pax_global_header 0000666 0000000 0000000 00000000064 13026742577 0014527 g ustar 00root root 0000000 0000000 52 comment=16b93b6f2b7b42c51c61013c6831c91e6158487f
likwid-4.2.0/ 0000775 0000000 0000000 00000000000 13026742577 0013015 5 ustar 00root root 0000000 0000000 likwid-4.2.0/.travis.yml 0000664 0000000 0000000 00000000565 13026742577 0015134 0 ustar 00root root 0000000 0000000 language: c
compiler: gcc
install: true
dist: trusty
sudo: required
script:
- make && sudo make install
- /usr/local/bin/likwid-topology -c -C -g
- /usr/local/bin/likwid-pin -p
- sudo modprobe msr
- ls -la /dev/cpu/*
- ls -la /usr/local/sbin/*
- make -C test streamGCC
- /usr/local/bin/likwid-perfctr -i
- /usr/local/bin/likwid-bench -t copy -w N:100MB:2
likwid-4.2.0/CHANGELOG 0000664 0000000 0000000 00000011014 13026742577 0014224 0 ustar 00root root 0000000 0000000 # Changelog 4.2.0
- Support for Intel Xeon Phi (Knights Landing): Core, Uncore, RAPL
- Support for Uncore counters of some desktop chips (SandyBridge, IvyBridge,
Haswell, Broadwell and Skylake)
- Basic support for Linux perf_event interface instead of native access.
Currently only core-local counters working, Uncore is experimental
- Support to build against a existing Lua installation (5.1 - 5.3 tested)
- Support for CPU frequency manipulation, Lua interface updated
- Access module checks for LLNL's msr_safe kernel module
- Support for counter registers that are only available when
HyperThreading is off
- Fix for non-HyperThreading counters (PMC4-7) on Intel Broadwell
- Socket measurements can be used for all cores on the socket in
metric formulas.
- likwid-perfctr: Timeline mode without executable runs until user presses Ctrl+c
- likwid-perfctr: New CYCLE_ACTIVITY groups
- likwid-perfctr: New PORT_USAGE groups (only with deactivated HyperThreading)
- likwid-perfctr: Regions are sorted in output as they are executed by the code
- likwid-powermeter: Read Uncore frequency settings and performance energy bias
- likwid-powermeter: Update of energy unit for DRAM domain for Intel
Broadwell D/EP and Intel Xeon Phi (Knights Landing)
- likwid-bench: Fix for 'cycles per update' metric
- likwid-bench: Vector lengths are sanitized for thread count and loop stride
- likwid-topology: Increase robustness
- likwid-mpirun: Some fixes
# Changelog 4.1.2
- Fix for likwid-powermeter: Use proper energy unit
- Fix for performance groups for Intel Broadwell (D/EP): DATA and FALSE_SHARE
- Reduce number of started access daemons
- Clean Uncore unit local control registers (needed for simultaneous use of LIKWID 3 and 4)
- Clean config, filter and counter registers at *_finalize function
- Fix for likwid-features and likwid-perfctr
# Changelog 4.1.1
- Fix for Uncore handling for EP/EN/EX systems
- Minor fix for Uncore handling for Intel desktop systems
- Fix in generic readCounters function
- Support for Intel Goldmont (untested)
- Fixes for likwid-mpirun
# Changelog 4.1.0
- Support for Intel Skylake (Core + Uncore)
- Support for Intel Broadwell (Core + Uncore)
- Support for Intel Broadwell D (Core + Uncore)
- Support for Intel Broadwell EP/EN/EX (Core + Uncore)
- Support for Intel Airmont (Core)
- Uncore support for Intel SandyBridge, IvyBridge and Haswell
- Performance group and event set handling in library
- Internal calculator for derived metrics
- Improvement of Marker API
- Get results/metrics of last measurement cycle
- Fixed most memory leaks
- Respect 'Intel PMU sharing guide'
- Update of internal Lua to 5.3
- More examples (C++11 threads,Cilk+, TBB)
- Test suite for executables and library
- Accuracy checker supports multiple CPUs
- Security checked access daemon
- Likwid-bench supports Integer benchmarks
- Likwid-bench selects interation count automatically
- Likwid-bench has new FMA related benchmarks
- Likwid-mpirun supports SLURM job scheduler
- New tool likwid-features
# Changelog 4.0.1
- likwid-bench: Iteration determination is done serially
- likwid-bench: Manual selection of iterations possible
- likwid-perfctr: Set cpuset to all CPUs not only the first
- likwid-pin: Set cpuset to all CPUs not only the first
- likwid-accuracy.py: Enhanced plotting functions, use only instrumented likwid-bench
- likwid-accessD: Check for allowed register for PCI accesses
- Add models HASWELL_M1 (0x45) and HASWELL_M2 (0x46) to likwid-powermeter and likwid-accessD
- New test application using Cilk and Marker API
- New test application using C++11 threads and Marker API
- likwid-agent: gmetric version check for --group option and s/\s*/_/ in metric names
- likwid-powermeter: Print RAPL domain name
- Marker API: Initialize access already at likwid_markerInit()
- Marker API: likwid_markerThreadInit() only pins if not already pinned
# Changelog 4.0.0
- Support for Intel Broadwell
- Uncore support for all Uncore-aware architectures
- Nehalem (EX)
- Westmere (EX)
- SandyBridge EP
- IvyBridge EP
- Haswell EP
- Measure multiple event sets in a round-robin fashion (no multiplexing!)
- Event options to filter the counter increments
- Whole LIKWID functionality is exposed as API for C/C++ and Lua
- New functions in the Marker API to switch event sets and get intermediate results
- Topology code relies on hwloc. CPUID is still included but only as fallback
- Most LIKWID applications are written in Lua (only exception likwid-bench)
- Monitoring daemon likwid-agent with multiple output backends
- More performance groups
likwid-4.2.0/COPYING 0000664 0000000 0000000 00000077331 13026742577 0014063 0 ustar 00root root 0000000 0000000 GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc.
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights. Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they
know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software. For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.
Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so. This is fundamentally incompatible with the aim of
protecting users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable. Therefore, we
have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
likwid-4.2.0/INSTALL 0000664 0000000 0000000 00000020020 13026742577 0014040 0 ustar 00root root 0000000 0000000 == Basic build ==
1. Edit config.mk. Follow the comments there.
Optionally you can change compiler settings in include_[GCC|CLANG|ICC|MIC].mk.
Please note that only the default compiler flags GCC are supported and tested.
For 32 bit builds the only supported compiler setting is GCCX86.
2. make (Builds hwloc, lua, Likwid libraries, access daemons and likwid-bench)
3. make install (this is required for likwid-pin and if you use the accessDaemon)
Only the default flags set are tested. As it is not possible to test all
compiler setting variants the Intel icc compiler and Clang is only build tested.
A basic function test is done for the icc binary. The only variant fully tested
is gcc with default compiler flags. It is therefore recommended to use gcc with
the default flags. If you want to use and build the Fortran interface you can mix
GCC with the Intel Fortran Compiler (default setup). You can change the Fortran
compiler in make/include_[GCC|CLANG|ICC|MIC].mk.
*NOTICE*
All generated files are located in the [GCC|ICC|CLANG|MIC|GCCX86] build directory.
This includes the dependency files, object files. The
generated source files and the pas and assembly files for likwid-bench are build
in bench/[GCC|ICC|CLANG|MIC|GCCX86].
If you debug your likwid-bench benchmarks you can look at all
intermediate build files and also the final assembly code.
== Build on Xeon Phi (Knights Corner) ==
For builds for the Xeon Phi (Knights Corner) coprocessor, the accessDaemon and
the frequency daemon are disabled. Moreover, the access mode is set to 'direct'.
This was made because it is important to run as few processes as possible on the
Xeon Phi and the accessDaemon would start one process per hardware thread.
In order to build Likwid for the Xeon Phi processor, you have to change the
RPATHS variable in make/include_MIC.mk to point to the folder with the Intel
libraries like libimf.so. This is crucial because when using an suid-root
executable, the LD_LIBRARY_PATH gets lost but Likwid still needs to know where
the Intel libraries reside.
After installation change the owner of likwid-lua to root and set the suid-root
bit for likwid-lua:
chown root /likwid-lua
chmod u+s /likwid-lua
Afterwards Likwid can be used as anywhere else.
== Known problems ==
On very old systems with old kernels (< 2.6.7) or old glibc versions likwid
is build with reduced funtionality. This includes missing support for NUMA
and pinning.
likwid-setFrequencies can only be used if the acpi_cpufreq module is loaded. It
is not possible to fix the frequency with the intel_pstate module.
== Additional Targets ==
make clean - clean the object directory
make distclean - clean also the executables/libraries
make uninstall - delete installed files
make docs - generate html documentation using doxygen
make local - set paths in Lua files to work from current directory
(for testing only! Uses already installed access daemons and
libraries. Often you have to set the LD_LIBRARY_PATH to the
contain the current folder)
== Dependencies ==
Most parts of the Likwid suite do not have external dependencies that need to be
installed before you can build Likwid. If external libraries are used, they are
shipped with Likwid.
