include #ifndef ODBCBACKEND_H #define ODBCBACKEND_H // TODO: check if correct #define ODBC_COLNAMELEN 64 /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct odbcgen { SQLHENV env; SQLHDBC conn; SQLHSTMT stmt; SQLRETURN err; char* server; char* errmsg[SQL_MAX_MESSAGE_LENGTH]; int resnum; }; struct odbcres { SQLPOINTER buffer; SQLINTEGER buflen; SQLLEN ind; }; struct odbcraux { unsigned long cols; char colname[ODBC_COLNAMELEN]; }; #endif opendbx-1.4.6/backends/odbc/odbc_basic.c0000644000175000017500000004324311752475754015026 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include #include #include #include "odbxdrv.h" #include "odbc_basic.h" /* * Declaration of ODBC capabilities */ struct odbx_basic_ops odbc_odbx_basic_ops = { .init = odbc_odbx_init, .bind = odbc_odbx_bind, .unbind = odbc_odbx_unbind, .finish = odbc_odbx_finish, .get_option = odbc_odbx_get_option, .set_option = odbc_odbx_set_option, .error = odbc_odbx_error, .error_type = odbc_odbx_error_type, .escape = NULL, .query = odbc_odbx_query, .result = odbc_odbx_result, .result_finish = odbc_odbx_result_finish, .rows_affected = odbc_odbx_rows_affected, .row_fetch = odbc_odbx_row_fetch, .column_count = odbc_odbx_column_count, .column_name = odbc_odbx_column_name, .column_type = odbc_odbx_column_type, .field_length = odbc_odbx_field_length, .field_value = odbc_odbx_field_value, }; /* * OpenDBX basic operations * ODBC style */ static int odbc_odbx_init( odbx_t* handle, const char* host, const char* port ) { if( ( handle->generic = malloc( sizeof( struct odbcgen ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } struct odbcgen* gen = (struct odbcgen*) handle->generic; gen->env = NULL; gen->conn = NULL; gen->stmt = NULL; gen->err = SQLAllocHandle( SQL_HANDLE_ENV, SQL_NULL_HANDLE, &(gen->env) ); if( SQL_SUCCEEDED( gen->err ) ) { gen->err = SQLSetEnvAttr( gen->env, SQL_ATTR_ODBC_VERSION, (void*) SQL_OV_ODBC3, 0 ); if( SQL_SUCCEEDED( gen->err ) ) { gen->err = SQLAllocHandle( SQL_HANDLE_DBC, gen->env, &(gen->conn) ); if( SQL_SUCCEEDED( gen->err ) ) { int len = strlen( host ) + 1; if( ( gen->server = (char*) malloc( len ) ) != NULL ) { memcpy( gen->server, host, len ); return ODBX_ERR_SUCCESS; } gen->err = SQLFreeHandle( SQL_HANDLE_DBC, gen->conn ); } } gen->err = SQLFreeHandle( SQL_HANDLE_ENV, gen->env ); } free( handle->generic ); return -ODBX_ERR_NOMEM; } static int odbc_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { if( handle->generic == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } struct odbcgen* gen = (struct odbcgen*) handle->generic; size_t wlen = 0; size_t clen = 0; if( who != NULL ) { wlen = strlen( who ); } if( cred != NULL ) { clen = strlen( cred ); } gen->err = SQLSetConnectAttr( gen->conn, SQL_ATTR_CURRENT_CATALOG, (SQLCHAR*) database, strlen( database ) ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } gen->err = SQLSetConnectAttr( gen->conn, SQL_TXN_ISOLATION, (SQLPOINTER) SQL_TXN_READ_COMMITTED, SQL_IS_UINTEGER ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } /* Doesn't work with Windows ODBC gen->err = SQLSetConnectAttr( gen->conn, SQL_ATTR_ASYNC_ENABLE, (SQLPOINTER) SQL_ASYNC_ENABLE_ON, SQL_IS_UINTEGER ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } gen->err = SQLSetConnectAttr( gen->conn, SQL_ATTR_ANSI_APP, (SQLPOINTER) SQL_AA_FALSE, SQL_IS_UINTEGER ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } */ gen->err = SQLConnect( gen->conn, (SQLCHAR*) gen->server, strlen( gen->server ), (SQLCHAR*) who, wlen, (SQLCHAR*) cred, clen ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } gen->err = SQLSetConnectAttr( gen->conn, SQL_ATTR_AUTOCOMMIT, (SQLPOINTER) SQL_AUTOCOMMIT_ON, SQL_IS_INTEGER ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int odbc_odbx_unbind( odbx_t* handle ) { if( handle->generic == NULL ) { return -ODBX_ERR_PARAM; } struct odbcgen* gen = (struct odbcgen*) handle->generic; gen->err = SQLDisconnect( gen->conn ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } static int odbc_odbx_finish( odbx_t* handle ) { if( handle->generic == NULL ) { return -ODBX_ERR_PARAM; } struct odbcgen* gen = (struct odbcgen*) handle->generic; if( gen->conn != NULL && ( gen->err = SQLFreeHandle( SQL_HANDLE_DBC, gen->conn ) ) != SQL_SUCCESS ) { return -ODBX_ERR_BACKEND; } gen->conn = NULL; if( gen->env != NULL && ( gen->err = SQLFreeHandle( SQL_HANDLE_ENV, gen->env ) ) != SQL_SUCCESS ) { return -ODBX_ERR_HANDLE; } gen->env = NULL; if( gen->server != NULL ) { free( gen->server ); } free( handle->generic ); return ODBX_ERR_SUCCESS; } static int odbc_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_THREAD_SAFE: case ODBX_OPT_CONNECT_TIMEOUT: *(int*) value = ODBX_ENABLE; break; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: *(int*) value = ODBX_DISABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int odbc_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: case ODBX_OPT_MULTI_STATEMENTS: case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_COMPRESS: return -ODBX_ERR_OPTWR; case ODBX_OPT_CONNECT_TIMEOUT: ; // gcc workaround struct odbcgen* gen = (struct odbcgen*) handle->generic; gen->err = SQLSetConnectAttr( gen->conn, SQL_ATTR_LOGIN_TIMEOUT, (SQLPOINTER) value, SQL_IS_UINTEGER ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } break; default: return -ODBX_ERR_OPTION; } return -ODBX_ERR_SUCCESS; } static const char* odbc_odbx_error( odbx_t* handle ) { SQLRETURN err; SQLCHAR sqlstate[6]; SQLINTEGER nerror; SQLSMALLINT msglen = 0; struct odbcgen* gen = (struct odbcgen*) handle->generic; if( gen->stmt != NULL ) { err = SQLGetDiagRec( SQL_HANDLE_STMT, gen->stmt, 1, sqlstate, &nerror, (SQLCHAR*) gen->errmsg, sizeof( gen->errmsg ), &msglen ); if( SQL_SUCCEEDED( err ) ) { return (const char*) gen->errmsg; } } if( gen->conn != NULL ) { err = SQLGetDiagRec( SQL_HANDLE_DBC, gen->conn, 1, sqlstate, &nerror, (SQLCHAR*) gen->errmsg, sizeof( gen->errmsg ), &msglen ); if( SQL_SUCCEEDED( err ) ) { return (const char*) gen->errmsg; } } if( gen->env != NULL ) { err = SQLGetDiagRec( SQL_HANDLE_ENV, gen->env, 1, sqlstate, &nerror, (SQLCHAR*) gen->errmsg, sizeof( gen->errmsg ), &msglen ); if( SQL_SUCCEEDED( err ) ) { return (const char*) gen->errmsg; } } return NULL; } static int odbc_odbx_error_type( odbx_t* handle ) { struct odbcgen* gen = (struct odbcgen*) handle->generic; switch( ((struct odbcgen*) handle->generic)->err ) { case SQL_SUCCESS: return 0; case SQL_SUCCESS_WITH_INFO: case SQL_NEED_DATA: case SQL_NO_DATA: case SQL_STILL_EXECUTING: return 1; } char sqlstate[6]; SQLRETURN err; SQLINTEGER nerror; SQLSMALLINT msglen = 0; SQLCHAR buffer; if( gen->stmt != NULL ) { err = SQLGetDiagRec( SQL_HANDLE_STMT, gen->stmt, 1, (SQLCHAR*) sqlstate, &nerror, &buffer, sizeof( buffer ), &msglen ); switch( err ) { case SQL_SUCCESS: case SQL_SUCCESS_WITH_INFO: if( strncmp( sqlstate, "08", 2 ) == 0 ) { return -1; } if( strncmp( sqlstate, "IM", 2 ) == 0 ) { return -1; } case SQL_NEED_DATA: case SQL_NO_DATA: case SQL_STILL_EXECUTING: return 1; } } if( gen->conn != NULL ) { err = SQLGetDiagRec( SQL_HANDLE_DBC, gen->conn, 1, (SQLCHAR*) sqlstate, &nerror, &buffer, sizeof( buffer ), &msglen ); switch( err ) { case SQL_SUCCESS: case SQL_SUCCESS_WITH_INFO: if( strncmp( sqlstate, "08", 2 ) == 0 ) { return -1; } if( strncmp( sqlstate, "IM", 2 ) == 0 ) { return -1; } break; case SQL_NEED_DATA: case SQL_NO_DATA: case SQL_STILL_EXECUTING: return 1; } } if( gen->env != NULL ) { err = SQLGetDiagRec( SQL_HANDLE_ENV, gen->env, 1, (SQLCHAR*) sqlstate, &nerror, &buffer, sizeof( buffer ), &msglen ); switch( err ) { case SQL_SUCCESS: case SQL_SUCCESS_WITH_INFO: if( strncmp( sqlstate, "08", 2 ) == 0 ) { return -1; } if( strncmp( sqlstate, "IM", 2 ) == 0 ) { return -1; } break; case SQL_NEED_DATA: case SQL_NO_DATA: case SQL_STILL_EXECUTING: return 1; } } return -1; } static int odbc_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { struct odbcgen* gen = (struct odbcgen*) handle->generic; gen->resnum = 0; if( gen->stmt != NULL ) { gen->err = SQLFreeHandle( SQL_HANDLE_STMT, gen->stmt ); if( !SQL_SUCCEEDED( gen->err ) ) { gen->stmt = NULL; return -ODBX_ERR_BACKEND; } } gen->stmt = NULL; if( strncasecmp( "BEGIN TRAN", query, 10 ) == 0 ) { return odbc_priv_setautocommit( gen, SQL_AUTOCOMMIT_OFF ); } else if( strncasecmp( "COMMIT", query, 6 ) == 0 ) { gen->err = SQLEndTran( SQL_HANDLE_DBC, gen->conn, SQL_COMMIT ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } return odbc_priv_setautocommit( gen, SQL_AUTOCOMMIT_ON ); } else if( strncasecmp( "ROLLBACK", query, 8 ) == 0 ) { gen->err = SQLEndTran( SQL_HANDLE_DBC, gen->conn, SQL_ROLLBACK ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } return odbc_priv_setautocommit( gen, SQL_AUTOCOMMIT_ON ); } else { gen->err = SQLAllocHandle( SQL_HANDLE_STMT, gen->conn, &(gen->stmt) ); if( !SQL_SUCCEEDED( gen->err ) ) { gen->stmt = NULL; return -ODBX_ERR_BACKEND; } gen->err = SQLExecDirect( gen->stmt, (SQLCHAR*) query, (SQLINTEGER) length ); if( !SQL_SUCCEEDED( gen->err ) && gen->err != SQL_NO_DATA ) { // don't free stmt handle as we need it for error reporting return -ODBX_ERR_BACKEND; } } return ODBX_ERR_SUCCESS; } static int odbc_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { struct odbcgen* gen = (struct odbcgen*) handle->generic; if( gen == NULL ) { return -ODBX_ERR_PARAM; } if( gen->stmt == NULL ) { return ODBX_RES_DONE; } // If called more often than necessary if( gen->resnum != 0 ) { switch( ( gen->err = SQLMoreResults( gen->stmt ) ) ) { case SQL_SUCCESS: case SQL_SUCCESS_WITH_INFO: break; case SQL_NO_DATA: gen->err = SQLFreeHandle( SQL_HANDLE_STMT, gen->stmt ); if( !SQL_SUCCEEDED( gen->err ) ) { gen->stmt = NULL; return -ODBX_ERR_BACKEND; } gen->stmt = NULL; return ODBX_RES_DONE; case SQL_STILL_EXECUTING: // TODO: How to handle this? default: return -ODBX_ERR_BACKEND; } } else { if( gen->err == SQL_NO_DATA ) { gen->resnum++; return ODBX_RES_NOROWS; // For PostgreSQL ODBC driver } } gen->resnum++; if( ( *result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } (*result)->generic = NULL; (*result)->aux = NULL; SQLSMALLINT cols; gen->err = SQLNumResultCols( gen->stmt, &cols ); // SQL_STILL_EXECUTING: // TODO: How to handle this? if( !SQL_SUCCEEDED( gen->err ) ) { free( *result ); *result = NULL; return -ODBX_ERR_BACKEND; } if( cols == 0 ) { return ODBX_RES_NOROWS; } if( ( (*result)->generic = malloc( cols * sizeof( struct odbcres ) ) ) == NULL ) { free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } memset( (*result)->generic, 0, cols * sizeof( struct odbcres ) ); if( ( (*result)->aux = malloc( cols * sizeof( struct odbcraux ) ) ) == NULL ) { free( (*result)->generic ); free( *result ); *result = NULL; return -ODBX_ERR_NOMEM; } SQLLEN attr; struct odbcres* res = (struct odbcres*) (*result)->generic; struct odbcraux* raux = (struct odbcraux*) (*result)->aux; raux->cols = cols; for( SQLSMALLINT i = 0; i < cols; i++ ) { gen->err = SQLColAttribute( gen->stmt, i+1, SQL_DESC_CONCISE_TYPE, NULL, 0, NULL, &attr ); if( !SQL_SUCCEEDED( gen->err ) ) { odbc_priv_cleanup( *result, i ); return -ODBX_ERR_BACKEND; } if( ( res[i].buflen = odbc_priv_collength( gen, i, attr ) ) < 0 ) { gen->err = res[i].buflen; odbc_priv_cleanup( *result, i ); return -ODBX_ERR_BACKEND; } if( ( res[i].buffer = (SQLPOINTER) malloc( res[i].buflen ) ) == NULL ) { odbc_priv_cleanup( *result, i ); return -ODBX_ERR_NOMEM; } gen->err = SQLBindCol( gen->stmt, i+1, SQL_C_CHAR, res[i].buffer, res[i].buflen, &(res[i].ind) ); if( !SQL_SUCCEEDED( gen->err ) ) { free( res[i].buffer ); odbc_priv_cleanup( *result, i ); return -ODBX_ERR_BACKEND; } } return ODBX_RES_ROWS; } static int odbc_odbx_result_finish( odbx_result_t* result ) { struct odbcraux* raux = (struct odbcraux*) result->aux; if( raux != NULL ) { odbc_priv_cleanup( result, raux->cols ); } else { free( result ); } return ODBX_ERR_SUCCESS; } static int odbc_odbx_row_fetch( odbx_result_t* result ) { struct odbcgen* gen = (struct odbcgen*) result->handle->generic; if( gen == NULL ) { return -ODBX_ERR_PARAM; } switch( ( gen->err = SQLFetch( ((struct odbcgen*) result->handle->generic)->stmt ) ) ) { case SQL_SUCCESS: return ODBX_ROW_NEXT; case SQL_NO_DATA: return ODBX_ROW_DONE; } return -ODBX_ERR_BACKEND; } static uint64_t odbc_odbx_rows_affected( odbx_result_t* result ) { SQLLEN count; struct odbcgen* gen = (struct odbcgen*) result->handle->generic; if( gen != NULL ) { gen->err = SQLRowCount( gen->stmt, &count ); if( SQL_SUCCEEDED( gen->err ) ) { if( count < 0 ) { count = 0; } // normalize if -1 (unknown) is returned return (uint64_t) count; } } return 0; } static unsigned long odbc_odbx_column_count( odbx_result_t* result ) { return (unsigned long) ((struct odbcraux*) result->aux)->cols; SQLSMALLINT cols; struct odbcgen* gen = (struct odbcgen*) result->handle->generic; if( gen != NULL ) { gen->err = SQLNumResultCols( gen->stmt, &cols ); if( SQL_SUCCEEDED( gen->err ) ) { return (unsigned long) cols; } } return 0; } static const char* odbc_odbx_column_name( odbx_result_t* result, unsigned long pos ) { SQLSMALLINT len; struct odbcraux* raux = (struct odbcraux*) result->aux; struct odbcgen* gen = (struct odbcgen*) result->handle->generic; if( gen != NULL ) { gen->err = SQLColAttribute( gen->stmt, (SQLUSMALLINT) pos+1, SQL_DESC_NAME, (SQLPOINTER) raux->colname, sizeof( raux->colname ), &len, NULL ); if( SQL_SUCCEEDED( gen->err ) ) { if( len >= sizeof( raux->colname ) ) { len = sizeof( raux->colname ) - 1; } raux->colname[len] = 0; return (const char*) raux->colname; } } return NULL; } static int odbc_odbx_column_type( odbx_result_t* result, unsigned long pos ) { SQLLEN type; struct odbcgen* gen = (struct odbcgen*) result->handle->generic; if( gen == NULL ) { return -ODBX_ERR_PARAM; } gen->err = SQLColAttribute( gen->stmt, pos+1, SQL_DESC_CONCISE_TYPE, NULL, 0, NULL, &type ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } switch( type ) { case SQL_BIT: return ODBX_TYPE_BOOLEAN; case SQL_SMALLINT: return ODBX_TYPE_SMALLINT; case SQL_INTEGER: return ODBX_TYPE_INTEGER; case SQL_BIGINT: return ODBX_TYPE_BIGINT; case SQL_DECIMAL: case SQL_NUMERIC: return ODBX_TYPE_DECIMAL; case SQL_REAL: return ODBX_TYPE_REAL; case SQL_DOUBLE: return ODBX_TYPE_DOUBLE; case SQL_FLOAT: return ODBX_TYPE_FLOAT; case SQL_CHAR: return ODBX_TYPE_CHAR; case SQL_VARCHAR: return ODBX_TYPE_VARCHAR; case SQL_LONGVARCHAR: return ODBX_TYPE_CLOB; case SQL_LONGVARBINARY: return ODBX_TYPE_BLOB; case SQL_TYPE_DATE: return ODBX_TYPE_DATE; case SQL_TYPE_TIME: return ODBX_TYPE_TIME; case SQL_TYPE_TIMESTAMP: return ODBX_TYPE_TIMESTAMP; } return ODBX_TYPE_UNKNOWN; } static unsigned long odbc_odbx_field_length( odbx_result_t* result, unsigned long pos ) { struct odbcres* res = (struct odbcres*) result->generic; struct odbcraux* raux = (struct odbcraux*) result->aux; if( res != NULL && raux != NULL && pos <= raux->cols ) { return res[pos].ind; } return 0; } static const char* odbc_odbx_field_value( odbx_result_t* result, unsigned long pos ) { struct odbcres* res = (struct odbcres*) result->generic; struct odbcraux* raux = (struct odbcraux*) result->aux; if( res != NULL && raux != NULL && pos <= raux->cols && res[pos].ind != SQL_NULL_DATA ) { return res[pos].buffer; } return NULL; } /* * ODBC private function */ static SQLLEN odbc_priv_collength( struct odbcgen* gen, SQLSMALLINT col, SQLSMALLINT type ) { switch( type ) { case SQL_SMALLINT: return 7; case SQL_INTEGER: return 12; case SQL_BIGINT: return 22; case SQL_DECIMAL: case SQL_NUMERIC: return 18; case SQL_REAL: return 42; case SQL_DOUBLE: case SQL_FLOAT: return 312; case SQL_DATE: case SQL_TYPE_DATE: return 11; case SQL_TIME: case SQL_TYPE_TIME: return 9; case SQL_TIMESTAMP: case SQL_TYPE_TIMESTAMP: return 24; } SQLLEN len = 0; gen->err = SQLColAttribute( gen->stmt, col+1, SQL_COLUMN_LENGTH, NULL, 0, NULL, &len ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } return len + 1; } static void odbc_priv_cleanup( odbx_result_t* result, SQLSMALLINT cols ) { if( result->generic != NULL ) { struct odbcres* res = (struct odbcres*) result->generic; for( SQLSMALLINT i = 0; i < cols; i++ ) { free( res[i].buffer ); } free( result->generic ); result->generic = NULL; } if( result->aux != NULL ) { free( result->aux ); result->aux = NULL; } free( result ); } static int odbc_priv_setautocommit( struct odbcgen* gen, SQLUINTEGER mode ) { gen->err = SQLSetConnectAttr( gen->conn, SQL_ATTR_AUTOCOMMIT, (SQLPOINTER) mode, SQL_IS_INTEGER ); if( !SQL_SUCCEEDED( gen->err ) ) { return -ODBX_ERR_BACKEND; } return ODBX_ERR_SUCCESS; } opendbx-1.4.6/backends/odbc/odbc_basic.h0000644000175000017500000000376411425153447015024 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2008 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "odbcbackend.h" #ifndef ODBC_BASIC_H #define ODBC_BASIC_H /* * Basic operations */ static int odbc_odbx_init( odbx_t* handle, const char* host, const char* port ); static int odbc_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int odbc_odbx_unbind( odbx_t* handle ); static int odbc_odbx_finish( odbx_t* handle ); static int odbc_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int odbc_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* odbc_odbx_error( odbx_t* handle ); static int odbc_odbx_error_type( odbx_t* handle ); static int odbc_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int odbc_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int odbc_odbx_result_finish( odbx_result_t* result ); static int odbc_odbx_row_fetch( odbx_result_t* result ); static uint64_t odbc_odbx_rows_affected( odbx_result_t* result ); static unsigned long odbc_odbx_column_count( odbx_result_t* result ); static const char* odbc_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int odbc_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long odbc_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* odbc_odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * Private ODBC support functions */ static SQLLEN odbc_priv_collength( struct odbcgen* gen, SQLSMALLINT col, SQLSMALLINT type ); static void odbc_priv_cleanup( odbx_result_t* result, SQLSMALLINT cols ); static int odbc_priv_setautocommit( struct odbcgen* gen, SQLUINTEGER mode ); #endif opendbx-1.4.6/backends/mysql/0000755000175000017500000000000011765214161013105 500000000000000opendbx-1.4.6/backends/mysql/Makefile.in0000644000175000017500000005154411765211301015074 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = backends/mysql DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(pkglibdir)" LTLIBRARIES = $(noinst_LTLIBRARIES) $(pkglib_LTLIBRARIES) libmysqlbackend_la_DEPENDENCIES = am_libmysqlbackend_la_OBJECTS = libmysqlbackend_la-mysqlbackend.lo \ libmysqlbackend_la-mysql_basic.lo libmysqlbackend_la_OBJECTS = $(am_libmysqlbackend_la_OBJECTS) libmysqlbackend_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(libmysqlbackend_la_LDFLAGS) $(LDFLAGS) -o $@ @SINGLELIB_FALSE@am_libmysqlbackend_la_rpath = -rpath $(pkglibdir) @SINGLELIB_TRUE@am_libmysqlbackend_la_rpath = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libmysqlbackend_la_SOURCES) DIST_SOURCES = $(libmysqlbackend_la_SOURCES) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AM_CPPFLAGS = -I../../lib @SINGLELIB_TRUE@noinst_LTLIBRARIES = libmysqlbackend.la @SINGLELIB_FALSE@libmysqlbackend_la_CPPFLAGS = \ @SINGLELIB_FALSE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_TRUE@libmysqlbackend_la_CPPFLAGS = -DODBX_SINGLELIB \ @SINGLELIB_TRUE@ -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) @SINGLELIB_FALSE@pkglib_LTLIBRARIES = libmysqlbackend.la @SINGLELIB_FALSE@libmysqlbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ libmysqlbackend_la_SOURCES = mysqlbackend.h mysqlbackend.c mysql_basic.h mysql_basic.c libmysqlbackend_la_LIBADD = -l@LIBMYSQL@ all: all-am .SUFFIXES: .SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu backends/mysql/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu backends/mysql/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done install-pkglibLTLIBRARIES: $(pkglib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(pkglibdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibdir)" @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(pkglibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(pkglibdir)"; \ } uninstall-pkglibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(pkglib_LTLIBRARIES)'; test -n "$(pkglibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ done clean-pkglibLTLIBRARIES: -test -z "$(pkglib_LTLIBRARIES)" || rm -f $(pkglib_LTLIBRARIES) @list='$(pkglib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libmysqlbackend.la: $(libmysqlbackend_la_OBJECTS) $(libmysqlbackend_la_DEPENDENCIES) $(libmysqlbackend_la_LINK) $(am_libmysqlbackend_la_rpath) $(libmysqlbackend_la_OBJECTS) $(libmysqlbackend_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libmysqlbackend_la-mysql_basic.Plo@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libmysqlbackend_la-mysqlbackend.Plo@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< libmysqlbackend_la-mysqlbackend.lo: mysqlbackend.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmysqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libmysqlbackend_la-mysqlbackend.lo -MD -MP -MF $(DEPDIR)/libmysqlbackend_la-mysqlbackend.Tpo -c -o libmysqlbackend_la-mysqlbackend.lo `test -f 'mysqlbackend.c' || echo '$(srcdir)/'`mysqlbackend.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libmysqlbackend_la-mysqlbackend.Tpo $(DEPDIR)/libmysqlbackend_la-mysqlbackend.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mysqlbackend.c' object='libmysqlbackend_la-mysqlbackend.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmysqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libmysqlbackend_la-mysqlbackend.lo `test -f 'mysqlbackend.c' || echo '$(srcdir)/'`mysqlbackend.c libmysqlbackend_la-mysql_basic.lo: mysql_basic.c @am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmysqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libmysqlbackend_la-mysql_basic.lo -MD -MP -MF $(DEPDIR)/libmysqlbackend_la-mysql_basic.Tpo -c -o libmysqlbackend_la-mysql_basic.lo `test -f 'mysql_basic.c' || echo '$(srcdir)/'`mysql_basic.c @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/libmysqlbackend_la-mysql_basic.Tpo $(DEPDIR)/libmysqlbackend_la-mysql_basic.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mysql_basic.c' object='libmysqlbackend_la-mysql_basic.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libmysqlbackend_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libmysqlbackend_la-mysql_basic.lo `test -f 'mysql_basic.c' || echo '$(srcdir)/'`mysql_basic.c mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LTLIBRARIES) installdirs: for dir in "$(DESTDIR)$(pkglibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \ clean-pkglibLTLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-pkglibLTLIBRARIES install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-pkglibLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-libtool clean-noinstLTLIBRARIES clean-pkglibLTLIBRARIES \ ctags distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkglibLTLIBRARIES install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags uninstall uninstall-am \ uninstall-pkglibLTLIBRARIES # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/backends/mysql/Makefile.am0000644000175000017500000000074511425153446015070 00000000000000AM_CPPFLAGS = -I../../lib if SINGLELIB noinst_LTLIBRARIES = libmysqlbackend.la libmysqlbackend_la_CPPFLAGS = -DODBX_SINGLELIB else pkglib_LTLIBRARIES = libmysqlbackend.la libmysqlbackend_la_CPPFLAGS = libmysqlbackend_la_LDFLAGS = -no-undefined -module -version-info @APIVERSION@ endif libmysqlbackend_la_SOURCES = mysqlbackend.h mysqlbackend.c mysql_basic.h mysql_basic.c libmysqlbackend_la_CPPFLAGS += -DAPINUMBER=@APINUMBER@ $(AM_CPPFLAGS) libmysqlbackend_la_LIBADD = -l@LIBMYSQL@ opendbx-1.4.6/backends/mysql/mysqlbackend.h0000644000175000017500000000255311425153446015661 00000000000000/* * MySQL driver for OpenDBX * Copyright (C) 2004-2006 Norbert Sendetzky * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA. */ #include "odbxdrv.h" #ifdef HAVE_WINDOWS_H #include #endif #include #ifndef MYSQLBACKEND_H #define MYSQLBACKEND_H /* MySQL 5.0.24 bug workaround */ #ifndef ulong # define ulong unsigned long #endif /* * Auxillary data structures attached to odbx_t and odbx_result_t */ struct myconn { char* host; unsigned int port; ulong flags; char* mode; int tls; int first; }; struct myres { MYSQL_ROW row; MYSQL_FIELD* fields; unsigned long* lengths; unsigned long columns; }; #endif opendbx-1.4.6/backends/mysql/mysqlbackend.c0000644000175000017500000000111111425153446015641 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "mysqlbackend.h" /* * Declaration of MySQL capabilities */ extern struct odbx_basic_ops mysql_odbx_basic_ops; struct odbx_ops mysql_odbx_ops = { .basic = &mysql_odbx_basic_ops, .lo = NULL, }; #ifndef ODBX_SINGLELIB void odbxdrv_register( struct odbx_ops** ops ) { *ops = &mysql_odbx_ops; } #endif opendbx-1.4.6/backends/mysql/mysql_basic.h0000644000175000017500000000371711425153446015515 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "mysqlbackend.h" #ifndef MYSQL_BASIC_H #define MYSQL_BASIC_H /* * Basic operations */ static int mysql_odbx_init( odbx_t* handle, const char* host, const char* port ); static int mysql_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ); static int mysql_odbx_unbind( odbx_t* handle ); static int mysql_odbx_finish( odbx_t* handle ); static int mysql_odbx_get_option( odbx_t* handle, unsigned int option, void* value ); static int mysql_odbx_set_option( odbx_t* handle, unsigned int option, void* value ); static const char* mysql_odbx_error( odbx_t* handle ); static int mysql_odbx_error_type( odbx_t* handle ); static int mysql_odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ); static int mysql_odbx_query( odbx_t* handle, const char* query, unsigned long length ); static int mysql_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ); static int mysql_odbx_result_finish( odbx_result_t* result ); static int mysql_odbx_row_fetch( odbx_result_t* result ); static uint64_t mysql_odbx_rows_affected( odbx_result_t* result ); static unsigned long mysql_odbx_column_count( odbx_result_t* result ); static const char* mysql_odbx_column_name( odbx_result_t* result, unsigned long pos ); static int mysql_odbx_column_type( odbx_result_t* result, unsigned long pos ); static unsigned long mysql_odbx_field_length( odbx_result_t* result, unsigned long pos ); static const char* mysql_odbx_field_value( odbx_result_t* result, unsigned long pos ); /* * MySQL private functions */ static int mysql_priv_setmode( odbx_t* handle, const char* mode ); #endif opendbx-1.4.6/backends/mysql/mysql_basic.c0000644000175000017500000003266111425153446015510 00000000000000/* * OpenDBX - A simple but extensible database abstraction layer * Copyright (C) 2004-2007 Norbert Sendetzky and others * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "mysql_basic.h" #include #include #include /* * Declaration of MySQL capabilities */ struct odbx_basic_ops mysql_odbx_basic_ops = { .init = mysql_odbx_init, .bind = mysql_odbx_bind, .unbind = mysql_odbx_unbind, .finish = mysql_odbx_finish, .get_option = mysql_odbx_get_option, .set_option = mysql_odbx_set_option, .error = mysql_odbx_error, .error_type = mysql_odbx_error_type, .escape = mysql_odbx_escape, .query = mysql_odbx_query, .result = mysql_odbx_result, .result_finish = mysql_odbx_result_finish, .rows_affected = mysql_odbx_rows_affected, .row_fetch = mysql_odbx_row_fetch, .column_count = mysql_odbx_column_count, .column_name = mysql_odbx_column_name, .column_type = mysql_odbx_column_type, .field_length = mysql_odbx_field_length, .field_value = mysql_odbx_field_value, }; static int mysql_counter = 0; /* * ODBX basic operations * MySQL style */ static int mysql_odbx_init( odbx_t* handle, const char* host, const char* port ) { char* tmp = NULL; unsigned int portnum = 0; if( port != NULL ) { portnum = (unsigned int) strtoul( port, &tmp, 10 ); if( tmp[0] != '\0' ) { return -ODBX_ERR_PARAM; } } if( ( handle->generic = malloc( sizeof( MYSQL ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } if( ( handle->aux = malloc( sizeof( struct myconn ) ) ) == NULL ) { free( handle->generic ); handle->generic = NULL; return -ODBX_ERR_NOMEM; } struct myconn* aux = (struct myconn*) handle->aux; aux->port = portnum; aux->host = NULL; aux->mode = NULL; aux->flags = 0; aux->tls = 0; aux->flags |= CLIENT_REMEMBER_OPTIONS; // remember options between mysql_real_connect() calls aux->flags |= CLIENT_FOUND_ROWS; // return the number of found rows, not the number of changed rows if( host != NULL ) { size_t hlen = strlen( host ) + 1; if( ( aux->host = malloc( hlen ) ) == NULL ) { free( handle->generic ); free( handle->aux ); handle->generic = NULL; handle->aux = NULL; return -ODBX_ERR_NOMEM; } memcpy( aux->host, host, hlen ); } return ODBX_ERR_SUCCESS; } static int mysql_odbx_bind( odbx_t* handle, const char* database, const char* who, const char* cred, int method ) { struct myconn* param = (struct myconn*) handle->aux; if( handle->generic == NULL || param == NULL ) { return -ODBX_ERR_PARAM; } if( method != ODBX_BIND_SIMPLE ) { return -ODBX_ERR_NOTSUP; } if( mysql_init( (MYSQL*) handle->generic ) == NULL ) { return -ODBX_ERR_NOMEM; } mysql_counter++; if( mysql_options( (MYSQL*) handle->generic, MYSQL_READ_DEFAULT_GROUP, "client" ) != 0 ) { mysql_close( (MYSQL*) handle->generic ); return -ODBX_ERR_BACKEND; } int err; char *host = NULL, *socket = NULL; if( param->host != NULL && param->host[0] != '/' ) { host = param->host; } else { socket = param->host; } switch( param->tls ) { case ODBX_TLS_TRY: param->flags |= CLIENT_SSL; if( mysql_real_connect( (MYSQL*) handle->generic, host, who, cred, database, param->port, socket, param->flags ) != NULL ) { goto SUCCESS; } param->flags &= ~CLIENT_SSL; break; case ODBX_TLS_ALWAYS: param->flags |= CLIENT_SSL; break; default: param->flags &= ~CLIENT_SSL; } if( mysql_real_connect( (MYSQL*) handle->generic, host, who, cred, database, param->port, socket, param->flags ) == NULL ) { mysql_close( (MYSQL*) handle->generic ); return -ODBX_ERR_BACKEND; } SUCCESS: if( ( err = mysql_priv_setmode( handle, param->mode ) ) != ODBX_ERR_SUCCESS ) { mysql_close( (MYSQL*) handle->generic ); } return err; } static int mysql_odbx_unbind( odbx_t* handle ) { if( handle->generic != NULL ) { mysql_close( (MYSQL*) handle->generic ); return ODBX_ERR_SUCCESS; } return -ODBX_ERR_PARAM; } static int mysql_odbx_finish( odbx_t* handle ) { struct myconn* aux = (struct myconn*) handle->aux; if( aux != NULL ) { if( aux->host != NULL ) { free( aux->host ); aux->host = NULL; } free( handle->aux ); handle->aux = NULL; } if( handle->generic != NULL ) { free( handle->generic ); handle->generic = NULL; } if( --mysql_counter == 0 ) { mysql_thread_end(); mysql_server_end(); } return ODBX_ERR_SUCCESS; } static int mysql_odbx_get_option( odbx_t* handle, unsigned int option, void* value ) { switch( option ) { case ODBX_OPT_API_VERSION: *(int*) value = APINUMBER; break; case ODBX_OPT_THREAD_SAFE: *((int*) value) = (int) mysql_thread_safe(); break; case ODBX_OPT_MULTI_STATEMENTS: #ifdef HAVE_MYSQL_NEXT_RESULT *((int*) value) = ODBX_ENABLE; #else *((int*) value) = ODBX_DISABLE; #endif break; case ODBX_OPT_PAGED_RESULTS: case ODBX_OPT_TLS: // FIXME: Howto find out if compiled with SSL support case ODBX_OPT_COMPRESS: case ODBX_OPT_MODE: case ODBX_OPT_CONNECT_TIMEOUT: *((int*) value) = ODBX_ENABLE; break; default: return -ODBX_ERR_OPTION; } return ODBX_ERR_SUCCESS; } static int mysql_odbx_set_option( odbx_t* handle, unsigned int option, void* value ) { struct myconn* aux = (struct myconn*) handle->aux; if( handle->generic == NULL || aux == NULL ) { return -ODBX_ERR_PARAM; } switch( option ) { case ODBX_OPT_API_VERSION: case ODBX_OPT_THREAD_SAFE: return -ODBX_ERR_OPTRO; case ODBX_OPT_TLS: aux->tls = *((int*) value); return ODBX_ERR_SUCCESS; case ODBX_OPT_MULTI_STATEMENTS: #ifdef HAVE_MYSQL_NEXT_RESULT if( *((int*) value) == ODBX_ENABLE ) { aux->flags |= CLIENT_MULTI_STATEMENTS; return ODBX_ERR_SUCCESS; } if( *((int*) value) == ODBX_DISABLE ) { aux->flags &= ~CLIENT_MULTI_STATEMENTS; return ODBX_ERR_SUCCESS; } #endif break; case ODBX_OPT_PAGED_RESULTS: return -ODBX_ERR_SUCCESS; case ODBX_OPT_COMPRESS: if( *((int*) value) == ODBX_ENABLE ) { aux->flags |= CLIENT_COMPRESS; return ODBX_ERR_SUCCESS; } if( *((int*) value) == ODBX_DISABLE ) { aux->flags &= ~CLIENT_COMPRESS; return ODBX_ERR_SUCCESS; } return -ODBX_ERR_OPTWR; case ODBX_OPT_MODE: aux->mode = realloc( aux->mode, strlen( value ) + 1 ); memcpy( aux->mode, value, strlen( value ) + 1 ); return ODBX_ERR_SUCCESS; case ODBX_OPT_CONNECT_TIMEOUT: if( !mysql_options( (MYSQL*) handle->generic, MYSQL_OPT_CONNECT_TIMEOUT, (char*) value ) ) { return ODBX_ERR_SUCCESS; } return -ODBX_ERR_OPTWR; default: return -ODBX_ERR_OPTION; } return -ODBX_ERR_OPTWR; } static const char* mysql_odbx_error( odbx_t* handle ) { return mysql_error( (MYSQL*) handle->generic ); } /* * Server errors (1000-1999): non-fatal * Client errors (2000-2999): fatal * * This might be some kind of oversimplification * but should be correct in most cases. */ static int mysql_odbx_error_type( odbx_t* handle ) { unsigned int err = mysql_errno( (MYSQL*) handle->generic ); if( !err ) { return 0; } if( err >= 1000 && err < 2000 ) { return 1; } return -1; } static int mysql_odbx_escape( odbx_t* handle, const char* from, unsigned long fromlen, char* to, unsigned long* tolen ) { if( handle->generic == NULL ) { return -ODBX_ERR_PARAM; } if( *tolen < fromlen * 2 + 1 ) { return -ODBX_ERR_SIZE; } *tolen = mysql_real_escape_string( (MYSQL*) handle->generic, to, from, fromlen ); return ODBX_ERR_SUCCESS; } static int mysql_odbx_query( odbx_t* handle, const char* query, unsigned long length ) { if( handle->generic == NULL || handle->aux == NULL ) { return -ODBX_ERR_PARAM; } if( mysql_real_query( (MYSQL*) handle->generic, query, length ) != 0 ) { return -ODBX_ERR_BACKEND; } ((struct myconn*) handle->aux)->first = 1; return ODBX_ERR_SUCCESS; } static int mysql_odbx_result( odbx_t* handle, odbx_result_t** result, struct timeval* timeout, unsigned long chunk ) { MYSQL* conn = (MYSQL*) handle->generic; struct myconn* aux = (struct myconn*) handle->aux; if( conn == NULL || aux == NULL ) { return -ODBX_ERR_PARAM; } if( aux->first == 0 ) { #ifdef HAVE_MYSQL_NEXT_RESULT switch( mysql_next_result( conn ) ) { case -1: return ODBX_RES_DONE; // no more results case 0: break; default: return -ODBX_ERR_BACKEND; } #else return ODBX_RES_DONE; // no more results #endif } aux->first = 0; if( ( *result = (odbx_result_t*) malloc( sizeof( odbx_result_t ) ) ) == NULL ) { return -ODBX_ERR_NOMEM; } odbx_result_t* res = *result; res->generic = NULL; if( ( res->aux = malloc( sizeof( struct myres ) ) ) == NULL ) { free( res ); *result = NULL; return -ODBX_ERR_NOMEM; } struct myres* maux = (struct myres*) res->aux; if( ( maux->columns = (unsigned long) mysql_field_count( conn ) ) == 0 ) { return ODBX_RES_NOROWS; // empty or not SELECT like query } if( chunk == 0 ) { if( ( res->generic = (void*) mysql_store_result( conn ) ) == NULL ) { free( res->aux ); res->aux = NULL; free( res ); *result = NULL; return -ODBX_ERR_BACKEND; } } else { if( ( res->generic = (void*) mysql_use_result( conn ) ) == NULL ) { free( res->aux ); res->aux = NULL; free( res ); *result = NULL; return -ODBX_ERR_BACKEND; } } maux->fields = mysql_fetch_fields( (MYSQL_RES*) res->generic ); return ODBX_RES_ROWS; // result is available } static int mysql_odbx_result_finish( odbx_result_t* result ) { if( result->generic != NULL ) { mysql_free_result( (MYSQL_RES*) result->generic ); result->generic = NULL; } if( result->aux != NULL ) { free( result->aux ); result->aux = NULL; } free( result ); return ODBX_ERR_SUCCESS; } static int mysql_odbx_row_fetch( odbx_result_t* result ) { MYSQL_RES* res = (MYSQL_RES*) result->generic; struct myres* aux = (struct myres*) result->aux; if( res == NULL || aux == NULL ) { return -ODBX_ERR_PARAM; } if( ( aux->row = mysql_fetch_row( res ) ) == NULL ) { aux->lengths = NULL; return ODBX_ROW_DONE; } aux->lengths = mysql_fetch_lengths( res ); return ODBX_ROW_NEXT; } static uint64_t mysql_odbx_rows_affected( odbx_result_t* result ) { my_ulonglong res; if( result->handle != NULL ) { if( ( res = mysql_affected_rows( (MYSQL*) result->handle->generic ) ) != (my_ulonglong) -1 ) { return (uint64_t) res; } } return 0; // error } static unsigned long mysql_odbx_column_count( odbx_result_t* result ) { if( result->aux != NULL ) { return ((struct myres*) result->aux)->columns; } return 0; } static const char* mysql_odbx_column_name( odbx_result_t* result, unsigned long pos ) { struct myres* aux = (struct myres*) result->aux; if( aux != NULL && aux->fields != NULL && pos < aux->columns ) { return (const char*) aux->fields[pos].name; } return NULL; } static int mysql_odbx_column_type( odbx_result_t* result, unsigned long pos ) { struct myres* aux = (struct myres*) result->aux; if( aux != NULL && aux->fields != NULL && pos < aux->columns ) { switch( aux->fields[pos].type ) { case FIELD_TYPE_SHORT: return ODBX_TYPE_SMALLINT; case FIELD_TYPE_LONG: return ODBX_TYPE_INTEGER; case FIELD_TYPE_LONGLONG: return ODBX_TYPE_BIGINT; #ifdef FIELD_TYPE_NEWDECIMAL case FIELD_TYPE_NEWDECIMAL: #endif case FIELD_TYPE_DECIMAL: return ODBX_TYPE_DECIMAL; case FIELD_TYPE_FLOAT: return ODBX_TYPE_REAL; case FIELD_TYPE_DOUBLE: return ODBX_TYPE_DOUBLE; case FIELD_TYPE_STRING: return ODBX_TYPE_CHAR; case FIELD_TYPE_VAR_STRING: return ODBX_TYPE_VARCHAR; case FIELD_TYPE_TINY_BLOB: case FIELD_TYPE_MEDIUM_BLOB: case FIELD_TYPE_BLOB: case FIELD_TYPE_LONG_BLOB: if( aux->fields[pos].flags & BINARY_FLAG ) { return ODBX_TYPE_BLOB; } else { return ODBX_TYPE_CLOB; } case FIELD_TYPE_TIME: return ODBX_TYPE_TIME; case FIELD_TYPE_DATETIME: return ODBX_TYPE_TIMESTAMP; case FIELD_TYPE_DATE: return ODBX_TYPE_DATE; default: return ODBX_TYPE_UNKNOWN; } } return -ODBX_ERR_PARAM; } static unsigned long mysql_odbx_field_length( odbx_result_t* result, unsigned long pos ) { struct myres* aux = (struct myres*) result->aux; if( aux != NULL && aux->lengths != NULL && pos < aux->columns ) { return aux->lengths[pos]; } return 0; } static const char* mysql_odbx_field_value( odbx_result_t* result, unsigned long pos ) { struct myres* aux = (struct myres*) result->aux; if( aux != NULL && aux->row != NULL && pos < aux->columns ) { return (const char*) aux->row[pos]; } return NULL; } /* * MySQL private functions */ static int mysql_priv_setmode( odbx_t* handle, const char* mode ) { char* stmt; char* lmode = "ANSI"; size_t modelen = 4; size_t len = 24; if( mode != NULL ) { // For MySQL < 4.1 when explicitly set if( strlen( mode ) == 0 ) { return ODBX_ERR_SUCCESS; } modelen = strlen( mode ); lmode = (char*) mode; } if( ( stmt = (char*) malloc( len + modelen ) ) == NULL ) { return -ODBX_ERR_NOMEM; } memcpy( stmt, "SET SESSION sql_mode='", 22 ); memcpy( stmt + 22, lmode, modelen ); memcpy( stmt + 22 + modelen, "'", 2 ); if( mysql_real_query( (MYSQL*) handle->generic, stmt, len + modelen ) != 0 ) { return -ODBX_ERR_BACKEND; } if( mysql_field_count( (MYSQL*) handle->generic ) != 0 ) { MYSQL_RES* result; if( ( result = mysql_store_result( (MYSQL*) handle->generic ) ) == NULL ) { return -ODBX_ERR_BACKEND; } mysql_free_result( result ); } free( stmt ); return ODBX_ERR_SUCCESS; } opendbx-1.4.6/install-sh0000755000175000017500000003253711425153450012120 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: opendbx-1.4.6/utils/0000755000175000017500000000000011765214162011327 500000000000000opendbx-1.4.6/utils/po/0000755000175000017500000000000011765214162011745 500000000000000opendbx-1.4.6/utils/po/stamp-po0000644000175000017500000000001211765214162013341 00000000000000timestamp opendbx-1.4.6/utils/po/de.gmo0000644000175000017500000000475611765214162012775 00000000000000Þ•Ü%œ01EMm;v ²%½$ã'50 f#p ”4¡Ö2ç*EU"r,•Â%ßjp…3ŽÂaÒ 4/?$o6”OË *%P7a™6¬*ã # ,@ 1m #Ÿ *à     Available commands:Error: Error: Caught unknown exceptionGood byeInteractive SQL shell, use .help to list available commandsPassword: Printing column names is now disabledPrinting column names is now enabledSQL keyword file for command completionUnknown command, use .help to list available commandsWarning: database name or database file nameexit programhost name, IP address or path to the database serverinteractive modename of the backend or path to the backend libraryport name or number of the database serverprint this helpread configuration from fileseparator between fields in outputtoggle printing column names for result setsuser name for authenticationwith prompt asking for the passphraseProject-Id-Version: opendbx 1.3.7 Report-Msgid-Bugs-To: norbert@linuxnetworks.de POT-Creation-Date: 2012-06-10 23:58+0200 PO-Revision-Date: 2008-04-04 00:18+0200 Last-Translator: Language-Team: German MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=(n != 1); Verfügbare Befehle:Fehler: Fehler: Es ist eine unbekannte Ausnahme aufgetretenAuf WiedersehenInteraktive SQL Eingabeaufforderung. Geben Sie .help für eine Liste der verfügbaren Befehle einPasswort: Spaltennamen werden jetzt nicht mehr ausgegebenSpaltennamen werden jetzt ausgegebenSQL Schlüsselwortdatei für BefehlsvervollständigungUnbekannter Befehl. Benutzen Sie .help für eine Liste der verfügbaren BefehleWarnung: Datenbankname oder Dateiname der DatenbankProgramm beendenName, Adresse oder Verzeichnispfad des DatenbankserversInteraktiver ModusTreibername oder Verzeichnispfad zur TreiberbibliothekPortname oder -nummer des DatenbankserversDiese Hilfe ausgebenName der KonfigurationsdateiTrennzeichen zwischen Feldern in der AusgabeSpaltennamen für Ergebnislisten ein-/ausschaltenBenutzername für AuthentifizierungEingabeaufforderung für Passwort anzeigenopendbx-1.4.6/utils/po/POTFILES.in0000644000175000017500000000014211425153450013432 00000000000000# List of source files which contain translatable strings. utils/commands.cpp utils/odbx-sql.cpp opendbx-1.4.6/utils/po/en@quot.gmo0000644000175000017500000000462611765214162014014 00000000000000Þ•ä%¬@AU]};† Â%Í$ó'5@ v#€ ¤4±æ2÷**Ue"‚#¥,Éö%d9ž²ºÚ;ã %*$P'u5 Ó#Ý 4C2T*‡²Â"ß# ,& S %p     Available commands:Error: Error: Caught unknown exceptionGood byeInteractive SQL shell, use .help to list available commandsPassword: Printing column names is now disabledPrinting column names is now enabledSQL keyword file for command completionUnknown command, use .help to list available commandsWarning: database name or database file nameexit programhost name, IP address or path to the database serverinteractive modename of the backend or path to the backend libraryport name or number of the database serverprint this helpread configuration from fileseparator between fields in outputstart/end field delimiter in outputtoggle printing column names for result setsuser name for authenticationwith prompt asking for the passphraseProject-Id-Version: opendbx 1.4.6 Report-Msgid-Bugs-To: norbert@linuxnetworks.de POT-Creation-Date: 2012-06-10 23:58+0200 PO-Revision-Date: 2012-06-10 23:58+0200 Last-Translator: Automatically generated Language-Team: none MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=(n != 1); Available commands:Error: Error: Caught unknown exceptionGood byeInteractive SQL shell, use .help to list available commandsPassword: Printing column names is now disabledPrinting column names is now enabledSQL keyword file for command completionUnknown command, use .help to list available commandsWarning: database name or database file nameexit programhost name, IP address or path to the database serverinteractive modename of the backend or path to the backend libraryport name or number of the database serverprint this helpread configuration from fileseparator between fields in outputstart/end field delimiter in outputtoggle printing column names for result setsuser name for authenticationwith prompt asking for the passphraseopendbx-1.4.6/utils/po/Makevars0000644000175000017500000000346411425153450013363 00000000000000# Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = opendbx-utils # These two variables depend on the location of this directory. subdir = utils/po top_builddir = ../.. # These options get passed to xgettext. #XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Free Software Foundation, Inc. # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = norbert@linuxnetworks.de # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = opendbx-1.4.6/utils/po/boldquot.sed0000644000175000017500000000033111425153450014203 00000000000000s/"\([^"]*\)"/“\1â€/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“â€/""/g s/“/“/g s/â€/â€/g s/‘/‘/g s/’/’/g opendbx-1.4.6/utils/po/quot.sed0000644000175000017500000000023111425153450013341 00000000000000s/"\([^"]*\)"/“\1â€/g s/`\([^`']*\)'/‘\1’/g s/ '\([^`']*\)' / ‘\1’ /g s/ '\([^`']*\)'$/ ‘\1’/g s/^'\([^`']*\)' /‘\1’ /g s/“â€/""/g opendbx-1.4.6/utils/po/insert-header.sin0000644000175000017500000000124011425153450015122 00000000000000# Sed script that inserts the file called HEADER before the header entry. # # At each occurrence of a line starting with "msgid ", we execute the following # commands. At the first occurrence, insert the file. At the following # occurrences, do nothing. The distinction between the first and the following # occurrences is achieved by looking at the hold space. /^msgid /{ x # Test if the hold space is empty. s/m/m/ ta # Yes it was empty. First occurrence. Read the file. r HEADER # Output the file's contents by reading the next line. But don't lose the # current line while doing this. g N bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } opendbx-1.4.6/utils/po/ChangeLog0000644000175000017500000000066411425153450013440 000000000000002008-04-03 gettextize * Makefile.in.in: New file, from gettext-0.17. * boldquot.sed: New file, from gettext-0.17. * en@boldquot.header: New file, from gettext-0.17. * en@quot.header: New file, from gettext-0.17. * insert-header.sin: New file, from gettext-0.17. * quot.sed: New file, from gettext-0.17. * remove-potcdate.sin: New file, from gettext-0.17. * Rules-quot: New file, from gettext-0.17. opendbx-1.4.6/utils/po/Makefile.in.in0000644000175000017500000003552411425153450014343 00000000000000# Makefile for PO directory in any package using GNU gettext. # Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU General Public # License but which still want to provide support for the GNU gettext # functionality. # Please note that the actual code of GNU gettext is covered by the GNU # General Public License and is *not* in the public domain. # # Origin: gettext-0.17 GETTEXT_MACRO_VERSION = 0.17 PACKAGE = @PACKAGE@ VERSION = @VERSION@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ SHELL = /bin/sh @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ datarootdir = @datarootdir@ datadir = @datadir@ localedir = @localedir@ gettextsrcdir = $(datadir)/gettext/po INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ # We use $(mkdir_p). # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, # @install_sh@ does not start with $(SHELL), so we add it. # In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake # versions, $(mkinstalldirs) and $(install_sh) are unused. mkinstalldirs = $(SHELL) @install_sh@ -d install_sh = $(SHELL) @install_sh@ MKDIR_P = @MKDIR_P@ mkdir_p = @mkdir_p@ GMSGFMT_ = @GMSGFMT@ GMSGFMT_no = @GMSGFMT@ GMSGFMT_yes = @GMSGFMT_015@ GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) MSGFMT_ = @MSGFMT@ MSGFMT_no = @MSGFMT@ MSGFMT_yes = @MSGFMT_015@ MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) XGETTEXT_ = @XGETTEXT@ XGETTEXT_no = @XGETTEXT@ XGETTEXT_yes = @XGETTEXT_015@ XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) MSGMERGE = msgmerge MSGMERGE_UPDATE = @MSGMERGE@ --update MSGINIT = msginit MSGCONV = msgconv MSGFILTER = msgfilter POFILES = @POFILES@ GMOFILES = @GMOFILES@ UPDATEPOFILES = @UPDATEPOFILES@ DUMMYPOFILES = @DUMMYPOFILES@ DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) POTFILES = \ CATALOGS = @CATALOGS@ # Makevars gets inserted here. (Don't remove this line!) .SUFFIXES: .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ mv t-$@ $@ all: check-macro-version all-@USE_NLS@ all-yes: stamp-po all-no: # Ensure that the gettext macros and this Makefile.in.in are in sync. check-macro-version: @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ exit 1; \ } # $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no # internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because # we don't want to bother translators with empty POT files). We assume that # LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. # In this case, stamp-po is a nop (i.e. a phony target). # stamp-po is a timestamp denoting the last time at which the CATALOGS have # been loosely updated. Its purpose is that when a developer or translator # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent # invocations of "make" will do nothing. This timestamp would not be necessary # if updating the $(CATALOGS) would always touch them; however, the rule for # $(POFILES) has been designed to not touch files that don't need to be # changed. stamp-po: $(srcdir)/$(DOMAIN).pot test ! -f $(srcdir)/$(DOMAIN).pot || \ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) @test ! -f $(srcdir)/$(DOMAIN).pot || { \ echo "touch stamp-po" && \ echo timestamp > stamp-poT && \ mv stamp-poT stamp-po; \ } # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. # This target rebuilds $(DOMAIN).pot; it is an expensive operation. # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ package_gnu='GNU '; \ else \ package_gnu=''; \ fi; \ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ else \ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ fi; \ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ *) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --package-name="$${package_gnu}@PACKAGE@" \ --package-version='@VERSION@' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ esac test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ else \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ else \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ } # This rule has no dependencies: we don't need to update $(DOMAIN).pot at # every "make" invocation, only create it when it is missing. # Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update # This target rebuilds a PO file if $(DOMAIN).pot has changed. # Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(srcdir)/$(DOMAIN).pot @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ if test -f "$(srcdir)/$${lang}.po"; then \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \ else \ $(MAKE) $${lang}.po-create; \ fi install: install-exec install-data install-exec: install-data: install-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all $(mkdir_p) $(DESTDIR)$(datadir) @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ fi; \ done; \ done install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi installdirs-data-no: installdirs-data-yes: $(mkdir_p) $(DESTDIR)$(datadir) @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ fi; \ done; \ done # Define this as empty until I found a useful application. installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-@USE_NLS@ if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi uninstall-data-no: uninstall-data-yes: catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ done; \ done check: all info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: rm -f remove-potcdate.sed rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES *.mo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(MAKE) update-po @$(MAKE) dist2 # This is a separate target because 'update-po' must be executed before. dist2: stamp-po $(DISTFILES) dists="$(DISTFILES)"; \ if test "$(PACKAGE)" = "gettext-tools"; then \ dists="$$dists Makevars.template"; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ dists="$$dists $(DOMAIN).pot stamp-po"; \ fi; \ if test -f $(srcdir)/ChangeLog; then \ dists="$$dists ChangeLog"; \ fi; \ for i in 0 1 2 3 4 5 6 7 8 9; do \ if test -f $(srcdir)/ChangeLog.$$i; then \ dists="$$dists ChangeLog.$$i"; \ fi; \ done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ cp -p $$file $(distdir) || exit 1; \ else \ cp -p $(srcdir)/$$file $(distdir) || exit 1; \ fi; \ done update-po: Makefile $(MAKE) $(DOMAIN).pot-update test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo # General rule for creating PO files. .nop.po-create: @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ exit 1 # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ cd $(top_builddir) \ && $(SHELL) ./config.status $(subdir)/$@.in po-directories force: # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/utils/po/opendbx-utils.pot0000644000175000017500000000461411765214162015213 00000000000000# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: opendbx 1.4.6\n" "Report-Msgid-Bugs-To: norbert@linuxnetworks.de\n" "POT-Creation-Date: 2012-06-10 23:58+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: utils/commands.cpp:31 msgid "Unknown command, use .help to list available commands" msgstr "" #: utils/commands.cpp:42 msgid "Printing column names is now enabled" msgstr "" #: utils/commands.cpp:45 msgid "Printing column names is now disabled" msgstr "" #: utils/commands.cpp:54 msgid "Available commands:" msgstr "" #: utils/commands.cpp:55 msgid "toggle printing column names for result sets" msgstr "" #: utils/commands.cpp:56 utils/odbx-sql.cpp:194 msgid "print this help" msgstr "" #: utils/commands.cpp:57 msgid "exit program" msgstr "" #: utils/commands.cpp:64 msgid "Good bye" msgstr "" #: utils/odbx-sql.cpp:128 msgid "Interactive SQL shell, use .help to list available commands" msgstr "" #: utils/odbx-sql.cpp:169 msgid "Warning: " msgstr "" #: utils/odbx-sql.cpp:195 msgid "name of the backend or path to the backend library" msgstr "" #: utils/odbx-sql.cpp:196 msgid "read configuration from file" msgstr "" #: utils/odbx-sql.cpp:197 msgid "database name or database file name" msgstr "" #: utils/odbx-sql.cpp:198 msgid "start/end field delimiter in output" msgstr "" #: utils/odbx-sql.cpp:199 msgid "host name, IP address or path to the database server" msgstr "" #: utils/odbx-sql.cpp:200 msgid "interactive mode" msgstr "" #: utils/odbx-sql.cpp:201 msgid "SQL keyword file for command completion" msgstr "" #: utils/odbx-sql.cpp:202 msgid "port name or number of the database server" msgstr "" #: utils/odbx-sql.cpp:203 msgid "separator between fields in output" msgstr "" #: utils/odbx-sql.cpp:204 msgid "user name for authentication" msgstr "" #: utils/odbx-sql.cpp:205 msgid "with prompt asking for the passphrase" msgstr "" #: utils/odbx-sql.cpp:218 msgid "Password: " msgstr "" #: utils/odbx-sql.cpp:245 msgid "Error: " msgstr "" #: utils/odbx-sql.cpp:250 msgid "Error: Caught unknown exception" msgstr "" opendbx-1.4.6/utils/po/en@quot.header0000644000175000017500000000226311425153450014450 00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # opendbx-1.4.6/utils/po/remove-potcdate.sin0000644000175000017500000000066011425153450015473 00000000000000# Sed script that remove the POT-Creation-Date line in the header entry # from a POT file. # # The distinction between the first and the following occurrences of the # pattern is achieved by looking at the hold space. /^"POT-Creation-Date: .*"$/{ x # Test if the hold space is empty. s/P/P/ ta # Yes it was empty. First occurrence. Remove the line. g d bb :a # The hold space was nonempty. Following occurrences. Do nothing. x :b } opendbx-1.4.6/utils/po/en@quot.po0000644000175000017500000001047611765214162013650 00000000000000# English translations for opendbx package. # Copyright (C) 2012 Free Software Foundation, Inc. # This file is distributed under the same license as the opendbx package. # Automatically generated, 2012. # # All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # msgid "" msgstr "" "Project-Id-Version: opendbx 1.4.6\n" "Report-Msgid-Bugs-To: norbert@linuxnetworks.de\n" "POT-Creation-Date: 2012-06-10 23:58+0200\n" "PO-Revision-Date: 2012-06-10 23:58+0200\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: utils/commands.cpp:31 msgid "Unknown command, use .help to list available commands" msgstr "Unknown command, use .help to list available commands" #: utils/commands.cpp:42 msgid "Printing column names is now enabled" msgstr "Printing column names is now enabled" #: utils/commands.cpp:45 msgid "Printing column names is now disabled" msgstr "Printing column names is now disabled" #: utils/commands.cpp:54 msgid "Available commands:" msgstr "Available commands:" #: utils/commands.cpp:55 msgid "toggle printing column names for result sets" msgstr "toggle printing column names for result sets" #: utils/commands.cpp:56 utils/odbx-sql.cpp:194 msgid "print this help" msgstr "print this help" #: utils/commands.cpp:57 msgid "exit program" msgstr "exit program" #: utils/commands.cpp:64 msgid "Good bye" msgstr "Good bye" #: utils/odbx-sql.cpp:128 msgid "Interactive SQL shell, use .help to list available commands" msgstr "Interactive SQL shell, use .help to list available commands" #: utils/odbx-sql.cpp:169 msgid "Warning: " msgstr "Warning: " #: utils/odbx-sql.cpp:195 msgid "name of the backend or path to the backend library" msgstr "name of the backend or path to the backend library" #: utils/odbx-sql.cpp:196 msgid "read configuration from file" msgstr "read configuration from file" #: utils/odbx-sql.cpp:197 msgid "database name or database file name" msgstr "database name or database file name" #: utils/odbx-sql.cpp:198 msgid "start/end field delimiter in output" msgstr "start/end field delimiter in output" #: utils/odbx-sql.cpp:199 msgid "host name, IP address or path to the database server" msgstr "host name, IP address or path to the database server" #: utils/odbx-sql.cpp:200 msgid "interactive mode" msgstr "interactive mode" #: utils/odbx-sql.cpp:201 msgid "SQL keyword file for command completion" msgstr "SQL keyword file for command completion" #: utils/odbx-sql.cpp:202 msgid "port name or number of the database server" msgstr "port name or number of the database server" #: utils/odbx-sql.cpp:203 msgid "separator between fields in output" msgstr "separator between fields in output" #: utils/odbx-sql.cpp:204 msgid "user name for authentication" msgstr "user name for authentication" #: utils/odbx-sql.cpp:205 msgid "with prompt asking for the passphrase" msgstr "with prompt asking for the passphrase" #: utils/odbx-sql.cpp:218 msgid "Password: " msgstr "Password: " #: utils/odbx-sql.cpp:245 msgid "Error: " msgstr "Error: " #: utils/odbx-sql.cpp:250 msgid "Error: Caught unknown exception" msgstr "Error: Caught unknown exception" opendbx-1.4.6/utils/po/de.po0000644000175000017500000001006511765214162012617 00000000000000# German translations for opendbx package. # Copyright (C) 2008 Free Software Foundation, Inc. # This file is distributed under the same license as the opendbx package. # , 2008. # msgid "" msgstr "" "Project-Id-Version: opendbx 1.3.7\n" "Report-Msgid-Bugs-To: norbert@linuxnetworks.de\n" "POT-Creation-Date: 2012-06-10 23:58+0200\n" "PO-Revision-Date: 2008-04-04 00:18+0200\n" "Last-Translator: \n" "Language-Team: German\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: utils/commands.cpp:31 msgid "Unknown command, use .help to list available commands" msgstr "" "Unbekannter Befehl. Benutzen Sie .help für eine Liste der verfügbaren Befehle" #: utils/commands.cpp:42 msgid "Printing column names is now enabled" msgstr "Spaltennamen werden jetzt ausgegeben" #: utils/commands.cpp:45 msgid "Printing column names is now disabled" msgstr "Spaltennamen werden jetzt nicht mehr ausgegeben" #: utils/commands.cpp:54 msgid "Available commands:" msgstr "Verfügbare Befehle:" #: utils/commands.cpp:55 msgid "toggle printing column names for result sets" msgstr "Spaltennamen für Ergebnislisten ein-/ausschalten" #: utils/commands.cpp:56 utils/odbx-sql.cpp:194 msgid "print this help" msgstr "Diese Hilfe ausgeben" #: utils/commands.cpp:57 msgid "exit program" msgstr "Programm beenden" #: utils/commands.cpp:64 msgid "Good bye" msgstr "Auf Wiedersehen" #: utils/odbx-sql.cpp:128 msgid "Interactive SQL shell, use .help to list available commands" msgstr "" "Interaktive SQL Eingabeaufforderung.\n" "Geben Sie .help für eine Liste der verfügbaren Befehle ein" #: utils/odbx-sql.cpp:169 msgid "Warning: " msgstr "Warnung: " #: utils/odbx-sql.cpp:195 msgid "name of the backend or path to the backend library" msgstr "Treibername oder Verzeichnispfad zur Treiberbibliothek" #: utils/odbx-sql.cpp:196 msgid "read configuration from file" msgstr "Name der Konfigurationsdatei" #: utils/odbx-sql.cpp:197 msgid "database name or database file name" msgstr "Datenbankname oder Dateiname der Datenbank" #: utils/odbx-sql.cpp:198 #, fuzzy msgid "start/end field delimiter in output" msgstr "Zeichen, das einzelne Felder in der Ausgabe umschliesst" #: utils/odbx-sql.cpp:199 msgid "host name, IP address or path to the database server" msgstr "Name, Adresse oder Verzeichnispfad des Datenbankservers" #: utils/odbx-sql.cpp:200 msgid "interactive mode" msgstr "Interaktiver Modus" #: utils/odbx-sql.cpp:201 msgid "SQL keyword file for command completion" msgstr "SQL Schlüsselwortdatei für Befehlsvervollständigung" #: utils/odbx-sql.cpp:202 msgid "port name or number of the database server" msgstr "Portname oder -nummer des Datenbankservers" #: utils/odbx-sql.cpp:203 msgid "separator between fields in output" msgstr "Trennzeichen zwischen Feldern in der Ausgabe" #: utils/odbx-sql.cpp:204 msgid "user name for authentication" msgstr "Benutzername für Authentifizierung" #: utils/odbx-sql.cpp:205 msgid "with prompt asking for the passphrase" msgstr "Eingabeaufforderung für Passwort anzeigen" #: utils/odbx-sql.cpp:218 msgid "Password: " msgstr "Passwort: " #: utils/odbx-sql.cpp:245 msgid "Error: " msgstr "Fehler: " #: utils/odbx-sql.cpp:250 msgid "Error: Caught unknown exception" msgstr "Fehler: Es ist eine unbekannte Ausnahme aufgetreten" #~ msgid "Configuration file parameter is mandatory" #~ msgstr "Der Parameter für die Konfigurationsdatei ist zwingend erforderlich" #~ msgid "Unable to initialize configuration file parser" #~ msgstr "Der Konfigurationsparser konnte nicht initialisiert werden" #~ msgid "Read and execute semicolon-terminated SQL statements from stdin" #~ msgstr "" #~ "Führt durch Strichpunkt getrennte SQL Anweisungen von der " #~ "Eingabeaufforderung aus" #~ msgid "Usage: " #~ msgstr "Benutzung: " #~ msgid "start/end delimiter for fields in output" #~ msgstr "Zeichen, das einzelne Felder in der Ausgabe umschliesst" #, fuzzy #~ msgid "print table header in output" #~ msgstr "Trennzeichen zwischen Feldern in der Ausgabe" opendbx-1.4.6/utils/po/Rules-quot0000644000175000017500000000337611425153450013674 00000000000000# Special Makefile rules for English message catalogs with quotation marks. DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot .SUFFIXES: .insert-header .po-update-en en@quot.po-create: $(MAKE) en@quot.po-update en@boldquot.po-create: $(MAKE) en@boldquot.po-update en@quot.po-update: en@quot.po-update-en en@boldquot.po-update: en@boldquot.po-update-en .insert-header.po-update-en: @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ ll=`echo $$lang | sed -e 's/@.*//'`; \ LC_ALL=C; export LC_ALL; \ cd $(srcdir); \ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "creation of $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi en@quot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header en@boldquot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header mostlyclean: mostlyclean-quot mostlyclean-quot: rm -f *.insert-header opendbx-1.4.6/utils/po/en@boldquot.header0000644000175000017500000000247111425153450015312 00000000000000# All this catalog "translates" are quotation characters. # The msgids must be ASCII and therefore cannot contain real quotation # characters, only substitutes like grave accent (0x60), apostrophe (0x27) # and double quote (0x22). These substitutes look strange; see # http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html # # This catalog translates grave accent (0x60) and apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019). # It also translates pairs of apostrophe (0x27) to # left single quotation mark (U+2018) and right single quotation mark (U+2019) # and pairs of quotation mark (0x22) to # left double quotation mark (U+201C) and right double quotation mark (U+201D). # # When output to an UTF-8 terminal, the quotation characters appear perfectly. # When output to an ISO-8859-1 terminal, the single quotation marks are # transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to # grave/acute accent (by libiconv), and the double quotation marks are # transliterated to 0x22. # When output to an ASCII terminal, the single quotation marks are # transliterated to apostrophes, and the double quotation marks are # transliterated to 0x22. # # This catalog furthermore displays the text between the quotation marks in # bold face, assuming the VT100/XTerm escape sequences. # opendbx-1.4.6/utils/po/LINGUAS0000644000175000017500000000001311425153450012677 00000000000000en@quot de opendbx-1.4.6/utils/completion.cpp0000644000175000017500000000207111425153450014117 00000000000000#include "completion.hpp" #include #include #include Completion::Completion( const string& filename ) { string keyword; std::ifstream ifs( filename.c_str() ); while( getline( ifs, keyword ) ) { if( keyword.size() > 0 && keyword[0] != '#' ) { m_keywords[keyword] = ""; } } ifs.close(); } void Completion::find( const char* keyword ) { m_keyword = string( keyword ); for( m_next = m_keywords.begin(); m_next != m_keywords.end(); m_next++ ) { if( !strncasecmp( m_keyword.c_str(), m_next->first.c_str(), m_keyword.size() ) ) { return; } } } const char* Completion::get() { if( m_next != m_keywords.end() && !strncasecmp( m_keyword.c_str(), m_next->first.c_str(), m_keyword.size() ) ) { map::iterator cur = m_next; m_next++; return cur->first.c_str(); } return NULL; } // int main( void ) // { // char* keyword; // Completion cmpl( "keywords" ); // // cmpl.find( "DE" ); // // while( ( keyword = cmpl.get() ) != NULL ) // { // std::cout << keyword << std::endl; // } // // return 0; // } opendbx-1.4.6/utils/odbx-sql.hpp0000644000175000017500000000024511425153450013505 00000000000000#include using std::string; #ifndef ODBX_SQL_HPP #define ODBX_SQL_HPP struct format { string delimiter; string separator; bool header; }; #endif opendbx-1.4.6/utils/Makefile.in0000644000175000017500000010134011765211301013303 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ @ENABLEUTILS_TRUE@bin_PROGRAMS = odbx-sql$(EXEEXT) subdir = utils DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)" PROGRAMS = $(bin_PROGRAMS) am__odbx_sql_SOURCES_DIST = argmap.cpp argmap.hpp commands.cpp \ commands.hpp completion.cpp completion.hpp odbx-sql.hpp \ odbx-sql.cpp @ENABLEUTILS_TRUE@am_odbx_sql_OBJECTS = odbx_sql-argmap.$(OBJEXT) \ @ENABLEUTILS_TRUE@ odbx_sql-commands.$(OBJEXT) \ @ENABLEUTILS_TRUE@ odbx_sql-completion.$(OBJEXT) \ @ENABLEUTILS_TRUE@ odbx_sql-odbx-sql.$(OBJEXT) odbx_sql_OBJECTS = $(am_odbx_sql_OBJECTS) am__DEPENDENCIES_1 = @ENABLEUTILS_TRUE@odbx_sql_DEPENDENCIES = ../lib/.libs/$(LIBPREFIX)opendbx$(LIBSUFFIX) \ @ENABLEUTILS_TRUE@ ../lib/.libs/$(LIBPREFIX)opendbxplus$(LIBSUFFIX) \ @ENABLEUTILS_TRUE@ $(am__DEPENDENCIES_1) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(odbx_sql_SOURCES) DIST_SOURCES = $(am__odbx_sql_SOURCES_DIST) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' DATA = $(pkgdata_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = doc po DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ @ENABLEUTILS_TRUE@SUBDIRS = doc po @ENABLEUTILS_TRUE@INCLUDES = -I../lib @ENABLEUTILS_TRUE@odbx_sql_SOURCES = argmap.cpp argmap.hpp commands.cpp commands.hpp completion.cpp completion.hpp odbx-sql.hpp odbx-sql.cpp @ENABLEUTILS_TRUE@odbx_sql_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" -DKEYWORDFILE=\"$(pkgdatadir)/keywords\" @ENABLEUTILS_TRUE@odbx_sql_LDADD = ../lib/.libs/$(LIBPREFIX)opendbx$(LIBSUFFIX) ../lib/.libs/$(LIBPREFIX)opendbxplus$(LIBSUFFIX) $(LTLIBINTL) -lreadline -lncurses @ENABLEUTILS_TRUE@EXTRA_DIST = keywords @ENABLEUTILS_TRUE@pkgdata_DATA = keywords all: all-recursive .SUFFIXES: .SUFFIXES: .cpp .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu utils/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu utils/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p || test -f $$p1; \ then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ echo " rm -f" $$list; \ rm -f $$list || exit $$?; \ test -n "$(EXEEXT)" || exit 0; \ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list odbx-sql$(EXEEXT): $(odbx_sql_OBJECTS) $(odbx_sql_DEPENDENCIES) @rm -f odbx-sql$(EXEEXT) $(CXXLINK) $(odbx_sql_OBJECTS) $(odbx_sql_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/odbx_sql-argmap.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/odbx_sql-commands.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/odbx_sql-completion.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/odbx_sql-odbx-sql.Po@am__quote@ .cpp.o: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< .cpp.obj: @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cpp.lo: @am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< odbx_sql-argmap.o: argmap.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-argmap.o -MD -MP -MF $(DEPDIR)/odbx_sql-argmap.Tpo -c -o odbx_sql-argmap.o `test -f 'argmap.cpp' || echo '$(srcdir)/'`argmap.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-argmap.Tpo $(DEPDIR)/odbx_sql-argmap.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='argmap.cpp' object='odbx_sql-argmap.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-argmap.o `test -f 'argmap.cpp' || echo '$(srcdir)/'`argmap.cpp odbx_sql-argmap.obj: argmap.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-argmap.obj -MD -MP -MF $(DEPDIR)/odbx_sql-argmap.Tpo -c -o odbx_sql-argmap.obj `if test -f 'argmap.cpp'; then $(CYGPATH_W) 'argmap.cpp'; else $(CYGPATH_W) '$(srcdir)/argmap.cpp'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-argmap.Tpo $(DEPDIR)/odbx_sql-argmap.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='argmap.cpp' object='odbx_sql-argmap.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-argmap.obj `if test -f 'argmap.cpp'; then $(CYGPATH_W) 'argmap.cpp'; else $(CYGPATH_W) '$(srcdir)/argmap.cpp'; fi` odbx_sql-commands.o: commands.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-commands.o -MD -MP -MF $(DEPDIR)/odbx_sql-commands.Tpo -c -o odbx_sql-commands.o `test -f 'commands.cpp' || echo '$(srcdir)/'`commands.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-commands.Tpo $(DEPDIR)/odbx_sql-commands.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='commands.cpp' object='odbx_sql-commands.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-commands.o `test -f 'commands.cpp' || echo '$(srcdir)/'`commands.cpp odbx_sql-commands.obj: commands.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-commands.obj -MD -MP -MF $(DEPDIR)/odbx_sql-commands.Tpo -c -o odbx_sql-commands.obj `if test -f 'commands.cpp'; then $(CYGPATH_W) 'commands.cpp'; else $(CYGPATH_W) '$(srcdir)/commands.cpp'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-commands.Tpo $(DEPDIR)/odbx_sql-commands.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='commands.cpp' object='odbx_sql-commands.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-commands.obj `if test -f 'commands.cpp'; then $(CYGPATH_W) 'commands.cpp'; else $(CYGPATH_W) '$(srcdir)/commands.cpp'; fi` odbx_sql-completion.o: completion.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-completion.o -MD -MP -MF $(DEPDIR)/odbx_sql-completion.Tpo -c -o odbx_sql-completion.o `test -f 'completion.cpp' || echo '$(srcdir)/'`completion.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-completion.Tpo $(DEPDIR)/odbx_sql-completion.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='completion.cpp' object='odbx_sql-completion.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-completion.o `test -f 'completion.cpp' || echo '$(srcdir)/'`completion.cpp odbx_sql-completion.obj: completion.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-completion.obj -MD -MP -MF $(DEPDIR)/odbx_sql-completion.Tpo -c -o odbx_sql-completion.obj `if test -f 'completion.cpp'; then $(CYGPATH_W) 'completion.cpp'; else $(CYGPATH_W) '$(srcdir)/completion.cpp'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-completion.Tpo $(DEPDIR)/odbx_sql-completion.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='completion.cpp' object='odbx_sql-completion.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-completion.obj `if test -f 'completion.cpp'; then $(CYGPATH_W) 'completion.cpp'; else $(CYGPATH_W) '$(srcdir)/completion.cpp'; fi` odbx_sql-odbx-sql.o: odbx-sql.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-odbx-sql.o -MD -MP -MF $(DEPDIR)/odbx_sql-odbx-sql.Tpo -c -o odbx_sql-odbx-sql.o `test -f 'odbx-sql.cpp' || echo '$(srcdir)/'`odbx-sql.cpp @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-odbx-sql.Tpo $(DEPDIR)/odbx_sql-odbx-sql.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='odbx-sql.cpp' object='odbx_sql-odbx-sql.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-odbx-sql.o `test -f 'odbx-sql.cpp' || echo '$(srcdir)/'`odbx-sql.cpp odbx_sql-odbx-sql.obj: odbx-sql.cpp @am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT odbx_sql-odbx-sql.obj -MD -MP -MF $(DEPDIR)/odbx_sql-odbx-sql.Tpo -c -o odbx_sql-odbx-sql.obj `if test -f 'odbx-sql.cpp'; then $(CYGPATH_W) 'odbx-sql.cpp'; else $(CYGPATH_W) '$(srcdir)/odbx-sql.cpp'; fi` @am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/odbx_sql-odbx-sql.Tpo $(DEPDIR)/odbx_sql-odbx-sql.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='odbx-sql.cpp' object='odbx_sql-odbx-sql.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(odbx_sql_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o odbx_sql-odbx-sql.obj `if test -f 'odbx-sql.cpp'; then $(CYGPATH_W) 'odbx-sql.cpp'; else $(CYGPATH_W) '$(srcdir)/odbx-sql.cpp'; fi` mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-pkgdataDATA: $(pkgdata_DATA) @$(NORMAL_INSTALL) test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ done uninstall-pkgdataDATA: @$(NORMAL_UNINSTALL) @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-pkgdataDATA install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-pkgdataDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-binPROGRAMS \ clean-generic clean-libtool ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-binPROGRAMS install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-pkgdataDATA install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-binPROGRAMS uninstall-pkgdataDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/utils/argmap.hpp0000644000175000017500000000343411645365576013250 00000000000000/* * Parameter parsing from file, command line and environment * (c) 2006-2008, Norbert Sendetzky * Inspired by PowerDNS ArgvMap code * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include #include #include #include #ifndef ARGMAP_HPP #define ARGMAP_HPP using std::map; using std::string; using std::vector; class ArgException : public std::runtime_error { public: explicit ArgException( const string& str ) : std::runtime_error( str ) {} }; class ArgMap { protected: struct argopt { string longopt; string shortopt; string value; string help; bool req; }; vector m_items; vector m_arg; map m_long; map m_short; int getOptionType( const string& arg ); void parseItem( const string& item, bool strict ); void parseLongOption( const string& keyvalue, bool strict ); void parseShortOption( const string& arg, const string& value, bool strict ); public: enum opttype { Delimiter, Item, Short, Long }; string& set( const string& longopt, const string& shortopt, const string& help, bool req = true ); bool mustDo( const string &arg ); long asLong( const string& arg ); double asDouble( const string& arg ); const string& asString( const string& arg ); vector getArgList(); const vector& getItems(); bool checkArgv( int argc, char* argv[], const string& str, string& val ); void parseArgv( int argc, char* argv[], bool strict = true ); void parseFile( const string& filename, bool strict = true ); void parseEnv( char* env[], bool strict = false ); string help( const string& prefix = "" ); string config(); }; #endif /* ARGUMENTS_HH */ opendbx-1.4.6/utils/odbx-sql.cpp0000644000175000017500000001343211765206763013517 00000000000000#include "argmap.hpp" #include "commands.hpp" #include "completion.hpp" #include "odbx-sql.hpp" #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_CONFIG_H #include #endif #ifdef ENABLE_NLS # ifdef HAVE_LIBINTL_H # include # endif #else # define gettext(string) string #endif using namespace OpenDBX; using std::string; using std::cout; using std::cerr; using std::endl; string help( ArgMap& A, const string& progname ) { return "\nOpenDBX SQL shell, version " + string( PACKAGE_VERSION ) + "\n\n" + progname + " [options]\n\n" + A.help() + "\n"; } // hack to access completion Completion* g_comp = NULL; char* complete( const char* text, int state ) { char* match = NULL; if( g_comp != NULL ) { if( state == 0 ) { g_comp->find( text ); } if( ( match = (char*) g_comp->get() ) != NULL ) { return strdup( match ); } } return match; } void output( Result& result, struct format* fparam ) { odbxres stat; unsigned long fields; while( ( stat = result.getResult( NULL, 25 ) ) != ODBX_RES_DONE ) { switch( stat ) { case ODBX_RES_TIMEOUT: case ODBX_RES_NOROWS: continue; default: break; } fields = result.columnCount(); if( fparam->header == true && fields > 0 ) { cout << result.columnName( 0 ); for( unsigned long i = 1; i < fields; i++ ) { cout << fparam->separator << result.columnName( i ); } cout << endl << "---" << endl; } while( result.getRow() != ODBX_ROW_DONE ) { if( fields > 0 ) { if( result.fieldValue( 0 ) == NULL ) { cout << "NULL"; } else { cout << fparam->delimiter << result.fieldValue( 0 ) << fparam->delimiter; } for( unsigned long i = 1; i < fields; i++ ) { if( result.fieldValue( i ) == NULL ) { cout << fparam->separator << "NULL"; } else { cout << fparam->separator << fparam->delimiter << result.fieldValue( i ) << fparam->delimiter; } } } cout << endl; } } } void loopstmts( Conn& conn, struct format* fparam, bool iactive ) { char* line; size_t len; string sql; const char* fprompt = ""; const char* cprompt = ""; Commands cmd( conn ); if( iactive ) { cout << gettext( "Interactive SQL shell, use .help to list available commands" ) << endl; fprompt = "sql> "; cprompt = " -> "; using_history(); } while( ( line = readline( fprompt ) ) != NULL ) { len = strlen( line ); if( len == 0 ) { free( line ); continue;} if( line[0] == '.' ) { cmd.exec( string( line ), fparam ); continue; } sql = string( line, len ); ::free( line ); if( sql[len-1] != ';' ) { while( ( line = readline( cprompt ) ) != NULL ) { len = strlen( line ); sql += "\n" + string( line, len ); ::free( line ); if( sql[sql.size()-1] == ';' ) { break; } } } if( iactive ) { add_history( sql.c_str() ); } if( sql[sql.size()-1] == ';' ) { sql.erase( sql.size()-1, 1 ); } try { Stmt stmt = conn.create( sql ); Result result = stmt.execute(); output( result, fparam ); result.finish(); } catch( OpenDBX::Exception& oe ) { cerr << gettext( "Warning: " ) << oe.what() << endl; if( oe.getType() < 0 ) { return; } } } } int main( int argc, char* argv[] ) { try { ArgMap A; string config; #ifdef ENABLE_NLS setlocale( LC_ALL, "" ); textdomain( "opendbx-utils" ); bindtextdomain( "opendbx-utils", LOCALEDIR ); #endif if( !A.checkArgv( argc, argv, "--config", config ) ) { if( !A.checkArgv( argc, argv, "-c", config ) ) { config = ""; } } A.set( "help", "?", string( gettext( "print this help" ) ), false ); A.set( "backend", "b", string( gettext( "name of the backend or path to the backend library" ) ) ) = "mysql"; A.set( "config", "c", string( gettext( "read configuration from file" ) ) ) = config; A.set( "database", "d", string( gettext( "database name or database file name" ) ) ); A.set( "delimiter", "f", string( gettext( "start/end field delimiter in output" ) ) ) = "\""; A.set( "host", "h", string( gettext( "host name, IP address or path to the database server" ) ) ) = "localhost"; A.set( "interactive", "i", string( gettext( "interactive mode" ) ), false ); A.set( "keywordfile", "k", string( gettext( "SQL keyword file for command completion" ) ) ) = KEYWORDFILE; A.set( "port", "p", string( gettext( "port name or number of the database server" ) ) ); A.set( "separator", "s", string( gettext( "separator between fields in output" ) ) ) = "|"; A.set( "username", "u", string( gettext( "user name for authentication" ) ) ); string& password = A.set( "password", "w", string( gettext( "with prompt asking for the passphrase" ) ), false ); if( A.asString( "config" ) != "" ) { A.parseFile( A.asString( "config" ) ); } A.parseArgv( argc, argv ); if( A.mustDo( "help" ) ) { std::cout << help( A, string( argv[0] ) ); return 0; } if( A.mustDo( "password" ) ) { std::cout << gettext( "Password: " ); std::cin >> password; } struct format fparam; fparam.delimiter = A.asString( "delimiter" ); fparam.separator = A.asString( "separator" ); fparam.header = true; g_comp = new Completion( A.asString( "keywordfile" ) ); rl_completion_entry_function = &complete; Conn conn( A.asString( "backend" ), A.asString( "host" ), A.asString( "port" ) ); while( 1 ) { conn.bind( A.asString( "database" ), A.asString( "username" ), A.asString( "password" ) ); loopstmts( conn, &fparam, A.mustDo( "interactive" ) ); conn.unbind(); } delete g_comp; } catch( std::runtime_error &e ) { cerr << gettext( "Error: " ) << e.what() << endl; return 1; } catch( ... ) { cerr << gettext( "Error: Caught unknown exception" ) << endl; return 1; } return 0; } opendbx-1.4.6/utils/argmap.cpp0000644000175000017500000002503111645365570013232 00000000000000/* * Parameter parsing from