Included dependencies:
- hwloc
- Lua
- Perl Template toolkit
Build dependencies:
- C compiler (commonly gcc, but clang and icc are also possible)
- make
- Perl
Runtime dependencies for likwid-perfscope:
- gnuplot
Runtime dependencies for likwid-agent (if enabled in configfile):
- gmetric (Output to Ganglia Monitoring System)
- rrdtool (Output to RRDs)
- logger (Output to syslog)
For the HTML documentation you further need doxygen.
== Build accessDaemon ==
Change path for the accessDaemon:
1. Edit config.mk and configure path in ACCESSDAEMON variable. You can overwrite
it later in likwid.cfg
2. Set the desired default ACCESSMODE. You can overwrite this on the command
line or likwid.cfg.
2. make will also build the accessDaemon
3. Install with (sudo) make install
With the standard make install target the daemon will also be installed in
to the path in $ACCESSDAEMON. It also sets the user to root and the suid bit.
== Setup of msr module ==
likwid-perfctr, likwid-powermeter, likwid-agent, require the Linux msr kernel
module. This module is part of most standard distro kernels. You have to be root
to do the initial setup.
1. Check if the msr module is loaded with 'lsmod | grep msr'.
There should be an output.
2. If the module is not loaded, load it with 'modprobe msr'. For automatic
loading at startup consult your distros documentation how to do so, commonly
by adding 'msr' to /etc/modules.
3. Adopt access rights on the msr device files for normal user. To allow
everybody access you can use 'chmod o+rw /dev/cpu/*/msr'.
This is only recommended on save single user desktop systems and might be not
enough to grant access to anybody because of POSIX capabilites or other
security features of your distro.
As a general access to the msr registers is not desired on security sensitive
systems, you can either implement a more sophisticated access rights settings
with e.g. setgid. A common solution used on many other device files, e.g. for
audio, is to introduce a group and make a chown on the msr device files to that
group or use dbus rules. Now if you execute likwid-perfctr with setgid on that
group the executing user can use the tool but cannot directly write or read the
msr device files.
A secure solution is to use the accessDaemon, which encapsulates the access to
the msr device files and performs an address check for allowed registers. For
more information how to setup look at the HTML documentation.
A demo for a root exploit involving the msr device files was published. As
a consequence the security settings for access to the msr device files are
tightened in recent kernels. The exploit used a specify register to alter the
entry point for the current process to a malware. The daemon grants access only
to hardware performance counter related registers.
Just setting the file access rights or using suid root on the access daemon is
not sufficient anymore for some distros. You have to register your binary at the
libcap now to get access. This is only necessary if above setup does not work.
You register the necessary capability by calling
sudo setcap cap_sys_rawio+ep EXECUTABLE
on the executables. Not all file systems support capabilities.
The only feasable way is to register the likwid-accessD and proxy all access
over it.
If you have still problems please let me know on the likwid mailing list:
http://groups.google.com/group/likwid-users
== Building LIKWID with perf_event kernel backend ==
When setting USE_PERF_EVENT in config.mk, the perf_event kernel interface is
used to programm the counters instead of the way through the msr kernel module
and PCI devices. The event and counter lists are the same.
The perf_event interface handles the counter allocation itself, thus the counters
provided to LIKWID might not be the ones perf_event uses internally.
The support is tested for the core-local fixed- and general-purpose counters. The
paranoid setting requires to be 1 or less.
It is also able to use it for Uncore counters but the support is experimental
and requires a paranoid setting of 0 or less.
Currently no counter options are supported.
paranoid setting: /proc/sys/kernel/perf_event_paranoid
== Linking applications with LIKWID lib ==
Commonly the LIKWID C library can be used as all other libraries by setting the
include (-I) and library path (-L) and add -llikwid to the command line.
==== Internal hwloc library ====
The included hwloc library shouldn't make a problem as all hwloc functions are
prefixed with 'likwid_'.
==== Internal Lua library and interpreter ====
The included Lua libray might cause problems because the functions are not
renamed and might interfere with the other Lua library functions.
Maybe it works if the versions of Lua are the same (5.3.2).
The Lua interpreter is renamed at installation to likwid-lua, so does not
overwrite other interpreters.
likwid-4.2.0/Makefile 0000664 0000000 0000000 00000067640 13026742577 0014472 0 ustar 00root root 0000000 0000000 # =======================================================================================
#
# Filename: Makefile
#
# Description: Central Makefile
#
# Version:
# Released:
#
# Author: Jan Treibig (jt), jan.treibig@gmail.com
# Project: likwid
#
# Copyright (C) 2016 Jan Treibig
#
# This program is free software: you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation, either version 3 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# this program. If not, see .
#
# =======================================================================================
SRC_DIR = ./src
DOC_DIR = ./doc
GROUP_DIR = ./groups
FILTER_DIR = ./filters
MAKE_DIR = ./make
Q ?= @
#DO NOT EDIT BELOW
# Dependency chains:
# *.[ch] -> *.o -> executables
# *.ptt -> *.pas -> *.s -> *.o -> executables
# *.txt -> *.h (generated)
include ./config.mk
include $(MAKE_DIR)/include_$(COMPILER).mk
include $(MAKE_DIR)/config_checks.mk
include $(MAKE_DIR)/config_defines.mk
INCLUDES += -I./src/includes -I$(LUA_INCLUDE_DIR) -I$(HWLOC_FOLDER)/include -I$(BUILD_DIR)
LIBS += -ldl
ifeq ($(LUA_INTERNAL),false)
LIBS += -l$(LUA_LIB_NAME)
endif
#CONFIGURE BUILD SYSTEM
BUILD_DIR = ./$(COMPILER)
Q ?= @
GENGROUPLOCK = .gengroup
VPATH = $(SRC_DIR)
OBJ = $(patsubst $(SRC_DIR)/%.c, $(BUILD_DIR)/%.o,$(wildcard $(SRC_DIR)/*.c))
OBJ += $(patsubst $(SRC_DIR)/%.cc, $(BUILD_DIR)/%.o,$(wildcard $(SRC_DIR)/*.cc))
OBJ += $(patsubst $(SRC_DIR)/%.S, $(BUILD_DIR)/%.o,$(wildcard $(SRC_DIR)/*.S))
ifeq ($(FILTER_HWLOC_OBJ),yes)
OBJ := $(filter-out $(BUILD_DIR)/topology_hwloc.o,$(OBJ))
OBJ := $(filter-out $(BUILD_DIR)/numa_hwloc.o,$(OBJ))
OBJ := $(filter-out $(BUILD_DIR)/pci_hwloc.o,$(OBJ))
endif
ifneq ($(FORTRAN_INTERFACE),true)
OBJ := $(filter-out $(BUILD_DIR)/likwid_f90_interface.o,$(OBJ))
endif
PERFMONHEADERS = $(patsubst $(SRC_DIR)/includes/%.txt, $(BUILD_DIR)/%.h,$(wildcard $(SRC_DIR)/includes/*.txt))
OBJ_LUA = $(wildcard ./ext/lua/$(COMPILER)/*.o)
OBJ_HWLOC = $(wildcard ./ext/hwloc/$(COMPILER)/*.o)
FILTERS := $(filter-out ./filters/README,$(wildcard ./filters/*))
L_APPS = likwid-perfctr \
likwid-pin \
likwid-powermeter \
likwid-topology \
likwid-memsweeper \
likwid-agent \
likwid-mpirun \
likwid-features \
likwid-perfscope \
likwid-genTopoCfg
C_APPS = bench/likwid-bench
L_HELPER = likwid.lua
ifeq ($(BUILDFREQ),true)
L_APPS += likwid-setFrequencies
endif
CPPFLAGS := $(CPPFLAGS) $(DEFINES) $(INCLUDES)
all: $(BUILD_DIR) $(PERFMONHEADERS) $(OBJ) $(TARGET_LIB) $(FORTRAN_IF) $(PINLIB) $(L_APPS) $(L_HELPER) $(DAEMON_TARGET) $(FREQ_TARGET) $(BENCH_TARGET)
tags:
@echo "===> GENERATE TAGS"
$(Q)ctags -R
docs:
@echo "===> GENERATE DOXYGEN DOCS"
@cp doc/lua-doxygen.md doc/lua-doxygen.md.safe
@cp doc/likwid-doxygen.md doc/likwid-doxygen.md.safe
@sed -i -e s+''+$(PREFIX)+g -e s+''+$(VERSION)+g -e s+''+'$(DATE)'+g -e s+''+$(RELEASE)+g doc/lua-doxygen.md
@sed -i -e s+''+$(PREFIX)+g -e s+''+$(VERSION)+g -e s+''+'$(DATE)'+g -e s+''+$(RELEASE)+g doc/likwid-doxygen.md
$(Q)doxygen doc/Doxyfile
@mv doc/lua-doxygen.md.safe doc/lua-doxygen.md
@mv doc/likwid-doxygen.md.safe doc/likwid-doxygen.md
$(L_APPS): $(addprefix $(SRC_DIR)/applications/,$(addsuffix .lua,$(L_APPS)))
@echo "===> ADJUSTING $@"
@if [ "$(ACCESSMODE)" = "direct" ]; then sed -i -e s/"access_mode = 1"/"access_mode = 0"/g $(SRC_DIR)/applications/$@.lua;fi
@sed -e s/''/$(subst /,\\/,$(INSTALLED_BINPREFIX))/g \
-e s/''/$(subst /,\\/,$(INSTALLED_PREFIX))/g \
-e s/''/$(VERSION).$(RELEASE)/g \
-e s/''/$(DATE)/g \
$(addprefix $(SRC_DIR)/applications/,$(addsuffix .lua,$@)) > $@
@if [ "$(LUA_INTERNAL)" = "false" ]; then \
sed -i -e s+"$(subst /,\\/,$(INSTALLED_BINPREFIX))/likwid-lua"+"$(LUA_BIN)/$(LUA_LIB_NAME)"+ $@; \
fi
@if [ "$(ACCESSMODE)" = "direct" ]; then sed -i -e s/"access_mode = 0"/"access_mode = 1"/g $(SRC_DIR)/applications/$@.lua;fi
$(L_HELPER):
@echo "===> ADJUSTING $@"
@sed -e s/''/$(subst /,\\/,$(PREFIX))/g \
-e s/''/$(subst /,\\/,$(INSTALLED_LIBPREFIX))/g \
-e s/''/$(subst /,\\/,$(INSTALLED_PREFIX))/g \
-e s/''/$(subst /,\\/,$(LIKWIDGROUPPATH))/g \
-e s/''/$(subst /,\\/,$(LIBLIKWIDPIN))/g \
-e s/''/$(VERSION)/g \
-e s/''/$(RELEASE)/g \
$(SRC_DIR)/applications/$@ > $@
$(STATIC_TARGET_LIB): $(BUILD_DIR) $(PERFMONHEADERS) $(OBJ) $(TARGET_HWLOC_LIB) $(TARGET_LUA_LIB)
@echo "===> CREATE STATIC LIB $(TARGET_LIB)"
$(Q)${AR} -crus $(STATIC_TARGET_LIB) $(OBJ) $(TARGET_HWLOC_LIB) $(TARGET_LUA_LIB)
$(DYNAMIC_TARGET_LIB): $(BUILD_DIR) $(PERFMONHEADERS) $(OBJ) $(TARGET_HWLOC_LIB) $(TARGET_LUA_LIB)
@echo "===> CREATE SHARED LIB $(TARGET_LIB)"
$(Q)${CC} $(DEBUG_FLAGS) $(SHARED_LFLAGS) -Wl,-soname,$(TARGET_LIB).$(VERSION).$(RELEASE) $(SHARED_CFLAGS) -o $(DYNAMIC_TARGET_LIB) $(OBJ) $(LIBS) $(TARGET_HWLOC_LIB) $(TARGET_LUA_LIB) $(RPATHS)
$(DAEMON_TARGET): $(SRC_DIR)/access-daemon/accessDaemon.c
@echo "===> BUILD access daemon likwid-accessD"
$(Q)$(MAKE) -C $(SRC_DIR)/access-daemon likwid-accessD
$(FREQ_TARGET): $(SRC_DIR)/access-daemon/setFreq.c
@echo "===> BUILD frequency daemon likwid-setFreq"
$(Q)$(MAKE) -C $(SRC_DIR)/access-daemon likwid-setFreq
$(BUILD_DIR):
@mkdir $(BUILD_DIR)
$(PINLIB):
@echo "===> CREATE LIB $(PINLIB)"
$(Q)$(MAKE) -C src/pthread-overload/ $(PINLIB)
$(GENGROUPLOCK): $(foreach directory,$(shell ls $(GROUP_DIR)), $(wildcard $(GROUP_DIR)/$(directory)/*.txt))
@echo "===> GENERATE GROUP HEADERS"
$(Q)$(GEN_GROUPS) ./groups $(BUILD_DIR) ./perl/templates
$(Q)touch $(GENGROUPLOCK)
$(FORTRAN_IF): $(SRC_DIR)/likwid.f90
@echo "===> COMPILE FORTRAN INTERFACE $@"
$(Q)$(FC) -c $(FCFLAGS) $<
@rm -f likwid.o
ifeq ($(LUA_INTERNAL),true)
$(TARGET_LUA_LIB):
@echo "===> ENTER $(LUA_FOLDER)"
$(Q)$(MAKE) --no-print-directory -C $(LUA_FOLDER) $(MAKECMDGOALS)
else
$(TARGET_LUA_LIB):
@echo "===> EXTERNAL LUA"
endif
$(TARGET_HWLOC_LIB):
@echo "===> ENTER $(HWLOC_FOLDER)"
$(Q)$(MAKE) --no-print-directory -C $(HWLOC_FOLDER) $(MAKECMDGOALS)
$(BENCH_TARGET):
@echo "===> ENTER $(BENCH_FOLDER)"
$(Q)$(MAKE) --no-print-directory -C $(BENCH_FOLDER) $(MAKECMDGOALS)
#PATTERN RULES
$(BUILD_DIR)/%.o: %.c
@echo "===> COMPILE $@"
$(Q)$(CC) -c $(DEBUG_FLAGS) $(CFLAGS) $(ANSI_CFLAGS) $(CPPFLAGS) $< -o $@
$(Q)$(CC) $(DEBUG_FLAGS) $(CPPFLAGS) -MT $(@:.d=.o) -MM $< > $(BUILD_DIR)/$*.d
$(BUILD_DIR)/%.o: %.cc
@echo "===> COMPILE $@"
$(Q)$(CXX) -c $(DEBUG_FLAGS) $(CXXFLAGS) $(CPPFLAGS) $< -o $@
$(Q)$(CXX) $(DEBUG_FLAGS) $(CXXFLAGS) $(CPPFLAGS) -MT $(@:.d=.o) -MM $< > $(BUILD_DIR)/$*.d
$(BUILD_DIR)/%.o: %.S
@echo "===> COMPILE $@"
$(Q)$(CPP) $(CPPFLAGS) $< -o $@.tmp
$(Q)$(AS) $(ASFLAGS) $@.tmp -o $@
@rm $@.tmp
$(BUILD_DIR)/%.h: $(SRC_DIR)/includes/%.txt
@echo "===> GENERATE HEADER $@"
$(Q)$(GEN_PMHEADER) $< $@
ifeq ($(findstring $(MAKECMDGOALS),clean),)
-include $(OBJ:.o=.d)
endif
.PHONY: clean distclean install uninstall help $(TARGET_LUA_LIB) $(TARGET_HWLOC_LIB) $(BENCH_TARGET)
.PRECIOUS: $(BUILD_DIR)/%.pas
.NOTPARALLEL:
clean: $(TARGET_LUA_LIB) $(TARGET_HWLOC_LIB) $(BENCH_TARGET)
@echo "===> CLEAN"
@for APP in $(L_APPS); do \
rm -f $$APP; \
done
@rm -f likwid.lua
@rm -f $(STATIC_TARGET_LIB)
@rm -f $(DYNAMIC_TARGET_LIB)
@rm -f $(PINLIB)
@rm -f $(FORTRAN_IF_NAME)
@rm -f $(FREQ_TARGET) $(DAEMON_TARGET)
distclean: $(TARGET_LUA_LIB) $(TARGET_HWLOC_LIB) $(BENCH_TARGET)
@echo "===> DIST CLEAN"
@for APP in $(L_APPS); do \
rm -f $$APP; \
done
@rm -f likwid.lua
@rm -f $(STATIC_TARGET_LIB)
@rm -f $(DYNAMIC_TARGET_LIB)
@rm -f $(PINLIB)
@rm -f $(FORTRAN_IF_NAME)
@rm -f $(FREQ_TARGET) $(DAEMON_TARGET)
@rm -rf $(BUILD_DIR)
@rm -f $(GENGROUPLOCK)
@rm -rf doc/html
@rm -f tags
ifeq ($(BUILDDAEMON),true)
ifneq ($(COMPILER),MIC)
install_daemon:
@echo "===> INSTALL access daemon to $(ACCESSDAEMON)"
@mkdir -p `dirname $(ACCESSDAEMON)`
@install -m 4775 $(INSTALL_CHOWN) $(DAEMON_TARGET) $(ACCESSDAEMON)
move_daemon:
@echo "===> MOVE access daemon from $(ACCESSDAEMON) to $(INSTALLED_ACCESSDAEMON)"
@mkdir -p `dirname $(INSTALLED_ACCESSDAEMON)`