file, command line and environment * (c) 2006-2008, Norbert Sendetzky * Inspired by PowerDNS ArgvMap code * * Distributed under the terms of the GNU Library General Public Licence * version 2 or (at your option) any later version. */ #include "argmap.hpp" #include #include #include #include #include #ifndef gettext_noop #define gettext_noop(string) string #endif /** * Declares a parameter and sets an associated short help message * * @param longopt long name of the parameter * @param shortopt short name of the parameter * @param help short description * @param req if value is required * @returns reference to the parameter content */ string& ArgMap::set( const string& longopt, const string& shortopt, const string& help, bool req ) { struct argopt option; option.longopt = longopt; option.shortopt = shortopt; option.help = help; option.req = req; m_arg.push_back( option ); m_long[longopt] = m_arg.size() - 1; m_short[shortopt] = m_arg.size() - 1; return m_arg[m_arg.size()-1].value; } /** * Tests if the parameter value is 'yes' * * @param arg name of the parameter * @returns true if the parameter value is true, false otherwise * @throws ArgException - if the parameter doesn't exist */ bool ArgMap::mustDo( const string& arg ) { if( !m_long.count( arg ) ) { throw ArgException( "ArgMap: Undefined parameter '" + arg + "'" ); } return ( m_arg[m_long[arg]].value == "yes" ); } /** * Converts the parameter value to a long integer * * @param arg name of the parameter * @returns long integer value of the string * @throws ArgException - if arg is unknown or the value isn't an integer */ long ArgMap::asLong( const string& arg ) { char* end; long num; if( !m_long.count( arg ) ) { throw ArgException( "ArgMap: Undefined parameter '" + arg + "'" ); } num = strtol( m_arg[m_long[arg]].value.c_str(), &end, 10 ); if( *end != '\0' ) { throw ArgException( "ArgMap: Value of '" + arg + "' is not an integer" ); } return num; } /** * Converts the parameter value to a double * * @param arg name of the parameter * @returns double floating point value of the string * @throws ArgException - if arg is unknown or the value isn't a float */ double ArgMap::asDouble( const string& arg ) { char * end; double num; if( !m_long.count( arg ) ) { throw ArgException( "ArgMap: Undefined parameter '" + arg + "'" ); } num = strtod( m_arg[m_long[arg]].value.c_str(), &end ); if( *end != '\0' ) { throw ArgException( "ArgMap: Value of '" + arg + "' is not a float" ); } return num; } /** * Returns the value of the parameter as string * * @param arg name of the parameter * @returns string value associated to the parameter * @throws ArgException if arg is unknown */ const string& ArgMap::asString( const string& arg ) { if( !m_long.count( arg ) ) { throw ArgException( "ArgMap: Undefined parameter '" + arg + "'" ); } return m_arg[m_long[arg]].value; } /** * Returns a list of all known parameter names * * @returns list of parameter names */ vector ArgMap::getArgList() { vector list; for( size_t i = 0; i < m_arg.size(); i++ ) { list.push_back( m_arg[i].longopt ); } return list; } /** * Returns a list of all non-options. These items are either from the command * line or from a file and are single values. * * @returns list of all items */ const vector& ArgMap::getItems() { return m_items; } /** * Tests if an parameter is set and returns the value * * @param argc number of parameters given in argv * @param argv vector of C strings * @param str name of the parameter you are looking for * @param val reference for storing the parameter value * @returns true if the parameter was found, false otherwise */ bool ArgMap::checkArgv( int argc, char* argv[], const string& str, string& val ) { val = ""; for( int i = 1; i < argc; i++ ) // skip program name { string option( argv[i] ); switch( this->getOptionType( option ) ) { case ArgMap::Short: if( option == str ) { if( i+1 < argc ) { val = string( argv[i+1] ); } return true; } break; case ArgMap::Long: if( option.substr( 0, str.size() ) == str ) { if( option.size() > str.size() + 1 ) { val = option.substr( str.size() + 1, string::npos ); } return true; } break; } } return false; } /** * Parses the command line and seperates parameters from other items * * @param argc number of parameters in argv * @param argv vector of C strings * @param strict unknown parameters are handled as error * @throws ArgException if an parameter is unknown in strict mode or an option requires a value */ void ArgMap::parseArgv( int argc, char* argv[], bool strict ) { string option, value; // -c prog.conf --config=prog.conf -- progdir for( int pos = 1; pos < argc; pos++ ) // skip program name { option = string( argv[pos] ); switch( this->getOptionType( option ) ) { case ArgMap::Item: this->parseItem( option, strict ); break; case ArgMap::Delimiter: do { this->parseItem( string( argv[++pos] ), strict ); } while( pos < argc ); break; case ArgMap::Short: option = string( argv[pos]+1, 1 ); value = "yes"; if( m_arg[m_short[option]].req ) { if( pos+1 >= argc ) { throw ArgException( "Option '-" + option + "' requires a value" ); } else { value = string( argv[++pos] ); } } this->parseShortOption( option, value, strict ); break; case ArgMap::Long: this->parseLongOption( string( argv[pos] + 2 ), strict ); break; default: throw ArgException( "Invalid option type for '" + option + "'" ); } } } /** * Extracts arguments and/or items from a file * * @param filename name of the config file * @param strict unknown parameters are handled as error * @throws ArgException if an parameter is unknown in strict mode */ void ArgMap::parseFile( const string& filename, bool strict ) { string::size_type pos; string line, statement; std::ifstream file( filename.c_str() ); if( !file ) { throw ArgException( "ArgMap: Can't open file " + filename ); } while( getline( file, line ) ) { if( ( pos = line.find( '#' ) ) != string::npos ) { line.erase( pos, string::npos ); } if( line.find_first_not_of( " \t" ) == string::npos ) { statement = ""; continue; } if( ( pos = line.rfind( '\\' ) ) == string::npos ) { this->parseLongOption( statement + line, strict ); statement = ""; continue; } line.erase( pos - 1, string::npos ); statement += line; } file.close(); } /** * Parses the environment variables * * @param env environment vector ending by NULL * @param strict unknown parameters are handled as error * @throws ArgException if an parameter is unknown in strict mode */ void ArgMap::parseEnv( char* env[], bool strict ) { char** i; for( i = env; (*i) != NULL; i++ ) { this->parseLongOption( string( *i ), strict ); } } /** * Extracts a single item from the string * * @param str string containing the item */ void ArgMap::parseItem( const string& str, bool strict ) { string::size_type begin, end; begin = str.find_first_not_of( " \t", 0 ); end = str.find_last_not_of( " \t", string::npos ); str[begin] == '"' ? begin++ : begin; str[end] == '"' ? end-- : end; if( begin != string::npos ) { m_items.push_back( str.substr( begin, end - begin + 1 ) ); } } /** * Extracts a single parameter name and value from a string * * @param keyvalue pair of name and value seperated by a equal sign * @param strict unknown parameters are handled as error * @throws ArgException if an parameter is unknown in strict mode */ void ArgMap::parseLongOption( const string& keyvalue, bool strict ) { string::size_type pos, begin, end; string name; if( ( pos = keyvalue.find( "=" ) ) == string::npos ) { parseItem( keyvalue, strict ); return; } begin = keyvalue.find_first_not_of( " \t", 0 ); end = keyvalue.find_last_not_of( " \t", pos - 1 ); name = keyvalue.substr( begin, end - begin + 1 ); if( strict && !m_long.count( name ) ) { throw ArgException( "ArgMap: Undefined parameter '" + name + "'" ); } begin = keyvalue.find_first_not_of( " \t", pos + 1 ); end = keyvalue.find_last_not_of( " \t", string::npos ); keyvalue[begin] == '"' ? begin++ : begin; keyvalue[end] == '"' ? end-- : end; if( begin != string::npos ) { m_arg[m_long[name]].value = keyvalue.substr( begin, end - begin + 1 ); } } /** * Extracts a single parameter name and value * * @param name name of the parameter * @param value value of the parameter * @param strict unknown parameters are handled as error * @throws ArgException if an parameter is unknown in strict mode */ void ArgMap::parseShortOption( const string& name, const string& value, bool strict ) { if( strict && !m_short.count( name ) ) { throw ArgException( "ArgMap: Undefined parameter '" + name + "'" ); } m_arg[m_short[name]].value = value; } /** * Assembles the help output of all parameters. The output may be limited to * parameters beginning with the prefix * * @param prefix string parameters must begin with * @returns assembled help output */ string ArgMap::help( const string& prefix ) { string help; for( size_t i = 0; i < m_arg.size(); i++ ) { if( m_arg[i].longopt.substr( 0, prefix.length() ) == prefix ) { help += " -" + m_arg[i].shortopt + ", --" + m_arg[i].longopt + ( m_arg[i].req ? "=... (default: '" + m_arg[i].value + "')" : "" ) + "\n"; help += " " + m_arg[i].help + "\n"; } } return help; } /** * Assembles all parameters, values and descriptions to an output suitable for * a config file * * @returns string suitable for config file */ string ArgMap::config() { string config = "# Autogenerated configuration file template\n\n"; for( size_t i = 0; i < m_arg.size(); i++ ) { config += "#################################\n"; config += "# " + m_arg[i].longopt + "\t" + m_arg[i].help + "\n"; config += "#\n"; config += "# " + m_arg[i].longopt + ( m_arg[i].req ? "=" + m_arg[i].value : "" ) + "\n\n"; } return config; } /** * Returns the type of the parameter given by the user. * * @return Type constant defined in ArgMap */ int ArgMap::getOptionType( const string& arg ) { if( arg.size() < 2 ) { return ArgMap::Item; } if( arg[0] != '-' ) { return ArgMap::Item; } if( arg[1] != '-' ) { return ArgMap::Short; } if( arg.size() > 2 ) { return ArgMap::Long; } return ArgMap::Delimiter; } opendbx-1.4.6/utils/commands.hpp0000644000175000017500000000142211425153450013553 00000000000000#include "odbx-sql.hpp" #include #include #include #ifdef HAVE_CONFIG_H #include #endif #ifdef ENABLE_NLS # ifdef HAVE_LIBINTL_H # include # endif #else # define gettext(string) string #endif using std::string; using std::map; #ifndef COMMANDS_HPP #define COMMANDS_HPP class Commands { protected: typedef void (Commands::*cmdfunc)( const string&, struct format* fparam ); OpenDBX::Conn m_conn; std::map m_cmds; void header( const string& str, struct format* fparam ); void help( const string& str, struct format* fparam ); void quit( const string& str, struct format* fparam ); public: Commands( OpenDBX::Conn& conn ); void exec( const string& cmd, struct format* fparam ); }; #endif opendbx-1.4.6/utils/Makefile.am0000644000175000017500000000075411765207547013322 00000000000000if ENABLEUTILS SUBDIRS = doc po INCLUDES = -I../lib bin_PROGRAMS = odbx-sql odbx_sql_SOURCES = argmap.cpp argmap.hpp commands.cpp commands.hpp completion.cpp completion.hpp odbx-sql.hpp odbx-sql.cpp odbx_sql_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" -DKEYWORDFILE=\"$(pkgdatadir)/keywords\" odbx_sql_LDADD = ../lib/.libs/$(LIBPREFIX)opendbx$(LIBSUFFIX) ../lib/.libs/$(LIBPREFIX)opendbxplus$(LIBSUFFIX) $(LTLIBINTL) -lreadline -lncurses EXTRA_DIST = keywords pkgdata_DATA = keywords endif opendbx-1.4.6/utils/completion.hpp0000644000175000017500000000062211425153450014124 00000000000000#include #include #include #include using std::string; using std::map; #ifndef COMPLETION_HPP #define COMPLETION_HPP class Completion { protected: map m_keywords; map::iterator m_next; string m_keyword; public: Completion( const string& filename ); void find( const char* keyword ); const char* get(); }; #endif opendbx-1.4.6/utils/doc/0000755000175000017500000000000011765214162012074 500000000000000opendbx-1.4.6/utils/doc/opendbx-utils.en.xml0000644000175000017500000001377411425153450015743 00000000000000 OpenDBX Norbert Sendetzky norbert@linuxnetworks.de OpenDBX reference pages odbx-sql 1 odbx-sql Swiss army knife for communicating with databases and interactive SQL shell odbx-sql -? -b backend -c configfile -d database -f delimiter -h host -i -k keywordfile -p port -s separator -u username -w Description odbx-sql is a small and flexible utiltiy to communicate with the databases supported by the OpenDBX library. In batch mode, it's main purpose is automating tasks in shell scripts which require working with databases. On the other side, the interactive mode provides a convenient SQL shell for modifying database content or testing statements. The format of the output can be controlled to some extend by defining strings for separation between columns and for delimiting field values. Options -h, --help Print help including a short description of available options. -b, --backend=name Name of the database backend that should be used or path to the backend library of the OpenDBX driver. -c, --config=configfile Configuration file with parameters required for connecting to the database. The file can include values for the backend that should be used, the host name or ip address (and maybe the port if required), the database name and the user and password. These values should be placed into the configuration file to be able to access them from non-interactive program execution savely without revealing the password anywhere. A full example of such a configuration file can be found in the example section of this manual. -d, --database=name Name of the database on the server or path to the database file in the local file system. -f, --delimiter=character Single character or string that should surround field values which are returned by SELECT-like statements and printed to stdout. -h, --host=name Host name, IP address or path to the database file. It can also be the path to a named pipe in order to communicate to the database server only locally. -i, --interactive Run in interactive mode and provide a convenient SQL shell contrary to batch mode which is waiting for input from stdin and printing results to stdout. -k keywordfile Location of a keyword file used for providing auto-completion of keywords. -p, --port=port TCP/IP port name or number the database server is listening to. If this parameter isn't added at the command line, most database client libraries use the default value. Many but not all database server can resolve the port number from its name and for a maximum of portability the parameter value should be the port number. -s separator Single character or string that should separate field values which are returned by SELECT-like statements and printed to stdout. -u, --username=name Name of the user which is sent to the database server for authentication. -w, --password Prompt for a password at the command line. Examples Configuration file backend = mysql host = localhost port = 3306 database = test username = myuser password = secret Starting in interactive mode odbx-sql -c mysql.conf -i Executing commands in batch mode cat stmt.sql | odbx-sql -c mysql.conf Exit status odbx-sql returns 1 if an error occured and 0 if all commands succeeded or only warnings are reported. If warnings occur, they are written to stderr. opendbx-1.4.6/utils/doc/Makefile.in0000644000175000017500000003450411765211301014057 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = utils/doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ APINUMBER = @APINUMBER@ APIPLUSVERSION = @APIPLUSVERSION@ APIVERSION = @APIVERSION@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBFIREBIRD = @LIBFIREBIRD@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMSSQL = @LIBMSSQL@ LIBMYSQL = @LIBMYSQL@ LIBOBJS = @LIBOBJS@ LIBODBC = @LIBODBC@ LIBORACLE = @LIBORACLE@ LIBPGSQL = @LIBPGSQL@ LIBPREFIX = @LIBPREFIX@ LIBS = @LIBS@ LIBSQLITE = @LIBSQLITE@ LIBSQLITE3 = @LIBSQLITE3@ LIBSUFFIX = @LIBSUFFIX@ LIBSYBASE = @LIBSYBASE@ LIBTOOL = @LIBTOOL@ LIBVERSION = @LIBVERSION@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINLIBS = @MAINLIBS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ POSUB = @POSUB@ POW_LIB = @POW_LIB@ RANLIB = @RANLIB@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ backendlibs = @backendlibs@ backends = @backends@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ db2man = @db2man@ docdir = @docdir@ doxygen = @doxygen@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ EXTRA_DIST = opendbx-utils.en.xml @ENABLEMAN_TRUE@man_MANS = \ @ENABLEMAN_TRUE@ odbx-sql.1 all: all-am .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu utils/doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu utils/doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(MANS) installdirs: for dir in "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." @ENABLEMAN_FALSE@clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ distclean distclean-generic distclean-libtool distdir dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-man1 \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-man uninstall-man1 @ENABLEMAN_TRUE@odbx-sql.1: opendbx-utils.en.xml @ENABLEMAN_TRUE@ db2x_xsltproc -s man opendbx-utils.en.xml | db2x_manxml --solinks @ENABLEMAN_TRUE@clean: @ENABLEMAN_TRUE@ rm -f odbx-sql.1 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: opendbx-1.4.6/utils/doc/Makefile.am0000644000175000017500000000032111425153450014037 00000000000000EXTRA_DIST = opendbx-utils.en.xml if ENABLEMAN odbx-sql.1: opendbx-utils.en.xml db2x_xsltproc -s man opendbx-utils.en.xml | db2x_manxml --solinks clean: rm -f odbx-sql.1 man_MANS = \ odbx-sql.1 endif opendbx-1.4.6/utils/commands.cpp0000644000175000017500000000303111425153450013544 00000000000000#include "commands.hpp" #include #include Commands::Commands( OpenDBX::Conn& conn ) { m_conn = conn; m_cmds[".header"] = &Commands::header; m_cmds[".help"] = &Commands::help; m_cmds[".quit"] = &Commands::quit; } void Commands::exec( const string& cmdstr, struct format* fparam ) { string cmd, arg; string::size_type pos = cmdstr.find_first_of( " \n\t" ); if( pos != string::npos ) { cmd = cmdstr.substr( 0, pos ); arg = cmdstr.substr( pos, string::npos ); } else { cmd = cmdstr; } if( m_cmds.find( cmd ) == m_cmds.end() ) { std::cout << gettext( "Unknown command, use .help to list available commands" ) << std::endl; } else { (this->*m_cmds[cmd])( arg, fparam ); } } void Commands::header( const string& str, struct format* fparam ) { if( fparam->header != true ) { std::cout << gettext( "Printing column names is now enabled" ) << std::endl; fparam->header = true; } else{ std::cout << gettext( "Printing column names is now disabled" ) << std::endl; fparam->header = false; } } void Commands::help( const string& str, struct format* fparam ) { std::cout << gettext( "Available commands:" ) << std::endl; std::cout << " .header " << gettext( "toggle printing column names for result sets" ) << std::endl; std::cout << " .help " << gettext( "print this help" ) << std::endl; std::cout << " .quit " << gettext( "exit program" ) << std::endl; } void Commands::quit( const string& str, struct format* fparam ) { std::cout << gettext( "Good bye" ) << std::endl; ::exit( 0 ); } opendbx-1.4.6/utils/keywords0000644000175000017500000001062711425153450013042 00000000000000# reserved words ADD ALL ALLOCATE ALTER AND ANY ARE ARRAY AS ASENSITIVE ASYMMETRIC AT ATOMIC AUTHORIZATION BEGIN BETWEEN BIGINT BINARY BLOB BOOLEAN BOTH CALL CALLED CASCADED CASE CAST CHAR CHARACTER CHECK CLOB CLOSE COLLATE COLUMN COMMIT CONNECT CONSTRAINT CONTINUE CORRESPONDING CREATE CROSS JOIN CUBE CURRENT CURRENT_DATE CURRENT_DEFAULT_TRANSFORM_GROUP CURRENT_PATH CURRENT_ROLE CURRENT_TIME CURRENT_TIMESTAMP CURRENT_TRANSFORM_GROUP_FOR_TYPE CURRENT_USER CURSOR CYCLE DATE DAY DEALLOCATE DEC DECIMAL DECLARE DEFAULT DELETE FROM DEREF DESCRIBE DETERMINISTIC DISCONNECT DISTINCT DOUBLE PRECISION DROP DYNAMIC EACH ELEMENT ELSE END ESCAPE EXCEPT EXEC EXECUTE EXISTS EXTERNAL FALSE FETCH FILTER FLOAT FOR FOREIGN FREE FROM FULL FUNCTION GET GLOBAL GRANT GROUP BY GROUPING HAVING HOLD HOUR IDENTITY IMMEDIATE IN INDICATOR INNER JOIN INOUT INPUT INSENSITIVE INSERT INTO INT INTEGER INTERSECT INTERVAL IS ISOLATION JOIN LANGUAGE LARGE LATERAL LEADING LEFT JOIN LIKE LOCAL LOCALTIME LOCALTIMESTAMP MATCH MEMBER MERGE METHOD MINUTE MODIFIES MODULE MONTH MULTISET NATIONAL NATURAL NCHAR NCLOB NEW NO NONE NOT NULL NUMERIC OF OLD ON ONLY OPEN OR ORDER BY OUT OUTER JOIN OUTPUT OVER OVERLAPS PARAMETER PARTITION PREPARE PRIMARY KEY PROCEDURE RANGE READS REAL RECURSIVE REF REFERENCES REFERENCING RELEASE RETURN RETURNS REVOKE RIGHT ROLLBACK ROLLUP ROW ROWS SAVEPOINT SCROLL SEARCH SECOND SELECT SENSITIVE SESSION_USER SET SIMILAR SMALLINT SOME SPECIFIC SPECIFICTYPE SQL SQLEXCEPTION SQLSTATE SQLWARNING START TRANSACTION STATIC SUBMULTISET SYMMETRIC SYSTEM SYSTEM_USER TABLE THEN TIME TIMESTAMP TIMEZONE_HOUR TIMEZONE_MINUTE TO TRAILING TRANSLATION TREAT TRIGGER TRUE UNION UNIQUE UNKNOWN UNNEST UPDATE USER USING VALUE VALUES VARCHAR VARYING WHEN WHENEVER WHERE WINDOW WITH WITHIN WITHOUT YEAR # non-reserved words ABS ABSOLUTE ACTION ADA ADMIN AFTER ALWAYS ASC ASSERTION ASSIGNMENT ATTRIBUTE ATTRIBUTES AVG BEFORE BERNOULLI BREADTHCARDINALITY CASCADE CATALOG CATALOG_NAME CEIL CEILING CHAIN CHARACTERISTICS CHARACTERS CHARACTER_LENGTH CHARACTER_SET_CATALOG CHARACTER_SET_NAME CHARACTER_SET_SCHEMA CHAR_LENGTH CHECKED CLASS_ORIGIN COALESCE COBOL CODE_UNITS COLLATION COLLATION_CATALOG COLLATION_NAME COLLATION_SCHEMA COLLECT COLUMN_NAME COMMAND_FUNCTION COMMAND_FUNCTION_CODE COMMITTED CONDITION CONDITION_NUMBER CONNECTION_NAME CONSTRAINTS CONSTRAINT_CATALOG CONSTRAINT_NAME CONSTRAINT_SCHEMA CONSTRUCTORS CONTAINS CONVERT CORR COUNT COVAR_POP COVAR_SAMP CUME_DIST CURRENT_COLLATION CURSOR_NAME DATA DATETIME_INTERVAL_CODE DATETIME_INTERVAL_PRECISION DEFAULTS DEFERRABLE DEFERRED DEFINED DEFINER DEGREE DENSE_RANK DEPTH DERIVED DESC DESCRIPTOR DIAGNOSTICS DISPATCH DOMAIN DYNAMIC_FUNCTION DYNAMIC_FUNCTION_CODE EQUALS EVERY EXCEPTION EXCLUDE EXCLUDING EXP EXTRACT FINAL FIRST FLOOR FOLLOWING FORTRAN FOUND FUSION GENERAL GO GOTO GRANTED HIERARCHY IMPLEMENTATION INCLUDING INCREMENT INITIALLY INSTANCE INSTANTIABLE INTERSECTION INVOKER ISOLATION KEY KEY_MEMBER KEY_TYPE LAST LENGTH LEVEL LN LOCATOR LOWER MAP MATCHED MAX MAXVALUE MESSAGE_LENGTH MESSAGE_OCTET_LENGTH MESSAGE_TEXT MIN MINVALUE MOD MORE MUMPS NAME NAMES NESTING NEXT NORMALIZE NORMALIZED NULLABLE NULLIF NULLS NUMBER OBJECT OCTETS OCTET_LENGTH OPTION OPTIONS ORDERING ORDINALITY OTHERS OVERLAY OVERRIDING PAD PARAMETER_MODE PARAMETER_NAME PARAMETER_ORDINAL_POSITION PARAMETER_SPECIFIC_CATALOG PARAMETER_SPECIFIC_NAME PARAMETER_SPECIFIC_SCHEMA PARTIAL PASCAL PATH PERCENTILE_CONT PERCENTILE_DISC PERCENT_RANK PLACING PLI POSITION POWER PRECEDING PRESERVE PRIOR PRIVILEGES PUBLIC RANK READ REGR_AVGX REGR_AVGY REGR_COUNT REGR_INTERCEPT REGR_R2 REGR_SLOPE REGR_SXX REGR_SXY REGR_SXY RELATIVE REPEATABLE RESTART RESULT RETURNED_CARDINALITY RETURNED_LENGTH RETURNED_OCTET_LENGTH RETURNED_SQLSTATE ROLE ROUTINE ROUTINE_CATALOG ROUTINE_NAME ROUTINE_SCHEMA ROW_COUNT ROW_NUMBER SCALE SCHEMA SCHEMA_NAME SCOPE_CATALOG SCOPE_NAME SCOPE_SCHEMA SECTION SECURITY SELF SEQUENCE SERIALIZABLE SERVER_NAME SESSION SETS SIMPLE SIZE SOURCE SPACE SPECIFIC_NAME SQRT STATE STATEMENT STDDEV_POP STDDEV_SAMP STRUCTURE STYLE SUBCLASS_ORIGIN SUBSTRING SUM TABLESAMPLE TABLE_NAME TEMPORARY TIES TOP_LEVEL_COUNT TRANSACTION TRANSACTIONS_COMMITTED TRANSACTIONS_ROLLED_BACK TRANSACTION_ACTIVE TRANSFORM TRANSFORMS TRANSLATE TRIGGER_CATALOG TRIGGER_NAME TRIGGER_SCHEMA TRIM TYPE UNBOUNDED UNCOMMITTED UNDER UNNAMED UPPER USAGE USER_DEFINED_TYPE_CATALOG USER_DEFINED_TYPE_CODE USER_DEFINED_TYPE_NAME USER_DEFINED_TYPE_SCHEMA VAR_POP VAR_SAMP VIEW WIDTH_BUCKET WORK WRITE ZONE opendbx-1.4.6/TODO0000644000175000017500000000021611425153450010571 00000000000000TODO for the next releases Release 1.5.x - Prepared statement interface - IBM DB2 backend Release 1.7.x - Ingres backend - Informix backend opendbx-1.4.6/ABOUT-NLS0000644000175000017500000022532611425153451011344 000000000000001 Notes on the Free Translation Project *************************************** Free software is going international! The Free Translation Project is a way to get maintainers of free software, translators, and users all together, so that free software will gradually become able to speak many languages. A few packages already provide translations for their messages. If you found this `ABOUT-NLS' file inside a distribution, you may assume that the distributed package does use GNU `gettext' internally, itself available at your nearest GNU archive site. But you do _not_ need to install GNU `gettext' prior to configuring, installing or using this package with messages translated. Installers will find here some useful hints. These notes also explain how users should proceed for getting the programs to use the available translations. They tell how people wanting to contribute and work on translations can contact the appropriate team. When reporting bugs in the `intl/' directory or bugs which may be related to internationalization, you should tell about the version of `gettext' which is used. The information can be found in the `intl/VERSION' file, in internationalized packages. 1.1 Quick configuration advice ============================== If you want to exploit the full power of internationalization, you should configure it using ./configure --with-included-gettext to force usage of internationalizing routines provided within this package, despite the existence of internationalizing capabilities in the operating system where this package is being installed. So far, only the `gettext' implementation in the GNU C library version 2 provides as many features (such as locale alias, message inheritance, automatic charset conversion or plural form handling) as the implementation here. It is also not possible to offer this additional functionality on top of a `catgets' implementation. Future versions of GNU `gettext' will very likely convey even more functionality. So it might be a good idea to change to GNU `gettext' as soon as possible. So you need _not_ provide this option if you are using GNU libc 2 or you have installed a recent copy of the GNU gettext package with the included `libintl'. 1.2 INSTALL Matters =================== Some packages are "localizable" when properly installed; the programs they contain can be made to speak your own native language. Most such packages use GNU `gettext'. Other packages have their own ways to internationalization, predating GNU `gettext'. By default, this package will be installed to allow translation of messages. It will automatically detect whether the system already provides the GNU `gettext' functions. If not, the included GNU `gettext' library will be used. This library is wholly contained within this package, usually in the `intl/' subdirectory, so prior installation of the GNU `gettext' package is _not_ required. Installers may use special options at configuration time for changing the default behaviour. The commands: ./configure --with-included-gettext ./configure --disable-nls will, respectively, bypass any pre-existing `gettext' to use the internationalizing routines provided within this package, or else, _totally_ disable translation of messages. When you already have GNU `gettext' installed on your system and run configure without an option for your new package, `configure' will probably detect the previously built and installed `libintl.a' file and will decide to use this. This might not be desirable. You should use the more recent version of the GNU `gettext' library. I.e. if the file `intl/VERSION' shows that the library which comes with this package is more recent, you should use ./configure --with-included-gettext to prevent auto-detection. The configuration process will not test for the `catgets' function and therefore it will not be used. The reason is that even an emulation of `gettext' on top of `catgets' could not provide all the extensions of the GNU `gettext' library. Internationalized packages usually have many `po/LL.po' files, where LL gives an ISO 639 two-letter code identifying the language. Unless translations have been forbidden at `configure' time by using the `--disable-nls' switch, all available translations are installed together with the package. However, the environment variable `LINGUAS' may be set, prior to configuration, to limit the installed set. `LINGUAS' should then contain a space separated list of two-letter codes, stating which languages are allowed. 1.3 Using This Package ====================== As a user, if your language has been installed for this package, you only have to set the `LANG' environment variable to the appropriate `LL_CC' combination. If you happen to have the `LC_ALL' or some other `LC_xxx' environment variables set, you should unset them before setting `LANG', otherwise the setting of `LANG' will not have the desired effect. Here `LL' is an ISO 639 two-letter language code, and `CC' is an ISO 3166 two-letter country code. For example, let's suppose that you speak German and live in Germany. At the shell prompt, merely execute `setenv LANG de_DE' (in `csh'), `export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). This can be done from your `.login' or `.profile' file, once and for all. You might think that the country code specification is redundant. But in fact, some languages have dialects in different countries. For example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The country code serves to distinguish the dialects. The locale naming convention of `LL_CC', with `LL' denoting the language and `CC' denoting the country, is the one use on systems based on GNU libc. On other systems, some variations of this scheme are used, such as `LL' or `LL_CC.ENCODING'. You can get the list of locales supported by your system for your language by running the command `locale -a | grep '^LL''. Not all programs have translations for all languages. By default, an English message is shown in place of a nonexistent translation. If you understand other languages, you can set up a priority list of languages. This is done through a different environment variable, called `LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' for the purpose of message handling, but you still need to have `LANG' set to the primary language; this is required by other parts of the system libraries. For example, some Swedish users who would rather read translations in German than English for when Swedish is not available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. Special advice for Norwegian users: The language code for Norwegian bokma*l changed from `no' to `nb' recently (in 2003). During the transition period, while some message catalogs for this language are installed under `nb' and some older ones under `no', it's recommended for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and older translations are used. In the `LANGUAGE' environment variable, but not in the `LANG' environment variable, `LL_CC' combinations can be abbreviated as `LL' to denote the language's main dialect. For example, `de' is equivalent to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' (Portuguese as spoken in Portugal) in this context. 1.4 Translating Teams ===================== For the Free Translation Project to be a success, we need interested people who like their own language and write it well, and who are also able to synergize with other translators speaking the same language. Each translation team has its own mailing list. The up-to-date list of teams can be found at the Free Translation Project's homepage, `http://translationproject.org/', in the "Teams" area. If you'd like to volunteer to _work_ at translating messages, you should become a member of the translating team for your own language. The subscribing address is _not_ the same as the list itself, it has `-request' appended. For example, speakers of Swedish can send a message to `sv-request@li.org', having this message body: subscribe Keep in mind that team members are expected to participate _actively_ in translations, or at solving translational difficulties, rather than merely lurking around. If your team does not exist yet and you want to start one, or if you are unsure about what to do or how to get started, please write to `coordinator@translationproject.org' to reach the coordinator for all translator teams. The English team is special. It works at improving and uniformizing the terminology in use. Proven linguistic skills are praised more than programming skills, here. 1.5 Available Packages ====================== Languages are not equally supported in all packages. The following matrix shows the current state of internationalization, as of November 2007. The matrix shows, in regard of each package, for which languages PO files have been submitted to translation coordination, with a translation percentage of at least 50%. Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB eo +----------------------------------------------------+ Compendium | [] [] [] [] | a2ps | [] [] [] [] [] | aegis | () | ant-phone | () | anubis | [] | ap-utils | | aspell | [] [] [] [] [] | bash | [] | bfd | | bibshelf | [] | binutils | | bison | [] [] | bison-runtime | [] | bluez-pin | [] [] [] [] [] | cflow | [] | clisp | [] [] [] | console-tools | [] [] | coreutils | [] [] [] [] | cpio | | cpplib | [] [] [] | cryptonit | [] | dialog | | diffutils | [] [] [] [] [] [] | doodle | [] | e2fsprogs | [] [] | enscript | [] [] [] [] | fetchmail | [] [] () [] [] | findutils | [] | findutils_stable | [] [] [] | flex | [] [] [] | fslint | | gas | | gawk | [] [] [] | gcal | [] | gcc | [] | gettext-examples | [] [] [] [] [] | gettext-runtime | [] [] [] [] [] | gettext-tools | [] [] | gip | [] | gliv | [] [] | glunarclock | [] | gmult | [] [] | gnubiff | () | gnucash | [] [] () () [] | gnuedu | | gnulib | [] | gnunet | | gnunet-gtk | | gnutls | [] | gpe-aerial | [] [] | gpe-beam | [] [] | gpe-calendar | | gpe-clock | [] [] | gpe-conf | [] [] | gpe-contacts | | gpe-edit | [] | gpe-filemanager | | gpe-go | [] | gpe-login | [] [] | gpe-ownerinfo | [] [] | gpe-package | | gpe-sketchbook | [] [] | gpe-su | [] [] | gpe-taskmanager | [] [] | gpe-timesheet | [] | gpe-today | [] [] | gpe-todo | | gphoto2 | [] [] [] [] | gprof | [] [] | gpsdrive | | gramadoir | [] [] | grep | [] [] | gretl | () | gsasl | | gss | | gst-plugins-bad | [] [] | gst-plugins-base | [] [] | gst-plugins-good | [] [] [] | gst-plugins-ugly | [] [] | gstreamer | [] [] [] [] [] [] [] | gtick | () | gtkam | [] [] [] [] | gtkorphan | [] [] | gtkspell | [] [] [] [] | gutenprint | [] | hello | [] [] [] [] [] | herrie | [] | hylafax | | idutils | [] [] | indent | [] [] [] [] | iso_15924 | | iso_3166 | [] [] [] [] [] [] [] [] [] [] [] | iso_3166_2 | | iso_4217 | [] [] [] | iso_639 | [] [] [] [] | jpilot | [] | jtag | | jwhois | | kbd | [] [] [] [] | keytouch | [] [] | keytouch-editor | [] | keytouch-keyboa... | [] | latrine | () | ld | [] | leafpad | [] [] [] [] [] | libc | [] [] [] [] | libexif | [] | libextractor | [] | libgpewidget | [] [] [] | libgpg-error | [] | libgphoto2 | [] [] | libgphoto2_port | [] [] | libgsasl | | libiconv | [] [] | libidn | [] [] [] | lifelines | [] () | lilypond | [] | lingoteach | | lprng | | lynx | [] [] [] [] | m4 | [] [] [] [] | mailfromd | | mailutils | [] | make | [] [] | man-db | [] [] [] | minicom | [] [] [] | nano | [] [] [] | opcodes | [] | parted | [] [] | pilot-qof | | popt | [] [] [] | psmisc | [] | pwdutils | | qof | | radius | [] | recode | [] [] [] [] [] [] | rpm | [] | screem | | scrollkeeper | [] [] [] [] [] [] [] [] | sed | [] [] [] | shared-mime-info | [] [] [] [] () [] [] [] | sharutils | [] [] [] [] [] [] | shishi | | skencil | [] () | solfege | | soundtracker | [] [] | sp | [] | system-tools-ba... | [] [] [] [] [] [] [] [] [] | tar | [] [] | texinfo | [] [] [] | tin | () () | tuxpaint | [] [] [] [] [] [] | unicode-han-tra... | | unicode-transla... | | util-linux | [] [] [] [] | util-linux-ng | [] [] [] [] | vorbis-tools | [] | wastesedge | () | wdiff | [] [] [] [] | wget | [] [] [] | xchat | [] [] [] [] [] [] [] | xkeyboard-config | [] | xpad | [] [] [] | +----------------------------------------------------+ af am ar az be bg bs ca cs cy da de el en en_GB eo 6 0 2 1 8 26 2 40 48 2 56 88 15 1 15 18 es et eu fa fi fr ga gl gu he hi hr hu id is it +--------------------------------------------------+ Compendium | [] [] [] [] [] | a2ps | [] [] [] () | aegis | | ant-phone | [] | anubis | [] | ap-utils | [] [] | aspell | [] [] [] | bash | [] | bfd | [] [] | bibshelf | [] [] [] | binutils | [] [] [] | bison | [] [] [] [] [] [] | bison-runtime | [] [] [] [] [] | bluez-pin | [] [] [] [] [] | cflow | [] | clisp | [] [] | console-tools | | coreutils | [] [] [] [] [] [] | cpio | [] [] [] | cpplib | [] [] | cryptonit | [] | dialog | [] [] [] | diffutils | [] [] [] [] [] [] [] [] [] | doodle | [] [] | e2fsprogs | [] [] [] | enscript | [] [] [] | fetchmail | [] | findutils | [] [] [] | findutils_stable | [] [] [] [] | flex | [] [] [] | fslint | | gas | [] [] | gawk | [] [] [] [] () | gcal | [] [] | gcc | [] | gettext-examples | [] [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] | gettext-tools | [] [] [] [] | gip | [] [] [] [] | gliv | () | glunarclock | [] [] [] | gmult | [] [] [] | gnubiff | () () | gnucash | () () () | gnuedu | [] | gnulib | [] [] [] | gnunet | | gnunet-gtk | | gnutls | | gpe-aerial | [] [] | gpe-beam | [] [] | gpe-calendar | | gpe-clock | [] [] [] [] | gpe-conf | [] | gpe-contacts | [] [] | gpe-edit | [] [] [] [] | gpe-filemanager | [] | gpe-go | [] [] [] | gpe-login | [] [] [] | gpe-ownerinfo | [] [] [] [] [] | gpe-package | [] | gpe-sketchbook | [] [] | gpe-su | [] [] [] [] | gpe-taskmanager | [] [] [] | gpe-timesheet | [] [] [] [] | gpe-today | [] [] [] [] | gpe-todo | [] | gphoto2 | [] [] [] [] [] | gprof | [] [] [] [] [] | gpsdrive | [] | gramadoir | [] [] | grep | [] [] [] | gretl | [] [] [] () | gsasl | [] [] | gss | [] [] | gst-plugins-bad | [] [] [] [] | gst-plugins-base | [] [] [] [] | gst-plugins-good | [] [] [] [] [] | gst-plugins-ugly | [] [] [] [] | gstreamer | [] [] [] | gtick | [] [] [] | gtkam | [] [] [] [] | gtkorphan | [] [] | gtkspell | [] [] [] [] [] [] [] | gutenprint | [] | hello | [] [] [] [] [] [] [] [] [] [] [] [] [] | herrie | [] | hylafax | | idutils | [] [] [] [] [] | indent | [] [] [] [] [] [] [] [] [] [] | iso_15924 | [] | iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | iso_3166_2 | [] | iso_4217 | [] [] [] [] [] [] | iso_639 | [] [] [] [] [] [] | jpilot | [] [] | jtag | [] | jwhois | [] [] [] [] [] | kbd | [] [] | keytouch | [] [] [] | keytouch-editor | [] | keytouch-keyboa... | [] [] | latrine | [] [] | ld | [] [] [] [] | leafpad | [] [] [] [] [] [] | libc | [] [] [] [] [] | libexif | [] | libextractor | [] | libgpewidget | [] [] [] [] [] | libgpg-error | [] | libgphoto2 | [] [] [] | libgphoto2_port | [] [] | libgsasl | [] [] | libiconv | [] [] [] | libidn | [] [] | lifelines | () | lilypond | [] [] [] | lingoteach | [] [] [] | lprng | | lynx | [] [] [] | m4 | [] [] [] [] | mailfromd | | mailutils | [] [] | make | [] [] [] [] [] [] [] [] | man-db | [] | minicom | [] [] [] [] | nano | [] [] [] [] [] [] [] | opcodes | [] [] [] [] | parted | [] [] [] | pilot-qof | | popt | [] [] [] [] | psmisc | [] [] | pwdutils | | qof | [] | radius | [] [] | recode | [] [] [] [] [] [] [] [] | rpm | [] [] | screem | | scrollkeeper | [] [] [] | sed | [] [] [] [] [] | shared-mime-info | [] [] [] [] [] [] | sharutils | [] [] [] [] [] [] [] [] | shishi | [] | skencil | [] [] | solfege | [] | soundtracker | [] [] [] | sp | [] | system-tools-ba... | [] [] [] [] [] [] [] [] [] | tar | [] [] [] [] [] | texinfo | [] [] [] | tin | [] () | tuxpaint | [] [] | unicode-han-tra... | | unicode-transla... | [] [] | util-linux | [] [] [] [] [] [] [] | util-linux-ng | [] [] [] [] [] [] [] | vorbis-tools | | wastesedge | () | wdiff | [] [] [] [] [] [] [] [] | wget | [] [] [] [] [] [] [] [] | xchat | [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] [] | xpad | [] [] [] | +--------------------------------------------------+ es et eu fa fi fr ga gl gu he hi hr hu id is it 85 22 14 2 48 101 61 12 2 8 2 6 53 29 1 52 ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn +--------------------------------------------------+ Compendium | [] | a2ps | () [] [] | aegis | () | ant-phone | [] | anubis | [] [] [] | ap-utils | [] | aspell | [] [] | bash | [] | bfd | | bibshelf | [] | binutils | | bison | [] [] [] | bison-runtime | [] [] [] | bluez-pin | [] [] [] | cflow | | clisp | [] | console-tools | | coreutils | [] | cpio | [] | cpplib | [] | cryptonit | [] | dialog | [] [] | diffutils | [] [] [] | doodle | | e2fsprogs | [] | enscript | [] | fetchmail | [] [] | findutils | [] | findutils_stable | [] | flex | [] [] | fslint | | gas | | gawk | [] [] | gcal | | gcc | | gettext-examples | [] [] [] | gettext-runtime | [] [] [] | gettext-tools | [] [] | gip | [] [] | gliv | [] | glunarclock | [] [] | gmult | [] [] [] | gnubiff | | gnucash | () () () | gnuedu | | gnulib | [] [] | gnunet | | gnunet-gtk | | gnutls | [] | gpe-aerial | [] | gpe-beam | [] | gpe-calendar | [] | gpe-clock | [] [] [] | gpe-conf | [] [] [] | gpe-contacts | [] | gpe-edit | [] [] [] | gpe-filemanager | [] [] | gpe-go | [] [] [] | gpe-login | [] [] [] | gpe-ownerinfo | [] [] | gpe-package | [] [] | gpe-sketchbook | [] [] | gpe-su | [] [] [] | gpe-taskmanager | [] [] [] [] | gpe-timesheet | [] | gpe-today | [] [] | gpe-todo | [] | gphoto2 | [] [] | gprof | [] | gpsdrive | [] | gramadoir | () | grep | [] [] | gretl | | gsasl | [] | gss | | gst-plugins-bad | [] | gst-plugins-base | [] | gst-plugins-good | [] | gst-plugins-ugly | [] | gstreamer | [] | gtick | [] | gtkam | [] [] | gtkorphan | [] | gtkspell | [] [] | gutenprint | [] | hello | [] [] [] [] [] [] [] | herrie | [] | hylafax | | idutils | [] | indent | [] [] | iso_15924 | [] | iso_3166 | [] [] [] [] [] [] [] [] | iso_3166_2 | [] | iso_4217 | [] [] [] | iso_639 | [] [] [] [] | jpilot | () () | jtag | | jwhois | [] | kbd | [] | keytouch | [] | keytouch-editor | [] | keytouch-keyboa... | | latrine | [] | ld | | leafpad | [] [] | libc | [] [] [] | libexif | | libextractor | | libgpewidget | [] | libgpg-error | | libgphoto2 | [] | libgphoto2_port | [] | libgsasl | [] | libiconv | [] | libidn | [] [] | lifelines | [] | lilypond | [] | lingoteach | [] | lprng | | lynx | [] [] | m4 | [] [] | mailfromd | | mailutils | | make | [] [] [] | man-db | | minicom | [] | nano | [] [] [] | opcodes | [] | parted | [] [] | pilot-qof | | popt | [] [] [] | psmisc | [] [] [] | pwdutils | | qof | | radius | | recode | [] | rpm | [] [] | screem | [] | scrollkeeper | [] [] [] [] | sed | [] [] | shared-mime-info | [] [] [] [] [] [] [] | sharutils | [] [] | shishi | | skencil | | solfege | () () | soundtracker | | sp | () | system-tools-ba... | [] [] [] [] | tar | [] [] [] | texinfo | [] [] | tin | | tuxpaint | () [] [] | unicode-han-tra... | | unicode-transla... | | util-linux | [] [] | util-linux-ng | [] [] | vorbis-tools | | wastesedge | [] | wdiff | [] [] | wget | [] [] | xchat | [] [] [] [] | xkeyboard-config | [] [] [] | xpad | [] [] [] | +--------------------------------------------------+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn 51 2 25 3 2 0 6 0 2 2 20 0 11 1 103 6 or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta +--------------------------------------------------+ Compendium | [] [] [] [] [] | a2ps | () [] [] [] [] [] [] | aegis | () () | ant-phone | [] [] | anubis | [] [] [] | ap-utils | () | aspell | [] [] [] | bash | [] [] | bfd | | bibshelf | [] | binutils | [] [] | bison | [] [] [] [] [] | bison-runtime | [] [] [] [] [] | bluez-pin | [] [] [] [] [] [] [] [] [] | cflow | [] | clisp | [] | console-tools | [] | coreutils | [] [] [] [] | cpio | [] [] [] | cpplib | [] | cryptonit | [] [] | dialog | [] | diffutils | [] [] [] [] [] [] | doodle | [] [] | e2fsprogs | [] [] | enscript | [] [] [] [] [] | fetchmail | [] [] [] | findutils | [] [] [] | findutils_stable | [] [] [] [] [] [] | flex | [] [] [] [] [] | fslint | [] | gas | | gawk | [] [] [] [] | gcal | [] | gcc | [] [] | gettext-examples | [] [] [] [] [] [] [] [] | gettext-runtime | [] [] [] [] [] [] [] [] | gettext-tools | [] [] [] [] [] [] [] | gip | [] [] [] [] | gliv | [] [] [] [] [] [] | glunarclock | [] [] [] [] [] [] | gmult | [] [] [] [] | gnubiff | () [] | gnucash | () [] | gnuedu | | gnulib | [] [] [] | gnunet | | gnunet-gtk | [] | gnutls | [] [] | gpe-aerial | [] [] [] [] [] [] [] | gpe-beam | [] [] [] [] [] [] [] | gpe-calendar | [] [] [] [] | gpe-clock | [] [] [] [] [] [] [] [] | gpe-conf | [] [] [] [] [] [] [] | gpe-contacts | [] [] [] [] [] | gpe-edit | [] [] [] [] [] [] [] [] [] | gpe-filemanager | [] [] | gpe-go | [] [] [] [] [] [] [] [] | gpe-login | [] [] [] [] [] [] [] [] | gpe-ownerinfo | [] [] [] [] [] [] [] [] | gpe-package | [] [] | gpe-sketchbook | [] [] [] [] [] [] [] [] | gpe-su | [] [] [] [] [] [] [] [] | gpe-taskmanager | [] [] [] [] [] [] [] [] | gpe-timesheet | [] [] [] [] [] [] [] [] | gpe-today | [] [] [] [] [] [] [] [] | gpe-todo | [] [] [] [] | gphoto2 | [] [] [] [] [] [] | gprof | [] [] [] | gpsdrive | [] [] | gramadoir | [] [] | grep | [] [] [] [] | gretl | [] [] [] | gsasl | [] [] [] | gss | [] [] [] [] | gst-plugins-bad | [] [] [] | gst-plugins-base | [] [] | gst-plugins-good | [] [] | gst-plugins-ugly | [] [] [] | gstreamer | [] [] [] [] | gtick | [] | gtkam | [] [] [] [] [] | gtkorphan | [] | gtkspell | [] [] [] [] [] [] [] [] | gutenprint | [] | hello | [] [] [] [] [] [] [] [] | herrie | [] [] [] | hylafax | | idutils | [] [] [] [] [] | indent | [] [] [] [] [] [] [] | iso_15924 | | iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | iso_3166_2 | | iso_4217 | [] [] [] [] [] [] [] | iso_639 | [] [] [] [] [] [] [] | jpilot | | jtag | [] | jwhois | [] [] [] [] | kbd | [] [] [] | keytouch | [] | keytouch-editor | [] | keytouch-keyboa... | [] | latrine | | ld | [] | leafpad | [] [] [] [] [] [] | libc | [] [] [] [] | libexif | [] [] | libextractor | [] [] | libgpewidget | [] [] [] [] [] [] [] [] | libgpg-error | [] [] [] | libgphoto2 | [] | libgphoto2_port | [] [] [] | libgsasl | [] [] [] [] | libiconv | [] [] [] | libidn | [] [] () | lifelines | [] [] | lilypond | | lingoteach | [] | lprng | [] | lynx | [] [] [] | m4 | [] [] [] [] [] | mailfromd | [] | mailutils | [] [] [] | make | [] [] [] [] | man-db | [] [] [] [] | minicom | [] [] [] [] [] | nano | [] [] [] [] | opcodes | [] [] | parted | [] | pilot-qof | | popt | [] [] [] [] | psmisc | [] [] | pwdutils | [] [] | qof | [] [] | radius | [] [] | recode | [] [] [] [] [] [] [] | rpm | [] [] [] [] | screem | | scrollkeeper | [] [] [] [] [] [] [] | sed | [] [] [] [] [] [] [] [] [] | shared-mime-info | [] [] [] [] [] [] | sharutils | [] [] [] [] | shishi | [] | skencil | [] [] [] | solfege | [] | soundtracker | [] [] | sp | | system-tools-ba... | [] [] [] [] [] [] [] [] [] | tar | [] [] [] [] | texinfo | [] [] [] [] | tin | () | tuxpaint | [] [] [] [] [] [] | unicode-han-tra... | | unicode-transla... | | util-linux | [] [] [] [] | util-linux-ng | [] [] [] [] | vorbis-tools | [] | wastesedge | | wdiff | [] [] [] [] [] [] [] | wget | [] [] [] [] | xchat | [] [] [] [] [] [] [] | xkeyboard-config | [] [] [] | xpad | [] [] [] | +--------------------------------------------------+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta 0 5 77 31 53 4 58 72 3 45 46 9 45 122 3 tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu +---------------------------------------------------+ Compendium | [] [] [] [] | 19 a2ps | [] [] [] | 19 aegis | [] | 1 ant-phone | [] [] | 6 anubis | [] [] [] | 11 ap-utils | () [] | 4 aspell | [] [] [] | 16 bash | [] | 6 bfd | | 2 bibshelf | [] | 7 binutils | [] [] [] [] | 9 bison | [] [] [] [] | 20 bison-runtime | [] [] [] [] | 18 bluez-pin | [] [] [] [] [] [] | 28 cflow | [] [] | 5 clisp | | 9 console-tools | [] [] | 5 coreutils | [] [] [] | 18 cpio | [] [] [] [] | 11 cpplib | [] [] [] [] [] | 12 cryptonit | [] | 6 dialog | [] [] [] | 9 diffutils | [] [] [] [] [] | 29 doodle | [] | 6 e2fsprogs | [] [] | 10 enscript | [] [] [] | 16 fetchmail | [] [] | 12 findutils | [] [] [] | 11 findutils_stable | [] [] [] [] | 18 flex | [] [] | 15 fslint | [] | 2 gas | [] | 3 gawk | [] [] [] | 16 gcal | [] | 5 gcc | [] [] [] | 7 gettext-examples | [] [] [] [] [] [] | 29 gettext-runtime | [] [] [] [] [] [] | 28 gettext-tools | [] [] [] [] [] | 20 gip | [] [] | 13 gliv | [] [] | 11 glunarclock | [] [] [] | 15 gmult | [] [] [] [] | 16 gnubiff | [] | 2 gnucash | () [] | 5 gnuedu | [] | 2 gnulib | [] | 10 gnunet | | 0 gnunet-gtk | [] [] | 3 gnutls | | 4 gpe-aerial | [] [] | 14 gpe-beam | [] [] | 14 gpe-calendar | [] [] | 7 gpe-clock | [] [] [] [] | 21 gpe-conf | [] [] [] | 16 gpe-contacts | [] [] | 10 gpe-edit | [] [] [] [] [] | 22 gpe-filemanager | [] [] | 7 gpe-go | [] [] [] [] | 19 gpe-login | [] [] [] [] [] | 21 gpe-ownerinfo | [] [] [] [] | 21 gpe-package | [] | 6 gpe-sketchbook | [] [] | 16 gpe-su | [] [] [] [] | 21 gpe-taskmanager | [] [] [] [] | 21 gpe-timesheet | [] [] [] [] | 18 gpe-today | [] [] [] [] [] | 21 gpe-todo | [] [] | 8 gphoto2 | [] [] [] [] | 21 gprof | [] [] | 13 gpsdrive | [] | 5 gramadoir | [] | 7 grep | [] | 12 gretl | | 6 gsasl | [] [] [] | 9 gss | [] | 7 gst-plugins-bad | [] [] [] | 13 gst-plugins-base | [] [] | 11 gst-plugins-good | [] [] [] [] [] | 16 gst-plugins-ugly | [] [] [] | 13 gstreamer | [] [] [] | 18 gtick | [] [] | 7 gtkam | [] | 16 gtkorphan | [] | 7 gtkspell | [] [] [] [] [] [] | 27 gutenprint | | 4 hello | [] [] [] [] [] | 38 herrie | [] [] | 8 hylafax | | 0 idutils | [] [] | 15 indent | [] [] [] [] [] | 28 iso_15924 | [] [] | 4 iso_3166 | [] [] [] [] [] [] [] [] [] | 54 iso_3166_2 | [] [] | 4 iso_4217 | [] [] [] [] [] | 24 iso_639 | [] [] [] [] [] | 26 jpilot | [] [] [] [] | 7 jtag | [] | 3 jwhois | [] [] [] | 13 kbd | [] [] [] | 13 keytouch | [] | 8 keytouch-editor | [] | 5 keytouch-keyboa... | [] | 5 latrine | [] [] | 5 ld | [] [] [] [] | 10 leafpad | [] [] [] [] [] | 24 libc | [] [] [] | 19 libexif | [] | 5 libextractor | [] | 5 libgpewidget | [] [] [] | 20 libgpg-error | [] | 6 libgphoto2 | [] [] | 9 libgphoto2_port | [] [] [] | 11 libgsasl | [] | 8 libiconv | [] [] | 11 libidn | [] [] | 11 lifelines | | 4 lilypond | [] | 6 lingoteach | [] | 6 lprng | [] | 2 lynx | [] [] [] | 15 m4 | [] [] [] | 18 mailfromd | [] [] | 3 mailutils | [] [] | 8 make | [] [] [] | 20 man-db | [] | 9 minicom | [] | 14 nano | [] [] [] | 20 opcodes | [] [] | 10 parted | [] [] [] | 11 pilot-qof | [] | 1 popt | [] [] [] [] | 18 psmisc | [] [] | 10 pwdutils | [] | 3 qof | [] | 4 radius | [] [] | 7 recode | [] [] [] | 25 rpm | [] [] [] [] | 13 screem | [] | 2 scrollkeeper | [] [] [] [] | 26 sed | [] [] [] [] | 23 shared-mime-info | [] [] [] | 29 sharutils | [] [] [] | 23 shishi | [] | 3 skencil | [] | 7 solfege | [] | 3 soundtracker | [] [] | 9 sp | [] | 3 system-tools-ba... | [] [] [] [] [] [] [] | 38 tar | [] [] [] | 17 texinfo | [] [] [] | 15 tin | | 1 tuxpaint | [] [] [] | 19 unicode-han-tra... | | 0 unicode-transla... | | 2 util-linux | [] [] [] | 20 util-linux-ng | [] [] [] | 20 vorbis-tools | [] [] | 4 wastesedge | | 1 wdiff | [] [] | 23 wget | [] [] [] | 20 xchat | [] [] [] [] | 29 xkeyboard-config | [] [] [] | 14 xpad | [] [] [] | 15 +---------------------------------------------------+ 76 teams tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu 163 domains 0 3 1 74 51 0 143 21 1 57 7 45 0 2036 Some counters in the preceding matrix are higher than the number of visible blocks let us expect. This is because a few extra PO files are used for implementing regional variants of languages, or language dialects. For a PO file in the matrix above to be effective, the package to which it applies should also have been internationalized and distributed as such by its maintainer. There might be an observable lag between the mere existence a PO file and its wide availability in a distribution. If November 2007 seems to be old, you may fetch a more recent copy of this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix with full percentage details can be found at `http://translationproject.org/extra/matrix.html'. 1.6 Using `gettext' in new packages =================================== If you are writing a freely available program and want to internationalize it you are welcome to use GNU `gettext' in your package. Of course you have to respect the GNU Library General Public License which covers the use of the GNU `gettext' library. This means in particular that even non-free programs can use `libintl' as a shared library, whereas only free software can use `libintl' as a static library or use modified versions of `libintl'. Once the sources are changed appropriately and the setup can handle the use of `gettext' the only thing missing are the translations. The Free Translation Project is also available for packages which are not developed inside the GNU project. Therefore the information given above applies also for every other Free Software Project. Contact `coordinator@translationproject.org' to make the `.pot' files available to the translation teams. opendbx-1.4.6/depcomp0000755000175000017500000004426711425153451011475 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2009-04-28.21; # UTC # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free # Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then # This is just like msvisualcpp but w/o cygpath translation. # Just convert the backslash-escaped backslashes to single forward # slashes to satisfy depend.m4 cygpath_u="sed s,\\\\\\\\,/,g" depmode=msvisualcpp fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> "$depfile" echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${ s/^ *// s/ \\*$// s/$/:/ p }' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift cleared=no eat=no for arg do case $cleared in no) set ""; shift cleared=yes ;; esac if test $eat = yes; then eat=no continue fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -arch) eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test "X$1" != 'X--mode=compile'; do shift done shift fi IFS=" " for arg do case "$arg" in -o) shift ;; $object) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; msvcmsys) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-time-zone: "UTC" # time-stamp-end: "; # UTC" # End: opendbx-1.4.6/configure0000755000175000017500000255544311765211277012044 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.65 for opendbx 1.4.6. # # Report bugs to . # # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and $0: http://bugs.linuxnetworks.de/ about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$lt_ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac ECHO=${lt_ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then # Yippee, $ECHO works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <<_LT_EOF $* _LT_EOF exit 0 fi # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test -z "$lt_ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if { echo_test_string=`eval $cmd`; } 2>/dev/null && { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null then break fi done fi if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$ECHO" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. ECHO='print -r' elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. ECHO='printf %s\n' if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL ECHO="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then ECHO="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. ECHO=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. lt_ECHO=$ECHO if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='opendbx' PACKAGE_TARNAME='opendbx' PACKAGE_VERSION='1.4.6' PACKAGE_STRING='opendbx 1.4.6' PACKAGE_BUGREPORT='http://bugs.linuxnetworks.de/' PACKAGE_URL='' ac_unique_file="config.h.in" gt_needs= # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS LIBSYBASE LIBSQLITE3 LIBSQLITE LIBPGSQL LIBORACLE LIBODBC LIBMYSQL LIBMSSQL LIBFIREBIRD backendlibs backends ENABLEUTILS_FALSE ENABLEUTILS_TRUE ENABLETEST_FALSE ENABLETEST_TRUE SINGLELIB_FALSE SINGLELIB_TRUE ENABLEMAN_FALSE ENABLEMAN_TRUE doxygen db2man MAINLIBS POW_LIB LIBOBJS CXXCPP am__fastdepCXX_FALSE am__fastdepCXX_TRUE CXXDEPMODE ac_ct_CXX CXXFLAGS CXX CPP OTOOL64 OTOOL LIPO NMEDIT DSYMUTIL lt_ECHO RANLIB AR LN_S NM ac_ct_DUMPBIN DUMPBIN LD FGREP EGREP GREP SED LIBTOOL OBJDUMP DLLTOOL AS LIBSUFFIX LIBPREFIX LIBVERSION APIPLUSVERSION APINUMBER APIVERSION POSUB LTLIBINTL LIBINTL INTLLIBS LTLIBICONV LIBICONV INTL_MACOSX_LIBS host_os host_vendor host_cpu host build_os build_vendor build_cpu build am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC XGETTEXT_EXTRA_OPTIONS MSGMERGE XGETTEXT_015 XGETTEXT GMSGFMT_015 MSGFMT_015 GMSGFMT MSGFMT GETTEXT_MACRO_VERSION USE_NLS MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_maintainer_mode enable_nls enable_dependency_tracking with_gnu_ld enable_rpath with_libiconv_prefix with_libintl_prefix enable_shared enable_static with_pic enable_fast_install enable_libtool_lock enable_singlelib enable_test enable_utils with_backends ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP CXX CXXFLAGS CCC CXXCPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error "unrecognized option: \`$ac_option' Try \`$0 --help' for more information." ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures opendbx 1.4.6 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/opendbx] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of opendbx 1.4.6:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --disable-nls do not use Native Language Support --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --disable-rpath do not hardcode runtime library paths --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) --enable-singlelib build single library including backends --disable-test don't build OpenDBX test applications --disable-utils don't build OpenDBX utility applications Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-gnu-ld assume the C compiler uses GNU ld default=no --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib --without-libintl-prefix don't search for libintl in includedir and libdir --with-pic try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-backends=... compile listed backends Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor CXX C++ compiler command CXXFLAGS C++ compiler flags CXXCPP C++ preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF opendbx configure 1.4.6 generated by GNU Autoconf 2.65 Copyright (C) 2009 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_link # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_func # ac_fn_cxx_try_compile LINENO # ---------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_cxx_try_compile # ac_fn_cxx_try_cpp LINENO # ------------------------ # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } >/dev/null && { test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_cxx_try_cpp # ac_fn_cxx_try_link LINENO # ------------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_cxx_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_cxx_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} as_fn_set_status $ac_retval } # ac_fn_cxx_try_link # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_type # ac_fn_c_find_intX_t LINENO BITS VAR # ----------------------------------- # Finds a signed integer type with width BITS, setting cache variable VAR # accordingly. ac_fn_c_find_intX_t () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 $as_echo_n "checking for int$2_t... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=no" # Order is important - never check a type that is potentially smaller # than half of the expected target width. for ac_type in int$2_t 'int' 'long int' \ 'long long int' 'short int' 'signed char'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default enum { N = $2 / 2 - 1 }; int main () { static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default enum { N = $2 / 2 - 1 }; int main () { static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else case $ac_type in #( int$2_t) : eval "$3=yes" ;; #( *) : eval "$3=\$ac_type" ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext eval as_val=\$$3 if test "x$as_val" = x""no; then : else break fi done fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_find_intX_t # ac_fn_c_find_uintX_t LINENO BITS VAR # ------------------------------------ # Finds an unsigned integer type with width BITS, setting cache variable VAR # accordingly. ac_fn_c_find_uintX_t () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 $as_echo_n "checking for uint$2_t... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=no" # Order is important - never check a type that is potentially smaller # than half of the expected target width. for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : case $ac_type in #( uint$2_t) : eval "$3=yes" ;; #( *) : eval "$3=\$ac_type" ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext eval as_val=\$$3 if test "x$as_val" = x""no; then : else break fi done fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_find_uintX_t # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( cat <<\_ASBOX ## -------------------------------------------- ## ## Report this to http://bugs.linuxnetworks.de/ ## ## -------------------------------------------- ## _ASBOX ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_mongrel # ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES # ---------------------------------------------------- # Tries to find if the field MEMBER exists in type AGGR, after including # INCLUDES, setting cache variable VAR accordingly. ac_fn_c_check_member () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 $as_echo_n "checking for $2.$3... " >&6; } if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int main () { static $2 ac_aggr; if (ac_aggr.$3) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$4=yes" else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int main () { static $2 ac_aggr; if (sizeof ac_aggr.$3) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$4=yes" else eval "$4=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$4 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_member cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by opendbx $as_me 1.4.6, which was generated by GNU Autoconf 2.65. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi gt_needs="$gt_needs " # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers config.h" am__api_version='1.11' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do for ac_t in install-sh install.sh shtool; do if test -f "$ac_dir/$ac_t"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/$ac_t -c" break 2 fi done done if test -z "$ac_aux_dir"; then as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file ) then # Ok. : else as_fn_error "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='opendbx' VERSION='1.4.6' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 $as_echo_n "checking whether NLS is requested... " >&6; } # Check whether --enable-nls was given. if test "${enable_nls+set}" = set; then : enableval=$enable_nls; USE_NLS=$enableval else USE_NLS=yes fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } GETTEXT_MACRO_VERSION=0.17 # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$MSGFMT" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test "$MSGFMT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 $as_echo "$MSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_GMSGFMT+set}" = set; then : $as_echo_n "(cached) " >&6 else case $GMSGFMT in [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT=$ac_cv_path_GMSGFMT if test -n "$GMSGFMT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 $as_echo "$GMSGFMT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; *) MSGFMT_015=$MSGFMT ;; esac case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; *) GMSGFMT_015=$GMSGFMT ;; esac # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_XGETTEXT+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$XGETTEXT" in [\\/]* | ?:[\\/]*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test "$XGETTEXT" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 $as_echo "$XGETTEXT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi rm -f messages.po case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; *) XGETTEXT_015=$XGETTEXT ;; esac # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi # Find out how to test for executable files. Don't use a zero-byte file, # as systems may use methods other than mode bits to determine executability. cat >conf$$.file <<_ASEOF #! /bin/sh exit 0 _ASEOF chmod +x conf$$.file if test -x conf$$.file >/dev/null 2>&1; then ac_executable_p="test -x" else ac_executable_p="test -f" fi rm -f conf$$.file # Extract the first word of "msgmerge", so it can be a program name with args. set dummy msgmerge; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_path_MSGMERGE+set}" = set; then : $as_echo_n "(cached) " >&6 else case "$MSGMERGE" in [\\/]* | ?:[\\/]*) ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. ;; *) ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$ac_save_IFS" test -z "$ac_dir" && ac_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then echo "$as_me: trying $ac_dir/$ac_word..." >&5 if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" break 2 fi fi done done IFS="$ac_save_IFS" test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" ;; esac fi MSGMERGE="$ac_cv_path_MSGMERGE" if test "$MSGMERGE" != ":"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 $as_echo "$MSGMERGE" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$localedir" || localedir='${datadir}/locale' test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= ac_config_commands="$ac_config_commands po-directories" if test "X$prefix" = "XNONE"; then acl_final_prefix="$ac_default_prefix" else acl_final_prefix="$prefix" fi if test "X$exec_prefix" = "XNONE"; then acl_final_exec_prefix='${prefix}' else acl_final_exec_prefix="$exec_prefix" fi acl_save_prefix="$prefix" prefix="$acl_final_prefix" eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" prefix="$acl_save_prefix" DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "no acceptable C compiler found in \$PATH See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "C compiler cannot create executables See \`config.log' for more details." "$LINENO" 5; }; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of object files: cannot compile See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if test "${ac_cv_build+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if test "${ac_cv_host+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi # Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5 $as_echo_n "checking for ld used by GCC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${acl_cv_path_LD+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then acl_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in *GNU* | *'with BFD'*) test "$with_gnu_ld" != no && break ;; *) test "$with_gnu_ld" != yes && break ;; esac fi done IFS="$ac_save_ifs" else acl_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$acl_cv_path_LD" if test -n "$LD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${acl_cv_prog_gnu_ld+set}" = set; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. case `$LD -v 2>&1 &5 $as_echo "$acl_cv_prog_gnu_ld" >&6; } with_gnu_ld=$acl_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 $as_echo_n "checking for shared library run path origin... " >&6; } if test "${acl_cv_rpath+set}" = set; then : $as_echo_n "(cached) " >&6 else CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh . ./conftest.sh rm -f ./conftest.sh acl_cv_rpath=done fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 $as_echo "$acl_cv_rpath" >&6; } wl="$acl_cv_wl" acl_libext="$acl_cv_libext" acl_shlibext="$acl_cv_shlibext" acl_libname_spec="$acl_cv_libname_spec" acl_library_names_spec="$acl_cv_library_names_spec" acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" acl_hardcode_direct="$acl_cv_hardcode_direct" acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" # Check whether --enable-rpath was given. if test "${enable_rpath+set}" = set; then : enableval=$enable_rpath; : else enable_rpath=yes fi acl_libdirstem=lib searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` if test -n "$searchpath"; then acl_save_IFS="${IFS= }"; IFS=":" for searchdir in $searchpath; do if test -d "$searchdir"; then case "$searchdir" in */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; *) searchdir=`cd "$searchdir" && pwd` case "$searchdir" in */lib64 ) acl_libdirstem=lib64 ;; esac ;; esac fi done IFS="$acl_save_IFS" fi use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libiconv-prefix was given. if test "${with_libiconv_prefix+set}" = set; then : withval=$with_libiconv_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi fi LIBICONV= LTLIBICONV= INCICONV= LIBICONV_PREFIX= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='iconv ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" else : fi else found_dir= found_la= found_so= found_a= eval libname=\"$acl_libname_spec\" # typically: libname=lib$name if test -n "$acl_shlibext"; then shrext=".$acl_shlibext" # typically: shrext=.so else shrext= fi if test $use_additional = yes; then dir="$additional_libdir" if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$acl_hardcode_direct" = yes; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" fi if test "$acl_hardcode_minus_L" != no; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" else LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` LIBICONV_PREFIX="$basedir" additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBICONV; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" ;; esac done fi else LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$acl_hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" done fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 $as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then : $as_echo_n "(cached) " >&6 else gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { CFPreferencesCopyAppValue(NULL, NULL) ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_CFPreferencesCopyAppValue=yes else gt_cv_func_CFPreferencesCopyAppValue=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$gt_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 $as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then $as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 $as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then : $as_echo_n "(cached) " >&6 else gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { CFLocaleCopyCurrent(); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : gt_cv_func_CFLocaleCopyCurrent=yes else gt_cv_func_CFLocaleCopyCurrent=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$gt_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 $as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } if test $gt_cv_func_CFLocaleCopyCurrent = yes; then $as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h fi INTL_MACOSX_LIBS= if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" fi LIBINTL= LTLIBINTL= POSUB= case " $gt_needs " in *" need-formatstring-macros "*) gt_api_version=3 ;; *" need-ngettext "*) gt_api_version=2 ;; *) gt_api_version=1 ;; esac gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" if test "$USE_NLS" = "yes"; then gt_use_preinstalled_gnugettext=no if test $gt_api_version -ge 3; then gt_revision_test_code=' #ifndef __GNU_GETTEXT_SUPPORTED_REVISION #define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) #endif typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; ' else gt_revision_test_code= fi if test $gt_api_version -ge 2; then gt_expression_test_code=' + * ngettext ("", "", 0)' else gt_expression_test_code= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 $as_echo_n "checking for GNU gettext in libc... " >&6; } if { as_var=$gt_func_gnugettext_libc; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include $gt_revision_test_code extern int _nl_msg_cat_cntr; extern int *_nl_domain_bindings; int main () { bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$gt_func_gnugettext_libc=yes" else eval "$gt_func_gnugettext_libc=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$gt_func_gnugettext_libc { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 $as_echo_n "checking for iconv... " >&6; } if test "${am_cv_func_iconv+set}" = set; then : $as_echo_n "(cached) " >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_func_iconv=yes fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_lib_iconv=yes am_cv_func_iconv=yes fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 $as_echo "$am_cv_func_iconv" >&6; } if test "$am_cv_func_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 $as_echo_n "checking for working iconv... " >&6; } if test "${am_cv_func_iconv_works+set}" = set; then : $as_echo_n "(cached) " >&6 else am_save_LIBS="$LIBS" if test $am_cv_lib_iconv = yes; then LIBS="$LIBS $LIBICONV" fi if test "$cross_compiling" = yes; then : case "$host_os" in aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; *) am_cv_func_iconv_works="guessing yes" ;; esac else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { /* Test against AIX 5.1 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); if (cd_utf8_to_88591 != (iconv_t)(-1)) { static const char input[] = "\342\202\254"; /* EURO SIGN */ char buf[10]; const char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_utf8_to_88591, (char **) &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) return 1; } } #if 0 /* This bug could be worked around by the caller. */ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ { iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; char buf[50]; const char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_88591_to_utf8, (char **) &inptr, &inbytesleft, &outptr, &outbytesleft); if ((int)res > 0) return 1; } } #endif /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is provided. */ if (/* Try standardized names. */ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) /* Try IRIX, OSF/1 names. */ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) /* Try AIX names. */ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) /* Try HP-UX names. */ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) return 1; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : am_cv_func_iconv_works=yes else am_cv_func_iconv_works=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi LIBS="$am_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 $as_echo "$am_cv_func_iconv_works" >&6; } case "$am_cv_func_iconv_works" in *no) am_func_iconv=no am_cv_lib_iconv=no ;; *) am_func_iconv=yes ;; esac else am_func_iconv=no am_cv_lib_iconv=no fi if test "$am_func_iconv" = yes; then $as_echo "#define HAVE_ICONV 1" >>confdefs.h fi if test "$am_cv_lib_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 $as_echo_n "checking how to link with libiconv... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 $as_echo "$LIBICONV" >&6; } else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi use_additional=yes acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" # Check whether --with-libintl-prefix was given. if test "${with_libintl_prefix+set}" = set; then : withval=$with_libintl_prefix; if test "X$withval" = "Xno"; then use_additional=no else if test "X$withval" = "X"; then acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval additional_includedir=\"$includedir\" eval additional_libdir=\"$libdir\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" else additional_includedir="$withval/include" additional_libdir="$withval/$acl_libdirstem" fi fi fi LIBINTL= LTLIBINTL= INCINTL= LIBINTL_PREFIX= rpathdirs= ltrpathdirs= names_already_handled= names_next_round='intl ' while test -n "$names_next_round"; do names_this_round="$names_next_round" names_next_round= for name in $names_this_round; do already_handled= for n in $names_already_handled; do if test "$n" = "$name"; then already_handled=yes break fi done if test -z "$already_handled"; then names_already_handled="$names_already_handled $name" uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` eval value=\"\$HAVE_LIB$uppername\" if test -n "$value"; then if test "$value" = yes; then eval value=\"\$LIB$uppername\" test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" eval value=\"\$LTLIB$uppername\" test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" else : fi else found_dir= found_la= found_so= found_a= eval libname=\"$acl_libname_spec\" # typically: libname=lib$name if test -n "$acl_shlibext"; then shrext=".$acl_shlibext" # typically: shrext=.so else shrext= fi if test $use_additional = yes; then dir="$additional_libdir" if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi fi if test "X$found_dir" = "X"; then for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" case "$x" in -L*) dir=`echo "X$x" | sed -e 's/^X-L//'` if test -n "$acl_shlibext"; then if test -f "$dir/$libname$shrext"; then found_dir="$dir" found_so="$dir/$libname$shrext" else if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then ver=`(cd "$dir" && \ for f in "$libname$shrext".*; do echo "$f"; done \ | sed -e "s,^$libname$shrext\\\\.,," \ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ | sed 1q ) 2>/dev/null` if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then found_dir="$dir" found_so="$dir/$libname$shrext.$ver" fi else eval library_names=\"$acl_library_names_spec\" for f in $library_names; do if test -f "$dir/$f"; then found_dir="$dir" found_so="$dir/$f" break fi done fi fi fi if test "X$found_dir" = "X"; then if test -f "$dir/$libname.$acl_libext"; then found_dir="$dir" found_a="$dir/$libname.$acl_libext" fi fi if test "X$found_dir" != "X"; then if test -f "$dir/$libname.la"; then found_la="$dir/$libname.la" fi fi ;; esac if test "X$found_dir" != "X"; then break fi done fi if test "X$found_dir" != "X"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" if test "X$found_so" != "X"; then if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else haveit= for x in $ltrpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $found_dir" fi if test "$acl_hardcode_direct" = yes; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" haveit= for x in $rpathdirs; do if test "X$x" = "X$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $found_dir" fi else haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$found_dir"; then haveit=yes break fi done if test -z "$haveit"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" fi if test "$acl_hardcode_minus_L" != no; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" fi fi fi fi else if test "X$found_a" != "X"; then LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" else LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" fi fi additional_includedir= case "$found_dir" in */$acl_libdirstem | */$acl_libdirstem/) basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` LIBINTL_PREFIX="$basedir" additional_includedir="$basedir/include" ;; esac if test "X$additional_includedir" != "X"; then if test "X$additional_includedir" != "X/usr/include"; then haveit= if test "X$additional_includedir" = "X/usr/local/include"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then for x in $CPPFLAGS $INCINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-I$additional_includedir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_includedir"; then INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" fi fi fi fi fi if test -n "$found_la"; then save_libdir="$libdir" case "$found_la" in */* | *\\*) . "$found_la" ;; *) . "./$found_la" ;; esac libdir="$save_libdir" for dep in $dependency_libs; do case "$dep" in -L*) additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then haveit= if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then if test -n "$GCC"; then case $host_os in linux* | gnu* | k*bsd*-gnu) haveit=yes;; esac fi fi if test -z "$haveit"; then haveit= for x in $LDFLAGS $LIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" fi fi haveit= for x in $LDFLAGS $LTLIBINTL; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X-L$additional_libdir"; then haveit=yes break fi done if test -z "$haveit"; then if test -d "$additional_libdir"; then LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" fi fi fi fi ;; -R*) dir=`echo "X$dep" | sed -e 's/^X-R//'` if test "$enable_rpath" != no; then haveit= for x in $rpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then rpathdirs="$rpathdirs $dir" fi haveit= for x in $ltrpathdirs; do if test "X$x" = "X$dir"; then haveit=yes break fi done if test -z "$haveit"; then ltrpathdirs="$ltrpathdirs $dir" fi fi ;; -l*) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` ;; *.la) names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` ;; *) LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" ;; esac done fi else LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" fi fi fi done done if test "X$rpathdirs" != "X"; then if test -n "$acl_hardcode_libdir_separator"; then alldirs= for found_dir in $rpathdirs; do alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" done acl_save_libdir="$libdir" libdir="$alldirs" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" else for found_dir in $rpathdirs; do acl_save_libdir="$libdir" libdir="$found_dir" eval flag=\"$acl_hardcode_libdir_flag_spec\" libdir="$acl_save_libdir" LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" done fi fi if test "X$ltrpathdirs" != "X"; then for found_dir in $ltrpathdirs; do LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" done fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 $as_echo_n "checking for GNU gettext in libintl... " >&6; } if { as_var=$gt_func_gnugettext_libintl; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else gt_save_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $INCINTL" gt_save_LIBS="$LIBS" LIBS="$LIBS $LIBINTL" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include $gt_revision_test_code extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); int main () { bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$gt_func_gnugettext_libintl=yes" else eval "$gt_func_gnugettext_libintl=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then LIBS="$LIBS $LIBICONV" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include $gt_revision_test_code extern int _nl_msg_cat_cntr; extern #ifdef __cplusplus "C" #endif const char *_nl_expand_alias (const char *); int main () { bindtextdomain ("", ""); return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : LIBINTL="$LIBINTL $LIBICONV" LTLIBINTL="$LTLIBINTL $LTLIBICONV" eval "$gt_func_gnugettext_libintl=yes" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi CPPFLAGS="$gt_save_CPPFLAGS" LIBS="$gt_save_LIBS" fi eval ac_res=\$$gt_func_gnugettext_libintl { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ && test "$PACKAGE" != gettext-runtime \ && test "$PACKAGE" != gettext-tools; }; then gt_use_preinstalled_gnugettext=yes else LIBINTL= LTLIBINTL= INCINTL= fi if test -n "$INTL_MACOSX_LIBS"; then if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" fi fi if test "$gt_use_preinstalled_gnugettext" = "yes" \ || test "$nls_cv_use_gnu_gettext" = "yes"; then $as_echo "#define ENABLE_NLS 1" >>confdefs.h else USE_NLS=no fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 $as_echo_n "checking whether to use NLS... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 $as_echo "$USE_NLS" >&6; } if test "$USE_NLS" = "yes"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 $as_echo_n "checking where the gettext function comes from... " >&6; } if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then gt_source="external libintl" else gt_source="libc" fi else gt_source="included intl directory" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 $as_echo "$gt_source" >&6; } fi if test "$USE_NLS" = "yes"; then if test "$gt_use_preinstalled_gnugettext" = "yes"; then if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 $as_echo_n "checking how to link with libintl... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 $as_echo "$LIBINTL" >&6; } for element in $INCINTL; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done fi $as_echo "#define HAVE_GETTEXT 1" >>confdefs.h $as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h fi POSUB=po fi INTLLIBS="$LIBINTL" am_save_CPPFLAGS="$CPPFLAGS" for element in $INCICONV; do haveit= for x in $CPPFLAGS; do acl_save_prefix="$prefix" prefix="$acl_final_prefix" acl_save_exec_prefix="$exec_prefix" exec_prefix="$acl_final_exec_prefix" eval x=\"$x\" exec_prefix="$acl_save_exec_prefix" prefix="$acl_save_prefix" if test "X$x" = "X$element"; then haveit=yes break fi done if test -z "$haveit"; then CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 $as_echo_n "checking for iconv... " >&6; } if test "${am_cv_func_iconv+set}" = set; then : $as_echo_n "(cached) " >&6 else am_cv_func_iconv="no, consider installing GNU libiconv" am_cv_lib_iconv=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_func_iconv=yes fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test "$am_cv_func_iconv" != yes; then am_save_LIBS="$LIBS" LIBS="$LIBS $LIBICONV" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { iconv_t cd = iconv_open("",""); iconv(cd,NULL,NULL,NULL,NULL); iconv_close(cd); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : am_cv_lib_iconv=yes am_cv_func_iconv=yes fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS="$am_save_LIBS" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 $as_echo "$am_cv_func_iconv" >&6; } if test "$am_cv_func_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 $as_echo_n "checking for working iconv... " >&6; } if test "${am_cv_func_iconv_works+set}" = set; then : $as_echo_n "(cached) " >&6 else am_save_LIBS="$LIBS" if test $am_cv_lib_iconv = yes; then LIBS="$LIBS $LIBICONV" fi if test "$cross_compiling" = yes; then : case "$host_os" in aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; *) am_cv_func_iconv_works="guessing yes" ;; esac else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { /* Test against AIX 5.1 bug: Failures are not distinguishable from successful returns. */ { iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); if (cd_utf8_to_88591 != (iconv_t)(-1)) { static const char input[] = "\342\202\254"; /* EURO SIGN */ char buf[10]; const char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_utf8_to_88591, (char **) &inptr, &inbytesleft, &outptr, &outbytesleft); if (res == 0) return 1; } } #if 0 /* This bug could be worked around by the caller. */ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ { iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); if (cd_88591_to_utf8 != (iconv_t)(-1)) { static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; char buf[50]; const char *inptr = input; size_t inbytesleft = strlen (input); char *outptr = buf; size_t outbytesleft = sizeof (buf); size_t res = iconv (cd_88591_to_utf8, (char **) &inptr, &inbytesleft, &outptr, &outbytesleft); if ((int)res > 0) return 1; } } #endif /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is provided. */ if (/* Try standardized names. */ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) /* Try IRIX, OSF/1 names. */ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) /* Try AIX names. */ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) /* Try HP-UX names. */ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) return 1; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : am_cv_func_iconv_works=yes else am_cv_func_iconv_works=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi LIBS="$am_save_LIBS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 $as_echo "$am_cv_func_iconv_works" >&6; } case "$am_cv_func_iconv_works" in *no) am_func_iconv=no am_cv_lib_iconv=no ;; *) am_func_iconv=yes ;; esac else am_func_iconv=no am_cv_lib_iconv=no fi if test "$am_func_iconv" = yes; then $as_echo "#define HAVE_ICONV 1" >>confdefs.h fi if test "$am_cv_lib_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 $as_echo_n "checking how to link with libiconv... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 $as_echo "$LIBICONV" >&6; } else CPPFLAGS="$am_save_CPPFLAGS" LIBICONV= LTLIBICONV= fi if test "$am_cv_func_iconv" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5 $as_echo_n "checking for iconv declaration... " >&6; } if test "${am_cv_proto_iconv+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include extern #ifdef __cplusplus "C" #endif #if defined(__STDC__) || defined(__cplusplus) size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); #else size_t iconv(); #endif int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : am_cv_proto_iconv_arg1="" else am_cv_proto_iconv_arg1="const" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);" fi am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ac_t:- }$am_cv_proto_iconv" >&5 $as_echo "${ac_t:- }$am_cv_proto_iconv" >&6; } cat >>confdefs.h <<_ACEOF #define ICONV_CONST $am_cv_proto_iconv_arg1 _ACEOF fi # Library setup APIVERSION="3:0:2" APINUMBER="10200" APIPLUSVERSION="1:0:0" LIBVERSION=`echo $VERSION. | sed -e 's/[^0-9.]//g; s/\./ /g; s/ \([0-9]\) / 0\\1 /g; s/ //g'` # Environment specific settings LIBPREFIX="lib" LIBSUFFIX=".so" case "$host" in *-*-cygwin*) LIBPREFIX="cyg" LIBSUFFIX="-1.dll" ;; *-*-mingw* | *-*-pw32*) LIBSUFFIX="-1.dll" $as_echo "#define WIN32 1" >>confdefs.h ;; esac # Libtool settings case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; esac macro_version='2.2.6b' macro_revision='1.3017' ltmain="$ac_aux_dir/ltmain.sh" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } if test "${ac_cv_path_SED+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed { ac_script=; unset ac_script;} if test -z "$SED"; then ac_path_SED_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo '' >> "conftest.nl" "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_SED_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_SED="$ac_path_SED" ac_path_SED_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_SED_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_SED"; then as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi else ac_cv_path_SED=$SED fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 $as_echo "$ac_cv_path_SED" >&6; } SED="$ac_cv_path_SED" rm -f conftest.sed test -z "$SED" && SED=sed Xsed="$SED -e 1s/^X//" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 $as_echo_n "checking for fgrep... " >&6; } if test "${ac_cv_path_FGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then ac_path_FGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in fgrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'FGREP' >> "conftest.nl" "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_FGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_FGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_FGREP"; then as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_FGREP=$FGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 $as_echo "$ac_cv_path_FGREP" >&6; } FGREP="$ac_cv_path_FGREP" test -z "$GREP" && GREP=grep # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${lt_cv_path_LD+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } if test "${lt_cv_path_NM+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done : ${lt_cv_path_NM=no} fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } if test "$lt_cv_path_NM" != "no"; then NM="$lt_cv_path_NM" else # Didn't find any BSD compatible name lister, look for dumpbin. if test -n "$ac_tool_prefix"; then for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 $as_echo "$DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$DUMPBIN" && break done fi if test -z "$DUMPBIN"; then ac_ct_DUMPBIN=$DUMPBIN for ac_prog in "dumpbin -symbols" "link -dump -symbols" do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 $as_echo "$ac_ct_DUMPBIN" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_DUMPBIN" && break done if test "x$ac_ct_DUMPBIN" = x; then DUMPBIN=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DUMPBIN=$ac_ct_DUMPBIN fi fi if test "$DUMPBIN" != ":"; then NM="$DUMPBIN" fi fi test -z "$NM" && NM=nm { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 $as_echo_n "checking the name lister ($NM) interface... " >&6; } if test "${lt_cv_nm_interface+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:7135: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) cat conftest.err >&5 (eval echo "\"\$as_me:7138: $NM \\\"conftest.$ac_objext\\\"\"" >&5) (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) cat conftest.err >&5 (eval echo "\"\$as_me:7141: output\"" >&5) cat conftest.out >&5 if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 $as_echo "$lt_cv_nm_interface" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi # find the maximum length of command line arguments { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 $as_echo_n "checking the maximum length of command line arguments... " >&6; } if test "${lt_cv_sys_max_cmd_len+set}" = set; then : $as_echo_n "(cached) " >&6 else i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else # Make teststring a little bigger before we do anything with it. # a 1K string should be a reasonable start. for i in 1 2 3 4 5 6 7 8 ; do teststring=$teststring$teststring done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ = "XX$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done # Only check the string length outside the loop. lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= # Add a significant safety factor because C++ compilers can tack on # massive amounts of additional arguments before passing them to the # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac fi if test -n $lt_cv_sys_max_cmd_len ; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 $as_echo "$lt_cv_sys_max_cmd_len" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 $as_echo "none" >&6; } fi max_cmd_len=$lt_cv_sys_max_cmd_len : ${CP="cp -f"} : ${MV="mv -f"} : ${RM="rm -f"} { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } # Try some XSI features xsi_shell=no ( _lt_dummy="a/b/c" test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ = c,a/b,, \ && eval 'test $(( 1 + 1 )) -eq 2 \ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ && xsi_shell=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 $as_echo "$xsi_shell" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 $as_echo_n "checking whether the shell understands \"+=\"... " >&6; } lt_shell_append=no ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ >/dev/null 2>&1 \ && lt_shell_append=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 $as_echo "$lt_shell_append" >&6; } if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then lt_unset=unset else lt_unset=false fi # test EBCDIC or ASCII case `echo X|tr X '\101'` in A) # ASCII based system # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr lt_SP2NL='tr \040 \012' lt_NL2SP='tr \015\012 \040\040' ;; *) # EBCDIC based system lt_SP2NL='tr \100 \n' lt_NL2SP='tr \r\n \100\100' ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 $as_echo_n "checking for $LD option to reload object files... " >&6; } if test "${lt_cv_ld_reload_flag+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_reload_flag='-r' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 $as_echo "$lt_cv_ld_reload_flag" >&6; } reload_flag=$lt_cv_ld_reload_flag case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' else reload_cmds='$LD$reload_flag -o $output$reload_objs' fi ;; esac if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi test -z "$OBJDUMP" && OBJDUMP=objdump { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } if test "${lt_cv_deplibs_check_method+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given extended regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix[4-9]*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin*) # func_win32_libid is a shell function defined in ltmain.sh lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' ;; mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. if ( file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; cegcc) # use the weaker test based on 'objdump'. See mingw*. lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[3-9]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; *nto* | *qnx*) lt_cv_deplibs_check_method=pass_all ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AR="${ac_tool_prefix}ar" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 $as_echo "$AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AR="ar" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 $as_echo "$ac_ct_AR" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_AR" = x; then AR="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AR=$ac_ct_AR fi else AR="$ac_cv_prog_AR" fi test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi test -z "$STRIP" && STRIP=: if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi test -z "$RANLIB" && RANLIB=: # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : $as_echo_n "(cached) " >&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; osf*) symcode='[BCDEGQRST]' ;; solaris*) symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' ;; sysv4.2uw2*) symcode='[DT]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[ABDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[ABCDGIRSTW]' ;; esac # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function # and D for any global variable. # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ " {if(hide[section]) next};"\ " {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ " {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ " s[1]~/^[@?]/{print s[1], s[1]; next};"\ " s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; void nm_test_func(void); void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if $GREP ' nm_test_var$' "$nlist" >/dev/null; then if $GREP ' nm_test_func$' "$nlist" >/dev/null; then cat <<_LT_EOF > conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif _LT_EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' cat <<_LT_EOF >> conftest.$ac_ext /* The mapping between symbol names and symbols. */ const struct { const char *name; void *address; } lt__PROGRAM__LTX_preloaded_symbols[] = { { "@PROGRAM@", (void *) 0 }, _LT_EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext cat <<\_LT_EOF >> conftest.$ac_ext {0, (void *) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt__PROGRAM__LTX_preloaded_symbols; } #endif #ifdef __cplusplus } #endif _LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -rf conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi # Check whether --enable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then : enableval=$enable_libtool_lock; fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '#line 8343 "configure"' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*|s390*-*tpf*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 $as_echo_n "checking whether the C compiler needs -belf... " >&6; } if test "${lt_cv_cc_needs_belf+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_cc_needs_belf=yes else lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 $as_echo "$lt_cv_cc_needs_belf" >&6; } if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; esac ;; esac fi rm -rf conftest* ;; esac need_locks="$enable_libtool_lock" case $host_os in rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 $as_echo "$DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DSYMUTIL"; then ac_ct_DSYMUTIL=$DSYMUTIL # Extract the first word of "dsymutil", so it can be a program name with args. set dummy dsymutil; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 $as_echo "$ac_ct_DSYMUTIL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DSYMUTIL" = x; then DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DSYMUTIL=$ac_ct_DSYMUTIL fi else DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. set dummy ${ac_tool_prefix}nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 $as_echo "$NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_NMEDIT"; then ac_ct_NMEDIT=$NMEDIT # Extract the first word of "nmedit", so it can be a program name with args. set dummy nmedit; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_NMEDIT="nmedit" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 $as_echo "$ac_ct_NMEDIT" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_NMEDIT" = x; then NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac NMEDIT=$ac_ct_NMEDIT fi else NMEDIT="$ac_cv_prog_NMEDIT" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. set dummy ${ac_tool_prefix}lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_LIPO="${ac_tool_prefix}lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 $as_echo "$LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_LIPO"; then ac_ct_LIPO=$LIPO # Extract the first word of "lipo", so it can be a program name with args. set dummy lipo; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_LIPO="lipo" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 $as_echo "$ac_ct_LIPO" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_LIPO" = x; then LIPO=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac LIPO=$ac_ct_LIPO fi else LIPO="$ac_cv_prog_LIPO" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. set dummy ${ac_tool_prefix}otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL="${ac_tool_prefix}otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 $as_echo "$OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL"; then ac_ct_OTOOL=$OTOOL # Extract the first word of "otool", so it can be a program name with args. set dummy otool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL="otool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 $as_echo "$ac_ct_OTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL" = x; then OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL=$ac_ct_OTOOL fi else OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. set dummy ${ac_tool_prefix}otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OTOOL64+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 $as_echo "$OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OTOOL64"; then ac_ct_OTOOL64=$OTOOL64 # Extract the first word of "otool64", so it can be a program name with args. set dummy otool64; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OTOOL64="otool64" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 $as_echo "$ac_ct_OTOOL64" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OTOOL64" = x; then OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OTOOL64=$ac_ct_OTOOL64 fi else OTOOL64="$ac_cv_prog_OTOOL64" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } if test "${lt_cv_apple_cc_single_mod+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE # non-empty at configure time, or by adding -multi_module to the # link flags. rm -rf libconftest.dylib* echo "int foo(void){return 1;}" > conftest.c echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c" >&5 $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 fi rm -rf libconftest.dylib* rm -f conftest.* fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } case $host_os in rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in 10.0,*86*-darwin8*|10.0,*-darwin[91]*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; 10.[012]*) _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test "$lt_cv_apple_cc_single_mod" = "yes"; then _lt_dar_single_mod='$single_module' fi if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi if test "$DSYMUTIL" != ":"; then _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " eval as_val=\$$as_ac_Header if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in dlfcn.h do : ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default " if test "x$ac_cv_header_dlfcn_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_DLFCN_H 1 _ACEOF fi done # Set options enable_win32_dll=yes case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. set dummy ${ac_tool_prefix}as; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AS+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AS"; then ac_cv_prog_AS="$AS" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AS="${ac_tool_prefix}as" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AS=$ac_cv_prog_AS if test -n "$AS"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 $as_echo "$AS" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_AS"; then ac_ct_AS=$AS # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_AS+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AS"; then ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_AS="as" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_AS=$ac_cv_prog_ac_ct_AS if test -n "$ac_ct_AS"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 $as_echo "$ac_ct_AS" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_AS" = x; then AS="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac AS=$ac_ct_AS fi else AS="$ac_cv_prog_AS" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ac_tool_prefix}dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_DLLTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 $as_echo "$DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_DLLTOOL"; then ac_ct_DLLTOOL=$DLLTOOL # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_DLLTOOL="dlltool" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 $as_echo "$ac_ct_DLLTOOL" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_DLLTOOL" = x; then DLLTOOL="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac DLLTOOL=$ac_ct_DLLTOOL fi else DLLTOOL="$ac_cv_prog_DLLTOOL" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 $as_echo "$OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_OBJDUMP"; then ac_ct_OBJDUMP=$OBJDUMP # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_OBJDUMP="objdump" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 $as_echo "$ac_ct_OBJDUMP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_OBJDUMP" = x; then OBJDUMP="false" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac OBJDUMP=$ac_ct_OBJDUMP fi else OBJDUMP="$ac_cv_prog_OBJDUMP" fi ;; esac test -z "$AS" && AS=as test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$OBJDUMP" && OBJDUMP=objdump enable_dlopen=no # Check whether --enable-shared was given. if test "${enable_shared+set}" = set; then : enableval=$enable_shared; p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static was given. if test "${enable_static+set}" = set; then : enableval=$enable_static; p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac else enable_static=yes fi # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : withval=$with_pic; pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # Check whether --enable-fast-install was given. if test "${enable_fast_install+set}" = set; then : enableval=$enable_fast_install; p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac else enable_fast_install=yes fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' test -z "$LN_S" && LN_S="ln -s" if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 $as_echo_n "checking for objdir... " >&6; } if test "${lt_cv_objdir+set}" = set; then : $as_echo_n "(cached) " >&6 else rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 $as_echo "$lt_cv_objdir" >&6; } objdir=$lt_cv_objdir cat >>confdefs.h <<_ACEOF #define LT_OBJDIR "$lt_cv_objdir/" _ACEOF case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. sed_quote_subst='s/\(["`$\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\(["`\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to delay expansion of an escaped single quote. delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Global variables: ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$LD" && LD=ld test -z "$ac_objext" && ac_objext=o for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # Only perform the check for file, if the check method requires it test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 $as_echo_n "checking for file... " >&6; } if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : $as_echo_n "(cached) " >&6 else case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org _LT_EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 $as_echo "$MAGIC_CMD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi else MAGIC_CMD=: fi fi fi ;; esac # Use C for the default configuration in the libtool script lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o objext=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # Save the default compiler, since it gets overwritten when the other # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then lt_prog_compiler_no_builtin_flag=' -fno-builtin' { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:10171: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:10175: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" else : fi fi lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' lt_prog_compiler_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic='-fno-common' ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) # +Z the default ;; *) lt_prog_compiler_pic='-fPIC' ;; esac ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. lt_prog_compiler_can_build_shared=no enable_shared=no ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; *) lt_prog_compiler_pic='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) lt_prog_compiler_wl='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static='-Bstatic' else lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) lt_prog_compiler_wl='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? lt_prog_compiler_static='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) lt_prog_compiler_wl='-Wl,' # PIC (with -KPIC) is the default. lt_prog_compiler_static='-non_shared' ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in # old Intel for x86_64 which still supported -KPIC. ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; # icc used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. icc* | ifort*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' ;; # Lahey Fortran 8.1. lf95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='--shared' lt_prog_compiler_static='--static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' ;; ccc*) lt_prog_compiler_wl='-Wl,' # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; xl*) # IBM XL C 8.0/Fortran 10.1 on PPC lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-qpic' lt_prog_compiler_static='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; esac ;; esac ;; newsos6) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic='-fPIC -shared' ;; osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. lt_prog_compiler_static='-non_shared' ;; rdos*) lt_prog_compiler_static='-non_shared' ;; solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in f77* | f90* | f95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; esac ;; sunos4*) lt_prog_compiler_wl='-Qoption ld ' lt_prog_compiler_pic='-PIC' lt_prog_compiler_static='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_prog_compiler_pic='-Kconform_pic' lt_prog_compiler_static='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' ;; unicos*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_can_build_shared=no ;; uts4*) lt_prog_compiler_pic='-pic' lt_prog_compiler_static='-Bstatic' ;; *) lt_prog_compiler_can_build_shared=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic= ;; *) lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 $as_echo "$lt_prog_compiler_pic" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:10510: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:10514: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then case $lt_prog_compiler_pic in "" | " "*) ;; *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; esac else lt_prog_compiler_pic= lt_prog_compiler_can_build_shared=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if test "${lt_cv_prog_compiler_static_works+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes fi else lt_cv_prog_compiler_static_works=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then : else lt_prog_compiler_static= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:10615: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:10619: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:10670: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:10674: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= always_export_symbols=no archive_cmds= archive_expsym_cmds= compiler_needs_object=no enable_shared_with_static_runtimes=no export_dynamic_flag_spec= export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' hardcode_automatic=no hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported inherit_rpath=no link_all_deplibs=unknown module_cmds= module_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= thread_safe_flag_spec= whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; linux* | k*bsd*-gnu) link_all_deplibs=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi supports_anon_versioning=no case `$LD -v 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix[3-9]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. _LT_EOF fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs=no fi ;; interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) tmp_diet=no if test "$host_os" = linux-dietlibc; then case $cc_basename in diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) esac fi if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ && test "$tmp_diet" = no then tmp_addflag= tmp_sharedflag='-shared' case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; lf95*) # Lahey Fortran 8.1 whole_archive_flag_spec= tmp_sharedflag='--shared' ;; xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) tmp_sharedflag='-qmkshrobj' tmp_addflag= ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi case $cc_basename in xlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' hardcode_libdir_flag_spec= hardcode_libdir_flag_spec_ld='-rpath $libdir' archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi ;; esac else ld_shlibs=no fi ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then runpath_var= hardcode_libdir_flag_spec= export_dynamic_flag_spec= whole_archive_flag_spec= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds='' hardcode_direct=yes hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi link_all_deplibs=no else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' # Determine the default libpath from the value encoded in an # empty executable. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec='$convenience' archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='' ;; m68k) archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' enable_shared_with_static_runtimes=yes ;; darwin* | rhapsody*) archive_cmds_need_lc=no hardcode_direct=no hardcode_automatic=yes hardcode_shlibpath_var=unsupported whole_archive_flag_spec='' link_all_deplibs=yes allow_undefined_flag="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=echo archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" else ld_shlibs=no fi ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9*) if test "$GCC" = yes; then archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes export_dynamic_flag_spec='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' # Try to use the -exported_symbol ld option, if it does not # work, assume that -exports_file does not work either and # implicitly export all symbols. save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int foo(void) {} _ACEOF if ac_fn_c_try_link "$LINENO"; then : archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS="$save_LDFLAGS" else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: inherit_rpath=yes link_all_deplibs=yes ;; netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no hardcode_direct_absolute=yes if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case $host_os in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' fi archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else case `$CC -V 2>&1` in *"Compilers 5.0"*) wlarc='' archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ;; *) wlarc='${wl}' archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ;; esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else whole_archive_flag_spec='-z allextract$convenience -z defaultextract' fi ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) case $host_vendor in sni) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' reload_cmds='$CC -r -o $output$reload_objs' hardcode_direct=no ;; motorola) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag='${wl}-z,text' archive_cmds_need_lc=no hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag='${wl}-z,text' allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac if test x$host_vendor = xsni; then case $host in sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) export_dynamic_flag_spec='${wl}-Blargedynsym' ;; esac fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no with_gnu_ld=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc" in x|xyes) # Assume -lc should be added archive_cmds_need_lc=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl pic_flag=$lt_prog_compiler_pic compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then archive_cmds_need_lc=no else archive_cmds_need_lc=yes fi allow_undefined_flag=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 $as_echo "$archive_cmds_need_lc" >&6; } ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= if test -n "$hardcode_libdir_flag_spec" || test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } if test "$hardcode_action" = relink || test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes fi ;; *) ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" if test "x$ac_cv_func_shl_load" = x""yes; then : lt_cv_dlopen="shl_load" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } if test "${ac_cv_lib_dld_shl_load+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load (); int main () { return shl_load (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } if test "${ac_cv_lib_dl_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } if test "${ac_cv_lib_svld_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } if test "${ac_cv_lib_dld_dld_link+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dld_link (); int main () { return dld_link (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } if test "${lt_cv_dlopen_self+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line 13054 "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } if test "${lt_cv_dlopen_self_static+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext <<_LT_EOF #line 13150 "configure" #include "confdefs.h" #if HAVE_DLFCN_H #include #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); return status; } _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi striplib= old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi ;; *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } ;; esac fi # Report which library types will actually be built { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 $as_echo_n "checking if libtool supports shared libraries... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 $as_echo "$can_build_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 $as_echo_n "checking whether to build shared libraries... " >&6; } test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix[4-9]*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 $as_echo "$enable_shared" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 $as_echo_n "checking whether to build static libraries... " >&6; } # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 $as_echo "$enable_static" >&6; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu CC="$lt_save_CC" ac_config_commands="$ac_config_commands libtool" # Only expand once: # Checks for programs. ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "no acceptable C compiler found in \$PATH See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi case $ac_cv_prog_cc_stdc in #( no) : ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #( *) : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 $as_echo_n "checking for $CC option to accept ISO C99... " >&6; } if test "${ac_cv_prog_cc_c99+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include #include // Check varargs macros. These examples are taken from C99 6.10.3.5. #define debug(...) fprintf (stderr, __VA_ARGS__) #define showlist(...) puts (#__VA_ARGS__) #define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) static void test_varargs_macros (void) { int x = 1234; int y = 5678; debug ("Flag"); debug ("X = %d\n", x); showlist (The first, second, and third items.); report (x>y, "x is %d but y is %d", x, y); } // Check long long types. #define BIG64 18446744073709551615ull #define BIG32 4294967295ul #define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) #if !BIG_OK your preprocessor is broken; #endif #if BIG_OK #else your preprocessor is broken; #endif static long long int bignum = -9223372036854775807LL; static unsigned long long int ubignum = BIG64; struct incomplete_array { int datasize; double data[]; }; struct named_init { int number; const wchar_t *name; double average; }; typedef const char *ccp; static inline int test_restrict (ccp restrict text) { // See if C++-style comments work. // Iterate through items via the restricted pointer. // Also check for declarations in for loops. for (unsigned int i = 0; *(text+i) != '\0'; ++i) continue; return 0; } // Check varargs and va_copy. static void test_varargs (const char *format, ...) { va_list args; va_start (args, format); va_list args_copy; va_copy (args_copy, args); const char *str; int number; float fnumber; while (*format) { switch (*format++) { case 's': // string str = va_arg (args_copy, const char *); break; case 'd': // int number = va_arg (args_copy, int); break; case 'f': // float fnumber = va_arg (args_copy, double); break; default: break; } } va_end (args_copy); va_end (args); } int main () { // Check bool. _Bool success = false; // Check restrict. if (test_restrict ("String literal") == 0) success = true; char *restrict newvar = "Another string"; // Check varargs. test_varargs ("s, d' f .", "string", 65, 34.234); test_varargs_macros (); // Check flexible array members. struct incomplete_array *ia = malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); ia->datasize = 10; for (int i = 0; i < ia->datasize; ++i) ia->data[i] = i * 1.234; // Check named initializers. struct named_init ni = { .number = 34, .name = L"Test wide string", .average = 543.34343, }; ni.number = 58; int dynamic_array[ni.number]; dynamic_array[ni.number - 1] = 543; // work around unused variable warnings return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' || dynamic_array[ni.number - 1] != 543); ; return 0; } _ACEOF for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99 do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c99=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c99" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c99" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c99" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 $as_echo "$ac_cv_prog_cc_c99" >&6; } ;; esac if test "x$ac_cv_prog_cc_c99" != xno; then : ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 else ac_cv_prog_cc_stdc=no fi fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5 $as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; } if test "${ac_cv_prog_cc_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 fi case $ac_cv_prog_cc_stdc in #( no) : { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; #( '') : { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; #( *) : { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5 $as_echo "$ac_cv_prog_cc_stdc" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : else ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CXX" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu if test -z "$CXX"; then if test -n "$CCC"; then CXX=$CCC else if test -n "$ac_tool_prefix"; then for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CXX=$ac_cv_prog_CXX if test -n "$CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 $as_echo "$CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CXX" && break done fi if test -z "$CXX"; then ac_ct_CXX=$CXX for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CXX"; then ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CXX="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CXX=$ac_cv_prog_ac_ct_CXX if test -n "$ac_ct_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 $as_echo "$ac_ct_CXX" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CXX" && break done if test "x$ac_ct_CXX" = x; then CXX="g++" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CXX=$ac_ct_CXX fi fi fi fi # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_cxx_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS=${CXXFLAGS+set} ac_save_CXXFLAGS=$CXXFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 $as_echo_n "checking whether $CXX accepts -g... " >&6; } if test "${ac_cv_prog_cxx_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_cxx_werror_flag=$ac_cxx_werror_flag ac_cxx_werror_flag=yes ac_cv_prog_cxx_g=no CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes else CXXFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : else ac_cxx_werror_flag=$ac_save_cxx_werror_flag CXXFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_compile "$LINENO"; then : ac_cv_prog_cxx_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cxx_werror_flag=$ac_save_cxx_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 $as_echo "$ac_cv_prog_cxx_g" >&6; } if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS=$ac_save_CXXFLAGS elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu depcc="$CXX" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CXX_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CXX_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CXX_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then am__fastdepCXX_TRUE= am__fastdepCXX_FALSE='#' else am__fastdepCXX_TRUE='#' am__fastdepCXX_FALSE= fi if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5 $as_echo_n "checking how to run the C++ preprocessor... " >&6; } if test -z "$CXXCPP"; then if test "${ac_cv_prog_CXXCPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CXXCPP needs to be expanded for CXXCPP in "$CXX -E" "/lib/cpp" do ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CXXCPP=$CXXCPP fi CXXCPP=$ac_cv_prog_CXXCPP else ac_cv_prog_CXXCPP=$CXXCPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5 $as_echo "$CXXCPP" >&6; } ac_preproc_ok=false for ac_cxx_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_cxx_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} _lt_caught_CXX_error=yes; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu else _lt_caught_CXX_error=yes fi ac_ext=cpp ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu archive_cmds_need_lc_CXX=no allow_undefined_flag_CXX= always_export_symbols_CXX=no archive_expsym_cmds_CXX= compiler_needs_object_CXX=no export_dynamic_flag_spec_CXX= hardcode_direct_CXX=no hardcode_direct_absolute_CXX=no hardcode_libdir_flag_spec_CXX= hardcode_libdir_flag_spec_ld_CXX= hardcode_libdir_separator_CXX= hardcode_minus_L_CXX=no hardcode_shlibpath_var_CXX=unsupported hardcode_automatic_CXX=no inherit_rpath_CXX=no module_cmds_CXX= module_expsym_cmds_CXX= link_all_deplibs_CXX=unknown old_archive_cmds_CXX=$old_archive_cmds no_undefined_flag_CXX= whole_archive_flag_spec_CXX= enable_shared_with_static_runtimes_CXX=no # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o objext_CXX=$objext # No sense in running all these tests if we already determined that # the CXX compiler isn't working. Some variables (like enable_shared) # are currently assumed to apply to all compilers on this platform, # and will be corrupted by setting them based on a non-working compiler. if test "$_lt_caught_CXX_error" != yes; then # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $RM -r conftest* # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC compiler_CXX=$CC for cc_temp in $compiler""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` if test -n "$compiler"; then # We don't want -fno-exception when compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' else lt_prog_compiler_no_builtin_flag_CXX= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration # Check whether --with-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi if test "${lt_cv_path_LD+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &5 $as_echo "$LD" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } if test "${lt_cv_prog_gnu_ld+set}" = set; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 &5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | $GREP 'no-whole-archive' > /dev/null; then whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec_CXX= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ld_shlibs_CXX=yes case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aix[4-9]*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. archive_cmds_CXX='' hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes file_list_spec_CXX='${wl}-f,' if test "$GXX" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && strings "$collect2name" | $GREP resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct_CXX=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L_CXX=yes hardcode_libdir_flag_spec_CXX='-L$libdir' hardcode_libdir_separator_CXX= fi esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi export_dynamic_flag_spec_CXX='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to # export. always_export_symbols_CXX=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag_CXX='-berok' # Determine the default libpath from the value encoded in an empty # executable. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag_CXX="-z nodefs" archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an # empty executable. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag_CXX=' ${wl}-bernotok' allow_undefined_flag_CXX=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec_CXX='$convenience' archive_cmds_need_lc_CXX=yes # This is similar to how AIX traditionally builds its shared # libraries. archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag_CXX=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs_CXX=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec_CXX='-L$libdir' allow_undefined_flag_CXX=unsupported always_export_symbols_CXX=no enable_shared_with_static_runtimes_CXX=yes if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else ld_shlibs_CXX=no fi ;; darwin* | rhapsody*) archive_cmds_need_lc_CXX=no hardcode_direct_CXX=no hardcode_automatic_CXX=yes hardcode_shlibpath_var_CXX=unsupported whole_archive_flag_spec_CXX='' link_all_deplibs_CXX=yes allow_undefined_flag_CXX="$_lt_dar_allow_undefined" case $cc_basename in ifort*) _lt_dar_can_shared=yes ;; *) _lt_dar_can_shared=$GCC ;; esac if test "$_lt_dar_can_shared" = "yes"; then output_verbose_link_cmd=echo archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" if test "$lt_cv_apple_cc_single_mod" != "yes"; then archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" fi else ld_shlibs_CXX=no fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; freebsd[12]*) # C++ shared libraries reported to be fairly broken before # switch to ELF ld_shlibs_CXX=no ;; freebsd-elf*) archive_cmds_need_lc_CXX=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions ld_shlibs_CXX=yes ;; gnu*) ;; hpux9*) hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: export_dynamic_flag_spec_CXX='${wl}-E' hardcode_direct_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' hardcode_libdir_separator_CXX=: case $host_cpu in hppa*64*|ia64*) ;; *) export_dynamic_flag_spec_CXX='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no ;; *) hardcode_direct_CXX=yes hardcode_direct_absolute_CXX=yes hardcode_minus_L_CXX=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; aCC*) case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; interix[3-9]*) hardcode_direct_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' fi fi link_all_deplibs_CXX=yes ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: inherit_rpath_CXX=yes ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc* | ecpc* ) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac archive_cmds_need_lc_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC* | pgcpp*) # Portland Group C++ compiler case `$CC -V` in *pgCC\ [1-5]* | *pgcpp\ [1-5]*) prelink_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' old_archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ $RANLIB $oldlib' archive_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='tpldir=Template.dir~ rm -rf $tpldir~ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; *) # Version 6 will use weak symbols archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec_CXX='-rpath $libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; xl*) # IBM XL 8.0 on PPC, with GNU ld hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec_CXX='${wl}--export-dynamic' archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' hardcode_libdir_flag_spec_CXX='-R$libdir' whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' compiler_needs_object_CXX=yes # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; *nto* | *qnx*) ld_shlibs_CXX=yes ;; openbsd2*) # C++ shared libraries are fairly broken ld_shlibs_CXX=no ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct_CXX=yes hardcode_shlibpath_var_CXX=no hardcode_direct_absolute_CXX=yes archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' export_dynamic_flag_spec_CXX='${wl}-E' whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd=echo else ld_shlibs_CXX=no fi ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' hardcode_libdir_separator_CXX=: # Archives containing C++ object files must be created using # the KAI C++ compiler. case $host in osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;; *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;; esac ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; cxx*) case $host in osf3*) allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ;; *) allow_undefined_flag_CXX=' -expect_unresolved \*' archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ $RM $lib.exp' hardcode_libdir_flag_spec_CXX='-rpath $libdir' ;; esac hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' case $host in osf3*) archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; *) archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ;; esac hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator_CXX=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # FIXME: insert proper C++ library support ld_shlibs_CXX=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ archive_cmds_need_lc_CXX=yes no_undefined_flag_CXX=' -zdefs' archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' hardcode_libdir_flag_spec_CXX='-R$libdir' hardcode_shlibpath_var_CXX=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs_CXX=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then no_undefined_flag_CXX=' ${wl}-z ${wl}defs' if $CC --version | $GREP -v '^2\.7' > /dev/null; then archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' fi hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) no_undefined_flag_CXX='${wl}-z,text' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. no_undefined_flag_CXX='${wl}-z,text' allow_undefined_flag_CXX='${wl}-z,nodefs' archive_cmds_need_lc_CXX=no hardcode_shlibpath_var_CXX=no hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir' hardcode_libdir_separator_CXX=':' link_all_deplibs_CXX=yes export_dynamic_flag_spec_CXX='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; *) # FIXME: insert proper C++ library support ld_shlibs_CXX=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no GCC_CXX="$GXX" LD_CXX="$LD" ## CAVEAT EMPTOR: ## There is no encapsulation within the following macros, do not change ## the running order or otherwise move them around unless you know exactly ## what you are doing... # Dependencies to place before and after the object being linked: predep_objects_CXX= postdep_objects_CXX= predeps_CXX= postdeps_CXX= compiler_lib_search_path_CXX= cat > conftest.$ac_ext <<_LT_EOF class Foo { public: Foo (void) { a = 0; } private: int a; }; _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval "$output_verbose_link_cmd"`; do case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" || test $p = "-R"; then prev=$p continue else prev= fi if test "$pre_test_object_deps_done" = no; then case $p in -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path_CXX"; then compiler_lib_search_path_CXX="${prev}${p}" else compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else if test -z "$postdeps_CXX"; then postdeps_CXX="${prev}${p}" else postdeps_CXX="${postdeps_CXX} ${prev}${p}" fi fi ;; *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects_CXX"; then predep_objects_CXX="$p" else predep_objects_CXX="$predep_objects_CXX $p" fi else if test -z "$postdep_objects_CXX"; then postdep_objects_CXX="$p" else postdep_objects_CXX="$postdep_objects_CXX $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out a.exe else echo "libtool.m4: error: problem compiling CXX test program" fi $RM -f confest.$objext # PORTME: override above test on systems where it is broken case $host_os in interix[3-9]*) # Interix 3.5 installs completely hosed .la files for C++, so rather than # hack all around it, let's just trust "g++" to DTRT. predep_objects_CXX= postdep_objects_CXX= postdeps_CXX= ;; linux*) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then postdeps_CXX='-library=Cstd -library=Crun' fi ;; esac ;; esac case " $postdeps_CXX " in *" -lc "*) archive_cmds_need_lc_CXX=no ;; esac compiler_lib_search_dirs_CXX= if test -n "${compiler_lib_search_path_CXX}"; then compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` fi lt_prog_compiler_wl_CXX= lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX= { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 $as_echo_n "checking for $compiler option to produce PIC... " >&6; } # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' fi ;; amigaos*) case $host_cpu in powerpc) # see comment about AmigaOS4 .so support lt_prog_compiler_pic_CXX='-fPIC' ;; m68k) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ;; esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_prog_compiler_pic_CXX='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all lt_prog_compiler_pic_CXX= ;; interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic_CXX=-Kconform_pic fi ;; hpux*) # PIC is the default for 64-bit PA HP-UX, but not for 32-bit # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag # sets the default TLS model and affects inlining. case $host_cpu in hppa*64*) ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; *) lt_prog_compiler_pic_CXX='-fPIC' ;; esac else case $host_os in aix[4-9]*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_prog_compiler_static_CXX='-Bstatic' else lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; dgux*) case $cc_basename in ec++*) lt_prog_compiler_pic_CXX='-KPIC' ;; ghcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then lt_prog_compiler_pic_CXX='+Z' fi ;; aCC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) lt_prog_compiler_pic_CXX='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_static_CXX='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler lt_prog_compiler_wl_CXX='--backend -Wl,' lt_prog_compiler_pic_CXX='-fPIC' ;; ecpc* ) # old Intel C++ for x86_64 which still supported -KPIC. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-static' ;; icpc* ) # Intel C++, used to be incompatible with GCC. # ICC 10 doesn't accept -KPIC any more. lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fPIC' lt_prog_compiler_static_CXX='-static' ;; pgCC* | pgcpp*) # Portland Group C++ compiler lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-fpic' lt_prog_compiler_static_CXX='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; xlc* | xlC*) # IBM XL 8.0 on PPC lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-qpic' lt_prog_compiler_static_CXX='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) lt_prog_compiler_pic_CXX='-W c,exportall' ;; *) ;; esac ;; netbsd* | netbsdelf*-gnu) ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. lt_prog_compiler_pic_CXX='-fPIC -shared' ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) lt_prog_compiler_wl_CXX='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 lt_prog_compiler_pic_CXX='-pic' ;; cxx*) # Digital/Compaq C++ lt_prog_compiler_wl_CXX='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. lt_prog_compiler_pic_CXX= lt_prog_compiler_static_CXX='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' lt_prog_compiler_wl_CXX='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler lt_prog_compiler_pic_CXX='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x lt_prog_compiler_pic_CXX='-pic' lt_prog_compiler_static_CXX='-Bstatic' ;; lcc*) # Lucid lt_prog_compiler_pic_CXX='-pic' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) lt_prog_compiler_wl_CXX='-Wl,' lt_prog_compiler_pic_CXX='-KPIC' lt_prog_compiler_static_CXX='-Bstatic' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 lt_prog_compiler_pic_CXX='-KPIC' ;; *) ;; esac ;; vxworks*) ;; *) lt_prog_compiler_can_build_shared_CXX=no ;; esac fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) lt_prog_compiler_pic_CXX= ;; *) lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5 $as_echo "$lt_prog_compiler_pic_CXX" >&6; } # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic_CXX"; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works_CXX=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17136: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 echo "$as_me:17140: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works_CXX=yes fi fi $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then case $lt_prog_compiler_pic_CXX in "" | " "*) ;; *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; esac else lt_prog_compiler_pic_CXX= lt_prog_compiler_can_build_shared_CXX=no fi fi # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works_CXX=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works_CXX=yes fi else lt_cv_prog_compiler_static_works_CXX=yes fi fi $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5 $as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then : else lt_prog_compiler_static_CXX= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17235: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:17239: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o_CXX=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:17287: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 echo "$as_me:17291: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o_CXX=yes fi fi chmod u+w . 2>&5 $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files $RM out/* && rmdir out cd .. $RM -r conftest $RM conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5 $as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } hard_links="nottested" if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi else need_locks=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix[4-9]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) export_symbols_cmds_CXX="$ltdll_cmds" ;; cygwin* | mingw* | cegcc*) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' ;; linux* | k*bsd*-gnu) link_all_deplibs_CXX=no ;; *) export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5 $as_echo "$ld_shlibs_CXX" >&6; } test "$ld_shlibs_CXX" = no && can_build_shared=no with_gnu_ld_CXX=$with_gnu_ld # # Do we need to explicitly link libc? # case "x$archive_cmds_need_lc_CXX" in x|xyes) # Assume -lc should be added archive_cmds_need_lc_CXX=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds_CXX in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_prog_compiler_wl_CXX pic_flag=$lt_prog_compiler_pic_CXX compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$allow_undefined_flag_CXX allow_undefined_flag_CXX= if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then archive_cmds_need_lc_CXX=no else archive_cmds_need_lc_CXX=yes fi allow_undefined_flag_CXX=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $RM conftest* { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5 $as_echo "$archive_cmds_need_lc_CXX" >&6; } ;; esac fi ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix[4-9]*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) case $host_cpu in powerpc) # Since July 2007 AmigaOS4 officially supports .so libraries. # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ;; m68k) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; esac ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[45]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname~ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[123]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[3-9]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # Some binutils ld are patched to set DT_RUNPATH save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\"" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_cxx_try_link "$LINENO"; then : if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : shlibpath_overrides_runpath=yes fi fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsdelf*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='NetBSD ld.elf_so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; *nto* | *qnx*) version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes dynamic_linker='ldqnx.so' ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action_CXX= if test -n "$hardcode_libdir_flag_spec_CXX" || test -n "$runpath_var_CXX" || test "X$hardcode_automatic_CXX" = "Xyes" ; then # We can hardcode non-existent directories. if test "$hardcode_direct_CXX" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no && test "$hardcode_minus_L_CXX" != no; then # Linking always hardcodes the temporary library directory. hardcode_action_CXX=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action_CXX=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action_CXX=unsupported fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5 $as_echo "$hardcode_action_CXX" >&6; } if test "$hardcode_action_CXX" = relink || test "$inherit_rpath_CXX" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi fi # test -n "$compiler" CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld fi # test "$_lt_caught_CXX_error" != yes ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi # Checks for typedefs, structures, and compiler characteristics. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if test "${ac_cv_c_const+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset cs; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then $as_echo "#define const /**/" >>confdefs.h fi ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" if test "x$ac_cv_type_size_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" if test "x$ac_cv_type_ssize_t" = x""yes; then : else cat >>confdefs.h <<_ACEOF #define ssize_t int _ACEOF fi ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" case $ac_cv_c_int64_t in #( no|yes) ;; #( *) cat >>confdefs.h <<_ACEOF #define int64_t $ac_cv_c_int64_t _ACEOF ;; esac ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t" case $ac_cv_c_uint64_t in #( no|yes) ;; #( *) $as_echo "#define _UINT64_T 1" >>confdefs.h cat >>confdefs.h <<_ACEOF #define uint64_t $ac_cv_c_uint64_t _ACEOF ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } if test "${ac_cv_struct_tm+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { struct tm tm; int *p = &tm.tm_sec; return !p; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_tm=time.h else ac_cv_struct_tm=sys/time.h fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 $as_echo "$ac_cv_struct_tm" >&6; } if test $ac_cv_struct_tm = sys/time.h; then $as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h fi # Checks for header files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 $as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } if test "${ac_cv_header_time+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_time=yes else ac_cv_header_time=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 $as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then $as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h fi for ac_header in dlfcn.h getopt.h inttypes.h libintl.h stdlib.h string.h sys/time.h unistd.h windows.h windef.h winsock2.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" eval as_val=\$$as_ac_Header if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done # Checks for library functions. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for error_at_line" >&5 $as_echo_n "checking for error_at_line... " >&6; } if test "${ac_cv_lib_error_at_line+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { error_at_line (0, 0, "", 0, "an error occurred"); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_error_at_line=yes else ac_cv_lib_error_at_line=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_error_at_line" >&5 $as_echo "$ac_cv_lib_error_at_line" >&6; } if test $ac_cv_lib_error_at_line = no; then case " $LIBOBJS " in *" error.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS error.$ac_objext" ;; esac fi for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 $as_echo_n "checking for GNU libc compatible malloc... " >&6; } if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_malloc_0_nonnull=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *malloc (); #endif int main () { return ! malloc (0); ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_malloc_0_nonnull=yes else ac_cv_func_malloc_0_nonnull=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 $as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } if test $ac_cv_func_malloc_0_nonnull = yes; then : $as_echo "#define HAVE_MALLOC 1" >>confdefs.h else $as_echo "#define HAVE_MALLOC 0" >>confdefs.h case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS malloc.$ac_objext" ;; esac $as_echo "#define malloc rpl_malloc" >>confdefs.h fi for ac_header in stdlib.h do : ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" if test "x$ac_cv_header_stdlib_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STDLIB_H 1 _ACEOF fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5 $as_echo_n "checking for GNU libc compatible realloc... " >&6; } if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_realloc_0_nonnull=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include #else char *realloc (); #endif int main () { return ! realloc (0, 0); ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_realloc_0_nonnull=yes else ac_cv_func_realloc_0_nonnull=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5 $as_echo "$ac_cv_func_realloc_0_nonnull" >&6; } if test $ac_cv_func_realloc_0_nonnull = yes; then : $as_echo "#define HAVE_REALLOC 1" >>confdefs.h else $as_echo "#define HAVE_REALLOC 0" >>confdefs.h case " $LIBOBJS " in *" realloc.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS realloc.$ac_objext" ;; esac $as_echo "#define realloc rpl_realloc" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strtod" >&5 $as_echo_n "checking for working strtod... " >&6; } if test "${ac_cv_func_strtod+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_strtod=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default #ifndef strtod double strtod (); #endif int main() { { /* Some versions of Linux strtod mis-parse strings with leading '+'. */ char *string = " +69"; char *term; double value; value = strtod (string, &term); if (value != 69 || term != (string + 4)) return 1; } { /* Under Solaris 2.4, strtod returns the wrong value for the terminating character under some conditions. */ char *string = "NaN"; char *term; strtod (string, &term); if (term != string && *(term - 1) == 0) return 1; } return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_strtod=yes else ac_cv_func_strtod=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strtod" >&5 $as_echo "$ac_cv_func_strtod" >&6; } if test $ac_cv_func_strtod = no; then case " $LIBOBJS " in *" strtod.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS strtod.$ac_objext" ;; esac ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow" if test "x$ac_cv_func_pow" = x""yes; then : fi if test $ac_cv_func_pow = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5 $as_echo_n "checking for pow in -lm... " >&6; } if test "${ac_cv_lib_m_pow+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lm $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char pow (); int main () { return pow (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_m_pow=yes else ac_cv_lib_m_pow=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5 $as_echo "$ac_cv_lib_m_pow" >&6; } if test "x$ac_cv_lib_m_pow" = x""yes; then : POW_LIB=-lm else { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot find library containing definition of pow" >&5 $as_echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;} fi fi fi for ac_func in strftime do : ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime" if test "x$ac_cv_func_strftime" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRFTIME 1 _ACEOF else # strftime is in -lintl on SCO UNIX. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5 $as_echo_n "checking for strftime in -lintl... " >&6; } if test "${ac_cv_lib_intl_strftime+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char strftime (); int main () { return strftime (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_strftime=yes else ac_cv_lib_intl_strftime=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5 $as_echo "$ac_cv_lib_intl_strftime" >&6; } if test "x$ac_cv_lib_intl_strftime" = x""yes; then : $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h LIBS="-lintl $LIBS" fi fi done for ac_func in getopt memmove memset select setenv snprintf strdup strncasecmp strstr strtol strtoul strtoull do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" eval as_val=\$$as_ac_var if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done # Checks for additional libraries ORIGLIBS=${LIBS}; LIBS="" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5 $as_echo_n "checking for library containing dlopen... " >&6; } if test "${ac_cv_search_dlopen+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen (); int main () { return dlopen (); ; return 0; } _ACEOF for ac_lib in '' dl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_dlopen=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if test "${ac_cv_search_dlopen+set}" = set; then : break fi done if test "${ac_cv_search_dlopen+set}" = set; then : else ac_cv_search_dlopen=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5 $as_echo "$ac_cv_search_dlopen" >&6; } ac_res=$ac_cv_search_dlopen if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" $as_echo "#define HAVE_LIBDL 1" >>confdefs.h fi MAINLIBS=${LIBS}; LIBS=${ORIGLIBS} # Checks for additional programs # Extract the first word of "db2x_manxml", so it can be a program name with args. set dummy db2x_manxml; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_db2man+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$db2man"; then ac_cv_prog_db2man="$db2man" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_db2man="yes" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_db2man" && ac_cv_prog_db2man="no" fi fi db2man=$ac_cv_prog_db2man if test -n "$db2man"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $db2man" >&5 $as_echo "$db2man" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi # Extract the first word of "doxygen", so it can be a program name with args. set dummy doxygen; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_doxygen+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$doxygen"; then ac_cv_prog_doxygen="$doxygen" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_doxygen="yes" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_doxygen" && ac_cv_prog_doxygen="no" fi fi doxygen=$ac_cv_prog_doxygen if test -n "$doxygen"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $doxygen" >&5 $as_echo "$doxygen" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x${db2man}" != xyes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: Warning: docbook man page converter not found - skip generating man pages" >&5 $as_echo "Warning: docbook man page converter not found - skip generating man pages" >&6; }; fi if test "x${doxygen}" != xyes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: Warning: doxygen not found - skip generating man pages" >&5 $as_echo "Warning: doxygen not found - skip generating man pages" >&6; }; fi if test "x${db2man}" = xyes -a "x${doxygen}" = xyes; then ENABLEMAN_TRUE= ENABLEMAN_FALSE='#' else ENABLEMAN_TRUE='#' ENABLEMAN_FALSE= fi # Build options # Check whether --enable-singlelib was given. if test "${enable_singlelib+set}" = set; then : enableval=$enable_singlelib; singlelib="${enableval}" else singlelib=no fi if test "x${singlelib}" = xyes; then SINGLELIB_TRUE= SINGLELIB_FALSE='#' else SINGLELIB_TRUE='#' SINGLELIB_FALSE= fi # Check whether --enable-test was given. if test "${enable_test+set}" = set; then : enableval=$enable_test; test="${enableval}" else test=yes fi if test "x${test}" = xyes; then ENABLETEST_TRUE= ENABLETEST_FALSE='#' else ENABLETEST_TRUE='#' ENABLETEST_FALSE= fi # Check whether --enable-utils was given. if test "${enable_utils+set}" = set; then : enableval=$enable_utils; utils="${enableval}" else utils=yes fi if test "x${utils}" = xyes; then ENABLEUTILS_TRUE= ENABLEUTILS_FALSE='#' else ENABLEUTILS_TRUE='#' ENABLEUTILS_FALSE= fi if test "x${utils}" = xyes; then for ac_header in readline/readline.h do : ac_fn_c_check_header_mongrel "$LINENO" "readline/readline.h" "ac_cv_header_readline_readline_h" "$ac_includes_default" if test "x$ac_cv_header_readline_readline_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_READLINE_READLINE_H 1 _ACEOF else as_fn_error "libreadline header (readline.h) not found" "$LINENO" 5 fi done for ac_header in readline/history.h do : ac_fn_c_check_header_mongrel "$LINENO" "readline/history.h" "ac_cv_header_readline_history_h" "$ac_includes_default" if test "x$ac_cv_header_readline_history_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_READLINE_HISTORY_H 1 _ACEOF else as_fn_error "libreadline header (history.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5 $as_echo_n "checking for initscr in -lncurses... " >&6; } if test "${ac_cv_lib_ncurses_initscr+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lncurses $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char initscr (); int main () { return initscr (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_ncurses_initscr=yes else ac_cv_lib_ncurses_initscr=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5 $as_echo "$ac_cv_lib_ncurses_initscr" >&6; } if test "x$ac_cv_lib_ncurses_initscr" = x""yes; then : $as_echo "#define HAVE_LIBNCURSES 1" >>confdefs.h else as_fn_error "ncurses library (libncurses) not found" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for readline in -lreadline -lncurses" >&5 $as_echo_n "checking for readline in -lreadline -lncurses... " >&6; } if test "${ac_cv_lib_readline__lncurses_readline+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lreadline -lncurses $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char readline (); int main () { return readline (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_readline__lncurses_readline=yes else ac_cv_lib_readline__lncurses_readline=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_readline__lncurses_readline" >&5 $as_echo "$ac_cv_lib_readline__lncurses_readline" >&6; } if test "x$ac_cv_lib_readline__lncurses_readline" = x""yes; then : $as_echo "#define HAVE_LIBREADLINE 1" >>confdefs.h else as_fn_error "readline library (libreadline) not found" "$LINENO" 5 fi fi # Conditional builds # Check whether --with-backends was given. if test "${with_backends+set}" = set; then : withval=$with_backends; backends="${withval}" fi # Conditional checks and libs for backend in $backends do backendlibs="${backendlibs} ../backends/${backend}/lib${backend}backend.la" case $backend in firebird) for ac_header in ibase.h do : ac_fn_c_check_header_mongrel "$LINENO" "ibase.h" "ac_cv_header_ibase_h" "$ac_includes_default" if test "x$ac_cv_header_ibase_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_IBASE_H 1 _ACEOF else as_fn_error "firebird header (ibase.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for isc_attach_database in -lfbclient" >&5 $as_echo_n "checking for isc_attach_database in -lfbclient... " >&6; } if test "${ac_cv_lib_fbclient_isc_attach_database+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lfbclient $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char isc_attach_database (); int main () { return isc_attach_database (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_fbclient_isc_attach_database=yes else ac_cv_lib_fbclient_isc_attach_database=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_fbclient_isc_attach_database" >&5 $as_echo "$ac_cv_lib_fbclient_isc_attach_database" >&6; } if test "x$ac_cv_lib_fbclient_isc_attach_database" = x""yes; then : $as_echo "#define HAVE_LIBFBCLIENT 1" >>confdefs.h LIBFIREBIRD="fbclient" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for isc_attach_database in -lgds32" >&5 $as_echo_n "checking for isc_attach_database in -lgds32... " >&6; } if test "${ac_cv_lib_gds32_isc_attach_database+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lgds32 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char isc_attach_database (); int main () { return isc_attach_database (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_gds32_isc_attach_database=yes else ac_cv_lib_gds32_isc_attach_database=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gds32_isc_attach_database" >&5 $as_echo "$ac_cv_lib_gds32_isc_attach_database" >&6; } if test "x$ac_cv_lib_gds32_isc_attach_database" = x""yes; then : $as_echo "#define HAVE_LIBGDS32 1" >>confdefs.h LIBFIREBIRD="gds32" else odbx_saved_libs=${LIBS}; LIBS="-lfbclient_ms" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main() { isc_attach_database( NULL, 0, "", NULL, 0, NULL ); return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for isc_attach_database in -lfbclient_ms... yes" >&5 $as_echo "checking for isc_attach_database in -lfbclient_ms... yes" >&6; } $as_echo "#define HAVE_LIBFBCLIENT 1" >>confdefs.h LIBFIREBIRD="fbclient_ms" else { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for isc_attach_database in -lfbclient_ms... no" >&5 $as_echo "checking for isc_attach_database in -lfbclient_ms... no" >&6; } as_fn_error "firebird/interbase library (libfbclient, libfbclient_ms or gds32) not found" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=${odbx_saved_libs} fi fi ;; mssql) for ac_header in sybfront.h do : ac_fn_c_check_header_mongrel "$LINENO" "sybfront.h" "ac_cv_header_sybfront_h" "$ac_includes_default" if test "x$ac_cv_header_sybfront_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SYBFRONT_H 1 _ACEOF else as_fn_error "mssql header (sybfront.