@install -m 4775 $(INSTALL_CHOWN) $(ACCESSDAEMON) $(INSTALLED_ACCESSDAEMON)
uninstall_daemon:
@echo "===> REMOVING access daemon from $(ACCESSDAEMON)"
@rm -f $(ACCESSDAEMON)
uninstall_daemon_moved:
@echo "===> REMOVING access daemon from $(INSTALLED_ACCESSDAEMON)"
@rm -f $(INSTALLED_ACCESSDAEMON)
else
install_daemon:
@echo "===> No INSTALL of the access daemon"
move_daemon:
@echo "===> No MOVE of the access daemon"
uninstall_daemon:
@echo "===> No UNINSTALL of the access daemon"
uninstall_daemon_moved:
@echo "===> No UNINSTALL of the access daemon"
endif
else
install_daemon:
@echo "===> No INSTALL of the access daemon"
move_daemon:
@echo "===> No MOVE of the access daemon"
uninstall_daemon:
@echo "===> No UNINSTALL of the access daemon"
uninstall_daemon_moved:
@echo "===> No UNINSTALL of the access daemon"
endif
ifeq ($(BUILDFREQ),true)
ifneq ($(COMPILER),MIC)
install_freq:
@echo "===> INSTALL setFrequencies tool to $(PREFIX)/sbin/$(FREQ_TARGET)"
@mkdir -p $(PREFIX)/sbin
@install -m 4775 $(INSTALL_CHOWN) $(FREQ_TARGET) $(PREFIX)/sbin/$(FREQ_TARGET)
move_freq:
@echo "===> MOVE setFrequencies tool from $(PREFIX)/sbin/$(FREQ_TARGET) to $(INSTALLED_PREFIX)/sbin/$(FREQ_TARGET)"
@mkdir -p $(INSTALLED_PREFIX)/sbin
@install -m 4775 $(INSTALL_CHOWN) $(PREFIX)/sbin/$(FREQ_TARGET) $(INSTALLED_PREFIX)/sbin/$(FREQ_TARGET)
uninstall_freq:
@echo "===> REMOVING setFrequencies tool from $(PREFIX)/sbin/$(FREQ_TARGET)"
@rm -f $(PREFIX)/sbin/$(FREQ_TARGET)
uninstall_freq_moved:
@echo "===> REMOVING setFrequencies tool from $(INSTALLED_PREFIX)/sbin/$(FREQ_TARGET)"
@rm -f $(INSTALLED_PREFIX)/sbin/$(FREQ_TARGET)
else
install_freq:
@echo "===> No INSTALL of setFrequencies tool"
move_freq:
@echo "===> No MOVE of setFrequencies tool"
uninstall_freq:
@echo "===> No UNINSTALL of setFrequencies tool"
uninstall_freq_moved:
@echo "===> No UNINSTALL of setFrequencies tool"
endif
else
install_freq:
@echo "===> No INSTALL of setFrequencies tool"
move_freq:
@echo "===> No MOVE of setFrequencies tool"
uninstall_freq:
@echo "===> No UNINSTALL of setFrequencies tool"
uninstall_freq_moved:
@echo "===> No UNINSTALL of setFrequencies tool"
endif
install: install_daemon install_freq
@echo "===> INSTALL applications to $(BINPREFIX)"
@mkdir -p $(BINPREFIX)
@chmod 775 $(BINPREFIX)
@for APP in $(L_APPS); do \
install -m 755 $$APP $(BINPREFIX); \
done
@for APP in $(C_APPS); do \
install -m 755 $$APP $(BINPREFIX); \
done
@if [ "$(LUA_INTERNAL)" = "true" ]; then \
install -m 755 ext/lua/lua $(BINPREFIX)/$(LUA_LIB_NAME); \
fi
@echo "===> INSTALL helper applications to $(BINPREFIX)"
@install -m 755 perl/feedGnuplot $(BINPREFIX)
@echo "===> INSTALL lua to likwid interface to $(PREFIX)/share/lua"
@mkdir -p $(PREFIX)/share/lua
@chmod 775 $(PREFIX)/share/lua
@install -m 644 likwid.lua $(PREFIX)/share/lua
@echo "===> INSTALL libraries to $(LIBPREFIX)"
@mkdir -p $(LIBPREFIX)
@chmod 775 $(LIBPREFIX)
@install -m 755 $(TARGET_LIB) $(LIBPREFIX)/$(TARGET_LIB).$(VERSION).$(RELEASE)
@install -m 755 liblikwidpin.so $(LIBPREFIX)/liblikwidpin.so.$(VERSION).$(RELEASE)
@install -m 755 $(TARGET_HWLOC_LIB) $(LIBPREFIX)/$(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE)
@if [ "$(LUA_INTERNAL)" = "true" ]; then \
install -m 755 $(TARGET_LUA_LIB) $(LIBPREFIX)/$(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE); \
fi
@cd $(LIBPREFIX) && ln -fs $(TARGET_LIB).$(VERSION).$(RELEASE) $(TARGET_LIB)
@cd $(LIBPREFIX) && ln -fs $(TARGET_LIB).$(VERSION).$(RELEASE) $(TARGET_LIB).$(VERSION)
@cd $(LIBPREFIX) && ln -fs $(PINLIB).$(VERSION).$(RELEASE) $(PINLIB)
@cd $(LIBPREFIX) && ln -fs $(PINLIB).$(VERSION).$(RELEASE) $(PINLIB).$(VERSION)
@cd $(LIBPREFIX) && ln -fs $(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_HWLOC_LIB))
@cd $(LIBPREFIX) && ln -fs $(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_HWLOC_LIB)).$(VERSION)
@if [ "$(LUA_INTERNAL)" = "true" ]; then \
cd $(LIBPREFIX) && ln -fs $(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_LUA_LIB)); \
cd $(LIBPREFIX) && ln -fs $(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_LUA_LIB)).$(VERSION); \
fi
@echo "===> INSTALL man pages to $(MANPREFIX)/man1"
@mkdir -p $(MANPREFIX)/man1
@chmod 775 $(MANPREFIX)/man1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-topology.1 > $(MANPREFIX)/man1/likwid-topology.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" -e "s++$(PREFIX)+g" < $(DOC_DIR)/likwid-perfctr.1 > $(MANPREFIX)/man1/likwid-perfctr.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-powermeter.1 > $(MANPREFIX)/man1/likwid-powermeter.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-pin.1 > $(MANPREFIX)/man1/likwid-pin.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/feedGnuplot.1 > $(MANPREFIX)/man1/feedGnuplot.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-accessD.1 > $(MANPREFIX)/man1/likwid-accessD.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-genTopoCfg.1 > $(MANPREFIX)/man1/likwid-genTopoCfg.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-memsweeper.1 > $(MANPREFIX)/man1/likwid-memsweeper.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-mpirun.1 > $(MANPREFIX)/man1/likwid-mpirun.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-perfscope.1 > $(MANPREFIX)/man1/likwid-perfscope.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-setFreq.1 > $(MANPREFIX)/man1/likwid-setFreq.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-features.1 > $(MANPREFIX)/man1/likwid-features.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-bench.1 > $(MANPREFIX)/man1/likwid-bench.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-agent.1 > $(MANPREFIX)/man1/likwid-agent.1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-setFrequencies.1 > $(MANPREFIX)/man1/likwid-setFrequencies.1
@sed -e "s/.TH LUA/.TH LIKWID-LUA/g" -e "s/lua - Lua interpreter/likwid-lua - Lua interpreter included in LIKWID/g" -e "s/.B lua/.B likwid-lua/g" -e "s/.BR luac (1)//g" $(DOC_DIR)/likwid-lua.1 > $(MANPREFIX)/man1/likwid-lua.1
@chmod 644 $(MANPREFIX)/man1/likwid-*
@echo "===> INSTALL headers to $(PREFIX)/include"
@mkdir -p $(PREFIX)/include
@chmod 775 $(PREFIX)/include
@install -m 644 src/includes/likwid.h $(PREFIX)/include/
@install -m 644 src/includes/bstrlib.h $(PREFIX)/include/
$(FORTRAN_INSTALL)
@echo "===> INSTALL groups to $(PREFIX)/share/likwid/perfgroups"
@mkdir -p $(PREFIX)/share/likwid/perfgroups
@chmod 775 $(PREFIX)/share/likwid
@chmod 775 $(PREFIX)/share/likwid/perfgroups
@cp -rf groups/* $(PREFIX)/share/likwid/perfgroups
@chmod 775 $(PREFIX)/share/likwid/perfgroups/*
@find $(PREFIX)/share/likwid/perfgroups -name "*.txt" -exec chmod 644 {} \;
@echo "===> INSTALL monitoring groups to $(PREFIX)/share/likwid/mongroups"
@mkdir -p $(PREFIX)/share/likwid/mongroups
@chmod 775 $(PREFIX)/share/likwid/mongroups
@cp -rf monitoring/groups/* $(PREFIX)/share/likwid/mongroups
@chmod 775 $(PREFIX)/share/likwid/mongroups/*
@find $(PREFIX)/share/likwid/mongroups -name "*.txt" -exec chmod 644 {} \;
@mkdir -p $(PREFIX)/share/likwid/docs
@chmod 775 $(PREFIX)/share/likwid/docs
@install -m 644 doc/bstrlib.txt $(PREFIX)/share/likwid/docs
@mkdir -p $(PREFIX)/share/likwid/examples
@chmod 775 $(PREFIX)/share/likwid/examples
@install -m 644 examples/* $(PREFIX)/share/likwid/examples
@echo "===> INSTALL default likwid-agent.conf to $(PREFIX)/share/likwid/mongroups"
@sed -e "s++$(PREFIX)+g" monitoring/likwid-agent.conf > $(PREFIX)/share/likwid/mongroups/likwid-agent.conf
@chmod 644 $(PREFIX)/share/likwid/mongroups/likwid-agent.conf
@echo "===> INSTALL filters to $(abspath $(PREFIX)/share/likwid/filter)"
@mkdir -p $(abspath $(PREFIX)/share/likwid/filter)
@chmod 755 $(abspath $(PREFIX)/share/likwid/filter)
@for F in $(FILTERS); do \
install -m 755 $$F $(abspath $(PREFIX)/share/likwid/filter); \
done
move: move_daemon move_freq
@echo "===> MOVE applications from $(BINPREFIX) to $(INSTALLED_BINPREFIX)"
@mkdir -p $(INSTALLED_BINPREFIX)
@chmod 775 $(INSTALLED_BINPREFIX)
@for APP in $(L_APPS); do \
install -m 755 $(BINPREFIX)/$$APP $(INSTALLED_BINPREFIX); \
done
@for APP in $(C_APPS); do \
install -m 755 $(BINPREFIX)/`basename $$APP` $(INSTALLED_BINPREFIX); \
done
@install -m 755 $(BINPREFIX)/likwid-lua $(INSTALLED_BINPREFIX)/likwid-lua
@echo "===> MOVE helper applications from $(BINPREFIX) to $(INSTALLED_BINPREFIX)"
@install -m 755 $(BINPREFIX)/feedGnuplot $(INSTALLED_BINPREFIX)
@echo "===> MOVE lua to likwid interface from $(PREFIX)/share/lua to $(INSTALLED_PREFIX)/share/lua"
@mkdir -p $(INSTALLED_PREFIX)/share/lua
@chmod 775 $(INSTALLED_PREFIX)/share/lua
@install -m 644 $(PREFIX)/share/lua/likwid.lua $(INSTALLED_PREFIX)/share/lua
@echo "===> MOVE libraries from $(LIBPREFIX) to $(INSTALLED_LIBPREFIX)"
@mkdir -p $(INSTALLED_LIBPREFIX)
@chmod 775 $(INSTALLED_LIBPREFIX)
@install -m 755 $(LIBPREFIX)/$(TARGET_LIB).$(VERSION).$(RELEASE) $(INSTALLED_LIBPREFIX)/$(TARGET_LIB).$(VERSION).$(RELEASE)
@install -m 755 $(LIBPREFIX)/$(PINLIB).$(VERSION).$(RELEASE) $(INSTALLED_LIBPREFIX)/$(PINLIB).$(VERSION).$(RELEASE)
@install -m 755 $(LIBPREFIX)/$(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE) $(INSTALLED_LIBPREFIX)/$(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE)
@install -m 755 $(LIBPREFIX)/$(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE) $(INSTALLED_LIBPREFIX)/$(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE)
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(TARGET_LIB).$(VERSION).$(RELEASE) $(TARGET_LIB)
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(TARGET_LIB).$(VERSION).$(RELEASE) $(TARGET_LIB).$(VERSION)
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(PINLIB).$(VERSION).$(RELEASE) $(PINLIB)
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(PINLIB).$(VERSION).$(RELEASE) $(PINLIB).$(VERSION)
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_HWLOC_LIB))
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(shell basename $(TARGET_HWLOC_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_HWLOC_LIB)).$(VERSION)
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_LUA_LIB))
@cd $(INSTALLED_LIBPREFIX) && ln -fs $(shell basename $(TARGET_LUA_LIB)).$(VERSION).$(RELEASE) $(shell basename $(TARGET_LUA_LIB)).$(VERSION)
@echo "===> MOVE man pages from $(MANPREFIX)/man1 to $(INSTALLED_MANPREFIX)/man1"
@mkdir -p $(INSTALLED_MANPREFIX)/man1
@chmod 775 $(INSTALLED_MANPREFIX)/man1
@install -m 644 $(MANPREFIX)/man1/*.1 $(INSTALLED_MANPREFIX)/man1
@echo "===> MOVE headers from $(PREFIX)/include to $(INSTALLED_PREFIX)/include"
@mkdir -p $(INSTALLED_PREFIX)/include
@chmod 775 $(INSTALLED_PREFIX)/include
@install -m 644 $(PREFIX)/include/likwid.h $(INSTALLED_PREFIX)/include/likwid.h
@install -m 644 $(PREFIX)/include/bstrlib.h $(INSTALLED_PREFIX)/include/bstrlib.h
@if [ -e $(PREFIX)/include/likwid.mod ]; then install $(PREFIX)/include/likwid.mod $(INSTALLED_PREFIX)/include/likwid.mod; fi
@echo "===> MOVE groups from $(PREFIX)/share/likwid/perfgroups to $(INSTALLED_PREFIX)/share/likwid/perfgroups"
@mkdir -p $(INSTALLED_PREFIX)/share/likwid/perfgroups
@chmod 775 $(INSTALLED_PREFIX)/share/likwid
@chmod 775 $(INSTALLED_PREFIX)/share/likwid/perfgroups
@cp -rf $(PREFIX)/share/likwid/perfgroups/* $(INSTALLED_PREFIX)/share/likwid/perfgroups
@chmod 775 $(INSTALLED_PREFIX)/share/likwid/perfgroups/*
@find $(INSTALLED_PREFIX)/share/likwid/perfgroups -name "*.txt" -exec chmod 644 {} \;
@echo "===> MOVE monitoring groups from $(PREFIX)/share/likwid/mongroups to $(INSTALLED_PREFIX)/share/likwid/mongroups"
@mkdir -p $(INSTALLED_PREFIX)/share/likwid/mongroups
@chmod 775 $(INSTALLED_PREFIX)/share/likwid/mongroups
@cp -rf $(PREFIX)/share/likwid/mongroups/* $(INSTALLED_PREFIX)/share/likwid/mongroups
@chmod 775 $(INSTALLED_PREFIX)/share/likwid/mongroups/*
@find $(INSTALLED_PREFIX)/share/likwid/mongroups -name "*.txt" -exec chmod 644 {} \;
@mkdir -p $(INSTALLED_PREFIX)/share/likwid/docs
@chmod 775 $(INSTALLED_PREFIX)/share/likwid/docs
@install -m 644 $(PREFIX)/share/likwid/docs/bstrlib.txt $(INSTALLED_PREFIX)/share/likwid/docs
@mkdir -p $(INSTALLED_PREFIX)/share/likwid/examples
@chmod 775 $(INSTALLED_PREFIX)/share/likwid/examples
@install -m 644 examples/* $(INSTALLED_PREFIX)/share/likwid/examples
@echo "===> MOVE default likwid-agent.conf from $(PREFIX)/share/likwid/mongroups to $(INSTALLED_PREFIX)/share/likwid/mongroups"
@install $(PREFIX)/share/likwid/mongroups/likwid-agent.conf $(INSTALLED_PREFIX)/share/likwid/mongroups/likwid-agent.conf
@chmod 644 $(INSTALLED_PREFIX)/share/likwid/mongroups/likwid-agent.conf
@echo "===> MOVE filters from $(abspath $(PREFIX)/share/likwid/filter) to $(LIKWIDFILTERPATH)"
@mkdir -p $(LIKWIDFILTERPATH)
@chmod 755 $(LIKWIDFILTERPATH)
@cp -f $(abspath $(PREFIX)/share/likwid/filter)/* $(LIKWIDFILTERPATH)
@chmod 755 $(LIKWIDFILTERPATH)/*
uninstall: uninstall_daemon uninstall_freq
@echo "===> REMOVING applications from $(PREFIX)/bin"