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dbresults in -lsybdb" >&5 $as_echo_n "checking for dbresults in -lsybdb... " >&6; } if test "${ac_cv_lib_sybdb_dbresults+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsybdb $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dbresults (); int main () { return dbresults (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_sybdb_dbresults=yes else ac_cv_lib_sybdb_dbresults=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sybdb_dbresults" >&5 $as_echo "$ac_cv_lib_sybdb_dbresults" >&6; } if test "x$ac_cv_lib_sybdb_dbresults" = x""yes; then : $as_echo "#define HAVE_LIBSYBDB 1" >>confdefs.h LIBMSSQL="sybdb" else as_fn_error "mssql library (libsybdb) not found" "$LINENO" 5 fi ac_fn_c_check_member "$LINENO" "struct dbdaterec" "year" "ac_cv_member_struct_dbdaterec_year" "#include " if test "x$ac_cv_member_struct_dbdaterec_year" = x""yes; then : $as_echo "#define HAVE_LIBSYBDB_MSLIB 1" >>confdefs.h fi odbx_saved_libs=${LIBS}; LIBS="" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dgettext" >&5 $as_echo_n "checking for library containing dgettext... " >&6; } if test "${ac_cv_search_dgettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dgettext (); int main () { return dgettext (); ; return 0; } _ACEOF for ac_lib in '' intl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_dgettext=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if test "${ac_cv_search_dgettext+set}" = set; then : break fi done if test "${ac_cv_search_dgettext+set}" = set; then : else ac_cv_search_dgettext=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dgettext" >&5 $as_echo "$ac_cv_search_dgettext" >&6; } ac_res=$ac_cv_search_dgettext if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" LIBMSSQL="$LIBMSSQL $LIBS" fi LIBS=${odbx_saved_libs} ;; mysql) for ac_header in mysql.h do : ac_fn_c_check_header_compile "$LINENO" "mysql.h" "ac_cv_header_mysql_h" " #ifdef HAVE_WINDOWS_H #include #endif " if test "x$ac_cv_header_mysql_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_MYSQL_H 1 _ACEOF else as_fn_error "mysql header (mysql.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mysql_init in -lmysqlclient_r" >&5 $as_echo_n "checking for mysql_init in -lmysqlclient_r... " >&6; } if test "${ac_cv_lib_mysqlclient_r_mysql_init+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lmysqlclient_r $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char mysql_init (); int main () { return mysql_init (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_mysqlclient_r_mysql_init=yes else ac_cv_lib_mysqlclient_r_mysql_init=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mysqlclient_r_mysql_init" >&5 $as_echo "$ac_cv_lib_mysqlclient_r_mysql_init" >&6; } if test "x$ac_cv_lib_mysqlclient_r_mysql_init" = x""yes; then : $as_echo "#define HAVE_LIBMYSQLCLIENT_R 1" >>confdefs.h LIBMYSQL="mysqlclient_r" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mysql_init in -lmysqlclient" >&5 $as_echo_n "checking for mysql_init in -lmysqlclient... " >&6; } if test "${ac_cv_lib_mysqlclient_mysql_init+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lmysqlclient $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char mysql_init (); int main () { return mysql_init (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_mysqlclient_mysql_init=yes else ac_cv_lib_mysqlclient_mysql_init=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mysqlclient_mysql_init" >&5 $as_echo "$ac_cv_lib_mysqlclient_mysql_init" >&6; } if test "x$ac_cv_lib_mysqlclient_mysql_init" = x""yes; then : $as_echo "#define HAVE_LIBMYSQLCLIENT 1" >>confdefs.h LIBMYSQL="mysqlclient" else odbx_saved_libs=${LIBS}; LIBS="-lmysql" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main() { mysql_init( NULL ); return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for mysql_init in -lmysql... yes" >&5 $as_echo "checking for mysql_init in -lmysql... yes" >&6; } $as_echo "#define HAVE_LIBMYSQL 1" >>confdefs.h LIBMYSQL="mysql" else { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for mysql_init in -lmysql... no" >&5 $as_echo "checking for mysql_init in -lmysql... no" >&6; } as_fn_error "mysql client library (libmysqlclient_r, libmysqlclient or libmysql) not found" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=${odbx_saved_libs} fi fi odbx_saved_libs=${LIBS}; LIBS="-l$LIBMYSQL" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef HAVE_WINDOWS_H #include #endif #include #include int main() { mysql_next_result( NULL ); return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for mysql_next_result in -l$LIBMYSQL... yes" >&5 $as_echo "checking for mysql_next_result in -l$LIBMYSQL... yes" >&6; } $as_echo "#define HAVE_MYSQL_NEXT_RESULT 1" >>confdefs.h else { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for mysql_next_result in -l$LIBMYSQL... no" >&5 $as_echo "checking for mysql_next_result in -l$LIBMYSQL... no" >&6; } fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=${odbx_saved_libs} { $as_echo "$as_me:${as_lineno-$LINENO}: checking for compress in -lz" >&5 $as_echo_n "checking for compress in -lz... " >&6; } if test "${ac_cv_lib_z_compress+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lz $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char compress (); int main () { return compress (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_z_compress=yes else ac_cv_lib_z_compress=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_compress" >&5 $as_echo "$ac_cv_lib_z_compress" >&6; } if test "x$ac_cv_lib_z_compress" = x""yes; then : LIBMYSQL="${LIBMYSQL} -lz" fi ;; odbc) for ac_header in sql.h do : ac_fn_c_check_header_compile "$LINENO" "sql.h" "ac_cv_header_sql_h" " #ifdef HAVE_WINDEF_H #include #endif " if test "x$ac_cv_header_sql_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SQL_H 1 _ACEOF else as_fn_error "odbc header (sql.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SQLConnect in -lodbc" >&5 $as_echo_n "checking for SQLConnect in -lodbc... " >&6; } if test "${ac_cv_lib_odbc_SQLConnect+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lodbc $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char SQLConnect (); int main () { return SQLConnect (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_odbc_SQLConnect=yes else ac_cv_lib_odbc_SQLConnect=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_odbc_SQLConnect" >&5 $as_echo "$ac_cv_lib_odbc_SQLConnect" >&6; } if test "x$ac_cv_lib_odbc_SQLConnect" = x""yes; then : $as_echo "#define HAVE_LIBODBC 1" >>confdefs.h LIBODBC="odbc" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SQLConnect in -liodbc" >&5 $as_echo_n "checking for SQLConnect in -liodbc... " >&6; } if test "${ac_cv_lib_iodbc_SQLConnect+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-liodbc $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char SQLConnect (); int main () { return SQLConnect (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_iodbc_SQLConnect=yes else ac_cv_lib_iodbc_SQLConnect=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_iodbc_SQLConnect" >&5 $as_echo "$ac_cv_lib_iodbc_SQLConnect" >&6; } if test "x$ac_cv_lib_iodbc_SQLConnect" = x""yes; then : $as_echo "#define HAVE_LIBODBC 1" >>confdefs.h LIBODBC="iodbc" else odbx_saved_libs=${LIBS}; LIBS="-lodbc32" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include int main() { SQLConnect( NULL, NULL, 0, NULL, 0, NULL, 0 ); return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for SQLConnect in -lodbc32... yes" >&5 $as_echo "checking for SQLConnect in -lodbc32... yes" >&6; } $as_echo "#define HAVE_LIBODBC 1" >>confdefs.h LIBODBC="odbc32" else { $as_echo "$as_me:${as_lineno-$LINENO}: result: checking for SQLConnect in -lodbc32... no" >&5 $as_echo "checking for SQLConnect in -lodbc32... no" >&6; } as_fn_error "odbc library (libodbc, libiodbc or libodbc32) not found" "$LINENO" 5 fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=${odbx_saved_libs} fi fi ;; oracle) for ac_header in oci.h do : ac_fn_c_check_header_mongrel "$LINENO" "oci.h" "ac_cv_header_oci_h" "$ac_includes_default" if test "x$ac_cv_header_oci_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_OCI_H 1 _ACEOF else as_fn_error "oracle header (oci.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIInitialize in -lclntsh" >&5 $as_echo_n "checking for OCIInitialize in -lclntsh... " >&6; } if test "${ac_cv_lib_clntsh_OCIInitialize+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lclntsh $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char OCIInitialize (); int main () { return OCIInitialize (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_clntsh_OCIInitialize=yes else ac_cv_lib_clntsh_OCIInitialize=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_clntsh_OCIInitialize" >&5 $as_echo "$ac_cv_lib_clntsh_OCIInitialize" >&6; } if test "x$ac_cv_lib_clntsh_OCIInitialize" = x""yes; then : $as_echo "#define HAVE_LIBCLNTSH 1" >>confdefs.h LIBORACLE="clntsh" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIInitialize in -loci" >&5 $as_echo_n "checking for OCIInitialize in -loci... " >&6; } if test "${ac_cv_lib_oci_OCIInitialize+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-loci $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char OCIInitialize (); int main () { return OCIInitialize (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_oci_OCIInitialize=yes else ac_cv_lib_oci_OCIInitialize=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_oci_OCIInitialize" >&5 $as_echo "$ac_cv_lib_oci_OCIInitialize" >&6; } if test "x$ac_cv_lib_oci_OCIInitialize" = x""yes; then : $as_echo "#define HAVE_LIBOCI 1" >>confdefs.h LIBORACLE="oci" else as_fn_error "oracle library (clntsh or oci) not found" "$LINENO" 5 fi fi as_ac_Lib=`$as_echo "ac_cv_lib_$LIBORACLE''_OCILobWrite2" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCILobWrite2 in -l$LIBORACLE" >&5 $as_echo_n "checking for OCILobWrite2 in -l$LIBORACLE... " >&6; } if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-l$LIBORACLE $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char OCILobWrite2 (); int main () { return OCILobWrite2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$as_ac_Lib=yes" else eval "$as_ac_Lib=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval as_val=\$$as_ac_Lib if test "x$as_val" = x""yes; then : $as_echo "#define HAVE_OCILOBWRITE2 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lkernel32" >&5 $as_echo_n "checking for main in -lkernel32... " >&6; } if test "${ac_cv_lib_kernel32_main+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lkernel32 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { return main (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_kernel32_main=yes else ac_cv_lib_kernel32_main=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kernel32_main" >&5 $as_echo "$ac_cv_lib_kernel32_main" >&6; } if test "x$ac_cv_lib_kernel32_main" = x""yes; then : $as_echo "#define HAVE_SETENVIRONMENTVARIABLE 1" >>confdefs.h LIBORACLE="$LIBORACLE -lkernel32" fi ;; pgsql) for ac_header in libpq-fe.h do : ac_fn_c_check_header_mongrel "$LINENO" "libpq-fe.h" "ac_cv_header_libpq_fe_h" "$ac_includes_default" if test "x$ac_cv_header_libpq_fe_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBPQ_FE_H 1 _ACEOF else as_fn_error "postgresql header (libpq-fe.h) not found" "$LINENO" 5 fi done for ac_header in limits.h do : ac_fn_c_check_header_mongrel "$LINENO" "limits.h" "ac_cv_header_limits_h" "$ac_includes_default" if test "x$ac_cv_header_limits_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIMITS_H 1 _ACEOF else as_fn_error "system limits not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PQconnectdb in -lpq" >&5 $as_echo_n "checking for PQconnectdb in -lpq... " >&6; } if test "${ac_cv_lib_pq_PQconnectdb+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpq $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char PQconnectdb (); int main () { return PQconnectdb (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_pq_PQconnectdb=yes else ac_cv_lib_pq_PQconnectdb=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pq_PQconnectdb" >&5 $as_echo "$ac_cv_lib_pq_PQconnectdb" >&6; } if test "x$ac_cv_lib_pq_PQconnectdb" = x""yes; then : $as_echo "#define HAVE_LIBPQ 1" >>confdefs.h LIBPGSQL="pq" else as_fn_error "postgresql library (libpq) not found" "$LINENO" 5 fi as_ac_Lib=`$as_echo "ac_cv_lib_$LIBPGSQL''_PQescapeStringConn" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PQescapeStringConn in -l$LIBPGSQL" >&5 $as_echo_n "checking for PQescapeStringConn in -l$LIBPGSQL... " >&6; } if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-l$LIBPGSQL $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char PQescapeStringConn (); int main () { return PQescapeStringConn (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$as_ac_Lib=yes" else eval "$as_ac_Lib=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval as_val=\$$as_ac_Lib if test "x$as_val" = x""yes; then : $as_echo "#define HAVE_PQ_ESCAPE_STRING_CONN 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lws2_32" >&5 $as_echo_n "checking for main in -lws2_32... " >&6; } if test "${ac_cv_lib_ws2_32_main+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lws2_32 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { return main (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_ws2_32_main=yes else ac_cv_lib_ws2_32_main=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ws2_32_main" >&5 $as_echo "$ac_cv_lib_ws2_32_main" >&6; } if test "x$ac_cv_lib_ws2_32_main" = x""yes; then : $as_echo "#define HAVE_SELECT 1" >>confdefs.h LIBPGSQL="$LIBPGSQL -lws2_32" fi ;; sqlite) for ac_header in sqlite.h do : ac_fn_c_check_header_mongrel "$LINENO" "sqlite.h" "ac_cv_header_sqlite_h" "$ac_includes_default" if test "x$ac_cv_header_sqlite_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SQLITE_H 1 _ACEOF else as_fn_error "sqlite header (sqlite.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sqlite_get_table in -lsqlite" >&5 $as_echo_n "checking for sqlite_get_table in -lsqlite... " >&6; } if test "${ac_cv_lib_sqlite_sqlite_get_table+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsqlite $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char sqlite_get_table (); int main () { return sqlite_get_table (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_sqlite_sqlite_get_table=yes else ac_cv_lib_sqlite_sqlite_get_table=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sqlite_sqlite_get_table" >&5 $as_echo "$ac_cv_lib_sqlite_sqlite_get_table" >&6; } if test "x$ac_cv_lib_sqlite_sqlite_get_table" = x""yes; then : $as_echo "#define HAVE_LIBSQLITE 1" >>confdefs.h LIBSQLITE="sqlite" else as_fn_error "sqlite library (libsqlite) not found" "$LINENO" 5 fi ;; sqlite3) for ac_header in sqlite3.h do : ac_fn_c_check_header_mongrel "$LINENO" "sqlite3.h" "ac_cv_header_sqlite3_h" "$ac_includes_default" if test "x$ac_cv_header_sqlite3_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SQLITE3_H 1 _ACEOF else as_fn_error "sqlite3 header (sqlite3.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sqlite3_step in -lsqlite3" >&5 $as_echo_n "checking for sqlite3_step in -lsqlite3... " >&6; } if test "${ac_cv_lib_sqlite3_sqlite3_step+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsqlite3 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char sqlite3_step (); int main () { return sqlite3_step (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_sqlite3_sqlite3_step=yes else ac_cv_lib_sqlite3_sqlite3_step=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sqlite3_sqlite3_step" >&5 $as_echo "$ac_cv_lib_sqlite3_sqlite3_step" >&6; } if test "x$ac_cv_lib_sqlite3_sqlite3_step" = x""yes; then : $as_echo "#define HAVE_LIBSQLITE3 1" >>confdefs.h LIBSQLITE3="sqlite3" else as_fn_error "sqlite3 library (libsqlite3) not found" "$LINENO" 5 fi as_ac_Lib=`$as_echo "ac_cv_lib_$LIBSQLITE3''_sqlite3_prepare_v2" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sqlite3_prepare_v2 in -l$LIBSQLITE3" >&5 $as_echo_n "checking for sqlite3_prepare_v2 in -l$LIBSQLITE3... " >&6; } if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-l$LIBSQLITE3 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char sqlite3_prepare_v2 (); int main () { return sqlite3_prepare_v2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$as_ac_Lib=yes" else eval "$as_ac_Lib=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval as_val=\$$as_ac_Lib if test "x$as_val" = x""yes; then : $as_echo "#define HAVE_SQLITE3_PREPARE_V2 1" >>confdefs.h fi as_ac_Lib=`$as_echo "ac_cv_lib_$LIBSQLITE3''_sqlite3_table_column_metadata" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sqlite3_table_column_metadata in -l$LIBSQLITE3" >&5 $as_echo_n "checking for sqlite3_table_column_metadata in -l$LIBSQLITE3... " >&6; } if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-l$LIBSQLITE3 $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char sqlite3_table_column_metadata (); int main () { return sqlite3_table_column_metadata (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$as_ac_Lib=yes" else eval "$as_ac_Lib=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi eval ac_res=\$$as_ac_Lib { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval as_val=\$$as_ac_Lib if test "x$as_val" = x""yes; then : $as_echo "#define HAVE_SQLITE3_TABLE_COLUMN_METADATA 1" >>confdefs.h fi odbx_saved_libs=${LIBS}; LIBS="" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dgettext" >&5 $as_echo_n "checking for library containing dgettext... " >&6; } if test "${ac_cv_search_dgettext+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dgettext (); int main () { return dgettext (); ; return 0; } _ACEOF for ac_lib in '' intl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_dgettext=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if test "${ac_cv_search_dgettext+set}" = set; then : break fi done if test "${ac_cv_search_dgettext+set}" = set; then : else ac_cv_search_dgettext=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dgettext" >&5 $as_echo "$ac_cv_search_dgettext" >&6; } ac_res=$ac_cv_search_dgettext if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" LIBSQLITE3="$LIBSQLITE3 $LIBS" fi LIBS=${odbx_saved_libs} ;; sybase) for ac_header in ctpublic.h do : ac_fn_c_check_header_mongrel "$LINENO" "ctpublic.h" "ac_cv_header_ctpublic_h" "$ac_includes_default" if test "x$ac_cv_header_ctpublic_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_CTPUBLIC_H 1 _ACEOF else as_fn_error "sybase header (ctpublic.h) not found" "$LINENO" 5 fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ct_init in -lct" >&5 $as_echo_n "checking for ct_init in -lct... " >&6; } if test "${ac_cv_lib_ct_ct_init+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lct $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ct_init (); int main () { return ct_init (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_ct_ct_init=yes else ac_cv_lib_ct_ct_init=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ct_ct_init" >&5 $as_echo "$ac_cv_lib_ct_ct_init" >&6; } if test "x$ac_cv_lib_ct_ct_init" = x""yes; then : $as_echo "#define HAVE_LIBCT 1" >>confdefs.h LIBSYBASE="ct" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ct_init in -lsybct_r" >&5 $as_echo_n "checking for ct_init in -lsybct_r... " >&6; } if test "${ac_cv_lib_sybct_r_ct_init+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsybct_r $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ct_init (); int main () { return ct_init (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_sybct_r_ct_init=yes else ac_cv_lib_sybct_r_ct_init=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sybct_r_ct_init" >&5 $as_echo "$ac_cv_lib_sybct_r_ct_init" >&6; } if test "x$ac_cv_lib_sybct_r_ct_init" = x""yes; then : $as_echo "#define HAVE_LIBSYBCT_R 1" >>confdefs.h LIBSYBASE="sybct_r" else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ct_init in -lsybct" >&5 $as_echo_n "checking for ct_init in -lsybct... " >&6; } if test "${ac_cv_lib_sybct_ct_init+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsybct $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char ct_init (); int main () { return ct_init (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_sybct_ct_init=yes else ac_cv_lib_sybct_ct_init=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sybct_ct_init" >&5 $as_echo "$ac_cv_lib_sybct_ct_init" >&6; } if test "x$ac_cv_lib_sybct_ct_init" = x""yes; then : $as_echo "#define HAVE_LIBSYBCT 1" >>confdefs.h LIBSYBASE="sybct" else as_fn_error "sybase library (libct, libsybct_r or libsyb) not found" "$LINENO" 5 fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cs_config in -lsybcs" >&5 $as_echo_n "checking for cs_config in -lsybcs... " >&6; } if test "${ac_cv_lib_sybcs_cs_config+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsybcs $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char cs_config (); int main () { return cs_config (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_sybcs_cs_config=yes else ac_cv_lib_sybcs_cs_config=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sybcs_cs_config" >&5 $as_echo "$ac_cv_lib_sybcs_cs_config" >&6; } if test "x$ac_cv_lib_sybcs_cs_config" = x""yes; then : $as_echo "#define HAVE_LIBSYBCS 1" >>confdefs.h LIBSYBASE="${LIBSYBASE} -lsybcs" fi ;; esac done # Generate Makefiles ac_config_files="$ac_config_files Makefile backends/Makefile backends/firebird/Makefile backends/mssql/Makefile backends/mysql/Makefile backends/odbc/Makefile backends/oracle/Makefile backends/pgsql/Makefile backends/sqlite/Makefile backends/sqlite3/Makefile backends/sybase/Makefile doc/Makefile doc/Doxyfile lib/Makefile po/Makefile.in test/Makefile utils/Makefile utils/doc/Makefile utils/po/Makefile.in opendbx.spec opendbx.pc opendbxplus.pc" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then as_fn_error "conditional \"am__fastdepCXX\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLEMAN_TRUE}" && test -z "${ENABLEMAN_FALSE}"; then as_fn_error "conditional \"ENABLEMAN\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${SINGLELIB_TRUE}" && test -z "${SINGLELIB_FALSE}"; then as_fn_error "conditional \"SINGLELIB\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLETEST_TRUE}" && test -z "${ENABLETEST_FALSE}"; then as_fn_error "conditional \"ENABLETEST\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${ENABLEUTILS_TRUE}" && test -z "${ENABLEUTILS_FALSE}"; then as_fn_error "conditional \"ENABLEUTILS\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by opendbx $as_me 1.4.6, which was generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ opendbx config.status 1.4.6 configured by $0, generated by GNU Autoconf 2.65, with options \\"\$ac_cs_config\\" Copyright (C) 2009 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # # Capture the value of obsolete ALL_LINGUAS because we need it to compute # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it # from automake < 1.5. eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' # Capture the value of LINGUAS because we need it to compute CATALOGS. LINGUAS="${LINGUAS-%UNSET%}" AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`' DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`' predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`' postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`' predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`' postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`' compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`' LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`' old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`' GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`' lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`' lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`' archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`' enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`' export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`' old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`' inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`' link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`' fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`' export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`' prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`' file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`' hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`' compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`' predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`' predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`' compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`' LTCC='$LTCC' LTCFLAGS='$LTCFLAGS' compiler='$compiler_DEFAULT' # Quote evaled strings. for var in SED \ GREP \ EGREP \ FGREP \ LD \ NM \ LN_S \ lt_SP2NL \ lt_NL2SP \ reload_flag \ deplibs_check_method \ file_magic_cmd \ AR \ AR_FLAGS \ STRIP \ RANLIB \ CC \ CFLAGS \ compiler \ lt_cv_sys_global_symbol_pipe \ lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ SHELL \ ECHO \ lt_prog_compiler_no_builtin_flag \ lt_prog_compiler_wl \ lt_prog_compiler_pic \ lt_prog_compiler_static \ lt_cv_prog_compiler_c_o \ need_locks \ DSYMUTIL \ NMEDIT \ LIPO \ OTOOL \ OTOOL64 \ shrext_cmds \ export_dynamic_flag_spec \ whole_archive_flag_spec \ compiler_needs_object \ with_gnu_ld \ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ fix_srcfile_path \ exclude_expsyms \ include_expsyms \ file_list_spec \ variables_saved_for_relink \ libname_spec \ library_names_spec \ soname_spec \ finish_eval \ old_striplib \ striplib \ compiler_lib_search_dirs \ predep_objects \ postdep_objects \ predeps \ postdeps \ compiler_lib_search_path \ LD_CXX \ compiler_CXX \ lt_prog_compiler_no_builtin_flag_CXX \ lt_prog_compiler_wl_CXX \ lt_prog_compiler_pic_CXX \ lt_prog_compiler_static_CXX \ lt_cv_prog_compiler_c_o_CXX \ export_dynamic_flag_spec_CXX \ whole_archive_flag_spec_CXX \ compiler_needs_object_CXX \ with_gnu_ld_CXX \ allow_undefined_flag_CXX \ no_undefined_flag_CXX \ hardcode_libdir_flag_spec_CXX \ hardcode_libdir_flag_spec_ld_CXX \ hardcode_libdir_separator_CXX \ fix_srcfile_path_CXX \ exclude_expsyms_CXX \ include_expsyms_CXX \ file_list_spec_CXX \ compiler_lib_search_dirs_CXX \ predep_objects_CXX \ postdep_objects_CXX \ predeps_CXX \ postdeps_CXX \ compiler_lib_search_path_CXX; do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds \ old_postinstall_cmds \ old_postuninstall_cmds \ old_archive_cmds \ extract_expsyms_cmds \ old_archive_from_new_cmds \ old_archive_from_expsyms_cmds \ archive_cmds \ archive_expsym_cmds \ module_cmds \ module_expsym_cmds \ export_symbols_cmds \ prelink_cmds \ postinstall_cmds \ postuninstall_cmds \ finish_cmds \ sys_lib_search_path_spec \ sys_lib_dlsearch_path_spec \ old_archive_cmds_CXX \ old_archive_from_new_cmds_CXX \ old_archive_from_expsyms_cmds_CXX \ archive_cmds_CXX \ archive_expsym_cmds_CXX \ module_cmds_CXX \ module_expsym_cmds_CXX \ export_symbols_cmds_CXX \ prelink_cmds_CXX; do case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in *[\\\\\\\`\\"\\\$]*) eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ;; *) eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ;; esac done # Fix-up fallback echo if it was mangled by the above quoting rules. case \$lt_ECHO in *'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ;; esac ac_aux_dir='$ac_aux_dir' xsi_shell='$xsi_shell' lt_shell_append='$lt_shell_append' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "\${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='$PACKAGE' VERSION='$VERSION' TIMESTAMP='$TIMESTAMP' RM='$RM' ofile='$ofile' _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "backends/Makefile") CONFIG_FILES="$CONFIG_FILES backends/Makefile" ;; "backends/firebird/Makefile") CONFIG_FILES="$CONFIG_FILES backends/firebird/Makefile" ;; "backends/mssql/Makefile") CONFIG_FILES="$CONFIG_FILES backends/mssql/Makefile" ;; "backends/mysql/Makefile") CONFIG_FILES="$CONFIG_FILES backends/mysql/Makefile" ;; "backends/odbc/Makefile") CONFIG_FILES="$CONFIG_FILES backends/odbc/Makefile" ;; "backends/oracle/Makefile") CONFIG_FILES="$CONFIG_FILES backends/oracle/Makefile" ;; "backends/pgsql/Makefile") CONFIG_FILES="$CONFIG_FILES backends/pgsql/Makefile" ;; "backends/sqlite/Makefile") CONFIG_FILES="$CONFIG_FILES backends/sqlite/Makefile" ;; "backends/sqlite3/Makefile") CONFIG_FILES="$CONFIG_FILES backends/sqlite3/Makefile" ;; "backends/sybase/Makefile") CONFIG_FILES="$CONFIG_FILES backends/sybase/Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "doc/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/Doxyfile" ;; "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;; "utils/doc/Makefile") CONFIG_FILES="$CONFIG_FILES utils/doc/Makefile" ;; "utils/po/Makefile.in") CONFIG_FILES="$CONFIG_FILES utils/po/Makefile.in" ;; "opendbx.spec") CONFIG_FILES="$CONFIG_FILES opendbx.spec" ;; "opendbx.pc") CONFIG_FILES="$CONFIG_FILES opendbx.pc" ;; "opendbxplus.pc") CONFIG_FILES="$CONFIG_FILES opendbxplus.pc" ;; *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || as_fn_error "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || as_fn_error "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "po-directories":C) for ac_file in $CONFIG_FILES; do # Support "outfile[:infile[:infile...]]" case "$ac_file" in *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; esac # PO directories have a Makefile.in generated from Makefile.in.in. case "$ac_file" in */Makefile.in) # Adjust a relative srcdir. ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` # In autoconf-2.13 it is called $ac_given_srcdir. # In autoconf-2.50 it is called $srcdir. test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" case "$ac_given_srcdir" in .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; /*) top_srcdir="$ac_given_srcdir" ;; *) top_srcdir="$ac_dots$ac_given_srcdir" ;; esac # Treat a directory as a PO directory if and only if it has a # POTFILES.in file. This allows packages to have multiple PO # directories under different names or in different locations. if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then rm -f "$ac_dir/POTFILES" test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" POMAKEFILEDEPS="POTFILES.in" # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend # on $ac_dir but don't depend on user-specified configuration # parameters. if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then # The LINGUAS file contains the set of available languages. if test -n "$OBSOLETE_ALL_LINGUAS"; then test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" fi ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` # Hide the ALL_LINGUAS assigment from automake < 1.5. eval 'ALL_LINGUAS''=$ALL_LINGUAS_' POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" else # The set of available languages was given in configure.in. # Hide the ALL_LINGUAS assigment from automake < 1.5. eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' fi # Compute POFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) # Compute UPDATEPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) # Compute DUMMYPOFILES # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) # Compute GMOFILES # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) case "$ac_given_srcdir" in .) srcdirpre= ;; *) srcdirpre='$(srcdir)/' ;; esac POFILES= UPDATEPOFILES= DUMMYPOFILES= GMOFILES= for lang in $ALL_LINGUAS; do POFILES="$POFILES $srcdirpre$lang.po" UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" DUMMYPOFILES="$DUMMYPOFILES $lang.nop" GMOFILES="$GMOFILES $srcdirpre$lang.gmo" done # CATALOGS depends on both $ac_dir and the user's LINGUAS # environment variable. INST_LINGUAS= if test -n "$ALL_LINGUAS"; then for presentlang in $ALL_LINGUAS; do useit=no if test "%UNSET%" != "$LINGUAS"; then desiredlanguages="$LINGUAS" else desiredlanguages="$ALL_LINGUAS" fi for desiredlang in $desiredlanguages; do # Use the presentlang catalog if desiredlang is # a. equal to presentlang, or # b. a variant of presentlang (because in this case, # presentlang can be used as a fallback for messages # which are not translated in the desiredlang catalog). case "$desiredlang" in "$presentlang"*) useit=yes;; esac done if test $useit = yes; then INST_LINGUAS="$INST_LINGUAS $presentlang" fi done fi CATALOGS= if test -n "$INST_LINGUAS"; then for lang in $INST_LINGUAS; do CATALOGS="$CATALOGS $lang.gmo" done fi test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do if test -f "$f"; then case "$f" in *.orig | *.bak | *~) ;; *) cat "$f" >> "$ac_dir/Makefile" ;; esac fi done fi ;; esac done ;; "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; "libtool":C) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006, 2007, 2008 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. # # GNU Libtool is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # As a special exception to the GNU General Public License, # if you distribute this file as part of a program or library that # is built using GNU Libtool, you may include this file under the # same distribution terms that you use for the rest of that program. # # GNU Libtool is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Libtool; see the file COPYING. If not, a copy # can be downloaded from http://www.gnu.org/licenses/gpl.html, or # obtained by writing to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # The names of the tagged configurations supported by this script. available_tags="CXX " # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Assembler program. AS=$AS # DLL creation program. DLLTOOL=$DLLTOOL # Object dumper program. OBJDUMP=$OBJDUMP # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # whether the shell understands "unset". lt_unset=$lt_unset # turn spaces into newlines. SP2NL=$lt_lt_SP2NL # turn newlines into spaces. NL2SP=$lt_lt_NL2SP # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == "file_magic". file_magic_cmd=$lt_file_magic_cmd # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # Transform the output of nm in a C name address pair when lib prefix is needed. global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix # The name of the directory that contains temporary libtool files. objdir=$objdir # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that does not interpret backslashes. ECHO=$lt_ECHO # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Tool to manipulate archived DWARF debug symbol files on Mac OS X. DSYMUTIL=$lt_DSYMUTIL # Tool to change global to local symbols on Mac OS X. NMEDIT=$lt_NMEDIT # Tool to manipulate fat objects and archives on Mac OS X. LIPO=$lt_LIPO # ldd/readelf like tool for Mach-O binaries on Mac OS X. OTOOL=$lt_OTOOL # ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. OTOOL64=$lt_OTOOL64 # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects postdep_objects=$lt_postdep_objects predeps=$lt_predeps postdeps=$lt_postdeps # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path # ### END LIBTOOL CONFIG _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) case $xsi_shell in yes) cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac } # func_basename file func_basename () { func_basename_result="${1##*/}" } # func_dirname_and_basename file append nondir_replacement # perform func_basename and func_dirname in a single function # call: # dirname: Compute the dirname of FILE. If nonempty, # add APPEND to the result, otherwise set result # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. # value retuned in "$func_basename_result" # Implementation must be kept synchronized with func_dirname # and func_basename. For efficiency, we do not delegate to # those functions but instead duplicate the functionality here. func_dirname_and_basename () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac func_basename_result="${1##*/}" } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). func_stripname () { # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"} } # func_opt_split func_opt_split () { func_opt_split_opt=${1%%=*} func_opt_split_arg=${1#*=} } # func_lo2o object func_lo2o () { case ${1} in *.lo) func_lo2o_result=${1%.lo}.${objext} ;; *) func_lo2o_result=${1} ;; esac } # func_xform libobj-or-source func_xform () { func_xform_result=${1%.*}.lo } # func_arith arithmetic-term... func_arith () { func_arith_result=$(( $* )) } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=${#1} } _LT_EOF ;; *) # Bourne compatible functions. cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_basename file func_basename () { func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac } # sed scripts: my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' my_sed_long_arg='1s/^-[^=]*=//' # func_opt_split func_opt_split () { func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` } # func_lo2o object func_lo2o () { func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` } # func_xform libobj-or-source func_xform () { func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` } # func_arith arithmetic-term... func_arith () { func_arith_result=`expr "$@"` } # func_len string # STRING may not start with a hyphen. func_len () { func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` } _LT_EOF esac case $lt_shell_append in yes) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$1+=\$2" } _LT_EOF ;; *) cat << \_LT_EOF >> "$cfgfile" # func_append var value # Append VALUE to the end of shell variable VAR. func_append () { eval "$1=\$$1\$2" } _LT_EOF ;; esac sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" cat <<_LT_EOF >> "$ofile" # ### BEGIN LIBTOOL TAG CONFIG: CXX # The linker used to build libraries. LD=$lt_LD_CXX # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds_CXX # A language specific compiler. CC=$lt_compiler_CXX # Is the compiler the GNU compiler? with_gcc=$GCC_CXX # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl_CXX # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic_CXX # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static_CXX # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc_CXX # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX # Whether the compiler copes with passing no objects directly. compiler_needs_object=$lt_compiler_needs_object_CXX # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds_CXX archive_expsym_cmds=$lt_archive_expsym_cmds_CXX # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds_CXX module_expsym_cmds=$lt_module_expsym_cmds_CXX # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld_CXX # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag_CXX # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag_CXX # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct_CXX # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary and the resulting library dependency is # "absolute",i.e impossible to change by setting \${shlibpath_var} if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute_CXX # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L_CXX # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic_CXX # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath_CXX # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs_CXX # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path_CXX # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols_CXX # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds_CXX # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms_CXX # Symbols that must always be exported. include_expsyms=$lt_include_expsyms_CXX # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds_CXX # Specify filename containing input files. file_list_spec=$lt_file_list_spec_CXX # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action_CXX # The directories searched by this compiler when creating a shared library. compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX # Dependencies to place before and after the objects being linked to # create a shared library. predep_objects=$lt_predep_objects_CXX postdep_objects=$lt_postdep_objects_CXX predeps=$lt_predeps_CXX postdeps=$lt_postdeps_CXX # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_compiler_lib_search_path_CXX # ### END LIBTOOL TAG CONFIG: CXX _LT_EOF ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit $? fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi opendbx-1.4.6/aclocal.m40000644000175000017500000011436411765211276011763 00000000000000# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, [m4_warning([this file was generated for autoconf 2.65. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # intlmacosx.m4 serial 1 (gettext-0.17) dnl Copyright (C) 2004-2007 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl dnl This file can can be used in projects which are not available under dnl the GNU General Public License or the GNU Library General Public dnl License but which still want to provide support for the GNU gettext dnl functionality. dnl Please note that the actual code of the GNU gettext library is covered dnl by the GNU Library General Public License, and the rest of the GNU dnl gettext package package is covered by the GNU General Public License. dnl They are *not* in the public domain. dnl Checks for special options needed on MacOS X. dnl Defines INTL_MACOSX_LIBS. AC_DEFUN([gt_INTL_MACOSX], [ dnl Check for API introduced in MacOS X 10.2. AC_CACHE_CHECK([for CFPreferencesCopyAppValue], gt_cv_func_CFPreferencesCopyAppValue, [gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" AC_TRY_LINK([#include ], [CFPreferencesCopyAppValue(NULL, NULL)], [gt_cv_func_CFPreferencesCopyAppValue=yes], [gt_cv_func_CFPreferencesCopyAppValue=no]) LIBS="$gt_save_LIBS"]) if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], 1, [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) fi dnl Check for API introduced in MacOS X 10.3. AC_CACHE_CHECK([for CFLocaleCopyCurrent], gt_cv_func_CFLocaleCopyCurrent, [gt_save_LIBS="$LIBS" LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" AC_TRY_LINK([#include ], [CFLocaleCopyCurrent();], [gt_cv_func_CFLocaleCopyCurrent=yes], [gt_cv_func_CFLocaleCopyCurrent=no]) LIBS="$gt_save_LIBS"]) if test $gt_cv_func_CFLocaleCopyCurrent = yes; then AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], 1, [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) fi INTL_MACOSX_LIBS= if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" fi AC_SUBST([INTL_MACOSX_LIBS]) ]) # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless `enable' is passed literally. # For symmetry, `disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful (and sometimes confusing) to the casual installer], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([m4/gettext.m4]) m4_include([m4/iconv.m4]) m4_include([m4/lib-ld.m4]) m4_include([m4/lib-link.m4]) m4_include([m4/lib-prefix.m4]) m4_include([m4/libtool.m4]) m4_include([m4/ltoptions.m4]) m4_include([m4/ltsugar.m4]) m4_include([m4/ltversion.m4]) m4_include([m4/lt~obsolete.m4]) m4_include([m4/nls.m4]) m4_include([m4/po.m4]) m4_include([m4/progtest.m4]) opendbx-1.4.6/config.h.in0000644000175000017500000001673511765211300012135 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ /* Define to 1 if translation of program messages to the user's native language is requested. */ #undef ENABLE_NLS /* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework. */ #undef HAVE_CFLOCALECOPYCURRENT /* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework. */ #undef HAVE_CFPREFERENCESCOPYAPPVALUE /* Define to 1 if you have the header file. */ #undef HAVE_CTPUBLIC_H /* Define if the GNU dcgettext() function is already present or preinstalled. */ #undef HAVE_DCGETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the `getopt' function. */ #undef HAVE_GETOPT /* Define to 1 if you have the header file. */ #undef HAVE_GETOPT_H /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT /* Define to 1 if you have the header file. */ #undef HAVE_IBASE_H /* Define if you have the iconv() function and it works. */ #undef HAVE_ICONV /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Have -lclntsh */ #undef HAVE_LIBCLNTSH /* Have -lct */ #undef HAVE_LIBCT /* Have -ldl */ #undef HAVE_LIBDL /* Have -lfbclient */ #undef HAVE_LIBFBCLIENT /* Have -lgds32 */ #undef HAVE_LIBGDS32 /* Define to 1 if you have the header file. */ #undef HAVE_LIBINTL_H /* Have -lmysql */ #undef HAVE_LIBMYSQL /* Have -lmysqlclient */ #undef HAVE_LIBMYSQLCLIENT /* Have -lmysqlclient_r */ #undef HAVE_LIBMYSQLCLIENT_R /* Have -lncurses */ #undef HAVE_LIBNCURSES /* Have liboci */ #undef HAVE_LIBOCI /* Have -lodbc32 */ #undef HAVE_LIBODBC /* Have -lpq */ #undef HAVE_LIBPQ /* Define to 1 if you have the header file. */ #undef HAVE_LIBPQ_FE_H /* Have -lreadline */ #undef HAVE_LIBREADLINE /* Have -lsqlite */ #undef HAVE_LIBSQLITE /* Have -lsqlite3 */ #undef HAVE_LIBSQLITE3 /* Have -lsybcs */ #undef HAVE_LIBSYBCS /* Have -lsybct */ #undef HAVE_LIBSYBCT /* Have -lsybct_r */ #undef HAVE_LIBSYBCT_R /* Have -lsybdb */ #undef HAVE_LIBSYBDB /* Have mslib type of "struct dbdaterec" */ #undef HAVE_LIBSYBDB_MSLIB /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC /* Define to 1 if you have the `memmove' function. */ #undef HAVE_MEMMOVE /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET /* Define to 1 if you have the header file. */ #undef HAVE_MYSQL_H /* Have mysql_next_result */ #undef HAVE_MYSQL_NEXT_RESULT /* Define to 1 if you have OCILobWrite2 */ #undef HAVE_OCILOBWRITE2 /* Define to 1 if you have the header file. */ #undef HAVE_OCI_H /* Define to 1 if you have PQescapeStringConn */ #undef HAVE_PQ_ESCAPE_STRING_CONN /* Define to 1 if you have the header file. */ #undef HAVE_READLINE_HISTORY_H /* Define to 1 if you have the header file. */ #undef HAVE_READLINE_READLINE_H /* Define to 1 if your system has a GNU libc compatible `realloc' function, and to 0 otherwise. */ #undef HAVE_REALLOC /* Define to 1 if you have ws2_32.dll */ #undef HAVE_SELECT /* Define to 1 if you have the `setenv' function. */ #undef HAVE_SETENV /* Define to 1 if you have SetEnvironmentVariable */ #undef HAVE_SETENVIRONMENTVARIABLE /* Define to 1 if you have the `snprintf' function. */ #undef HAVE_SNPRINTF /* Define to 1 if you have the header file. */ #undef HAVE_SQLITE3_H /* Define to 1 if you have sqlite3_prepare_v2 */ #undef HAVE_SQLITE3_PREPARE_V2 /* Define to 1 if you have sqlite3_table_column_metadata */ #undef HAVE_SQLITE3_TABLE_COLUMN_METADATA /* Define to 1 if you have the header file. */ #undef HAVE_SQLITE_H /* Define to 1 if you have the header file. */ #undef HAVE_SQL_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strdup' function. */ #undef HAVE_STRDUP /* Define to 1 if you have the `strftime' function. */ #undef HAVE_STRFTIME /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strncasecmp' function. */ #undef HAVE_STRNCASECMP /* Define to 1 if you have the `strstr' function. */ #undef HAVE_STRSTR /* Define to 1 if you have the `strtol' function. */ #undef HAVE_STRTOL /* Define to 1 if you have the `strtoul' function. */ #undef HAVE_STRTOUL /* Define to 1 if you have the `strtoull' function. */ #undef HAVE_STRTOULL /* Define to 1 if you have the header file. */ #undef HAVE_SYBFRONT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the header file. */ #undef HAVE_WINDEF_H /* Define to 1 if you have the header file. */ #undef HAVE_WINDOWS_H /* Define to 1 if you have the header file. */ #undef HAVE_WINSOCK2_H /* Define as const if the declaration of iconv() needs const. */ #undef ICONV_CONST /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* Version number of package */ #undef VERSION /* Using Win32 API functions */ #undef WIN32 /* Define for Solaris 2.5.1 so the uint64_t typedef from , , or is not used. If the typedef were allowed, the #define below would cause a syntax error. */ #undef _UINT64_T /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to the type of a signed integer type of width exactly 64 bits if such a type exists and the standard includes do not define it. */ #undef int64_t /* Define to rpl_malloc if the replacement function should be used. */ #undef malloc /* Define to rpl_realloc if the replacement function should be used. */ #undef realloc /* Define to `unsigned int' if does not define. */ #undef size_t /* Define to `int' if does not define. */ #undef ssize_t /* Define to the type of an unsigned integer type of width exactly 64 bits if such a type exists and the standard includes do not define it. */ #undef uint64_t opendbx-1.4.6/debian/0000755000175000017500000000000011765214161011410 500000000000000opendbx-1.4.6/debian/control0000644000175000017500000001021311751176522012733 00000000000000Source: libopendbx Priority: optional Maintainer: Norbert Sendetzky Build-Depends: autoconf, automake, autotools-dev, debhelper (>= 4.0.0), libtool, libmysqlclient-dev, libpq-dev, libsqlite0-dev, libsqlite3-dev, firebird2.5-dev | firebird2.1-dev | firebird2.0-dev | firebird2-dev | firebird1.5-dev, freetds-dev, unixodbc-dev | libiodbc2-dev, libreadline-dev, libncurses-dev | libncurses5-dev, docbook2x, doxygen Build-Conflicts: autoconf2.13, automake1.4 Standards-Version: 3.7.3.0 Section: libs Package: libopendbx1 Priority: optional Section: libs Architecture: any Depends: libopendbx1-backend, ${shlibs:Depends} Description: Lightweight database access abstraction layer OpenDBX provides a simple and lightweight API for interfacing native relational database APIs in a consistent way. By using the OpenDBX API you don't have to adapt your program to the different database APIs by yourself. Package: libopendbx1-dev Priority: optional Section: libdevel Architecture: any Depends: libopendbx1 (= ${binary:Version}) Provides: libopendbx-dev Conflicts: libopendbx-dev Description: Lightweight database access abstraction layer (dev) OpenDBX provides a simple and lightweight API for interfacing native relational database APIs in a consistent way. By using the OpenDBX API you don't have to adapt your program to the different database APIs by yourself. This package contains the header file to develop backends for libopendbx Package: libopendbx1-firebird Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: Firebird backend for OpenDBX This package contains the Firebird backend for the OpenDBX database access abstraction layer. Package: libopendbx1-mssql Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: MSSQL backend for OpenDBX This package contains the MSSQL backend for the OpenDBX database access abstraction layer. Package: libopendbx1-mysql Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: MySQL backend for OpenDBX This package contains the MySQL backend for the OpenDBX database access abstaction layer. Package: libopendbx1-odbc Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: ODBC backend for OpenDBX This package contains the ODBC backend for the OpenDBX database access abstaction layer. Package: libopendbx1-pgsql Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: PostgreSQL backend for OpenDBX This package contains the PostgreSQL backend for the OpenDBX database access abstraction layer. Package: libopendbx1-sqlite Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: SQLite backend for OpenDBX This package contains the SQLite backend for the OpenDBX database access abstraction layer. Package: libopendbx1-sqlite3 Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: SQLite3 backend for OpenDBX This package contains the SQLite3 backend for the OpenDBX database access abstraction layer. Package: libopendbx1-sybase Priority: optional Section: libs Architecture: any Depends: libopendbx1 (= ${binary:Version}), ${shlibs:Depends} Provides: libopendbx1-backend Description: Sybase ctlib backend for OpenDBX This package contains the Sybase backend for the OpenDBX database access abstraction layer. Package: opendbx-utils Priority: optional Section: utils Architecture: any Depends: libopendbx1 (>= ${binary:Version}), ${shlibs:Depends} Provides: opendbx-utils Description: Utility applications using libopendbx This package provides utility applications for accessing database content directly via libopendbx opendbx-1.4.6/debian/watch0000644000175000017500000000053511425153452012362 00000000000000# Example watch control file for uscan # Rename this file to "watch" and then you can run the "uscan" command # to check for upstream updates and more. # See uscan(1) for format # Compulsory line, this is a version 2 file version=2 # Uncomment to examine a Webserver directory http://www.linuxnetworks.de/opendbx/download/libopendbx-(.*)\.tar\.gz opendbx-1.4.6/debian/rules0000755000175000017500000000672611425153452012421 00000000000000#!/usr/bin/make -f package := libopendbx1 backends := firebird mssql mysql pgsql odbc sqlite sqlite3 sybase includes := -I/usr/include/mysql -I/usr/include/postgresql tmpdir := debian/tmp # Uncomment this to turn on verbose mode. #export DH_VERBOSE=1 # These are used for cross-compiling and for saving the configure script # from having to guess our platform (since we know it already) export DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) CONFFLAGS = --build $(DEB_HOST_GNU_TYPE) else CONFFLAGS = --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) endif CFLAGS = -Wall -pedantic -std=c99 -g CXXFLAGS = -Wall -pedantic -g ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) CFLAGS += -O0 CXXFLAGS += -O0 else CFLAGS += -O2 CXXFLAGS += -O2 endif build: dh_testdir CPPFLAGS="${includes} ${CPPFLAGS}" \ CFLAGS="${CFLAGS}" \ CXXFLAGS="${CXXFLAGS}" \ ./configure ${CONFFLAGS} \ --prefix=/usr \ --disable-rpath \ --with-backends="${backends}" $(MAKE) touch build-stamp install: build dh_testdir dh_testroot dh_clean -k dh_installdirs $(MAKE) install DESTDIR="${CURDIR}/${tmpdir}" binary-arch: build install dh_testdir dh_testroot dh_installdocs -p${package} dh_installchangelogs -p${package} ChangeLog dh_installman -p${package}-dev ${tmpdir}/usr/share/man/man3/* dh_install -p${package} "${tmpdir}/usr/lib/libopendbx.so.*" "usr/lib/" dh_install -p${package} "${tmpdir}/usr/lib/libopendbxplus.so.*" "usr/lib/" dh_install -p${package} --autodest "${tmpdir}/usr/share/locale/*/*/opendbx.mo" dh_install -p${package}-dev "${tmpdir}/usr/include/opendbx/api" "usr/include/opendbx" dh_install -p${package}-dev "${tmpdir}/usr/include/opendbx/api.h" "usr/include/opendbx" dh_install -p${package}-dev "${tmpdir}/usr/lib/libopendbx.so" "${tmpdir}/usr/lib/libopendbx.*a" "usr/lib/" dh_install -p${package}-dev "${tmpdir}/usr/lib/libopendbxplus.so" "${tmpdir}/usr/lib/libopendbxplus.*a" "usr/lib/" dh_install -p${package}-dev "opendbx.pc" "usr/lib/pkgconfig/" dh_link -p${package}-dev "usr/share/doc/${package}" "usr/share/doc/${package}-dev" dh_link -p${package}-dev "usr/include/opendbx/api.h" "usr/include/odbx.h" @set -e ; \ for be in ${backends} ; do \ dh_install -p${package}-$${be} "${tmpdir}/usr/lib/opendbx/lib$${be}backend.so*" "usr/lib/opendbx/" ; \ dh_link -p${package}-$${be} "usr/share/doc/${package}" "usr/share/doc/${package}-$${be}" ; \ done dh_installman -popendbx-utils ${tmpdir}/usr/share/man/man1/* dh_install -popendbx-utils "${tmpdir}/usr/bin/odbx-sql" "usr/bin/" dh_install -popendbx-utils --autodest "${tmpdir}/usr/share/locale/*/*/opendbx-utils.mo" dh_install -popendbx-utils "${tmpdir}/usr/share/opendbx/keywords" "usr/share/opendbx/" dh_link dh_strip dh_compress dh_fixperms dh_makeshlibs --exclude=backend dh_installdeb dh_shlibdeps dh_md5sums dh_gencontrol -p${package} dh_builddeb -p${package} dh_gencontrol -p${package}-dev dh_builddeb -p${package}-dev @set -e ; \ for be in ${backends} ; do \ dh_gencontrol -p${package}-$${be} ; \ dh_builddeb -p${package}-$${be} ; \ done dh_gencontrol -popendbx-utils dh_builddeb -popendbx-utils binary-indep: binary: binary-arch binary-indep clean: rm -f build-stamp rm -f debian/files dh_testdir dh_testroot -$(MAKE) distclean autoreconf --force dh_clean .PHONY: binary binary-arch binary-indep build clean install opendbx-1.4.6/debian/docs0000644000175000017500000000001411425153451012173 00000000000000README TODO opendbx-1.4.6/debian/changelog0000644000175000017500000001753211765211220013203 00000000000000libopendbx (1.4.6-1) unstable; urgency=low * New upstream version (stable version) * Fixed build requirements for Ubuntu -- Norbert Sendetzky Sat, 05 May 2012 00:00:00 +0100 libopendbx (1.4.5-1) unstable; urgency=medium * New upstream version (stable version) * Fixed build requirements * Changed debhelper compatibility level to 7 -- Norbert Sendetzky Fri, 25 Dec 2009 00:00:00 +0100 libopendbx (1.4.4-1) unstable; urgency=medium * New upstream version (stable version) -- Norbert Sendetzky Fri, 07 Aug 2009 00:00:00 +0100 libopendbx (1.4.3-1) unstable; urgency=medium * New upstream version (stable version) -- Norbert Sendetzky Fri, 07 Aug 2009 00:00:00 +0100 libopendbx (1.4.2-1) unstable; urgency=medium * New upstream version (stable version) -- Norbert Sendetzky Fri, 07 Aug 2009 00:00:00 +0100 libopendbx (1.4.1-1) unstable; urgency=medium * New upstream version (stable version) -- Norbert Sendetzky Tue, 02 Jun 2009 00:00:00 +0100 libopendbx (1.4.0-1) unstable; urgency=medium * New upstream version (stable version) -- Norbert Sendetzky Mon, 02 Mar 2009 00:00:00 +0100 libopendbx (1.3.11-1) unstable; urgency=low * New upstream version (development version) * removed --enable-utils as building the utils is now enabled by default -- Norbert Sendetzky Sat, 15 Jun 2008 00:00:00 +0100 libopendbx (1.3.10-1) unstable; urgency=low * New upstream version (development version) * Added odbx-sql man page to opendbx-utils package * Moved odbx_*.3 man pages to libopendbx-dev package -- Norbert Sendetzky Fri, 30 May 2008 00:00:00 +0100 libopendbx (1.3.9-1) unstable; urgency=low * New upstream version (development version) * Added keywords file for odbx-sql -- Norbert Sendetzky Wed, 21 May 2008 00:00:00 +0100 libopendbx (1.3.8-1) unstable; urgency=low * New upstream version (development version) -- Norbert Sendetzky Thu, 17 Apr 2008 00:00:00 +0100 libopendbx (1.3.7-1) unstable; urgency=low * New upstream version (development version) * Added dependencies for odbx-sql * Added translation for odbx-sql -- Norbert Sendetzky Thu, 20 Mar 2008 00:00:00 +0100 libopendbx (1.3.6-1) unstable; urgency=low * New upstream version (development version) * Added opendbx-utils package -- Norbert Sendetzky Sat, 09 Feb 2008 00:00:00 +0100 libopendbx (1.3.5-1) unstable; urgency=low * New upstream version (development version) * Adapted Build-Depends to work with all MySQL and Firebird development packages * Replaced ${Source-Version} by ${binary:Version} * Update to Debian policy 3.7.3.0 -- Norbert Sendetzky Sat, 02 Feb 2008 00:00:00 +0100 libopendbx (1.3.4-1) unstable; urgency=low * New upstream version (development version) -- Norbert Sendetzky Thu, 08 Jul 2007 00:00:00 +0100 libopendbx (1.3.3-1) unstable; urgency=low * New upstream version (development version) * Added libopendbxplus to package * Added appropriate C++ flags to rules file * Added C++ header file to package * New locations for include files -- Norbert Sendetzky Thu, 08 May 2007 00:00:00 +0100 libopendbx (1.3.2-1) unstable; urgency=low * New upstream version (development version) -- Norbert Sendetzky Thu, 07 May 2007 00:00:00 +0100 libopendbx (1.3.1-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sat, 17 Mar 2007 00:00:00 +0100 libopendbx (1.3.0-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sat, 17 Feb 2007 00:00:00 +0100 libopendbx (1.2.0-1) unstable; urgency=medium * New upstream version (stable version) -- Norbert Sendetzky Thu, 28 Dec 2006 00:00:00 +0200 libopendbx (1.1.9-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sun, 10 Dec 2006 00:00:00 +0200 libopendbx (1.1.8-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sat, 21 Oct 2006 00:00:00 +0200 libopendbx (1.1.7-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Wed, 04 Oct 2006 00:00:00 +0200 libopendbx (1.1.6-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sun, 10 Sep 2006 00:00:00 +0200 libopendbx (1.1.5-1) unstable; urgency=medium * New upstream version (development version) * Renamed freetds to mssql * Preserve configure flags -- Norbert Sendetzky Sun, 27 Aug 2006 00:00:00 +0200 libopendbx (1.1.4-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sat, 12 Aug 2006 00:00:00 +0200 libopendbx (1.1.3-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Thu, 08 Jul 2006 00:00:00 +0200 libopendbx (1.1.2-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Thu, 04 Jul 2006 00:00:00 +0200 libopendbx (1.1.1-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Sat, 10 Jun 2006 00:00:00 +0200 libopendbx (1.1.0-1) unstable; urgency=medium * New upstream version (development version) -- Norbert Sendetzky Thu, 28 Mar 2006 00:00:00 +0200 libopendbx (0.9.8-1) unstable; urgency=medium * New upstream version -- Norbert Sendetzky Sat, 25 Mar 2006 00:00:00 +0200 libopendbx (0.9.7-1) unstable; urgency=medium * New upstream version * Added gettext files -- Norbert Sendetzky Sun, 26 Feb 2006 00:00:00 +0200 libopendbx (0.9.6-1) unstable; urgency=medium * New upstream version -- Norbert Sendetzky Mon, 17 Oct 2005 00:00:00 +0200 libopendbx (0.9.5-1) unstable; urgency=medium * New upstream version -- Norbert Sendetzky Sat, 1 Oct 2005 00:00:00 +0200 libopendbx (0.9.4-1) unstable; urgency=medium * New upstream version -- Norbert Sendetzky Mon, 10 Sep 2005 00:00:00 +0200 libopendbx (0.9.3-1) unstable; urgency=medium * New upstream version * Repackaged opendbx to libopendbx * Fixed package dependencies * Rewritten debian/rules file * Added missing files to comply with debian policy * Packages are now lintian and linda clean -- Norbert Sendetzky Mon, 8 Aug 2005 00:00:00 +0200 opendbx (0.9.2-1) unstable; urgency=medium * Added SQLite3 backend -- Norbert Sendetzky Mon, 18 Jul 2005 00:00:00 +0100 opendbx (0.9.1-1) unstable; urgency=medium * New upstream version -- Norbert Sendetzky Mon, 03 Aug 2004 00:00:00 +0100 opendbx (0.9.0-1) unstable; urgency=medium * New upstream version -- Norbert Sendetzky Mon, 03 Aug 2004 00:00:00 +0100 opendbx (0.9-1) unstable; urgency=low * Added SQLite backend -- Norbert Sendetzky Thu, 10 Apr 2004 00:00:00 +0100 opendbx (0.8-1) unstable; urgency=low * Initial packaging -- Norbert Sendetzky Thu, 30 Mar 2004 00:00:00 +0100 opendbx-1.4.6/debian/copyright0000644000175000017500000000210111425153452013253 00000000000000This package was debianized by Norbert Sendetzky on Sat, 6 Aug 2005 12:55:17 +0200. It was downloaded from http://www.linuxnetworks.de/doc/index.php/OpenDBX/Download Copyright Holder: Norbert Sendetzky License: libopendbx: A lightweight C library for accessing databases with a single API Copyright 2004-2008 Norbert Sendetzky This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. opendbx-1.4.6/debian/compat0000644000175000017500000000000211425153452012524 000000000000007 opendbx-1.4.6/config.rpath0000755000175000017500000004364711425153451012431 00000000000000#! /bin/sh # Output a system dependent set of variables, describing how to set the # run time search path of shared libraries in an executable. # # Copyright 1996-2007 Free Software Foundation, Inc. # Taken from GNU libtool, 2001 # Originally by Gordon Matzigkeit , 1996 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. # # The first argument passed to this file is the canonical host specification, # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld # should be set by the caller. # # The set of defined variables is at the end of this script. # Known limitations: # - On IRIX 6.5 with CC="cc", the run time search patch must not be longer # than 256 bytes, otherwise the compiler driver will dump core. The only # known workaround is to choose shorter directory names for the build # directory and/or the installation directory. # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a shrext=.so host="$1" host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` # Code taken from libtool.m4's _LT_CC_BASENAME. for cc_temp in $CC""; do case $cc_temp in compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` # Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. wl= if test "$GCC" = yes; then wl='-Wl,' else case "$host_os" in aix*) wl='-Wl,' ;; darwin*) case $cc_basename in xlc*) wl='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) ;; hpux9* | hpux10* | hpux11*) wl='-Wl,' ;; irix5* | irix6* | nonstopux*) wl='-Wl,' ;; newsos6) ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) wl='-Wl,' ;; pgcc | pgf77 | pgf90) wl='-Wl,' ;; ccc*) wl='-Wl,' ;; como) wl='-lopt=' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) wl='-Wl,' ;; esac ;; esac ;; osf3* | osf4* | osf5*) wl='-Wl,' ;; rdos*) ;; solaris*) wl='-Wl,' ;; sunos4*) wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3*) wl='-Wl,' ;; sysv4*MP*) ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) wl='-Wl,' ;; unicos*) wl='-Wl,' ;; uts4*) ;; esac fi # Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS. hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no case "$host_os" in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. # Unlike libtool, we use -rpath here, not --rpath, since the documented # option of GNU ld is called -rpath, not --rpath. hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' case "$host_os" in aix3* | aix4* | aix5*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we cannot use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then : else ld_shlibs=no fi ;; interix[3-9]*) hardcode_direct=no hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; netbsd*) ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ld_shlibs=no elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ld_shlibs=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' else ld_shlibs=no fi ;; esac ;; sunos4*) hardcode_direct=yes ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then : else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = no; then hardcode_libdir_flag_spec= fi else case "$host_os" in aix3*) # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac fi hardcode_direct=yes hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 hardcode_direct=unsupported hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi ;; esac fi # Begin _LT_AC_SYS_LIBPATH_AIX. echo 'int main () { return 0; }' > conftest.c ${CC} ${LDFLAGS} conftest.c -o conftest aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } }'` fi if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib" fi rm -f conftest.c conftest # End _LT_AC_SYS_LIBPATH_AIX. if test "$aix_use_runtimelinking" = yes; then hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' else hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" fi fi ;; amigaos*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; bsdi[45]*) ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' libext=lib ;; darwin* | rhapsody*) hardcode_direct=no if test "$GCC" = yes ; then : else case $cc_basename in xlc*) ;; *) ld_shlibs=no ;; esac fi ;; dgux*) hardcode_libdir_flag_spec='-L$libdir' ;; freebsd1*) ld_shlibs=no ;; freebsd2.2*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; freebsd2*) hardcode_direct=yes hardcode_minus_L=yes ;; freebsd* | dragonfly*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; hpux9*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; hpux10*) if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes fi ;; hpux11*) if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: case $host_cpu in hppa*64*|ia64*) hardcode_direct=no ;; *) hardcode_direct=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; netbsd*) hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes ;; newsos6) hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then hardcode_libdir_flag_spec='${wl}-rpath,$libdir' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) hardcode_libdir_flag_spec='-R$libdir' ;; *) hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi else ld_shlibs=no fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes ;; osf3*) hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) if test "$GCC" = yes; then hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else # Both cc and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; solaris*) hardcode_libdir_flag_spec='-R$libdir' ;; sunos4*) hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes ;; sysv4) case $host_vendor in sni) hardcode_direct=yes # is this really true??? ;; siemens) hardcode_direct=no ;; motorola) hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; esac ;; sysv4.3*) ;; sysv4*MP*) if test -d /usr/nec; then ld_shlibs=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ;; sysv5* | sco3.2v5* | sco5v6*) hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' hardcode_libdir_separator=':' ;; uts4*) hardcode_libdir_flag_spec='-L$libdir' ;; *) ld_shlibs=no ;; esac fi # Check dynamic linker characteristics # Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. # Unlike libtool.m4, here we don't care about _all_ names of the library, but # only about the one the linker finds when passed -lNAME. This is the last # element of library_names_spec in libtool.m4, or possibly two of them if the # linker has special search rules. library_names_spec= # the last element of library_names_spec in libtool.m4 libname_spec='lib$name' case "$host_os" in aix3*) library_names_spec='$libname.a' ;; aix4* | aix5*) library_names_spec='$libname$shrext' ;; amigaos*) library_names_spec='$libname.a' ;; beos*) library_names_spec='$libname$shrext' ;; bsdi[45]*) library_names_spec='$libname$shrext' ;; cygwin* | mingw* | pw32*) shrext=.dll library_names_spec='$libname.dll.a $libname.lib' ;; darwin* | rhapsody*) shrext=.dylib library_names_spec='$libname$shrext' ;; dgux*) library_names_spec='$libname$shrext' ;; freebsd1*) ;; freebsd* | dragonfly*) case "$host_os" in freebsd[123]*) library_names_spec='$libname$shrext$versuffix' ;; *) library_names_spec='$libname$shrext' ;; esac ;; gnu*) library_names_spec='$libname$shrext' ;; hpux9* | hpux10* | hpux11*) case $host_cpu in ia64*) shrext=.so ;; hppa*64*) shrext=.sl ;; *) shrext=.sl ;; esac library_names_spec='$libname$shrext' ;; interix[3-9]*) library_names_spec='$libname$shrext' ;; irix5* | irix6* | nonstopux*) library_names_spec='$libname$shrext' case "$host_os" in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; *) libsuff= shlibsuff= ;; esac ;; esac ;; linux*oldld* | linux*aout* | linux*coff*) ;; linux* | k*bsd*-gnu) library_names_spec='$libname$shrext' ;; knetbsd*-gnu) library_names_spec='$libname$shrext' ;; netbsd*) library_names_spec='$libname$shrext' ;; newsos6) library_names_spec='$libname$shrext' ;; nto-qnx*) library_names_spec='$libname$shrext' ;; openbsd*) library_names_spec='$libname$shrext$versuffix' ;; os2*) libname_spec='$name' shrext=.dll library_names_spec='$libname.a' ;; osf3* | osf4* | osf5*) library_names_spec='$libname$shrext' ;; rdos*) ;; solaris*) library_names_spec='$libname$shrext' ;; sunos4*) library_names_spec='$libname$shrext$versuffix' ;; sysv4 | sysv4.3*) library_names_spec='$libname$shrext' ;; sysv4*MP*) library_names_spec='$libname$shrext' ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) library_names_spec='$libname$shrext' ;; uts4*) library_names_spec='$libname$shrext' ;; esac sed_quote_subst='s/\(["`$\\]\)/\\\1/g' escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` shlibext=`echo "$shrext" | sed -e 's,^\.,,'` escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand `-c -o'. Remove `-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file `INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; esac ofile= cfile= eat= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as `compile cc -o foo foo.c'. # So we strip `-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no `-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # `.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: opendbx-1.4.6/configure.ac0000644000175000017500000002706611765211130012400 00000000000000# -*- Autoconf -*- # Process this file with autoconf to produce a configure script. AC_PREREQ(2.61) AC_INIT([opendbx],[1.4.6],[http://bugs.linuxnetworks.de/]) AC_CONFIG_SRCDIR([config.h.in]) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADERS([config.h]) AM_INIT_AUTOMAKE AM_MAINTAINER_MODE AM_GNU_GETTEXT([external]) AM_GNU_GETTEXT_VERSION([0.17]) AM_ICONV # Library setup APIVERSION="3:0:2" AC_SUBST([APIVERSION]) APINUMBER="10200" AC_SUBST([APINUMBER]) APIPLUSVERSION="1:0:0" AC_SUBST([APIPLUSVERSION]) LIBVERSION=`echo $VERSION. | sed -e 's/[[^0-9.]]//g; s/\./ /g; s/ \([[0-9]]\) / 0\\1 /g; s/ //g'` AC_SUBST([LIBVERSION]) # Environment specific settings AC_SUBST([LIBPREFIX]) AC_SUBST([LIBSUFFIX]) LIBPREFIX="lib" LIBSUFFIX=".so" case "$host" in *-*-cygwin*) LIBPREFIX="cyg" LIBSUFFIX="-1.dll" ;; *-*-mingw* | *-*-pw32*) LIBSUFFIX="-1.dll" AC_DEFINE([WIN32], 1, [Using Win32 API functions]) ;; esac # Libtool settings LT_INIT([win32-dll]) # Checks for programs. AC_PROG_CC AC_PROG_CC_STDC AC_PROG_CPP AC_PROG_CXX AC_PROG_LN_S AC_PROG_INSTALL AC_PROG_MAKE_SET # Checks for typedefs, structures, and compiler characteristics. AC_C_CONST AC_TYPE_SIZE_T AC_TYPE_SSIZE_T AC_TYPE_INT64_T AC_TYPE_UINT64_T AC_STRUCT_TM # Checks for header files. AC_HEADER_STDC AC_HEADER_TIME AC_CHECK_HEADERS([dlfcn.h getopt.h inttypes.h libintl.h stdlib.h string.h sys/time.h unistd.h windows.h windef.h winsock2.h]) # Checks for library functions. AC_FUNC_ERROR_AT_LINE AC_FUNC_MALLOC AC_FUNC_REALLOC AC_FUNC_STRTOD AC_FUNC_STRFTIME AC_CHECK_FUNCS([getopt memmove memset select setenv snprintf strdup strncasecmp strstr strtol strtoul strtoull]) # Checks for additional libraries AC_SUBST([MAINLIBS]) ORIGLIBS=${LIBS}; LIBS="" AC_SEARCH_LIBS([dlopen], [dl], [AC_DEFINE([HAVE_LIBDL], 1, [Have -ldl])]) MAINLIBS=${LIBS}; LIBS=${ORIGLIBS} # Checks for additional programs AC_CHECK_PROG([db2man], [db2x_manxml], [yes], [no]) AC_CHECK_PROG([doxygen], [doxygen], [yes], [no]) if test "x${db2man}" != xyes; then AC_MSG_RESULT([Warning: docbook man page converter not found - skip generating man pages]); fi if test "x${doxygen}" != xyes; then AC_MSG_RESULT([Warning: doxygen not found - skip generating man pages]); fi AM_CONDITIONAL([ENABLEMAN], [test "x${db2man}" = xyes -a "x${doxygen}" = xyes]) # Build options AC_ARG_ENABLE([singlelib], [AS_HELP_STRING([--enable-singlelib], [build single library including backends])], [singlelib="${enableval}"], [singlelib=no]) AM_CONDITIONAL([SINGLELIB], [test "x${singlelib}" = xyes]) AC_ARG_ENABLE([test], [AS_HELP_STRING([--disable-test], [don't build OpenDBX test applications])], [test="${enableval}"], [test=yes]) AM_CONDITIONAL([ENABLETEST], [test "x${test}" = xyes]) AC_ARG_ENABLE([utils], [AS_HELP_STRING([--disable-utils], [don't build OpenDBX utility applications])], [utils="${enableval}"], [utils=yes]) AM_CONDITIONAL([ENABLEUTILS], [test "x${utils}" = xyes]) if test "x${utils}" = xyes; then AC_CHECK_HEADERS([readline/readline.h], , [AC_MSG_ERROR([libreadline header (readline.h) not found])]) AC_CHECK_HEADERS([readline/history.h], , [AC_MSG_ERROR([libreadline header (history.h) not found])]) AC_CHECK_LIB([ncurses], [initscr], [AC_DEFINE([HAVE_LIBNCURSES], 1, [Have -lncurses])], [AC_MSG_ERROR([ncurses library (libncurses) not found])]) AC_CHECK_LIB([readline -lncurses], [readline], [AC_DEFINE([HAVE_LIBREADLINE], 1, [Have -lreadline])], [AC_MSG_ERROR([readline library (libreadline) not found])]) fi # Conditional builds AC_SUBST([backends]) AC_SUBST([backendlibs]) AC_ARG_WITH([backends], [AS_HELP_STRING([--with-backends=...], [compile listed backends])], [backends="${withval}"]) # Conditional checks and libs for backend in $backends do backendlibs="${backendlibs} ../backends/${backend}/lib${backend}backend.la" case $backend in firebird) AC_CHECK_HEADERS([ibase.h], , [AC_MSG_ERROR([firebird header (ibase.h) not found])]) AC_SUBST([LIBFIREBIRD]) AC_CHECK_LIB( [fbclient], [isc_attach_database], [AC_DEFINE([HAVE_LIBFBCLIENT], 1, [Have -lfbclient]) LIBFIREBIRD="fbclient"], AC_CHECK_LIB( [gds32], [isc_attach_database], [AC_DEFINE([HAVE_LIBGDS32], 1, [Have -lgds32]) LIBFIREBIRD="gds32"], [odbx_saved_libs=${LIBS}; LIBS="-lfbclient_ms" AC_LINK_IFELSE( [ #include #include int main() { isc_attach_database( NULL, 0, "", NULL, 0, NULL ); return 0; } ], [ AC_MSG_RESULT([checking for isc_attach_database in -lfbclient_ms... yes]) AC_DEFINE([HAVE_LIBFBCLIENT], 1, [Have -lfbclient_ms]) LIBFIREBIRD="fbclient_ms" ], [ AC_MSG_RESULT([checking for isc_attach_database in -lfbclient_ms... no]) AC_MSG_ERROR([firebird/interbase library (libfbclient, libfbclient_ms or gds32) not found]) ] ) LIBS=${odbx_saved_libs} ] ) ) ;; mssql) AC_CHECK_HEADERS([sybfront.h], , [AC_MSG_ERROR([mssql header (sybfront.h) not found])]) AC_SUBST([LIBMSSQL]) AC_CHECK_LIB( [sybdb], [dbresults], [AC_DEFINE([HAVE_LIBSYBDB], 1, [Have -lsybdb]) LIBMSSQL="sybdb"], [AC_MSG_ERROR([mssql library (libsybdb) not found])] ) AC_CHECK_MEMBER([struct dbdaterec.year], [AC_DEFINE([HAVE_LIBSYBDB_MSLIB], 1, [Have mslib type of "struct dbdaterec"])], [], [[#include ]]) odbx_saved_libs=${LIBS}; LIBS="" AC_SEARCH_LIBS([dgettext], [intl], [LIBMSSQL="$LIBMSSQL $LIBS"]) LIBS=${odbx_saved_libs} ;; mysql) AC_CHECK_HEADERS([mysql.h], , [AC_MSG_ERROR([mysql header (mysql.h) not found])], [ #ifdef HAVE_WINDOWS_H #include #endif ]) AC_SUBST([LIBMYSQL]) AC_CHECK_LIB( [mysqlclient_r], [mysql_init], [AC_DEFINE([HAVE_LIBMYSQLCLIENT_R], 1, [Have -lmysqlclient_r]) LIBMYSQL="mysqlclient_r"], [AC_CHECK_LIB( [mysqlclient], [mysql_init], [AC_DEFINE([HAVE_LIBMYSQLCLIENT], 1, [Have -lmysqlclient]) LIBMYSQL="mysqlclient"], [odbx_saved_libs=${LIBS}; LIBS="-lmysql" AC_LINK_IFELSE( [ #include #include int main() { mysql_init( NULL ); return 0; } ], [ AC_MSG_RESULT([checking for mysql_init in -lmysql... yes]) AC_DEFINE([HAVE_LIBMYSQL], 1, [Have -lmysql]) LIBMYSQL="mysql" ], [ AC_MSG_RESULT([checking for mysql_init in -lmysql... no]) AC_MSG_ERROR([mysql client library (libmysqlclient_r, libmysqlclient or libmysql) not found]) ] ) LIBS=${odbx_saved_libs} ] )] ) odbx_saved_libs=${LIBS}; LIBS="-l$LIBMYSQL" AC_LINK_IFELSE( [ #ifdef HAVE_WINDOWS_H #include #endif #include #include int main() { mysql_next_result( NULL ); return 0; } ], [ AC_MSG_RESULT([checking for mysql_next_result in -l$LIBMYSQL... yes]) AC_DEFINE([HAVE_MYSQL_NEXT_RESULT], 1, [Have mysql_next_result]) ], [ AC_MSG_RESULT([checking for mysql_next_result in -l$LIBMYSQL... no]) ] ) LIBS=${odbx_saved_libs} AC_CHECK_LIB([z], [compress], [LIBMYSQL="${LIBMYSQL} -lz"]) ;; odbc) AC_CHECK_HEADERS([sql.h], , [AC_MSG_ERROR([odbc header (sql.h) not found])], [ #ifdef HAVE_WINDEF_H #include #endif ]) AC_SUBST([LIBODBC]) AC_CHECK_LIB( [odbc], [SQLConnect], [AC_DEFINE([HAVE_LIBODBC], 1, [Have -lodbc]) LIBODBC="odbc"], [AC_CHECK_LIB( [iodbc], [SQLConnect], [AC_DEFINE([HAVE_LIBODBC], 1, [Have -liodbc]) LIBODBC="iodbc"], [odbx_saved_libs=${LIBS}; LIBS="-lodbc32" AC_LINK_IFELSE( [ #include #include #include int main() { SQLConnect( NULL, NULL, 0, NULL, 0, NULL, 0 ); return 0; } ], [ AC_MSG_RESULT([checking for SQLConnect in -lodbc32... yes]) AC_DEFINE([HAVE_LIBODBC], 1, [Have -lodbc32]) LIBODBC="odbc32" ], [ AC_MSG_RESULT([checking for SQLConnect in -lodbc32... no]) AC_MSG_ERROR([odbc library (libodbc, libiodbc or libodbc32) not found]) ] ) LIBS=${odbx_saved_libs} ] )] ) ;; oracle) AC_CHECK_HEADERS([oci.h], , [AC_MSG_ERROR([oracle header (oci.h) not found])]) AC_SUBST([LIBORACLE]) AC_CHECK_LIB( [clntsh], [OCIInitialize], [AC_DEFINE([HAVE_LIBCLNTSH], 1, [Have -lclntsh]) LIBORACLE="clntsh"], [AC_CHECK_LIB( [oci], [OCIInitialize], AC_DEFINE([HAVE_LIBOCI], 1, [Have liboci]) LIBORACLE="oci", [AC_MSG_ERROR([oracle library (clntsh or oci) not found])] )] ) AC_CHECK_LIB( [$LIBORACLE], [OCILobWrite2], [AC_DEFINE([HAVE_OCILOBWRITE2], 1, [Define to 1 if you have OCILobWrite2])] ) AC_CHECK_LIB( [kernel32], [main], [AC_DEFINE([HAVE_SETENVIRONMENTVARIABLE], 1, [Define to 1 if you have SetEnvironmentVariable]) LIBORACLE="$LIBORACLE -lkernel32"] ) ;; pgsql) AC_CHECK_HEADERS([libpq-fe.h], , [AC_MSG_ERROR([postgresql header (libpq-fe.h) not found])]) AC_CHECK_HEADERS([limits.h], , [AC_MSG_ERROR([system limits not found])]) AC_SUBST([LIBPGSQL]) AC_CHECK_LIB( [pq], [PQconnectdb], [AC_DEFINE([HAVE_LIBPQ], 1, [Have -lpq]) LIBPGSQL="pq"], [AC_MSG_ERROR([postgresql library (libpq) not found])] ) AC_CHECK_LIB( [$LIBPGSQL], [PQescapeStringConn], [AC_DEFINE([HAVE_PQ_ESCAPE_STRING_CONN], 1, [Define to 1 if you have PQescapeStringConn])] ) AC_CHECK_LIB( [ws2_32], [main], [AC_DEFINE([HAVE_SELECT], 1, [Define to 1 if you have ws2_32.dll]) LIBPGSQL="$LIBPGSQL -lws2_32"] ) ;; sqlite) AC_CHECK_HEADERS([sqlite.h], , [AC_MSG_ERROR([sqlite header (sqlite.h) not found])]) AC_SUBST([LIBSQLITE]) AC_CHECK_LIB( [sqlite], [sqlite_get_table], [AC_DEFINE([HAVE_LIBSQLITE], 1, [Have -lsqlite]) LIBSQLITE="sqlite"], [AC_MSG_ERROR([sqlite library (libsqlite) not found])] ) ;; sqlite3) AC_CHECK_HEADERS([sqlite3.h], , [AC_MSG_ERROR([sqlite3 header (sqlite3.h) not found])]) AC_SUBST([LIBSQLITE3]) AC_CHECK_LIB( [sqlite3], [sqlite3_step], [AC_DEFINE([HAVE_LIBSQLITE3], 1, [Have -lsqlite3]) LIBSQLITE3="sqlite3"], [AC_MSG_ERROR([sqlite3 library (libsqlite3) not found])] ) AC_CHECK_LIB( [$LIBSQLITE3], [sqlite3_prepare_v2], [AC_DEFINE([HAVE_SQLITE3_PREPARE_V2], 1, [Define to 1 if you have sqlite3_prepare_v2])] ) AC_CHECK_LIB( [$LIBSQLITE3], [sqlite3_table_column_metadata], [AC_DEFINE([HAVE_SQLITE3_TABLE_COLUMN_METADATA], 1, [Define to 1 if you have sqlite3_table_column_metadata])] ) odbx_saved_libs=${LIBS}; LIBS="" AC_SEARCH_LIBS([dgettext], [intl], [LIBSQLITE3="$LIBSQLITE3 $LIBS"]) LIBS=${odbx_saved_libs} ;; sybase) AC_CHECK_HEADERS([ctpublic.h], , [AC_MSG_ERROR([sybase header (ctpublic.h) not found])]) AC_SUBST([LIBSYBASE]) AC_CHECK_LIB( [ct], [ct_init], [AC_DEFINE([HAVE_LIBCT], 1, [Have -lct]) LIBSYBASE="ct"], AC_CHECK_LIB( [sybct_r], [ct_init], [AC_DEFINE([HAVE_LIBSYBCT_R], 1, [Have -lsybct_r]) LIBSYBASE="sybct_r"], AC_CHECK_LIB( [sybct], [ct_init], [AC_DEFINE([HAVE_LIBSYBCT], 1, [Have -lsybct]) LIBSYBASE="sybct"], [AC_MSG_ERROR([sybase library (libct, libsybct_r or libsyb) not found])] ) ) ) AC_CHECK_LIB( [sybcs], [cs_config], [AC_DEFINE([HAVE_LIBSYBCS], 1, [Have -lsybcs]) LIBSYBASE="${LIBSYBASE} -lsybcs"] ) ;; esac done # Generate Makefiles AC_CONFIG_FILES([ Makefile backends/Makefile backends/firebird/Makefile backends/mssql/Makefile backends/mysql/Makefile backends/odbc/Makefile backends/oracle/Makefile backends/pgsql/Makefile backends/sqlite/Makefile backends/sqlite3/Makefile backends/sybase/Makefile doc/Makefile doc/Doxyfile lib/Makefile po/Makefile.in test/Makefile utils/Makefile utils/doc/Makefile utils/po/Makefile.in opendbx.spec opendbx.pc opendbxplus.pc ]) AC_OUTPUT