@rm -f $(addprefix $(BINPREFIX)/,$(addsuffix .lua,$(L_APPS)))
@for APP in $(L_APPS); do \
rm -f $(BINPREFIX)/$$APP; \
done
@for APP in $(C_APPS); do \
rm -f $(BINPREFIX)/$$APP; \
done
@rm -f $(BINPREFIX)/feedGnuplot
@rm -f $(BINPREFIX)/likwid-lua
@rm -f $(BINPREFIX)/likwid-bench
@echo "===> REMOVING Lua to likwid interface from $(PREFIX)/share/lua"
@rm -rf $(PREFIX)/share/lua/likwid.lua
@echo "===> REMOVING libs from $(LIBPREFIX)"
@rm -f $(LIBPREFIX)/liblikwid*
@echo "===> REMOVING man pages from $(MANPREFIX)/man1"
@rm -f $(addprefix $(MANPREFIX)/man1/,$(addsuffix .1,$(L_APPS)))
@rm -f $(MANPREFIX)/man1/feedGnuplot.1
@rm -f $(MANPREFIX)/man1/likwid-setFreq.1
@rm -f $(MANPREFIX)/man1/likwid-accessD.1
@rm -f $(MANPREFIX)/man1/likwid-lua.1
@rm -f $(MANPREFIX)/man1/likwid-bench.1
@echo "===> REMOVING header from $(PREFIX)/include"
@rm -f $(PREFIX)/include/likwid.h
@rm -f $(PREFIX)/include/bstrlib.h
$(FORTRAN_REMOVE)
@echo "===> REMOVING filter, groups and default configs from $(PREFIX)/share/likwid"
@rm -rf $(abspath $(PREFIX)/share/likwid/filter)
@rm -rf $(PREFIX)/share/likwid/mongroups
@rm -rf $(PREFIX)/share/likwid/perfgroups
@rm -rf $(PREFIX)/share/likwid/docs
@rm -rf $(PREFIX)/share/likwid/examples
@rm -rf $(PREFIX)/share/likwid
uninstall_moved: uninstall_daemon_moved uninstall_freq_moved
@echo "===> REMOVING applications from $(INSTALLED_PREFIX)/bin"
@rm -f $(addprefix $(INSTALLED_BINPREFIX)/,$(addsuffix .lua,$(L_APPS)))
@for APP in $(L_APPS); do \
rm -f $(INSTALLED_BINPREFIX)/$$APP; \
done
@for APP in $(C_APPS); do \
rm -f $(INSTALLED_BINPREFIX)/$$APP; \
done
@rm -f $(INSTALLED_BINPREFIX)/feedGnuplot
@rm -f $(INSTALLED_BINPREFIX)/likwid-lua
@rm -f $(INSTALLED_BINPREFIX)/likwid-bench
@echo "===> REMOVING Lua to likwid interface from $(INSTALLED_PREFIX)/share/lua"
@rm -rf $(INSTALLED_PREFIX)/share/lua/likwid.lua
@echo "===> REMOVING libs from $(INSTALLED_LIBPREFIX)"
@rm -f $(INSTALLED_LIBPREFIX)/liblikwid*
@echo "===> REMOVING man pages from $(INSTALLED_MANPREFIX)/man1"
@rm -f $(addprefix $(INSTALLED_MANPREFIX)/man1/,$(addsuffix .1,$(L_APPS)))
@rm -f $(INSTALLED_MANPREFIX)/man1/feedGnuplot.1
@rm -f $(INSTALLED_MANPREFIX)/man1/likwid-setFreq.1
@rm -f $(INSTALLED_MANPREFIX)/man1/likwid-accessD.1
@rm -f $(INSTALLED_MANPREFIX)/man1/likwid-lua.1
@rm -f $(INSTALLED_MANPREFIX)/man1/likwid-bench.1
@echo "===> REMOVING header from $(INSTALLED_PREFIX)/include"
@rm -f $(INSTALLED_PREFIX)/include/likwid.h
@rm -f $(INSTALLED_PREFIX)/include/bstrlib.h
$(FORTRAN_REMOVE)
@echo "===> REMOVING filter, groups and default configs from $(INSTALLED_PREFIX)/share/likwid"
@rm -rf $(LIKWIDFILTERPATH)
@rm -rf $(INSTALLED_PREFIX)/share/likwid/mongroups
@rm -rf $(INSTALLED_PREFIX)/share/likwid/perfgroups
@rm -rf $(INSTALLED_PREFIX)/share/likwid/docs
@rm -rf $(INSTALLED_PREFIX)/share/likwid/examples
@rm -rf $(INSTALLED_PREFIX)/share/likwid
local: $(L_APPS) likwid.lua
@echo "===> Setting Lua scripts to run from current directory"
@PWD=$(shell pwd)
@for APP in $(L_APPS); do \
sed -i -e "s//$(VERSION)/g" -e "s//$(DATE)/g" -e "s//$(RELEASE)/g" -e "s+$(PREFIX)/bin/likwid-lua+$(PWD)/ext/lua/lua+" -e "s+$(PREFIX)/share/lua/?.lua+$(PWD)/?.lua+" -e "s+$(PREFIX)/bin/likwid-pin+$(PWD)/likwid-pin+" -e "s+$(PREFIX)/bin/likwid-perfctr+$(PWD)/likwid-perfctr+" $$APP; \
chmod +x $$APP; \
done
@sed -i -e "s//$(VERSION)/g" -e "s//$(DATE)/g" -e "s//$(RELEASE)/g" -e "s+$(PREFIX)/lib+$(PWD)+g" -e "s+$(PREFIX)/share/likwid/perfgroups+$(PWD)/groups+g" likwid.lua;
@sed -i -e "s+$(PREFIX)/share/likwid/mongroups+$(PWD)/monitoring/groups+g" likwid-agent
@ln -sf liblikwid.so liblikwid.so.$(VERSION)
@ln -sf ext/hwloc/liblikwid-hwloc.so liblikwid-hwloc.so.$(VERSION)
@ln -sf ext/lua/liblikwid-lua.so liblikwid-lua.so.$(VERSION)
@ln -sf liblikwid.so liblikwid.so.$(VERSION).$(RELEASE)
@ln -sf ext/hwloc/liblikwid-hwloc.so liblikwid-hwloc.so.$(VERSION).$(RELEASE)
@ln -sf ext/lua/liblikwid-lua.so liblikwid-lua.so.$(VERSION).$(RELEASE)
@echo "export LD_LIBRARY_PATH=$(PWD):$$LD_LIBRARY_PATH"
testit: test/test-likwidAPI.c
make -C test test-likwidAPI
test/test-likwidAPI
make -C test/executable_tests
help:
@echo "Help for building LIKWID:"
@echo
@echo "Common make targets:"
@echo "- make : build anything (integrate already compiled files)"
@echo "- make clean : clean library and executables, keep compiled files"
@echo "- make distclean : clean anything"
@echo "- make docs : Build documentation (requires Doxygen)"
@echo "- make install : Copy compiled files to $(PREFIX)"
@echo "- make move : Copy files from $(PREFIX) to $(INSTALLED_PREFIX)"
@echo "- make uninstall : Delete files from $(PREFIX)"
@echo "- make uninstall_moved : Delete files from $(INSTALLED_PREFIX)"
@echo
@echo "Compiler selection can be done in config.mk at COMPILER:"
@echo "- GCC : Use GCC for C code and Intel Fortran compiler for Fortran interface (default)"
@echo "- GCCX86 : Use GCC for C code. No Fortran compiler set (only for 32 bit builds)"
@echo "- CLANG: Use CLANG for C code and Intel Fortran compiler for Fortran interface (unsupported, may fail)"
@echo "- ICC: Use Intel C compiler for C code and Intel Fortran compiler for Fortran interface (unsupported, may fail)"
@echo "- MIC: Build for Intel Xeon Phi. Use Intel C compiler for C code and\n Intel Fortran compiler for Fortran interface (unsupported)"
@echo
@echo "LIKWID runs only in INSTALLED_PREFIX = $(INSTALLED_PREFIX)"
@echo "You can change it in config.mk, but it is recommended to keep INSTALLED_PREFIX = PREFIX"
@echo "The PREFIX is used for temporary install directories (e.g. for packaging)."
@echo "LIKWID will not run in PREFIX, it has to be in INSTALLED_PREFIX."
@echo "The common configuration is INSTALLED_PREFIX = PREFIX, so changing PREFIX is enough."
@echo "If PREFIX and INSTALLED_PREFIX differ, you have to move anything after 'make install' to"
@echo "the INSTALLED_PREFIX. You can also use 'make move' which does the job for you."
likwid-4.2.0/README.md 0000664 0000000 0000000 00000006467 13026742577 0014311 0 ustar 00root root 0000000 0000000 --------------------------------------------------------------------------------
Introduction
--------------------------------------------------------------------------------
Likwid is a simple to install and use toolsuite of command line applications
for performance oriented programmers. It works for Intel and AMD processors
on the Linux operating system.
[](https://travis-ci.org/RRZE-HPC/likwid)
It consists of:
- likwid-topology: print thread, cache and NUMA topology
- likwid-perfctr: configure and read out hardware performance counters on Intel and AMD processors
- likwid-powermeter: read out RAPL Energy information and get info about Turbo mode steps
- likwid-pin: pin your threaded application (pthread, Intel and gcc OpenMP to dedicated processors)
- likwid-bench: Micro benchmarking platform
- likwid-features: Print and manipulate cpu features like hardware prefetchers
- likwid-genTopoCfg: Dumps topology information to a file
- likwid-mpirun: Wrapper to start MPI and Hybrid MPI/OpenMP applications (Supports Intel MPI, OpenMPI and MPICH)
- likwid-perfscope: Frontend to the timeline mode of likwid-perfctr, plots live graphs of performance metrics using gnuplot
- likwid-agent: Monitoring agent for hardware performance counters
- likwid-memsweeper: Sweep memory of NUMA domains and evict cachelines from the last level cache
- likwid-setFrequencies: Tool to control the CPU frequency
--------------------------------------------------------------------------------
Download, Build and Install
--------------------------------------------------------------------------------
You can get the releases of LIKWID at:
http://ftp.fau.de/pub/likwid/
For build and installation hints see INSTALL file or check the build instructions
page in the wiki https://github.com/RRZE-HPC/likwid/wiki/Build
--------------------------------------------------------------------------------
Documentation
--------------------------------------------------------------------------------
For a detailed documentation on the usage of the tools have a look at the
html documentation build with doxygen. Call
make docs
or after installation, look at the man pages.
There is also a wiki at the github page:
https://github.com/rrze-likwid/likwid/wiki
If you have problems or suggestions please let me know on the likwid mailing list:
http://groups.google.com/group/likwid-users
or if it is bug, add an issue at:
https://github.com/rrze-likwid/likwid/issues
--------------------------------------------------------------------------------
Extras
--------------------------------------------------------------------------------
- If you want to use the Marker API with Java, you can find the Java module here:
https://github.com/jlewandowski/likwid-java-api
- For Python you can find an interface to the LIKWID API here:
https://github.com/TomTheBear/likwid-python-api
--------------------------------------------------------------------------------
Survey
--------------------------------------------------------------------------------
We opened a survey at the user mailing list to get a feeling who uses LIKWID and how.
Moreover we would be interested if you are missing a feature or what annoys you when using LIKWID.
Link to the survey:
https://groups.google.com/forum/#!topic/likwid-users/F7TDho3k7ps
likwid-4.2.0/bench/ 0000775 0000000 0000000 00000000000 13026742577 0014074 5 ustar 00root root 0000000 0000000 likwid-4.2.0/bench/Makefile 0000664 0000000 0000000 00000010435 13026742577 0015537 0 ustar 00root root 0000000 0000000 #
# =======================================================================================
#
# Filename: Makefile
#
# Description: likwid-bench Makefile
#
# Version:
# Released:
#
# Author: Jan Treibig (jt), jan.treibig@gmail.com
# Project: likwid
#
# Copyright (C) 2016 Jan Treibig
#
# This program is free software: you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation, either version 3 of the License, or (at your option) any later
# version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# this program. If not, see .
#
# =======================================================================================
SRC_DIR = ./src
MAKE_DIR = ../make
#DO NOT EDIT BELOW
# Dependency chains:
# *.[ch] -> *.o -> executables
# *.ptt -> *.pas -> *.s -> *.o -> executables
# *.txt -> *.h (generated)
include ../config.mk
include $(MAKE_DIR)/include_$(COMPILER).mk
include $(MAKE_DIR)/config_checks.mk
include $(MAKE_DIR)/config_defines.mk
#INCLUDES += -I./includes -I../src/includes -I../ext/hwloc/include -I../$(COMPILER) -I$(BUILD_DIR)
INCLUDES += -I./includes -I$(BUILD_DIR) -I../src/includes
LIBS +=
CFLAGS := $(filter-out -fvisibility=hidden, $(CFLAGS))
#CONFIGURE BUILD SYSTEM
BUILD_DIR = ./$(COMPILER)
Q ?= @
ifeq ($(COMPILER),MIC)
BENCH_DIR = ./phi
else
ifeq ($(COMPILER),GCCX86)
BENCH_DIR = ./x86
else
BENCH_DIR = ./x86-64
endif
endif
SHARED_TARGET_LIB := -L.. -L../ext/hwloc/ -L$(LUA_LIB_DIR) -llikwid -llikwid-hwloc -l$(LUA_LIB_NAME)
STATIC_TARGET_LIB := ../liblikwid.a ../ext/hwloc/liblikwid-hwloc.a $(LUA_LIB_DIR)/lib$(LUA_LIB_NAME).a
TARGET_LIB = $(SHARED_TARGET_LIB)
BENCH_LIBS :=
ifeq ($(INSTRUMENT_BENCH),true)
DEFINES += -DLIKWID_PERFMON
endif
ifeq ($(DEBUG),true)
DEBUG_FLAGS = -g
DEFINES += -DDEBUG_LIKWID
else
DEBUG_FLAGS =
endif
VPATH = $(SRC_DIR)
OBJ = $(patsubst $(SRC_DIR)/%.c, $(BUILD_DIR)/%.o,$(wildcard $(SRC_DIR)/*.c))
ifeq ($(SHARED_LIBRARY),false)
OBJ := $(filter-out $(BUILD_DIR)/bstrlib.o,$(OBJ))
TARGET_LIB = $(STATIC_TARGET_LIB)
endif
OBJ_BENCH = $(patsubst $(BENCH_DIR)/%.ptt, $(BUILD_DIR)/%.o,$(wildcard $(BENCH_DIR)/*.ptt))
BENCH = $(shell basename $(BENCH_TARGET))
CPPFLAGS := $(CPPFLAGS) $(DEFINES) $(INCLUDES)
all: $(BUILD_DIR) $(OBJ) $(OBJ_BENCH) $(BENCH_TARGET)
$(BENCH_TARGET): $(BENCH)
$(BENCH): likwid-bench.c $(BUILD_DIR) $(OBJ) $(OBJ_BENCH)
@echo "===> LINKING $(BENCH)"
$(Q)${CC} $(DEBUG_FLAGS) $(CFLAGS) $(ANSI_CFLAGS) $(CPPFLAGS) ${LFLAGS} likwid-bench.c $(BENCH_LIBS) $(OBJ_BENCH) $(OBJ) -o $(BENCH) $(TARGET_LIB) $(LIBS) $(RPATHS)
$(BUILD_DIR):
@mkdir $(BUILD_DIR)
#PATTERN RULES
$(BUILD_DIR)/%.o: %.c
@echo "===> COMPILE C $@"
$(Q)$(CC) -g -c $(DEBUG_FLAGS) $(CFLAGS) $(ANSI_CFLAGS) $(CPPFLAGS) $(TARGET_LIB) $< -o $@
$(Q)$(CC) -g $(DEBUG_FLAGS) $(CPPFLAGS) -MT $(@:.d=.o) -MM $< > $(BUILD_DIR)/$*.d
$(BUILD_DIR)/%.pas: $(BENCH_DIR)/%.ptt
@echo "===> GENERATE BENCHMARKS"
$(Q)$(GEN_PAS) $(BENCH_DIR) $(BUILD_DIR) ./perl/templates
$(BUILD_DIR)/%.o: $(BUILD_DIR)/%.pas
@echo "===> ASSEMBLE $@"
$(Q)$(PAS) -i $(PASFLAGS) -o $(BUILD_DIR)/$*.s $< '$(DEFINES)'
$(Q)$(AS) $(ASFLAGS) $(BUILD_DIR)/$*.s -o $@
ifeq ($(findstring $(MAKECMDGOALS),clean),)
-include $(OBJ:.o=.d)
endif
.PHONY: clean distclean install uninstall
.PRECIOUS: $(BUILD_DIR)/%.pas
.NOTPARALLEL:
clean:
@rm -rf likwid-bench
distclean:
@rm -rf $(BUILD_DIR)
@rm -rf likwid-bench
install:
@echo "===> INSTALL applications to $(BINPREFIX)"
cp -f likwid-bench $(BINPREFIX)
@echo "===> INSTALL man pages to $(MANPREFIX)/man1"
@mkdir -p $(MANPREFIX)/man1
@sed -e "s//$(VERSION)/g" -e "s//$(DATE)/g" < $(DOC_DIR)/likwid-bench.1 > $(MANPREFIX)/man1/likwid-bench.1
uninstall:
@echo "===> REMOVING applications from $(BINPREFIX)"
rm -rf $(BINPREFIX)/likwid-bench
@echo "===> REMOVING man pages from $(MANPREFIX)/man1"
@rm -f $(MANPREFIX)/man1/likwid-bench.1
likwid-4.2.0/bench/includes/ 0000775 0000000 0000000 00000000000 13026742577 0015702 5 ustar 00root root 0000000 0000000 likwid-4.2.0/bench/includes/allocator.h 0000664 0000000 0000000 00000003261 13026742577 0020035 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: allocator.h
*
* Description: Header File allocator Module.
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: none
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef ALLOCATOR_H
#define ALLOCATOR_H
#include
#include
#include
#define LLU_CAST (unsigned long long)
extern void allocator_init(int numVectors);
extern void allocator_finalize();
extern size_t allocator_dataTypeLength(DataType type);
extern void allocator_allocateVector(void** ptr,
int alignment,
uint64_t size,
int offset,
DataType type,
int stride,
bstring domain);
#endif /*ALLOCATOR_H*/
likwid-4.2.0/bench/includes/allocator_types.h 0000664 0000000 0000000 00000002600 13026742577 0021255 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: allocator_types.h
*
* Description: Header File types of allocator Module.
*
* Version:
* Released:
*
* Author: Thomas Roehl (tr), thomas.roehl@googlemail.com
* Project: none
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef ALLOCATOR_TYPES_H
#define ALLOCATOR_TYPES_H
#include
#include
typedef struct {
void* ptr;
size_t size;
off_t offset;
DataType type;
} allocation;
#endif
likwid-4.2.0/bench/includes/barrier.h 0000664 0000000 0000000 00000003603 13026742577 0017503 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: barrier.h
*
* Description: Header File barrier Module
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef BARRIER_H
#define BARRIER_H
#include
/**
* @brief Initialize the barrier module
* @param numberOfThreads The total number of threads in the barrier
*/
extern void barrier_init(int numberOfGroups);
/**
* @brief Register a thread for a barrier
* @param threadId The id of the thread to register
*/
extern int barrier_registerGroup(int numThreads);
extern void barrier_registerThread(BarrierData* barr, int groupsId, int threadId);
/**
* @brief Synchronize threads
* @param threadId The id of the calling thread
* @param numberOfThreads Total number of threads in the barrier
*/
extern void barrier_synchronize(BarrierData* barr);
extern void barrier_destroy(BarrierData* barr);
#endif /*BARRIER_H*/
likwid-4.2.0/bench/includes/barrier_types.h 0000664 0000000 0000000 00000002777 13026742577 0020742 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: barrier_types.h
*
* Description: Type Definitions for barrier Module
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef BARRIER_TYPES_H
#define BARRIER_TYPES_H
#include
typedef struct {
int numberOfThreads;
int offset;
int val;
int* index;
volatile int* bval;
} BarrierData;
typedef struct {
int* groupBval;
int numberOfThreads;
} BarrierGroup;
#endif /*BARRIER_TYPES_H*/
likwid-4.2.0/bench/includes/bstrlib.h 0000777 0000000 0000000 00000000000 13026742577 0024344 2../../src/includes/bstrlib.h ustar 00root root 0000000 0000000 likwid-4.2.0/bench/includes/likwid.h 0000777 0000000 0000000 00000000000 13026742577 0024010 2../../src/includes/likwid.h ustar 00root root 0000000 0000000 likwid-4.2.0/bench/includes/strUtil.h 0000664 0000000 0000000 00000003370 13026742577 0017524 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
* Filename: strUtil.h
*
* Description: Some sting functions
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef STRUTIL_H
#define STRUTIL_H
#include
#include
#include
#include
#include
#include
#include
#include
typedef struct {
bstring domain;
int offset;
void* ptr;
} Stream;
typedef struct {
uint32_t numberOfThreads;
int* processorIds;
uint64_t size;
Stream* streams;
} Workgroup;
extern int bstr_to_workgroup(Workgroup* group, const_bstring str, DataType type, int numberOfStreams);
extern void workgroups_destroy(Workgroup** groupList, int numberOfGroups, int numberOfStreams);
#endif
likwid-4.2.0/bench/includes/test_types.h 0000664 0000000 0000000 00000004724 13026742577 0020265 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: test_types.h
*
* Description: Type definitions for benchmarking framework
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef TEST_TYPES_H
#define TEST_TYPES_H
#include
#include
typedef void (*FuncPrototype)();
typedef enum {
SINGLE = 0,
DOUBLE,
INT} DataType;
typedef enum {
STREAM_1 = 1,
STREAM_2,
STREAM_3,
STREAM_4,
STREAM_5,
STREAM_6,
STREAM_7,
STREAM_8,
STREAM_9,
STREAM_10,
STREAM_11,
STREAM_12,
STREAM_13,
STREAM_14,
STREAM_15,
STREAM_16,
STREAM_17,
STREAM_18,
STREAM_19,
STREAM_20,
STREAM_21,
STREAM_22,
STREAM_23,
STREAM_24,
STREAM_25,
STREAM_26,
STREAM_27,
STREAM_28,
STREAM_29,
STREAM_30,
STREAM_31,
STREAM_32,
STREAM_33,
STREAM_34,
STREAM_35,
STREAM_36,
STREAM_37,
STREAM_38,
MAX_STREAMS} Pattern;
typedef struct {
char* name;
Pattern streams;
DataType type ;
int stride;
FuncPrototype kernel;
int flops;
int bytes;
char* desc;
int loads;
int stores;
int branches;
int instr_const;
int instr_loop;
int uops;
} TestCase;
typedef struct {
uint64_t size;
uint64_t iter;
uint32_t min_runtime;
const TestCase* test;
uint64_t cycles;
uint32_t numberOfThreads;
int* processors;
void** streams;
} ThreadUserData;
#endif /*TEST_TYPES_H*/
likwid-4.2.0/bench/includes/threads.h 0000664 0000000 0000000 00000006535 13026742577 0017516 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: threads.h
*
* Description: Header file of pthread interface module
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef THREADS_H
#define THREADS_H
#include
#include
#define THREADS_BARRIER pthread_barrier_wait(&threads_barrier)
#define MIN_ITERATIONS 10
extern pthread_barrier_t threads_barrier;
extern ThreadData* threads_data;
extern ThreadGroup* threads_groups;
/**
* @brief Test the maximal possible thread count
* @return numberOfThreads The number of available threads
*/
extern int threads_test(void);
/**
* @brief Initialization of the thread module
* @param numberOfThreads The total number of threads
*/
extern void threads_init(int numberOfThreads);
/**
* @brief Create all threads
* @param startRoutine thread entry function pointer
*/
extern void threads_create(void *(*startRoutine)(void*));
/**
* @brief Register User thread data for all threads
* @param data Reference to the user data structo
* @param func Optional function pointer to copy data
*/
extern void threads_registerDataAll(
ThreadUserData* data,
threads_copyDataFunc func);
/**
* @brief Register User thread data for one thread
* @param threadId thread Id
* @param data Reference to the user data structo
* @param func Optional function pointer to copy data
*/
extern void threads_registerDataThread(
int threadId,
ThreadUserData* data,
threads_copyDataFunc func);
/**
* @brief Register User thread data for a thread group
* @param groupId group Id
* @param data Reference to the user data structo
* @param func Optional function pointer to copy data
*/
extern void threads_registerDataGroup(
int groupId,
ThreadUserData* data,
threads_copyDataFunc func);
extern size_t threads_updateIterations(int groupId, size_t demandIter);
/**
* @brief Join the threads and free pthread related data structures
* @param
*/
extern void threads_join(void);
/**
* @brief Free memory of thread data structures
* @param numberOfGroups The number of groups to destroy
*/
extern void threads_destroy(int numberOfGroups, int numberOfStreams);
/**
* @brief Create Thread groups
* @param numberOfGroups The number of groups to create
*/
extern void threads_createGroups(int numberOfGroups);
#endif /* THREADS_H */
likwid-4.2.0/bench/includes/threads_types.h 0000664 0000000 0000000 00000003340 13026742577 0020731 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: threads_types.h
*
* Description: Types file for threads module.
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
#ifndef THREADS_TYPES_H
#define THREADS_TYPES_H
#include
#include
typedef struct {
int globalNumberOfThreads;
int numberOfThreads;
int globalThreadId;
int threadId;
int numberOfGroups;
int groupId;
double time;
uint64_t cycles;
ThreadUserData data;
} ThreadData;
typedef struct {
int numberOfThreads;
int* threadIds;
} ThreadGroup;
typedef void (*threads_copyDataFunc)(ThreadUserData* src,ThreadUserData* dst);
#endif /*THREADS_TYPES_H*/
likwid-4.2.0/bench/likwid-bench.c 0000664 0000000 0000000 00000050715 13026742577 0016610 0 ustar 00root root 0000000 0000000 /*
* =======================================================================================
*
* Filename: likwid-bench.c
*
* Description: A flexible and extensible benchmarking toolbox
*
* Version:
* Released:
*
* Author: Jan Treibig (jt), jan.treibig@gmail.com
* Project: likwid
*
* Copyright (C) 2016 RRZE, University Erlangen-Nuremberg
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
* PARTICULAR PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see .
*
* =======================================================================================
*/
/* ##### HEADER FILE INCLUDES ######################################### */
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
extern void* runTest(void* arg);
extern void* getIterSingle(void* arg);
/* ##### MACROS - LOCAL TO THIS SOURCE FILE ######################### */
#define HELP_MSG printf("Threaded Memory Hierarchy Benchmark -- Version %d.%d \n\n",VERSION,RELEASE); \
printf("\n"); \
printf("Supported Options:\n"); \
printf("-h\t\t Help message\n"); \
printf("-a\t\t List available benchmarks \n"); \
printf("-d\t\t Delimiter used for physical core list (default ,) \n"); \
printf("-p\t\t List available thread domains\n"); \
printf("\t\t or the physical ids of the cores selected by the -c expression \n"); \
printf("-s